Allen-Bradley POINT I/O 4 Channel Babban Maɗaukaki Mai Maɗaukaki Na Yanzun Jagoran Umarnin Shigar Modules
Tashar POINT I/O 4 Babban Maɗaukaki Mai Maɗaukaki Na Yanzu Jagoran Shigar Module
HANKALI: Karanta wannan daftarin aiki da takaddun da aka jera a sashin Ƙarin Albarkatun game da shigarwa, daidaitawa da aiki na wannan kayan aiki kafin shigar, daidaitawa, sarrafa ko kula da wannan samfur. Ana buƙatar masu amfani su san kansu da umarnin shigarwa da wayoyi ban da buƙatun duk lambobi, dokoki, da ƙa'idodi.
Ayyukan da suka haɗa da shigarwa, gyare-gyare, sakawa cikin sabis, amfani, taro, rarrabuwa, da kiyayewa ana buƙatar ma'aikatan da suka dace da horarwa su aiwatar da su daidai da ƙa'idar aiki. Idan an yi amfani da wannan kayan aikin ta hanyar da masana'anta ba su kayyade ba, kariya ta kayan aikin na iya lalacewa.
Muhalli da Kawaye
HANKALI: An yi nufin wannan kayan aikin don amfani da shi a cikin muhallin masana'antu na Digiri na 2 na gurɓataccen gurɓata, a cikin juzu'itage Aikace-aikacen Category II (kamar yadda aka bayyana a cikin EN/IEC 60664-1), a tsayi har zuwa 2000 m (6562 ft) ba tare da lalata ba.
Wannan kayan aikin ba a yi niyya don amfani da shi a wuraren zama ba kuma maiyuwa ba zai ba da cikakkiyar kariya ga ayyukan sadarwar rediyo a cikin irin waɗannan wuraren ba.
Ana ba da wannan kayan aikin azaman buɗaɗɗen kayan aiki don amfanin cikin gida. Dole ne a ɗora shi a cikin wani shingen da aka ƙera da kyau don waɗancan ƙayyadaddun yanayin muhalli waɗanda za su kasance kuma an tsara su yadda ya kamata don hana rauni na mutum wanda ke haifar da damar zuwa sassan rayuwa. Yakin dole ne ya kasance yana da kaddarorin da suka dace don hana ko rage yaɗuwar harshen wuta, tare da biyan ƙimar yaɗuwar harshen wuta na 5VA ko a yarda da aikace-aikacen idan ba ƙarfe ba. Dole ne a sami damar shiga ciki ta hanyar amfani da kayan aiki kawai. Sashe na gaba na wannan ɗaba'ar na iya ƙunsar ƙarin bayani game da takamaiman ƙididdiga nau'in shinge waɗanda ake buƙata don biyan wasu takaddun amincin samfur.
Baya ga wannan ɗaba'ar, duba waɗannan abubuwa:
- Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin buƙatun shigarwa.
- NEMA Standard 250 da EN/IEC 60529, kamar yadda ya dace, don bayani game da matakan kariya da aka bayar ta hanyar shinge.
Hana Fitar Electrostatic
HANKALI: Wannan kayan aiki yana kula da fitarwa na lantarki, wanda zai iya haifar da lalacewa na ciki kuma ya shafi aiki na al'ada. Bi waɗannan jagororin lokacin da kuke sarrafa wannan kayan aiki:
- Taɓa ƙasan abu don fitar da yuwuwar a tsaye.
- Saka madaidaicin madaurin wuyan hannu.
- Kar a taɓa masu haɗawa ko fil akan allunan abubuwan da suka shafi abubuwa.
- Kar a taɓa abubuwan da'ira a cikin kayan aiki.
- Yi amfani da madaidaicin wurin aiki, idan akwai.
- Ajiye kayan aiki a cikin marufi mai aminci a tsaye lokacin da ba a amfani da shi.
Amincewa da Wuri Mai Haɗari na Arewacin Amurka
Bayanin mai zuwa yana aiki lokacin aiki da wannan kayan aiki a wurare masu haɗari.
Kayayyakin da aka yiwa alama "CL I, DIV 2, GP A, B, C, D" sun dace don amfani a cikin Rukunin Class I Division 2 A, B, C, D, Wurare masu haɗari da wurare marasa haɗari kawai. Ana ba da kowane samfur tare da alamomi akan farantin suna mai nuni da lambar yanayin zafin wuri mai haɗari. Lokacin haɗa samfura a cikin tsarin, ƙila a yi amfani da lambar mafi ƙarancin zafin jiki (lambar “T” mafi ƙasƙanci) don taimakawa ƙayyadaddun lambar yanayin yanayin gabaɗayan tsarin. Haɗin kayan aiki a cikin tsarin ku ana ƙarƙashin bincike daga Hukumar da ke da iko a lokacin shigarwa.
