I-T-Format Interface v1.1 Umhlahlandlela Womsebenzisi
Isingeniso (Buza Umbuzo)
I-IP yesixhumi esibonakalayo ye-T-Format yakhelwe ukuhlinzeka ngokuxhumana ukuze ama-FPGA axhumane nemithetho ehlukahlukene. UTamagawa imikhiqizo efana nezishumeki ezijikelezayo.
Isifinyezo (Buza Umbuzo)
Ithebula elilandelayo linikeza isifinyezo sezici zesixhumi esibonakalayo se-T-Format.
Ithebula 1. Izici ze-T-Format Interface
| Inguqulo ye-Core | Lo mbhalo usebenza ku-T-Format Interface v1.1. |
| Idivayisi Esekelwe Imindeni |
|
| Isekelwe Ithuluzi Ukugeleza | Idinga i-Libero® SoC v11.8 noma ukukhishwa kwakamuva. |
| Ilayisensi | Ikhodi ye-RTL ebethelwe ephelele inikezwe okubalulekile, okwenza ukuthi umgogodla uqiniswe nge-SmartDesign. Ukulingisa, ukuhlanganiswa, kanye nesakhiwo kwenziwa ngesofthiwe ye-Libero. I-T-Format Interface inelayisensi ene-RTL ebethelwe okufanele ithengwe ngokuhlukana. Ukuze uthole ukwaziswa okwengeziwe, bheka I-T-Format Interface. |
Izici (Buza umbuzo)
I-T-Format Interface inezici ezibalulekile ezilandelayo:
- Idlulisa futhi yamukele idatha ye-serial kusukela kusendlalelo esibonakalayo (i-RS-485 interface)
- Qondanisa idatha njenge-T-Format ngayinye futhi inikeza le datha njengamarejista afundwa amabhulokhi alandelayo
- Ukuhlola amaphutha, afana nokulingana, ukungafani kokuhlolwa kwe-Cyclic Redundancy (CRC), amaphutha okudlulisa, nokunye, kubikwa idivayisi yangaphandle.
- Inikeza umsebenzi we-alamu ocushwayo uma inani lephutha leqa umkhawulo omisiwe
- Ihlinzeka ngezimbobo zebhulokhi ye-CRC yangaphandle ukuze umsebenzisi alungise i-CRC polynomial uma kudingeka.
Ukusetshenziswa kwe-IP Core ku-Libero Design Suite (Buza umbuzo)
I-IP core kufanele ifakwe kukhathalogi ye-IP yesofthiwe ye-Libero SoC. Lokhu kwenziwa ngokuzenzakalelayo ngomsebenzi wokubuyekeza Ikhathalogi ye-IP kusofthiwe ye-Libero SoC, noma umongo we-IP ulandwa mathupha kukhathalogi. Uma i-IP core isifakiwe kukhathalogi ye-IP yesofthiwe ye-Libero SoC, umongo uyalungiswa, ukhiqizwe, futhi uqiniswe ngaphakathi kwethuluzi le-Smart Design ukuze lifakwe ohlwini lwephrojekthi ye-Libero.
Ukusetshenziswa Kwedivayisi kanye nokusebenza (Buza umbuzo)
Ithebula elilandelayo libonisa ukusetshenziswa kwedivaysi esetshenziselwa i-T-Format Interface.
Ithebula 2. Ukusetshenziswa kwe-T-Format Interface
| Imininingwane Yedivayisi | Izinsiza | Ukusebenza (MHz) | Ama-RAM | Izivimbela zezibalo | I-Chip Globals | |||
| Umndeni | Idivayisi | Ama-LUT | I-DFF | I-LSRAM | μSRAM | |||
| I-PolarFire® SoC | I-MPFS250T | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
| I-PolarFire | I-MPF300T | 236 | 256 | 200 | 0 | 0 | 0 | 0 |
| I-SmartFusion® 2 | I-M2S150 | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
Okubalulekile:
idatha yakhe kuleli thebula ithathwa kusetshenziswa izilungiselelo ezijwayelekile zokuhlanganisa nesakhiwo. Umthombo wewashi lereferensi le-CDR wawumiswe kokuthi Unikezelwe namanye amanani wokumisa engashintshiwe.- Iwashi liboshelwe ku-200 MHz ngenkathi isebenzisa ukuhlaziya isikhathi ukuze kuzuzwe izinombolo zokusebenza.
Incazelo Esebenzayo (Buza umbuzo)
Lesi sigaba sichaza imininingwane yokusetshenziswa kwe-T-Format Interface.
Umfanekiso olandelayo ubonisa umdwebo webhulokhi wezinga eliphezulu le-T-Format Interface.
