Ulwazi Lomkhiqizo
I-RC-CDFO Isilawuli Segumbi Esihlelwe Ngaphambili
I-RC-CDFO iyisilawuli segumbi esihlelwe ngaphambilini esivela ochungechungeni lwe-Regio Midi esiklanyelwe ukulawula ukushisisa nokupholisa kumasistimu wamakhoyili wabalandeli. Ihlanganisa ukuxhumana nge-RS485 (i-Modbus, i-BACnet noma i-EXOline), ukumisa okusheshayo nokulula ngeThuluzi Lohlelo Lokusebenza, ukufaka kalula, kanye nokulawula kokuvula/ukuvala noma okungu-0…10 V. Isilawuli sinokubonisa okukhanyisiwe kanye nokokufaka kwesitholi sokuhlala, ukuthintana kwewindi, inzwa yokufingqa, noma umsebenzi wokushintsha. Ibuye ibe nenzwa yokushisa yegumbi eyakhelwe ngaphakathi futhi ingaxhunywa kunzwa yangaphandle yegumbi lokushisa, ukushintsha-over, noma ukunikeza umkhawulo wokushisa komoya (PT1000).
Isicelo
Izilawuli ze-Regio zifanele ukusetshenziswa ezakhiweni ezidinga ukunethezeka okuphelele nokuncishiswa kokusetshenziswa kwamandla, njengamahhovisi, izikole, izikhungo zezitolo, izikhumulo zezindiza, amahhotela nezibhedlela.
Abapheki
I-RC-CDFO ingakwazi ukulawula ama-actuator angu-0…10 V DC kanye/noma ama-24 V AC ashisayo noma ama-actuator avuliwe/avale ngokubuya kwentwasahlobo.
Ukuvumelana nezimo nokuxhumana
I-RC-CDFO ingaxhunywa kusistimu ye-SCADA emaphakathi nge-RS485 (EXOline noma i-Modbus) futhi ilungiselwe uhlelo oluthile kusetshenziswa isofthiwe yokumisa Ithuluzi Lokufaka Isicelo samahhala.
Ukuphatha Isibonisi
Isibonisi sinezinkomba zendawo yokushisisa noma yokupholisa, inkomba yokulinda, izilungiselelo zepharamitha yesevisi, inkomba yokungahlali muntu/yocisha (futhi sibonisa izinga lokushisa), izinga lokushisa lasendlini/ngaphandle, nendawo yokubeka. Isilawuli siphinde sibe nezinkinobho zokuhlala, zokwandisa/zinciphise, nezinkinobho zabalandeli.
Amamodi okulawula
I-RC-CDFO ingalungiselelwa izindlela ezihlukene zokulawula/ukulawula ukulandelana, okuhlanganisa ukushisisa, ukushisisa/ukushisisa, ukufudumeza noma ukupholisa ngokushintsha umsebenzi, ukushisisa/ukupholisa, ukufudumeza/ukupholisa nge-VAV-control kanye nomsebenzi wokunikezela ngempoqo womoya, ukufudumeza/ ukupholisa nge-VAV-control, ukupholisa, ukupholisa/ukupholisa, ukufudumeza/ukushisisa noma ukupholisa ngokushintsha, kanye nokushintsha ngokusebenza kwe-VAV.
Imiyalo yokusetshenziswa komkhiqizo
Ngaphambi kokufaka nokusebenzisa isilawuli segumbi esihlelwe ngaphambilini se-RC-CDFO, sicela ufunde imanuwali yomsebenzisi ngokucophelela bese ulandela imiyalelo enikeziwe.
Ukufakwa
Idizayini ye-modular yohlu lwe-Regio yezilawuli izenza kube lula ukuzifaka nokuzisebenzisa. Ukufaka i-RC-CDFO:
- Beka ipuleti elingezansi elihlukile ukuze ufake izintambo endaweni ngaphambi kokufaka izinto zikagesi.
- Faka isilawuli ngqo odongeni noma ebhokisini lokuxhuma likagesi.