GARGADI:
Hadarin fashewa -
- Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
- Kar a cire haɗin haɗi zuwa wannan kayan aikin sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari. Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
- Sauya abubuwan da aka gyara na iya lalata dacewa ga Class I, Division 2.
HANKALI: Don yin biyayya da hane-hane na UL, ikon filin da duk na'urorin da aka haɗa dole ne a yi amfani da su daga tushe guda ɗaya mai yarda da masu zuwa: Class 2
Yarda da Wuri Mai Haɗari na Burtaniya da Turai
Mai zuwa ya shafi samfuran da aka yiwa alama II 3G:
- An yi nufin amfani da su a cikin yanayi mai yuwuwar fashewa kamar yadda tsarin UKEX 2016 No. 1107 da Dokar Tarayyar Turai 2014/34/EU suka ayyana kuma an gano su bi Mahimman Bukatun Lafiya da Tsaro waɗanda suka shafi ƙira da gina kayan aikin Category 3 da aka nufa. don amfani a cikin Yanki 2 mai yuwuwar fashewar yanayi, da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na wannan Umurnin.
- An tabbatar da bin Mahimman Bukatun Kiwon lafiya da Tsaro ta hanyar bin EN IEC 60079-7, da EN IEC 60079-0.
- Rukunin Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayan Kayanka na 3, kuma suna bin Mahimman Bukatun Lafiya da Tsaro da suka shafi ƙira da gina irin waɗannan kayan aikin da aka bayar a cikin Jadawalin 1 na UKEX da Annex II na EU Directive 2014/34/EU. Duba UKEx da EU Declaration of Conformity a rok.auto/certifications don cikakkun bayanai.
- Nau'in kariyar ita ce Ex ec IIC T4 Gc bisa ga EN IEC 60079-0: 2018, ATMOSPHERES FASAHA - KASHI NA 0: KAYAN AIKI - BUKATAR JAMA'A, Ranar fitowa 07/2018, da CENELEC EN IEC 60079-7: 2015A , Fashewar yanayi. Kariyar kayan aiki ta ƙarin aminci "e".
- Daidaita daidaitattun EN IEC 60079-0: 2018, ATMOSPHERES masu fashewa - Sashe na 0: Kayayyakin - Bukatun Gabaɗaya, Ranar fitowa 07/2018, da CENELEC EN IEC 60079- 7: 2015A. Kariyar kayan aiki ta ƙara aminci "e", lambar takardar shedar DEMKO 1 ATEX 2018X da UL04UKEX0330347X.
- An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar yankin 2 bisa ga ka'idar UKEX 2016 No. 1107 da ATEX umarnin 2014/34/EU.
- Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.
Amincewar Wuri Mai Haɗari IEC
Abubuwan da ke biyowa sun shafi samfuran da takaddun shaida na IECEx:
- An yi nufin amfani da su a wuraren da iskar gas, tururi, hazo, ko iska ba zai iya faruwa ba, ko kuma zai iya faruwa ba safai ba kuma na ɗan gajeren lokaci. Irin waɗannan wuraren sun dace da rarrabuwar Yanki 2 zuwa IEC 60079-0.
- Nau'in kariyar shine Ex eC IIC T4 Gc bisa ga IEC 60079-0 da IEC 60079-7.
- Bincika ka'idoji IEC 60079-0 Abubuwan fashewa - Kashi na 0: Kayan aiki - Abubuwan buƙatu gabaɗaya, Edition 7, Ranar Bita 2017 da IEC 60079-7 ", lambar takardar shaidar IECEx IECEx UL 5.1X.
- Ana iya samun lambobi na kasida da “K” ke biye da su don nuna zaɓin suturar da ta dace.
GARGADI:
- Wannan kayan aikin za a yi amfani da shi a cikin ƙayyadaddun ƙimar da Rockwell Automation ya ayyana.
- Kiyaye duk wani haɗin waje na waje wanda ya haɗu da wannan kayan aiki ta amfani da sukurori, latches na zamewa, masu haɗin zaren, ko wasu hanyoyin samar da wannan samfur.
- Kar a cire haɗin kayan aiki sai dai idan an cire wuta ko kuma an san yankin ba shi da haɗari.
HANKALI:
- Wannan kayan aikin baya juriya ga hasken rana ko wasu tushen hasken UV.
- Idan ana amfani da wannan kayan aikin ta hanyar da masana'antun basu bayyana ba, kariyar da kayan aikin ke bayarwa na iya nakasa.
