LATTICE FPGA-UG-02042-26.4 Lisebelisoa tsa Lenaneo

Boithorollo

Lattice ha e fane ka tiisetso, boemeli, kapa tiisetso mabapi le ho nepahala ha tlhahisoleseding e teng tokomaneng ena kapa ho tšoaneleha ha lihlahisoa tsa eona bakeng sa morero ofe kapa ofe. Lintlha tsohle tse mona li fanoe JOALOKAHA LE ka liphoso tsohle, 'me likotsi tsohle tse amanang le tlhaiso-leseling e joalo li ho Moreki ka botlalo. Moreki a ke ke a itšetleha ka data efe kapa efe le litlhaloso tsa ts'ebetso kapa liparamente tse fanoeng mona. Lihlahisoa tse rekisoang ke Lattice li tlas'a liteko tse fokolang, 'me ke boikarabello ba Moreki ho tseba hore na lihlahisoa life kapa life li lokela ho sebetsa le ho etsa liteko le ho netefatsa hore li joalo. Ha ho lihlahisoa tsa Lattice tse lokelang ho sebelisoa hammoho le morero- kapa ts'ireletso-ea bohlokoa kapa ts'ebeliso efe kapa efe eo ho hloleha ha sehlahisoa sa Lattice ho ka bakang boemo moo kotsi ea motho, lefu, thepa e matla kapa tšenyo ea tikoloho e ka hlahang. Tlhahisoleseding e fanoeng tokomaneng ena ke ea mong'a Lattice Semiconductor, 'me Lattice e na le tokelo ea ho etsa liphetoho leha e le life boitsebisong bo tokomaneng ena kapa lihlahisoa leha e le life ka nako leha e le efe ntle le tsebiso.

Likaroloana

• Ts'ehetso bakeng sa lihlahisoa tsohle tse hlophisitsoeng tsa Lattice
  • 2.5 V to 3.3 V I2C programming (HW-USBN-2B)
  • 1.2 V ho 3.3 VJTAG le mananeo a SPI (HW-USBN-2B)
  • 1.2 V ho 5 VJTAG le SPI programming (lithapo tse ling kaofela)
  • E loketse bakeng sa prototyping ea moralo le ho lokisa liphoso
• Hokela ho li-interfaces tse ngata tsa PC
  • USB (v.1.0, v.2.0)
  • PC Parallel Port
• Lihokelo tsa mananeo tse fumanehang habonolo
  • Lihokelo tse fapaneng tsa flywire, 2 x 5 (.100”) kapa 1 x 8 (.100”)
  • 6 maoto (limithara tse 2) kapa ho feta tsa bolelele ba thapo ea lenaneo (PC ho ea DUT)
• Kaho e lumellanang le lead-free/RoHS

Lisebelisoa tsa mananeo

Lihlahisoa tsa Lattice Programming Cable ke khokahanyo ea hardware bakeng sa lenaneo la in-system la lisebelisoa tsohle tsa Lattice. Kamora hore o phethe moralo oa hau oa logic mme o thehe lenaneo file ka Lattice Diamond®/ispLEVER® Classic lisebelisoa tsa nts'etsopele, u ka sebelisa Diamond Programmer kapa software ea ispVM™ System ho hlophisa lisebelisoa botong ea hau. Software ea ispVM System/Diamond Programmer e iketsetsa litaelo tse nepahetseng tsa lenaneo, liaterese tsa mananeo le data ea mananeo e ipapisitseng le tlhaiso-leseling e bolokiloeng lenaneong. file le liparamente tseo u li behileng ho Diamond Programmer/ispVM System. Lits'oants'o tsa mananeo li hlahisoa ho tsoa ho USB kapa koung e ts'oanang ea PC ebe li tsamaisoa ka thapo ea lenaneo ho ea sesebelisoa. Ha ho na likarolo tse ling tse hlokahalang bakeng sa lenaneo.
Software ea Diamond Programmer/ispVM System e kenyellelitsoe le lihlahisoa tsohle tsa lisebelisoa tsa meralo ea Lattice mme e fumaneha bakeng sa ho khoasolla ho tsoa ho Lattice. web site at www.latticesemi.com/programmer.

Programming Cable Pin Litlhaloso

Mesebetsi e fanoeng ke lithapo tsa lenaneo li lumellana le mesebetsi e fumanehang ho lisebelisoa tse ka khonehang tsa Lattice. Kaha lisebelisoa tse ling li na le likarolo tse fapaneng tsa lenaneo, mesebetsi e khethehileng e fanoang ke thapo ea lenaneo e ka itšetleha ka sesebelisoa se khethiloeng. ispVM System/Diamond Programmer software e iketsetsa mesebetsi e nepahetseng ho latela sesebelisoa se khethiloeng. Sheba Lethathamo la 3.1 bakeng sa ho fetaview ea mesebetsi ea cable ea programming.
Lethathamo la 3.1. Programming Cable Pin Litlhaloso.

