GSI ELECTRONICS RPIRM0 Rasberi Pi RM0 Module
Jagoran Shigarwa don Haɗin Module na Rasberi Pi RM0
Manufar
Manufar wannan daftarin aiki shine don samar da bayanai kan yadda ake amfani da Rasberi Pi RM0 azaman tsarin rediyo lokacin haɗawa cikin samfur mai ɗaukar nauyi.
Haɗin da ba daidai ba ko amfani na iya ɓata ƙa'idodin bin doka ma'ana ƙila a buƙaci sake sheda.
Bayanin Module
Tsarin Rasberi Pi RM0 yana da IEEE 802.11b/g/n/ac 1 × 1 WLAN, Bluetooth 5 da Bluetooth LE module dangane da guntu 43455. An ƙirƙiri tsarin don a saka shi zuwa PCB cikin samfur mai ɗaukar nauyi. Dole ne a sanya tsarin a wuri mai dacewa don tabbatar da cewa aikin rediyo bai lalace ba. Dole ne a yi amfani da ƙirar tare da eriya da aka riga aka yarda da ita kawai.
Haɗin kai cikin Samfura
Module & Wurin Antenna
Za a kiyaye tazarar keɓe fiye da 20cm koyaushe tsakanin eriya da kowane mai watsa rediyo idan an shigar dashi a cikin samfuri ɗaya.
Duk wani wutar lantarki na waje na 5V ya kamata a ba shi zuwa tsarin kuma zai bi ƙa'idodi da ƙa'idodi masu dacewa a cikin ƙasar da aka yi niyya.
Babu wani lokaci da ya kamata a canza wani ɓangare na hukumar saboda wannan zai lalata duk wani aikin yarda da ake da shi. Koyaushe tuntuɓi ƙwararrun ƙwararrun ƙwararru game da haɗa wannan ƙirar cikin samfuri don tabbatar da cewa an riƙe duk takaddun shaida.
Bayanin Antenna
An yarda da tsarin don yin aiki tare da eriya a kan hukumar gudanarwa; Dual band (2.4GHz da 5GHz) PCB niche ƙirar eriya mai lasisi daga Proant tare da Peak Gain: 2.4GHz 3.5dBi, 5GHz 2.3dBi ko eriyar bulala ta waje (kololuwar riba na 2dBi). Yana da mahimmanci cewa an sanya eriya a wuri mai dacewa a cikin samfurin rundunar don tabbatar da aiki mafi kyau. Kar a sanya kusa da rumbun karfe.
RM0 yana da adadin ƙwararrun zaɓuɓɓukan eriya, dole ne ku bi ƙa'idodin eriya da aka riga aka yarda da su, kowane sabawa zai lalata takaddun takaddun samfuran. Zaɓuɓɓukan su ne;
- eriya alkuki akan jirgi tare da haɗin kai kai tsaye daga Module zuwa shimfidar eriya. Dole ne ku bi ƙa'idodin ƙira don eriya.
- Niche Eriya akan jirgin da aka haɗa zuwa madaidaicin RF mai canzawa (Lambar Sashe na Skyworks SKY13351-378LF), canzawa kai tsaye an haɗa zuwa Module. Dole ne ku bi ƙa'idodin ƙira don eriya.
- Eriya (Mai sana'a; Rasberi Pi Sashe na lambar YH2400-5800-SMA-108) an haɗa zuwa mai haɗin UFL (Taoglas RECE.20279.001E.01) da aka haɗa zuwa RF sauya (Skyworks Part Number SKY13351-378LF) kai tsaye haɗa zuwa RM0 module. Hoton da aka nuna a kasa
- Ba za ku iya karkata daga kowane ɓangare na ƙayyadadden lissafin eriya ba.
Hanyar tafiya zuwa mai haɗin UFL ko Canjawa dole ne ya kasance mai ƙarfi na 50ohms, tare da daidaitaccen ɗinkin ƙasa tare da hanyar ganowa. Ya kamata a kiyaye tsayin alamar zuwa ƙarami, tare da gano ƙirar da eriya kusa da juna. Guji karkatar da alamar fitowar RF akan kowane sigina ko jirgin sama mai ƙarfi, yin nuni da Ground kawai zuwa siginar RF.
