Level Inoratidza
Mutongi LFC128-2
MUTUNGAMIRIRI WEMUSHANDISI WECHINHU CHEKURATIDZA MUTUNGAMIRI LFC128-2
LFC128-2-MN-EN-01 JUN-2020

LFC128-2 Yepamusoro Chiratidziro Chiratidziro

Gwaro iri rinoshandiswa kune zvinotevera zvigadzirwa

SKU	LFC128-2	HW Ver.	1.0	FW Ver.	1.1
Item Code	LFC128-2	Level Inoratidza Controller, 4AI/DI, 4DI, 4xRelay, 1xPulse Output, 2 x RS485/ModbusRTU-Kukurukurirana Kwevaranda

Mabasa Kuchinja Log

HW Ver.	FW Ver.	Release Date	Mabasa Change
1.0	1.1	JUN-2020

Nhanganyaya

LFC128-2 ndeye yepamusoro nhanho yekuratidzira controller. Chigadzirwa chinosanganisa Modbus RTU interface kubatsira PLC / SCADA / BMS uye chero IoT chiteshi inogona kubatana kuti itarise. LFC128-2 ine dhizaini yakapusa asi ine simba ine 4 AI / DI, 4 DI, 4 Relays, 1 Pulse pulse kubuda, 2 RS485 Muranda ModbusRTU ichivabvumira kuti vabatane nemidziyo yakawanda zviri nyore. Iine tekinoroji yepamusoro iyo inopa kugadzikana kwepamusoro uye kuvimbika, mabasa mazhinji, kuisirwa nyore ne touch screen uye hushamwari interface inobatsira kuona yekutarisa nhanho.

Tsanangudzo

Digital Inputs	04 x Ports, opto-coupler, 4.7 kohms input resisstance, 5000V rms isolation, Logic 0 (0-1VDC), Logic 1 (5-24VDC), Mabasa: logic status 0/1 kana Pulse counting (32 bit counter ine max 4kHz pulse)
Analog Inputs	04 x Ports, sarudza pakati pe0-10VDC yekuisa kana 0-20mA yekuisa, 12 bit Resolution, inogona kugadzirwa seDigital kupinza neDIP switch (max 10VDC kupinza) Iyo AI1 chiteshi ndeye 0-10 VDC / 4-20 mA level sensor yekubatanidza port.
Relay Output	04 x Ports, electro-mechanical Relays, SPDT, kuonana chiyero 24VDC/2A kana 250VAC/5A, zviratidzo zve LED
Pulse Output	01 x Ports, open-collector, opto-isolation, max 10mA uye 80VDC, On/off control, Pulser (max 2.5Khz, max 65535 Pulses) kana PWM (max 2.5Khz)
Kukurukurirana	02 x ModbusRTU-Muranda, RS485, kumhanya 9600 kana 19200, LED chiratidzo
Reset bhatani	Yekugadzirisa zvakare 02 x RS485 Slave port kune default setting (9600, Hapana parity, 8 bit)
Screen type	Bata skrini
Magetsi	9..36VDC
Kushandiswa	200mA @ 24VDC kupa
Mounting type	Panel gomo
Terminal Block	pitch 5.0mm, chiyero 300VAC, saizi yewaya 12-24AWG
Kushanda tembiricha / hunyoro	0..60 degC / 95%RH isiri-condensing
Dimension	H93xW138xD45
Net uremu	390 magiramu

Product Pictures

Operation Principle

5.1 Modbus kutaurirana

02 x RS485/ModbusRTU-Muranda
Protocol: Modbus RTU
Kero: 1 - 247, 0 ndiyo kero yeBroadcast
Baud rate: 9600 , 19200
Parity: hapana, zvisinganzwisisike, kunyange

• Status chiratidzo LED:
• Led on: modbus kutaurirana OK
• Led blinking: yakagashira data asi modbus kutaurirana kwakashata, nekuda kwekusarongeka kweModbus: kero, baudrate
• Yakabviswa: LFC128-2 haina kuwana data, tarisa kubatana

