T-Format Interface v1.1 Wogwiritsa Ntchito
Mawu Oyamba (Funsani Funso)
T-Format mawonekedwe a IP adapangidwa kuti apereke mawonekedwe a FPGA kuti azilumikizana ndi zinthu zosiyanasiyana Tamagawa zinthu monga ma encoder a rotary.
Chidule (Funsani Funso)
Gome lotsatirali limapereka chidule cha mawonekedwe a mawonekedwe a T-Format.
Table 1. T-Format Interface Makhalidwe
| Core Version | Chikalatachi chikugwira ntchito ku T-Format Interface v1.1. |
| Chida Chothandizira Mabanja |
|
| Zothandizidwa Chida Yendani | Imafunikira Libero® SoC v11.8 kapena kutulutsidwa pambuyo pake. |
| Kupereka chilolezo | Khodi yathunthu ya RTL yosungidwa imaperekedwa pachimake, kupangitsa kuti mazikowo akhazikitsidwe ndi SmartDesign. Kuyerekezera, kaphatikizidwe, ndi kamangidwe kamakhala ndi pulogalamu ya Libero. T-Format Interface ili ndi chilolezo chokhala ndi encrypted RTL yomwe iyenera kugulidwa padera. Kuti mudziwe zambiri, onani T-Format Interface. |
Mawonekedwe (Funsani Funso)
T-Format Interface ili ndi izi:
- Amatumiza ndikulandila zambiri kuchokera pagulu lakuthupi (mawonekedwe a RS-485)
- Imagwirizanitsa deta monga mwa T-Format ndipo imapereka izi ngati zolembera zomwe zimawerengedwa ndi midadada yotsatira
- Kuwunika zolakwika, monga kufanana, kusagwirizana kwa Cyclic Redundancy Check (CRC), kufalitsa zolakwika, ndi zina zotero, zimanenedwa ndi chipangizo chakunja.
- Amapereka ntchito ya alamu yomwe imayambitsidwa ngati kuchuluka kwa zolakwika kupitilira malire okhazikika.
- Amapereka madoko a block ya jenereta ya CRC yakunja kuti wogwiritsa ntchito asinthe CRC polynomial ngati kuli kofunikira.
Kukhazikitsidwa kwa IP Core mu Libero Design Suite (Funsani Funso)
IP core iyenera kukhazikitsidwa ku IP Catalog ya pulogalamu ya Libero SoC. Izi zimachitika zokha kudzera mu pulogalamu ya IP Catalog mu pulogalamu ya Libero SoC, kapena IP core imatsitsidwa pamanja pamndandanda. IP core ikakhazikitsidwa mu Libero SoC software IP Catalog, pachimake chimakonzedwa, kupangidwa, ndikukhazikitsidwa mkati mwa chida cha Smart Design kuti chiphatikizidwe pamndandanda wa projekiti ya Libero.
Kugwiritsa Ntchito Chipangizo ndi Kuchita (Funsani Funso)
Tebulo ili pansipa likuwonetsa kagwiritsidwe kachipangizo ka T-Format Interface.
Table 2. T-Format Interface Utilization
| Tsatanetsatane wa Chipangizo | Zida | Kuchita (MHz) | ma RAM | Masewera a Math | Chip Globals | |||
| Banja | Chipangizo | LUTs | DFF | LSRAM | μSRAM | |||
| PolarFire® SoC | Chithunzi cha MPFS250T | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
| PolarFire | Mtengo wa MPF300T | 236 | 256 | 200 | 0 | 0 | 0 | 0 |
| SmartFusion® 2 | M2S150 | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
Zofunika:
Zomwe zili patebuloli zimajambulidwa pogwiritsa ntchito kaphatikizidwe ndi masinthidwe ake. Gwero la wotchi ya CDR idakhazikitsidwa kuti Yodzipatulira ndi makonzedwe ena osasinthika.- Wotchi imakakamizidwa ku 200 MHz pomwe ikuyesa kusanthula nthawi kuti mukwaniritse ziwerengero zantchito.
