Bukana ea Mosebelisi
BPCWL03

Sehlopha sa Khomphutha sa BPCWL03

Hlokomela

Lits'oants'o tse bukeng ena ea mosebelisi ke tsa litšupiso feela. Litlhaloso tsa sebele tsa sehlahisoa li ka fapana ho ea ka libaka. Lintlha tse bukeng ea mosebelisi li ka fetoha ntle le tsebiso.
MOHAPI KAPA MOHOETSI A KE KE A IKARABELLA LIPHOSO KAPA LITLOHELO TSE FUMANENG BUKANA ENA, 'me A KE KE A IKARATOA KA LITšenyo life kapa life, tse ka hlahisoang ke HO SEBELISA KAPA SEBEDISO ENA.
Lintlha tse bukeng ena ea mosebelisi li sirelelitsoe ke melao ea litokelo. Ha ho karolo ea bukana ena e lokelang ho kopitsoa kapa ho etsoa hape ka mokhoa ofe kapa ofe ntle le tumello e ngotsoeng pele ho beng ba litokelo tsa molao. Mabitso a sehlahisoa a boletsoeng mona e kanna ea ba matšoao a khoebo le/kapa mats'oao a ngolisitsoeng a beng ba ona/lik'hamphani ka ho fapana. Software e hlalositsoeng bukeng ena e fanoa tlas'a tumellano ea laesense. Software e ka sebelisoa kapa ea kopitsoa feela ho latela lipehelo tsa tumellano.
Sehlahisoa sena se kenyelletsa theknoloji ea ts'ireletso ea litokelo tse sirelelitsoeng ke litokelo tsa molao tsa US le litokelo tse ling tsa thepa ea mahlale.
Reverse engineering kapa disassembly e thibetsoe. Se ke oa lahlela sesebelisoa sena sa elektroniki ka har'a lithōle ha u se lahla. Ho fokotsa tšilafalo le ho netefatsa ts'ireletso e matlahali ea tikoloho ea lefats'e, ka kopo recycle.
Ho fumana lintlha tse ling mabapi le melaoana ea Litšila tse tsoang ho Thepa ea Motlakase le Elektronike (WEEE), etela http://ec.europa.eu/environment/waste/weee/index_en.htm

Selelekela

1.1 Lintlha tsa melaoana

• Ho lumellana ha CE
  Sesebelisoa sena se thathamisitsoe e le lisebelisoa tsa tlhaiso-leseling ea tekheniki (ITE) sehlopheng sa A 'me se reretsoe ho sebelisoa khoebong, lipalangoang, barekisi, sechaba, le automation…field.
• Melao ea FCC
  Sesebelisoa sena se lumellana le Karolo ea 15 ea Melao ea FCC. Ts'ebetso e ipapisitse le maemo a mabeli a latelang: (1) sesebelisoa sena se kanna sa se ke sa baka tšitiso e kotsi, 'me (2) sesebelisoa sena se tlameha ho amohela tšitiso efe kapa efe e amohetsoeng, ho kenyelletsa le tšitiso e ka bakang ts'ebetso e sa batleheng.

TLHOKOMELISO: Liphetoho life kapa life tse sa amoheloeng ka kotloloho ke tiisetso ea sesebelisoa sena li ka hlakola matla a mosebelisi a ho sebelisa sesebelisoa.

1.2 Litaelo tsa polokeho
Mehato e latelang ea ts'ireletso e tla eketsa bophelo ba Box-PC.
Latela Litlhokomeliso le litaelo tsohle.

