T-Format Interface v1.1 Tataiso ea mosebelisi
Selelekela (Botsa Potso)
T-Format interface IP e etselitsoe ho fana ka sehokelo bakeng sa FPGAs ho buisana le mefuta e fapaneng e lumellanang. Tamagawa lihlahisoa tse kang li-encoder tsa rotary.
Kakaretso (Botsa Potso)
Tafole e latelang e fana ka kakaretso ea litšobotsi tsa sebopeho sa T-Format.
Lethathamo la 1. Litšobotsi tsa Sebopeho sa T-Format
| Core Version | Tokomane ena e sebetsa ho T-Format Interface v1.1. |
| Sesebelisoa se Tšehetsoeng Malapa |
|
| E tšehelitsoe Sesebelisoa Phallang | E hloka Libero® SoC v11.8 kapa ho lokolloa hamorao. |
| Ho fana ka laesense | Khoutu e felletseng e kentsoeng ea RTL e fanoe bakeng sa mantlha, e nolofalletsang mantlha hore e kenngoe ka SmartDesign. Simulation, Synthesis, le Layout li etsoa ka software ea Libero. T-Format Interface e na le laesense ya RTL e encrypted e lokelang ho rekwa ka thoko. Ho fumana lintlha tse ling, bona T-Format Interface. |
Likaroloana (Botsa Potso)
T-Format Interface e na le likarolo tse latelang tsa bohlokoa:
- E fetisetsa le ho amohela data ea serial ho tsoa karolong ea 'mele (RS-485 interface)
- E hokahanya data ho latela T-Format mme e fana ka data ena joalo ka lirejista tse baloang ke li-blocks tse latelang.
- Ho hlahloba liphoso, tse kang ho lekana, ho se lumellane ha Cyclic Redundancy Check (CRC), ho fetisa liphoso, joalo-joalo, ho tlalehoa ke sesebelisoa sa ka ntle.
- E fana ka ts'ebetso ea alamo e hlahisoang haeba palo ea liphoso e feta moeli o hlophisitsoeng.
- E fana ka likou bakeng sa block ea jenereithara ea kantle ea CRC e le hore mosebelisi a fetole polynomial ea CRC ha ho hlokahala.
Ts'ebetsong ea IP Core ho Libero Design Suite (Botsa Potso)
IP core e tlameha ho kenngoa ho IP Catalogue ea software ea Libero SoC. Sena se etsoa ka bohona ka ts'ebetso ea ntlafatso ea IP Catalog ho software ea Libero SoC, kapa IP core e jarolloa ka letsoho ho tsoa lethathamong. Hang ha IP core e kentsoe ho Libero SoC software IP Catalog, mantlha e lokisoa, e hlahisoa, 'me e behiloe ka har'a sesebelisoa sa Smart Design bakeng sa ho kenyelletsoa lethathamong la morero oa Libero.
Tšebeliso le Ts'ebetso ea Sesebelisoa (Botsa Potso)
Tafole e latelang e thathamisa tšebeliso ea sesebelisoa se sebelisetsoang T-Format Interface.
Lethathamo la 2. Tšebeliso ea T-Format Interface
| Lintlha tsa Sesebelisoa | Lisebelisoa | Tshebetso (MHz) | Li-RAM | Math Blocks | Chip Globals | |||
| Lelapa | Sesebelisoa | LUTs | DFF | LSRAM | μSRAM | |||
| PolarFire® SoC | MPFS250T | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
| PolarFire | MPF300T | 236 | 256 | 200 | 0 | 0 | 0 | 0 |
| SmartFusion® 2 | M2S150 | 248 | 256 | 200 | 0 | 0 | 0 | 0 |
Bohlokoa:
Lintlha tse tafoleng ena li nkuoa ho sebelisoa litlhophiso tse tloaelehileng tsa synthesis le sebopeho. Mohloli oa oache oa litšupiso oa CDR o ne o behiloe ho Nehetsoe ka litekanyetso tse ling tsa tlhophiso tse sa fetoheng.- Oache e thibetsoe ho 200 MHz ha e ntse e etsa tlhahlobo ea nako ho fihlela lipalo tsa ts'ebetso.
Tlhaloso ea Ts'ebetso (Botsa Potso)
Karolo ena e hlalosa lintlha tsa ts'ebetsong ea T-Format Interface.
Setšoantšo se latelang se bontša setšoantšo sa boloko sa boemo bo holimo sa T-Format Interface.