Sharuɗɗa na Musamman don Amintaccen Amfani
GARGADI:
- Wannan kayan aikin za a ɗora shi a cikin ƙayyadaddun shinge na UKEX / ATEX / IECEx 2 tare da ƙaramin ƙimar kariya ta ingress na aƙalla IP54 (daidai da EN/IEC 60079-0) kuma a yi amfani da shi a cikin yanayin da bai wuce Digiri na 2 ba kamar yadda aka ayyana a cikin EN/IEC 60664-1) lokacin da aka yi amfani da shi a cikin mahalli na Zone 2. Dole ne a sami damar shiga wurin ta amfani da kayan aiki kawai.
- Dole ne a samar da kariya ta wucin gadi wacce aka saita a matakin da bai wuce 140% na mafi girman ƙimar vol.tage a tashoshin samar da kayan aiki.
- Dole ne a yi amfani da wannan kayan aikin tare da UKEX/ATEX/IECEx bokan Rockwell Automation backplanes.
- Ana samun ƙasa ta hanyar hawan kayayyaki akan dogo.
- Don module 1734-IE4C, dole ne a yi amfani da masu gudanarwa tare da mafi ƙarancin ƙimar zafin jagora na 92 ° C.
Kafin Ka Fara
Ana iya amfani da wannan samfurin POINT I/O™ jerin C tare da masu zuwa:
- DeviceNet® da PROFIBUS adaftar
- Adaftar ControlNet® da EtherNet/IP™, ta amfani da sigar aikace-aikacen Studio 5000 Logix Designer® 20 ko kuma daga baya Duba Hoto 1 da Hoto 2 don sanin kanku da manyan sassan tsarin, lura da cewa haɗin ginin wayoyi ɗaya ne daga cikin masu zuwa:
- 1734-TB ko 1734-TBS POINT I/O tushe guda biyu, wanda ya haɗa da 1734-RTB mai cirewa mai cirewa da tushe mai hawa 1734-MB.
- 1734-TOP ko 1734-TOPS POINT I/O tushe guda ɗaya
Hoto 1 - POINT I/O 4 Channel High-Density Module Input Module na yanzu tare da 1734-TB ko 1734-TBS Tushen
| Bayani | Bayani | ||
| 1 | Tsarin kulle tsarin | 6 | 1734-TB, 1734-TBS mai hawa tushe |
| 2 | Alamar rubutu mai zamewa | 7 | Yankan gefe masu tsaka |
| 3 | I/O module mai sakawa | 8 | Maɓallin injina (orange) |
| 4 | Hannun tasha mai cirewa (RTB). | 9 | DIN dogo kulle dunƙule (orange) |
| 5 | RTB tare da dunƙule ko bazara clamp | 10 | Zane-zane na wayoyi |
Hoto 2 - POINT I/O 4 Channel High-Density Module Input Module na yanzu tare da 1734-TOP ko 1734-TOPS Tushen
| Bayani | Bayani | ||
| 1 | Tsarin kulle tsarin | 6 | Yankan gefe masu tsaka |
| 2 | Alamar rubutu mai zamewa | 7 | Maɓallin injina (orange) |
| 3 | I/O module mai sakawa | 8 | DIN dogo kulle dunƙule (orange) |
| 4 | Hannun tasha mai cirewa (RTB). | 9 | Zane-zane na wayoyi |
Shigar da Dutsen Ginin
Don shigar da tushen hawa akan dogo na DIN (Lambar ɓangaren Allen-Bradley® 199-DR1; 46277-3; EN50022), ci gaba kamar haka:
HANKALI: An kafa wannan samfurin ta hanyar dogo na DIN zuwa ƙasan chassis. Yi amfani da tutiya-plated chromate passivated karfe DIN dogo don tabbatar da ingantaccen ƙasa. Amfani da sauran kayan dogo na DIN (misaliample, aluminum ko robobi) wanda zai iya lalata, oxidize, ko kuma masu jagoranci mara kyau, na iya haifar da ƙasa mara kyau ko tsaka-tsaki. Amintaccen dogo na DIN zuwa saman hawa kusan kowane 200 mm (7.8 in.) kuma amfani da anka na ƙarshe daidai. Tabbatar da saukar da layin dogo DIN yadda ya kamata. Dubi Ka'idodin Waya Automation Automation na Masana'antu, bugu 1770-4.1, don ƙarin bayani.
- Sanya tushe mai hawa a tsaye sama da raka'o'in da aka shigar (adaftar, wutar lantarki ko tsarin da ke akwai).
- Zamar da gindin hawa zuwa ƙasa yana ƙyale ɓangarorin ɓangarorin da suka haɗa juna don haɗa madaidaicin module ko adaftar.
- Latsa da ƙarfi don zaunar da gindin hawa akan dogo na DIN. Tushen hawa yana shiga cikin wuri.
