LATTICE FPGA-UG-02042-26.4 Uaea Polokalama

Fa'ailoga

Lattice e le faia se fa'amaoniga, fa'atusa, po'o se fa'amaoniga e uiga i le sa'o o fa'amatalaga o lo'o i totonu o lenei pepa po'o le talafeagai o ana oloa mo so'o se fa'amoemoega. O faʻamatalaga uma i totonu o loʻo tuʻuina atu AS IS ma faʻaletonu uma, ma o faʻafitauli uma e fesoʻotaʻi ma ia faʻamatalaga o loʻo faʻatasi uma i le Faʻatau. E le tatau ona fa'alagolago le tagata fa'atau i so'o se fa'amatalaga ma fa'atinoga fa'atinoga po'o ta'iala o lo'o tu'uina atu ii. O oloa na fa'atau atu e Lattice ua fa'atatau i fa'ata'ita'iga fa'atapula'aina ma o le matafaioi a le Fa'atau le fa'atatauina tuto'atasi le talafeagai o so'o se oloa ma fa'ata'ita'i ma fa'amaonia tutusa. Leai se oloa Lattice e tatau ona fa'aoga fa'atasi ma le misiona-po'o le saogalemu-taumafa'i po'o so'o se isi lava talosaga e mafai ai e le toilalo o le oloa a le Lattice ona tupu ai se tulaga e ono tula'i mai ai se manu'a a le tagata lava ia, maliu, meatotino matuia po'o le fa'aleagaina o le siosiomaga. O faʻamatalaga o loʻo tuʻuina atu i totonu o lenei pepa e faʻatatau i le Lattice Semiconductor, ma o Lattice e iai le aia tatau e fai ai soʻo se suiga i faʻamatalaga i totonu o lenei pepa poʻo soʻo se oloa i soo se taimi e aunoa ma se faʻaaliga.

Vaega

• Lagolago mo oloa uma Lattice programmable
  • 2.5 V i le 3.3 V I2C polokalame (HW-USBN-2B)
  • 1.2 V i le 3.3 VJTAG ma polokalame SPI (HW-USBN-2B)
  • 1.2 V i le 5 VJTAG ma polokalame SPI (isi uma uaea)
  • Lelei mo le mamanu faʻataʻitaʻiga ma le faʻapipiʻiina
• Feso'ota'i i feso'ota'iga PC se tele
  • USB (v.1.0, v.2.0)
  • Taulaga Fa'atasi PC
• Fa'aoga polokalame feso'ota'iga faigofie
  • Uaea lele felavasa'i, 2 x 5 (.100") po'o le 1 x 8 (.100") feso'ota'iga
  • 6 futu (2 mita) pe sili atu le umi o le uaea polokalame (PC i le DUT)
• Faufale e leai se ta'ita'i/RoHS

Uaea Polokalama

Lattice Programming Cable oloa o feso'ota'iga meafaigaluega mo polokalame i totonu o masini o masini Lattice uma. A uma ona e faʻamaeʻaina lau mamanu faʻapitoa ma fai se polokalame file fa'atasi ai ma le Lattice Diamond®/ispLEVER® Classic mea faigaluega tau atina'e, e mafai ona e fa'aogaina le Diamond Programmer po'o le ispVM™ System software e fa'apolokalame ai masini i luga o lau laupapa. O le ispVM System/Diamond Programmer software e otometi lava ona fa'atupuina fa'atonuga polokalame talafeagai, tuatusi fa'apolokalame ma fa'amaumauga fa'apolokalame e fa'atatau i fa'amatalaga o lo'o teuina i le polokalame. file ma tapula'a e te seti i le Diamond Programmer/ispVM System. E fa'atupuina fa'ailoga fa'apolokalame mai le USB po'o le uafu fa'atusa o se PC ma fa'atonu atu i le uaea polokalame i le masini. Leai ni vaega fa'aopoopo e mana'omia mo polokalame.
Diamond Programmer/ispVM System software o loʻo aofia uma i Lattice design tool tool ma o loʻo avanoa mo le download mai le Lattice web nofoaga i www.latticesemi.com/programmer.

Polokalame Cable Pin Fa'auigaga

O galuega fa'atino e tu'uina atu e laina fa'apolokalame e fetaui ma galuega o lo'o avanoa ile Lattice programmable device. Talu ai o nisi masini o loʻo i ai vaega eseese o polokalame, o galuega faʻapitoa e tuʻuina atu e le uaea polokalame e mafai ona faʻalagolago i le masini faʻatulagaina filifilia. ispVM System/Diamond Programmer software e otometi lava ona gaosia galuega talafeagai e faavae i luga o le masini filifilia. Va'ai le Laulau 3.1 mo le fa'asiliview o galuega tauave uaea polokalame.
Laulau 3.1. Polokalame Cable Pin Fa'auigaga.

