MICROCHIP T-Format Interface Software Guide Guide

T-Format Interface v1.1 User Guide

Mataupu lalafi

1 Folasaga (Fai se Fesili)

2 Fa'amatalaga Fa'atino (Fai se Fesili)

3 T-Format Parameter Feso'ota'iga ma Fa'ailoga Fa'asinoala (Fa'ai se Fesili)

4 Ata o Taimi (Fai se Fesili)

5 Testbench (Fai se Fesili)

6 Toe Iloilo Tala'aga (Fai se Fesili)

7 Microchip Faamatalaga (Fai se Fesili)

8 Pepa / Punaoa

8.1 Fa'asinomaga

Folasaga (Fai se Fesili)

O le T-Format interface IP ua mamanuina e tuʻuina atu ai se atinaʻe mo FPGAs e fesoʻotaʻi ma faʻasalalauga eseese Tamagawa oloa e pei o rotary encoders.

Aotelega (Fai se Fesili)

O le laulau o lo'o i lalo o lo'o tu'uina atu ai se aotelega o uiga fa'aoga T-Format.
Siata 1. T-Format Interface Uiga

Autu Version	O lenei pepa e fa'atatau ile T-Format Interface v1.1.
Masini Lagolago Aiga	PolarFire® SoC PolarAfi RTG4^™ IGLOO® 2 SmartFusion® 2
Lagolagoina Meafaigaluega tafe	Manaomia Libero® SoC v11.8 poʻo faʻasalalauga mulimuli ane.
Laisene	O loʻo tuʻuina atu le faʻailoga faʻailoga RTL atoa mo le autu, e mafai ai ona faʻapipiʻi le autu ma SmartDesign. Simulation, Synthesis, ma le Layout o loʻo faʻatinoina i le polokalama Libero. T-Format Interface ua laiseneina ile RTL fa'ailoga e tatau ona fa'atau ese'ese. Mo nisi fa'amatalaga, va'ai T-Format Interface.

Vaega (Fai se Fesili)

T-Format Interface ei ai vaega taua nei:

Tu'u ma maua fa'amaumauga fa'asologa mai le fa'a tino (RS-485 interface)

Fa'asoa fa'amaumauga e tusa ai ma le T-Format ma tu'uina atu nei fa'amaumauga e fai ma resitara e faitauina e poloka mulimuli ane
Siaki mo mea sese, e pei o le parity, Cyclic Redundancy Check (CRC) le fetaui, faʻasalalau mea sese, ma isi mea, o loʻo lipotia mai e le masini fafo.

Tuuina atu se galuega faʻailo e faʻaosoina pe a oʻo atu le numera o faʻalavelave faʻafuaseʻi i luga o le tapulaa faʻatulagaina
Tuuina atu ports mo se poloka afi CRC fafo ina ia mafai e le tagata faʻaoga ona suia le CRC polynomial pe a manaʻomia

Fa'atinoina ole IP Core ile Libero Design Suite (Fai se Fesili)

O le IP autu e tatau ona faʻapipiʻi i le IP Catalog o le Libero SoC software. O lenei mea e otometi lava ona faia e ala i le IP Catalog update function i le Libero SoC software, poʻo le IP core e sii mai ma le lima mai le lisi. O le taimi lava e faʻapipiʻi ai le IP core i le Libero SoC software IP Catalog, o le autu e faʻapipiʻiina, faʻatupuina, ma faʻapipiʻiina i totonu o le meafaigaluega Smart Design mo le faʻaofiina i le lisi o poloketi Libero.

Fa'aaogāina ma Fa'atinoga (Fai se Fesili)

Ole laulau o lo'o i lalo o lo'o lisiina ai le fa'aogaina o masini na fa'aogaina mo le T-Format Interface.
Laulau 2. T-Format Interface Utilization

Fa'amatalaga Fa'atonu		Punaoa		Fa'atinoga (MHz)	RAMs		Math Blocks	Chip Globals
Aiga	Meafaigaluega	LUTs	DFF	Fa'atinoga (MHz)	LSRAM	μSRAM	Math Blocks	Chip Globals
PolarFire® SoC	MPFS250T	248	256	200	0	0	0	0
PolarAfi	MPF300T	236	256	200	0	0	0	0
SmartFusion® 2	M2S150	248	256	200	0	0	0	0

Taua:

o fa'amaumauga i lenei laulau o lo'o pu'eina e fa'aaoga ai le fa'asologa masani ma le fa'atulagaina. CDR reference clock source na seti i Dedicated faatasi ai ma isi tulaga tau fetuutuunai e le suia.