Programming Cable Pin	Lebitso	Mofuta oa Pin ea Cable ea Lenaneo	Tlhaloso
VCC	Lenaneo la Moqtage	Kenyeletso	Hokela ho sefofane sa VCCIO kapa VCCJ sa sesebelisoa se shebiloeng. ICC e tloaelehileng = 10 mA. Boto ea sepheo e fana ka phepelo ea VCC/referense bakeng sa thapo.
TDO/SO	Sephetho sa Lintlha tsa Teko	Kenyeletso	E sebelisoa ho fetisa data ka IEEE1149.1 (JTAG) maemo a lenaneo.
TDI/SI	Kenyeletso ya Boitsebiso	Sephetho	E sebelisoa ho fetola data ka mokhoa oa IEEE1149.1 oa lenaneo.
ISPEN/PROG	Thusa	Sephetho	Etsa hore sesebelisoa se hlophisehe. E boetse e sebetsa joalo ka SN/SSPI Chip Select bakeng sa mananeo a SPI ka HW-USBN-2B.
TRST	Hlakola Botjha	Sephetho	Ho ikhethela IEEE 1149.1 mochini oa ho qala bocha.
QETILE	QETILE	Kenyeletso	HO QETILE e bontša boemo ba tlhophiso
TMS	Mokhoa oa Teko Khetha Kenyo	Sephetho	E sebelisoa ho laola mochini oa mmuso oa IEEE1149.1.
GND	Fatše	Kenyeletso	Hokela ho sefofane sa fatše sa sesebelisoa se shebiloeng
TCK/SCLK	Kenyeletso ea Oache	Sephetho	E sebelisoa ho ts'oara mochini oa mmuso oa IEEE1149.1
MOEKETSI	Qala	Kenyeletso	E bontša hore sesebelisoa se se se loketse ho qala. INITN e fumaneha feela lisebelisoa tse ling.
I2C: SCL*	I2C SCL	Sephetho	E fana ka letšoao la I2C SCL
I2C: SDA*	I2C SDA	Sephetho	E fana ka letšoao la I2C SDA.
5 V OUT*	5 V Tsoa	Sephetho	E fana ka letšoao la 5 V bakeng sa iCEprogM1050 Programmer.

Hlokomela: E fumaneha feela thapong ea HW-USBN-2B.

Hlokomela: E hloka Diamond Programmer 3.1 kapa hamorao.

Setšoantšo sa 3.2. Lenaneo la Lenaneo la Cable In-System Programming Interface bakeng sa PC (HW-USB-1A kapa HW-USB-2A)*
Hlokomela: Lattice PAC-Designer® software ha e tšehetse ho etsa mananeo ka lithapo tsa USB. Ho hlophisa lisebelisoa tsa ispPAC ka likhoele tsena, sebelisa software ea Diamond Programmer/ispVM System.

Hlokomela: HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C le HW-DLN-3C ke lihlahisoa tse ts'oanang le ts'ebetso.

Setšoantšo sa 3.4. Programming Cable In-System Programming Interface bakeng sa PC (pDS4102-DL2 kapa pDS4102- DL2A)

Setšoantšo sa 3.5. Programming Cable In-System Programming Interface bakeng sa PC (HW7265-DL2 kapa HW7265-DL2A)*

Hlokomela: Bakeng sa merero ea litšupiso, sehokelo sa 2 x 10 ho HW7265-DL2 kapa HW7265-DL2A se lekana le Tyco 102387-1. Sena se tla hokahanya le li-header tse tloaelehileng tsa 100-mil 2 x 5, kapa 2 x 5 keyed, sehokelo sa banna se khutlisitsoeng joalo ka 3M N2510-5002RB.

Lenaneo la Software

Diamond Programmer le ispVM System bakeng sa lisebelisoa tsa Classic ke sesebelisoa se ratoang sa software bakeng sa lisebelisoa tsohle tsa Lattice le likhoele tsa ho jarolla. Mofuta oa morao-rao oa Lattice Diamond Programmer kapa software ea ispVM System e fumaneha bakeng sa ho khoasolla ho tsoa ho Lattice web saete ho www.latticesemi.com/programmer.