Pini Uaea Polokalame	Igoa	Polokalame Cable Pin Ituaiga	Fa'amatalaga
VCC	Polokalama Voltage	Ulufale	Fa'afeso'ota'i i VCCIO po'o VCCJ va'alele o le masini fa'atatau. ICC masani = 10 mA. Le laupapa sini maua le VCC sapalai/fa'asinoga mo le uaea.
TDO/SO	Su'ega Fa'amatalaga Fa'amatalaga	Ulufale	Fa'aaoga e sui ai fa'amatalaga e ala ile IEEE1149.1 (JTAG) tulaga fa'apolokalame.
TDI/SI	Su'ega Fa'amatalaga Fa'amatalaga	Tuuina atu	Fa'aaoga e sui fa'amaumauga i totonu e ala i le IEEE1149.1 fa'asologa o polokalame.
ISPEN/PROG	Fa'amalo	Tuuina atu	Fa'ataga le masini e fa'apolokalameina. E galue foi e pei o SN/SSPI Chip Select mo polokalame SPI ma HW-USBN-2B.
TRST	Toe Toe Su'ega	Tuuina atu	Filifiliga IEEE 1149.1 toe setiina masini setete.
FAIA	FAIA	Ulufale	FAIA e fa'ailoa ai le tulaga o le fa'atulagaina
TMS	Faiga Su'ega Filifili Fa'aofi	Tuuina atu	Faʻaaogaina e pulea ai le IEEE1149.1 state machine.
GND	eleele	Ulufale	Faʻafesoʻotaʻi i le eleele vaalele o le masini sini
TCK/SCLK	Su'ega Uati Ulufale	Tuuina atu	Fa'aaoga e fa'agata ai le masini IEEE1149.1
INIT	Fa'amuamua	Ulufale	Fa'ailoa mai ua sauni le masini mo le fa'atulagaina e amata. INITN e maua na'o nisi masini.
I2C: SCL*	I2C SCL	Tuuina atu	Tuuina atu le faailo I2C SCL
I2C: SDA*	I2C SDA	Tuuina atu	Tuuina atu le I2C faailo SDA.
5 V IFO*	5 V I fafo	Tuuina atu	Tuuina atu se faailo 5 V mo le iCEprogM1050 Programmer.

Manatua: Na'o maua i le HW-USBN-2B uaea.

Fa'aaliga: Manaomia Diamond Programmer 3.1 pe mulimuli ane.

Ata 3.2. Uaea Polokalame I totonu o le Faiga Fa'apolokalame Fa'afeso'ota'i mo le PC (HW-USB-1A po'o le HW-USB-2A)*
Manatua: Lattice PAC-Designer® software e le lagolagoina polokalame ma uaea USB. Ina ia fa'apolokalame masini ispPAC i nei uaea, fa'aoga le polokalame a le Diamond Programmer/ispVM System.

Manatua: HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C ma HW-DLN-3C o oloa e tutusa lelei.

Ata 3.4. Polokalame Cable In-System Programming Interface mo le PC (pDS4102-DL2 poʻo pDS4102-DL2A)

Ata 3.5. Polokalame Cable In-System Programming Interface mo le PC (HW7265-DL2 poʻo HW7265-DL2A)*

Fa'aaliga: Mo fa'amoemoega fa'asino, o le so'otaga 2 x 10 i le HW7265-DL2 po'o le HW7265-DL2A e tutusa ma Tyco 102387-1. Ole mea lea ole a fa'afeso'ota'i ile tulaga masani ole 100-mil spacing 2 x 5 ulutala, po'o le 2 x 5 ki, so'otaga male fa'amuta pei ole 3M N2510-5002RB.

Polokalama Polokalama

Diamond Programmer ma le ispVM System for Classic devices o le polokalame e sili ona lelei mo le puleaina o polokalame mo masini Lattice ma la'u mai uaea. Ole lomiga lata mai ole Lattice Diamond Programmer po'o le ispVM System software e avanoa mo le la'uina mai le Lattice web nofoaga ile www.latticesemi.com/programmer.

