LECTROSONICS M2R-X Digital IEM Receiver with Encryption

* M2R-X yog ib qho kev xaiv firmware rau M2R tso cai rau encryption thiab tshem tawm cov flexlist feature thiab analog IFB peev xwm.

CEEB TOOM: Yog tias txuas lub receiver no rau microphone inputs, xws li hauv lub koob yees duab hop kev npaj, 48 V phantom hwj chim yuav tsum tau muab tua. Txwv tsis pub, kev puas tsuaj rau tus txais yuav tshwm sim.
CEEB TOOM: Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Class B cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Txoj Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, kuv yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient lossis hloov lub kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab cov khoom txais.
• Txuas cov khoom siv rau hauv lub qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Tham nrog tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua/TV rau kev pab.

M2R Digital IEM Receiver
Lub M2R Digital IEM Receiver yog ib qho compact, rugged lub cev-hnav chav tsev muab studio-qib suab zoo rau cov neeg ua yeeb yam lossis cov kws tshaj lij uas xav tau los saib xyuas cov ncauj lus kom ntxaws wirelessly. Lub M2R ntiav cov kav hlau txais xov zoo sib txawv ntawm kev hloov pauv thaum lub pob ntawv digital headers rau seamless audio. Lub receiver siv digital modulation thiab npog UHF zaus ntawm 470.100 rau 614.375 MHz.
CEEB TOOM: Qee thaj chaw muaj qee qhov kev txwv ntau zaus. Nyob ntawm kev xaiv LOCALE, SmartTune thiab Scan zaus yog:
NA: 470.100 - 614.375 MHz
EU: 470.100 - 614.375 MHz
AU: 520.000 - 614.375 MHz

Lub mloog pob ntseg yog pub los ntawm lub tso suab zoo amplifier nrog 250 mW muaj los tsav txawm tias tsis muaj lub mloog pob ntseg lossis lub mloog pob ntseg kom txaus rau qib stage kev ua haujlwm lossis lwm qhov chaw nrov nrov. Lub receiver tuaj yeem xaiv los ntawm lub tso suab, mono los ntawm sab laug lossis sab xis nkaus xwb, lossis mono los ntawm ob txoj hauv kev, muab lub zog hloov pauv raws li kev thov raws li IEM lossis IFB txais. Ib qho intuitive interface thiab kev daws teeb meem siab, xim LCD ntawm chav tsev muab cov kws ua yeeb yam thiab cov kws tshaj lij suab zoo ib yam nrog cov neeg siv kev nyiam thiab ntseeg siab.
M2R kuj siv 2-txoj kev IR sync, yog li cov ntaub ntawv los ntawm tus txais tuaj yeem xa mus rau lub tshuab xa tawm thiab yog li mus rau Wireless Designer™ Software, ntawm USB lossis Ethernet. Txoj kev no, kev npaj ntau zaus thiab kev sib koom ua ke tuaj yeem ua tiav sai thiab muaj kev ntseeg siab nrog cov ntaub ntawv ntawm RF.

Encryption
Qhov tshwj xeeb firmware version M2R-X muab AES 256 ntsis encryption. Thaum xa suab, muaj cov xwm txheej uas tsis pub lwm tus paub yog qhov tseem ceeb, xws li thaum lub sijhawm ua kis las ncaws pob, hauv chav tsev hais plaub lossis rooj sib tham ntiag tug. Tiag tiag entropic encryption yuam sij yog thawj zaug tsim los ntawm M2T-X Transmitter. Tus yuam sij yog ces synced nrog M2R-X ntawm IR chaw nres nkoj. Lub suab yuav raug encrypted thiab tsuas tuaj yeem txiav txim siab thiab hnov ​​​​yog tias ob qho tib si transmitter thiab receiver muaj tus yuam sij sib xws.

CEEB TOOM: Unencrypted firmware versions ntawm Duet system yuav tsis cuam tshuam nrog encrypted system Cheebtsam. Cheebtsam hauv ib lub kaw lus yuav tsum muaj tag nrho 2.x (unencrypted) firmware ntsia, lossis muaj tag nrho 3.x (encrypted) firmware ntsia txhawm rau ua haujlwm.

Ntse Tuning (SmartTune™)
Ib qho teeb meem tseem ceeb ntawm cov neeg siv wireless yog nrhiav kom pom tseeb kev khiav hauj lwm zaus, tshwj xeeb tshaj yog nyob rau hauv RF saturated ib puag ncig. SmartTune ™ kov yeej qhov teeb meem no los ntawm kev soj ntsuam tag nrho cov zaus muaj nyob rau hauv lub receiver lub zaus thaiv thiab kho tus receiver mus rau zaus nrog rau qhov qis tshaj RF cuam tshuam, txo cov sij hawm teeb tsa.

