NATIONAL INSTRUMENTS NI PCI-GPIB Performance Interface Controller

Cov ntaub ntawv khoom

Specifications:

• Cov Qauv Khoom: NI PCI-GPIB, NI PCIe-GPIB, NI PXI-GPIB, NI PMC-GPIB
• Compatibility: Solaris
• Hnub tso tawm: Peb Hlis 2009

Cov lus qhia siv khoom

Txhim kho NI PCI-GPIB lossis NI PCIe-GPIB:

1. Nkag mus ua tus superuser.
2. Kaw lub kaw lus los ntawm kev ntaus cov lus txib hauv qab no ntawm kab hais kom ua: sync; synchronization; kaw
3. Fais fab tawm lub computer tom qab kaw thaum khaws nws ntsaws rau hauv av.
4. Tshem lub hau saum toj kawg nkaus kom nkag mus rau qhov nthuav dav.
5. Nrhiav qhov tsis siv PCI lossis PCI Express qhov.
6. Tshem lub hau npog qhov sib thooj.
7. Ntxig lub GPIB board rau hauv lub qhov nrog GPIB connector sticking tawm ntawm qhov qhib ntawm lub vaj huam sib luag rov qab. Txhob yuam nws.
8. Hloov lub hau npog sab saum toj lossis nkag mus rau vaj huam sib luag.
9. Fais fab rau koj lub computer kom tiav lub installation.

Installing NI PXI-GPIB:

1. Nkag mus ua tus superuser.
2. Kaw lub kaw lus los ntawm kev ntaus cov lus txib hauv qab no: sync; synchronization; kaw
3. Fais fab tawm ntawm PXI lossis CompactPCI chassis tom qab kaw.
4. Tshem tawm lub vaj huam sib luag muab tub lim rau qhov uas xaiv qhov peripheral.
5. Tshem tawm cov hluav taws xob zoo li qub los ntawm kev kov ib feem hlau ntawm lub chassis.
6. Ntxig NI PXI-GPIB rau hauv lub qhov uas siv lub injector/ejector kov.
7. Screw lub vaj huam sib luag pem hauv ntej ntawm NI PXI-GPIB mus rau mounting rail ntawm lub chassis.
8. Fais fab rau koj lub PXI lossis CompactPCI chassis kom tiav kev teeb tsa.

Cov lus nug nquag nug (FAQ):

• Q: Kuv tuaj yeem tiv thaiv electrostatic puas thaum tuav lub rooj tsavxwm GPIB?
  A: Txhawm rau kom tsis txhob muaj kev puas tsuaj electrostatic, kov lub pob yas antistatic rau ib feem hlau ntawm koj lub computer lossis lub cev chassis ua ntej tshem lub rooj tsavxwm ntawm lub pob.
• Q: Kuv yuav ua li cas yog tias lub rooj tsavxwm GPIB tsis haum rau hauv qhov chaw thaum lub sijhawm teeb tsa?
  A: Tsis txhob yuam lub rooj tsavxwm rau hauv qhov chaw. Xyuas kom meej tias nws tau ua raws nraim nrog lub qhov thiab maj mam ntxig nws yam tsis siv lub zog ntau dhau.

Txhim kho Koj NI PCI-GPIB, NI PCIe-GPIB, NI PXI-GPIB, lossis NI PMC-GPIB thiab NI-488.2 rau Solaris

• Cov ntaub ntawv no piav qhia txog yuav ua li cas rau nruab thiab teeb tsa koj GPIB hardware thiab NI-488.2 software. Xa mus rau ntu uas piav qhia txog kev teeb tsa rau koj lub rooj tsav xwm tshwj xeeb. Lwm cov ntaub ntawv, suav nrog cov ntaub ntawv siv software, muaj nyob rau ntawm koj NI-488.2 software rau Solaris CD hauv \documentation folder.
• Ua ntej koj nruab koj GPIB maub los, sab laj phau ntawv uas tuaj nrog koj lub chaw ua haujlwm rau cov lus qhia tshwj xeeb thiab ceeb toom. Koj yuav tsum muaj cai superuser rau nruab qhov kho vajtse thiab software.