- Don cire tushe mai hawa daga layin dogo na DIN, cire tsarin, kuma yi amfani da ƙaramin screwdriver don juya maɓallin kulle tushe zuwa matsayi na tsaye. Wannan yana sakin tsarin kullewa. Sannan a ɗaga kai tsaye don cirewa.
Shigar da Module
Za a iya shigar da tsarin kafin ko bayan shigarwa na tushe. Tabbatar cewa an sanya maɓalli daidai kafin shigar da tsarin a cikin gindin hawa. Bugu da kari, tabbatar da cewa dunƙule tushe mai hawa yana matsayi a kwance nuni zuwa tushe.
GARGADI: Lokacin da kuka saka ko cire samfurin yayin da wutar jirgin baya ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba. Maimaita harbin wutar lantarki yana haifar da wuce gona da iri ga lambobi a kan ma'auni da mahaɗin sa. Lambobin da suka sata na iya haifar da juriya na lantarki wanda zai iya shafar aikin ƙirar.
- Yin amfani da screwdriver mai wutsiya don juya maɓallan maɓalli akan gindin hawa agogon agogo har sai adadin da ake buƙata don nau'in module ɗin da ake shigar ya yi daidai da madaidaicin tushe.
- Tabbatar cewa DIN dogo kulle dunƙule yana cikin matsayi a kwance. idan an buɗe tsarin kulle, ba za ku iya saka tsarin ba.
- Saka tsarin kai tsaye zuwa cikin gindin hawa kuma latsa don amintattu. Module ɗin yana kulle cikin wuri.
Shigar da Tashar Tashar Mai Cire
Ana ba da Toshewar Tasha Mai Cire (RTB) tare da taron tushe na wayoyi. Don cirewa, ɗaga hannun RTB. Wannan yana ba da damar cire tushe mai hawa kuma a maye gurbinsa kamar yadda ya cancanta ba tare da cire kowane daga cikin wayoyi ba. Don sake shigar da Block ɗin Tasha Mai Cirewa, ci gaba kamar haka:
- Saka ƙarshen kishiyar hannun a cikin rukunin tushe. Wannan ƙarshen yana da sashe mai lanƙwasa wanda ke hulɗa tare da tushen wayoyi.
- Juya katangar tasha zuwa ginshiƙin wayoyi har sai ta kulle kanta a wuri.
- Idan an shigar da tsarin I/O, ƙwace riƙon RTB cikin wuri akan tsarin.
GARGADI: Lokacin da kuka haɗa ko cire haɗin Block Terminal mai Cirewa (RTB) tare da amfani da ikon gefen filin, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari.
Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
GARGADI: Don 1734-RTBS da 1734-RTB3S, don ɗaki da buɗe waya, saka screwdriver (lambar katalogi 1492-N90 - 3 mm diamita ruwa) a cikin buɗewa a kusan 73 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa). ) da turawa sama a hankali.
GARGADI: Don 1734-TOPS da 1734-TOP3S, don kwancewa da kwance waya, saka screwdriver mai laushi (lambar kasida 1492-N90 - diamita 3 mm) a cikin buɗewa a kusan 97 ° (bangaren ruwa yana layi ɗaya da saman saman buɗewa) kuma danna ciki (kada a tura sama ko ƙasa).
Cire Tushen Dutsen
Don cire tushe mai hawa, dole ne a cire duk wani tsarin da aka shigar, da kuma tsarin da aka shigar a cikin tushe zuwa dama. Cire Tushen Tasha Mai Cirewa, idan an haɗa shi.
- Cire hannun RTB akan tsarin I/O.
- Ja hannun RTB don cire Katangar Tasha Mai Cirewa.
- Latsa makullin module a saman tsarin.
- Ja kan tsarin I/O don cirewa daga tushe.
- Maimaita matakai na 1, 2, 3 da 4 don ƙirar dama.
- Yi amfani da ƙaramin screwdriver mai wutsiya don jujjuya dunƙule tushen lemu zuwa matsayi na tsaye. Wannan yana sakin tsarin kullewa.
- Ɗaga kai tsaye don cirewa.
Sanya Tushen 1734-TOPS
- Sanya tushe a tsaye sama da raka'o'in da aka shigar, kamar adaftar, wutar lantarki, ko tsarin da ke akwai.
- Zamar da gindin ƙasa, ba da damar ɓangarorin ɓangarorin da suka haɗa juna don haɗa naúrar da aka shigar kusa da ita.
- Latsa damtse don zaunar da gindin kan titin dogo na DIN har sai tushe ya kama wuri.
- Tabbatar cewa DIN dogo kulle dunƙule yana a kwance, kulle wuri kafin saka I/O module.