Kufotokozera Kwantchito (Funsani Funso)
Gawoli likufotokoza tsatanetsatane wa kukhazikitsidwa kwa T-Format Interface.
Chithunzi chotsatira chikuwonetsa chojambula chapamwamba kwambiri cha T-Format Interface.
Chithunzi 1-1. Chithunzi cha Block Level chapamwamba cha T-Format Interface IP
Kuti mumve zambiri pa T-Format, onani Tamagawa zikalata. Gome lotsatirali limatchula malamulo osiyanasiyana omwe amagwiritsidwa ntchito popempha deta kuchokera ku chipangizo chakunja ndi ntchito zake, ndi chiwerengero cha minda ya deta yomwe yabwezedwa pa lamulo lililonse.
Gulu 1-1. Commands for Control Field
| Command ID | Ntchito | Nambala ya Magawo a Data mu Frame Yolandilidwa |
| 0 | Rotor Angle (Deta Yowerengedwa) | 3 |
| 1 | Multiturn data (Data Read) | 3 |
| 2 | ID ya Encoder (Data Yowerengedwa) | 1 |
| 3 | Rotor Angle ndi Multiturn data (Data Reading) | 8 |
| 7 | Bwezerani | 3 |
| 8 | Bwezerani | 3 |
| C | Bwezerani | 3 |
Chithunzi chotsatira chikuwonetsa mawonekedwe a block block ya T-Format Interface.
Chithunzi 1-2. Chithunzi cha Block-Level Block cha T-Format Interface
Chithunzi chotsatira chikuwonetsa mawonekedwe a block block ya mawonekedwe a T-Format.
Chithunzi 1-3. Chojambula Chogwira Ntchito Chotchinga cha T-Format Interface IP
Kulumikizana kulikonse mu T-Format kumayamba ndi kutumiza kwa Control Frame (CF) kuchokera kwa wopemphayo, kutsatiridwa ndi chimango cholandiridwa kuchokera ku chipangizo chakunja. Chida cha TF Transmitter chimapanga deta yotumizidwa ku chipangizo chakunja. Imapanganso chizindikiro cha tx_en_o chomwe chimafunidwa ndi otembenuza ena a RS-485. Encoder imalandira deta yotumizidwa, ndikutumiza chithunzi cha serial data ku IP, yomwe imalandiridwa mu doko la rx_i la IP block. Gulu la TF_CF_DET limazindikira kaye malo owongolera ndikuzindikiritsa mtengo wa ID. Kutalika kwa data kumatsimikiziridwa kutengera mtengo wa ID womwe walandilidwa, ndipo magawo otsatirawa amalandiridwa ndikusungidwa m'kaundula wotsatira pogwiritsa ntchito block ya TF_DATA_READ. Deta yonse ikasungidwa, deta m'madera onse kupatula munda wa CRC imatumizidwa ku block ya jenereta ya CRC yakunja, ndipo CRC yowerengeka yopangidwa ndi chipikachi ikufanizidwa ndi CRC yolandiridwa. Zina mwazolakwa zina zimafufuzidwanso, ndipo chizindikiro cha done_o chimatsimikiziridwa ('1' pa sys_clk_i cycle) pambuyo pa vuto lililonse laulere.
1.1 Kusamalira Zolakwika (Funsani Funso)
Bululo likuwonetsa zolakwika zotsatirazi:
- Kulakwitsa kwaparity mu gawo lolandilidwa lowongolera
- Kuyamba koyipa koyambira mugawo lolandirira
- Mauthenga osakwanira pomwe mzere wa RX wakhazikika pa 0 kapena wakhazikika pa 1
- Kusagwirizana kwa CRC pakati pa data mu gawo la CRC lolandilidwa, ndi CRC yowerengetsera
- Tumizani Zolakwa monga zolakwika za parity kapena zolakwika za delimiter mu CF yopatsira, monga momwe idawerengedwa kuchokera ku 6 ndi pang'ono 7 ya malo omwe ali (onani Tamagawa tsamba lazambiri).
Zolakwika izi, zikazindikirika ndi block, zimapangitsa kuti chowerengera chiwonjezeke. Chiwopsezo chikaposa mtengo wokhazikika (wokonzedwa pogwiritsa ntchito g_FAULT_THRESHOLD), kutulutsa kwa alarm_o kumatsimikiziridwa.