O le uati e faʻatapulaʻaina i le 200 MHz aʻo faʻatautaia le suʻesuʻega taimi e ausia ai numera faʻatinoga.

Fa'amatalaga Fa'atino (Fai se Fesili)

O lenei vaega o loʻo faʻamatalaina ai faʻamatalaga faʻatinoga o le T-Format Interface.
O le ata o lo'o i lalo o lo'o fa'aalia ai le ata pito i luga o poloka o le T-Format Interface.
Ata 1-1. Fa'afanua Poloka Tulaga Maualuga o T-Format Interface IP

Mo fa'amatalaga atoa ile T-Format, va'ai Tamagawa fa'amaumauga. O le laulau o loʻo i lalo o loʻo lisiina ai tulafono eseese e faʻaaogaina e talosagaina ai faʻamatalaga mai le masini fafo ma a latou galuega, ma le numera o faʻamaumauga o faʻamaumauga e toe faʻafoʻi mo poloaiga taʻitasi.

Laulau 1-1. Poloaiga mo Pulea Field

Poloaiga ID	Galuega	Numera o Fa'amaumauga Fa'amaumauga i le Fa'avaa Maua
0	Angle Rotor (Fa'amatalaga Faitau)	3
1	Fa'amatalaga fa'atele (Fa'amatalaga Faitau)	3
2	Encoder ID (Fa'amatalaga Faitau)	1
3	Rotor Angle ma Teleturn data (Fa'amatalaga Faitau)	8
7	Toe setiina	3
8	Toe setiina	3
C	Toe setiina	3

O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'asologa o poloka poloka o le T-Format Interface.

Ata 1-2. Fa'asologa o Polokalama Tulaga-Tulaga o le T-Format Interface

O le ata o lo'o i lalo o lo'o fa'aalia ai le fa'aogaina o poloka poloka o le T-Format interface.
Ata 1-3. Fuafuaga Poloka Ata o T-Format Interface IP

Feso'ota'iga feso'ota'iga ta'itasi ile T-Format e amata ile tu'uina atu ole Pusa Pulea (CF) mai le tagata talosaga, soso'o ai ma se fa'avaa na maua mai le masini fafo. O le poloka TF Transmitter e fa'atupuina fa'amaumauga fa'asologa e lafo i le masini fafo. E fa'atupuina ai fo'i se fa'ailoga tx_en_o e mana'omia e nisi fa'aliliu RS-485. E maua e le encoder faʻamatalaga tuʻuina atu, ma tuʻuina atu se faʻavaa o faʻamaumauga faʻasologa i le IP, lea e maua i le rx_i faʻaoga uafu o le poloka IP. O le poloka TF_CF_DET e muamua iloa le fanua pulea ma faʻamaonia le tau ID. O le umi o faʻamaumauga e faʻatatau i luga o le tau ID na maua, ma o fanua mulimuli ane e maua ma teu i totonu o resitala taʻitasi e faʻaaoga ai le poloka TF_DATA_READ. A maeʻa ona teuina faʻamaumauga atoa, o faʻamatalaga i fanua uma sei vagana ai le CRC fanua e auina atu i fafo CRC generator poloka, ma o le CRC fuafuaina na gaosia e lenei poloka e faʻatusatusa i le CRC maua. O nisi o isi mea sese o loʻo siakiina foi, ma o le done_o faʻailoga e faʻamaonia ('1' mo le tasi sys_clk_i cycle) pe a uma fefaʻatauaiga saoloto.

1.1 Taulimaina o Mease (Fai se Fesili)

O le poloka e iloa ai mea sese nei:

Fa'aletonu fa'atasi i le fanua fa'atonutonu maua
Leaga le fa'asologa amata ile fanua fa'atonutonu maua

Le'i atoatoa fe'au o lo'o pipi'i le laina RX ile 0 pe mau ile 1
CRC le fetaui i le va o faʻamaumauga i le fanua CRC maua, ma faʻatusatusa CRC

Tuuina atu mea sese e pei o le paʻu sese poʻo le faʻasalaga sese i le CF faʻasalalau, e pei ona faitau mai le bit 6 ma le bit 7 o le tulaga tulaga (vaai Tamagawa fa'amaumauga).