RF Pem Hauv Ntej-End nrog Cov Lim Lim
Kev hloov kho dav dav yog pab tau hauv kev nrhiav cov zaus meej rau kev ua haujlwm, txawm li cas los xij, nws kuj tso cai rau ntau qhov kev cuam tshuam ntau zaus nkag mus rau lub receiver. UHF zaus band, qhov twg yuav luag tag nrho cov wireless microphone tshuab ua haujlwm, muaj neeg coob coob los ntawm kev xa xov TV siab. Cov teeb liab TV muaj zog ntau dua li lub wireless microphone lossis IEM transmitter teeb liab thiab yuav nkag mus rau lub receiver txawm tias lawv nyob ntawm ntau zaus ntau dua li lub wireless. Lub zog muaj zog no zoo li lub suab nrov rau tus txais thiab muaj txiaj ntsig zoo ib yam li lub suab nrov uas tshwm sim nrog kev ua haujlwm siab ntawm lub wireless system (suab nrov tawg thiab tso tawm). Txhawm rau txo qhov kev cuam tshuam no, cov ntxaij lim dej pem hauv ntej yog xav tau nyob rau hauv lub receiver txhawm rau txhawm rau RF lub zog hauv qab thiab siab dua qhov ua haujlwm zaus.
M2R receiver ntiav ib tug xaiv zaus, taug qab lim nyob rau hauv pem hauv ntej-kawg seem (thawj Circuit Court stage tom qab tus kav hlau txais xov). Raws li kev khiav hauj lwm zaus hloov, cov ntxaij lim dej rov kho dua rau XNUMX qhov sib txawv "zones" nyob ntawm seb tus neeg nqa khoom siv zaus.

Nyob rau hauv pem hauv ntej-kawg circuitry, ib tug tuned lim yog ua raws li los ntawm ib tug amplifier thiab tom qab ntawd lwm lub lim los muab cov kev xaiv uas xav tau los cuam tshuam kev cuam tshuam, tseem muab ntau qhov kev hloov kho thiab khaws cov rhiab heev uas xav tau rau kev ua haujlwm txuas ntxiv.

Panels thiab nta

Battery Status LED

Thaum cov teeb meem roj teeb LED ntawm lub keypad glows ntsuab lub roj teeb zoo. Cov xim hloov mus rau xim liab ntawm qhov nruab nrab thaum lub sijhawm khiav. Thaum lub LED pib ntsais liab, tsuas yog ob peb feeb xwb.
Lub ntsiab lus tseeb uas lub LED tig liab yuav txawv nrog cov roj teeb hom thiab cov xwm txheej, qhov kub thiab txias thiab lub zog noj. Lub LED yog npaj los tsuas ntes koj cov xim, tsis yog qhov qhia meej ntawm lub sijhawm ntxiv.
Lub roj teeb tsis muaj zog qee zaum yuav ua rau LED ci ntsuab tam sim tom qab lub tshuab xa hluav taws xob tau qhib, tab sis nws yuav tawm sai sai mus rau qhov chaw uas LED yuav tig liab lossis lub tsev yuav tua tag nrho.

RF Txuas LED
Thaum lub teeb liab RF siv tau los ntawm lub transmitter tau txais, LED no yuav teeb xiav.

On/Off thiab Volume Knob
Tig lub tsev rau lossis tawm thiab tswj lub mloog pob ntseg suab qib.

IR (infrared) Chaw nres nkoj
Cov chaw, suav nrog zaus, cov yuam sij encryption, lub npe, limiter, hom sib xyaw, thiab lwm yam tuaj yeem hloov pauv ntawm transmitter thiab receiver. Cov ntaub ntawv scan zaus tuaj yeem xa los ntawm lub receiver mus rau lub transmitter thiab mus rau Wireless Designer software rau kev sib koom tes.

Lub mloog pob ntseg tso zis
Lub voj voog ua haujlwm siab, 3.5 hli lub tso suab tso suab yog muab rau lub mloog pob ntseg thiab lub mloog pob ntseg.

CEEB TOOM: Yog tias txuas lub receiver no rau microphone inputs, xws li hauv lub koob yees duab hop kev npaj, 48 V phantom hwj chim yuav tsum tau muab tua. Txwv tsis pub, kev puas tsuaj rau tus txais yuav tshwm sim.
Yog tias siv lub mloog pob ntseg nrog lub tshuab no, koj yuav tsum xaiv "Mono" hauv qab "Hloov pob ntseg" hauv cov ntawv qhia zaub mov. Txwv tsis pub, chav tsev yuav siv roj teeb sai heev thiab kub.

USB Chaw nres nkoj
Firmware hloov tshiab ntawm Wireless Designer tau yooj yim nrog USB chaw nres nkoj ntawm lub vaj huam sib luag sab.

Roj teeb lub thawv
Ob lub roj teeb AA tau teeb tsa raws li cim rau ntawm lub vaj huam sib luag tom qab ntawm lub receiver. Lub qhov rooj roj teeb yog hinged thiab tseem txuas nrog lub tsev.