Ukucushwa
I-RC-CDFO ingalungiselelwa uhlelo oluthile kusetshenziswa ithuluzi lesofthiwe yokumisa yamahhala. Amanani epharamitha angashintshwa kusetshenziswa izinkinobho ZOKUKHULISA kanye NE-DECREASE esibonisini sesilawuli futhi aqinisekiswe ngenkinobho yokuba khona. Ukuze uvimbele abasebenzisi abangagunyaziwe ekwenzeni izinguquko kuzilungiselelo, kungenzeka ukuvimba ukusebenza kwenkinobho nokufinyelela kwemenyu yepharamitha.
Amamodi okulawula
I-RC-CDFO ingalungiselelwa izindlela ezihlukene zokulawula/ukulawula ukulandelana. Sicela ubheke imanuwali yomsebenzisi ukuze uthole imiyalelo enemininingwane yokumisa isilawuli sohlelo lwakho lokusebenza oluthile.
Ukusetshenziswa
I-RC-CDFO yakhelwe ukulawula ukushisa nokupholisa kumasistimu wamakhoyili wabalandeli. Ihlanganisa ukuxhumana nge-RS485 (i-Modbus, i-BACnet noma i-EXOline), ukumisa okusheshayo nokulula ngeThuluzi Lohlelo Lokusebenza, ukufakwa kalula, kanye nokulawula kokuvula/ukuvala noma okungu-0…10 V. Isilawuli sinokubonisa okukhanyisiwe kanye nokokufaka kwesitholi sokuhlala, ukuthintana kwewindi, inzwa yokufingqa, noma umsebenzi wokushintsha. Ibuye ibe nenzwa yokushisa yegumbi eyakhelwe ngaphakathi futhi ingaxhunywa kunzwa yangaphandle yegumbi lokushisa, ukushintsha-over, noma ukunikeza umkhawulo wokushisa komoya (PT1000). Isibonisi sinezinkomba zendawo yokushisisa noma yokupholisa, inkomba yokulinda, izilungiselelo zepharamitha yesevisi, inkomba yokungahlali muntu/yokucisha (futhi sibonisa izinga lokushisa), izinga lokushisa lasendlini/ngaphandle, nendawo yokubeka. Isilawuli siphinde sibe nezinkinobho zokuhlala, zokwandisa/zinciphise, nezinkinobho zabalandeli. I-RC-CDFO ingakwazi ukulawula ama-actuator angu-0…10 V DC kanye/noma ama-24 V AC ashisayo noma ama-actuator avuliwe/avale ngokubuya kwentwasahlobo. Sicela ubheke imanuwali yomsebenzisi ukuze uthole imiyalelo enemininingwane yokumisa isilawuli sohlelo lwakho lokusebenza oluthile.
I-RC-CDFO iyisilawuli segumbi esihlelwe ngaphambilini esiphuma kuchungechunge lwe-Regio Midi esihloselwe ukulawula ukushisisa nokupholisa kumasistimu ekhoyili yabalandeli.
I-RC-CDFO
Isilawuli segumbi esihlelwe ngaphambilini esinesibonisi, ukuxhumana nenkinobho yabalandeli
- Ukuxhumana nge-RS485 (Modbus, BACnet noma EXOline)
- Ukucushwa okusheshayo nokulula ngeThuluzi Lohlelo Lokusebenza
- Ukufakwa kalula
- Vula/Vala noma 0…10 V isilawuli
- Isibonisi esikhanyiselwe emuva
- Okokufaka komtshina wokuhlala, ukuthintana kwewindi, inzwa yokujiya noma umsebenzi wokushintsha
- Ukunciphisa izinga lokushisa lomoya
Isicelo
Izilawuli ze-Regio zilungele ukusetshenziswa ezakhiweni ezidinga ukunethezeka okuphelele kanye nokunciphisa ukusetshenziswa kwamandla, njengamahhovisi, izikole, izikhungo zezitolo, izikhumulo zezindiza, amahhotela nezibhedlela njll.
Umsebenzi
I-RC-CDFO isilawuli segumbi ochungechungeni lwe-Regio. Inenkinobho yokulawula abalandeli ngamagiya amathathu (ikhoyili yabalandeli), isibonisi, kanye nokuxhumana nge-RS485 (Modbus, BACnet noma EXOline) ukuze kuhlanganiswe amasistimu.