Jagororin eriya suna ƙasa, don amfani da ƙira dole ne ku yi lasisin ƙira daga Proant AB. Duk matakan da za a bi, yanke yana nan akan duk yadudduka na PCB.
Dole ne a sanya eriya a gefen PCB, tare da ƙasa mai dacewa a kusa da siffar. Eriya ta ƙunshi layin ciyarwar RF (wanda aka zagaya azaman 50ohms impedance) da yankewa a cikin ƙasan tagulla. Don tabbatar da cewa ƙirar tana aiki daidai dole ne ka ɗauki tsarin aikin sa kuma ka ƙididdige riba mai girma don tabbatar da aiwatarwa bai wuce ƙayyadaddun iyakokin da aka bayyana a cikin wannan takaddar ba. Yayin samarwa dole ne a tabbatar da aikin eriya ta hanyar auna ƙarfin fitarwa mai haske a ƙayyadadden mitar.
Don gwada haɗakarwa ta ƙarshe za a buƙaci ku sami sabon gwaji files daga compliance@raspberrypi.com
Duk wani sabani(s) daga ma'anar ma'anar alamar eriya, kamar yadda aka bayyana ta umarnin, yana buƙatar masana'anta samfurin rundunar (mai haɗawa) dole ne ya sanar da mai ba da lambar (Raspberry Pi) cewa suna son canza ƙirar eriya. A wannan yanayin, ana buƙatar aikace-aikacen canji na Class II don zama filed ta mai bayarwa, ko masana'anta na iya ɗaukar nauyi ta hanyar canji a cikin FCC ID (sabon aikace-aikacen) tsarin da aikace-aikacen canji na Class II ke biye da shi.
Mai watsawa na yau da kullun FCC ce kaɗai ke da izini don takamaiman sassan ƙa'ida (watau, dokokin watsawa FCC) da aka jera akan tallafin, kuma cewa masana'anta samfurin suna da alhakin bin duk wasu dokokin FCC waɗanda suka shafi mai watsa shiri wanda na'urar watsawa ba ta rufe ta. bayar da takaddun shaida. Idan wanda aka ba da kyauta ya tallata samfuran su azaman Sashe na 15 Ƙaƙƙarfan Sashe na B (lokacin da kuma ya ƙunshi da'ira na dijital ba da gangan ba). Samfurin mai masaukin baki na ƙarshe har yanzu yana buƙatar gwajin yarda da Sashe na 15 Ƙaƙwalwar Ƙaƙwalwar B tare da shigar da na'urar watsawa na zamani.
Ƙarshen Lakabin Samfura
Dole ne a sanya tambarin zuwa wajen duk samfuran da ke ɗauke da tsarin Rasberi Pi RM0. Dole ne alamar ta ƙunshi kalmomin "Ya ƙunshi ID na FCC: 2AFLZRPIRM0" (na FCC) da "Ya ƙunshi IC: 11880A-RPIRM0" (na ISED).
FCC
ID na Rasberi Pi RM0 FCC ID: 2AFLZRPIRM0
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC, Ana aiwatar da aiki bisa sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu gami da tsangwama wanda ke haifar da aiki maras so.
Tsanaki: Duk wani canje-canje ko gyare-gyare ga kayan aikin da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani don sarrafa kayan.
An gwada wannan kayan aikin kuma an same shi yana aiki cikin iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar dashi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaita ko matsar da eriya mai karɓa
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa
- Haɗa kayan aiki zuwa wani kanti akan wata da'ira daban-daban daga wanda aka haɗa mai karɓa zuwa gare shi
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Don samfuran da ake samu akan kasuwar Amurka/Kanada, tashoshi 1 zuwa 11 kawai suna samuwa don 2.4GHz WLAN
Wannan na'urar da eriya (s) ba dole ne su kasance tare ko aiki tare da kowane eriya ko mai watsawa ba sai dai daidai da hanyoyin watsawa da yawa na FCC.
Wannan na'urar tana aiki a cikin kewayon mitar 5.15 ~ 5.25GHz kuma an iyakance shi zuwa cikin gida kawai.