Memmap registers
VERENGA inoshandisa murairo 03, NYORA inoshandisa murairo 16
Default configuration:

• Kero: 1
• Baudrate muranda 1: 9600
• Parity muranda 1: hapana
• Baudrate muranda 2: 9600
• Parity muranda 2: hapana

Modbus Kunyoresa	Hex adr	# dzemarejista	Tsanangudzo	Range	Default	Format	Property	Comment
0	0	2	mudziyo ruzivo		LFC1	tambo	Verenga
8	8	1	DI1       DI2: chimiro chedhijitari	0-1		uint8	Verenga	H_byte: DI1 L_byte: DI2
9	9	1	DI3       DI4: chimiro chedhijitari	0-1		uint8	Verenga	H_byte: DI3 L_byte: DI4
10	A	1	AI1      AI2: chimiro chedhijitari	0-1		uint8	Verenga	H_byte: AI1 L_byte: AI2
11	B	1	AI3      AI4: chimiro chedhijitari	0-1		uint8	Verenga	H_byte: AI3 L_byte: AI4
12	C	1	AI1: kukosha kweanalog			uint16	Verenga
13	D	1	AI2: kukosha kweanalog			uint16	Verenga
14	E	1	AI3: kukosha kweanalog			uint16	Verenga
15	F	1	AI4: kukosha kweanalog			uint16	Verenga
16	10	2	AI1: yakayerwa kukosha			float	Verenga
18	12	2	AI2: yakayerwa kukosha			float	Verenga
20	14	2	AI3: yakayerwa kukosha			float	Verenga
22	16	2	AI4: yakayerwa kukosha			float	Verenga
24	18	1	rerai 1	0-1		uint16	Verenga
25	19	1	rerai 2	0-1		uint16	Verenga
26	1A	1	rerai 3	0-1		uint16	Verenga
27	1B	1	rerai 4	0-1		uint16	Verenga
28	1C	1	vhura muunganidzi ctrl		0-3	uint16	Verenga/Nyora	0: kubva pa1: pa2: pwm, puruzira zvinoenderera 3: kupomba, kana nhamba yekupuruzira yakakwana, ctrl = 0
30	1E	2	counter DI1			uint32	Verenga/Nyora	counter inonyorwa, inodzimika
32	20	2	counter DI2			uint32	Verenga/Nyora	counter inonyorwa, inodzimika
34	22	2	counter DI3			uint32	Verenga/Nyora	counter inonyorwa, inodzimika
36	24	2	counter DI4			uint32	Verenga/Nyora	counter inonyorwa, inodzimika
38	26	2	counter AI1			uint32	Verenga/Nyora	counter inonyorwa, inodzimika, max frequency 10Hz
40	28	2	counter AI2			uint32	Verenga/Nyora	counter inonyorwa, inodzimika, max frequency 10Hz
42	2A	2	counter AI3			uint32	Verenga/Nyora	counter inonyorwa, inodzimika, max frequency 10Hz
44	2C	2	counter AI4			uint32	Verenga/Nyora	counter inonyorwa, inodzimika, max frequency 10Hz
46	2E	2	DI1: nguva iripo			uint32	Verenga/Nyora	sec
48	30	2	DI2: nguva iripo			uint32	Verenga/Nyora	sec
50	32	2	DI3: nguva iripo			uint32	Verenga/Nyora	sec
52	34	2	DI4: nguva iripo			uint32	Verenga/Nyora	sec
54	36	2	AI1: nguva iripo			uint32	Verenga/Nyora	sec
56	38	2	AI2: nguva iripo			uint32	Verenga/Nyora	sec
58	3A	2	AI3: nguva iripo			uint32	Verenga/Nyora	sec
60	3C	2	AI4: nguva iripo			uint32	Verenga/Nyora	sec
62	3E	2	DI1: nguva yekuzorora			uint32	Verenga/Nyora	sec
64	40	2	DI2: nguva yekuzorora			uint32	Verenga/Nyora	sec
66	42	2	DI3: nguva yekuzorora			uint32	Verenga/Nyora	sec
68	44	2	DI4: nguva yekuzorora			uint32	Verenga/Nyora	sec
70	46	2	AI1: nguva yekuzorora			uint32	Verenga/Nyora	sec
72	48	2	AI2: nguva yekuzorora			uint32	Verenga/Nyora	sec
74	4A	2	AI3: nguva yekuzorora			uint32	Verenga/Nyora	sec
76	4C	2	AI4: nguva yekuzorora			uint32	Verenga/Nyora	sec
128	80	2	counter DI1			uint32	Verenga	counter haigoni kunyora, dzima
130	82	2	counter DI2			uint32	Verenga	counter haigoni kunyora, dzima
132	84	2	counter DI3			uint32	Verenga	counter haigoni kunyora, dzima
134	86	2	counter DI4			uint32	Verenga	counter haigoni kunyora, dzima
136	88	2	counter AI1			uint32	Verenga	counter haigoni kunyora, kudzima; max frequency 10Hz
138	8A	2	counter AI2			uint32	Verenga	counter haigoni kunyora, kudzima; max frequency 10Hz
140	8C	2	counter AI3			uint32	Verenga	counter haigoni kunyora, kudzima; max frequency 10Hz
142	8E	2	counter AI4			uint32	Verenga	counter haigoni kunyora, kudzima; max frequency 10Hz
256	100	1	modbus kero muranda	1-247	1	uint16	Verenga/Nyora
257	101	1	modbus baudrate muranda 1	0-1	0	uint16	Verenga/Nyora	0: 9600, 1: 19200
258	102	1	modbus parity muranda 1	0-2	0	uint16	Verenga/Nyora	0: hapana, 1: zvisingaite, 2: kunyange