Umfanekiso 1-1. Umdwebo Webhulokhi Yezinga eliphezulu le-T-Format Interface IP
Ukuze uthole imininingwane ephelele nge-T-Format, bheka UTamagawa amadokhumenti. Ithebula elilandelayo libonisa imiyalo ehlukahlukene esetshenziselwa ukucela idatha kusuka kudivayisi yangaphandle nemisebenzi yayo, kanye nenani lezinkambu zedatha ezibuyisiwe ngomyalo ngamunye.
Ithebula 1-1. Imiyalo Yenkambu Yokulawula
| I-ID yomyalo | Umsebenzi | Inombolo Yezinkambu Zedatha Kuzimele Owamukelwe |
| 0 | I-Rotor Angle (Idatha Ifundiwe) | 3 |
| 1 | Idatha ye-Multiturn (Idatha Ifundiwe) | 3 |
| 2 | I-ID yesifaki khodi (Idatha Ifundiwe) | 1 |
| 3 | I-Rotor Angle kanye nedatha ye-Multiturn (Idatha Ifundiwe) | 8 |
| 7 | Setha kabusha | 3 |
| 8 | Setha kabusha | 3 |
| C | Setha kabusha | 3 |
Isibalo esilandelayo sibonisa umdwebo webhulokhi yezinga lesistimu ye-T-Format Interface.
Umfanekiso 1-2. I-System-Level Block Diagram ye-T-Format Interface
Umfanekiso olandelayo ubonisa umdwebo webhulokhi osebenzayo we-T-Format interface.
Umfanekiso 1-3. I-Functional Block Diagram ye-T-Format Interface IP
Ukwenziwa ngakunye kokuxhumana ku-T-Format kuqala ngokudluliswa kwe-Control Frame (CF) kusuka kumceli, kulandelwe ifremu etholwe ocingweni lwangaphandle. Ibhulokhi ye-TF Transmitter ikhiqiza idatha ye-serial ezothunyelwa kudivayisi yangaphandle. Iphinde ikhiqize isiginali ye-tx_en_o yokuzithandela edingwa ezinye iziguquli ze-RS-485. Isifaki khodi sithola idatha edlulisiwe, futhi sidlulisela uhlaka lwedatha ye-serial ku-IP, etholwa ku-rx_i port yokufaka yebhulokhi ye-IP. Ibhulokhi ye-TF_CF_DET ithola kuqala inkambu yokulawula futhi ihlonze inani le-ID. Ubude bedatha bunqunywa ngokusekelwe kunani le-ID etholiwe, futhi izinkambu ezilandelayo zitholwa futhi zigcinwe kumarejista ahlukahlukene kusetshenziswa ibhulokhi ye-TF_DATA_READ. Ngemva kokugcinwa kwedatha ephelele, idatha kuzo zonke izinkambu ngaphandle kwenkambu ye-CRC ithunyelwa kubhulokhi yangaphandle ye-CRC generator, futhi i-CRC ebaliwe ekhiqizwe yile bhulokhi iqhathaniswa ne-CRC eyamukelwe. Amanye amaphutha nawo ayahlolwa, futhi isignali ethi done_o iyagonyelwa ('1' kumjikelezo owodwa we-sys_clk_i) ngemva kwawo wonke amaphutha okuthenga angenawo.
1.1 Ukuphatha Iphutha (Buza umbuzo)
Ibhulokhi ikhomba amaphutha alandelayo:
- Iphutha lokulinganisa endaweni yokulawula etholiwe
- Ukulandelana kwesiqalo esibi kunkambu yokulawula eyamukelwe
- Umlayezo ongaphelele lapho ulayini we-RX unamathele ku-0 noma unamathele ku-1
- Ukungafani kwe-CRC phakathi kwedatha kunkambu ye-CRC eyamukelwe, kanye ne-CRC ebaliwe
- Dlulisa amaphutha njengephutha lokulinganisa noma iphutha le-delimiter ku-CF edlulisiwe, njengoba ifundwa kubhithi 6 kanye nebhithi 7 yenkambu yesimo (bona UTamagawa ishidi le-data).
Lawa maphutha, lapho ekhonjwa ibhulokhi, aholela ekukhuleni kwekhawunta yamaphutha. Uma inani le-counter counter value lidlula inani elimisiwe (elilungiselelwe kusetshenziswa i-g_FAULT_THRESHOLD), okukhiphayo kwe-alamu_o kuyagonyelwa.