Keyboard thiab LCD interface

• MENU/SEL khawm
  Nias lub pob no nkag mus rau hauv cov ntawv qhia zaub mov thiab xaiv cov ntawv qhia zaub mov kom nkag mus rau cov ntxaij vab tshaus teeb.
• Khawm rov qab
  Nias lub pob no rov qab mus rau cov ntawv qhia zaub mov dhau los lossis qhov screen.
• Xub khawm
  Siv los taw qhia cov ntawv qhia zaub mov. Thaum nyob rau ntawm lub vijtsam loj, UP Button yuav tig LEDs rau thiab DOWN Button yuav tua LEDs.

Txhim kho cov roj teeb

Lub hwj chim yog muab los ntawm ob lub roj teeb AA. Cov roj teeb tau txuas nrog hauv series los ntawm lub phaj hauv lub qhov rooj roj teeb. Nws tau raug pom zoo tias koj siv lithium lossis siab muaj peev xwm NiMH rechargeable roj teeb.

LCD Main Qhov rai

RF qib
Daim duab peb sab sib raug rau qhov ntsuas ntawm sab laug ntawm cov zaub. Qhov ntsuas qhia tau hais tias lub zog hluav taws xob tuaj hauv microvolts, los ntawm 1 uV ntawm lub bottom mus rau 1,000 uV (1 millivolt) nyob rau sab saum toj.
CEEB TOOM: RF theem yuav tig los ntawm dawb mus rau ntsuab thaum lub teeb liab tau txais. Qhov no yog qhov qhia tsis tau txog ntawm xiav RF Txuas LED.
Kev ua ub no ntau haiv neeg
Ob lub kav hlau txais xov icons yuav hloov lub teeb nyob ntawm seb tus twg tau txais lub teeb liab muaj zog.
Battery life indicator
Lub roj teeb lub neej icon yog qhov ntsuas kwv yees ntawm lub roj teeb uas tseem tshuav. Rau qhov qhia tau tseeb tshaj plaws, tus neeg siv yuav tsum xaiv "Battery Type" hauv cov ntawv qhia zaub mov thiab xaiv Alkaline lossis Lithium.
Suab qib
Daim duab bar no qhia txog qib ntawm lub suab nkag mus rau hauv lub transmitter. Qhov "0" yog hais txog qib siv, raws li tau xaiv hauv lub transmitter, piv txwv li yog +4 dBu lossis -10 dBV.
Mixer hom
Qhia tias hom khoom siv twg raug xaiv rau tus txais. (Saib nplooj 10.)

Navigating Menus

Los ntawm Main Qhov rai, nias MENU/SEL nkag mus rau hauv cov ntawv qhia zaub mov, tom qab ntawd taug qab nrog UP thiab DOWN cov xub los qhia txog cov khoom teeb tsa xav tau. Nias MENU/SEL kom nkag mus rau qhov screen teeb rau cov khoom ntawd. Xa mus rau daim ntawv qhia zaub mov ntawm nplooj ntawv nram qab no.

M2R-X LCD zaub qhia zaub mov

Cov txheej txheem teeb tsa

Kauj Ruam 1) Nruab cov roj teeb
Txhim kho cov roj teeb raws li daim duab kos rau sab nraum qab ntawm lub tsev. Lub qhov rooj roj teeb ua rau kev sib txuas ntawm ob lub roj teeb. Nws tau raug pom zoo tias koj siv lithium lossis siab muaj peev xwm NiMH rechargeable roj teeb.

Kauj ruam 2) Qhib lub hwj chim
Fais fab rau ntawm M2R nrog rau On / Off / Volume knob thiab xaiv hom roj teeb hauv cov ntawv qhia zaub mov. Txheeb xyuas BATT LED ntawm lub vaj huam sib luag tswj kom paub tseeb tias muaj lub zog txaus. LED yuav ci ntsuab nrog cov roj teeb zoo.

Kauj Ruam 3) Nrhiav thiab Teem Kom Muaj Zaus Nrho
Ib qhov meej meej tuaj yeem nyob thiab teeb tsa siv SmartTune muaj nuj nqi, lossis nrog phau ntawv txheeb xyuas cov spectrum thiab xaiv qhov zaus.
Siv SmartTune

• SmartTune yuav luam theej duab tag nrho cov kev hloov kho ntawm lub receiver thiab pom qhov tseeb zaus rau kev ua haujlwm. Nkag mus rau SmartTune hauv cov ntawv qhia zaub mov thiab nias MENU/SEL. Lub receiver yuav luam theej duab lub spectrum thiab tso saib thiab teem ib tug meej zaus.
• Tom qab ntawd qhov tseeb zaus yuav tsum raug xa mus rau lossis teeb tsa ntawm cov khoom sib txuas (saib Kauj Ruam 4).