Kev qhia txog kev txhim kho

Txhim kho NI PCI-GPIB lossis NI PCIe-GPIB

Ceev faj
Electrostatic paug tuaj yeem ua rau ntau yam khoom ntawm koj lub rooj tsavxwm GPIB. Txhawm rau kom tsis txhob muaj kev puas tsuaj electrostatic thaum koj tuav lub module, kov lub pob yas antistatic rau ib qho hlau ntawm koj lub computer chassis ua ntej koj tshem lub rooj tsavxwm ntawm lub pob.

Ua kom tiav cov kauj ruam hauv qab no txhawm rau nruab NI PCI-GPIB lossis NI PCIe-GPIB.

1. Nkag mus ua tus superuser. Txhawm rau ua tus superuser, ntaus su hauv paus thiab nkag mus rau hauv paus lo lus zais.
2. Kaw koj lub kaw lus los ntawm kev ntaus cov lus txib hauv qab no ntawm kab hais kom ua: sync; synchronization; kaw
3. Faib koj lub computer tom qab nws kaw lawm. Khaws lub computer ntsaws rau hauv kom nws nyob hauv av thaum koj nruab GPIB board.
4. Tshem lub hau saum toj kawg nkaus (lossis lwm qhov chaw nkag) kom muab koj tus kheej nkag mus rau lub khoos phis tawj nthuav dav.
5. Nrhiav ib qho PCI lossis PCI Express qhov uas tsis siv hauv koj lub computer.
6. Tshem lub hau npog qhov sib thooj.
7. Ntxig lub GPIB board rau hauv lub qhov nrog GPIB connector sticking tawm ntawm qhov qhib ntawm lub vaj huam sib luag tom qab, raws li pom nyob rau hauv daim duab 1. Nws yuav yog ib tug nruj haum tab sis tsis txhob yuam lub rooj tsavxwm rau hauv qhov chaw.
8. Hloov lub hau saum toj kawg nkaus (lossis lub vaj huam sib luag nkag mus rau PCI lossis PCI Express qhov).
9. Fais fab rau koj lub computer. GPIB interface board yog tam sim no ntsia.

Installing the NI PXI-GPIB

Ceev faj
Electrostatic paug tuaj yeem ua rau ntau yam khoom ntawm koj lub rooj tsavxwm GPIB. Txhawm rau kom tsis txhob muaj kev puas tsuaj electrostatic thaum koj tuav lub module, kov lub pob yas antistatic rau ib feem hlau ntawm koj lub chassis ua ntej koj tshem lub rooj tsavxwm ntawm lub pob.

Ua kom tiav cov kauj ruam hauv qab no txhawm rau nruab NI PXI-GPIB.

1. Nkag mus ua tus superuser. Txhawm rau ua tus superuser, ntaus su hauv paus thiab nkag mus rau hauv paus lo lus zais.
2. Kaw koj lub kaw lus los ntawm kev ntaus cov lus txib hauv qab no ntawm kab hais kom ua: sync; synchronization; kaw
3. Faib koj lub PXI lossis CompactPCI chassis tom qab nws tau kaw lawm. Khaws lub chassis ntsaws rau hauv kom nws nyob hauv av thaum koj nruab NI PXI-GPIB.
4. Xaiv qhov tsis siv PXI lossis CompactPCI qhov txuas txuas. Rau qhov ua tau zoo tshaj plaws, NI PXI-GPIB muaj ib qho onboard DMA maub los uas tsuas yog siv tau yog tias lub rooj tsavxwm tau nruab rau hauv qhov chaw uas txhawb nqa npav npav. National Instruments pom zoo kom txhim kho NI PXI-GPIB hauv ib lub qhov. Yog tias koj nruab lub rooj tsavxwm hauv qhov tsis yog npav npav, koj yuav tsum lov tes taw NI PXI-GPIB onboard DMA maub los siv lub rooj tsavxwm-theem hu ibdma. Xa mus rau NI-488.2M Software Reference Manual kom ua tiav cov lus piav qhia ntawm ibdma.
5. Tshem tawm lub vaj huam sib luag muab tub lim rau qhov peripheral qhov uas koj tau xaiv.
6. Kov ib qho hlau ntawm koj lub chassis kom tso tawm cov hluav taws xob zoo li qub uas yuav nyob ntawm koj cov khaub ncaws lossis lub cev.
7. Ntxig NI PXI-GPIB rau hauv qhov chaw xaiv. Siv lub injector / ejector kov kom txhaj tshuaj tag nrho rau hauv qhov chaw. Daim duab 2 qhia yuav ua li cas rau nruab NI PXI-GPIB rau hauv PXI lossis CompactPCI chassis.
8. Screw lub vaj huam sib luag pem hauv ntej ntawm NI PXI-GPIB mus rau pem hauv ntej vaj huam sib luag mounting rail ntawm PXI lossis CompactPCI chassis.
9. Fais fab rau koj lub PXI lossis CompactPCI chassis. NI PXI-GPIB interface board yog tam sim no ntsia.