Fuafuaga Fuafuaga a le Komiti Fa'atonu

O le 4.7 kΩ toso i lalo e fautuaina i luga o le TCK fesoʻotaʻiga o le laupapa faʻamoemoe. O lenei toso i lalo e fautuaina ina ia aloese mai le faʻafuaseʻi o le faʻamalama o le TAP pule faʻaosoina e pito vave o le uati poʻo le VCC ramps luga. O lenei toso i lalo e fautuaina mo aiga Lattice uma e mafai ona polokalame.
O fa'ailoga I2C SCL ma SDA o lo'o tatala alavai. E mana'omia le 2.2 kΩ toso i luga i le VCC i luga o le laupapa fa'atatau. Na'o VCC tau o le 3.3 V ma le 2.5 V mo I2C o lo'o lagolagoina e le HW-USBN-2B uaea.
Mo aiga masini Lattice e maualalo le malosi, e fautuaina e faʻaopoopo se 500 Ω tetee i le va o le VCCJ ma le GND i le taimi o le polokalame pe a fesoʻotaʻi le USB programming cable i se mamanu laupapa eletise maualalo. O lo'o maua se FAQ e talanoaina atili ai lenei mea ile:
http://www.latticesemi.com/en/Support/AnswerDatabase/2/2/0/2205
O le JTAG e ono mana'omia le fa'atonutonuina o le saosaoa o le taulaga polokalame pe a fa'aogaina uaea polokalame e feso'ota'i atu i PCB fa'atau. E taua tele lenei mea pe a umi le taʻavale PCB poʻo le tele o masini filifili daisy. O le polokalame Lattice polokalame e mafai ona fetuutuunai le taimi o le TCK e faʻaaogaina i le JTAG polokalame uafu mai le uaea. O lenei faʻatulagaina o le taulaga maualalo o le TCK e faʻalagolago i le tele o mea, e aofia ai le saoasaoa o le PC ma le ituaiga o uaea faʻaaogaina (tulaga tutusa, USB poʻo USB2). O le polokalame lea e maua ai se filifiliga e fa'agesegese ai le TCK mo le debug po'o si'osi'omaga pisapisao. O lo'o maua se FAQ e talanoaina atili ai lenei mea ile: http://www.latticesemi.com/en/Support/AnswerDatabase/9/7/974.aspx
O le USB download cable e mafai ona fa'aoga e fa'apolokalame ai le Power Manager po'o le ispClock oloa ma le Lattice programming software. A fa'aogaina le uaea USB ma le Power Manager I masini, (POWR604, POWR1208, POWR1208P1), e tatau ona e fa'agesegese le TCK i se vaega o le 2. O lo'o maua se FAQ e talanoaina atili ai lenei mea i:
http://www.latticesemi.com/en/Support/AnswerDatabase/3/0/306.aspx

Polokalama Flywire ma So'oga Fa'asinomaga

Va'ai ile Laulau 6.1 e iloa ai, ile masini Lattice, pe fa'afefea ona fa'afeso'ota'i uaea lele lele o polokalame Lattice. JTAG, SPI ma le I2C faʻatulagaina faʻamaonia manino. Legacy cables and hardware o lo'o iai mo fa'amatalaga. E le gata i lea, ua fa'avasegaina fa'auluuluga eseese.
Laulau 6.1. Fa'asinomaga Pin ma Uaea

HW-USBN-2B Lanu lele	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	FAIA	TRST(OUTPUT)	VCC	GND	I2C
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama	Lanu moaga	Lanu meamata	Lanu mumu	Lanu uliuli	Lanu samasama
HW-USBN-2A Lanu lele	TDI	TDO	TMS	TCK	ispEN/PROG	INIT	TRST(AUAFUAGA)/FA'AI(FAAUTOGA)	VCC	GND
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama	Lanu moaga	Lanu meamata	Lanu mumu	Lanu uliuli
HW-DLN-3C Lanu lele	TDI	TDO	TMS	TCK	ispEN/PROG	na	TRST(OUTPUT)	VCC	GND
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama		Lanu meamata	Lanu mumu	Lanu uliuli
Polokalama uaea ituaiga pine Fautuaga Komiti Fa'atonu	Tuuina atu	Ulufale	Tuuina atu	Tuuina atu	Tuuina atu	Ulufale	Ulufale/Auga	Ulufale	Ulufale	Ou
	—	—	4.7 kΩ Toso i luga	4.7 kΩ Toso i lalo	(Faamatalaga 1)	—	—	(Faamatalaga 2)	—	(Leai (Leai
	Fa'afeso'ota'i uaea fa'apolokalame (luga) i le masini fa'atatau po'o pine fa'aulu (belo