Cire Tushen 1734-TOPS
- Don cire tushen wiring daga DIN dogo, dole ne ka cire tsarin da aka shigar zuwa dama na tushe.
- Matse tsarin kulle module na module zuwa dama na tushe, ja sama don cire tsarin.
- Juya dunƙule makullin lemu zuwa matsayi na tsaye don buɗe tushe daga layin dogo na DIN.
- Zamar da tushe sama don sakin shi daga raka'o'in auren sa.
Waya Module
Chas Gnd = Ƙasar Chassis C = Na kowa
GARGADI: Idan kun haɗa ko cire haɗin wayoyi yayin da wutar gefen filin ke kunne, baka na lantarki na iya faruwa. Wannan zai iya haifar da fashewa a cikin ma'auni na wurare masu haɗari. Tabbatar cewa an cire wuta ko kuma yankin ba shi da haɗari kafin a ci gaba.
Tsarin Waya
(1) 1734-VTM na zaɓi ne. Yi amfani da 24V DC wadata daga 1734-VTM module don 2-waya/3-waya na'urorin.
| Tashoshi | Shigarwa na Yanzu | Na kowa | Chassis Kasa |
| 0 | 0 | 4 ko 5 | 6 ko 7 |
| 1 | 1 | ||
| 2 | 2 | ||
| 3 | 3 |
Ana samar da 12/24V DC ta bas ɗin wutar lantarki na ciki.
Sadarwa tare da Module ɗin ku
POINT I/O modules aika (ci) da karɓar (samar da) bayanan I/O (saƙonni). Kuna taswirar wannan bayanan akan ƙwaƙwalwar processor.
Wannan tsarin shigar da POINT I/O yana samar da bytes 12 na bayanan shigarwa (Scanner Rx) da bayanan halin kuskure. Baya cinye bayanan I/O (scanner Tx).
Tsohuwar Taswirar Bayanai don 1734-IE4C, 1734-IE4CK Analog Input Module
Girman saƙo: 12 Bytes
| 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 | |
| Yana samarwa (Scanner Rx) | Tashar shigarwar 0 Babban Byte | Tashar shigarwar 0 Low Byte | ||||||||||||||
| Tashar shigarwar 1 Babban Byte | Tashar shigarwar 1 Low Byte | |||||||||||||||
| Tashar shigarwar 2 Babban Byte | Tashar shigarwar 2 Low Byte | |||||||||||||||
| Tashar shigarwar 3 Babban Byte | Tashar shigarwar 3 Low Byte | |||||||||||||||
| Halin Byte don Channel 1 | Halin Byte don Channel 0 | |||||||||||||||
| OR | UR | HHA | LLA | HA | LA | CM | CF | OR | UR | HHA | LLA | HA | LA | CM | CF | |
| Halin Byte don Channel 3 | Halin Byte don Channel 2 | |||||||||||||||
| OR | UR | HHA | LLA | HA | LA | CM | CF | OR | UR | HHA | LLA | HA | LA | CM | CF | |
| Ina = Matsayin Laifin Channel; 0 = babu kuskure, 1 = kuskure = Yanayin daidaitawa; 0 = al'ada, 1 = yanayin daidaitawa LA = Ƙararrawa mara kyau; 0 = babu kuskure, 1 = kuskure = Babban Ƙararrawa; 0 = babu kuskure, 1 = Laifi LA = Ƙananan Ƙararrawa: 0 = babu kuskure, 1 = kuskure HHA = Babban Ƙararrawa / Babban Ƙararrawa; 0 = babu kuskure, 1 = kuskure UR = Rashin hankali; 0 = babu kuskure, 1 = kuskure KO = Matsakaici; 0 = babu kuskure, 1 = kuskure | ||||||||||||||||
| Abubuwan amfani (scanner Tx) | Babu bayanan da aka cinye | |||||||||||||||
Ma'anar Fassara Matsayi
Dubi Hoto na 3 da Tebu 1 don bayani kan yadda ake fassara alamomin matsayi.