Setšoantšo sa 1-1. Setšoantšo sa Thibelo se Phahameng sa T-Format Interface IP
Bakeng sa lintlha tse felletseng ka T-Format, bona Tamagawa datha. Tafole e latelang e thathamisa litaelo tse fapaneng tse sebelisoang ho kopa data ho sesebelisoa sa kantle le mesebetsi ea bona, le palo ea libaka tsa data tse khutlisitsoeng bakeng sa taelo ka 'ngoe.
Lethathamo la 1-1. Litaelo bakeng sa Sebaka sa Taolo
| Taelo ID | Mosebetsi | Nomoro ea Libaka tsa Boitsebiso ho Frame e Amoheletsoeng |
| 0 | Rotor Angle (Boikutlo ba Lintlha) | 3 |
| 1 | Lintlha tsa Multiturn (Boitsebiso bo Bala) | 3 |
| 2 | ID ea Khouto (Boitsebiso bo Baliloeng) | 1 |
| 3 | Lintlha tsa Rotor Angle le Multiturn (Data Read) | 8 |
| 7 | Seta bocha | 3 |
| 8 | Seta bocha | 3 |
| C | Seta bocha | 3 |
Setšoantšo se latelang se bontša setšoantšo sa "block" sa boemo ba tsamaiso ea T-Format Interface.
Setšoantšo sa 1-2. Setšoantšo sa Thibelo ea Boemo ba Tsamaiso ea T-Format Interface
Setšoantšo se latelang se bonts'a setšoantšo sa block block se sebetsang sa T-Format interface.
Setšoantšo sa 1-3. Setšoantšo sa Block Block se sebetsang sa T-Format Interface IP
Ts'ebetso e 'ngoe le e' ngoe ea puisano ho T-Format e qala ka phetisetso ea Frame ea Taolo (CF) ho tsoa ho mokopi, e lateloe ke foreimi e amohetsoeng ho tsoa sesebelisoa sa kantle. Thibelo ea TF Transmitter e hlahisa data ea serial e lokelang ho romelloa ho sesebelisoa sa kantle. E boetse e hlahisa lets'oao la boikhethelo la tx_en_o le hlokoang ke li-converter tse ling tsa RS-485. Encoder e amohela data e fetisitsoeng, 'me e fetisetsa foreimi ea data ea serial ho IP, e amoheloang boema-kepeng ba rx_i ba IP block. Sebaka sa TF_CF_DET se qala ka ho lemoha sebaka sa taolo ebe se supa boleng ba ID. Bolelele ba data bo khethoa ho ipapisitsoe le boleng ba ID bo amohetsoeng, 'me likarolo tse latelang li amoheloa le ho bolokoa lirejiseteng tse fapaneng ho sebelisoa block ea TF_DATA_READ. Ka mor'a hore boitsebiso bo feletseng bo bolokehe, boitsebiso bo likarolong tsohle ntle le tšimo ea CRC bo romelloa ho thibela e ka ntle ea jenereithara ea CRC, 'me CRC e baloang e hlahisoang ke thibela ena e bapisoa le CRC e amoheloang. Liphoso tse ling le tsona lia hlahlojoa, 'me lets'oao la done_o le tiisitsoe ('1' bakeng sa potoloho e le 'ngoe ea sys_clk_i) kamora phoso e ngoe le e ngoe ea mahala.
1.1 Ho sebetsana le Phoso (Botsa Potso)
Boloko bo supa liphoso tse latelang:
- Phoso ea Parity sebakeng sa taolo se amohetseng
- Tatelano e mpe ea ho qala sebakeng sa taolo e amohetsoeng
- Molaetsa o sa phethahalang moo mohala oa RX o khomaretsoeng ho 0 kapa o khomaretsoe ho 1
- CRC e fapane lipakeng tsa data sebakeng se amoheloang sa CRC, le CRC e baloang
- Fetisetsa Liphoso tse kang phoso ea parity kapa phoso ea delimiter ho CF e fetisitsoeng, joalo ka ha e baloa ho tloha ho bit 6 le bit 7 ea boemo ba boemo (bona Tamagawa leqephe la lintlha).
Liphoso tsena, ha li khetholloa ke block, li baka hore fault counter e eketsehe. Ha boleng ba counter counter bo feta boleng bo hlophisitsoeng (bo lokiselitsoeng ho sebelisoa g_FAULT_THRESHOLD), tlhahiso ea alamo_o ea tiisoa.
Phallo ea alamo e tlosoa ha ho kenya alarm_clr_i ho phahame bakeng sa nako e le 'ngoe ea sys_clk_i. Letšoao la tf_error_o le sebelisoa ho bontša mofuta oa phoso e etsahetseng. Lintlha tsena li hlophisitsoe bocha ho 0, ha transaction e latelang e qala (start_i is
'1').