O nei mea sese, pe a iloa e le poloka, e i'u ai i se fa'ailoga fa'aletonu e fa'aopoopoina. Pe a sili atu le tau o le fa'ailoga fa'aletonu i le tau fa'atulagaina (fa'aogaina e fa'aaoga ai le g_FAULT_THRESHOLD), e fa'ailoa mai le fa'ailoga alarm_o.
E fa'ate'a le fa'ailo pe a maualuga le fa'ailoga alarm_clr_i mo le tasi taimi sys_clk_i. O le tf_error_o faailo e faʻaaogaina e faʻaalia ai le ituaiga o mea sese na tupu. O lenei faʻamaumauga e toe setiina i le 0, pe a amata le isi fefaʻatauaiga (start_i is
'1').
O le laulau o loʻo i lalo o loʻo faʻamatalaina ai mea sese eseese ma o latou tulaga tutusa i le tf_error_o resitala.

Laulau 1-2. mata'utia Tusi Resitala Fa'amatalaga

Bit	Galuega
5	TX delimiter sese - e pei ona faʻaalia i le bit 7 o le tulaga tulaga
4	TX parity sese - e pei ona faʻaalia i le bit 6 o le tulaga tulaga
3	CRC le fetaui i le va o le fanua CRC maua mai pologa ma fa'amaumauga CRC fa'atatau
2	Le'i atoatoa fe'au – fa'ailoga fa'aletonu e mafua ai le taimi
1	Leaga le fa'asologa o le amataga i le fanua fa'atonutonu maua - "0010" e le'i maua a'o le'i fa'agata
0	Fa'asalaga Fa'atasi i le fanua fa'atonutonu maua

T-Format Interface Parameters ma Faailoga Fa'ailoga (Fai se Fesili)

O lenei vaega o loʻo talanoaina ai faʻamaufaʻailoga i le T-Format Interface GUI configurator ma faʻailoga I / O.

2.1 Fa'atulagaga Fa'atonu(Fai se Fesili)

O le laulau o loʻo i lalo o loʻo lisiina ai le faʻamatalaga o faʻamaufaʻailoga faʻaogaina o loʻo faʻaogaina i le faʻaogaina o meafaigaluega o le T-Format Interface. O fa'asologa lautele ia ma e fesuisuia'i e tusa ai ma le mana'oga o le talosaga.
Laulau 2-1. Fua Fa'atatau

Igoa Faailoga	Fa'amatalaga
g_TIMEOUT_TIME	Fa'amatala le taimi fa'agata i le va o fanua fa'asolosolo i totonu o se fa'avaa i le tele o le sys_clk_i vaitaimi.
g_FAULT_THRESHOLD	Fa'amatala le tau o le fa'aletonu - e fa'ailoa le alarm_o pe a sili atu le tau fa'aletonu.

2.2 Ulufale ma Fa'ailoga Fa'ailoga (Fai se Fesili)

O le laulau o lo'o i lalo o lo'o lisiina ai ports o lo'o i totonu ma fa'aulufalega o le T-Format Interface.

Laulau 2-2. Ulufale ma mea e maua mai i le T-Format Interface

Igoa Faailoga	Fa'atonuga	Fa'amatalaga
reset_i	Ulufale	Fa'ailoilo toe setiina maualalo asynchronous i le mamanu
sys_clk_i	Ulufale	Uati faiga
ref_clk_i	Ulufale	Uati fa'asino, 2.5MHz*
amata_i	Ulufale	Amata faailo e amata T-Format fefaʻatauaiga - e tatau ona '1' mo le tasi sys_clk_i cycle
alarm_clr_i	Ulufale	Fa'ailo fa'alilolilo - e tatau ona '1' mo le tasi sys_clk_i cycle
rx_i	Ulufale	Serialdata fa'aoga mai le encoder
crc_faia_i	Ulufale	Fa'ailoga mai fafo CRC poloka –e tatau ona '1' mo le tasi sys_clk_i taamilosaga
cmd_i	Ulufale	ControlField ID e lafo ile encoder
crc_calc_i	Ulufale	Output of CRC Generator poloka ma fa'ailoga ua fesuia'i, o lona uiga, crc_gen(7) -> crc_calc_i (0), crc_gen(6) -> crc_calc_i(1), .. crc_gen(0) -> crc_calc_i(7)
tx_o	Tuuina atu	Fa'amatalaga fa'asologa fa'asologa e fa'akokolo
tx_en_o	Tuuina atu	Fa'asalalau fa'ailo fa'aagaaga – alu maualuga pe a fa'agasolo le fa'asalalauga
faia_o	Tuuina atu	Fa'ailoga ua mae'a fefa'ataua'iga – fa'amaonia e pei o se pulupulu ma le lautele o le tasi sys_clk_i cycle
alarm_o	Tuuina atu	Fa'ailoga fa'ailo – fa'ailoa pe a tutusa le aofa'i o fa'aletonu ma le tau fa'ailoga ua fa'atulaga ile g_FAULT_THRESHOLD
start_crc_o	Tuuina atu	Amata faailo mo poloka faufale CRC