Okuphumayo kwe-alamu kuyasuswa uma okokufaka kwe-alamu_clr_i kuphezulu ngesikhathi esisodwa se-sys_clk_i. Isiginali ethi tf_error_o isetshenziselwa ukubonisa uhlobo lwephutha eyenzekile. Le datha isethwe kabusha ukuze ithi 0, lapho okwenziwayo okulandelayo kuqala (start_i is
'1').
Ithebula elilandelayo lichaza amaphutha ahlukahlukene kanye nendawo yawo yebhithi ehambelanayo kurejista ye-tf_error_o.
Ithebula 1-2. terror Register Incazelo
| Kancane | Umsebenzi |
| 5 | Iphutha le-delimiter ye-TX - njengoba kukhonjisiwe ku-bit 7 yenkambu yesimo |
| 4 | Iphutha le-TX parity - njengoba kukhonjisiwe ku-bit 6 yenkambu yesimo |
| 3 | Ukungafani kwe-CRC phakathi kwenkambu ye-CRC etholwe kusigqila nedatha ye-CRC ebaliwe |
| 2 | Umlayezo ongaphelele - iphutha le-delimiter eliholela ekuphelelweni kwesikhathi |
| 1 | Ukulandelana kwesiqalo esibi endaweni yokulawula eyamukelwe - "0010" ayitholwanga ngaphambi kokuphela kwesikhathi |
| 0 | Iphutha le-Parity kunkambu yokulawula etholiwe |
Amapharamitha we-T-Format Interface kanye namasignali e-interface (Buza umbuzo)
Lesi sigaba sidingida amapharamitha kusilungiselelo se-T-Format Interface GUI kanye namasiginali we-I/O.
2.1 Izilungiselelo zokumisa(Buza umbuzo)
Ithebula elilandelayo libala incazelo yemingcele yokumisa esetshenziswe ekusetshenzisweni kwezingxenyekazi zekhompuyutha ze-T-Format Interface. Lawa amapharamitha ajwayelekile futhi ayahluka ngokwesidingo sohlelo lokusebenza.
Ithebula 2-1. Ipharamitha yokucushwa
| Igama Lesignali | Incazelo |
| g_TIMEOUT_TIME | Ichaza isikhathi sokuvala phakathi kwezinkambu ezilandelanayo kuhlaka lokuphindaphinda kwenkathi ye-sys_clk_i. |
| g_FAULT_THRESHOLD | Ichaza inani lephutha - alarm_o igonyelwa lapho isibali sephutha sidlula leli nani. |
2.2 Okokufaka kanye Nezimpawu Zemiphumela (Buza umbuzo)
Ithebula elilandelayo libonisa izimbobo zokufaka neziphumayo ze-T-Format Interface.
Ithebula 2-2. Okokufaka kanye Nemiphumela ye-T-Format Interface
| Igama Lesignali | Isiqondiso | Incazelo |
| setha kabusha_i | Okokufaka | Isignali yokusetha kabusha ephansi esebenzayo ukuze idizayinwe |
| sys_clk_i | Okokufaka | Iwashi Lesistimu |
| ref_clk_i | Okokufaka | Iwashi eliyinkomba, 2.5MHz* |
| qala_i | Okokufaka | I-Startsignal ukuqalisa umsebenzi we-T-Format – kufanele ibe ngu-'1' kumjikelezo owodwa we-sys_clk_i |
| i-alamu_clr_i | Okokufaka | Isignali ye-cleararm – kumele ibe ngu-'1' kumjikelezo owodwa we-sys_clk_i |
| rx_i | Okokufaka | Okokufaka kwedatha ye-serial kusuka kusifaki khodi |
| crc_kwenziwe_i | Okokufaka | Kwenziwe kusuka kubhulokhi ye-CRC yangaphandle -kumele kube ngu-'1' kumjikelezo owodwa we-sys_clk_i |
| cmd_i | Okokufaka | I-ControlField ID izothunyelwa kusifaki khodi |
| crc_calc_i | Okokufaka | Ibhulokhi le-Outputof CRC Generator elinamabhithi ahlehlisiwe, okungukuthi, crc_gen(7) -> crc_calc_i (0), crc_gen(6)-> crc_calc_i(1), .. crc_gen(0)-> crc_calc_i(7) |
| tx_o | Okukhiphayo | Idatha ye-serial okukhiphayo kusifaki khodi |
| tx_zu_o | Okukhiphayo | Dlulisa isignali yokuvumela - iya phezulu uma ukudluliswa kuqhubeka |