Inzwa
Isilawuli sinenzwa eyakhelwe ngaphakathi yegumbi lokushisa. Inzwa yangaphandle yezinga lokushisa legumbi, ukushintsha-over noma ukunikeza umkhawulo wokushisa womoya futhi ingaxhunywa (PT1000).
Abapheki
I-RC-CDFO ingakwazi ukulawula ama-actuator angu-0…10 V DC kanye/noma ama-24 V AC ashisayo noma ama-On/Off actuators ngokubuya kwentwasahlobo.
Ukuvumelana nezimo nokuxhumana
I-RC-CDFO ingaxhunywa kusistimu ye-SCADA emaphakathi nge-RS485 (EXOline noma i-Modbus) futhi ilungiselelwe uhlelo lokusebenza oluthile kusetshenziswa i-software yokumisa yamahhala Ithuluzi Lesicelo.
Kulula ukufaka
Idizayini ye-modular, enepuleti elingezansi elihlukile lokufaka izintambo, lenza lonke uhla lwe-Regio lezilawuli lula ukulifaka nokusebenzisa. Ipuleti elingezansi lingafakwa endaweni ngaphambi kokuthi kufakwe izinto zikagesi. Ukukhweza kwenzeka ngqo odongeni noma ebhokisini lokuxhuma ugesi.
Ukuphathwa kwesibonisi
Isibonisi sinezinkomba ezilandelayo:
| 1 | Umlandeli |
| 2 | Inkomba yokuzenzakalela/yezandla yefeni |
| 3 | Isivinini sabalandeli samanje (0, 1 ,2, 3) |
| 4 | Ukungenisa umoya okuphoqelelwe |
| 5 | Inani elishintshekayo |
| 6 | Inkomba yokuhlala |
| 7 | Izinga lokushisa lamanje legumbi ku-°C ukuya endaweni eyodwa yedesimali |
| 8 | Vula iwindi |
| 9 | OKUPHOLA/UKUSHISA: Kubonisa uma iyunithi ilawula ngokuvumelana nendawo yokushisisa noma yokupholisa |
| 10 | I-STANDBY: Inkomba yokulinda, INKONZO: Izilungiselelo zepharamitha |
| 11 | VALIWE: Akunamuntu (futhi kukhombisa izinga lokushisa) noma inkomba Yokucisha (KUVALIWE kuphela) |
| 12 | Izinga lokushisa langaphakathi/Ngaphandle |
| 13 | I-Setpoint |
Izinkinobho ezikusilawuli zinika amandla ukusetha okulula kwamanani epharamitha kusetshenziswa imenyu yepharamitha eboniswe kusibonisi. Amanani epharamitha ashintshwa ngezinkinobho ZOKUKHULA kanye ne-DECREASE futhi izinguquko ziqinisekiswa ngenkinobho Yokuhlala.
| 1 | Inkinobho yokuhlala |
| 2 | Khulisa (∧) kanye nezinkinobho Nciphisa (∨) |
| 3 | Inkinobho yabalandeli |
Ukuze uvimbele abasebenzisi abangagunyaziwe ekwenzeni izinguquko kuzilungiselelo, kungenzeka ukuvimba ukusebenza kwenkinobho. Ukufinyelela kumenyu yepharamitha nakho kungase kuvinjwe.
Lawula izindlela
I-RC-CDFO ingalungiselelwa izindlela ezihlukene zokulawula/ukulawula ukulandelana:
- Ukushisisa
- Ukushisa/Ukushisa
- Ukushisisa noma ukupholisa ngokushintsha umsebenzi
- Ukushisisa/Ukupholisa
- Ukushisisa/Ukupholisa nge-VAV-control kanye nokusebenza komoya okuphoqelelwe
- Ukushisisa/Ukupholisa nge-VAV-control
- Ukupholisa
- Ukupholisa/Ukupholisa
- Ukushisisa/Ukushisisa noma Ukupholisa ngokushintsha-over
- Shintsha ngokusebenza kwe-VAV
Amamodi okusebenza
Kunezinhlobo ezinhlanu ezahlukene zokusebenza: Kuvaliwe, Akunamuntu, Kumile, Kuhlalwe futhi Kudlula. Kusetshenziswe imodi yokusebenza esethiwe. Ingasethwa kokuthi Yima kusetshenziswa imenyu yepharamitha kusibonisi. Amamodi okusebenza angenziwa asebenze ngomyalo ophakathi, umtshina wokuhlala noma inkinobho ethi Occupancy.