Kutulutsa kwa alamu kumachotsedwa pamene kulowetsa kwa alarm_clr_i kuli kwakukulu kwa nthawi imodzi ya sys_clk_i. Chizindikiro cha tf_error_o chimagwiritsidwa ntchito kusonyeza mtundu wa zolakwika zomwe zachitika. Deta iyi imakhazikitsidwanso ku 0, ntchito ikayamba (start_i is
'1').
Gome lotsatirali likufotokoza zolakwika zosiyanasiyana ndi malo awo ofanana mu kaundula tf_error_o.
Gulu 1-2. zoopsa Kulembetsa Kufotokozera
| Pang'ono | Ntchito |
| 5 | Cholakwika cha TX delimiter - monga momwe zasonyezedwera pang'ono 7 ya malo omwe ali |
| 4 | Cholakwika cha TX parity - monga zasonyezedwera pang'ono 6 ya gawo la chikhalidwe |
| 3 | Kusagwirizana kwa CRC pakati pa gawo la CRC lolandilidwa kuchokera kwa akapolo ndi data yowerengeredwa ya CRC |
| 2 | Mauthenga osakwanira - cholakwika cha delimiter chomwe chimapangitsa kuti nthawi yatha |
| 1 | Kuyamba koyipa koyambira m'gawo lolandilidwa - "0010" silinalandidwe nthawi isanathe |
| 0 | Parity Zolakwika pagawo lolandilidwa |
T-Format Interface Parameters ndi Interface Signals (Funsani Funso)
Gawoli likukambirana za magawo omwe ali mu T-Format Interface GUI configurator ndi zizindikiro za I / O.
2.1 Zokonda Zosintha(Funsani Funso)
Gome lotsatirali likuwonetsa kufotokozera kwa magawo osinthika omwe amagwiritsidwa ntchito pakukhazikitsa kwa Hardware kwa T-Format Interface. Izi ndi ma generic ma parameters ndipo zimasiyanasiyana malinga ndi zofunikira za pulogalamuyo.
Gulu 2-1. Configuration Parameter
| Dzina la Signal | Kufotokozera |
| g_TIMEOUT_TIME | Imatanthawuza nthawi yopuma pakati pa magawo otsatizana mu chimango mu machulukitsidwe a nthawi ya sys_clk_i. |
| g_FAULT_THRESHOLD | Imatanthawuza kufunikira kolakwika - alarm_o imatsimikiziridwa pamene chowerengera cholakwika chikuposa mtengo uwu. |
2.2 Zolemba ndi Zotulutsa Zizindikiro (Funsani Funso)
Gome lotsatirali limatchula madoko olowera ndi otuluka a T-Format Interface.
Gulu 2-2. Zolowetsa ndi Zotulutsa za T-Format Interface
| Dzina la Signal | Mayendedwe | Kufotokozera |
| sinthani_i | Zolowetsa | Chizindikiro chokhazikika chokhazikika chokhazikika kuti chipangidwe |
| sys_clk_i | Zolowetsa | System Clock |
| ref_clk_i | Zolowetsa | Wotchi yolozera, 2.5MHz* |
| kuyamba_i | Zolowetsa | Startsignal kuti muyambitse T-Format transaction - iyenera kukhala '1' pamayendedwe amodzi a sys_clk_i |
| alarm_cl_i | Zolowetsa | Chizindikiro cha alamu - chiyenera kukhala '1' pa sys_clk_i imodzi |
| rx_ine | Zolowetsa | Kulowetsa kwa serial data kuchokera ku encoder |
| crc_ndachita_i | Zolowetsa | Zachitika kuchokera ku block yakunja ya CRC -ziyenera kukhala '1' pamayendedwe amodzi a sys_clk_i |
| cmd_ine | Zolowetsa | ID ya ControlField itumizidwa ku encoder |
| crc_calc_i | Zolowetsa | Outputof CRC Generator block yokhala ndi ma bits otembenuzidwa, ndiye, crc_gen(7) -> crc_calc_i (0), crc_gen(6)-> crc_calc_i(1), .. crc_gen(0)-> crc_calc_i(7) |