data_crc_o	Tuuina atu	Fa'amatalaga mo poloka fa'atupuina o le CRC - o fa'amaumauga e tu'uina atu e pei o: {CF, SF, D0, D1, D2, .. D7} e aunoa ma se fa'agata. I le tulaga o fe'au pupuu (lea e na'o le D0-D2 o lo'o iai fa'amaumauga), o isi matā'upu D3-D7 e fa'aigoaina 0.
tf_error_o	Tuuina atu	TF Error register
ioe	Tuuina atu	Tau ID mai le fanua fa'atonutonu ile fa'avaa na maua*
sf_o	Tuuina atu	Tulaga fanua mai fa'avaa na maua*
d0_o	Tuuina atu	D0field mai le fa'avaa na maua*
d1_o	Tuuina atu	D1field mai le fa'avaa na maua*
d2_o	Tuuina atu	D2field mai le fa'avaa na maua*
d3_o	Tuuina atu	D3field mai le fa'avaa na maua*
d4_o	Tuuina atu	D4field mai le fa'avaa na maua*
d5_o	Tuuina atu	D5field mai le fa'avaa na maua*
d6_o	Tuuina atu	D6field mai le fa'avaa na maua*
d7_o	Tuuina atu	D7field mai le fa'avaa na maua*
crc_o	Tuuina atu	CRC fanua mai le faavaa maua*

Fa'aaliga: Mo nisi fa'amatalaga, va'ai le Tamagawa fa'amatalaga.

Ata o Taimi (Fai se Fesili)

O lenei vaega o lo'o fa'atalanoaina le T-Format Interface ata o taimi.
O le ata o loʻo i lalo o loʻo faʻaalia ai se fefaʻatauaiga masani T-Format. O le fa'ailoga done_o e fa'atupuina i le fa'ai'uga o fefa'ataua'iga e leai se mea sese, ae tumau pea le fa'ailoga tf_error_o i le 0.
Ata 3-1. Fa'asologa o Taimi - Fefa'ataua'iga masani

O le ata o loʻo i lalo o loʻo faʻaalia ai se T-Format fefaʻatauaiga ma le CRC sese. Ole fa'ailoga done_o e le'i fa'atupuina, ma o le tf_error_o fa'ailoga e 8, e ta'u mai ai ua tupu se CRC le fetaui. Ole fa'ailoga done_o e fa'atupuina pe a leai se mea sese ile isi fefa'ataua'iga.

Ata 3-2. Fa'asologa o Taimi - CRC Sese

Su'ega Su'ega (Fai se Fesili)

E fa'aogaina se nofoa fa'ata'ita'i tu'ufa'atasi e fa'amaonia ma fa'ata'ita'i le T-Format Interface e ta'ua o le nofoa su'ega a le tagata fa'aoga. Ua tuʻuina atu le Testbench e siaki ai galuega a le T-Format Interface IP.