Valiwe: Ukushisisa nokupholisa kunqanyuliwe. Nokho, ukuvikela isithwathwa kusasebenza (ukusethwa kwefekthri (FS))=8°C). Le modi iyasebenza uma iwindi livuliwe.
Akuhlalwa muntu: Igumbi lapho isilawuli sibekwe khona alisetshenziswa isikhathi eside, njengamaholide noma izimpelaviki ezinde. Kokubili ukushisisa nokupholisa kugcinwa ngaphakathi kwesikhawu sezinga lokushisa elinamazinga okushisa amaminithi alungisekayo/aphezulu (FS min=15°C, max=30°C).
Hlala ULINDILE: Igumbi likumodi yokonga amandla futhi alisetshenziswa okwamanje. Lokhu kungaba, isibonelo, phakathi nobusuku, izimpelasonto nakusihlwa. Isilawuli simi eduze ukuze sishintshe imodi yokusebenza ibe ngu-Occupied uma kutholwa ubukhona. Kokubili ukushisisa nokupholisa kugcinwa ngaphakathi kwesikhawu sezinga lokushisa okulungisekayo okungama-min/max okushisa (FS min=15°C, max=30°C).
Kumatasa: Igumbi liyasetshenziswa futhi imodi yokunethezeka ivuliwe. Isilawuli sigcina izinga lokushisa eduze kwendawo yokushisisa (FS=22°C) kanye nendawo yokupholisa (FS=24°C).
Ukudlula: Izinga lokushisa ekamelweni lilawulwa ngendlela efanayo nemodi yokusebenza ethi Occupied. Ukukhipha umoya ngempoqo nakho kuyasebenza. Le modi yokusebenza iwusizo ngokwesibonelo emagumbini enkomfa, lapho abantu abaningi bekhona ngesikhathi esisodwa isikhathi esithile. Uma i-Bypass yenziwe yasebenza ngokucindezela inkinobho yokuhlala, isilawuli sizobuyela ngokuzenzakalelayo kumodi yaso yokusebenza esethiwe (Okuthathiwe noma Okulindile) ngemva kokuphela kwesikhathi esilungisekayo (FS=2 amahora). Uma kusetshenziswa umtshina wokuhlala, isilawuli sizobuyela ngokuzenzakalelayo kumodi yayo yokusebenza esethiwe uma kungekho okutholakalayo okukhona imizuzu eyi-10.
Umtshina wokuhlala
Ngokuxhuma umtshina wokuhlala, i-RC-CDFO ingashintsha phakathi kwemodi yokusebenza esethiwe ukuze ibe khona (Bypass noma Occupied) kanye nemodi yayo yokusebenza esethiwe. Ngale ndlela, izinga lokushisa lilawulwa yisidingo, okwenza kube nokwenzeka ukonga amandla ngenkathi kugcinwa izinga lokushisa lisezingeni elithokomele.
Inkinobho yokuhlala
Ukucindezela inkinobho yokuhlala isikhathi esingaphansi kwamasekhondi angu-5 lapho isilawuli sikwimodi yaso yokusebenza esethiwe kuzosibangela ukuthi sishintshele kumodi yokusebenza ethi Bypass. Ukucindezela inkinobho isikhathi esingaphansi kwamasekhondi angu-5 lapho isilawuli sikumodi ye-Bypass kuzoshintsha imodi yaso yokusebenza ibe imodi yokusebenza esethiwe Uma inkinobho yokungena icindezelekile imizuzwana engaphezu kwemi-5 kuzoshintsha imodi yokusebenza yesilawuli ibe “Vala shaqa” (Valiwe/Akunamuntu ) kungakhathaliseki ukuthi iyiphi imodi yayo yokusebenza yamanje. Ithuluzi Lohlelo noma isibonisi sivumela ukukhetha ukuthi iyiphi imodi yokusebenza, Valiwe noma Akunamuntu, okufanele isebenze kokuthi “Cisha” (FS=Akunamuntu). Ukucindezela inkinobho isikhathi esingaphansi kwamasekhondi angu-5 lapho isilawuli sikumodi yokuvala shaqa kuzosibangela ukuthi sibuyele kumodi ye-Bypass.
