GSI ELECTRONICS RPIRM0 Raspberry Pi RM0 Module
Installation Guide for Raspberry Pi RM0 Module Integration
Injongo
Injongo yolu xwebhu kukubonelela ngolwazi malunga nendlela yokusebenzisa iRaspberry Pi RM0 njengemodyuli yerediyo xa idityaniswa kwimveliso yomkhosi.
Ukudityaniswa okungafanelekanga okanye ukusetyenziswa kunokwaphula imigaqo yokuthotyelwa oku kuthetha ukuba kufuneka kwakhona uqinisekiso.
Inkcazo yemodyuli
Imodyuli yeRaspberry Pi RM0 ine-IEEE 802.11b/g/n/ac 1×1 WLAN, iBluetooth 5 kunye neBluetooth LE imodyuli esekelwe kwi-chip ye-43455. Imodyuli yenzelwe ukuba inyuswe kwi-PCB ibe yimveliso yenginginya. Imodyuli kufuneka ibekwe kwindawo efanelekileyo ukuqinisekisa ukusebenza kukanomathotholo akuthotywanga. Imodyuli kufuneka isetyenziswe nge-eriyali evunywe kwangaphambili kuphela.
Ukudityaniswa kwiiMveliso
Imodyuli kunye nokubekwa kwe-antenna
Umgama wokwahlula ongaphezulu kwe-20cm uya kuhlala ugciniwe phakathi kwe-eriyali kunye naso nasiphi na esinye isidluliseli sikanomathotholo ukuba sifakwe kwimveliso enye.
Naluphi na unikezelo lwamandla lwangaphandle lwe-5V kufuneka lunikezelwe kwimodyuli kwaye luya kuhambelana nemimiselo efanelekileyo kunye nemigangatho esebenzayo kwilizwe ekujoliswe kulo.
Naliphi na ixesha apho nayiphi na inxalenye yebhodi inokuthi iguqulwe njengoko oku kuya kwenza nawuphi na umsebenzi okhoyo wokuthotyelwa. Soloko udibana neengcali zokuthobela imithetho malunga nokudibanisa le modyuli kwimveliso ukuqinisekisa ukuba zonke izatifikethi ziyagcinwa.
Ulwazi lwe-antenna
Imodyuli ivunyiwe ukuba isebenze kunye ne-eriyali kwibhodi yokusingatha; i-Dual band (2.4GHz kunye ne-5GHz) PCB niche uyilo lwe-eriyali enikwe ilayisenisi evela kwiProant enePeak Gain: 2.4GHz 3.5dBi, 5GHz 2.3dBi okanye i-eriyali yesabhokhwe yangaphandle (inzuzo ephezulu ye-2dBi). Kubalulekile ukuba i-eriyali ibekwe kwindawo efanelekileyo ngaphakathi kwemveliso yokusingatha ukuqinisekisa ukusebenza ngokufanelekileyo. Musa ukubeka kufutshane necasing yentsimbi.
I-RM0 inenani lee-eriyali ezikhethiweyo ezikhethiweyo, kufuneka unamathele ngokungqongqo kuyilo oluvunywe kwangaphambili lwe-eriyali, nakuphi na ukutenxa kuya kuphazamisa iziqinisekiso zemodyuli. Iinketho zezi;
- I-antenna ye-Niche ebhodini ngoqhagamshelo oluthe ngqo ukusuka kwiModyuli ukuya kuyilo lwe-eriyali. Kufuneka ulandele izikhokelo zoyilo lwe-eriyali.
- I-Antenna ye-Niche ebhodini eqhagamshelwe kwi-RF yokutshintsha (inombolo ye-Skyworks Part SKY13351-378LF), tshintshela ngokuthe ngqo kwiModyuli. Kufuneka ulandele izikhokelo zoyilo lwe-eriyali.
- I-Antenna (Umvelisi; I-Raspberry Pi Inombolo yecandelo YH2400-5800-SMA-108) iqhagamshelwe kwikhonkco ye-UFL (Taoglas RECE.20279.001E.01) iqhagamshelwe kwi-RF switch (inombolo ye-Skyworks Ingxenye ye-SKY13351-378LF) idityaniswe ngqo kwimodyuli ye-RM0. Ifoto eboniswe ngezantsi
- Awunakho ukutenxa kuyo nayiphi na indawo yoluhlu oluchaziweyo lwe-eriyali.
Indlela eya kwisidibanisi se-UFL okanye iTshintsho kufuneka ibe yi-50ohms impedance, kunye nokuthunga okufanelekileyo kweGround nge-vias ecaleni kwendlela yomkhondo. Ubude bomkhondo kufuneka bugcinwe buncinci, ukubeka imodyuli kunye ne-eriyali kufutshane. Kuphephe ukukhupha umkhondo wemveliso yeRF phezu kwazo naziphi na ezinye iisignali okanye iinqwelo-moya zombane, ubhekiselele kwiGround kuphela kuphawu lweRF.