4.1 Fa'ata'ita'iga (Fai se Fesili)
O laasaga nei o loʻo faʻamatalaina pe faʻafefea ona faʻataʻitaʻiina le autu e faʻaaoga ai le testbench:

Tatala le talosaga Libero SoC, kiliki Libero SoC Catalog tab, faʻalautele Solutions-MotorControl

Kiliki faalua T-Format Interface, ona kiliki lea o le OK. O faʻamaumauga e fesoʻotaʻi ma le IP o loʻo lisiina i lalo o Faʻamaumauga.
Taua: Afai e te le vaʻai i le Catalog tab, faʻafeiloaʻi i View Windows menu ma kiliki Catalog e faʻaalia ai.
Ata 4-1. T-Format Interface IP Core i Libero SoC Catalog
I luga o le Stimulus Hierarchy tab, kiliki-matau testbench (t_format_interface_tb.v), faasino i le Simulate Pre-Synth Design, ona kiliki lea o le Open Interactively.
Taua: Afai e te le vaʻai i le Stimulus Hierarchy tab, faʻafeiloaʻi i View > Windows menu ma kiliki Stimulus Hierarchy e fa'aalia.

Ata 4-2. Fa'ata'ita'i Fuafuaga Fa'amua'i Fa'asologa

ModelSim tatala i le suʻega suʻega file e pei ona faaalia i le ata lea.
Ata 4-3. ModelSim Faʻamalama Faʻamalama

Taua: Afai e faʻalavelaveina le faʻataʻitaʻiga ona o le taimi faʻatapulaʻa o loʻo faʻamaonia i le .do file, faʻaaoga le taʻavale -all command e faʻamaeʻa ai le faʻataʻitaʻiga.

Toe Iloilo Tala'aga (Fai se Fesili)

O le tala fa'asolopito o lo'o fa'amatalaina suiga na fa'atinoina i le pepa. O suiga o lo'o lisiina e ala i toe iloiloga, amata i le lomiga aupito lata mai.
Laulau 5-1. Toe Iloilo Tala'aga

Toe Iloiloga	Aso	Fa'amatalaga
A	02/2023	Ole lisi lea o suiga ile toe iloiloga A ole pepa: • Siitia le pepa i le mamanu Microchip. • Fa'afouina le numera o le pepa i le DS50003503A mai le 50200812. • Faaopoopo 3. Ata o Taimi. • Faaopoopo 4. Su'ega Su'ega.
1.0	02/2018	Toefuataiga 1.0 o le lomiga muamua lea o lenei pepa.

Microchip FPGA Lagolago (Fai se Fesili)

Microchip FPGA products group backs its products with various support services, including Customer Service, Customer Technical Support Center, a webnofoaga, ma ofisa faatau i le lalolagi atoa. E fautuaina tagata fa'atau e asiasi i Microchip i luga ole laiga a'o le'i fa'afeso'ota'i le lagolago ona e foliga mai ua uma ona tali a latou fesili.
Fa'afeso'ota'i le Nofoaga Autu Lagolago Fa'apitoa e ala ile webnofoaga i www.microchip.com/support. Ta'u le numera o le Vaega o Meafaigaluega FPGA, filifili le vaega o mataupu talafeagai, ma fa'apipi'i le mamanu files a'o faia se mataupu lagolago fa'apitoa.
Fa'afeso'ota'i Auaunaga Fa'atau mo le lagolago o oloa e le fa'apitoa, e pei o le tau o oloa, fa'aleleia o oloa, fa'afouga fa'amatalaga, tulaga oka, ma le fa'atagaina.

Mai Amerika i Matu, valaau 800.262.1060
Mai le lalolagi atoa, valaau 650.318.4460
Fax, mai so'o se mea i le lalolagi, 650.318.8044

Microchip Fa'amatalaga (Fai se Fesili)

Le Microchip Webnofoaga(Fai se Fesili)

Microchip e maua le lagolago i luga ole laiga e ala i la matou webnofoaga i www.microchip.com/. Lenei web'upega tafa'ilagi e fa'aoga e fai ai files ma fa'amatalaga faigofie ona maua e tagata fa'atau. O nisi o mea e maua e aofia ai:

Lagolago oloa - Pepa faʻamatalaga ma mea sese, faʻamatalaga talosaga ma samppolokalame, punaoa mamanu, ta'iala a le tagata fa'aoga ma pepa lagolago mo meafaigaluega, fa'asalalauga fou fa'akomepiuta ma polokalama fa'amaumauga

Lagolago Faʻatekinisi Lautele - Fesili e masani ona fesiligia (FAQs), talosaga lagolago faʻapitoa, faʻasalalauga i luga ole laiga, Microchip design partner programme list
Pisinisi o Microchip - Faʻatau oloa ma taʻiala faʻatonu, faʻasalalauga lata mai a Microchip, lisi o semina ma mea na tutupu, lisi o ofisa faʻatau Microchip, tufatufaina ma sui fale gaosimea