Phau ntawv Scanning

• Nkag mus rau Scan hauv LCD zaub mov thiab nias MENU/SEL. Lub scanning yuav txuas ntxiv hla lub spectrum thiab tom qab ntawd qhwv rov qab thiab pib dua. Cia lub scan kom tiav tsawg kawg ib zaug. Yog tias koj cia qhov kev soj ntsuam txuas ntxiv mus qhwv thiab rov ua dua, cov txiaj ntsig scanning yuav sib sau ua ke thiab tuaj yeem txheeb xyuas cov cim RF uas tsis sib xws thiab tej zaum yuav plam nrog ib qho scan.
• Nias MENU/SELECT kom nres lub scan. Siv cov UP thiab DOWN cov xub txhawm rau kho tus neeg txais los ntawm kev txav tus cursor mus rau qhov qhib zaus.
• Nias MENU/SELECT dua los ua kom zoom rau kev kho kom zoo thiab siv UP thiab DOWN cov xub los hla cov spectrum mus rau qhov chaw uas tsis muaj RF ua haujlwm me me (qhib zaus). Thaum qhov qhib zaus tau raug xaiv, nias lub pob rov qab rau qhov kev xaiv kom koj cov zaus xaiv tshiab los yog rov qab mus rau qhov zaus dhau los.

Kauj ruam 4) Xaiv tus yuam sij encryption
Xaiv hom encrytpion tseem ceeb kom phim lub transmitter.

Kauj ruam 5) Sync nrog lub Transmitter
Nyob rau hauv lub transmitter, siv "GET FREQ" lossis "GET ALL" hauv cov ntawv qhia zaub mov kom hloov zaus lossis lwm yam ntaub ntawv ntawm IR chaw nres nkoj. Tuav lub M2R receiver IR chaw nres nkoj ze rau pem hauv ntej vaj huam sib luag IR chaw nres nkoj ntawm lub transmitter thiab nias GO ntawm lub transmitter.

Kauj Ruam 6) Pab kom RF hauv Transmitter
Hauv cov ntawv qhia zaub mov, qhib RF thiab xaiv qhov tsim nyog RF fais fab qib. Lub xiav "txuas" LED nyob rau sab saum toj ntawm lub receiver yuav tsum teeb, qhia txog qhov siv tau RF txuas.

Kauj ruam 7) Xa Suab
Xa lub teeb liab mus rau lub transmitter thiab lub receiver audio meters yuav tsum teb. Txuas lub mloog pob ntseg los yog lub mloog pob ntseg. (Nco ntsoov pib nrog lub receiver vol-ume knob yam tsawg kawg nkaus!)

CEEB TOOM: Yog tias txuas lub receiver no rau microphone inputs, xws li hauv lub koob yees duab hop kev npaj, 48V phantom zog yuav tsum tau muab tua. Txwv tsis pub, kev puas tsuaj rau tus txais yuav tshwm sim.
Yog tias siv lub mloog pob ntseg nrog lub tshuab no, koj yuav tsum xaiv "Mono" hauv qab "Hloov pob ntseg" hauv cov ntawv qhia zaub mov. Txwv tsis pub, chav tsev yuav siv roj teeb sai heev thiab kub.

Daim ntawv qhia yam khoom piav qhia

SmartTune
SmartTune ™ automates qhov kev tshawb pom ntawm kev khiav hauj lwm ntau zaus. Nws ua qhov no los ntawm kev txheeb xyuas tag nrho cov kev khiav hauj lwm zaus nyob rau hauv lub kaw lus qhov ntau zaus thaiv ntau yam (hauv 100 kHz increments) thiab tom qab ntawd xaiv qhov zaus nrog tsawg kawg ntawm RF cuam tshuam. Thaum SmartTune ™ ua tiav, nws rov qab mus rau Lub Qhov rai Main uas qhia txog kev ua haujlwm zaus.

Luam theej duab
Siv cov kev ua haujlwm scan los txheeb xyuas cov zaus siv tau. Lub cheeb tsam hauv liab tsis tau luam tawm. Cia lub scan txuas ntxiv mus txog thaum tag nrho cov qhab tau raug luam.

Thaum tag nrho lub voj voog tau ua tiav, nias MENU / SELECT dua kom ncua lub scan.

Siv cov UP thiab DOWN cov xib xub los kho cov neeg txais los ntawm kev txav tus cursor mus rau qhov chaw qhib. Nias MENU/SELECT kom zoom rau qhov zoo.

Thaum xaiv cov zaus siv tau, nias lub pob rov qab rau qhov kev xaiv kom koj cov zaus xaiv tau tshiab lossis rov qab mus rau qhov chaw uas nws tau teeb tsa ua ntej scan.

Txhawm rau ntes cov ntaub ntawv scan no hauv lub tshuab xa tawm thiab yog li ua rau nws muaj rau tus tsim qauv wireless, siv SYNC SCAN zaub mov ua haujlwm hauv M2T Transmitter.

Ntau zaus
Tso cai rau kev xaiv ntawm kev khiav hauj lwm zaus hauv MHz thiab KHz, tunable hauv 25 kHz kauj ruam.

Vol/Bal
Qhia qhov ntim, ntawm 0 txog 100, Xauv lossis Xauv lub ntim tswj (xauv pom ntawm lub vijtsam loj) thiab kho qhov sib npaug rau sab laug, sab xis lossis nruab nrab.