| tx_o | Zotulutsa | Kutulutsa kwa seri data ku encoder |
| tx_en_o | Zotulutsa | Kutumiza kuyatsa chizindikiro - kumakwera kwambiri pamene kufalitsa kuli mkati |
| zachitika_o | Zotulutsa | Chizindikiro chachitika - chonenedwa ngati kugunda kwamtundu umodzi wa sys_clk_i |
| alarm_o | Zotulutsa | Chizindikiro cha alamu - chimatsimikiziridwa pamene chiwerengero cha zochitika zolakwika chikufanana ndi mtengo wokhazikitsidwa mu g_FAULT_THRESHOLD |
| kuyamba_crc_o | Zotulutsa | Chizindikiro choyambira cha block ya CRC |
| deta_crc_o | Zotulutsa | Datafor CRC generation block - deta imaperekedwa monga: {CF, SF, D0, D1, D2, .. D7} popanda malire. Ngati mauthenga afupikitsa (pomwe D0-D2 okha ali ndi deta), magawo ena D3-D7 amatengedwa ngati 0. |
| tf_error_o | Zotulutsa | TF Zolakwika zolembetsa |
| id_o | Zotulutsa | Mtengo wa ID kuchokera kugawo lowongolera mu chimango cholandilidwa * |
| sf_o | Zotulutsa | Status field kuchokera ku chimango cholandilidwa* |
| d0_o | Zotulutsa | D0field kuchokera ku chimango cholandilidwa * |
| d1_o | Zotulutsa | D1field kuchokera ku chimango cholandilidwa * |
| d2_o | Zotulutsa | D2field kuchokera ku chimango cholandilidwa * |
| d3_o | Zotulutsa | D3field kuchokera ku chimango cholandilidwa * |
| d4_o | Zotulutsa | D4field kuchokera ku chimango cholandilidwa * |
| d5_o | Zotulutsa | D5field kuchokera ku chimango cholandilidwa * |
| d6_o | Zotulutsa | D6field kuchokera ku chimango cholandilidwa * |
| d7_o | Zotulutsa | D7field kuchokera ku chimango cholandilidwa * |
| crc_o | Zotulutsa | Gawo la CRC kuchokera ku chimango cholandilidwa * |
Zindikirani: Kuti mudziwe zambiri, onani Tamagawa tsamba lazambiri.
Zithunzi za Nthawi (Funsani Funso)
Gawoli likukambirana za nthawi ya T-Format Interface.
Chithunzi chotsatira chikuwonetsa kusintha kwa T-Format. Chizindikiro cha done_o chimapangidwa kumapeto kwa vuto lililonse laulere, ndipo chizindikiro cha tf_error_o chimakhala pa 0.
Chithunzi 3-1. Chithunzi cha Nthawi - Kusinthana Kwachizolowezi
Chithunzi chotsatira chikuwonetsa kusintha kwa T-Format ndi zolakwika za CRC. Chizindikiro cha done_o sichinapangidwe, ndipo chizindikiro cha tf_error_o ndi 8, kusonyeza kuti CRC yosagwirizana yachitika. Chizindikiro cha done_o chimapangidwa ngati ntchito yotsatira ilibe cholakwika.
Chithunzi 3-2. Chithunzi cha Nthawi - Cholakwika cha CRC
Testbench (Funsani Funso)
Benchi yoyeserera yolumikizana imagwiritsidwa ntchito kutsimikizira ndi kuyesa T-Format Interface yotchedwa ngati benchi yoyesera. Testbench imaperekedwa kuti iwonetsetse magwiridwe antchito a T-Format Interface IP.
4.1 Kuyerekeza (Funsani Funso)
Zotsatirazi zikufotokozera momwe mungayesere pachimake pogwiritsa ntchito testbench:
- Tsegulani pulogalamu ya Libero SoC, dinani Catalog ya Libero SoC, onjezerani Solutions-MotorControl
- Dinani kawiri T-Format Interface, ndiyeno dinani Chabwino. Zolemba zogwirizana ndi IP zalembedwa pansi pa Documentation.