Se ke oa beha sesebelisoa sena ka tlas'a meroalo e boima kapa sebakeng se sa tsitsang.
Se ke oa sebelisa kapa ua pepesa sesebelisoa sena haufi le libaka tsa makenete kaha tšitiso ea makenete e ka ama ts'ebetso ea sesebelisoa.
Se ke oa beha sesebelisoa sena maemong a holimo a letsatsi le tobileng, mongobo o phahameng kapa maemo a mongobo.
Se ke oa thiba masoba a moea sesebelisoa sena kapa ua sitisa phallo ea moea ka tsela efe kapa efe.
Se ke oa pepesa kapa oa sebelisa haufi le mokelikeli, pula, kapa mongobo.
Se ke oa sebelisa modem nakong ea lifefo tsa motlakase. Yuniti e ka sebetsoa ka mocheso o tloaelehileng oa max.
60°C (140°F). Se ke oa e beha mochesong o ka tlase ho -20°C (-4°F) kapa ka holimo ho 60°C (140°F).
E loketse bakeng sa lisebelisoa tsa indasteri: fektheri, kamore ea enjene ... joalo-joalo Ho ama Box-PC e sebetsang ka mocheso oa -20 ° C (-4 ° F) le 60 ° C (140 ° F) e tlameha ho qojoa.
Ela hloko mocheso o phahameng oa holim'a metsi!
Ka kopo u se ke ua ama sete ka ho toba ho fihlela sete e kokobela.

TLHOKOMELISO: Ho fetola betri ka tsela e fosahetseng ho ka senya komporo ena. Kenya sebaka feela ka se tšoanang kapa se lekanang joalo ka ha se khothalelitsoe ke Shuttle. Lahla libeteri tse sebelisitsoeng ho latela litaelo tsa moetsi.

1.3 Lintlha tsa bukana ena
TLHOKOMELO! Lintlha tsa bohlokoa li tlameha ho lateloa bakeng sa ts'ebetso e bolokehileng.
HLOKOMELA: Boitsebiso bakeng sa maemo a khethehileng.

1.4 Ho lokolla nalane

Phetolelo	Tlaleho ea ntlafatso	Letsatsi
1.0	Ea pele e lokollotsoe	1.2021

Ho tseba lintho tsa motheo

2.1 Tlhaloso ea sehlahisoa
Bukana ena ea Mosebelisi e fana ka litaelo le lipapiso mabapi le mokhoa oa ho sebelisa Lebokose-PC ena. Ho khothalletsoa ho bala bukana ena ka hloko pele u sebelisa Lebokose-PC ena.
・ Sebopeho sa 'mele
Boemo : 245(W) x 169(D) x 57(H) mm
Boima ba 'mele: NW. 2.85 KG / GW. 3 KG (ho ipapisitse le sehlahisoa se romelloang hantle)
·CPU
Ts'ehetsa Intel® 8th Generation Core™ i3 / i5 / i7, Celeron® CPU
・ Khopotso
Ts'ehetso ea DDR4 habeli kanale 2400 MHz, SO-DIMM (RAM socket *2) , Max ho fihla ho 64G
・ Polokelo
1x PCIe kapa SATA I/F (ho ikhethela)

・ I/O koung
4 x USB 3.0
1 x HDMI 1.4
2 x li-jacks tsa molumo (Mic-in & Line-out)
1 x COM (RS232 feela)
1 x RJ45 LAN
1 x RJ45 2nd LAN (boikhethelo)
1 x DC-kena

Adapter ea AC: 90 watts, 3 pin

TLHOKOMELO! MOHLALA O REETSE HO SEBELISA LE MOHOO OA DC:
(19Vdc / 4.74A) LI-ADApter. Watt ea adaptara e lokela ho latela maemo a kamehla kapa e bue ka lintlha tsa leibole ea lintlha.

2.2 Sehlahisoa se felileview
HLOKOMELA: 'Mala oa sehlahisoa, boema-kepe ba I/O, sebaka sa sesupo, le litlhaloso li tla ipapisa le sehlahisoa se romelloang.

• Front Panel: Likou tsa boikhethelo tsa I/O lia fumaneha ho latela lintlha tsa sehlahisoa se romelloang.