Litlhahiso tsa Moralo oa Boto e Lebeletsoeng

Sehanyetsi sa ho hula sa 4.7 kΩ se khothaletsoa khokahanong ea TCK ea boto e shebiloeng. Ts'ebetso ena ea ho theola e khothaletsoa ho qoba ho ts'oara ka mokhoa o sa lebelloang ha molaoli oa TAP o susumetsoang ke lioache tse potlakileng kapa joalo ka VCC r.amps holimo. Ts'ebetso ena e khothaletsoa bakeng sa malapa ohle a hlophisitsoeng a Lattice.
Lipontšo tsa I2C SCL le SDA li bulehile. Sehanyetsi sa ho hula sa 2.2 kΩ ho VCC se hlokahala botong e shebiloeng. Ke boleng ba VCC feela ba 3.3 V le 2.5 V bakeng sa I2C tse tšehetsoang ke lithapo tsa HW-USBN-2B.
Bakeng sa malapa a lisebelisoa tsa Lattice a nang le matla a fokolang, ho kgothaletswa ho eketsa sehanyetsi sa 500 Ω pakeng tsa VCCJ le GND nakong ea nako ea lenaneo ha thapo ea lenaneo la USB e hokahane le moralo o tlase haholo oa boto ea matla. Ho na le FAQ e buang ka sena ka botebo ho:
http://www.latticesemi.com/en/Support/AnswerDatabase/2/2/0/2205
Leano la JTAG Lebelo la boema-kepe ba mananeo le kanna la hloka ho laoloa ha o sebelisa likhoele tsa mananeo tse hoketsoeng ho li-PCB tsa bareki. Sena se bohlokoa haholo ha ho na le routing e telele ea PCB kapa ka lisebelisoa tse ngata tse tlanngoeng ka ketane. Software ea lenaneo la Lattice e ka fetola nako ea TCK e sebelisitsoeng ho JTAG kou ea mananeo ho tsoa ho thapo. Boemo bona ba boema-kepe bo nepahetseng bo tlase ba TCK bo ipapisitse le lintlha tse ngata, ho kenyelletsa lebelo la PC le mofuta oa thapo e sebelisitsoeng (port e bapileng, USB kapa USB2). Sesebelisoa sena sa software se fana ka khetho ea ho liehisa TCK bakeng sa debug kapa libaka tse lerata. Ho na le FAQ e buang ka sena ka botebo ho: http://www.latticesemi.com/en/Support/AnswerDatabase/9/7/974.aspx
Mohala oa ho khoasolla oa USB o ka sebelisoa ho hlophisa Power Manager kapa lihlahisoa tsa ispClock ka software ea lenaneo la Lattice. Ha u sebelisa thapo ea USB ka lisebelisoa tsa Power Manager I, (POWR604, POWR1208, POWR1208P1), u tlameha ho liehisa ho etsa TCK ka ntlha ea 2. FAQ e teng e tšohlang sena ka botebo ho:
http://www.latticesemi.com/en/Support/AnswerDatabase/3/0/306.aspx

Lenaneo la Flywire le Reference Connection

Sheba ho Lethathamo la 6.1 ho tsebahatsa, ho latela sesebelisoa sa Lattice, mokhoa oa ho hokela li-flywires tse fapaneng tsa lenaneo la Lattice. JTAG, tlhophiso ea SPI le I2C e tsejoa ka mokhoa o hlakileng. Lithapo tsa khale le li-hardware li kenyelelitsoe bakeng sa litšupiso. Ho feta moo, litlhophiso tse fapaneng tsa lihlooho li thathamisitsoe.
Lethathamo la 6.1. Reference Pin le Cable

HW-USBN-2B 'Mala oa Flywire	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	QETILE	TRST(OUTPUT)	VCC	GND	I2C
	namunu	Brown	Bopherese	Bosoeu	Bosehla	Boputsoa	Botala	Khubedu	Ntsho	Bosehla
HW-USBN-2A 'Mala oa Flywire	TDI	TDO	TMS	TCK	ispEN/PROG	MOEKETSI	TRST(OUTPUT)/E QETILE(INPUT)	VCC	GND
	namunu	Brown	Bopherese	Bosoeu	Bosehla	Boputsoa	Botala	Khubedu	Ntsho
HW-DLN-3C 'Mala oa Flywire	TDI	TDO	TMS	TCK	ispEN/PROG	na	TRST(OUTPUT)	VCC	GND
	namunu	Brown	Bopherese	Bosoeu	Bosehla		Botala	Khubedu	Ntsho
Keletso ea Boto ea Boipheliso ea Lenaneo la mofuta oa Cable	Sephetho	Kenyeletso	Sephetho	Sephetho	Sephetho	Kenyeletso	Kenyeletso/Sehlahisoa	Kenyeletso	Kenyeletso	Ou
	—	—	4.7 kΩ Hula-Holimo	4.7 kΩ Hula-Fatše	(Tlhaloso ea 1)	—	—	(Tlhaloso ea 2)	—	(Che (Che
	Hokela lithapo tsa thapo tsa lenaneo (ka holimo) ho sesebelisoa se lumellanang kapa lithapo tsa hlooho (belo