Tafole e latelang e hlalosa liphoso tse fapa-fapaneng le boemo ba tsona bo lumellanang le "tf_error_o register".
Lethathamo la 1-2. litšabo Register Tlhaloso
| Bit | Mosebetsi |
| 5 | Phoso ea TX delimiter - joalo ka ha ho bonts'itsoe ho bit 7 ea boemo ba boemo |
| 4 | Phoso ea TX parity - joalo ka ha ho bonts'itsoe ho bit 6 ea boemo ba boemo |
| 3 | Phapang ea CRC lipakeng tsa sebaka sa CRC se amohetsoeng ho tsoa ho makhoba le data e baliloeng ea CRC |
| 2 | Molaetsa o sa fellang - phoso ea delimiter e bakileng hore nako e felile |
| 1 | Tatelano e mpe ea ho qala sebakeng sa taolo e amohetseng - "0010" ha e amoheloe pele ho nako |
| 0 | Phoso ea Parity sebakeng sa taolo e amohetseng |
T-Format Interface Parameters le Interface Signals (Botsa Potso)
Karolo ena e bua ka li-parameter tse ho configurator ea T-Format Interface GUI le matšoao a I/O.
2.1 Litlhophiso tsa Tlhophiso(Botsa Potso)
Tafole e latelang e thathamisa tlhaloso ea li-parameter tsa tlhophiso tse sebelisoang ts'ebetsong ea hardware ea T-Format Interface. Tsena ke li-parameter tse akaretsang 'me lia fapana ho latela tlhoko ea kopo.
Lethathamo la 2-1. Tlhophiso Parameter
| Lebitso la Letshwao | Tlhaloso |
| g_TIMEOUT_TIME | E hlalosa nako ea nako pakeng tsa likarolo tse latellanang ka foreime ka makhetlo a mangata a nako ea sys_clk_i. |
| g_FAULT_THRESHOLD | E hlalosa boleng ba moeli oa phoso - alarm_o e boleloa ha fault counter e feta boleng bona. |
2.2 Lipontšo le Lipoelo (Botsa Potso)
Tafole e latelang e thathamisa likou tsa ho kenya le tse hlahisoang tsa T-Format Interface.
Lethathamo la 2-2. Lintho tse kenang le tse hlahisoang ke T-Format Interface
| Lebitso la Letshwao | Tataiso | Tlhaloso |
| tsosolosa_i | Kenyeletso | Lets'oao le sebetsang le tlase la asynchronous reset ho moralo |
| sys_clk_i | Kenyeletso | Oache ea Tsamaiso |
| ref_clk_i | Kenyeletso | Oache ea litšupiso, 2.5MHz* |
| qala_ke | Kenyeletso | Startsignal ho qala transaction ea T-Format - e tlameha ho ba '1' bakeng sa potoloho e le 'ngoe ea sys_clk_i |
| alamo_clr_i | Kenyeletso | Lets'oao la Clearalarm - e tlameha ho ba '1' bakeng sa seketsoana se le seng sa sys_clk_i |
| rx_ke | Kenyeletso | Tlhahisoleseding ea serial data ho tsoa ho encoder |
| crc_etsa_i | Kenyeletso | E entsoe ho tsoa ho block ea kantle ea CRC -e tlameha ho ba '1' bakeng sa potoloho e le 'ngoe ea sys_clk_i |
| cmd_ke | Kenyeletso | ID ea ControlField e tla romelloa ho encoder |
| crc_calc_i | Kenyeletso | Outputof CRC Jenereithara block e nang le likotoana tse fetotsoeng, ke hore, crc_gen(7) -> crc_calc_i (0), crc_gen(6)-> crc_calc_i(1), .. crc_gen(0)-> crc_calc_i(7) |
| tx_o | Sephetho | Sephetho sa data ho encoder |
| tx_en_o | Sephetho | Letšoao la ho nolofalletsa ho fetisa - le ea holimo ha phetiso e ntse e tsoela pele |
| entse_o | Sephetho | Letšoao le entsoeng ka transaction - ho boleloa joalo ka lebelo le bophara ba potoloho e le 'ngoe ea sys_clk_i |
| alamo_o | Sephetho | Letšoao la alamo - le hlahisoa ha palo ea liketsahalo tsa phoso e lekana le boleng bo hlophisitsoeng ho g_FAULT_THRESHOLD |
| qala_crc_o | Sephetho | Letšoao la ho qala bakeng sa thibelo ea moloko oa CRC |