Ukungenisa umoya okuphoqelelwe
I-Regio inomsebenzi owakhelwe ngaphakathi wokungenisa umoya ngempoqo. Uma imodi yokusebenza yendawo ilungiselelwe lo msebenzi, ukuvala okokufaka komtshina wokuhlala kuzosetha isilawuli kumodi ye-Bypass futhi kwenze kusebenze okukhiphayo ukuze kungene umoya ngempoqo (DO4). Lokhu ngokwesibonelo kungasetshenziswa ukuvula isikhangisoamper. Umsebenzi uyanqanyulwa lapho isikhawu sokuphoqelela esisetablet sesiphelile.
Umsebenzi wokushintsha
I-RC-CDFO inokufakwayo koshintsho olusetha kabusha ngokuzenzakalelayo okuphumayo kwe-UO1 ukuze isebenze nomsebenzi wokushisisa noma wokupholisa. Okokufaka kungaxhunywa kuzinzwa zohlobo lwe-PT1000, inzwa ifakwe ukuze ikwazi ukuzwa izinga lokushisa lepayipi lokuhambisa ikhoyili. Uma nje i-valve yokushisisa isavuleke ngaphezu kuka-20 %, noma isikhathi ngasinye lapho kwenziwa umsebenzi we-valve, kubalwa umehluko phakathi kwemidiya negumbi lokushisa. Imodi yokulawula ibe isishintshwa ngokusekelwe kumehluko wezinga lokushisa. Uma ukhetha, othintana naye ongase abe mahhala angasetshenziswa. Lapho othintana naye evuliwe, isilawuli sizosebenza sisebenzisa umsebenzi wokushisa, futhi lapho sivaliwe sisebenzisa umsebenzi wokupholisa.
Ukulawulwa kwe-heater kagesi
Amamodeli anikeza ukusebenza kwabalandeli anomsebenzi wokulawula ikhoyili yokushisisa ku-UO1 ngokulandelana nokushintsha ku-UO2. Ukuze uvule lo msebenzi, ipharamitha 11 isetshenziselwa ukusetha imodi yokulawula "Ukushisa/Ukushisisa noma Ukupholisa ngokushintsha". Umsebenzi wokushintsha uzobe ususetshenziselwa ukushintsha phakathi kwemodi yasehlobo neyasebusika. I-UO2 izosetshenziswa njenge-actuator epholile kumodi yasehlobo nanjenge-actuator yokushisisa kumodi yasebusika. Uma ikumodi yasehlobo, i-RC-CDFO isebenza njengesilawuli sokushisisa/ukupholisa nalapho ikumodi yasebusika njengesilawuli sokushisisa/sokushisa. I-UO2 izoqalisa kuqala, ilandelwe yi-UO1 (ikhoyili yokushisa).
Ikhoyili yokufudumeza exhunywe ku-UO1 izosebenza kuphela uma ikhoyili eku-UO2 ingakwazi ukufeza izidingo zokufudumeza ngokwayo.
Qaphela ukuthi i-Regio ayinakho okokufaka ukuqapha isimo sabalandeli noma ukushisisa ngokweqile kwekhoyili yokushisisa. Le misebenzi kufanele inikezwe uhlelo lwe-SCADA.