JTAG Lisebelisoa tsa Port

ECP5™	TDI	TDO	TMS	TCK	Lihokelo tsa boikhethelo ho sesebelisoa ispEN, PROGRAMN, INITN, DONE le/kapa TRST matšoao (Hlalosa ho litlhophiso tsa Custom I/O ho ispVM System kapa software ea Diamond Programmer. Ha se lisebelisoa tsohle tse nang le liphini tsena)	Ho hlokahala	Ho hlokahala
LatticeECP3™/LatticeECP2M™ LatticeECP2™/LatticeECP™/ LatticeEC™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
LatticeXP2™/LatticeXP™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
LatticeSC™/LatticeSCM™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
MachXO2™/MachXO3™/MachXO3D™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
MachXO™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
ORCA®/FPSC	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
ispXPGA®/ispXPLD™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
ispMACH® 4000/ispMACH/ispLSI® 5000	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
MACH®4A	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
ispGDX2™	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
ispPAC®/ispClock™ (Tlhokomeliso 4)	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala
Motsamaisi oa Platform™/Motsamaisi oa Matla/Motsamaisi oa Matla II/Motsamaisi oa Sethala II (Tlhaloso ea 4)	TDI	TDO	TMS	TCK		Ho hlokahala	Ho hlokahala

Lethathamo la 6.1. Reference Pin le Cable

HW-USBN-2B 'Mala oa Flywire	TDI/SI	TDO/SO	TMS	TCK/SCLK	ISPEN/PROG	QETILE	TRST(OUTPUT)	VCC	GND	I2C
	namunu	Brown	Bopherese	Bosoeu	Bosehla	Boputsoa	Botala	Khubedu	Ntsho	Yello
HW-USBN-2A 'Mala oa Flywire	TDI	TDO	TMS	TCK	ispEN/PROG	MOEKETSI	TRST(OUTPUT)/E QETILE(INPUT)	VCC	GND
	namunu	Brown	Bopherese	Bosoeu	Bosehla	Boputsoa	Botala	Khubedu	Ntsho
HW-DLN-3C 'Mala oa Flywire	TDI	TDO	TMS	TCK	ispEN/PROG	na	TRST(OUTPUT)	VCC	GND
	namunu	Brown	Bopherese	Bosoeu	Bosehla		Botala	Khubedu	Ntsho
Keletso ea Boto ea Boipheliso ea Lenaneo la mofuta oa Cable	Sephetho	Kenyeletso	Sephetho	Sephetho	Sephetho	Kenyeletso	Kenyeletso/Sehlahisoa	Kenyeletso	Kenyeletso	O
	—	—	4.7 kΩ Hula-Holimo	4.7 kΩ Hula-Fatše	(Tlhaloso ea 1)	—	—	(Tlhaloso ea 2)	—	(N (N
	Hokela lithapo tsa thapo tsa lenaneo (ka holimo) ho sesebelisoa se tsamaellanang kapa li-header pins (ka tlase

Lisebelisoa tsa Port SPI tsa Makhoba

ECP5	MOSI	MISO	—	EA-CCLK	SN	Likhokahano tsa boikhethelo ho sesebelisoa sa PROGRAMN, INITN le/kapa DONE matshwao		Ho hlokahala	Ho hlokahala
LatticeECP3	MOSI	MISO	—	EA-CCLK	SN			Ho hlokahala	Ho hlokahala
MachXO2/MachXO3/MachXO3D	SI	SO	—	EA-CCLK	SN			Ho hlokahala	Ho hlokahala
CrossLink™ LIF-MD6000	MOSI	MISO	—	SPI_SCK	SPI_SS	Khetha. CDONE	CRESET_B	Ho hlokahala	Ho hlokahala
iCE40™/iCE40LM/iCE40 Ultra™/ iCE40 UltraLite™	SPI_SI	SPI_SO	—	SPI_SCK	SPI_SS_B	Khetha. CDONE	CRESET_B	Ho hlokahala	Ho hlokahala

Lisebelisoa tsa boema-kepe tsa I2C

MachXO2/MachXO3/MachXO3D	—	—	—	—	Likhokahano tsa boikhethelo ho sesebelisoa sa PROGRAMN, INITN le/kapa DONE matshwao			Ho hlokahala	Ho hlokahala
Motsamaisi oa Sethala II	—	—	—	—				Ho hlokahala	Ho hlokahala	SCL_M
L-ASC10	—	—	—	—	—	—	—	Ho hlokahala	Ho hlokahala
CrossLink LIF-MD6000	—	—	—	—	—	Khetha. CDONE	CRESET_B	Ho hlokahala	Ho hlokahala