| kwenziwe_o | Okukhiphayo | Isignali eyenziwe ngokwenziwe – kugonyelwa njengokushaya kwenhliziyo enobubanzi bomjikelezo owodwa we-sys_clk_i |
| i-alamu_o | Okukhiphayo | Isignali ye-alamu – iyagonyelwa uma inani lezehlakalo lilingana nenani lomkhawulo elimiswe ku-g_FAULT_THRESHOLD |
| qala_crc_o | Okukhiphayo | Isiginali yokuqala yebhulokhi yokukhiqiza ye-CRC |
| idatha_crc_o | Okukhiphayo | I-Datafor CRC generation block - idatha inikezwa njenge: {CF, SF, D0, D1, D2, .. D7} ngaphandle kwemingcele. Esimeni semilayezo emifushane (lapho i-D0-D2 kuphela enedatha), ezinye izinkambu D3-D7 zithathwa njengo-0 |
| tf_error_o | Okukhiphayo | Irejista yephutha ye-TF |
| Ngiyavuma | Okukhiphayo | Inani le-ID elivela kunkambu yokulawula kuhlaka olwamukelwe* |
| sf_o | Okukhiphayo | Inkambu yesimo kuhlaka olwamukelwe* |
| d0_o | Okukhiphayo | Inkundla ye-D0 kuhlaka olwamukelwe* |
| d1_o | Okukhiphayo | Inkundla ye-D1 kuhlaka olwamukelwe* |
| d2_o | Okukhiphayo | Inkundla ye-D2 kuhlaka olwamukelwe* |
| d3_o | Okukhiphayo | Inkundla ye-D3 kuhlaka olwamukelwe* |
| d4_o | Okukhiphayo | Inkundla ye-D4 kuhlaka olwamukelwe* |
| d5_o | Okukhiphayo | Inkundla ye-D5 kuhlaka olwamukelwe* |
| d6_o | Okukhiphayo | Inkundla ye-D6 kuhlaka olwamukelwe* |
| d7_o | Okukhiphayo | Inkundla ye-D7 kuhlaka olwamukelwe* |
| crc_o | Okukhiphayo | Inkambu ye-CRC kuhlaka olwamukelwe* |
Qaphela: Ukuze uthole ukwaziswa okwengeziwe, bheka i- UTamagawa ishidi le-data.
Imidwebo Yesikhathi (Buza umbuzo)
Lesi sigaba sidingida imidwebo yesikhathi ye-T-Format Interface.
Isibalo esilandelayo sibonisa umsebenzi ojwayelekile we-T-Format. Isiginali ye-done_o ikhiqizwa ekugcineni kwakho konke okwenziwayo okungenaphutha, futhi isignali ye-tf_error_o ihlala ku-0.
Umfanekiso 3-1. Umdwebo Wesikhathi - Ukuthengiselana Okujwayelekile
Isibalo esilandelayo sibonisa umsebenzi we-T-Format onephutha le-CRC. Isiginali ethi done_o ayikhiqizwa, futhi isignali ye-tf_error_o ingu-8, okubonisa ukuthi ukungafani kwe-CRC kwenzekile. Isiginali ethi done_o iyakhiqizwa uma okwenziwayo okulandelayo kungenalo iphutha.
Umfanekiso 3-2. Umdwebo Wesikhathi - Iphutha le-CRC
I-Testbench (Buza umbuzo)
Ibhentshi lokuhlola elihlanganisiwe lisetshenziselwa ukuqinisekisa nokuhlola i-T-Format Interface ebizwa ngokuthi ibhentshi lokuhlola lomsebenzisi. I-Testbench ihlinzekelwe ukuhlola ukusebenza kwe-T-Format Interface IP.
4.1 Ukulingisa (Buza umbuzo)
Izinyathelo ezilandelayo zichaza indlela yokulingisa umongo usebenzisa i-testbench:
- Vula uhlelo lokusebenza lwe-Libero SoC, chofoza ithebhu yekhathalogi ye-Libero SoC, wandise i-Solutions-MotorControl
- Chofoza kabili i-T-Format Interface, bese uchofoza okuthi KULUNGILE. Amadokhumenti ahlotshaniswa ne-IP afakwe ohlwini ngaphansi kokuthi Amadokhumenti.
Okubalulekile: Uma ungayiboni ithebhu Yekhathalogi, zulazulela ku View Imenyu yeWindows bese uchofoza Ikhathalogi ukuze uyenze ibonakale.
Umfanekiso 4-1. I-T-Format Interface IP Core kukhathalogi ye-Libero SoC
- Kuthebhu ethi I-Stimulus Hierarchy, chofoza kwesokudla ibhentshi le-test ( t_format_interface_tb.v), khomba kokuthi Lingisa Idizayini Yangaphambili Ye-Synth, bese uchofoza okuthi Vula Ngokusebenzisana.