5.2 Reset Bhatani
Paunenge wakabata bhatani reseta kwe4 masekonzi, LFC 128-2 ichagadzirisa iyo default kumisikidzwa ku02 x RS485 / Modbus.
RTU-Muranda.
Default Modbus RTU Configuration:

• Kero: 1
• Mutengo weBaud: 9600
• Parity: hapana

5.3 Inzwa Zvinotaurwa

Tsanangudzo:

• 04 chiteshi DI, akaparadzaniswa
• Kupikisa Kupinza: 4.7 kΏ
• Kusurukirwa Voltage:5000Vrms
• Logic level 0: 0-1V
• Logic level 1: 5-24V
• Basa:
• Verenga pfungwa 0/1
• Pulse Counter

5.3.1 Verenga mamiriro ane musoro 0/1
Logic kukosha muModbus Memory Mepu: 0-1
Marejista ekuchengetedza logic kukosha muModbus Memory Mepu:

• DI1__DI2: chimiro chedhijitari: inochengetedza mamiriro ane musoro echanero 1 uye chiteshi 2.
  H_byte: DI1
  L_byte: DI2
• DI3__DI4: chimiro chedhijitari: chengetedza mamiriro ane musoro echanera 3 uye chiteshi 4.
  H_byte: DI3
  L_byte: DI4

5.3.2 Pulse Counter
Kuverengera kukosha muModbus Memory Mepu, kana uchiwedzera iyo nhamba inodarika chikumbaridzo, inozodzoka otomatiki: 0 4294967295 (32bits)
Rejista inochengeta Counter value muModbus Memory Mepu haigone kudzimwa:

• Counter DI1: inochengetedza iyo logic mamiriro echiteshi 1
• Counter DI2: inochengetedza iyo logic mamiriro echiteshi 2
• Counter DI3: chengetedza iyo logic mamiriro echiteshi 3
• Counter DI4: inochengetedza iyo logic mamiriro echiteshi 4
  Rejista inochengeta Counter value muModbus Memory Mepu haigone kudzimwa:
• Hapana reset counter DI1: inochengetedza iyo logic mamiriro echiteshi 1
• Hapana reset counter DI2: inochengetedza iyo logic mamiriro echiteshi 2
• Hapana reset counter DI3: inochengetedza iyo logic mamiriro echiteshi 3
• Hapana reset counter DI4: inochengetedza iyo logic mamiriro echiteshi 4