Ukulungiswa kwe-Setpoint
Uma ikwimodi Ithathiwe, isilawuli sisebenza sisebenzisa indawo yokushisisa (FS=22°C) noma indawo yokupholisa (FS=24° C) engashintshwa kusetshenziswa izinkinobho zokuthi INNCREASE kanye ne-DECREASE. Ukucindezela okuthi KHUZA kuzonyusa indawo yokusetha yamanje ngo-0.5°C ukucindezela ngakunye kuze kufinyelelwe umkhawulo ophezulu we-offset (FI=+3°C). Ukucindezela okuthi DECREASE kuzonciphisa indawo yokubeka yamanje ngo-0.5°C ukucindezela ngakunye kuze kube yilapho sekufinyelelwe khona umkhawulo omkhulu (FI=-3°C). Ukushintsha phakathi kwezindawo zokushisisa nokupholisa kwenzeka ngokuzenzakalelayo kusilawuli kuye ngezimfuneko zokushisisa noma zokupholisa.
Imisebenzi yokuphepha eyakhelwe ngaphakathi
I-RC-CDFO inokokufaka kwenzwa yokujiya ukuze ithole ukunqwabelana komswakama. Uma kutholwa, isifunda sokupholisa sizomiswa. Isilawuli siphinde sibe nokuvikela isithwathwa. Lokhu kuvimbela ukulimala kwesithwathwa ngokuqinisekisa ukuthi izinga lokushisa alehli libe ngaphansi kuka-8°C lapho isilawuli sikwimodi Valiwe.
Ukunciphisa izinga lokushisa lomoya
I-AI1 ingalungiselelwa ukusetshenziswa nenzwa yokunciphisa izinga lokushisa lomoya. Isilawuli segumbi sizobe sesisebenza kanye nesilawuli sezinga lokushisa lomoya esinikezelayo sisebenzisa isilawuli se-cascade, okuholela ekunikezeni izinga lokushisa elibaliwe eligcina izinga lokushisa legumbi. Kungenzeka ukusetha izindawo zokukhawulelwa ngamaminithi angawodwana/ubukhulu bokushisisa nokupholisa. Ibanga lokushisa elihlelekayo: 10–50°C.
Umsebenzi we-Actuator
Wonke ama-actuator asetshenziswa, kungakhathaliseki uhlobo noma imodeli. Ukuzivivinya kwenzeka ngezikhathi ezithile, kusethwa ngamahora (FS=23 amahora isikhawu). Isignali yokuvula ithunyelwa ku-actuator isikhathi eside njengesikhathi sayo sokusebenza esimisiwe. Isignali yokuvala ibe isithunyelwa isikhathi esilinganayo, ngemva kwalokho umsebenzi uyaqedwa. Umsebenzi we-actuator uyacishwa uma isikhawu sisethelwe ku-0.
Ukulawula abalandeli
I-RC-CDFO inenkinobho yabalandeli esetshenziselwa ukusetha isivinini sabalandeli. Ukucindezela inkinobho yabalandeli kuzobangela ukuthi ifeni isuke esivinini sayo samanje iye kwesilandelayo.
Isilawuli sinezindawo ezilandelayo:
| Okuzenzakalelayo | Ukulawula okuzenzakalelayo kwesivinini sefeni ukugcina izinga lokushisa elifiswayo legumbi |
| 0 | Vala mathupha |
| I | Ukuma okwenziwa ngesandla ngesivinini esiphansi |
| II | Ukuma okwenziwa ngesandla ngesivinini esimaphakathi |
| III | Ukuma okwenziwa ngesandla ngesivinini esikhulu |
Kumamodi okusebenza Kuvaliwe futhi Akunamuntu, isiphephetha-moya siyamiswa kungakhathaliseki ukuthi isibonisi sinjani. Ukulawulwa kwabalandeli okwenziwa ngesandla kungavinjwa uma kuthanda.
Umsebenzi wokuthuthukisa abalandeli
Uma kunomehluko omkhulu phakathi kwendawo yokubeka igumbi nezinga lokushisa lamanje legumbi, noma uma nje umuntu efisa ukuzwa i-fan iqala, umsebenzi we-boost ungavulwa ukuze wenze ifeni igijime ngesivinini esiphezulu isikhathi esifushane sokuqalisa.