Zofunika: Ngati simukuwona tabu ya Catalog, pitani ku View Windows menyu ndikudina Catalog kuti iwonekere.
Chithunzi 4-1. T-Format Interface IP Core mu Libero SoC Catalog
- Pa tabu ya Stimulus Hierarchy, dinani kumanja testbench ( t_format_interface_tb.v), lozani ku Sanzirani Pre-Synth Design, ndiyeno dinani Open Interactively.
Zofunika: Ngati simukuwona tabu ya Stimulus Hierarchy, pitani ku View > Windows menyu ndikudina Stimulus Hierarchy kuti iwonekere.
Chithunzi 4-2. Kutengera Mapangidwe a Pre-Synthesis
ModelSim imatsegula ndi testbench file monga momwe tawonetsera pa chithunzi chotsatirachi.
Chithunzi 4-3. Window yoyeserera ya ModelSim
Zofunika: Ngati kuyerekezera kusokonezedwa chifukwa cha malire a nthawi yothamanga omwe atchulidwa mu .do file, gwiritsani ntchito run -all command kuti mumalize kuyerekezera.
Mbiri Yobwereza (Funsani Funso)
Mbiri yokonzanso ikufotokoza zosintha zomwe zidakhazikitsidwa muzolemba. Zosinthazo zandandalikidwa ndi kubwereza, kuyambira ndi zofalitsa zamakono.
Gulu 5-1. Mbiri Yobwereza
| Kubwereza | Tsiku | Kufotokozera |
| A | 02/2023 | Zotsatirazi ndi mndandanda wa zosintha pakukonzanso A kwa chikalatacho: • Anasamutsira chikalata ku Microchip template. • Sintha nambala yachikalata kukhala DS50003503A kuchokera ku 50200812. • Wowonjezera 3. Zithunzi za Nthawi. • Wowonjezera 4. Testbench. |
| 1.0 | 02/2018 | Revision 1.0 inali yoyamba kusindikizidwa kwa chikalatachi. |
Thandizo la Microchip FPGA (Funsani Funso)
Gulu lazinthu za Microchip FPGA limathandizira zogulitsa zake ndi ntchito zosiyanasiyana zothandizira, kuphatikiza Makasitomala, Customer Technical Support Center, a webmalo, ndi maofesi ogulitsa padziko lonse lapansi. Makasitomala akulangizidwa kuti aziyendera zapaintaneti za Microchip asanakumane ndi chithandizo chifukwa ndizotheka kuti mafunso awo ayankhidwa kale.
Lumikizanani ndi Technical Support Center kudzera pa website pa www.microchip.com/support. Tchulani nambala ya Gawo la Chipangizo cha FPGA, sankhani gulu loyenera, ndikuyika mapangidwe files popanga chithandizo chaukadaulo.
Lumikizanani ndi Makasitomala kuti muthandizidwe ndi zinthu zomwe si zaukadaulo, monga mitengo yazinthu, kukweza kwazinthu, zambiri zosintha, mawonekedwe oyitanitsa, ndi chilolezo.
- Kuchokera ku North America, imbani 800.262.1060
- Kuchokera kudziko lonse lapansi, imbani 650.318.4460
- Fax, kuchokera kulikonse padziko lapansi, 650.318.8044
Zambiri za Microchip (Funsani Funso)
The Microchip Webmalo(Funsani Funso)
Microchip imapereka chithandizo cha intaneti kudzera pa athu website pa www.microchip.com/. Izi webtsamba limagwiritsidwa ntchito kupanga files ndi zambiri kupezeka mosavuta kwa makasitomala. Zina mwazinthu zomwe zilipo ndi izi:
- Thandizo lazinthu - Mapepala a deta ndi zolakwika, zolemba za ntchito ndi sampmapulogalamu, zida zamapangidwe, maupangiri a ogwiritsa ntchito ndi zikalata zothandizira pa Hardware, kutulutsa kwaposachedwa kwa mapulogalamu ndi mapulogalamu osungidwa zakale
- General Technical Support - Mafunso Ofunsidwa Kawirikawiri (FAQs), zopempha zothandizira luso, magulu okambirana pa intaneti, mndandanda wa mamembala a pulogalamu ya Microchip
- Business of Microchip - Zosankha katundu ndi maupangiri oyitanitsa, zofalitsa zaposachedwa za Microchip, mindandanda yamasemina ndi zochitika, mndandanda wamaofesi ogulitsa a Microchip, ogawa ndi oyimira mafakitale.