Pulse Counter Mode:
Yakaderera-kumhanya pulse kuverenga isingasviki 10Hz ine sefa, anti-jamming:

• Seta rejista "counter DI1: nguva yekusefa" = 500-2000: Chiteshi 1 chinoverenga pulses isingasviki 10Hz
• Seta rejista "counter DI2: nguva yekusefa" = 500-2000: Chiteshi 2 chinoverenga pulses isingasviki 10Hz
• Seta rejista "counter DI3: nguva yekusefa" = 500-2000: Chiteshi 3 chinoverenga pulses isingasviki 10Hz
• Seta rejista "counter DI4: nguva yekusefa" = 500-2000: Chiteshi 4 chinoverenga pulses isingasviki 10Hz
• High-speed pulse count ine max 2KHz frequency pasina sefa:
• Seta rejista "counter DI1: nguva yekusefa" = 1: chiteshi 1 inoverenga pulses neFmax = 2kHz
• Seta rejista "counter DI2: nguva yekusefa" = 1: chiteshi 2 inoverenga pulses neFmax = 2kHz
• Seta rejista "counter DI3: nguva yekusefa" = 1: chiteshi 3 inoverenga pulses neFmax = 2kHz
• Seta rejista "counter DI4: nguva yekusefa" = 1: chiteshi 4 inoverenga pulses neFmax = 2kHz

5.4 Analogi Input

04 AI chiteshi, hapana yekuzviparadzanisa nevamwe (AI1 ndeye 4-20mA / 0-5 VDC / 0-10 VDC level sensor yekupinda)

Shandisa DIP SW kugadzirisa kuiswa kweAnalog: 0-10V, 0-20mA

Value	Mhando yeAI
0	0-10 V
1	0-20 mA

Input type:

• Kuyera voltage: 0-10V
• Kuyera ikozvino: 0-20mA
• Iyo yekumisikidzwa kweAI inoverenga yakafanana inonzwisisika mamiriro seDI, asi haina kuparadzaniswa ne pulse range ye0-24V.

Input impedance:

• Kuyera voltage: 320 kΏ
• Edza ikozvino: 499 Ώ

5.4.1 Verenga kukosha kweAnalogi
Kugadziriswa 12 mabits
Asina-Linearity: 0.1%
Analog kukosha muModbus Memory Mepu: 0-3900
Analog kukosha rejista muModbus Memory Mepu:

• AI1 analog kukosha: chengetedza kukosha kweAnalog yechiteshi 1
• AI2 analog kukosha: inochengetedza iyo Analog kukosha kwechiteshi 2
• AI3 analog kukosha: chengetedza kukosha kweAnalog yechiteshi 3
• AI4 analog kukosha: chengetedza kukosha kweAnalog yechiteshi 4

5.4.2 AI gadziriro inoshanda seDI
Hapana kuzviparadzanisa nevamwe
AI Gadzirisa AI kuti iverenge yakafanana logic mamiriro seDI ine pulse amplitude kubva 0-24V
Kune 2 counter chikumbaridzo AIx: logic chikumbaridzo 0 uye counter AIx: chikumbaridzo logic 1 mu modbus tafura: 0-4095

• Analog kukosha kweAI
• Analog Analog kukosha kweAI> counter AIx: chikumbaridzo logic 1: inoonekwa seLogic 1 mamiriro eAI.
• Counter AIx: chikumbaridzo logic 0 =

Logic Yakakosha mamiriro kukosha kweAI muModbus Memory Mepu tafura: 0-1
Iyo rejista inochengetedza hunhu hune musoro muModbus Memory Mepu:

• AI1___AI2: chimiro chedhijitari: inochengetedza mamiriro ane musoro echiteshi 1 uye chiteshi 2.
  H_byte: AI1
  L_byte: AI2
• AI3___AI4: chimiro chedhijitari: inochengetedza mamiriro ane musoro echiteshi 1 uye chiteshi 2.
  H_byte: AI3
  L_byte: AI4

5.4.3 Pulse Counter AI yakawanda 10Hz
Kuverengera kukosha muModbus Memory Mepu, kana uchiwedzera iyo nhamba mhiri kwechikumbaridzo, inozodzoka otomatiki: 0 4294967295 (32bits)
Rejista inochengeta Counter value muModbus Memory Mepu haigone kudzimwa:

• Counter AI1: inochengetedza iyo logic mamiriro echiteshi 1
• Counter AI2: chengetedza logic mamiriro echiteshi 2
• Counter AI3: chengetedza logic mamiriro echiteshi 3
• Counter AI4: chengetedza logic mamiriro echiteshi 4
  Rejista inochengeta Counter value muModbus Memory Mepu haigone kudzimwa:
• Hapana reset counter AI1: inochengetedza iyo logic mamiriro echiteshi 1
• Hapana reset counter AI2: inochengetedza iyo logic mamiriro echiteshi 2
• Hapana reset counter AI3: inochengetedza iyo logic mamiriro echiteshi 3
• Hapana reset counter AI4: chengetedza logic mamiriro echiteshi 4

5.5 ataure

04 chiteshi Relay SPDT NO / NC
Kubata chiyero: 2A / 24VDC, 0.5A / 220VAC
Kune mamiriro e LEDs:

• Led on: Close Contact
• Led off: Vhura Contact

Default Relay Register	Status of relays paunenge uchigadzirisa zvakare magetsi
3	Shanda zvinoenderana neAlarm kumisikidza

Kugadziriswa kweAlamu:

• HIHI: Relay 4 On
• HI: Relay 3 On
• LO : Relay 2 On
• LOLO: Relay 1 On

5.6 Pulse Output

01 yakasarudzika yakavhurika-muunganidzi chiteshi
Opto-coupler: Kunobva ikozvino Imax = 10mA, Vceo = 80V
Mabasa: On / Off, pulse jenareta, PWM
5.6.1 Pa/Kudzima Basa
Seta iyo Vhura-muunganidzi rejista muModbus Memory Mepu tafura:

• Seta Open-collector register: 1 => Pulse Output ON
• Seta Vhura-muunganidzi rejista: 0 => Pulse Output OFF

5.6.2 Pulse jenareta
Pulse inobuda inotamisa huwandu hwe65535 pulses, ine Fmax 2.5kHz
Gadzirisa marejista anotevera muModbus Memory Mepu tafura:

• Seta rejista "yakavhurika muunganidzi: pulse nhamba": 0-65535 => Pulse Nhamba = 65535: kutepfenyura 65535 pulses
• Seta rejista "yakavhurika muunganidzi: nguva kutenderera": (0-65535) x0.1ms => Nguva Yekutenderera = 4: Fmax 2.5kHz
• Seta rejista "yakavhurika muunganidzi: nguva pa": (0-65535) x0.1ms => Nguva Pari: ndiyo inonzwisisika nguva 1 yekupuruzira
• Seta rejista "yakavhurika muunganidzi ctrl" = 3 => gadzira iyo Pulse Output kuti ibudise kupuruzira uye kutanga kupuruzira, gadzira huwandu hwakakwana hwemapuru mu "akavhurika muunganidzi: pulse nhamba" register => mira pulse jenareta uye rejista "vhura muunganidzi ctrl ”= 0

5.6.3 PWM
Yakawanda frequency 2.5kHz
Gadzirisa marejista anotevera muModbus Memory Mepu tafura:

• Seta rejista "yakavhurika muunganidzi ctrl" = 2 => gadzirisa Pulse Output PWM basa
• Seta rejista "yakavhurika muunganidzi: nguva kutenderera": (0-65535) x0.1ms => Nguva Yekutenderera = 4: Fmax 2.5kHz
• Seta rejista "yakavhurika muunganidzi: nguva pa": (0-65535) x0.1ms => Nguva Pari: ndiyo inonzwisisika nguva 1 yekupuruzira