Installing the NI PMC-GPIB

Ceev faj
Electrostatic paug tuaj yeem ua rau ntau yam khoom ntawm koj lub rooj tsavxwm GPIB. Txhawm rau kom tsis txhob muaj kev puas tsuaj electrostatic thaum koj tuav lub module, kov lub pob yas antistatic rau ib qho hlau ntawm koj lub computer chassis ua ntej koj tshem lub rooj tsavxwm ntawm lub pob.

Ua kom tiav cov kauj ruam hauv qab no txhawm rau nruab NI PMC-GPIB.

1. Nkag mus ua tus superuser. Txhawm rau ua tus superuser, ntaus su hauv paus thiab nkag mus rau hauv paus lo lus zais.
2. Kaw koj lub kaw lus los ntawm kev ntaus cov lus txib hauv qab no ntawm kab hais kom ua: sync; synchronization; kaw
3. Fais fab tawm koj qhov system.
4. Nrhiav ib qho PMC qhov uas tsis siv hauv koj lub cev. Tej zaum koj yuav xav tau tshem tus tswv tsev los ntawm qhov system kom nkag mus rau lub qhov.
5. Tshem tawm qhov sib thooj qhov muab tub lim vaj huam sib luag los ntawm tus tswv tsev.
6. Kov ib qho hlau ntawm koj lub chassis kom tso tawm cov hluav taws xob zoo li qub uas yuav nyob ntawm koj cov khaub ncaws lossis lub cev.
7. Ntxig NI PMC-GPIB rau hauv lub qhov raws li qhia hauv daim duab 3. Tej zaum nws yuav yog qhov nruj tab sis tsis txhob yuam lub rooj tsavxwm rau hauv qhov chaw.
8. Siv lub mounting hardware muab los fasten NI PMC-GPIB rau tus tswv tsev.
9. Reinstall tus tswv tsev, yog tias koj tshem tawm nws los nruab NI PMC-GPIB.
10. Fais fab rau koj qhov system. NI PMC-GPIB interface board yog tam sim no ntsia.

Txhim kho NI-488.2
Ua kom tiav cov kauj ruam hauv qab no rau nruab NI-488.2 rau Solaris.

1. Ntxig NI-488.2 rau Solaris installation CD-ROM.
2. Koj yuav tsum muaj cov cai superuser ua ntej koj tuaj yeem nruab NI-488.2 rau Solaris. Yog hais tias koj tsis yog ib tug superuser, ntaus su root thiab nkag mus rau hauv paus lo lus zais.
3. Ntxiv NI-488.2 rau lub operating system los ntawm kev ua cov hauv qab no:
   • CD cia li mounts sai li sai tau thaum koj ntxig CD. Yog tias qhov no tsis ua haujlwm ntawm koj lub chaw ua haujlwm, koj yuav tsum tuav koj lub CD-ROM ntaus ntawv manually.
   • Nkag mus rau cov lus txib hauv qab no ntxiv NI-488.2 rau koj lub cev: /usr/sbin/pkgadd -d /cdrom/cdrom0 NIpcigpib
4. Ua raws li cov lus qhia ntawm koj lub vijtsam kom ua tiav qhov kev teeb tsa.