JTAG Meafaigaluega Taulaga

ECP5™	TDI	TDO	TMS	TCK	Feso'ota'iga i le masini ispEN, PROGRAMN, INITN, FAIA ma/poʻo TRST faʻailoga (Faʻamatala ile Custom I/O faʻatulagaina ile ispVM System po'o le polokalame Diamond Programmer. E le o masini uma e maua nei pine)	Manaomia	Manaomia
LatticeECP3™/LatticeECP2M™ LatticeECP2™/LatticeECP™/ LatticeEC™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
LatticeXP2™/LatticeXP™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
LatticeSC™/LatticeSCM™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
MachXO2™/MachXO3™/MachXO3D™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
MachXO™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
ORCA®/FPSC	TDI	TDO	TMS	TCK		Manaomia	Manaomia
ispXPGA®/ispXPLD™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
ispMACH® 4000/ispMACH/ispLSI® 5000	TDI	TDO	TMS	TCK		Manaomia	Manaomia
MACH®4A	TDI	TDO	TMS	TCK		Manaomia	Manaomia
ispGDX2™	TDI	TDO	TMS	TCK		Manaomia	Manaomia
ispPAC®/ispClock™ (Fa'amatalaga 4)	TDI	TDO	TMS	TCK		Manaomia	Manaomia
Pule o le Platform™/ Pule o le Malosiaga/ Pule II/ Pule Fa'avae II (Faamatalaga 4)	TDI	TDO	TMS	TCK		Manaomia	Manaomia

Laulau 6.1. Fa'asinomaga Pin ma Uaea

HW-USBN-2B Lanu lele	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	FAIA	TRST(OUTPUT)	VCC	GND	I2C
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama	Lanu moaga	Lanu meamata	Lanu mumu	Lanu uliuli	Yelo
HW-USBN-2A Lanu lele	TDI	TDO	TMS	TCK	ispEN/PROG	INIT	TRST(AUAFUAGA)/FA'AI(FAAUTOGA)	VCC	GND
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama	Lanu moaga	Lanu meamata	Lanu mumu	Lanu uliuli
HW-DLN-3C Lanu lele	TDI	TDO	TMS	TCK	ispEN/PROG	na	TRST(OUTPUT)	VCC	GND
	Lanu moli	Lanu enaena	Lanu viole	Lanu pa'epa'e	Lanu samasama		Lanu meamata	Lanu mumu	Lanu uliuli
Polokalama uaea ituaiga pine Fautuaga Komiti Fa'atonu	Tuuina atu	Ulufale	Tuuina atu	Tuuina atu	Tuuina atu	Ulufale	Ulufale/Auga	Ulufale	Ulufale	O
	—	—	4.7 kΩ Toso i luga	4.7 kΩ Toso i lalo	(Faamatalaga 1)	—	—	(Faamatalaga 2)	—	(N (N
	Fa'afeso'ota'i uaea uaea fa'apolokalame (luga) i le masini fa'atatau po'o pine ulu (lalo

Pologa SPI Port Devices

ECP5	MOSI	MISO	—	CCLK	SN	Feso'ota'iga fa'apitoa ile masini PROGRAMN, INITN ma/po'o fa'ailoga FA'AI		Manaomia	Manaomia
LatticeECP3	MOSI	MISO	—	CCLK	SN			Manaomia	Manaomia
MachXO2/MachXO3/MachXO3D	SI	SO	—	CCLK	SN			Manaomia	Manaomia
CrossLink™ LIF-MD6000	MOSI	MISO	—	SPI_SCK	SPI_SS	Filifili. CDONE	CRESET_B	Manaomia	Manaomia
iCE40™/iCE40LM/iCE40 Ultra™/ iCE40 UltraLite™	SPI_SI	SPI_SO	—	SPI_SCK	SPI_SS_B	Filifili. CDONE	CRESET_B	Manaomia	Manaomia

I2C Port Devices

MachXO2/MachXO3/MachXO3D	—	—	—	—	Feso'ota'iga fa'apitoa ile masini PROGRAMN, INITN ma/po'o fa'ailoga FA'AI			Manaomia	Manaomia
Pule Sili II	—	—	—	—				Manaomia	Manaomia	SCL_M
L-ASC10	—	—	—	—	—	—	—	Manaomia	Manaomia
CrossLink LIF-MD6000	—	—	—	—	—	Filifili. CDONE	CRESET_B	Manaomia	Manaomia

Ulutala

1 x 10 feso'ota'iga (uaea eseese)	3	2	6	8	4	9 po o le 10	5 po o le 9	1	7
1 x 8 feso'ota'iga (silasila i le Ata 3.4)	3	2	6	8	4	—	5	1	7
2 x 5 feso'ota'iga (silasila i le Ata 3.5)	5	7	3	1	10	—	9	6	2, 4, po o le 8