Ntchito Yodziwitsa Kusintha Kwazinthu (Funsani Funso)
Ntchito yodziwitsa zakusintha kwazinthu za Microchip imathandizira makasitomala kuti azitha kudziwa zinthu za Microchip. Olembetsa adzalandira zidziwitso za imelo nthawi iliyonse pakakhala zosintha, zosintha, zosintha kapena zolakwika zokhudzana ndi banja linalake kapena chida chachitukuko.
Kuti mulembetse, pitani ku www.microchip.com/pcn ndikutsatira malangizo olembetsera.
Thandizo la Makasitomala (Funsani Funso)
Ogwiritsa ntchito Microchip atha kulandira thandizo kudzera munjira zingapo:
- Wogawa kapena Woimira
- Local Sales Office
- Embedded Solutions Engineer (ESE)
- Othandizira ukadaulo
Makasitomala akuyenera kulumikizana ndi omwe amawagawa, oyimilira kapena ESE kuti awathandize. Maofesi ogulitsa am'deralo amapezekanso kuti athandize makasitomala. Mndandanda wamaofesi ogulitsa ndi malo uli m'chikalatachi.
Thandizo laukadaulo likupezeka kudzera mu webtsamba pa: www.microchip.com/support
Chitetezo cha Microchip Devices Code (Funsani Funso)
Zindikirani tsatanetsatane wotsatira wa chitetezo cha code pazinthu za Microchip:
- Zogulitsa za Microchip zimakwaniritsa zomwe zili mu Microchip Data Sheet yawo.
- Microchip imakhulupirira kuti katundu wake ndi wotetezeka akagwiritsidwa ntchito m'njira yomwe akufuna, malinga ndi momwe amagwirira ntchito, komanso m'mikhalidwe yabwinobwino.
- Ma Microchip amawakonda ndikuteteza mwamphamvu ufulu wake wazinthu zamaluso. Kuyesa kuphwanya malamulo otetezedwa ndi zinthu za Microchip ndikoletsedwa ndipo zitha kuphwanya Digital Millennium Copyright Act.
- Ngakhale Microchip kapena wopanga semiconductor wina aliyense sangatsimikizire chitetezo cha code yake. Kutetezedwa kwa ma code sikutanthauza kuti tikutsimikizira kuti chinthucho ndi "chosasweka". Chitetezo cha code chikusintha nthawi zonse. Microchip yadzipereka mosalekeza kuwongolera mawonekedwe achitetezo azinthu zathu.
Chidziwitso chazamalamulo (Funsani Funso)
Bukuli ndi zambiri zomwe zili pano zitha kugwiritsidwa ntchito ndi zinthu za Microchip zokha, kuphatikiza kupanga, kuyesa, ndi kuphatikiza zinthu za Microchip ndi pulogalamu yanu. Kugwiritsa ntchito chidziwitsochi mwanjira ina iliyonse kumaphwanya mawuwa. Zambiri zokhudzana ndi kugwiritsa ntchito zida zimaperekedwa kuti zitheke ndipo zitha kulowedwa m'malo ndi zosintha. Ndi udindo wanu kuwonetsetsa kuti pulogalamu yanu ikugwirizana ndi zomwe mukufuna. Lumikizanani ndi ofesi yogulitsa za Microchip kwanuko kuti muthandizidwe zina kapena, pezani thandizo lina pa www.microchip.com/en-us/support/design-help/client-support-services.