Au'aunaga Fa'asilasilaga Suiga o Mea (Fai se Fesili)

O le auaunaga fa'asilasilaga suiga o oloa a Microchip e fesoasoani e fa'amautu ai tagata fa'atau i oloa Microchip. O le a maua e le au fai saofaga le faʻamatalaga imeli i soʻo se taimi e iai suiga, faʻafouga, toe teuteuga poʻo mea sese e fesoʻotaʻi ma se aiga o oloa faʻapitoa poʻo meafaigaluega atinaʻe e fiafia i ai.
Ina ia lesitala, alu i www.microchip.com/pcn ma mulimuli i faatonuga o le resitalaina.

Lagolago Tagata Fa'atau (Fai se Fesili)

O tagata fa'aoga o oloa Microchip e mafai ona maua fesoasoani e ala i le tele o auala:

Fa'asoa po'o le Sui
Ofisa Fa'atauga Fa'alotoifale
Embedded Solutions Engineer (ESE)

Lagolago Fa'atekinisi

E tatau i tagata fa'atau ona fa'afeso'ota'i le latou tufatufaina, sui po'o le ESE mo le lagolago. O loʻo avanoa foʻi ofisa faʻatau i le lotoifale e fesoasoani i tagata faʻatau. O lo'o iai se lisi o ofisa fa'atau ma nofoaga i totonu o lenei pepa.
E maua le lagolago fa'apitoa e ala ile webnofoaga i: www.microchip.com/support

Fa'ailoga Puipuiga o Fa'ailoga Fa'atonu a Microchip (Fai se Fesili)

Manatua faʻamatalaga o loʻo i lalo o le faʻaogaina o le puipuiga o tulafono i luga o oloa Microchip:

O oloa Microchip e fetaui ma faʻamatalaga o loʻo i totonu o la latou Pepa Faʻamatalaga Microchip.
E talitonu Microchip o lona aiga o oloa e saogalemu pe a faʻaaogaina i le auala faʻamoemoeina, i totonu o faʻamatalaga faʻaogaina, ma i lalo o tulaga masani.

Microchip fa'atauaina ma puipuia fa'amalosi ana aia tatau tau meatotino. O taumafaiga e soli le tulafono o le puipuiga o le oloa Microchip e matua fa'asaina ma e ono solia ai le Digital Millennium Copyright Act.
E le mafai e le Microchip poʻo se isi mea gaosi semiconductor ona faʻamaonia le saogalemu o lana tulafono. O le puipuiga o tulafono laiti e le o lona uiga tatou te faʻamautinoa o le oloa e "le mafai ona motusia". O le puipuiga o tulafono laiti o lo'o fa'asolosolo pea. Microchip ua tuuto atu i le faʻaauauina pea o le faʻaleleia atili o uiga puipuia o tulafono a tatou oloa.

Faasilasilaga Faaletulafono (Fai se Fesili)