Lihlooho

1 x 10 conn (lithapo tse fapaneng)	3	2	6	8	4	9 kapa 10	5 kapa 9	1	7
1 x 8 conn (sheba Setšoantšo sa 3.4)	3	2	6	8	4	—	5	1	7
2 x 5 conn (sheba Setšoantšo sa 3.5)	5	7	3	1	10	—	9	6	2, 4, kapa 8

Baetsi ba mananeo

Setšoantšo sa 300	5	7	3	1	10	—	9	6	2, 4, kapa 8
iCEprog™ iCEprogM1050	8	5	—	7	9	3	1	6	10

Lintlha: 

• Bakeng sa lisebelisoa tsa khale tsa Lattice ISP, ho hlokahala 0.01 μF decoupling capacitor ho ispEN/ENABLE ea boto e shebiloeng.
• Bakeng sa HW-USBN-2A/2B, boto e shebiloeng e fana ka matla - Tloaelehileng ICC = 10 mA. Bakeng sa lisebelisoa tse nang le phini ea VCCJ, VCCJ e tlameha ho ba lisebelisoa tse hokahaneng, hokela VCCIO ea banka e loketseng ho VCC ea cable. Ho hlokahala 0.1 μF decoupling capacitor ho VCCJ kapa VCCIO haufi le sesebelisoa. Letlapa ho fumana hore na sesebelisoa se na le phini ea VCCJ kapa hore na banka ea VCCIO e laola sebaka sefe sa lenaneo (sena se ka 'na sa se ke sa tšoana le sepheo sa 3. Matšoao a bulehileng a ho hula. sefofane seo VCC e hokeletsoeng ho sona.
• Ha u sebelisa software ea PAC-Designer® ho hlophisa lisebelisoa tsa ispPAC kapa ispClock, u se ke ua hokela TRST/DONE.
• Haeba u sebelisa thapo ea khale ho feta HW-USBN-2B, hokela +5 V phepelo ea kantle lipakeng tsa iCEprogM1050 pin 4 (VCC) le pin 2 (GND).
• Bakeng sa HW-USBN-2B, ke boleng ba VCC feela ba 3.3 V thru 2.5 V bo tšehetsoeng bakeng sa I2C.

Ho hokela Cable ea Programming

Boto e shebiloeng e tlameha ho se be le matla ha e hokela, e khaoha, kapa e hokela hape mohala oa lenaneo. Kamehla hokela phini ea thapo ea GND (terata e ntšo) pele o hokela JTAG likhohlopo. Ho hloleha ho latela lits'ebetso tsena ho ka baka tšenyo ho sesebelisoa se hlophisehang.

Lenaneo la Cable TRST Pin

Ho hokela phini ea TRST le thapo ea TRST ha ho khothalletsoe. Ho e-na le hoo, hokela phini ea TRST ho Vcc. Haeba boto ea TRST pin e hokahane le thapo ea TRST pin, laela ispVM/Diamond Programmer ho khanna TRST pin holimo.

Ho lokisa ispVM/Diamond Programmer ho khanna pini ea TRST holimo:

• Kgetha aetheme ya menu ya Dikgetho.
• Khetha Cable le I/O Port Setup.
• Khetha lebokose la tlhahlobo la TRST/Reset Pin-Connected.
• Kgetha konopo ya Set High radio.

Haeba khetho e nepahetseng e sa khethoa, pinana ea TRST e tsamaisoa tlase ke ispVM/Diamond Programmer. Ka lebaka leo, ketane ea BSCAN ha e sebetse hobane ketane e notletsoe sebakeng sa RESET.

Lenaneo la Cable ispEN Pin

Lithako tse latelang li lokela ho hlophisoa:

• Pini ea BSCAN ea lisebelisoa tsa 2000VE
• ENABLE pin of MACH4A3/5-128/64, MACH4A3/5-64/64 and MACH4A3/5-256/128 devices.

Leha ho le joalo, u na le khetho ea ho ba le lithapo tsa BSCAN le ENABLE tse tsamaisoang ke phini ea ispEN ho tloha thapo. Tabeng ena, ispVM/Diamond Programmer e tlameha ho hlophisoa ho khanna pini ea ispEN tlase ka tsela e latelang:
Ho lokisa ispVM/Diamond Programmer ho khanna pin ea ispEN tlase:

1. Kgetha aetheme ya menu ya Dikgetho.
2. Khetha Cable le I/O Port Setup.
3. Khetha lebokose la ho hlahloba le hoketsoeng la ispEN/BSCAN Pin.
4. Khetha konopo ea Set Low radio.