ZIMENEZI AMAPEREKA NDI MICROCHIP "MONGA ILI". MICROCHIP SIIPEREKERA ZINTHU KAPENA ZIZINDIKIRO ZA MTIMA ULIWONSE KAYA KUTANTHAUZIRA KAPENA KUTANTHAWIRIKA, KULEMBEDWA KAPENA MWAMWAMBA, MALAMULO KAPENA ZINTHU ZINA, ZOKHUDZANA NDI CHIZINDIKIRO KUPHATIKIZAPO KOMA ZOSAKHALA PA CHENJEZO KILICHONSE, KUTENGA ZIPANGIZO, KUTENGA CHIZINDIKIRO, KUCHITIKA, NTCHITO, NTCHITO. PA CHOLINGA ENA, KAPENA ZINTHU ZOKHUDZA ZOKHUDZANA NDI MKHALIDWE WAKE, UKHALIDWE, KAPENA NTCHITO YAKE.
PAMENE MICROCHIP IDZAKHALA NDI NTCHITO PA CHIZINDIKIRO CHILICHONSE, CHAPADERA, CHILANGO, ZOCHITIKA, KAPENA ZOTSATIRA ZOTSATIRA, KUonongeka, mtengo, KAPENA NTCHITO ZONSE ZOMWE ZILI ZOKHUDZA CHIdziwitso KAPENA NTCHITO YAKE, KOMA CHIFUKWA CHIFUKWA CHOCHITIKA, ZOCHITIKA KAPENA ZOWONONGWA NDI ZOONERA. KUBWERA KWABWINO KWAMBIRI ZOLOLEZEDWA NDI MALAMULO, NDONDOMEKO YONSE YA MICROCHIP PA ZINSINSI ZONSE MU NJIRA ILIYONSE YOKHUDZANA NDI CHIdziwitso KAPENA KUKGWIRITSA NTCHITO CHOSAPYOTSA KUCHULUKA KWA ZOLIMBIKITSA, NGATI KULIPO, ZIMENE MULIPITSA CHIFUKWA CHIFUKWA CHIFUKWA CHIYANI.
Kugwiritsa ntchito zipangizo za Microchip pa chithandizo cha moyo ndi / kapena ntchito za chitetezo ndizoopsa kwa wogula, ndipo wogula akuvomera kuteteza, kubwezera ndi kusunga Microchip yopanda vuto lililonse ku zowonongeka, zodandaula, masuti, kapena ndalama zomwe zimachokera ku ntchito yotere. Palibe zilolezo zomwe zimaperekedwa, mobisa kapena mwanjira ina, pansi pa ufulu wazinthu zaukadaulo za Microchip pokhapokha zitanenedwa.
Zizindikiro (Funsani Funso)
Dzina la Microchip ndi logo, logo ya Microchip, Adaptec, AVR, logo ya AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXStylus MediaLB, megaAVR, Microsemi, Microsemi logo, MOST, MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetri , SyncServer, Tachyon, TimeSource, tinyAVR, UNI/O, Vectron, ndi XMEGA ndi zizindikiro zolembetsedwa za Microchip Technology Incorporated ku USA ndi mayiko ena.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, ProASIC Plus logo, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, ndi ZL ndi zilembo zolembetsedwa za Microchip Technology Incorporated ku USA Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching. , BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealCircuICPICS, IdealCircuICPICS, Pulogalamu, IdealBridge, IdealBridgeit In. Intelligent Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE, RTAX , RTG4, SAM-ICE, Serial Quad I/O, simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Total Endurance, Trusted Time, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, ndi ZENA ndi zizindikiro za Microchip Technology Incorporated ku USA ndi mayiko ena.
SQTP ndi chizindikiro cha ntchito cha Microchip Technology Incorporated ku USA
Chizindikiro cha Adaptec, Frequency on Demand, Silicon Storage Technology, ndi Symmcom ndi zizindikilo zolembetsedwa za Microchip Technology Inc. m'maiko ena.
GestIC ndi chizindikiro cholembetsedwa cha Microchip Technology Germany II GmbH & Co. KG, kampani ya Microchip Technology Inc., m'maiko ena.
Zizindikiro zina zonse zomwe zatchulidwa pano ndi zamakampani awo.