Hoto 3 - Ma'anonin Matsayi don POINT I/O 4 Channel Babban Maɗaukakin Maɗaukakin Maɗaukakin Matsalolin Shigar Yanzu
- Matsayin Module
- Matsayin hanyar sadarwa
- Matsayin shigarwar 0
- Matsayin shigarwar 1
- Matsayin shigarwar 2
- Matsayin shigarwar 3
Tebur 1 - Matsayin Nuni don Module
| Mai nuna alama | Jiha | Bayani |
| Matsayin tsarin | Kashe | Babu wutar lantarki da aka yi amfani da na'urar. |
| Kore | Na'urar tana aiki kullum. | |
| Koren walƙiya | Na'urar tana buƙatar ƙaddamarwa saboda ɓacewa, rashin cikawa, ko daidaitaccen tsari. | |
| Ja mai walƙiya | Laifin mai warkewa. | |
| Ja | Laifin da ba a iya murmurewa na iya buƙatar maye gurbin na'urar. | |
| Ja/kore mai walƙiya | Na'urar tana cikin yanayin gwajin kai. |
Tebur 1 - Matsayin Nuni don Module (ci gaba)
| Mai nuna alama | Jiha | Bayani |
| Matsayin hanyar sadarwa | Kashe | Na'urar ba ta kan layi ba: - Na'urar bata kammala gwajin dup_MAC-id ba. |
| Koren walƙiya | Na'urar tana kan layi amma ba ta da haɗin kai a cikin kafaffen jihar. | |
| Kore | Na'urar tana kan layi kuma tana da haɗin gwiwa a cikin kafuwar jihar. | |
| Ja mai walƙiya | Haɗin I/O ɗaya ko fiye suna cikin ƙayyadaddun lokaci. | |
| Ja | Rashin gazawar hanyar haɗin kai - gazawar na'urar sadarwa. Na'urar ta gano kuskuren da ke hana shi sadarwa akan hanyar sadarwa. | |
| Ja/kore mai walƙiya | Na'urar sadarwa mara kyau - na'urar ta gano kuskuren samun damar hanyar sadarwa kuma tana cikin matsalar sadarwa. Na'urar ta karɓi kuma ta karɓi Buƙatun Lalacewar Sadarwar Identity - dogon saƙon yarjejeniya. | |
| Matsayin tashar | Kashe | Module a yanayin CAL. |
| M kore | Na al'ada (na'urorin binciken tashoshi). | |
| Koren walƙiya | Ana daidaita tashar. | |
| Ja mai kauri | Babu wuta ko babban laifin tasha. | |
| Ja mai walƙiya | Tashoshi a ƙarshen kewayon (0 mA ko 21mA). |
Ƙayyadaddun bayanai
MUHIMMANCI Matsakaicin sabunta shigarwar da martanin Mataki na 1734-IE4C da 1734-IE4CK kayayyaki sun bambanta da na lambar kasida 1734-IE2C da 1734-IE2CK kayayyaki.
Ƙididdigar shigarwa
| Siffa | Daraja |
| Yawan bayanai | 4, mai ƙarewa ɗaya, mara saniya, na yanzu |
| Ƙaddamarwa | 16 bits - sama da 0…21 mA0.32 µA/cnt |
| Shigar da tashar ta yanzu | 4…20mA0…20mA |
| Cikakken daidaito (1) Tashar ta yanzu | 0.1% Cikakken Sikeli @ 25 °C |
| Daidaitaccen motsi w/ temp. Terminal na yanzu | 30 ppm/°C |
| Adadin sabunta shigarwa, kowane module | 240 ms @ Notch = 50 Hz200 ms @ Notch = 60 Hz (tsoho) 120 ms @ Notch = 100 Hz100 ms @ Notch = 120 Hz 60 ms @ Notch = 200 Hz 50 ms @ Notch = 240 Hz 40 @ Notch = 300 Hz 30 400 ms @ Notch = 25 Hz 480 ms @ Notch = XNUMX Hz |
| Amsa mataki, kowane tasha | 60 ms @ Notch = 50 Hz50 ms @ Notch = 60 Hz (tsoho) 30 ms @ Notch = 100 Hz25 ms @ Notch = 120 Hz 15 ms @ Notch = 200 Hz12.5 ms @ Notch = 240 Hz 10 300 ms Hz7.5 ms @ Notch = 400 Hz6.25 ms @ Notch = 480 Hz |
| Input impedance/juriya | 60 Ω |
| Nau'in juyawa | Delta Sigma |
| Yanayin kin amincewa da yanayin gama gari | -120 dB |
Ƙayyadaddun shigarwa (Ciga gaba)
| Siffa | Daraja |
| Matsakaicin ƙi na yanayin al'ada | -60 dBnotch Filter13.1 Hz @ Notch = 50 Hz15.7 Hz @ Notch = 60 Hz (tsoho)26.2 Hz @ Notch = 100 Hz31.4 Hz @ Notch = 120 Hz52.4 Hz @ Notch = 200 Hz @ 62.9 Hz Daraja = 240 Hz78.6 Hz @ Notch = 300 Hz104.8 Hz @ Notch = 400 Hz125.7 Hz @ Notch = 480 Hz |
| Tsarin bayanai | Alamar lamba |
| Matsakaicin nauyi | An kare kuskure zuwa 28.8V DC |
| Daidaitawa | An daidaita masana'anta |
| Manuniya, bangaren dabaru | Matsayin cibiyar sadarwa 1 kore/ja 1 matsayin kore/ja module 4 yanayin shigarwar kore/ja |
(1) Ya haɗa da kashewa, riba, rashin layi, da sharuddan kuskuren maimaitawa.