E 'ngoe le e' ngoe ea li-cable ea mananeo e tsamaisana le likhokahano tse peli tse nyane tse u thusang ho boloka li-flywires li hlophisitsoe. Moetsi le karolo ea karolo e latelang ke mohloli o le mong oa lihokelo tse lekanang:

• 1 x 8 Sehokelo (bakeng sa mohlalaample, Samtec SSQ-108-02-TS)
• 2 x 5 Sehokelo (bakeng sa mohlalaample, Samtec SSQ-105-02-TD)

Flywire kapa lihlooho tsa thapo li reretsoe ho hokela lihloohong tse tloaelehileng tsa sebaka sa 100-mil (lithapo tse arohaneng ka 0.100 inch). Lattice e khothaletsa hlooho e bolelele ba lisenthimithara tse 0.243 kapa 6.17 mm. Leha ho le joalo, lihlooho tsa bolelele bo bong li ka sebetsa hantle ka ho lekana.

Ho Odara Boitsebiso

Lethathamo la 10.1. Programming Cable Feature Summary

Sebopeho	HW-USBN-2B	HW-USBN-2A	HW-USB-2A	HW-USB-1A	HW-DLN-3C	HW7265-DL3, HW7265-DL3A, HW-DL-3B, HW-DL-3C	HW7265-DL2	HW7265-DL2A	PDS4102-DL2	PDS4102-DL2A
USB	X	X	X	X	—	—	—	—	—	—
PC-Parallel	—	—	—	—	X	X	X	X	X	X
1.2 V Tšehetso	X	X	X	—	—	—	—	—	—	—
1.8 V Tšehetso	X	X	X	X	X	X	—	X	—	X
2.5-3.3 V Tšehetso	X	X	X	X	X	X	X	X	X	X
5.0 V Tšehetso	—	X	X	X	X	X	X	X	X	X
2 x 5 Sehokedi	—	X	X	X	X	X	X	X	—	—
1 x 8 Sehokedi		X	X	X	X	X	—	—	X	X
Flywire	X	X	X	X	X	X	—	—	—	—
Kaho e se nang loto	X	X	—	—	X	—	—	—	—	—
E fumaneha bakeng sa odara	X	—	—	—	X	—	—	—	—	—

Tafole ea 10.2. Ho laela tlhahisoleseling

Tlhaloso	Ho Odara Nomoro ea Karolo	Tikoloho ea China ea RoHS- Nako ea Tšebeliso e Setsoalle (EFUP)
Cable ea lenaneo (USB). E na le thapo ea USB ea 6′, likhokahanyo tsa flywire, adaptara ea boemo ba 8 (1 x 8) le adaptara ea maemo a 10 (2 x 5), e se nang loto, kaho e lumellanang le RoHS.	HW-USBN-2B
Lenaneo la cable (PC feela). E na le adaptara ea port e bapileng, thapo ea 6′, likhokahano tsa flywire, adaptara ea maemo a 8 (1 x 8) le 10- boemo (2 x 5) adaptara, ntle le lead, kaho e lumellanang le RoHS.	HW-DLN-3C

Hlokomela: Lithapo tsa tlatsetso li hlalositsoe tokomaneng ena molemong oa merero ea lefa feela, lithapo tsena ha li sa hlahisoa. Lithapo tse fumanehang hajoale bakeng sa odara ke lintho tse ncha tse lekanang ka botlalo.

Sehlomathiso A. Ho rarolla mathata ho Kenyelletsoa ha Mokhanni oa USB

Ho bohlokoa hore o kenye bakhanni pele o hokela PC ea hau ho thapo ea USB. Haeba thapo e hokahane pele e kenya bakhanni, Windows e tla leka ho kenya li-driver tsa eona tse kanna tsa se sebetse.
Haeba u lekile ho hokela PC thapo ea USB ntle le ho qala ka ho kenya li-driver tse loketseng, kapa u na le bothata ba ho buisana le thapo ea USB ea Lattice ka mor'a ho kenya li-driver, latela mehato e ka tlase:

1. Hokela thapo ea USB ea Lattice. Khetha Qala > Litlhophiso > Panel ea taolo > Sisteme.
2. Ka lebokoseng la puisano la Thepa ea Sistimi, tobetsa konopo ea Hardware le Selaoli sa Sesebelisoa. Tlas'a balaoli ba Universal Serial Bus, o lokela ho bona Lattice USB ISP Programmer. Haeba u sa bone sena, batla Sesebelisoa se sa Tsejoeng se nang le folakha e mosehla. Penya habeli aekhoneng ea Sesebelisoa sa Unknown.
3. Ka lebokoseng la puisano la Thepa e sa Tsejoeng, tobetsa Reinstall Driver.
4. Khetha Batla komporo ea ka bakeng sa software ea mokhanni.
   Batla bukeng ea isptools\ispvmsystem bakeng sa mokhanni oa Lattice EzUSB.
   Batla ho isptools\ispvmsystem\Drivers\FTDIUSBDriver directory bakeng sa mokhanni oa FTDI FTUSB.
5. Bakeng sa lisebelisoa tsa Diamond, sheba ho lscc/diamond/data/vmdata/drivers. Tobetsa E latelang.
6. Leha ho le joalo, khetha Kenya software ena ea Driver. Sistimi e nchafatsa mokhanni.
7. Tobetsa Koala 'me u qete ho kenya mokhanni oa USB.
8. Tlas'a Control Panel>System>Device Manager> Universal Serial Bus Controllers e lokela ho kenyelletsa tse latelang: Bakeng sa Lattice EzUSB Driver: Lattice USB ISP Programmer device e kentsoe.