O lenei lomiga ma faʻamatalaga o loʻo i totonu e mafai ona faʻaaogaina naʻo oloa Microchip, e aofia ai le mamanu, suʻega, ma tuʻufaʻatasia oloa Microchip ma lau talosaga. O le fa'aogaina o nei fa'amatalaga i so'o se isi lava faiga e solia ai nei aiaiga. O fa'amatalaga e uiga i le fa'aogaina o masini e tu'uina atu mo na'o lou fa'amalieina ma e ono suia i fa'afouga. O lau matafaioi le faʻamautinoa o lau talosaga e fetaui ma au faʻamatalaga. Fa'afeso'ota'i lou ofisa fa'atau Microchip fa'apitonu'u mo se lagolago fa'aopoopo pe, maua se lagolago fa'aopoopo ile www.microchip.com/en-us/support/design-help/client-support-services.
O LENEI FAʻAMATALAGA E TUUINA E MICROCHIP "AS IS". E LEAI FAIA e le MICROCHIP ni sui po'o se fa'amaoniga o so'o se ituaiga pe fa'aalia pe fa'aali, tusia pe tugutu, tulāfono po'o se isi mea, e feso'ota'i ma fa'amatalaga e aofia ai ae le tapula'a i so'o se fa'amaoniaga fa'amaonia, fa'amaonia, ma le fa'amaoniaina. FAAMOEMOEGA, POO WARRANTY E FAI I ONA TULAGA, TULAGA, POO LE FAIGALUEGA.
E LEAI SE MEA E TATAU AI MICROCHIP MO SO'O SE FA'AMATALAGA, FA'AMATALAGA, FA'ASA'OGA, FA'AMATALAGA, PO'O LE FA'A'ALI'AGA MA'U'U, FA'AFIA, TAU, PO'O LE TU'U'UINA O SO'O SE I'UGA SO'O SE FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA, PE'O LE MEA NA FA'AUPUNA'I, E tusa lava pe fa'aletonu. FA'ATONU POO LE FA'AFIA E FA'AVAEINA. I LE AGATOGA FA'AALIGA E LE TULAFONO, O LE UMA AOFA'IGA A MICROCHIP I TOTOGI UMA I SO'O SE AUALA E FA'AIGA I LE FA'AMATALAGA POO LONA FA'A'OGA E LE'A LOLOA I LE TOTOGI O TOTOGI, AFAI E IAI, NA E TOTOGI SA'O I LE MICROCHIP MO LE FA'AMATALAGA.
O le fa'aogaina o masini Microchip i le tausiga o le ola ma/po'o le saogalemu o lo'o i le tulaga lamatia o le tagata fa'atau, ma e malie le tagata fa'atau e puipuia, fa'aleaga ma taofia Microchip le afaina mai so'o se mea leaga, tagi, suti, po'o tupe alu e mafua mai i lea fa'aoga. E leai ni laisene e tu'uina atu, fa'aalia po'o se isi mea, i lalo o so'o se Microchip aia tatau tau le atamai se'i vagana ua ta'ua.

Fa'ailoga Fa'ailoga (Fai se Fesili)

Le igoa Microchip ma le logo, le Microchip logo, Adaptec, AVR, AVR logo, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus, maXTouch MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ma XMEGA o fa'ailoga fa'amaufa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ma ZL o faʻailoga faʻamaufaʻailoga a Microchip Technology Incorporated i le USA Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching , BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealBridge, In-Circuit IC Serial Program, IN-Circuit IC Fa'atusa Fa'atamai, IntelliMOS, Feso'ota'iga Feso'ota'i, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Faʻamaonia logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, Ripple Blocker, RTAX , RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Aofa'i Tumau, Taimi Fa'alagolago, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ma ZENA o fa'ailoga fa'ailoga a Microchip Technology Incorporated i Amerika ma isi atunu'u.
SQTP ose fa'ailoga tautua a Microchip Technology Incorporated i Amerika
O le logo Adaptec, Frequency on Demand, Silicon Storage Technology, ma Symmcom o fa'ailoga fa'amaufa'ailoga a Microchip Technology Inc. i isi atunu'u.
GestIC ose fa'ailoga fa'amaufa'ailoga a Microchip Technology Germany II GmbH & Co. KG, ose lala o Microchip Technology Inc., i isi atunu'u.
O isi fa'ailoga tau fefa'ataua'iga uma o lo'o ta'ua ii o meatotino a latou kamupani.
© 2023, Microchip Technology Incorporated ma ona lala. Ua Taofia Aia Tatau Uma. ISBN: 978-1-6683-2140-9

Faiga Fa'atonuga (Fai se Fesili)

Mo faʻamatalaga e uiga i Microchip's Quality Management Systems, faʻamolemole asiasi www.microchip.com/quality.