MUHIMMANCI Duba Jagoran Zaɓin POINT I/O Modules, ɗaba'ar 1734-SG001 don bayani kan karya bas ɗin rarraba wutar lantarki. Dubi sassan "Lokacin da za a Yi Amfani da Mai Rarraba Wutar Wuta" da "Lokacin da za a Yi Amfani da Ƙarfin Ƙarfafawa".
Gabaɗaya Bayani
| Siffa | Daraja |
| Tushen tashar | 1734-TB3, 1734-TB3S wayoyi tushe taro |
| POINTBus™ na yanzu, max | 75 mA |
| Rashin wutar lantarki, max | 0.55W @ 28.8V DC |
| Rushewar thermal, max | 2.0 BTU/h @ 28.8V DC |
| Ƙarar voltage, bakar | 5V DC |
| Ƙarar voltage kewayon, shigar da wutar filin | 10…28.8V DC, 20mA, Class 2 |
| Shigar da halin yanzu | 4…20mA ko 0…20mA |
| Kadaici voltage | 50V, an gwada @ 1500V AC don 60s, abubuwan shigarwa, da ikon filin zuwa tsarin Babu keɓewa tsakanin abubuwan shigarwa ko abubuwan da aka haɗa zuwa ikon filin |
| Girma (H x W x D), kusan. | 56.0 x 12.0 x 75.5 mm (2.21 x 0.47 x 2.97 a cikin.) |
| Matsayin maɓalli | 3 |
| Ƙididdiga nau'in shinge | Babu (buɗaɗɗen salo) |
| Girman waya | 0.25 mm2 (22…14 AWG) m ko madaidaicin waya mai ƙima a 100 °C (212 °F), ko mafi girma, 1.2 mm (3/64 in.) max |
| Kashi na waya (1) | 2 - akan tashoshin sigina 1 - akan tashoshin wutar lantarki |
| Nau'in waya | Garkuwa |
| Matsakaicin karfin juzu'i na tushe | An ƙaddara ta hanyar toshe tasha |
| Nauyi, kimanin. | 35 g (1.235 oz) |
| Lambar yanayi ta Arewacin Amurka | T4A |
| UKEX/ATEX lambar temp | T4 |
| IECEx temp code | T4 |
(1) Yi amfani da wannan bayanin nau'in madugu don tsara tsarin tafiyar jagora kamar yadda aka bayyana a cikin Jagoran Waya Automation na Masana'antu da Grounding, ɗaba'ar 1770-4.1.
Ƙayyadaddun Muhalli
| Siffa | Daraja |
| Zazzabi, aiki | IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Gwajin Bd, Aikin Busassun Zafin), IEC 60068-2-14 (Gwajin Nb, Shock Thermal): ≤ +20°C (-55°F ≤ Ta ≤ + 4°F) |
| Zazzabi, kewaye da iska, max | 55°C (131°F) |
| Zazzabi, mara aiki | IEC 60068-2-1 (Gwajin Ab, Ba a Kunshin Sanyi Ba), IEC 60068-2-2 (Gwajin Bb, Busassun Zafin da Ba a Buɗe), IEC 60068-2-14 +40°C (-85…+40°F) |
| Dangi zafi | IEC 60068-2-30 (Gwajin Db, Ba a kunshe Damp Zafi): 5…95% rashin kwanciyar hankali |
| Jijjiga | IEC 60068-2-6, (Gwajin Fc, Aiki): 5g @ 10…500 Hz |
| Shock, aiki | IEC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshe): 30g |
| Shock, rashin aiki | IEC 60068-2-27 (Gwajin Ea, Shock Ba a Kunshe): 50g |
| Fitarwa | CISPR 11 Rukuni na 1, Class A |
| ESD rigakafi | IEC 61000-4-2: 6 kV lamba yana fitar da fitar da iska 8 kV |
| Radiated RF rigakafi | IEC 61000-4-3: 10V/m tare da 1 kHz sine-wave 80% AM daga 80… 6000 MHz |
| EFT/B rigakafi | IEC 61000-4-4: ± 3 kV a 5 kHz akan tashoshin wutar lantarki ± 3 kV a 5 kHz akan tashoshin sigina |
| Rashin rigakafi na wucin gadi | IEC 61000-4-5: ± 1 kV layin-layi (DM) da ± 2 kV layin-duniya (CM) akan tashoshin wutar lantarki ± 2 kV layin-duniya (CM) akan tashar jiragen ruwa masu kariya. |
| An gudanar da rigakafin RF | IEC 61000-4-6: 10V rms tare da 1 kHz sine-wave 80% AM @ 150 kHz… 80 MHz |
Takaddun shaida
| Takaddun shaida (lokacin da aka yiwa samfur alama)(1) | Daraja |