Okubalulekile: Uma ungayiboni ithebhu ye-Stimulus Hierarchy, zulazula uye ku View > Imenyu yeWindows bese uchofoza I-Stimulus Hierarchy ukuze uyenze ibonakale.
Umfanekiso 4-2. Idizayini yokulingisa yangaphambi kokwenziwa
I-ModelSim ivula nge-testbench file njengoba kuboniswe emfanekisweni olandelayo.
Umfanekiso 4-3. Iwindi lokulingisa le-ModelSim
Okubalulekile: Uma ukulingisa kuphazamiseka ngenxa yomkhawulo wesikhathi sokusebenza oshiwo ku-.do file, sebenzisa umyalo we-run -all ukuze uqedele ukulingisa.
Umlando Wokubuyekeza (Buza umbuzo)
Umlando wokubuyekeza uchaza izinguquko ezisetshenziswe kudokhumenti. Izinguquko zifakwe ohlwini ngokubukeza, kuqala ngokushicilelwa kwamanje.
Ithebula 5-1. Umlando Wokubuyekeza
| Buyekeza | Usuku | Incazelo |
| A | 02/2023 | Okulandelayo uhlu lwezinguquko ekubuyekezweni A kwedokhumenti: • Ithuthe idokhumenti kusifanekiso se-Microchip. • Ibuyekeze inombolo yedokhumenti yaba i-DS50003503A isuka kokuthi 50200812. • Kwengezwe 3. Imidwebo Yesikhathi. • Kwengezwe 4. I-Testbench. |
| 1.0 | 02/2018 | Ukubuyekezwa 1.0 kwaba ukushicilelwa kokuqala kwalo mbhalo. |
Ukusekelwa kwe-Microchip FPGA (Buza umbuzo)
Iqembu lemikhiqizo ye-Microchip FPGA lisekela imikhiqizo yalo ngezinkonzo ezehlukene zokusekela, okuhlanganisa Isevisi Yamakhasimende, Isikhungo Sokusekela Ubuchwepheshe Bekhasimende, a webindawo, kanye namahhovisi okuthengisa emhlabeni wonke. Amakhasimende aphakanyiswa ukuthi avakashele izinsiza ze-inthanethi ze-Microchip ngaphambi kokuxhumana nosekelo njengoba kungenzeka ukuthi imibuzo yawo isiphenduliwe.
Xhumana Nesikhungo Sosizo Lobuchwepheshe ngokusebenzisa i webindawo ku www.microchip.com/support. Yisho inombolo Yengxenye Yedivayisi ye-FPGA, khetha isigaba samacala afanelekile, bese ulayisha idizayini files ngenkathi udala ikesi lokusekela lobuchwepheshe.
Xhumana Nesevisi Yekhasimende ukuze uthole ukwesekwa kwemikhiqizo okungeyona eyobuchwepheshe, njengentengo yomkhiqizo, ukuthuthukiswa komkhiqizo, ulwazi lokubuyekeza, isimo soku-oda, nokugunyazwa.
- Ukusuka eNyakatho Melika, shayela u-800.262.1060
- Kuwo wonke umhlaba, shayela ku-650.318.4460
- Ifeksi, noma yikuphi emhlabeni, 650.318.8044
Ulwazi lwe-Microchip (Buza umbuzo)
I-Microchip Webindawo(Buza umbuzo)
I-Microchip inikeza ukusekelwa kwe-inthanethi nge-ethu webindawo ku www.microchip.com/. Lokhu webindawo isetshenziselwa ukwenza files kanye nolwazi olutholakala kalula kumakhasimende. Okunye okuqukethwe okutholakalayo kuhlanganisa:
- Ukusekelwa Komkhiqizo - Amashidi wedatha kanye nephutha, amanothi ohlelo lokusebenza kanye ne-sampizinhlelo, izinsiza zokuklama, imihlahlandlela yabasebenzisi kanye nemibhalo yokwesekwa kwezingxenyekazi zekhompuyutha, ukukhishwa kwesofthiwe yakamuva kanye nesofthiwe efakwe kungobo yomlando
- Ukusekelwa Okujwayelekile Kwezobuchwepheshe - Imibuzo Evame Ukubuzwa (FAQs), izicelo zokusekelwa kwezobuchwepheshe, amaqembu ezingxoxo eziku-inthanethi, ukufakwa kuhlu kwamalungu ohlelo lukazakwethu we-Microchip design
- Ibhizinisi le-Microchip - Isikhethi somkhiqizo nemihlahlandlela yoku-oda, ukukhishwa kwakamuva kwabezindaba kwe-Microchip, uhlu lwamasemina nemicimbi, uhlu lwamahhovisi okuthengisa e-Microchip, abasabalalisi nabamele imboni
Isevisi yesaziso sokushintsha umkhiqizo (Buza umbuzo)
Isevisi yesaziso sokushintsha umkhiqizo we-Microchip isiza ukugcina amakhasimende enolwazi ngemikhiqizo ye-Microchip. Ababhalisile bazothola isaziso se-imeyili noma nini lapho kukhona izinguquko, izibuyekezo, izibuyekezo noma iziphambeko ezihlobene nomndeni womkhiqizo othile noma ithuluzi lokuthuthukisa elithandwayo.