Tagata fai polokalame

Fa'ata'ita'iga 300	5	7	3	1	10	—	9	6	2, 4, po o le 8
iCEprog™ iCEprogM1050	8	5	—	7	9	3	1	6	10

Fa'amatalaga: 

• Mo masini Lattice ISP tuai, e mana'omia se capacitor decoupling 0.01 μF ispEN/ENABLE o le laupapa fa'atatau.
• Mo HW-USBN-2A/2B, o lo'o tu'uina atu e le laupapa fa'atatau le mana - ICC masani = 10 mA. Mo masini e iai se pine VCCJ, e tatau ona feso'ota'i le VCCJ, fa'afeso'ota'i le VCCIO faletupe talafeagai ile VCC ole uaea. E mana'omia se capacitor decoupling 0.1 μF ile VCCJ po'o le VCCIO latalata ile masini. pepa e iloa ai pe i ai se pine VCCJ o le masini po'o le a le faletupe VCCIO e pulea le taulaga polokalame sini (atonu e le tutusa ma le sini 3. Tatala alavai faailoilo. E tatau i le laupapa sini ona i ai ~ 2.2 kΩ toso i luga tetee e fesootai i le tutusa va'alele e feso'ota'i i ai VCC uaea HW-USBN-2B i VCC.
• A fa'aogaina le PAC-Designer® software e fa'apolokalame ai masini ispPAC po'o ispClock, aua le fa'afeso'ota'i le TRST/DONE.
• Afai e fa'aoga se uaea e matua atu nai lo le HW-USBN-2B, fa'afeso'ota'i se sapalai i fafo +5 V i le va o le iCEprogM1050 pine 4 (VCC) ma le pine 2 (GND).
• Mo HW-USBN-2B, na'o VCC tau o le 3.3 V i le 2.5 V o lo'o lagolagoina mo le I2C.

Feso'ota'i le Uaea Polokalama

E tatau ona leai se malosi o le laupapa taula'i pe a fa'afeso'ota'i, motusia, pe toe fa'afeso'ota'i le uaea polokalame. Fa'afeso'ota'i i taimi uma le pine GND (uaea uliuli) a le uaea polokalame a'o le'i fa'afeso'ota'i isi JTAG pine. O le le mulimulita'i i nei faiga e mafai ona i'u ai i le fa'aleagaina o le masini e mafai ona fa'atonuina.

Polokalame Cable TRST Pin

E le fautuaina le faʻafesoʻotaʻi o le laupapa TRST pine i le uaea TRST pine. Ae, fa'afeso'ota'i le pine TRST laupapa ile Vcc. Afai o le laupapa TRST pine e fesoʻotaʻi i le uaea TRST pine, faʻatonu le ispVM/Diamond Programmer e tulia le pine TRST maualuga.

Le fa'atulagaina o le ispVM/Diamond Programmer e fa'aoso le pine TRST maualuga:

• Filifili le mea lisi o Filifiliga.
• Filifili Cable ma I/O Port Setup.
• Filifili le pusa siaki TRST/Reset Pin-Connected.
• Filifili le Seti High radio button.

Afai e le filifilia le filifiliga saʻo, o le TRST pine e faʻalaloina e le ispVM / Diamond Programmer. O lea la, e le aoga le filifili BSCAN ona ua loka le filifili i se tulaga RESET.

Polokalame Cable ispEN Pin

O pine nei e tatau ona fa'avaeina:

• BSCAN pine o masini 2000VE
• ENABLE pin of MACH4A3/5-128/64, MACH4A3/5-64/64 and MACH4A3/5-256/128 devices.

Ae ui i lea, e iai lau filifiliga e maua ai pine BSCAN ma ENABLE e fa'aoso e le pine ispEN mai le uaea. I lenei tulaga, ispVM/Diamond Programmer e tatau ona configured e tulia le ispEN pine maualalo e pei ona taua i lalo:
Ina ia fetuutuunai le ispVM/Diamond Programmer e ave le pine ispEN i lalo:

1. Filifili le mea lisi o Filifiliga.
2. Filifili Cable ma I/O Port Setup.
3. Filifili le pusa siaki ispEN/BSCAN Pin Connected.
4. Filifili le Set Low radio button.