Isiqalo sabalandeli
Uma usebenzisa abalandeli be-EC abonga amandla namuhla, kuhlale kunengozi ukuthi ifeni ngeke iqale ngenxa yevolthi yokulawula ephansi.tage ukuvimbela ifeni ukuthi idlule itorque yayo yokuqala. I-fan izohlala imile ngenkathi amandla esageleza kuyo, okungase kudale umonakalo. Ukuze uvimbele lokhu, umsebenzi wokuqalisa kwefeni ungavulwa. Okuphumayo kwefeni kuzobe sekusethelwa ku-100 % ngesikhathi esimisiwe (1…10 s) lapho ifeni isethwe ukuthi isebenze ngesivinini sayo esiphansi kakhulu uma iqala endaweni yokucisha. Ngale ndlela, i-torque yokuqala idlula. Ngemuva kokuthi isikhathi esibekiwe sesidlulile, ifeni izobuyela esivinini sayo sokuqala.
Imojula yokudlulisa, RB3
I-RB3 iyimojula edluliswayo enama-relay amathathu okulawula abalandeli ezinhlelweni zamakhoyili wabalandeli. Kuhloswe ukuthi kusetshenziswe kanye nezilawuli zemodeli ze-RC-...F… ezivela ebangeni le-Regio. Ukuze uthole ulwazi olwengeziwe, bheka umyalelo we-RB3.
Ukucushwa nokugadwa kusetshenziswa Ithuluzi Lokusebenza
I-RC-CDFO ihlelwa ngaphambilini lapho ilethwa kodwa ingalungiselelwa kusetshenziswa Ithuluzi Lokusebenza. I-Application Tool wuhlelo olusekelwe ku-PC elenza kube nokwenzeka ukulungisa nokwengamela ukufakwa kanye nokushintsha izilungiselelo kusetshenziswa isixhumi esibonakalayo somsebenzisi esibanzi. Uhlelo lungalandwa mahhala kwa-Regin webindawo www.regincontrols.com.
Idatha yobuchwepheshe
| Ukunikezwa kwevoltage | 18…30 V AC, 50…60 Hz |
| Ukusetshenziswa kwangaphakathi | 2.5 VA |
| Izinga lokushisa le-ambient | 0…50°C |
| Izinga lokushisa lesitoreji | -20…+70°C |
| Umswakama we-ambient | Ubukhulu 90% RH |
| Isigaba sokuvikela | IP20 |
| Ukuxhumana | I-RS485 (i-EXOline noma i-Modbus enokutholwa okuzenzakalelayo/ukushintsha, noma i-BACnet |
| I-modbus | 8 bits, 1 noma 2 stop bits. Okuyinqaba, ngisho (FS) noma akukho ukulinganiswa |
| I-BACnet | I-MS/TP |
| Isivinini sokuxhumana | 9600, 19200, 38400 bps (EXOline, Modbus ne-BACnet) noma 76800 bps (BACnet kuphela) |
| Bonisa | I-LCD ekhanyayo |
| Impahla, i-casing | I-Polycarbonate, i-PC |
| Isisindo | 110g |
| Umbala | Isiginali emhlophe RAL 9003 |
Lo mkhiqizo unophawu lwe-CE. Ulwazi olwengeziwe luyatholakala ku www.regincontrols.com.