Izikhokelo ze-antenna zeNiche zingezantsi, ukusebenzisa uyilo kufuneka ube nelayisensi yoyilo oluvela kwiProant AB. Yonke imilinganiselo kufuneka ilandelwe, i cutout ikhona kuzo zonke iileya zePCB.
I-eriyali kufuneka ibekwe emphethweni we-PCB, kunye nesiseko esifanelekileyo esijikeleze imilo. I-Antenna ibandakanya umgca we-RF feed (uhanjiswa njenge-50ohms impedance) kunye ne-cutout kwi-Ground copper. Ukuqinisekisa ukuba uyilo lusebenza ngokuchanekileyo kufuneka uthabathe iploti yokwenziwa kwalo kwaye ubale inzuzo eyincopho ukuqinisekisa ukuba ukuphunyezwa akudluli kwimida echaziweyo kolu xwebhu. Ngexesha lemveliso ukusebenza kwe-eriyali kufuneka kuqinisekiswe ngokulinganisa amandla aphumayo asasaziweyo ngamaxesha amiselweyo.
Ukuvavanya ukuhlanganiswa kokugqibela kuya kufuneka ufumane uvavanyo lwamva nje files ukusuka compliance@raspberrypi.com
Nakuphi na ukutenxa (ii) kwiiparamitha ezichaziweyo zomkhondo we-eriyali, njengoko ichazwe yimiyalelo, ifuna ukuba umenzi wemveliso yomkhosi (umhlanganisi) kufuneka azise umntu onikwe imodyuli (iRaspberry Pi) ukuba banqwenela ukutshintsha uyilo lokulandelela i-eriyali. Kule meko, i-Class II yesicelo sokutshintsha imvume kufuneka ibe filed ngumxhasi, okanye umenzi womkhosi unokuthatha uxanduva ngotshintsho lwe-ID ye-FCC (isicelo esitsha) inkqubo elandelwa sisicelo sokutshintsha kwe-Discovery yeDidi.
Isidluliseli semodyuli kuphela iFCC egunyaziswe kumacandelo athile omthetho (okt, imithetho yesidluliseli seFCC) edweliswe kwisibonelelo, kwaye umenzi wemveliso yomkhosi unoxanduva lokuthobela nayiphi na eminye imithetho yeFCC esebenzayo kumamkeli ongagutyungelwanga sisidluliseli semodyuli. ukunikezelwa kwesiqinisekiso. Ukuba umxhasi uthengisa imveliso yakhe njengeSigaba se-15 seCandelo B elithobelayo (xa likwaqulathe ukujikelezwa kwedijithali ngokungeyonjongo). Imveliso yokugqibela yomamkeli zisafuna iCandelo le-15 lovavanyo lokuthotyelwa kweCandelo B elinemodyuli yothumelo efakiweyo.
Phelisa ukuleyibhelishwa kweMveliso
Ileyibhile iza kufakwa kumphandle wazo zonke iimveliso eziqulathe imodyuli yeRaspberry Pi RM0. Ileyibhile mayibe nala magama “Iqulathe i-FCC ID: 2AFLZRPIRM0” (yeFCC) kunye ne-“Contains IC: 11880A-RPIRM0” (ye-ISED).
FCC
Raspberry Pi RM0 FCC ID: 2AFLZRPIRM0
Esi sixhobo sithobela iCandelo le-15 leMithetho yeFCC, ukusebenza kuxhomekeke kwiimeko ezimbini ezilandelayo:
- Esi sixhobo asinakubanga uphazamiseko oluyingozi, kunye
- Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo oluquka uphazamiseko olubangela ukusebenza okungafunekiyo.
Isilumkiso: Any changes or modifications to the equipment not expressly approved by the party responsible for compliance could void user s authority to operate the equipment.
Esi sixhobo sivavanyiwe kwaye safunyanwa ukuba sithobela ngaphakathi kwimida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa, sisebenzisa, kwaye sinokusasaza amandla erediyo yerediyo kwaye, ukuba asifakanga kwaye sisetyenziswa ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:
- Jongisa kwakhona okanye uhambise i-eriyali efumanayo
- Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli
- Qhagamshela izixhobo kwi-outlet kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona
- Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.
Kwiimveliso ezifumaneka kwimakethi yase-USA/Canada, kuphela amajelo 1 ukuya kwi-11 afumanekayo kwi-2.4GHz WLAN
Esi sixhobo kunye nee-eriyali zaso akufuneki zibekwe kwindawo enye okanye zisebenze kunye nayo nayiphi na enye i-eriyali okanye isidluliseli ngaphandle kokuhambelana neenkqubo ze-FCC zothumelo oluninzi.