Installation

6.1 Kuisa nzira

6.2 Wiring ine Level Sensor

Configuration

7.1 Kumba Screen

CHIKANGWA: Chinja kune yechipiri skrini ine ruzivo rwakadzama
KUYERA: Ratidza Level Alert
MUSHA: Dzokera kuHome Screen
CONFIG. (Default Password: a): Enda kuSetting Screen
7.2 Kuseta skrini (Default Password: a)
7.2.1 Screen 1

ADCs: Raw chiratidzo kukosha kwechiteshi AI1
Chikamu (Chiyero): Iyo nhanho inoenderana neiyo ADC chiratidzo mushure mekugadzirisa
Decimal Nzvimbo Level:Decimal nhamba yemanhamba mushure mechikamu cheNhamba 0-3 (00000, 1111.1, 222.22, 33.333)
Chikamu chechikamu: chiyero chezvikamu, 0-3 (0: mm, 1: cm, 2: m, 3: inchi)
Mu1: Pinda kukosha kweADC mushure mekuisa 4 mA / 0 VDC muAI1 yekuenzanisa pa 0 level.
Chikero 1: Chiyero chakakosha chinoratidzwa chinoenderana nehuwandu hwakaiswa mu1 (kazhinji 0)
Mu2: Pinda iyo ADC kukosha mushure mekuisa 20 mA / 10 VDC muAI1 kuti ienzaniswe paYakazara nhanho.
Chikero 2: Chiyero chakakosha chinoratidzwa chinoenderana nehuwandu hwakaiswa mu2
Span Level: Yakanyanya kukosha yeNhamba (Span Level ≥ Chikero 2)
Decimal Places Volume: Decimal nhamba yemanhamba mushure mechikamu cheVhoriyamu 0-3 (00000, 1111.1, 222.22, 33.333)
Vhoriyamu yeyuniti: zvikamu zvevhoriyamu 0-3 (0: lit, 1: cm, 2: m3, 3:%)
7.2.2 Screen 2

Level Hi Hi Set poindi (Uniti): Yepamusoro yepamusoro yeAlarm Level
Level Hi Hi Hys (Chikwata): Yakakwira level hysteresis yeAlarm Level
Level Hi Set poindi (Uniti): High level yeAlarm Level
Level Hi Hys (Chikwata): High level hysteresis yeAlarm Level
Level Lo Set poindi (Uniti): Yakaderera mwero weAlarm Level
Level Lo Hys (Chikwata): Yakaderera level hysteresis yeAlarm Level
Level Lo Lo Set poindi (Uniti): Yakaderera Low level yeAlarm Level
Level Lo Lo Hys (Chikwata): Low Low level hysteresis yeAlarm Level
Alarm Mode: 0: Level, 1: Vhoriyamu
Span Volume (Chikwata): Yakanyanya kukosha yevhoriyamu
7.2.3 Screen 3

Vhoriyamu Hi Hi Set poindi (Uniti): High High volume yeAlarm Vhoriyamu
Vhoriyamu Hi Hi Hys (Chikamu): Yakakwira vhoriyamu hysteresis yeAlarm Vhoriyamu
Vhoriyamu Hi Set poindi (Uniti): Yakakwira vhoriyamu yeAlarm Vhoriyamu
Vhoriyamu Hi Hys (Chikamu): Yakakwira vhoriyamu hysteresis yeAlarm Vhoriyamu
Vhoriyamu Lo Set poindi (Uniti): Yakaderera vhoriyamu yeAlarm Vhoriyamu
Vhoriyamu Lo Hys (Chikamu): Yakaderera vhoriyamu hysteresis yeAlarm Vhoriyamu
Vhoriyamu Lo Lo Set poindi (Uniti): Yakaderera Yakaderera vhoriyamu yeAlarm Vhoriyamu
Vhoriyamu Lo Lo Hys (Chikamu): Yakaderera Yakaderera vhoriyamu hysteresis yeAlarm Vhoriyamu
Run Total: Mhanya basa rose. 0-1 (0: Kwete 1: Hongu)
7.2.4 Screen 4