MUHIMMAN NOTE
Bayanin Bayyanar Radiation na FCC; Ana buƙatar kimanta haɗin gwiwar wannan tsarin tare da sauran masu watsawa waɗanda ke aiki a lokaci ɗaya ta amfani da hanyoyin watsawa da yawa na FCC.
Wannan na'urar ta cika FCC RF iyakokin fiddawa da aka tsara don yanayin da ba a sarrafa shi. Na'urar za ta ƙunshi eriya kuma dole ne a shigar da ita ta yadda nisan rabuwa na aƙalla 20cm daga duk mutane.
Don samfuran da ake samu akan kasuwar Amurka/Kanada, tashoshi 1 zuwa 11 kawai suna samuwa don 2.4GHz WLAN Zaɓin sauran tashoshi ba zai yiwu ba.
Wannan na'urar da eriya (s) ba dole ba ne su kasance tare da kowane masu watsawa sai dai daidai da hanyoyin samfura da yawa na IC.
BAYANIN HADIN KAI GA OEM
Alhakin OEM / Mai watsa shiri ne na masana'anta don tabbatar da ci gaba da bin buƙatun takaddun shaida na FCC da ISED Kanada da zarar an haɗa samfurin a cikin samfurin Mai watsa shiri. Da fatan za a koma zuwa FCC KDB 996369 D04 don ƙarin bayani.
Tsarin yana ƙarƙashin sassan dokokin FCC masu zuwa: 15.207, 15.209, 15.247, 15.403 da 15.407
Muhimmiyar Sanarwa ga OEMs:
Rubutun FCC Sashi na 15 dole ne ya ci gaba kan samfurin Mai watsa shiri sai dai idan samfurin bai yi ƙanƙanta ba don tallafawa tambarin rubutu a kai. Ba a yarda kawai sanya rubutu a cikin jagorar mai amfani ba.
E-Labeling
Zai yiwu samfurin Mai watsa shiri ya yi amfani da alamar e-lakabin samar da samfurin Mai watsa shiri yana goyan bayan buƙatun FCC KDB 784748 D02 e lakabin da ISED Canada RSS-Gen, sashe 4.4.
E-lakabin zai yi aiki don ID na FCC, lambar takaddun shaida ISED Kanada da rubutu na FCC Sashe na 15.
Canje-canje a cikin Yanayin Amfani na wannan Module
An amince da wannan na'urar azaman na'urar Wayar hannu daidai da buƙatun FCC da ISED Kanada. Wannan yana nufin cewa dole ne a sami mafi ƙarancin nisa na 20cm tsakanin eriyar Module da kowane mutum.
Canjin amfani wanda ya haɗa da nisa tsakanin ≤20cm (amfani mai ɗaukar hoto) tsakanin eriyar Module da kowane mutum canji ne a cikin bayyanar RF na ƙirar kuma, saboda haka, yana ƙarƙashin FCC Class 2 Canjin Canjin Canji da Class ISED Kanada 4 Manufofin Canjin Halatta daidai da FCC KDB 996396 D01 da ISED Kanada RSP-100.
- Kamar yadda aka ambata a sama, Wannan na'urar da eriya(s) ba dole ba ne su kasance tare da kowane masu watsawa sai dai daidai da hanyoyin samfura da yawa na IC.
- Idan na'urar tana tare da eriya da yawa, ƙirar zata iya kasancewa ƙarƙashin FCC Class 2 Canjin Haɓaka da ISED Kanada Class 4 Manufar Canjin Izinin bisa ga FCC KDB 996396 D01 da ISED Canada RSP-100.
- Dangane da FCC KDB 996369 D03, sashe na 2.9, ana samun bayanin daidaitawar yanayin gwaji daga masana'anta na Module don Mai watsa shiri (OEM).
- Amfani da kowane eriya banda waɗanda aka ƙayyade a sashe na 4 na wannan jagorar shigarwa suna ƙarƙashin ƙa'idodin canjin izini na FCC da ISED Kanada.
Takardu / Albarkatu
 |
GSI ELECTRONICS RPIRM0 Rasberi Pi RM0 Module [pdf] Littafin Mai shi 2AFLZRPIRM0, RPIRM0 Raspberry Pi RM0 Module, RPIRM0, Raspberry Pi RM0 Module, Pi RM0 Module, Module |