Configuring lub Software nrog ibconf

Configuring the Software with ibconf (Optional)

• ibconf yog qhov kev sib tham sib txuas uas koj tuaj yeem siv los tshuaj xyuas lossis hloov kho qhov teeb tsa ntawm tus tsav tsheb. Tej zaum koj yuav xav khiav ibconf los hloov cov chaw ntawm cov software tsis. Koj yuav tsum muaj cai superuser los khiav ibconf.
• ibconf feem ntau piav qhia tus kheej thiab muaj cov ntxaij vab tshaus uas piav qhia txhua yam lus txib thiab kev xaiv. Yog xav paub ntxiv txog kev siv ibconf, xa mus rau NI-488.2M Software Reference Manual.

Ua kom tiav cov kauj ruam hauv qab no txhawm rau hloov pauv qhov tsis zoo ntawm koj NI-488.2 software. Tus tsav tsheb yuav tsum tsis txhob siv thaum koj khiav ibconf.

1. Nkag mus ua tus superuser (hauv paus).
2. Ntaus cov lus txib nram qab no kom pib ibconf: ibconf

Tom qab koj tau nruab thiab teeb tsa lub software, koj yuav tsum txheeb xyuas qhov kev teeb tsa. Xa mus rau Kev Tshawb Fawb Cov Kev Txhim Kho.

Tshem tawm NI-488.2 (Yeem)
Yog tias koj puas tau txiav txim siab tsis siv koj NI PCI-GPIB, NI PCIe-GPIB, NI PXI-GPIB, lossis NI PMC-GPIB, koj tuaj yeem tshem tawm lub rooj tsavxwm thiab NI-488.2 software. Txhawm rau tshem tawm NI-488.2 los ntawm kev teeb tsa cov ntsiav, koj yuav tsum muaj cai superuser thiab tus tsav tsheb yuav tsum tsis txhob siv. Nkag mus rau cov lus txib hauv qab no kom tshem tawm cov software:

• pkgrm Nipcigpib

Xyuas qhov Installation

Tshooj lus no piav qhia yuav ua li cas txheeb xyuas qhov kev teeb tsa software.

Txheeb xyuas qhov System Boot Messages
Yog tias cov lus txwv tsis pub tshaj tawm txog NI-488.2 qhia ntawm lub console, nyob rau hauv qhov kev hais kom ua lub qhov rais, lossis hauv cov ntawv teev lus (feem ntau /var/adm/messages) thaum lub sijhawm teeb tsa software, tus neeg tsav tsheb tau tsim kev sib txuas lus nrog cov cuab yeej kho vajtse thiab lees paub nws.

Cov zaub suav nrog lub rooj tsavxwm nkag gpib lub npe thiab tus lej cim (S/N) rau txhua lub rooj tsavxwm GPIB hauv lub system.

Khiav qhov Software Installation Test
Qhov kev kuaj xyuas software muaj ob ntu: ibtsta thiab ibtstb.

• ibtsta tshawb xyuas qhov tseeb nodes /dev/gpib thiab /dev/gpib0 thiab nkag mus rau tus neeg tsav tsheb kom raug.
• ibtstb xyuas kom raug DMA thiab cuam tshuam kev ua haujlwm. ibtstb xav tau GPIB analyzer, xws li National Instruments GPIB analyzer. Koj tuaj yeem tshem tawm qhov kev sim no yog tias tsis muaj qhov ntsuas ntsuas.

Ua kom tiav cov kauj ruam hauv qab no los khiav qhov kev kuaj xyuas software.

1. Ntaus cov lus txib hauv qab no txhawm rau txheeb xyuas qhov kev teeb tsa software: ibtsta
2. Yog tias ibtsta ua tiav yam tsis muaj qhov yuam kev thiab koj muaj lub ntsuas tsheb npav, txuas lub tsheb npav txheeb xyuas mus rau GPIB pawg thawj coj saib thiab khiav ibtstb los ntawm kev ntaus cov lus txib hauv qab no: ibtstb

Yog tias tsis muaj qhov yuam kev tshwm sim, tus tsav tsheb NI-488.2 raug teeb tsa kom raug. Yog hais tias qhov yuam kev tshwm sim, xa mus rau lub Troubleshooting yuam kev Messages ntu rau kev daws teeb meem cov ntaub ntawv.