| data_crc_o | Sephetho | Datafor CRC generation block - data e fanoa e le: {CF, SF, D0, D1, D2, .. D7} ntle le li-delimiters. Haeba ho na le melaetsa e mekhutšoanyane (moo ho nang le D0-D2 feela e nang le data), likarolo tse ling D3-D7 li nkuoa e le 0. |
| tf_error_o | Sephetho | Ngoliso ea phoso ea TF |
| id_o | Sephetho | Boleng ba ID ho tsoa sebakeng sa taolo ho foreimi e amohetsoeng* |
| sf_o | Sephetho | Sebaka sa boemo ho tsoa ho foreimi e amohetsoeng* |
| d0_o | Sephetho | D0field ho tsoa ho foreimi e amohetsoeng* |
| d1_o | Sephetho | D1field ho tsoa ho foreimi e amohetsoeng* |
| d2_o | Sephetho | D2field ho tsoa ho foreimi e amohetsoeng* |
| d3_o | Sephetho | D3field ho tsoa ho foreimi e amohetsoeng* |
| d4_o | Sephetho | D4field ho tsoa ho foreimi e amohetsoeng* |
| d5_o | Sephetho | D5field ho tsoa ho foreimi e amohetsoeng* |
| d6_o | Sephetho | D6field ho tsoa ho foreimi e amohetsoeng* |
| d7_o | Sephetho | D7field ho tsoa ho foreimi e amohetsoeng* |
| crc_o | Sephetho | Sebaka sa CRC ho tsoa ho foreimi e amohetsoeng* |
Hlokomela: Ho fumana lintlha tse ling, bona Tamagawa leqephe la lintlha.
Litšoantšo tsa Nako (Botsa Potso)
Karolo ena e bua ka litšoantšo tsa nako ea T-Format Interface.
Setšoantšo se latelang se bontša transaction e tloaelehileng ea T-Format. Letšoao la done_o le hlahisoa qetellong ea ts'ebetso e 'ngoe le e' ngoe ea phoso, 'me letšoao la tf_error_o le sala ho 0.
Setšoantšo sa 3-1. Setšoantšo sa Nako - Transaction e Tloaelehileng
Setšoantšo se latelang se bontša transaction ea T-Format e nang le phoso ea CRC. Letšoao la done_o ha le hlahisoe, 'me lets'oao la tf_error_o ke 8, e leng se bontšang hore ho bile le phoso ea CRC. Letšoao la done_o le hlahisoa haeba transaction e latelang e se na phoso.
Setšoantšo sa 3-2. Setšoantšo sa Nako - Phoso ea CRC
Testbench (Botsa Potso)
Benche e kopaneng ea liteko e sebelisetsoa ho netefatsa le ho lekola Sebopeho sa T-Format se bitsoang benche ea tlhahlobo ea mosebelisi. Testbench e fanoa ho hlahloba ts'ebetso ea T-Format Interface IP.
4.1 Ketsiso (Botsa Potso)
Mehato e latelang e hlalosa mokhoa oa ho etsisa mantlha ho sebelisa testbench:
- Bula sesebelisoa sa Libero SoC, tobetsa konopo ea Libero SoC Catalog, eketsa Solutions-MotorControl.
- Penya habeli T-Format Interface, ebe o tobetsa OK. Litokomane tse amanang le IP li thathamisitsoe tlas'a Documentation.
Bohlokoa: Haeba u sa bone Catalog tab ya, leba ho View Windows menu ebe o tobetsa Catalog ho etsa hore e bonahale.
Setšoantšo sa 4-1. T-Format Interface IP Core ho Libero SoC Catalog
- Ho Stimulus Hierarchy tab, tobetsa ka ho le letona testbench ( t_format_interface_tb.v), supa ho Simulate Pre-Synth Design, ebe o tobetsa Open Interactively.
Bohlokoa: Haeba o sa bone tab ya Stimulus Hierarchy, leba ho View > Windows menu ebe o tobetsa Stimulus Hierarchy ho etsa hore e bonahale.
Setšoantšo sa 4-2. Ho Etsisa Moralo oa Pre-Synthesis
ModelSim e bula ka testbench file joalokaha ho bontšitsoe setšoantšong se latelang.
Setšoantšo sa 4-3. Fesetere ea Ketsiso ea ModelSim
Bohlokoa: Haeba ketsiso e sitisoa ka lebaka la moeli oa nako ea ho sebetsa o boletsoeng ho .do file, sebelisa run -all command ho phethela papiso.
Nalane ea Phetoho (Botsa Potso)
Nalane ea ntlafatso e hlalosa liphetoho tse kentsoeng tšebetsong tokomaneng. Liphetoho li thathamisitsoe ka ntlafatso, ho qala ka khatiso ea morao-rao.