Okokufaka
| Inzwa yegumbi yangaphandle noma inzwa yokunciphisa izinga lokushisa lomoya | Inzwa ye-PT1000, 0…50°C. Izinzwa ezifanele i-Regin's TG-R5/PT1000, TG-UH3/PT1000 kanye ne-TG-A1/PT1000 |
| Ukushintsha kwe-alt. othintana naye ongaba mahhala | Inzwa ye-PT1000, 0…100°C. Inzwa efanelekile yi-Regin's TG-A1/PT1000 |
| Umtshina wokuhlala | Ivala othintana naye ongaba mahhala. Umtshina wokuhlala ofanelekayo yi-IR24-P yakwa-Regin |
| Inzwa yokujiya, othintana naye ewindini | Inzwa ye-Regin's condensation KG-A/1 resp. othintana naye ongaba mahhala |
Imiphumela
| I-actuator ye-valve (0…10 V), alt. i-actuator eshisayo (Vula/Vala i-pulsing) noma i-On/Off actuator (UO1, UO2) | 2 imiphumela | |
| Ama-valve actuators | 0…10 V, ubuningi. 5 mA | |
| I-Actuator eshisayo | 24 V AC, ubuningi. 2.0 A (isignali yokuphuma kwe-pulse ehambisana nesikhathi) | |
| Vula/Vala i-actuator | 24 V AC, ubuningi. 2.0 A | |
| Okukhiphayo | Ukushisisa, ukupholisa noma i-VAV (dampisiza) | |
| Ukulawula abalandeli | 3 imiphumela yesivinini I, II kanye ne-III ngokulandelanayo, 24 V AC, max 0.5 A | |
| Ukungenisa umoya okuphoqelelwe | 24 V AC actuator, ubuningi 0.5 A | |
| Ukuzivocavoca | FS=23 amahora isikhawu | |
| Amabhulokhi wetheminali | Uhlobo lokuphakamisa lwekhebula elikhulu eliphambanayo 2.1 mm2 | |
Izilungiselelo zephoyinti ngeThuluzi Lohlelo noma ngokuboniswa
| Indawo yokushisa eyisisekelo | 5…40°C |
| Indawo yokupholisa eyisisekelo | 5…50°C |
| I-Setpoint displacement | ±0…10°C (FI=±3°C) |
Ubukhulu
Izintambo
| Isikhumulo | Ukuqokwa | Umsebenzi |
| 10 | G | Ukunikezwa kwevoltage24V AC |
| 11 | G0 | Ukunikezwa kwevoltage 0v |
| 12 | DO1 | Okukhiphayo kokulawula abalandeli I |
| 13 | DO2 | Okukhiphayo kokulawula abalandeli II |
| 14 | DO3 | Okukhiphayo kokulawula abalandeli III |
| 20 | GMO | I-24 V AC evamile ku-DO |
| 21 | G0 | 0 V okuvamile ku-UO (uma usebenzisa ama-activator angu-0…10 V) |
| 22 | DO4 | Okukhipha umoya ngempoqo |
| 23 | UO1 | Okukhiphayo kwe-0…10 V valve actuator alt. i-actuator eshisayo noma i-On/Off. Ukushisisa (FS) Ukupholisa noma Ukushisisa noma Ukupholisa ngokushintsha-over. |
| 24 | UO2 | Okukhiphayo kwe-0…10 V valve actuator alt. i-actuator eshisayo noma i-On/Off. Ukushisisa, Ukupholisa (FS) noma Ukushisisa noma Ukupholisa ngokushintsha-over |
| 30 | I-AI1 | Okokufaka kwedivayisi yokusetha yangaphandle, okunye. inzwa yokunciphisa izinga lokushisa lomoya |
| 31 | UI1 | Okokufaka kwenzwa yokushintsha, alt. othintana naye ongaba mahhala |
| 32 | DI1 | Okokufaka komtshina wokuhlala, alt. othintana naye ngewindi |
| 33 | I-DI2/CI | Okokufaka kwenzwa ye-Regin's condensation KG-A/1 alt. shintsha iwindi |
| 40 | +C | I-24 V DC evamile ku-UI ne-DI |
| 41 | AGnd | Indawo ye-analogue |
| 42 | A | RS485-ukuxhumana A |
| 43 | B | I-RS485-ukuxhumana B |
Amadokhumenti
Wonke amadokhumenti angalandwa kusuka www.regincontrols.com.
IHHOVISI ESWEDEN
- Ucingo: +46 31 720 02 00
- Web: www.regincontrols.com
- I-imeyili: info@regincontrols.com
Amadokhumenti / Izinsiza
 |
BUYISA I-RC-CDFO Isilawuli Segumbi Esihlelwe Ngaphambili Esinokuxhumana Kwezibonisi kanye Nenkinobho Yabalandeli [pdf] Incwadi Yomnikazi I-RC-CDFO, RC-CDFO Pre Programmed Room Controller with Display Communication and Fan Button, RC-CDFO Pre Programmed Room Controller, RC-CDFO, Pre Programmed Room Controller with Display Communication and Fan Button, Pre Programmed Room Controller, Room Controller, Controller |