Ukuze ubhalise, yiya ku www.microchip.com/pcn bese ulandela imiyalelo yokubhalisa.
Ukwesekwa Kwamakhasimende (Buza umbuzo)
Abasebenzisi bemikhiqizo ye-Microchip bangathola usizo ngeziteshi ezimbalwa:
- Umsabalalisi noma Ummeleli
- Ihhovisi Lokuthengisa Lendawo
- I-Embedded Solutions Engineer (ESE)
- Ukusekela kwezobuchwepheshe
Amakhasimende kufanele athinte umsabalalisi wawo, ummeleli noma i-ESE ukuze bathole ukwesekwa. Amahhovisi okuthengisa endawo nawo ayatholakala ukuze asize amakhasimende. Uhlu lwamahhovisi okuthengisa nezindawo lufakiwe kulo mbhalo.
Ukwesekwa kwezobuchwepheshe kuyatholakala nge- webisayithi ku: www.microchip.com/support
Isici Sokuvikela Ikhodi Yamadivayisi e-Microchip (Buza umbuzo)
Qaphela imininingwane elandelayo yesici sokuvikela ikhodi emikhiqizweni ye-Microchip:
- Imikhiqizo ye-Microchip ihlangabezana nokucaciswa okuqukethwe ku-Microchip Data Sheet yayo.
- I-Microchip ikholelwa ukuthi umkhaya wayo wemikhiqizo uvikelekile uma usetshenziswa ngendlela ehlosiwe, ngaphakathi kwezicaciso zokusebenza, nangaphansi kwezimo ezivamile.
- Amanani e-Microchip futhi avikela ngokunamandla amalungelo ayo okuvikela ubunikazi bokusungula. Imizamo yokwephula izici zokuvikela ikhodi yomkhiqizo we-Microchip inqatshelwe ngokuphelele futhi ingase yephule uMthetho we-Digital Millennium Copyright Act.
- I-Microchip nanoma yimuphi omunye umkhiqizi we-semiconductor ongaqinisekisa ukuphepha kwekhodi yayo. Ukuvikelwa kwekhodi akusho ukuthi siqinisekisa ukuthi umkhiqizo “awunakunqamuka”. Ukuvikelwa kwekhodi kuhlala kuvela njalo. I-Microchip izinikele ekuthuthukiseni ngokuqhubekayo izici zokuvikela ikhodi zemikhiqizo yethu.
Isaziso Somthetho (Buza umbuzo)
Lokhu kushicilelwa kanye nolwazi olulapha kungasetshenziswa kuphela emikhiqizweni ye-Microchip, okuhlanganisa ukuklama, ukuhlola, nokuhlanganisa imikhiqizo ye-Microchip nohlelo lwakho lokusebenza. Ukusetshenziswa kwalolu lwazi nganoma iyiphi enye indlela kwephula le migomo. Ulwazi olumayelana nezinhlelo zokusebenza zedivayisi lunikezwa ukuze kube lula kuwe futhi lungase luthathelwe indawo yizibuyekezo. Kuyisibopho sakho ukuqinisekisa ukuthi isicelo sakho sihlangabezana nezicaciso zakho. Xhumana nehhovisi lakho lendawo yokuthengisa le-Microchip ukuze uthole ukwesekwa okwengeziwe noma, thola ukwesekwa okwengeziwe kokuthi www.microchip.com/en-us/support/design-help/client-support-services.
LOLU LWAZI LUNIKEZWA YI-MICROCHIP “NJENGOBA LUKHO”. I-MICROCHIP AYIKUMELELI NOMA IZIQINISEKISO ZANOMA YILUPHI UHLOBO NOMA KUCHAZEKILE NOMA OKUSHIWO, OKUBHALWE NOMA OKUSHIWO, OKUMTHETHO NOMA OKUNYE, OKUPHATHELENE NOLWAZI KUBANDAKANYA KODWA AKUkhawulelwe KUNOMA YILUPHI ISIQINISEKISO, UKWENZA, UKWENZA, UKWENZA, UKWENZA. NGENHLOSO ETHILE, NOMA IZIQINISEKISO EZIPHATHELENE NEsimo, IKHWALITHI, NOMA UKUSEBENZA KWAYO.