Bakeng sa Mokhanni oa FTDI FTUSB: USB Serial Converter A le lisebelisoa tsa Converter B tse kentsoeng

Haeba u na le mathata kapa u hloka lintlha tse ling, ikopanye le Lattice Technical Support.

Tšehetso ea tekheniki

Ho fumana thuso, romella nyeoe ea tšehetso ea tekheniki ho www.latticesemi.com/techsupport.

Nalane ea Phetoho

Phetolelo ea 26.4, Motšeanong 2020

Karolo	Fetola Kakaretso
Lisebelisoa tsa mananeo	Lattice e ntlafalitsoeng websehokelo sa sebaka ho www.latticesemi.com/programmer.
Lenaneo la Software

Phetolelo ea 26.3, Mphalane 2019

Karolo	Fetola Kakaretso
Maikutlo a Boto ea Maiketsetso; Lenaneo la Flywire le Referense ea Khokahano	Litekanyetso tse hlakisitsoeng tsa VCC tseo I2C interface e li tšehetsang. Lintlha tse kenyellelitsoeng ho Lethathamo la 6.1.

Phetolelo ea 26.2, Motšeanong 2019

Karolo	Fetola Kakaretso
—	Karolo e ekelitsoeng ea Boithopollo.
Lenaneo la Flywire le Reference Connection	Lethathamo la 6.1 le ntlafalitsoeng. Reference Pin le Cable. E kentse MachXO3D E kentsoe CRESET_B ho Crosslink I2C. Lintho tse ntlafalitsoeng tlasa I2C Port Devices · Ekelitsoe Platform Manager II. · Tsamaiso e fetotsoeng ea ispPAC. Lintho tse ntlafalitsoeng tlasa I2C Port Devices. · Fetotse Power Manager II ho Platform Manager II le I2C e ntlafalitsoeng: boleng ba SDA. · Fetolela ASC ho L-ASC10 E ntlafalitsoe mongolo o botlaaseng ba leqephe ho kenyelletsa lisebelisoa tsa ispClock. Matshwao a fetotsweng.
Nalane ea Phetoho	Sebopeho se ntlafalitsoeng.
Sekoahelo se ka morao	Template e ntlafalitsoeng.
—	Liphetoho tse nyane tsa bohlophisi

Phetolelo ea 26.1, Motšeanong 2018

Karolo	Fetola Kakaretso
Tsohle	Likenyo tse lokisitsoeng karolong ea Slave SPI Port Devices ea Lethathamo la 6.1.

Phetolelo ea 26.0, Mmesa 2018

Karolo	Fetola Kakaretso
Tsohle	Nomoro ea tokomane e fetotsoeng ho tloha ho UG48 ho ea ho FPGA-UG-02024. Template ea tokomane e ntlafalitsoeng.
Lisebelisoa tsa mananeo	E tlositse tlhahisoleseling e sa hlokahaleng mme e fetotsoe sehokelo ho www/latticesemi.com/software.
Programming Cable Pin Litlhaloso	Mabitso a Ntlafatso ea Cable Pin ho Lethathamo la 3.1. Programming Cable Pin Litlhaloso.
Lenaneo la Flywire le Reference Connection	Fetiloe Tafole 2. Flywire Conversion Reference le Tafole 3 Likhokahano tsa Pin tse khothalelitsoeng ka Tafole e le 'ngoe ea 6.1 Pin le Reference Cable.
Ho Odara Boitsebiso	Lethathamo la 10.1. Programming Cable Feature Summary tlas'a Tlhahisoleseding ea ho Odara.

Phetolelo ea 25.0 Pulungoana 2016

Karolo	Fetola Kakaretso
Lenaneo la Flywire le Reference Connection	Lethathamo la 3 le ntlafalitsoeng, Lihokelo tsa Pin tse khothalelitsoeng. E kentse sesebelisoa sa CrossLink.

Phetolelo ea 24.9, Mphalane 2015

Karolo	Fetola Kakaretso
Lenaneo la Flywire le Reference Connection	Lethathamo la 3 le ntlafalitsoeng, Lihokelo tsa Pin tse khothalelitsoeng. E kentse kholumo ea CRESET-B. E kentse sesebelisoa sa iCE40 UltraLite.
Thuso ea Tšehetso ea Theknoloji	Lintlha tse nchafalitsoeng tsa Thuso ea Tšehetso ea Theknoloji.