Lethathamo la 5-1. Nalane ea Phetoho
| Khatiso | Letsatsi | Tlhaloso |
| A | 02/2023 | Lenane le latelang ke lethathamo la liphetoho tokollong ea A ea tokomane: • Falletse tokomane ho thempleite ea Microchip. • E ntlafalitse nomoro ea tokomane ho DS50003503A ho tloha ho 50200812. • E kentsoe 3. Litšoantšo tsa nako. • E kentsoe 4. Testbench. |
| 1.0 | 02/2018 | Revision 1.0 e bile khatiso ea pele ea tokomane ena. |
Tšehetso ea Microchip FPGA (Botsa Potso)
Sehlopha sa lihlahisoa tsa Microchip FPGA se tšehetsa lihlahisoa tsa sona ka lits'ebeletso tse fapaneng tsa tšehetso, ho kenyeletsoa Ts'ebeletso ea Bareki, Setsi sa Ts'ehetso ea Tekheniki ea Bareki, a websebaka, le liofisi tsa thekiso lefatšeng ka bophara. Bareki ba khothaletsoa ho etela lisebelisoa tsa Marang-rang tsa Microchip pele ba ikopanya le tšehetso kaha ho ka etsahala hore ebe lipotso tsa bona li se li arajoa.
Ikopanye le Setsi sa Tšehetso ea Setsebi ka ho website at www.microchip.com/support. Bolela nomoro ea Karolo ea Sesebelisoa sa FPGA, khetha mofuta o nepahetseng oa linyeoe, 'me u hlophise moralo files ha u ntse u theha nyeoe ea tšehetso ea tekheniki.
Ikopanye le Tshebeletso ya Bareki bakeng sa tshehetso ya dihlahiswa tseo e seng tsa botekgeniki, jwalo ka ditheko tsa sehlahiswa, dintlafatso tsa sehlahiswa, tlhahisoleseding e ntjhafatsa, boemo ba odara, le tumello.
- Ho tsoa Amerika Leboea, letsetsa 800.262.1060
- Ho tsoa lefats'eng lohle, letsetsa 650.318.4460
- Fax, ho tsoa kae kapa kae lefatšeng, 650.318.8044
Boitsebiso ba Microchip (Botsa Potso)
Microchip Websebaka(Botsa Potso)
Microchip e fana ka tšehetso ea inthaneteng ka rona website at www.microchip.com/. Sena websebaka se sebedisoang ho etsa files le tlhahisoleseding e fumaneha habonolo ho bareki. Tse ling tsa litaba tse fumanehang li kenyelletsa:
- Tšehetso ea Sehlahisoa - Lipampiri tsa data le errata, lintlha tsa kopo le sample mananeo, lisebelisoa tsa moralo, litataiso tsa basebelisi le litokomane tsa tšehetso ea hardware, lintlafatso tsa morao-rao tsa software le li-archived software
- Tšehetso e Akaretsang ea Tekheniki - Lipotso Tse Botsoang Khafetsa (FAQs), likopo tsa tšehetso ea tekheniki, lihlopha tsa lipuisano tsa inthaneteng, lethathamo la litho tsa lenaneo la balekane ba Microchip
- Khoebo ea Microchip - Mokhethoa oa lihlahisoa le litataiso tsa ho odara, likhatiso tsa morao-rao tsa khatiso tsa Microchip, lethathamo la lithupelo le liketsahalo, lethathamo la liofisi tsa thekiso ea Microchip, barekisi le baemeli ba feme.
Ts'ebeletso ea Tsebiso ea Phetoho ea Sehlahisoa (Botsa Potso)
Ts'ebeletso ea tsebiso ea phetoho ea sehlahisoa sa Microchip e thusa ho boloka bareki ba le teng ka lihlahisoa tsa Microchip. Ba ngolisitseng ba tla fumana tsebiso ea lengolo-tsoibila neng kapa neng ha ho na le liphetoho, lintlafatso, lintlafatso kapa liphoso tse amanang le sehlahisoa se itseng sa lelapa kapa sesebelisoa sa ntlafatso sa thahasello.
Ho ngodisa, eya ho www.microchip.com/pcn mme o latele ditaelo tsa ngodiso.
Tšehetso ea Bareki (Botsa Potso)
Basebelisi ba lihlahisoa tsa Microchip ba ka fumana thuso ka likanale tse 'maloa:
- Morekisi kapa Moemedi
- Ofisi ea Thekiso ea Lehae
- Embedded Solutions Engineer (ESE)
- Tšehetso ea tekheniki
Bareki ba lokela ho ikopanya le mofani oa bona oa thepa, moemeli kapa ESE bakeng sa tšehetso. Liofisi tsa thekiso ea lehae le tsona li teng ho thusa bareki. Lethathamo la liofisi tsa thekiso le libaka li kenyelelitsoe tokomaneng ena.