AKUKHO MCIMBI ONGAZOBA NESIbophezelo I-MICROCHIP NGANOMA YILUPHI ULWAZI , ESIKHETHEKILE, ESIJEZISO, ISENZAKALO, NOMA OKULANDELAYO, UMONAKALO, Izindleko, NOMA Izindleko zanoma yiluphi uhlobo oluhlotshaniswa noLWAZI NOMA UKUSETSHENZISWA KWALO, NOMA KUBE NEZINTO EZIPHUMAYO, OKUNGENZEKA NOMA UMONAKALO UNGABONAKALA. NGENXA ESIPHELELE NGENXA YOKUMTHETHO, ISIBOPHO SE-MICROCHIP SONKE KUZO ZONKE IZINKINGA NGANOMA YIYIPHI INDLELA EPHATHANA NOLWAZI NOMA UKUSETSHENZISWA KWALO NGEKE KWEQE INANI LEZINKOKHELO, UMA LIKHONA, OYIKHOKHE NGOKUQONDILE UKUZE UKWAZISE.
Ukusetshenziswa kwamadivayisi e-Microchip ekusekeleni impilo kanye/noma izicelo zokuphepha kusengozini yomthengi ngokuphelele, futhi umthengi uyavuma ukuvikela, ukunxephezela nokubamba i-Microchip engenabungozi kunoma yimuphi nanoma yimuphi umonakalo, izimangalo, amasudi, noma izindleko ezibangelwa ukusetshenziswa okunjalo. Awekho amalayisensi adluliswayo, ngokusobala noma ngenye indlela, ngaphansi kwanoma imaphi amalungelo empahla yengqondo ye-Microchip ngaphandle kwalapho kushiwo ngenye indlela.
Izimpawu zokuhweba (Buza umbuzo)
Igama le-Microchip nelogo, ilogo ye-Microchip, i-Adaptec, i-AVR, i-logo ye-AVR, i-AVR Freaks, i-BesTime, i-BitCloud, i-CryptoMemory, i-CryptoRF, i-dsPIC, i-flexPWR, i-HELDO, i-IGLOO, i-JukeBlox, i-KeeLoq, i-Kleer, i-LANCheck, i-LinkMD, i-maXSty MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetri , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, kanye ne-XMEGA izimpawu zokuthengisa ezibhalisiwe ze-Microchip Technology Incorporated e-USA nakwamanye amazwe.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, I-TimeProvider, TrueTime, ne-ZL izimpawu zokuthengisa ezibhalisiwe ze-Microchip Technology Incorporated e-USA Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching, BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication. , CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit Serial Programming, ICSP, INICnet, Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-D-DK , maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, RTAX , RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total Endurance, Trusted Time, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewI-Span, i-WiperLock, i-XpressConnect, ne-ZENA izimpawu zokuthengisa ze-Microchip Technology Incorporated e-USA nakwamanye amazwe.
I-SQTP iwuphawu lwesevisi lwe-Microchip Technology Incorporated e-USA
Ilogo ye-Adaptec, Frequency on Demand, Silicon Storage Technology, ne-Symmcom izimpawu zokuthengisa ezibhalisiwe ze-Microchip Technology Inc. kwamanye amazwe.
I-GestIC inguphawu lokuthengisa olubhalisiwe lwe-Microchip Technology Germany II GmbH & Co. KG, inkampani ephethwe yi-Microchip Technology Inc., kwamanye amazwe.
Zonke ezinye izimpawu zokuthengisa ezishiwo lapha ziyimpahla yezinkampani zazo.
© 2023, Microchip Technology Incorporated kanye nezinkampani ezingaphansi kwayo. Wonke Amalungelo Agodliwe. I-ISBN: 978-1-6683-2140-9
Uhlelo Lokuphatha Ikhwalithi (Buza umbuzo)
Ukuze uthole ulwazi mayelana ne-Microchip's Quality Management Systems, sicela uvakashele www.microchip.com/quality.