O va'a uaea fa'apolokalame ta'itasi e lua tama'i feso'ota'iga e fesoasoani ia te oe e fa'atumauina lelei uaea lele. O le gaosiga o loʻo mulimuli mai ma le numera o vaega o se tasi lea e mafai ona maua ai fesoʻotaʻiga tutusa:

• 1 x 8 Feso'ota'i (mo fa'ata'ita'igaample, Samtec SSQ-108-02-TS)
• 2 x 5 Feso'ota'i (mo fa'ata'ita'igaample, Samtec SSQ-105-02-TD)

O le uaea lele lele po'o ulutala ua fa'amoemoe e fa'afeso'ota'i i ulutala va'ava'a 100-mil (o pine e va 0.100 inisi le va). Lattice fautuaina se ulutala ma le umi o le 0.243 inisi poʻo le 6.17 mm. Ae ui i lea, o ulutala o isi uumi e mafai ona tutusa lelei.

Fa'amatalaga Fa'atonu

Laulau 10.1. Polokalama Cable Feature Summary

Fa'aaliga	HW-USBN-2B	HW-USBN-2A	HW-USB-2A	HW-USB-1A	HW-DLN-3C	HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C	HW7265-DL2	HW7265-DL2A	PDS4102-DL2	PDS4102-DL2A
USB	X	X	X	X	—	—	—	—	—	—
PC-Fa'atasi	—	—	—	—	X	X	X	X	X	X
1.2 V Lagolago	X	X	X	—	—	—	—	—	—	—
1.8 V Lagolago	X	X	X	X	X	X	—	X	—	X
2.5-3.3 V Lagolago	X	X	X	X	X	X	X	X	X	X
5.0 V Lagolago	—	X	X	X	X	X	X	X	X	X
2 x 5 Fesoʻotaʻiga	—	X	X	X	X	X	X	X	—	—
1 x 8 Fesoʻotaʻiga		X	X	X	X	X	—	—	X	X
Flywire	X	X	X	X	X	X	—	—	—	—
Fauga e leai ni ta'ita'i	X	X	—	—	X	—	—	—	—	—
Avanoa mo oka	X	—	—	—	X	—	—	—	—	—

Laulau 10.2. Faʻasologa o Faʻamatalaga

Fa'amatalaga	Oka Numera Vaega	Saina RoHS Si'osi'omaga-Taimi Fa'aoga Fa'auoga (EFUP)
Uaea Polokalama (USB). O lo'o iai le 6' USB cable, flywire connectors, 8-tulaga (1 x 8) adapter ma le 10-position (2 x 5) adapter, leai se ta'ita'i, RoHS fau fau.	HW-USBN-2B
Uaea polokalame (na'o PC). O lo'o i ai mea fa'afeso'ota'i uafu fa'atusa, uaea 6', feso'ota'iga uaea lele, mea fa'aoga 8-tulaga (1 x 8) ma le 10-. tulaga (2 x 5) fetuutuunai, ta'ita'i-sa'oloto, RoHS fa'atulafonoina faufale.	HW-DLN-3C

Fa'aaliga: O laina fa'aopoopo o lo'o fa'amatalaina i totonu o lenei pepa mo na'o fa'amoemoega fa'aleaganu'u, o nei uaea e le'o toe gaosia. O uaea o lo'o avanoa nei mo le fa'atonuga e tutusa lelei ma mea e sui ai.

Fa'aopoopo A. Fa'afitauli o le Fa'apipi'iina o Aveta'avale USB

E taua tele lou fa'apipi'iina o aveta'avale a'o le'i fa'afeso'ota'i lau PC i le uaea USB. Afai e fesoʻotaʻi le uaea aʻo leʻi faʻapipiʻi avetaʻavale, o le a taumafai Windows e faʻapipiʻi ana lava taʻavale atonu e le aoga.
Afai na e taumafai e faʻafesoʻotaʻi le PC i le USB cable e aunoa ma le faʻapipiʻiina muamua o avetaavale talafeagai, pe faʻalavelave e fesoʻotaʻi ma le Lattice USB cable pe a uma ona faʻapipiʻi avetaavale, mulimuli i laasaga o loʻo i lalo:

1. Fa'amau le uaea USB Lattice. Filifili Amata> Seti> Pulea Pulea> Faiga.
2. I totonu o le System Properties dialog box, kiliki le Meafaigaluega tab ma le masini Pule faamau. I lalo ole Universal Serial Bus controllers, e tatau ona e va'ai Lattice USB ISP Programmer. Afai e te le vaʻai i lenei mea, vaʻai mo le Unknown Device ma le fuʻa samasama. Kiliki fa'alua i luga o le fa'ailoga le iloa o masini.
3. I le Unknown device Properties dialog box, kiliki Reinstall Driver.
4. Filifili Su'esu'e la'u komepiuta mo le polokalama aveta'avale.
   Su'e ile isptools\ispvmsystem directory mo le aveta'avale Lattice EzUSB.
   Su'e ile isptools\ispvmsystem\Drivers\FTDIUSBDriver directory mo le avetaavale FTDI FTUSB.
5. Mo fa'apipi'i Taimane, su'esu'e ile lscc/diamond/data/vmdata/drivers. Kiliki le Next.
6. Filifili Fa'apipi'i lenei polokalame Aveta'avale pea. O le faiga faʻafouina le avetaavale.
7. Kiliki Close ma fa'auma le fa'apipi'iina o le ta'avale USB.
8. I lalo o le Panele Pulea > Fa'atonu > Pule Fa'atonu > Universal Serial Bus Controllers e tatau ona aofia ai mea nei: Mo le Lattice EzUSB Aveta'avale: Lattice USB ISP Programmer masini fa'apipi'i.