Tšehetso ea tekheniki e fumaneha ka ho websebaka ho: www.microchip.com/support
Karolo ea Tšireletso ea Khoutu ea Lisebelisoa tsa Microchip (Botsa Potso)
Ela hloko lintlha tse latelang tsa ts'ireletso ea khoutu lihlahisoa tsa Microchip:
- Lihlahisoa tsa Microchip li kopana le litlhaloso tse fumanehang ho Microchip Data Sheet ea bona.
- Microchip e lumela hore lihlahisoa tsa eona li sireletsehile ha li sebelisoa ka mokhoa o reriloeng, ka har'a litlhaloso tsa ts'ebetso, le tlas'a maemo a tloaelehileng.
- E boloka boleng ba Microchip mme ka mabifi e sireletsa litokelo tsa eona tsa thepa ea mahlale. Boiteko ba ho tlola likarolo tsa ts'ireletso ea khoutu ea sehlahisoa sa Microchip bo thibetsoe ka thata 'me bo ka tlola Molao oa Copyright oa Millennium oa Digital.
- Ha ho Microchip kapa moetsi ofe kapa ofe oa semiconductor ea ka netefatsang ts'ireletso ea khoutu ea eona. Tšireletso ea khoutu ha e bolele hore re tiisa hore sehlahisoa "se ke ke sa robeha". Tšireletso ea khoutu e lula e fetoha. Microchip e ikemiselitse ho tsoela pele ho ntlafatsa likarolo tsa ts'ireletso ea khoutu ea lihlahisoa tsa rona.
Tsebiso ea Molao (Botsa Potso)
Khatiso ena le lintlha tse mona li ka sebelisoa feela le lihlahisoa tsa Microchip, ho kenyeletsoa ho rala, ho leka, le ho kopanya lihlahisoa tsa Microchip le kopo ea hau. Tšebeliso ea tlhahisoleseling ena ka tsela efe kapa efe e tlola melaoana ena. Lintlha mabapi le lits'ebetso tsa sesebelisoa li fanoe molemong oa hau feela 'me li ka nkeloa sebaka ke liapdeite. Ke boikarabello ba hau ho netefatsa hore kopo ea hau e kopana le litlhaloso tsa hau. Ikopanye le ofisi ea thekiso ea Microchip ea lehae bakeng sa tšehetso e eketsehileng kapa, fumana tšehetso e eketsehileng ho www.microchip.com/en-us/support/design-help/client-support-services.
TSEBISO ENA E FUMANA KE MICROCHIP "JOALOKAHA E LE". MICROCHIP HA E ETSE LITLHAKISO KAPA LITIISETSO TSA MOFUTA OFE kapa O fe Ebang E BONAHALA KAPA E BONAHALA, E NGOLOA KAPA MOLOMO, MOLAO KAPA HO SE EMONG, E Amanang le LITSEBISO HO kenyeletsoa EMPA E SA FUMANE LE TIISETSO EFE KAPA EFE E FUMANEHLENG LE TLAMELO. BAKENG SA MORERO O KHETHEHILENG, KAPA LITIISETSO TSE AMANG LE MAEMO A OONA, BOLEMO, KAPA KETSAHALO EA OONA.
HA HO LE TSATSAHALO, MICROCHIP E TLA BA MOTHO OA MOLATO BAKENG SA LITABA LIFE, TSE KHETHEHILENG, TSA KOTSI, TSATSAHALO, KAPA TAHLEHELO E LATELANG, TŠENYEHO, LITŠEnyehelo, KAPA LITJEHO TSA MOFUTA OFE O TLANG LE LITSEBISO KAPA TŠEBELETSO EA LONA, LE HO KA ETSAHALA KETSAHALO E ETSANG. TSE KA E KA ETSAHANG KAPA MESEKO E BONAHALA. HO FIHLELA KA HO FETISISA HO DUMELLA KE MOLAO, BOIKARABELO KAOFELA BA MICROCHIP HO LIKELETSO KAOFELA KA TSELA EFE KAPA E MABAPI LE TSEBISO KAPA TŠEBELETSO EA YONA E KE KE E FEELA BOLIMO OA LITEFO, HA E LE TSE LE FELA, TSEO U LI LEFILENG KA THOTLHALA BAKENG SA MICROCHIP.