Boikhethelo Boema-kepe ba I/O	Likarolo tse Nkiloeng		Litlhaloso / Meeli
HDMI 1.4 / 2.0	1		Khetha e 'ngoe ea liboto tse 'nè tsa boikhethelo. Max. qeto: 1. HDMI 1.4: 4k/30Hz 2. HDMI 2.0: 4k/60Hz 3. DisplayPort: 4k/60Hz 4. DVI-I/D-Sub: 1920×1080
DisplayPort 1.2 (DP)	1
D-Sub (VGA)	1
DVI-I (Sehokelo se le Mong)	1
USB 2.0	1		Boholo: 2 x Quad USB 2.0 board
COM4	1		RS232 feela
COM2, COM3	2		RS232 / RS422 / RS485 Phepelo ea matla: Ring in/5V

• Panel e ka morao: Sheba papiso e latelang ho tseba likarolo tse ka lehlakoreng lena la Box-PC. Likarolo le litlhophiso li fapana ho ea ka mohlala.

1. Li-headphone/ Jack-line-out Jack
2. Koko ea maekerofounu
3. Boema-kepe ba LAN (e ts'ehetsa ho tsoha ho LAN) (ka boikhethelo)
4. LAN port (e tšehetsa ho tsoha ho LAN)
5. Li-port tsa USB 3.0
6. Boema-kepe ba HDMI
7. Boema-kepe ba COM (RS232 feela)
8. Jack ea motlakase (DC-IN)
9. Konopo ea matla
10. Sehokelo bakeng sa manakana a WLAN Dipole (ho ikhethela)

Ho kenya Hardware

3.1 Qala ho Instola
TLHOKOMELO! Bakeng sa mabaka a polokeho, ka kopo netefatsa hore thapo ea motlakase e khaotsoe pele u bula nyeoe.

1. Hlakola li-screws tse leshome tsa sekoahelo sa chassis 'me u se tlose.

3.2 Ho Kenya Mojule oa Memori
TLHOKOMELO! Letlapa lena la bo-mme le ts'ehetsa li-module tsa memori tsa 1.2 V DDR4 SO-DIMM feela.

1. Fumana li-slots tsa SO-DIMM leboteng la bo-mme.
2. Lokisetsa notch ea mojule oa memori le e 'ngoe ea libaka tsa memori tse amehang.
   
3. Ka bonolo kenya mojule ka har'a slot ka lehlakoreng la 45-degree.
4. Ka hloko sutumetsa mojuleng oa memori ho fihlela o kena mochining oa ho notlela.
   
5. Pheta mehato e ka holimo ho kenya mojule oa memori o eketsehileng, haeba ho hlokahala.

3.3 M.2 Ho kenya Sesebelisoa

1. Fumana li-slots tsa linotlolo tsa M.2 letlapeng la bo-mme, 'me u lokolle screw pele.
   • Sekotjana sa senotlolo sa M.2 2280 M
   
2. Kenya sesebelisoa sa M.2 ka har'a slot ea M.2 'me u se sireletse ka screw.
   
3. Ka kopo fetola 'me u khomarele sekoahelo sa chassis ka li-screw tse leshome.

3.4 Ho kenya tšebetsong sistimi
Latela mehato (1-3) e ka tlase ho hokela adaptara ea AC ho jeko ea motlakase (DC-IN). .Tobetsa konopo ea matla (4) ho bulela sistimi.
HLOKOMELA: Tobetsa 'me u tšoare konopo ea matla bakeng sa metsotsoana e 5 ho qobella ho tima.

TLHOKOMELISO: Se ke oa sebelisa lithapo tsa katoloso tse tlase kaha sena se ka baka tšenyo ho Box-PC ea hau. Box-PC e tla le adaptara ea eona ea AC. Se ke oa sebelisa adaptara e fapaneng ho matlafatsa Box-PC le lisebelisoa tse ling tsa motlakase.
HLOKOMELA: Adapter ea motlakase e ka futhumala ho isa ho e chesang ha e sebelisoa. Etsa bonnete ba hore ha u koahele adaptara ebe u e boloka hole le 'mele oa hau.

3.5 Ho kenya li-antenna tsa WLAN (ho ikhethela)

1. Ntša li-antenna tse peli ka lebokoseng la lisebelisoa.
2. Khutlela li-antenna holim'a lihokelo tse nepahetseng karolong e ka morao. Etsa bonnete ba hore li-antenna li hokahantsoe ka mokhoa o otlolohileng kapa o tšekaletseng ho fihlela kamohelo e ntle ka ho fetisisa e ka khonehang.
   