Mo le FTDI FTUSB Aveta'avale: USB Serial Converter A ma le Lisi B masini fa'apipi'i

Afai o lo'o e feagai ma fa'afitauli pe mana'omia ni fa'amatalaga fa'aopoopo, fa'afeso'ota'i le Lattice Technical Support.

Lagolago Fa'atekinisi

Mo se fesoasoani, lafo mai se mataupu lagolago fa'apitoa ile www.latticesemi.com/techsupport.

Toe Iloilo Tala'aga

Toe Iloiloga 26.4, Me 2020

Vaega	Suiga Aotelega
Uaea Polokalama	Fa'afouina Lattice websaite sootaga i www.latticesemi.com/programmer.
Polokalama Polokalama

Toe Iloiloga 26.3, Oketopa 2019

Vaega	Suiga Aotelega
Fuafuaga o Fuafuaga a le Komiti Fa'atonu; Polokalama Flywire ma Fa'asinoga So'oga	Fa'amalamalama fa'atatau VCC e lagolagoina e le I2C fa'aoga. Fa'aopoopo fa'amatalaga ile Laulau 6.1.

Toe Iloiloga 26.2, Me 2019

Vaega	Suiga Aotelega
—	Fa'aopoopo vaega Fa'a'ese'esega.
Polokalama Flywire ma So'oga Fa'asinomaga	Fa'afouina Siata 6.1. Fa'asinomaga Pin ma Uaea. Faaopoopo le MachXO3D Fa'aopoopo CRESET_B ile Crosslink I2C. Fa'afou mea i lalo ole I2C Port Devices · Fa'aopoopoina le Pule Sili II. · Suia le faasologa o le ispPAC. Fa'afou mea i lalo ole I2C Port Devices. · Suia le Pule Pule II i le Pule Sili II ma fa'afouina le I2C: SDA tau. · Suia le ASC i le L-ASC10 Fa'afouina vaefaamatalaga 4 e aofia ai masini ispClock. Fa'ailoga tau fefa'ataua'iga.
Toe Iloilo Tala'aga	Fa'afou fa'asologa.
Faavaa tua	Fa'afou fa'atusa.
—	Suiga faatonu laiti

Toe Iloiloga 26.1, Me 2018

Vaega	Suiga Aotelega
O mea uma	Fa'asa'o fa'amaumauga i le vaega Slave SPI Port Devices o le Siata 6.1.

Toe Iloiloga 26.0, Aperila 2018

Vaega	Suiga Aotelega
O mea uma	Suia le numera o pepa mai le UG48 i le FPGA-UG-02024. Fa'afou pepa fa'ata'ita'iga.
Uaea Polokalama	Aveese fa'amatalaga fa'aletonu ma suia le feso'ota'iga i le www/latticesemi.com/software.
Polokalame Cable Pin Fa'auigaga	Fa'afou igoa Fa'apolokalame Cable Pin i le Laulau 3.1. Polokalame Cable Pin Fa'auigaga.
Polokalama Flywire ma So'oga Fa'asinomaga	Suia le Laulau 2. Flywire Conversion Reference ma le Laulau 3 Fautuaina Pin Feso'ota'iga ma se Laulau e tasi 6.1 Pin ma Uaea Fa'asinomaga.
Fa'amatalaga Fa'atonu	Si'itia Laulau 10.1. Polokalama Cable Feature Summary i lalo o Fa'amatalaga Fa'atonu.

Toe Iloiloga 25.0, Novema 2016

Vaega	Suiga Aotelega
Polokalama Flywire ma So'oga Fa'asinomaga	Fuafuaina Laulau 3, Feso'ota'iga Pin Fautuaina. Fa'aopoopoina le masini CrossLink.