Troubleshooting yuam kev Messages

Yog tias ibtsta ua tsis tiav, qhov program tsim cov lus yuam kev uas tshwm sim ntawm koj lub vijtsam. Cov lus yuam kev no piav qhia qhov ua yuam kev thaum koj khiav ibtsta thiab piav qhia koj yuav kho qhov teeb meem li cas. Rau example, cov lus hauv qab no yuav tshwm sim ntawm koj lub vijtsam yog tias koj tsis nco qab txiav tag nrho koj cov GPIB cables:

• Qhov tseeb tias ENOL yuam kev tsis tau txais thaum xav tau qhia tias muaj peev xwm muaj lwm yam khoom siv hauv tsheb npav. Thov txiav txhua GPIB cables los ntawm GPIB pawg thawj coj saib, tom qab ntawd ua qhov kev sim no dua.
• Yog tias koj tseem tsis tuaj yeem khiav ibtsta thiab / lossis ibtstb ua tiav tom qab koj ua raws li cov lus pom zoo los ntawm cov lus yuam kev, hu rau National Instruments.

Siv NI-488.2 nrog Solaris

Tshooj lus no pab koj pib nrog NI-488.2 rau Solaris.

Siv ibic
NI-488.2 software suav nrog Interface Bus Interactive Control utility, ibic. Koj tuaj yeem siv ibic nkag mus rau NI-488 kev ua haujlwm thiab IEEE 488.2-style functions (tseem hu ua NI-488.2 routines) sib tham sib thiab tso saib cov txiaj ntsig ntawm kev hu xov tooj tau txais. Yog tsis sau ib daim ntawv thov, koj tuaj yeem siv ibic los ua cov hauv qab no:

• Txheeb xyuas GPIB kev sib txuas lus nrog koj lub cuab yeej sai thiab yooj yim
• Paub txog cov lus txib ntawm koj lub cuab yeej
• Tau txais cov ntaub ntawv los ntawm koj lub cuab yeej GPIB
• Kawm tshiab NI-488.2 cov haujlwm thiab cov haujlwm niaj hnub ua ntej muab lawv tso rau hauv koj daim ntawv thov
• Teeb meem teeb meem nrog koj daim ntawv thov

Nkag mus rau cov lus txib nram qab no kom khiav ibic: ibic

Yog xav paub ntxiv txog ibic, saib Tshooj 6, ibic, ntawm NI-488.2M Software Reference Manual.

Kev xav txog kev ua haujlwm

Nyob ntawm cov lus programming koj siv los tsim koj daim ntawv thov, koj yuav tsum suav nrog qee yam files, nqe lus, lossis kev hloov pauv thoob ntiaj teb thaum pib ntawm koj daim ntawv thov. Rau example, koj yuav tsum suav lub header file sys/ugpib.h hauv koj qhov chaws yog tias koj siv C/C++.

Koj yuav tsum txuas lub tsev qiv ntawv interface hom lus nrog koj cov lej sau ua ke. Txuas lub tsev qiv ntawv GPIB C hom lus siv ib qho ntawm cov lus txib hauv qab no, qhov twg example.c yog koj lub npe thov:

• cc ua example.c -lgpib
  or
• cc ua example.c -dy -lgpib
  or
• cc ua example.c -dn -lgpib

-dy qhia txog kev sib txuas dynamic, uas yog txoj hauv kev. Nws txuas daim ntawv thov rau libgpib.so. -dn qhia txog kev sib txuas zoo li qub hauv qhov txuas txuas. Nws txuas daim ntawv thov rau libgpib.a. Yog xav paub ntxiv txog kev sau thiab sib txuas, xa mus rau nplooj ntawv txiv neej rau cc thiab ld. Yog xav paub ntxiv txog txhua txoj haujlwm NI-488 thiab IEEE 488.2-style muaj nuj nqi, xaiv txoj kev programming, tsim koj daim ntawv thov, lossis sau thiab sib txuas, xa mus rau NI-488.2M Software Reference Manual.

Cov Lus Nug

Dab tsi yog qhov yuam kev yog ibfind rov qab a –1?