© 2023, Microchip Technology Incorporated ndi mabungwe ake. Maumwini onse ndi otetezedwa. ISBN: 978-1-6683-2140-9
Quality Management System (Funsani Funso)
Kuti mudziwe zambiri za Microchip's Quality Management Systems, chonde pitani www.microchip.com/quality.
Zogulitsa Padziko Lonse ndi Ntchito
| AMERICAS | ASIA/PACIFIC | ASIA/PACIFIC | ULAYA |
| Ofesi Yakampani 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Othandizira ukadaulo: www.microchip.com/support Web Adilesi: www.microchip.com Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Austin, TX Tel: 512-257-3370 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Tel: 248-848-4000 Houston, TX Tel: 281-894-5983 Indianapolis Noblesville, PA Tel: 317-773-8323 Fax: 317-773-5453 Tel: 317-536-2380 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Tel: 951-273-7800 Raleigh, NC Tel: 919-844-7510 New York, NY Tel: 631-435-6000 San Jose, CA Tel: 408-735-9110 Tel: 408-436-4270 Canada - Toronto Tel: 905-695-1980 Fax: 905-695-2078 |
Australia - Sydney Tel: 61-2-9868-6733 China - Beijing Tel: 86-10-8569-7000 China - Chengdu Tel: 86-28-8665-5511 China - Chongqing Tel: 86-23-8980-9588 China - Dongguan Tel: 86-769-8702-9880 China - Guangzhou Tel: 86-20-8755-8029 China - Hangzhou Tel: 86-571-8792-8115 China - Hong Kong SAR Tel: 852-2943-5100 China - Nanjing Tel: 86-25-8473-2460 China - Qingdao Tel: 86-532-8502-7355 China - Shanghai Tel: 86-21-3326-8000 China - Shenyang Tel: 86-24-2334-2829 China - Shenzhen Tel: 86-755-8864-2200 China - Suzhou Tel: 86-186-6233-1526 China – Wuhan Tel: 86-27-5980-5300 China - Xian Tel: 86-29-8833-7252 China - Xiamen Tel: 86-592-2388138 China - Zhuhai Tel: 86-756-3210040 |
India - Bangalore Tel: 91-80-3090-4444 India - New Delhi Tel: 91-11-4160-8631 India - Pune Tel: 91-20-4121-0141 Japan - Osaka Tel: 81-6-6152-7160 Japan - Tokyo Tel: 81-3-6880-3770 Korea - Daegu Tel: 82-53-744-4301 Korea - Seoul Tel: 82-2-554-7200 Malaysia - Kuala Lumpur Tel: 60-3-7651-7906 Malaysia - Penang Tel: 60-4-227-8870 Philippines – Manila Tel: 63-2-634-9065 Singapore Tel: 65-6334-8870 Taiwan - Hsin Chu Tel: 886-3-577-8366 Taiwan - Kaohsiung Tel: 886-7-213-7830 Taiwan - Taipei Tel: 886-2-2508-8600 Thailand - Bangkok Tel: 66-2-694-1351 Vietnam - Ho Chi Minh Tel: 84-28-5448-2100 |
Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4485-5910 Fax: 45-4485-2829 Finland - Espoo Tel: 358-9-4520-820 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Germany - Kujambula Tel: 49-8931-9700 Germany - Haan Tel: 49-2129-3766400 Germany - Heilbronn Tel: 49-7131-72400 Germany - Karlsruhe Tel: 49-721-625370 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Germany - Rosenheim Tel: 49-8031-354-560 Israel - Ra'anana Tel: 972-9-744-7705 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Italy - Padova Tel: 39-049-7625286 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Norway - Trondheim Tel: 47-72884388 Poland - Warsaw Tel: 48-22-3325737 Romania-Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Tel: 46-8-5090-4654 UK - Wokingham Tel: 44-118-921-5800 Fax: 44-118-921-5820 |
© 2023 Microchip Technology Inc.
ndi mabungwe ake
Chithunzi cha DS50003503A
Zolemba / Zothandizira
 |
MICROCHIP T-Format Interface Software [pdf] Buku Logwiritsa Ntchito MPF300T, T-Format Interface Software, Interface Software, Software |