Toe Iloiloga 24.9, Oketopa 2015

Vaega	Suiga Aotelega
Polokalama Flywire ma So'oga Fa'asinomaga	Fuafuaina Laulau 3, Feso'ota'iga Pin Fautuaina. Fa'aopoopo le koluma CRESET-B. Fa'aopoopo iCE40 UltraLite masini.
Fesoasoani Lagolago Fa'atekinisi	Fa'afou fa'amatalaga Fesoasoani Fesoasoani Fa'atekinisi.

Toe Iloiloga 24.8, Mati 2015

Vaega	Suiga Aotelega
Polokalame Cable Pin Fa'auigaga	Fa'amatalaga toe fa'afouga o le INIT i le Laulau 1, Fa'amatalaga Fa'amatalaga Fa'amatalaga Fa'atonu.

Toe Iloiloga 24.7, Ianuari 2015

Vaega	Suiga Aotelega
Polokalame Cable Pin Fa'auigaga	I le Laulau 1, Programming Cable Pin Definitions, ispEN/Enable/PROG ua suia i le ispEN/Enable/PROG/SN ma lona fa'amatalaga toe teuteu. Fa'afou Ata 2, Polokalame Cable In-System Programming Interface mo le PC (HW-USBN-2B).
Polokalame Cable ispEN Pin	I le Laulau 4, Polokalama Cable Feature Summary, HW-USBN-2B faʻailogaina e avanoa mo le faʻatonuga.
Fa'amatalaga Fa'atonu	HW-USBN-2A suia i le HW- USBN-2B.

Toe Iloiloga 24.6, Iulai 2014

Vaega	Suiga Aotelega
O mea uma	Suia le igoa o le pepa mai le ispDOWNLOAD Cables i Programming Cables User's Guide.
Polokalame Cable Pin Fa'auigaga	Fa'afou Laulau 3, Fautuaina Pin Feso'ota'iga. Fa'aopoopo ECP5, iCE40LM, iCE40 Ultra, ma aiga masini MachXO3.
Fuafuaga Fuafuaga a le Komiti Fa'atonu	Vaega fa'afouina. Fa'afou FAQ so'oga ile ispVM fa'atonutonu meafaigaluega ole TCK ta'amilosaga tiute ma/po'o taimi.
Fesoasoani Lagolago Fa'atekinisi	Fa'afou fa'amatalaga Fesoasoani Fesoasoani Fa'atekinisi.

Toe Iloiloga 24.5, Oketopa 2012

Vaega	Suiga Aotelega
Polokalama Flywire ma So'oga Fa'asinomaga	Fa'aopoopo iCE40 fa'aigoa fa'amau uafu pine i le laulau Fa'aliliuga Fa'aliliuga Flywire.
Polokalama Flywire ma So'oga Fa'asinomaga	Fa'aopoopo le iCE40 fa'amatalaga ile laulau Fautuaina Feso'ota'iga Uaea.

Toe Iloiloga 24.4, Fepuari 2012

Vaega	Suiga Aotelega
O mea uma	Fa'afou pepa fa'atasi ma le logo fou a le kamupani.

Toe Iloiloga 24.3, Novema 2011

Vaega	Suiga Aotelega
O mea uma	Fa'aliliuina pepa i le fa'asologa o ta'iala a le tagata fa'aoga.
Vaega	Fa'aopoopo Ata USB Uaea – HW-USBN-2A.
Polokalama Flywire ma So'oga Fa'asinomaga	Fa'afouina le laulau Feso'ota'iga Uaea Fautuaina mo masini MachXO2.
Fuafuaga Fuafuaga a le Komiti Fa'atonu	Vaega fa'afouina.
Fa'aopoopo A	Faaopoopo vaega.

Toe Iloiloga 24.2, Oketopa 2009

Vaega	Suiga Aotelega
O mea uma	Faʻaopoopo faʻamatalaga e fesoʻotaʻi ma faʻamatalaga faʻapitoa o fesoʻotaʻiga flywire.

Toe Iloiloga 24.1, Iulai 2009

Vaega	Suiga Aotelega
O mea uma	Fa'aopoopo le Vaega o Fa'atonu Fuafuaga a le Komiti Fa'atonu.
Polokalama Flywire ma So'oga Fa'asinomaga	Fa'aopoopo le ulutala vaega.

Toe Iloiloga Muamua

Vaega	Suiga Aotelega
—	Fa'asalalau Lattice muamua.

www.latticesemi.com

Pepa / Punaoa

LATTICE FPGA-UG-02042-26.4 Uaea Polokalama [pdf] Taiala mo Tagata Fa'aoga FPGA-UG-02042-26.4 Uaea Polokalame, FPGA-UG-02042-26.4, Uaea Polokalama, Uaea

Fa'asinomaga

• Tusi Taiala