• Tus tsav tsheb yuav tsis raug teeb tsa kom raug, lossis cov nodes yuav tsis raug tsim thaum tus tsav tsheb thauj khoom. Sim tshem tawm thiab rov nruab NI-488.2 ntawm CD-ROM.
• Tsis tas li ntawd, cov file tej zaum yuav xav tau kev nyeem / sau cov cai uas koj tsis muaj, lossis koj yuav tau hloov npe lub cuab yeej. Nco ntsoov tias cov npe ntaus ntawv hauv koj daim ntawv thov kev pab cuam cuam tshuam cov npe ntaus ntawv hauv ibconf.

Kuv yuav tsum muaj ntaub ntawv dab tsi ua ntej kuv hu rau National Instruments?
Muaj cov txiaj ntsig ntawm kev kuaj mob ibtsta. Koj kuj yuav tsum tau khiav ibic los sim nrhiav qhov chaw ntawm koj qhov teeb meem.

Puas yog tus tsav tsheb no ua haujlwm nrog 64-ntsis Solaris?
Yog lawm. NI-488.2 rau Solaris ua haujlwm nrog 32-ntsis lossis 64-ntsis Solaris. Tsis tas li, koj tuaj yeem tsim 32-ntsis lossis 64-ntsis daim ntawv thov. Tus neeg tsav tsheb nruab ob 32-ntsis thiab 64-ntsis lus interface qiv ntawm lub kaw lus. Yog xav paub ntxiv txog kev siv NI-488.2 hom lus interfaces, xa mus rau Siv NI-488.2 nrog Solaris ntu.

Puas yog kuv tus NI PCI-GPIB, NI PXI-GPIB, lossis NI PMC-GPIB puas ua haujlwm hauv 64-ntsis qhov?
Yog lawm. Cov qauv tam sim no ntawm tag nrho peb lub rooj tsavxwm yuav ua haujlwm hauv 32 lossis 64-ntsis slots, nrog rau 3.3V lossis 5Vslots.

Kev Pabcuam Kev Pabcuam thiab Kev Pabcuam Kev Ua Haujlwm

Mus saib cov ntu nram qab no ntawm cov khoom plig tau txais txiaj ntsig National Instruments Web site ntawm ni.com ib rau kev txhawb nqa thiab kev pabcuam tshaj lij:

• Kev them nyiaj yug-Technical support at ni.com/support suav nrog cov peev txheej hauv qab no:
  • Kev Pabcuam Kev Pab Tus Kheej—Rau cov lus teb thiab kev daws teeb meem, mus saib ni.com/support rau software tsav tsheb thiab hloov tshiab, ib qho kev tshawb nrhiav KnowledgeBase, cov khoom siv phau ntawv, cov kauj ruam los ntawm kev daws teeb meem wizards, ntau txhiab tus example programs, tutorials, application notes, instrument drivers, thiab hais txog. Cov neeg siv sau npe kuj tau txais kev nkag mus rau
    NI Discussion Forums ntawm ni.com/forums. NI Applications Engineers xyuas kom txhua lo lus nug xa online tau txais cov lus teb.
  • Standard Service Program Membership—Qhov kev pabcuam no tso cai rau cov tswvcuab nkag mus rau NI Applications Engineers ncaj qha ntawm xov tooj thiab email rau ib-rau-ib qho kev txhawb nqa nrog rau kev nkag mus rau cov kev qhia tshwj xeeb los ntawm Kev Pabcuam Kev Pabcuam. NI muab kev ua tswv cuab pub dawb rau ib xyoos tom qab kev yuav khoom, tom qab ntawd koj tuaj yeem txuas ntxiv mus txuas ntxiv koj cov txiaj ntsig.
    Yog xav paub ntxiv txog lwm txoj kev pab txhawb nqa hauv koj cheeb tsam, mus saib ni.com/services ib, lossis hu rau koj lub chaw haujlwm hauv zos ntawm ni.com/contact.
• Kev cob qhia thiab ntawv pov thawj— Mus saib ni.com/training ib rau kev cob qhia tus kheej, eLearning virtual chav kawm, sib tham sib CDs, thiab cov ntaub ntawv pov thawj. Koj tseem tuaj yeem sau npe rau tus kws qhia-coj, kev qhia tes ntawm cov chaw thoob ntiaj teb.
• Kev sib koom ua ke-Yog tias koj muaj sijhawm txwv, txwv cov peev txheej hauv tsev, lossis lwm yam kev sib tw, National Instruments Alliance Partner tuaj yeem pab. Yog xav paub ntxiv, hu rau koj lub chaw haujlwm NI hauv zos lossis mus ntsib
  ni.com/ib.
• Tshaj Tawm Txog Kev Ua Raws Cai (DoC)-A DoC yog peb qhov kev thov ua raws li Pawg Sab Laj ntawm European Cov Zej Zog siv cov chaw tsim khoom tshaj tawm ntawm kev ua raws. Cov txheej txheem no them rau cov neeg siv kev tiv thaiv rau electromagnetic compatibility (EMC) thiab cov khoom muaj kev ruaj ntseg. Koj tuaj yeem tau txais DoC rau koj cov khoom los ntawm kev mus saib ni.com/certification.
• Calibration Certificate - Yog tias koj cov khoom txhawb nqa calibration, koj tuaj yeem tau txais daim ntawv pov thawj calibration rau koj cov khoom ntawm ni.com/calibration.