Tšebeliso ea lisebelisoa tsa Microchip ts'ehetso ea bophelo le/kapa lits'ebetso tsa ts'ireletso e kotsing ea moreki, 'me moreki o lumela ho sireletsa, ho qosa le ho boloka Microchip e se nang kotsi ho tsoa lits'enyehelo tsohle, likopo, lisutu, kapa litšenyehelo tse bakoang ke ts'ebeliso e joalo. Ha ho lilaesense tse fetisoang, ka mokhoa o hlakileng kapa ka tsela e 'ngoe, tlasa litokelo life kapa life tsa thepa ea mahlale a Microchip ntle le ha ho boletsoe ka tsela e ngoe.
Matšoao a khoebo (Botsa Potso)
Lebitso le logo ea Microchip, logo ea Microchip, Adaptec, AVR, logo ea AVR, AVR Freaks, BesTime, BitCloud, CryptoMemory, CryptoRF, dsPIC, flexPWR, HELDO, IGLOO, JukeBlox, KeeLoq, Kleer, LANCheck, LinkMD, maXSty Media, Micrologos, Micrologo, MOXSty , MOST logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32 logo, PolarFire, Prochip Designer, QTouch, SAM-BA, SenGenuity, SpyNIC, SST, SST Logo, SuperFlash, Symmetricom, SyncServer, Tachyon, tradeSource ea XME, Tichyon, TradeSource ea XME ea UNITED, UNITED TRADING, TXME, TEKSTO, TEKNOX, TEKS E kenyelelitsoe USA le linaheng tse ling.
AgileSwitch, APT, ClockWorks, The Embedded Control Solutions Company, EtherSynch, Flashtec, Hyper Speed Control, HyperLight Load, Libero, motorBench, mTouch, Powermite 3, Precision Edge, ProASIC, ProASIC Plus, logo ea ProASIC Plus, Quiet- Wire, SmartFusion, SyncWorld, Temux, TimeCesium, TimeHub, TimePictra, TimeProvider, TrueTime, le ZL ke matshwao a kgwebo a ngodisitsweng a Microchip Technology Incorporated in the USA Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any Capacitor, AnyIn, AnyOut, Augmented Switching. , BlueSky, BodyCom, Clockstudio, CodeGuard, CryptoAuthentication, CryptoAutomotive, CryptoCompanion, CryptoController, dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM, ECAN, Espresso T1S, EtherGREEN, GridTime, IdealCirnet, serialBridgeit In-Programme, IdealCircuridgeit In-Serial, serialBridgeit In-Series IntelliMOS Paralleling, IntelliMOS, Inter-Chip Connectivity, JitterBlocker, Knob-on-Display, KoD, maxCrypto, maxView, memBrain, Mindi, MiWi, MPASM, MPF, MPLAB Certified logo, MPLIB, MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation, PICDEM, PICDEM.net, PICkit, PICtail, PowerSmart, PureSilicon, QMatrix, REAL ICE/Serial ICE, Ripple ICE/Serial ICE simpleMAP, SimpliPHY, SmartBuffer, SmartHLS, SMART-IS, storClad, SQI, SuperSwitcher, SuperSwitcher II, Switchtec, SynchroPHY, Kakaretso ea Mamello, Nako e Tšeptjoang, TSHARC, USBCheck, VariSense, VectorBlox, VeriPHY, ViewSpan, WiperLock, XpressConnect, le ZENA ke matshwao a kgwebo a Microchip Technology Incorporated USA le dinaheng tse ding.
SQTP ke letšoao la ts'ebeletso la Microchip Technology Incorporated USA
Letšoao la Adaptec, Frequency on Demand, Silicon Storage Technology, le Symmcom ke matšoao a ngolisitsoeng a khoebo a Microchip Technology Inc. linaheng tse ling.
GestIC ke letshwao la kgwebo le ngodisitsweng la Microchip Technology Germany II GmbH & Co. KG, e leng lekala la Microchip Technology Inc., dinaheng tse ding.
Matšoao a mang kaofela a boletsoeng mona ke thepa ea lik'hamphani tse fapaneng.
© 2023, Microchip Technology Incorporated le lithuso tsa eona. Litokelo tsohle li sirelelitsoe. ISBN: 978-1-6683-2140-9
Tsamaiso ea Tsamaiso ea Boleng (Botsa Potso)
Ho fumana leseli mabapi le Tsamaiso ea Tsamaiso ea Boleng ea Microchip, ka kopo etela www.microchip.com/quality.