Tov khoom
Qhov kev tshuaj ntsuam no tso cai rau koj xaiv lub tso suab sib xyaw, mono sib xyaw los ntawm lub suab channel 1, channel 2 lossis ob qho tib si, lossis kev cai, tso cai rau ntau qhov dav ntawm lub teeb liab thiab ntau npaum li cas ntawm txhua qhov channel.

Txwv
Limiter muaj nuj nqi tso cai rau tus neeg siv los teeb tsa ntim thiab dynamic ntau rau kev siv lub mloog pob ntseg.
Tau txais - Qhov chaw teeb tsa lub neej ntawd (0) yog cov kab, tab sis yog tias xav tau kev hloov pauv ntim, siv UP thiab DOWN ar-rows los kho lub suab los ntawm +18 dB thiab nqis mus rau -6 dB hauv 3dB cov kauj ruam.

CEEB TOOM: Kev nce qib tuaj yeem ua rau lub mloog pob ntseg nrov heev. Siv ceev faj thaum teeb tsa thiab siv.
Hnub pib – Siv cov UP thiab down xub los kho qhov pib rau kev txwv kev koom tes hauv 3dB increments.
CEEB TOOM: Ib qho kev teeb tsa los ua kom nrov nrov thiab ua kom muaj zog zoo dua me ntsis yog teeb tsa qhov pregain ntawm +6 lossis +9 dB thiab teeb tsa qhov pib rau -3 lossis -6dB.

HF Boost
Kho lub suab nrov ntawm ntau zaus hauv lub suab tso tawm raws li nyiam los ntawm listeneof 5 KHz lossis 7 KHz tuaj yeem xaiv thiab txhawb nqa.

Meter hom
Hloov cov tsos ntawm lub suab ntsuas ntsuas ntawm lub qhov rais loj; tuaj yeem pom ob qho ua ntej lossis tshaj tawm suab sib xyaw.

Clear Scan ntaub ntawv
Erases scan tshwm sim los ntawm kev nco.

Backlight
Xaiv lub sijhawm ntev ntawm lub teeb rov qab ntawm LCD nyob twj ywm qhib: Ib txwm nyob, 30 vib nas this, thiab 5 feeb.

 

LEDs Tawm
Xaiv ib txwm tig LEDs lossis Tsaus kom tig lawv tawm.

Hom roj teebXaiv hom roj teeb uas siv: Alkaline lossis Lithium yog li cov roj teeb uas tseem tshuav ntawm lub vijtsam hauv tsev kom raug raws li qhov ua tau.

 

Hom pob ntseg
Xaiv hom pob ntseg-xov tooj siv: Stereo (default) lossis Mono. Thaum Mono raug xaiv, tsis muaj suab raug pub rau txoj cai channel (ntiv nplhaib), tso cai rau siv lub mloog pob ntseg mono siv yam tsis muaj roj teeb luv luv.

Vol. Taper
Xaiv ntawm Log lossis Linear taper ntim tswj.

Xauv / Xauv
Lub vaj huam sib luag pem hauv ntej tuaj yeem raug kaw kom tsis txhob muaj kev hloov pauv tsis xav tau.

Hauv zos
North America (NA) thiab Australia (AU) muaj qee qhov kev txwv zaus, thiab qhov txwv zaus tsis muaj nyob hauv SmartTune. Thaum xaiv, cov chaw no suav nrog cov kev xaiv zaus hauv qab no hauv SmartTune:
NA: 470.100-614.375 MHz
EU: 470.100-614.375 MHz
AU: 520.000-614.375 MHz

Hais txog M2R-X
Qhia cov ntaub ntawv xov xwm dav dav txog M2R, suav nrog tus lej xov tooj thiab cov qauv rau ob qho tib si FPGA thiab lub ntsiab firmware khiav hauv lub receiver.

 

Default
Rov qab tag nrho cov chaw rau lub Hoobkas defaults raws li qhia nyob rau hauv cov lus hauv qab no.

Vol/Bal	Nruab nrab
Mixer Hom	Lub tso suab
Txwv	Pregain 0
HF Boost	0
Meter hom	Tom Qab Mix
Backlight	Ib txwm Nyob
Hom roj teeb	Lithium
Hom pob ntseg	Lub tso suab
Chaw	Xauv
Tus neeg txais lub npe	M2R IEM txais
Ntau zaus	512.00
Encryption	Depends on Locale: NA/EU 512.000 (TxA) 590.000 (TxB) AU 525.000 (TxA) 590.000 (TxB)

Encryption Key Management

M2R-X Version muaj plaub txoj kev xaiv rau cov yuam sij encryption:

• Volatile: Qhov no ib zaug xwb tus yuam sij yog qhov siab tshaj plaws ntawm kev ruaj ntseg encryption. Lub Volatile Key muaj tsuas yog ntev npaum li lub hwj chim hauv ob qho tib si M2R-X Re-ceiver thiab M2T-X Transmitter tseem nyob rau lub sijhawm ntawm ib zaug. Yog tias M2R-X raug kaw, tab sis M2T-X Transmitter tseem tau qhib, lub Volatile Key yuav tsum raug xa mus rau lub receiver dua. Yog tias lub hwj chim raug kaw ntawm M2T-X Transmitter, tag nrho cov kev sib tham xaus thiab ib qho tshiab Volatile Key yuav tsum tau tsim los ntawm lub transmitter thiab xa mus rau M2R-X ntawm IR chaw nres nkoj.
• Txheem: Standard Keys yog tshwj xeeb rau M2T-X Transmitter. Lub M2T-X tsim cov Standard Key. M2R-X Receiver yog tib lub hauv paus ntawm Standard Key, thiab vim li no, M2T-X yuav tsis tau txais (tau) ib qho Standard Keys.
• Muab faib: Muaj tus lej tsis txwv ntawm cov yuam sij sib koom muaj. Thaum tsim los ntawm M2T-X Transmitter thiab xa mus rau M2R-X, tus yuam sij encryption muaj nyob rau hauv kev sib koom (synced) los ntawm M2R-X nrog rau lwm cov encryption ca-pable transmitters / txais ntawm IR chaw nres nkoj. Thaum M2R-X tau teeb tsa rau hom tseem ceeb no, cov ntawv qhia zaub mov hu ua SEND KEY yog muaj los hloov tus yuam sij mus rau lwm lub cuab yeej.
• Universal: Qhov no yog qhov yooj yim tshaj plaws kev xaiv encryp-tion muaj. Txhua tus encryption-muaj peev xwm Lectrosonics transmitters thiab receivers muaj Universal Key. Tus yuam sij tsis tas yuav tsim los ntawm M2T-X. Tsuas yog teeb tsa Lectrosonics encryption-muaj peev xwm transmitter thiab M2R-X Re-ceiver rau Universal, thiab qhov encryption nyob rau hauv qhov chaw. Qhov no tso cai rau kev yooj yim encryption ntawm ntau lub transmitters thiab receivers, tab sis tsis muaj kev ruaj ntseg zoo li tsim ib tus yuam sij tshwj xeeb.
  CEEB TOOM: Thaum M2R-X tau teeb tsa rau Universal Encryption Key, So Key thiab Share Key yuav tsis tshwm sim hauv cov ntawv qhia zaub mov.

Hom Ntsiab

Cov yuam sij muaj yog:
• Volatile
• Txuj Ci
• Qhia tawm
• Universal

So Key

Cov ntawv qhia zaub mov no tsuas yog muaj yog tias Hom Ntsiab Cai tau teeb tsa rau Standard, Shared lossis Volatile. Xaiv Yog los so tus yuam sij tam sim no thiab pab kom M2R-X tau txais tus yuam sij tshiab.

Share Key

Cov ntawv qhia zaub mov no tsuas yog muaj yog tias Hom Ntsiab Cai tau teeb tsa rau Kev Sib Koom thiab Cov Ntsiab Lus Sib Koom tau raug xa mus rau M2R-X los ntawm M2T-X Transmitter. Nias lub UP Arrow los sync tus yuam sij encryption rau lwm tus encryption muaj peev xwm transmitter/receiver ntawm IR chaw nres nkoj. Ib qho kev ceeb toom yuav qhia yog tias tus yuam sij sync ua tiav.

Cov khoom siv

• 26895
  Hlau siv clip.
• 21926
  USB cable rau firmware hloov tshiab
• 35854 (nrog rau hauv lub thawv)
  Hex tseem ceeb wrench rau zawm screws ntawm ntim pob qhov rooj
• LRSHOE
  Cov khoom siv xaiv no suav nrog cov khoom siv uas xav tau los txhim kho M2R ntawm tus qauv khau txias uas siv cov hlua khi hlua khi uas tuaj nrog tus txais.
• P1291
  USB chaw nres nkoj plua plav npog.
• LTBATELIM
  Roj teeb Eliminator rau LT, DBu thiab DCHT transmitters, thiab M2R; lub koob yees duab hop thiab cov ntawv zoo sib xws. Kev xaiv fais fab cables suav nrog: P / N 21746 txoj cai kaum sab xis, xauv cable; 12 nti ntev P/N 21747 txoj cai kaum, xauv cable; 6 ft ntev; DCR12 / A5U universal fais fab mov rau AC zog.