Esi sixhobo sisebenza kudederhu lwe-5.15~5.25GHz kwaye sithintelwe kusetyenziso lwangaphakathi kuphela.
INQAKU ELIBALULEKILEYO
FCC Radiation Exposure Statement; Co-location of this module with other transmitter that operate simultaneously are required to be evaluated using the FCC multi- transmitter procedures.
This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The host device will contain an antenna and must be installed to so that a separation distance of at least 20cm from all persons.
Kwiimveliso ezifumanekayo kwimarike yase-USA/eCanada, kuphela amajelo e-1 ukuya kwi-11 afumaneka kwi-2.4GHz WLAN Ukukhethwa kwamanye amajelo akwenzeki.
Esi sixhobo kunye nee-eriyali zaso akufuneki zibekwe kunye nazo naziphi na ezinye ii-transmitter ngaphandle kokuhambelana neenkqubo ze-IC multi-transmitter product.
IINKCUKACHA ZOKUHLANGANISWA KWE-OEM
Luxanduva lomenzi wemveliso ye-OEM / i-Host ukuqinisekisa ukuthotyelwa okuqhubekayo kwi-FCC kunye ne-ISED yeemfuno zesatifikethi saseCanada emva kokuba imodyuli idityaniswe kwimveliso ye-Host. Nceda ubhekisele kwiFCC KDB 996369 D04 ngolwazi olongezelelweyo.
Imodyuli ixhomekeke kula macandelo omgaqo weFCC alandelayo: 15.207, 15.209, 15.247, 15.403 kunye ne-15.407
Isaziso esiBalulekileyo kwii-OEMs:
Umbhalo weFCC Icandelo le-15 kufuneka lihambe kwimveliso yoMamkeli ngaphandle kokuba imveliso incinci kakhulu ukuxhasa ileyibhile enombhalo kuyo. Akwamkelekanga ukubeka nje okubhaliweyo kwisikhokelo somsebenzisi.
I-E-Labelling
Kuyenzeka ukuba imveliso ye-Host isebenzise i-e-labelling enikezela ngemveliso yoMmkeli ixhasa iimfuno zeFCC KDB 784748 D02 e labeling kunye ne-ISED Canada RSS-Gen, icandelo 4.4.
I-E-labelling iya kusebenza kwi-ID yeFCC, inombolo yesatifikethi yase-ISED yaseKhanada kunye nesiqendu se-FCC se-15.
Utshintsho kwiMiqathango yosetyenziso lwale Modyuli
Esi sixhobo samkelwe njengesixhobo esiphathwayo ngokuhambelana neFCC kunye ne-ISED yaseCanada. Oku kuthetha ukuba kufuneka kubekho umgama wokwahlula ubuncinane oyi-20cm phakathi kwe-eriyali yeModyuli kunye nabo nabaphi na abantu.
Utshintsho kusetyenziso olubandakanya umgama wokwahlula ≤20cm (ukusetyenziswa okuphathekayo) phakathi kwe-eriyali yeModyuli kunye nabaphi na abantu lutshintsho ekuvezweni kweRF kwimodyuli kwaye, ngenxa yoko, ixhomekeke kuLuhlu lweFCC loDidi lwesi-2 oluVumayo kunye neKlasi yaseCanada yase-ISED. 4 Umgaqo-nkqubo we-Permissive Change ngokuhambelana neFCC KDB 996396 D01 kunye ne-ISED Canada RSP-100.
- Njengoko kuphawuliwe ngasentla, Esi sixhobo kunye nee-eriyali zaso akufuneki zibe kwindawo enye kunye nazo naziphi na ezinye ii-transmitter ngaphandle kokuhambelana neenkqubo ze-IC zemveliso ezininzi zothutho.
- Ukuba isixhobo sidityaniswe kunye nee-eriyali ezininzi, imodyuli ingaba phantsi kweFCC Class 2 Permissive Change kunye ne-ISED Canada Class 4 Permissive Change policy ngokuhambelana neFCC KDB 996396 D01 kunye ne-ISED Canada RSP-100.
- Ngokuhambelana neFCC KDB 996369 D03, icandelo 2.9, ulwazi lwemowudi yovavanyo luyafumaneka kumvelisi weModyuli yoMququzeleli (OEM) umenzi wemveliso.
- Ukusetyenziswa kwazo naziphi na ezinye ii-eriyali ngaphandle kwezo zichazwe kwicandelo lesi-4 lesi sikhokelo sofakelo zixhomekeke kwiimfuno zotshintsho ezivumayo zeFCC kunye ne-ISED Canada.
Amaxwebhu / Izibonelelo
 |
GSI ELECTRONICS RPIRM0 Raspberry Pi RM0 Module [pdf] Incwadi yoMnini 2AFLZRPIRM0, RPIRM0 Raspberry Pi RM0 Module, RPIRM0, Raspberry Pi RM0 Module, Pi RM0 Module, Module |