Fa'atauga ma Au'aunaga i le Lalolagi Atoa

AMERIKA	ASIA/ PASIFIK	ASIA/ PASIFIK	Europa
Ofisa Autasi 2355 Sisifo Chandler Blvd. Chandler, AZ 85224-6199 Telefoni: 480-792-7200 Fax: 480-792-7277 Lagolago Fa'atekinisi: www.microchip.com/support Web tuatusi: www.microchip.com Atlanta Duluth, GA Telefoni: 678-957-9614 Fax: 678-957-1455 Austin, TX Telefoni: 512-257-3370 Boston Westborough, MA Telefoni: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Telefoni: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Telefoni: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Telefoni: 248-848-4000 Houston, TX Telefoni: 281-894-5983 Indianapolis Noblesville, IN Telefoni: 317-773-8323 Fax: 317-773-5453 Telefoni: 317-536-2380 Los Angeles Misiona Viejo, CA Telefoni: 949-462-9523 Fax: 949-462-9608 Telefoni: 951-273-7800 Raleigh, NC Telefoni: 919-844-7510 Niu Ioka, NY Telefoni: 631-435-6000 San Jose, CA Telefoni: 408-735-9110 Telefoni: 408-436-4270 Kanata - Toronto Telefoni: 905-695-1980 Fax: 905-695-2078	Ausetalia – Sini Telefoni: 61-2-9868-6733 Saina - Beijing Telefoni: 86-10-8569-7000 Saina – Chengdu Telefoni: 86-28-8665-5511 Saina – Chongqing Telefoni: 86-23-8980-9588 Saina – Dongguan Telefoni: 86-769-8702-9880 Saina – Guangzhou Telefoni: 86-20-8755-8029 Saina – Hangzhou Telefoni: 86-571-8792-8115 Saina - Hong Kong SAR Telefoni: 852-2943-5100 Saina – Nanjing Telefoni: 86-25-8473-2460 Saina – Qingdao Telefoni: 86-532-8502-7355 Saina – Shanghai Telefoni: 86-21-3326-8000 Saina – Shenyang Telefoni: 86-24-2334-2829 Saina – Shenzhen Telefoni: 86-755-8864-2200 Saina – Suzhou Telefoni: 86-186-6233-1526 Saina – Wuhan Telefoni: 86-27-5980-5300 Saina – Xian Telefoni: 86-29-8833-7252 Saina – Xiamen Telefoni: 86-592-2388138 Saina – Zhuhai Telefoni: 86-756-3210040	Initia – Bangalore Telefoni: 91-80-3090-4444 Initia – New Delhi Telefoni: 91-11-4160-8631 Initia - Pune Telefoni: 91-20-4121-0141 Iapani - Osaka Telefoni: 81-6-6152-7160 Iapani - Tokyo Telefoni: 81-3-6880-3770 Korea – Daegu Telefoni: 82-53-744-4301 Korea – Seoul Telefoni: 82-2-554-7200 Meleisia – Kuala Lumpur Telefoni: 60-3-7651-7906 Meleisia – Penang Telefoni: 60-4-227-8870 Filipino – Manila Telefoni: 63-2-634-9065 Singapore Telefoni: 65-6334-8870 Taiuani – Hsin Chu Telefoni: 886-3-577-8366 Taiuani – Kaohsiung Telefoni: 886-7-213-7830 Taiuani – Taipei Telefoni: 886-2-2508-8600 Taialani – Bangkok Telefoni: 66-2-694-1351 Vietnam – Ho Chi Minh Telefoni: 84-28-5448-2100	Ausetalia – Uelese Telefoni: 43-7242-2244-39 Fax: 43-7242-2244-393 Tenimaka – Copenhagen Telefoni: 45-4485-5910 Fax: 45-4485-2829 Finelani – Espoo Telefoni: 358-9-4520-820 Farani – Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Siamani – Garching Telefoni: 49-8931-9700 Siamani – Haan Telefoni: 49-2129-3766400 Siamani – Heilbronn Telefoni: 49-7131-72400 Siamani – Karlsruhe Telefoni: 49-721-625370 Siamani – Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Siamani – Rosenheim Telefoni: 49-8031-354-560 Isaraelu – Ra’anana Telefoni: 972-9-744-7705 Italia – Milan Telefoni: 39-0331-742611 Fax: 39-0331-466781 Italia – Padova Telefoni: 39-049-7625286 Netherlands – Drunen Telefoni: 31-416-690399 Fax: 31-416-690340 Nouei – Trondheim Telefoni: 47-72884388 Polani – Warsaw Telefoni: 48-22-3325737 Romania – Bucharest Tel: 40-21-407-87-50 Sepania - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Suetena – Gothenberg Tel: 46-31-704-60-40 Suetena - Stockholm Telefoni: 46-8-5090-4654 Peretania - Wokingham Telefoni: 44-118-921-5800 Fax: 44-118-921-5820

Pepa / Punaoa

MICROCHIP T-Format Interface Software [pdf] Taiala mo Tagata Fa'aoga
MPF300T, T-Format Interface Software, Software Interface, Software

Fa'asinomaga

Tusi Taiala