Specifications

Kev khiav hauj lwm Spectrum (nyob ntawm qhov chaw):
NA: 470.100 - 614.375 MHz
EU: 470.100 - 614.375 MHz
AU: 520.000 - 614.375 MHz

Modulation Hom:
8PSK nrog Forward yuam kev kho

Latency: (tag nrho cov system)
Digital Source: 1.6 ms ntxiv rau Dante network
Analog Source: <1.4 ms
Zaus teb: 10 Hz - 12 KHz, +0, -3dB
Dynamic Range: 95 dB hnyav
Kev sib cais Channel nyob ib sab:> 85dB

Hom kev sib txawv:
Encryption: AES 256-CTR (ib FIPS 197 thiab FIPS 140-2)
Audio Output: 3.5mm lub tso suab tso suab
Lub hwj chim xav tau: 2 x AA roj teeb (3.0V)
Roj teeb lub neej: 7 teev; (2) Lithium AA roj teeb
Kev siv hluav taws xob: 1 W

Qhov Loj:
Qhov siab: 3.0 nti / 120mm. (nrog pob qhov rooj)
Dav: 2.375 nti / 60.325 mm.
Qhov tob: .625 nti / 15.875 mm.

Qhov hnyav: 9.14 ooj / 259 grams (nrog roj teeb)

Wireless Designer Software

Download tau lub Wireless Designer software installer los ntawm lub web cov chaw hauv qab SUPPORT tab ntawm: http://www.lectrosonics.com/US
Wireless Designer tsuas yog yuav tsum tau teeb tsa thawj zaug uas siv software. Thaum lub software nyob rau hauv-stalled, hloov tshiab yog muaj los ntawm tsuas yog nyem rau ntawm ib yam khoom nyob rau hauv lub Help Menu.

CEEB TOOM: Yog tias Wireless Designer twb tau teeb tsa lawm, koj yuav tsum uninstall nws ua ntej sim nruab ib daim ntawv theej tshiab.

Cov lus qhia hloov kho Firmware

firmware hloov tshiab yog ua nrog a file rub tawm ntawm lub web site thiab M2R txuas ntawm USB.
Qhov chaw nres nkoj USB ntawm lub receiver yuav tsum muaj micro-B txiv neej ntsaws rau ntawm qhov txuas txuas. Lwm qhov kawg ntawm lub cable feem ntau yuav yog USB A-Type txiv neej txuas-torto haum rau hom USB jack feem ntau siv hauv computers.
Xa mus rau Pab hauv Wireless Designer software rau cov txheej txheem.

Kev Pabcuam thiab Kho

Yog tias koj lub cev ua haujlwm tsis zoo, koj yuav tsum sim kho lossis cais qhov teeb meem ua ntej xaus tias cov khoom siv yuav tsum tau kho. Nco ntsoov tias koj tau ua raws li cov txheej txheem teeb tsa thiab cov lus qhia ua haujlwm. Txheeb xyuas cov kab txuas sib txuas.
Peb xav kom koj tsis txhob sim kho cov cuab yeej ntawm koj tus kheej thiab tsis txhob muaj lub khw kho mob hauv zos sim ua lwm yam tshaj li qhov kev kho yooj yim tshaj plaws. Yog tias qhov kev kho yog qhov nyuaj tshaj li qhov tawg ntawm cov hlau tawg lossis xoob sib txuas, xa lub tsev mus rau lub Hoobkas kho thiab kev pabcuam. Tsis txhob sim kho tej yam kev tswj hauv chav nyob. Ib zaug teem rau ntawm lub Hoobkas, ntau yam kev tswj thiab trimmers tsis drift nrog lub hnub nyoog los yog kev co thiab yeej tsis xav tau kev nyeem ntawv-txiav txim siab. Tsis muaj kev hloov kho nyob rau hauv uas yuav ua rau lub malfunctioning unit pib ua hauj lwm.
LECTROSONICS Lub Tsev Haujlwm Saib Xyuas Kev Pabcuam tau nruab thiab muaj cov neeg ua haujlwm los kho koj cov khoom siv sai sai. Nyob rau hauv warranty kho yog ua tsis tau them nqi raws li cov nqe lus ntawm lub warranty. Kev kho qhov tsis muaj kev lav phib xaub raug them ntawm tus nqi qis tshaj plaws nrog rau qhov chaw thiab xa khoom. Txij li thaum nws yuav luag ntau npaum li lub sij hawm thiab kev rau siab los txiav txim seb qhov twg yog qhov tsis raug raws li nws ua los kho, nws yog ib qho nqi them rau cov lus qhia meej. Peb yuav zoo siab los hais kwv yees tus nqi hauv xov tooj rau kev kho tsis tau lav.

Rov qab Chav Tsev rau Kho

Rau kev pabcuam raws sijhawm, thov ua raws li cov kauj ruam hauv qab no:

• A. TSIS TXHOB xa cov khoom siv rov qab mus rau lub Hoobkas kho yam tsis muaj kev tiv tauj peb ntawm e-mail lossis hauv xov tooj. Peb yuav tsum paub qhov xwm txheej ntawm qhov teeb meem, tus qauv naj npawb thiab tus lej xov tooj ntawm cov khoom siv. Peb kuj xav tau tus xov tooj uas koj tuaj yeem hu tau thaum 8 teev sawv ntxov txog 4 teev tsaus ntuj (Tebchaws Asmeskas Lub Sijhawm Roob).
• B. Tom qab tau txais koj qhov kev thov, peb yuav muab tus lej tso cai rov qab rau koj (RA). Tus lej no yuav pab kho koj sai sai ntawm peb lub chaw txais thiab kho. Tus lej tso cai rov qab yuav tsum tau qhia meej meej nyob rau sab nraud ntawm lub thawv xa khoom.
• C. Ntim cov khoom kom zoo thiab xa tuaj rau peb, shipping nqi them ua ntej. Yog tias tsim nyog, peb tuaj yeem muab cov khoom ntim khoom tsim nyog rau koj. UPS lossis FEDEX feem ntau yog txoj hauv kev zoo tshaj plaws los xa cov chav nyob. Cov chav hnyav hnyav yuav tsum yog "ob lub thawv" rau kev thauj mus los nyab xeeb.
• D. Peb kuj xav kom koj ua pov thawj cov cuab yeej, vim peb tsis tuaj yeem lav qhov kev poob lossis kev puas tsuaj rau cov khoom uas koj xa khoom. Tau kawg, peb xyuas cov khoom siv thaum peb xa rov qab rau koj.

Lectrosonics USA:

Chaw nyob xa ntawv:
Lectrosonics, Inc.
PO Box 15900
Rio Rancho, NM 87174 USA

Chaw nyob shipping:
Lectrosonics, Inc.
561 Laser Rd, Suite 102 Rio Rancho, NM 87124 USA

Xov tooj:
+1 505-892-4501 Ib
800-821-1121 Ib Hu dawb tsis pub US thiab Canada Fax +1 505-892-6243 Ib

Web:
www.lectrosonics.com

E-mail:
service.repair@lectrosonics.com
sales@lectrosonics.com

LIMITED IB xyoo lav

Cov cuab yeej raug lav rau ib xyoos txij li hnub ntawm kev yuav khoom tiv thaiv cov khoom siv lossis kev ua haujlwm tsis zoo yog tias nws tau yuav los ntawm tus neeg muag khoom tso cai. Qhov kev lees paub no tsis suav nrog cov khoom siv uas raug tsim txom lossis puas los ntawm kev tuav tsis raug lossis xa khoom. Qhov kev lees paub no tsis siv rau cov khoom siv lossis cov khoom siv ua qauv qhia.

Yog tias muaj qhov teeb meem tshwm sim, Lectrosonics, Inc. yuav, ntawm peb qhov kev xaiv, kho lossis hloov cov khoom puas yam tsis tau them nqi rau ob qho tib si lossis kev ua haujlwm. Yog tias Lectrosonics, Inc. tsis tuaj yeem kho qhov tsis xws luag hauv koj lub cuab yeej, nws yuav raug hloov pauv yam tsis tau them nqi nrog cov khoom tshiab zoo sib xws. Lectrosonics, Inc. yuav them tus nqi xa rov qab koj cov cuab yeej rau koj.

Qhov kev lees paub no tsuas yog siv rau cov khoom xa rov qab mus rau Lectrosonics, Inc. lossis tus neeg muag khoom tso cai, tus nqi thauj khoom them ua ntej, tsis pub dhau ib xyoos txij li hnub yuav khoom.

Qhov Kev Txiav Txim Siab no yog tswj hwm los ntawm txoj cai ntawm Lub Xeev New Mexico. Nws hais txog tag nrho kev lav phib xaub ntawm Lectrosonics Inc. thiab tag nrho cov kev kho mob ntawm tus neeg yuav khoom rau kev ua txhaum cai raws li tau teev tseg saum toj no. TSIS MUAJ LECTROSONICS, INC. los sis tsis muaj leej twg koom nrog hauv kev tsim khoom lossis kev xa khoom ntawm cov khoom siv yuav raug lav rau txhua qhov kev cuam tshuam, tshwj xeeb, rau txim, qhov tshwm sim, lossis kev puas tsuaj tshwm sim los ntawm kev siv los ntawm kev siv tam sim no. Cov khoom siv txawm tias LECTROSONICS, INC. tau txais kev pom zoo ntawm qhov ua tau ntawm kev puas tsuaj. YUAV TSUM TAU TXAIS KEV PAB CUAM LECTROSONICS, INC. Tshaj li tus nqi yuav khoom ntawm txhua yam khoom siv tsis raug.

Qhov kev lees paub no muab cov cai tshwj xeeb rau koj. Tej zaum koj yuav muaj txoj cai lij choj ntxiv uas txawv ntawm lub xeev mus rau ib lub xeev.

581 Laser Road NE
• Rio Rancho, NM 87124 USA
• www.lectrosonics.com
+1(505) 892-4501
• fax +1(505) 892-6243
• 800-821-1121 Ib Teb Chaws Asmeskas thiab Canada
• sales@lectrosonics.com

Cov ntaub ntawv / Cov ntaub ntawv

LECTROSONICS M2R-X Digital IEM Receiver with Encryption [ua pdf] Phau ntawv qhia M2R-X, Digital IEM Receiver with Encryption

Cov ntaub ntawv

• Cov neeg siv phau ntawv