Phetolelo ea la 24.8 Hlakubele 2015

Karolo	Fetola Kakaretso
Programming Cable Pin Litlhaloso	Tlhaloso e ntlafalitsoeng ea INIT ho Lethathamo la 1, Litlhaloso tsa Pin ea Cable ea Programming.

Phetolelo ea 24.7, Pherekhong 2015

Karolo	Fetola Kakaretso
Programming Cable Pin Litlhaloso	Ho Lethathamo la 1, Litlhaloso tsa Pin ea Cable ea Programming, ispEN/Enable/PROG e fetotsoe ho ispEN/Enable/PROG/SN le tlhaloso ea eona e ntlafalitsoe. Setšoantšo se ntlafalitsoeng sa 2, Cable ea Programming In-System Programming Interface bakeng sa PC (HW-USBN-2B).
Lenaneo la Cable ispEN Pin	Ho Lethathamo la 4, Kakaretso ea Sebopeho sa Cable Cable, HW-USBN-2B e tšoailoe hore e teng bakeng sa odara.
Ho Odara Boitsebiso	HW-USBN-2A e fetotsoe ho HW- USBN-2B.

Phetolelo ea 24.6, Phupu 2014

Karolo	Fetola Kakaretso
Tsohle	E fetotsoe sehlooho sa tokomane ho tloha ho ispDOWNLOAD Lithapo ho ea ho Tataiso ea Basebelisi ba Lithapo tsa Lenaneo.
Programming Cable Pin Litlhaloso	Lethathamo la 3 le ntlafalitsoeng, likhokahano tsa Pin tse khothalelitsoeng. E kentse ECP5, iCE40LM, iCE40 Ultra, le malapa a lisebelisoa tsa MachXO3.
Litlhahiso tsa Moralo oa Boto e Lebeletsoeng	Karolo e ntlafalitsoeng. Sehokelo sa FAQ se ntlafalitsoeng mabapi le taolo ea sesebelisoa sa ispVM sa potoloho ea mosebetsi oa TCK le/kapa khafetsa.
Thuso ea Tšehetso ea Theknoloji	Lintlha tse nchafalitsoeng tsa Thuso ea Tšehetso ea Theknoloji.

Phetolelo ea 24.5, Mphalane 2012

Karolo	Fetola Kakaretso
Lenaneo la Flywire le Reference Connection	E kentse mabitso a li-port configuration iCE40 tafoleng ea Flywire Conversion Reference.
Lenaneo la Flywire le Reference Connection	E kentse leseli la iCE40 tafoleng ea Khokahano ea Cable e Recommendedng.

Phetolelo ea 24.4, Hlakola 2012

Karolo	Fetola Kakaretso
Tsohle	Tokomane e ntlafalitsoeng e nang le logo e ncha ea khoebo.

Phetolelo ea 24.3 Pulungoana 2011

Karolo	Fetola Kakaretso
Tsohle	Tokomane e fetiselitsoe ho sebopeho sa tataiso ea mosebelisi.
Likaroloana	Setšoantšo se ekelitsoeng Cable ea USB - HW-USBN-2A.
Lenaneo la Flywire le Reference Connection	Tafole e ntlafalitsoeng ea Khokahano ea Cable e khothalelitsoeng bakeng sa lisebelisoa tsa MachXO2.
Litlhahiso tsa Moralo oa Boto e Lebeletsoeng	Karolo e ntlafalitsoeng.
Sehlomathiso A	Karolo e ekelitsoeng.

Phetolelo ea 24.2, Mphalane 2009

Karolo	Fetola Kakaretso
Tsohle	Lintlha tse ling tse amanang le lintlha tsa 'mele tsa likhokahano tsa flywire.

Phetolelo ea 24.1, Phupu 2009

Karolo	Fetola Kakaretso
Tsohle	Karolo ea mongolo e Ekelitsoeng ea Litlhaloso tsa Boto ea Maikutlo.
Lenaneo la Flywire le Reference Connection	E kentse sehlooho sa karolo.

Liphetoho tse Fetileng

Karolo	Fetola Kakaretso
—	Litokollo tse fetileng tsa Lattice.

www.latticesemi.com

Litokomane / Lisebelisoa

LATTICE FPGA-UG-02042-26.4 Lisebelisoa tsa Lenaneo [pdf] Bukana ea Mosebelisi FPGA-UG-02042-26.4 Cables Programming, FPGA-UG-02042-26.4, Lisebelisoa tsa Mananeo, Lithapo

Litšupiso

• Bukana ea Mosebelisi