Ukuthengisa Nesevisi Yomhlaba Wonke
| I-AMERICAS | I-ASIA/PACIFIC | I-ASIA/PACIFIC | I-Europe |
| Ihhovisi Lebhizinisi 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Ucingo: 480-792-7200 Ifeksi: 480-792-7277 Ukusekela kwezobuchwepheshe: www.microchip.com/support Web Ikheli: www.microchip.com Atlanta Duluth, GA Ucingo: 678-957-9614 Ifeksi: 678-957-1455 Austin, TX Ucingo: 512-257-3370 EBoston Westborough, MA Ucingo: 774-760-0087 Ifeksi: 774-760-0088 Chicago Itasca, IL Ucingo: 630-285-0071 Ifeksi: 630-285-0075 Dallas I-Addison, TX Ucingo: 972-818-7423 Ifeksi: 972-818-2924 I-Detroit Novi, MI Ucingo: 248-848-4000 Houston, TX Ucingo: 281-894-5983 I-Indianapolis Noblesville, IN Ucingo: 317-773-8323 Ifeksi: 317-773-5453 Ucingo: 317-536-2380 e-Los Angeles Mission Viejo, CA Ucingo: 949-462-9523 Ifeksi: 949-462-9608 Ucingo: 951-273-7800 Raleigh, NC Ucingo: 919-844-7510 New York, NY Ucingo: 631-435-6000 San Jose, CA Ucingo: 408-735-9110 Ucingo: 408-436-4270 Canada - Toronto Ucingo: 905-695-1980 Ifeksi: 905-695-2078 |
Australia - Sydney Ucingo: 61-2-9868-6733 China - Beijing Ucingo: 86-10-8569-7000 China - Chengdu Ucingo: 86-28-8665-5511 China - Chongqing Ucingo: 86-23-8980-9588 China - Dongguan Ucingo: 86-769-8702-9880 China - Guangzhou Ucingo: 86-20-8755-8029 China - Hangzhou Ucingo: 86-571-8792-8115 I-China - Hong Kong SAR Ucingo: 852-2943-5100 China - Nanjing Ucingo: 86-25-8473-2460 China - Qingdao Ucingo: 86-532-8502-7355 China - Shanghai Ucingo: 86-21-3326-8000 China - Shenyang Ucingo: 86-24-2334-2829 China - Shenzhen Ucingo: 86-755-8864-2200 China - Suzhou Ucingo: 86-186-6233-1526 China – Wuhan Ucingo: 86-27-5980-5300 China - Xian Ucingo: 86-29-8833-7252 China - Xiamen Ucingo: 86-592-2388138 China - Zhuhai Ucingo: 86-756-3210040 |
I-India - Bangalore Ucingo: 91-80-3090-4444 India - New Delhi Ucingo: 91-11-4160-8631 I-India - iPune Ucingo: 91-20-4121-0141 Japan - Osaka Ucingo: 81-6-6152-7160 Japan - Tokyo Ucingo: 81-3-6880-3770 Korea - Daegu Ucingo: 82-53-744-4301 Korea - Seoul Ucingo: 82-2-554-7200 IMalaysia - Kuala Lumpur Ucingo: 60-3-7651-7906 I-Malaysia - Penang Ucingo: 60-4-227-8870 Philippines – Manila Ucingo: 63-2-634-9065 Singapore Ucingo: 65-6334-8870 I-Taiwan - Hsin Chu Ucingo: 886-3-577-8366 I-Taiwan - Kaohsiung Ucingo: 886-7-213-7830 I-Taiwan - iTaipei Ucingo: 886-2-2508-8600 Thailand - Bangkok Ucingo: 66-2-694-1351 Vietnam - Ho Chi Minh Ucingo: 84-28-5448-2100 |
I-Austria - Wels Ucingo: 43-7242-2244-39 Ifeksi: 43-7242-2244-393 IDenmark - Copenhagen Ucingo: 45-4485-5910 Ifeksi: 45-4485-2829 EFinland - Espoo Ucingo: 358-9-4520-820 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Garching Ucingo: 49-8931-9700 Germany - Haan Ucingo: 49-2129-3766400 Germany - Heilbronn Ucingo: 49-7131-72400 Germany - Karlsruhe Ucingo: 49-721-625370 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Rosenheim Ucingo: 49-8031-354-560 Israel - Ra'anana Ucingo: 972-9-744-7705 Italy - Milan Ucingo: 39-0331-742611 Ifeksi: 39-0331-466781 Italy - Padova Ucingo: 39-049-7625286 I-Netherlands - Drunen Ucingo: 31-416-690399 Ifeksi: 31-416-690340 I-Norway - Trondheim Ucingo: 47-72884388 Poland - Warsaw Ucingo: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Ucingo: 46-8-5090-4654 UK - Wokingham Ucingo: 44-118-921-5800 Ifeksi: 44-118-921-5820 |
© 2023 Microchip Technology Inc.
kanye nezinkampani ezingaphansi kwayo
I-DS50003503A-ikhasi 18
Amadokhumenti / Izinsiza
 |
I-MICROCHIP T-Format Interface Software [pdf] Umhlahlandlela Womsebenzisi MPF300T, T-Format Interface Software, Interface Software, Software |