Yog koj tshawb nrhiav ni.com ib thiab nrhiav tsis tau cov lus teb uas koj xav tau, hu rau koj lub chaw haujlwm hauv zos lossis NI lub hauv paus chaw haujlwm. Cov xov tooj rau peb cov chaw ua haujlwm thoob ntiaj teb tau teev nyob rau pem hauv ntej ntawm phau ntawv no. Koj tseem tuaj yeem mus saib Lub Chaw Haujlwm Thoob Ntiaj Teb ntawm ni.com/niglobal mus rau lub chaw ua haujlwm Web cov chaw, uas muab cov ntaub ntawv tiv tauj tshiab, txhawb nqa xov tooj, email chaw nyob, thiab cov xwm txheej tam sim no.

National Instruments, NI, ni.com ib, and LabVIEW yog cov cim lag luam ntawm National Instruments Corporation. Saib rau Cov Lus Cog Tseg ntawm Kev Siv Tshooj ntawm ni.com/legal Yog xav paub ntxiv txog National Instruments trademarks. Lwm cov khoom lag luam thiab cov npe tuam txhab tau hais hauv no yog cov cim lag luam lossis cov npe lag luam ntawm lawv cov tuam txhab. Rau patents npog National Instruments cov khoom / thev naus laus zis, xa mus rau qhov chaw tsim nyog: Pab » Patents hauv koj cov software, patents.txt file ntawm koj cov xov xwm, lossis National Instruments Patent Notice ntawm ni.com/patents.

© 2003-2009 National Instruments Corporation. Txhua txoj cai.

COMREHENSIVE SERVICES

Peb muaj kev sib tw kho thiab calibration kev pab cuam, nrog rau cov ntaub ntawv siv tau yooj yim thiab cov peev txheej rub tawm dawb.

Muag koj cov nyiaj seem

• Peb yuav tshiab, siv, decommissioned, thiab seem seem ntawm txhua NI series.
• Peb ua haujlwm tawm qhov kev daws teeb meem zoo tshaj plaws kom haum rau koj tus kheej xav tau.
  Muag Rau Nyiaj Ntsuab Tau txais credit   Tau txais kev lag luam-hauv Deal

TSIS MUAJ NI HARDWARE IN STOCK & READY SHIP
Peb cov khoom tshiab, Tshaj Tawm Tshiab, Kho dua tshiab, thiab kho dua tshiab NI Hardware.

• Thov ib daim Quote Nyem qhov no PCIe-GPIB

Kev sib txuas ntawm qhov sib txawv ntawm cov chaw tsim khoom thiab koj qhov kev sim qub txeeg qub teg.

• 1-800-915-6216 Ib
• www.apexwaves.com
• sales@apexwaves.com.

Tag nrho cov khoom lag luam, hom, thiab cov npe khoom lag luam yog cov cuab yeej ntawm lawv cov tswv.

Cov ntaub ntawv / Cov ntaub ntawv

NATIONAL INSTRUMENTS NI PCI-GPIB Performance Interface Controller [ua pdf] Daim ntawv qhia kev teeb tsa NI PCI-GPIB Performance Interface Controller, NI PCI-GPIB, Performance Interface Controller, Interface Controller, Controller

Cov ntaub ntawv

• Cov neeg siv phau ntawv