TLHOKOMELISO: Etsa bonnete ba hore li-antenna tse peli li hokahane ka tsela e nepahetseng.
3.6 VESA e e beha leboteng (ka boikhethelo)
Mekhatlo e tloaelehileng ea VESA e bonts'a moo thepa ea letsoho / lebota e fumanehang ka thoko e ka hokelloa.

HLOKOMELA: Box-PC e ka beoa leboteng ho sebelisoa VESA e lumellanang 75 mm x 75 mm lebota / bracket ea letsoho. Boima bo boholo ba mojaro ke lik'hilograma tse 10 le ho hlongoa ho loketseng ka bophahamo ba ≤ 2 m feela. Botenya ba tšepe ba thaba ea VESA bo tlameha ho ba pakeng tsa 1.6 le 2.0 mm.

3.7 Ho roala litsebe leboteng (ho ikhethela)
Latela mehato ea 1-2 ho kenya mochine oa tsebe.

3.8 Ho Sebelisa Seporo sa Din (boikhethelo)
Latela mehato ea 1-5 ho khomarela Box-PC seporong sa DIN.

Ho theha BIOS

4.1 Mabapi le ho seta BIOS
BIOS ea kamehla (Basic Input/Output System) e se e hlophisitsoe hantle ebile e ntlafalitsoe, hangata ha ho hlokahale ho sebelisa sesebelisoa sena.

4.1.1 Ho Sebelisa BIOS Setup Neng?
U ka 'na ua hloka ho tsamaisa BIOS Setup ha:

• Molaetsa oa phoso o hlaha skrineng nakong ea ha sistimi e qala mme o kopuoa ho tsamaisa SETUP.
• U batla ho fetola li-setting tsa kamehla bakeng sa likarolo tse ikhethileng.
• U batla ho kenya li-setting tsa kamehla tsa BIOS.

TLHOKOMELO! Re khothaletsa ka matla hore u fetole litlhophiso tsa BIOS feela ka thuso ea basebetsi ba koetlisitsoeng ba tšebeletso.
4.1.2 Mokhoa oa ho tsamaisa BIOS Setup?
Ho tsamaisa BIOS Setup Utility, bulela Box-PC ebe o tobetsa konopo ea [Del] kapa [F2] nakong ea ts'ebetso ea POST.
Haeba molaetsa o nyamela pele o araba mme o ntse o lakatsa ho kenya Setup, o ka qala sistimi botjha ka ho e TIMA le ho ON kapa ka nako e le nngwe o tobetse dikonopo tsa [Ctrl]+[Alt]+[Del] ho qala bocha. Ts'ebetso ea ho seta feela e ka kopuoa ka ho tobetsa konopo ea [Del] kapa [F2] nakong ea POST e fanang ka mokhoa oa ho fetola maemo le tlhophiso eo mosebelisi a e ratang, 'me litekanyetso tse fetotsoeng li tla boloka ho NVRAM' me li tla qala ho sebetsa kamora sistimi. qala bocha. Tobetsa konopo ea [F7] bakeng sa Boot Menu.

・ Ha tšehetso ea OS e le Windows 10:

1. Tobetsa ho Qala menu ebe o kgetha Di-setting.
2. Kgetha Apdeite le Tshireletso.
3. Tobetsa Recovery
4. Tlas'a Advanced qala, tobetsa Restart hona joale.
   Sistimi e tla qala hape ebe e bonts'a Windows 10 boot menu.
5. Khetha Ho rarolla mathata.
6. Khetha Mekhoa e tsoetseng pele.
7. Khetha Litlhophiso tsa Firmware tsa UEFI.
8. Tobetsa Restart ho qala sistimi ebe o kenya UEFI (BIOS).

Litokomane / Lisebelisoa

Shuttle BPCWL03 Sehlopha sa Khomphutha [pdf] Bukana ea Mosebelisi Sehlopha sa Khomphutha sa BPCWL03, BPCWL03, Sehlopha sa Khomphutha

Litšupiso

• Bukana ea Mosebelisi