Kuzadza (Chikamu): Basa rose: yakazara yakaiswa mutangi
Kushandiswa (Uniti): Zvose basa: kushandiswa kwese kwetangi
Decimal Places Total: Decimal nhamba yemaparamendi Kuzadza, Kushandisa, NRT Kuzadza, NRT Kushandiswa pane kuratidza peji (kwete iyo yekumisikidza peji)
Delta Total (Chikamu): Hysteresis level yebasa rose
Modbus Kero: Modbus kero yeLFC128-2, 1-247
Modbus Baurate S1: 0-1 (0 : 9600 , 1 : 19200)
Modbus Parity S1: 0-2 (0: hapana, 1: odd, 2: even)
Modbus Baurate S2: 0-1 (0 : 9600 , 1 : 19200)
Modbus Parity S2: 0-2 (0: hapana, 1: odd, 2: even)
Nhamba Yezvibodzwa: Nhamba yemapoinzi ari patafura yekushandura kubva padanho kuenda kuvhoriyamu, 1-166
7.2.5 Screen 5

Point 1 Level (Level Unit): Level paPoint 1
Pfungwa 1 Vhoriyamu (Vhoriyamu Chikamu): Vhoriyamu inoenderana paPoint 1
Point 166 Level (Level Unit): Mwero wemafuta paPoint 166
Pfungwa 166 Vhoriyamu (Vhoriyamu Chikamu): Vhoriyamu inoenderana paPoint 166
7.2.6 Screen 6

Pasiwedhi: Password yekupinda iyo Setting peji, 8 ASCII mavara
Tangi Zita: Tangi zita rinoratidzwa pachiratidziro chikuru

Kugadzirisa matambudziko

Aihwa.	Phenomena	Chikonzero	Solutions
1	Modbus yatadza kutaura	Modbus LED Mamiriro: LED yakadzimwa: haina kugamuchira data LED iri kubwaira: iyo Modbus gadziriso haisi iyo chaiyo	Tarisa kubatana Tarisa kugadzirisa kweModbus: Kero, Baud Rate, Parity
2	Nguva yekupedza Modbus	Noise inooneka pamutsetse	Gadzirisa Baudrate 9600 uye shandisa tambo yakamonyoroka ine anti-jamming dziviriro
3	Sensor Yakabviswa	Sensor uye LFC128 yakarasika kubatana	Kutarisa chinongedzo Chengetedza rudzi rwe sensor (LFC128-2 inongobatana chete ne0-10VDC / 4- 20mA analog sensor type) Tarisa switch kuti uone kana yakavhurwa nenzira kwayo Tarisa kuti sensor yekubatanidza ndeyechokwadi AI1
4	Linearization tafura kukanganisa	Kukanganisa pakushandura tafura kubva padanho kuenda kuvhoriyamu	Tarisa magadzirirwo etafura yekutendeuka kubva padanho kuenda kuvhoriyamu

Tsigira vanobatika

Mugadziri
Nhoroondo ye Daviteq Technologies Inc
No.11 Street 2G, Nam Hung Vuong Res., An Lac Ward, Binh Tan Dist., Ho Chi Minh Guta, Vietnam.
Tel: +84-28-6268.2523/4 (ext.122)
Email: info@daviteq.com
www.daviteq.com

Zvinyorwa / Zvishandiso

daviteq LFC128-2 Yepamusoro Chiratidziro Chiratidziro [pdf] Bhuku reMirayiridzo LFC128-2, LFC128-2 Advanced Level Display Controller, Advanced Level Display Controller, Level Display Controller, Display Controller

References

• User Manual