Lithekiso le Tšebeletso ea Lefatše Lohle
| LIMAKASE | ASIA/PACIFIC | ASIA/PACIFIC | ULAYA |
| Ofisi ea Khoebo 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Mohala: 480-792-7200 Fax: 480-792-7277 Tšehetso ea tekheniki: www.microchip.com/support Web Aterese: www.microchip.com Atlanta Duluth, GA Mohala: 678-957-9614 Fax: 678-957-1455 Austin, TX Mohala: 512-257-3370 Boston Westborough, MA Mohala: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Mohala: 630-285-0071 Fax: 630-285-0075 Dallas Addison, TX Mohala: 972-818-7423 Fax: 972-818-2924 Detroit Novi, MI Mohala: 248-848-4000 Houston, TX Mohala: 281-894-5983 Indianapolis Noblesville, IN Mohala: 317-773-8323 Fax: 317-773-5453 Mohala: 317-536-2380 Los Angeles Mission Viejo, CA Mohala: 949-462-9523 Fax: 949-462-9608 Mohala: 951-273-7800 Raleigh, NC Mohala: 919-844-7510 New York, NY Mohala: 631-435-6000 San Jose, CA Mohala: 408-735-9110 Mohala: 408-436-4270 Canada - Toronto Mohala: 905-695-1980 Fax: 905-695-2078 |
Australia - Sydney Mohala: 61-2-9868-6733 China - Beijing Mohala: 86-10-8569-7000 China - Chengdu Mohala: 86-28-8665-5511 China - Chongqing Mohala: 86-23-8980-9588 China - Dongguan Mohala: 86-769-8702-9880 China - Guangzhou Mohala: 86-20-8755-8029 China - Hangzhou Mohala: 86-571-8792-8115 China - Hong Kong SAR Mohala: 852-2943-5100 China - Nanjing Mohala: 86-25-8473-2460 China - Qingdao Mohala: 86-532-8502-7355 China - Shanghai Mohala: 86-21-3326-8000 China - Shenyang Mohala: 86-24-2334-2829 China - Shenzhen Mohala: 86-755-8864-2200 China - Suzhou Mohala: 86-186-6233-1526 China – Wuhan Mohala: 86-27-5980-5300 China - Xian Mohala: 86-29-8833-7252 China - Xiamen Mohala: 86-592-2388138 China - Zhuhai Mohala: 86-756-3210040 |
India - Bangalore Mohala: 91-80-3090-4444 India - New Delhi Mohala: 91-11-4160-8631 India - Pune Mohala: 91-20-4121-0141 Japane - Osaka Mohala: 81-6-6152-7160 Japane - Tokyo Mohala: 81-3-6880-3770 Korea - Daegu Mohala: 82-53-744-4301 Korea - Seoul Mohala: 82-2-554-7200 Malaysia - Kuala Lumpur Mohala: 60-3-7651-7906 Malaysia - Penang Mohala: 60-4-227-8870 Philippines – Manila Mohala: 63-2-634-9065 Singapore Mohala: 65-6334-8870 Taiwan - Hsin Chu Mohala: 886-3-577-8366 Taiwan - Kaohsiung Mohala: 886-7-213-7830 Taiwan - Taipei Mohala: 886-2-2508-8600 Thailand - Bangkok Mohala: 66-2-694-1351 Vietnam - Ho Chi Minh Mohala: 84-28-5448-2100 |
Austria - Wels Mohala: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Mohala: 45-4485-5910 Fax: 45-4485-2829 Finland - Espoo Mohala: 358-9-4520-820 Fora - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Jeremane - Ho khabisa Mohala: 49-8931-9700 Jeremane - Haan Mohala: 49-2129-3766400 Jeremane - Heilbronn Mohala: 49-7131-72400 Jeremane - Karlsruhe Mohala: 49-721-625370 Jeremane - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Jeremane - Rosenheim Mohala: 49-8031-354-560 Iseraele - Ra'anana Mohala: 972-9-744-7705 Italy - Milan Mohala: 39-0331-742611 Fax: 39-0331-466781 Italy - Padova Mohala: 39-049-7625286 Netherlands - Drunen Mohala: 31-416-690399 Fax: 31-416-690340 Norway - Trondheim Mohala: 47-72884388 Poland - Warsaw Mohala: 48-22-3325737 Romania - Bucharest Tel: 40-21-407-87-50 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 Sweden - Gothenberg Tel: 46-31-704-60-40 Sweden - Stockholm Mohala: 46-8-5090-4654 UK - Wokingham Mohala: 44-118-921-5800 Fax: 44-118-921-5820 |
© 2023 Microchip Technology Inc.
le makalana a eona
DS50003503A-leqephe la 18
Litokomane / Lisebelisoa
 |
MICROCHIP T-Format Interface Software [pdf] Bukana ea Mosebelisi MPF300T, T-Format Interface Software, Interface Software, Software |