| c-UL-mu | UL Jerin Kayan Kayan Aikin Masana'antu, wanda aka ba da izini ga Amurka da Kanada. Duba UL File E65584.UL An jera shi don Class I, Rukuni na 2 A, B,C, D wurare masu haɗari, ƙwararrun Amurka da Kanada. Duba UL File E194810. |
| UK da CE | Kayayyakin Dokokin Burtaniya 2016 No. 1091 da Tarayyar Turai 2014/30/EU EMC Umarnin, mai yarda da: EN 61326-1; Meas./Control/Lab., Bukatun Masana'antu Sen 61000-6-2; Kariyar masana'antu EN 61000-6-4; Fitar da Masana'antu Sen 61131-2; Masu Gudanar da Shirye-shiryen (Sashe na 8, Yanki A da B) Kayayyakin Dokokin UK 2012 No. 3032 da Tarayyar Turai 2011/65/EU RoHS, mai yarda da: EN IEC 63000; Takardun fasaha |
| Ex | Kayayyakin Dokokin Burtaniya 2016 No. 1107 da Jagoran Tarayyar Turai 2014/34/EU ATEX, mai dacewa da: EN IEC 60079-0; Babban Bukatun Sen IEC 60079-7; Abubuwan fashewar abubuwa, Kariya "e" II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X |
| IECEx | Tsarin IECEx, mai yarda da 60079-0; Babban Bukatun IEC 60079-7; Abubuwan fashewar abubuwa, Kariya "e" II 3 G Ex ec IIC T4 IECEx UL 20.0072X |
| KOWANE | Ƙungiyar Kwastam ta Rasha TR CU 020/2011 EMC Dokokin Fasaha |
| RCAIM | Dokar Sadarwa ta Ostiraliya, mai yarda da: AS/NZS CISPR 11; Fitar masana'antu |
Takaddun shaida (Ci gaba)
| Takaddun shaida (lokacin da aka yiwa samfur alama)(1) | Daraja |
| KC | Rijistar Koriya na Kayan Watsa Labarai da Kayan Sadarwa, wanda ya dace da: Mataki na 58-2 na Dokar Waves Radio, Sashe na 3 |
| Maroko | Arête Ministerial n° 6404-15 du 29 Ramadan 1436 |
| CCC | CNCA-C23-01 CCC Dokokin Aiwatar da Fashe-Tabbacin Samfuran Lantarki CCC: 2020122309111607 |
(1) Duba hanyar haɗin Takaddar Samfur a rok.auto/certifications don Sanarwa na Daidaitawa, Takaddun shaida, da sauran bayanan takaddun shaida.
Tallafin Automation na Rockwell
Yi amfani da waɗannan albarkatun don samun damar bayanan tallafi.
| Cibiyar Taimakon Fasaha | Nemo taimako tare da yadda ake yin bidiyo, FAQs, taɗi, dandalin masu amfani, Ilimi, da sabunta sanarwar samfur. | rok.auto/support |
| Lambobin Taimakon Fasaha na Gida | Nemo lambar tarho don ƙasar ku. | rok.auto/phonesupport |
| Cibiyar Takardun Fasaha | Shiga cikin sauri da zazzage ƙayyadaddun fasaha, umarnin shigarwa, da littattafan mai amfani. | rok.auto/techdocs |
| Laburaren Adabi | Nemo umarnin shigarwa, littattafai, ƙasidu, da wallafe-wallafen bayanan fasaha. | rok.auto/literature |
| Dacewar Samfura da Cibiyar Zazzagewa (PCDC) | Zazzage firmware, hade files (kamar AOP, EDS, da DTM), da samun damar bayanin bayanan sakin samfur. | rok.auto/pcdc |
Bayanin Takardu
Bayanin ku yana taimaka mana samar da buƙatun takaddun ku mafi kyau. Idan kuna da wasu shawarwari kan yadda ake inganta abubuwan mu, cika fom ɗin a rok.auto/docfeedback.
Waste Electric and Electronic Equipment (WEEE)
A ƙarshen rayuwa, ya kamata a tattara wannan kayan aiki daban daga duk wani sharar gida da ba a ware ba.
Rockwell Automation yana kula da bayanan yarda da muhalli na yanzu akan sa websaiti a rok.auto/pec.
Rockwell Tricare A.Ş. Kar Plaza Markaz E Blok Kat:6 34752 , İstanbul, Tel: +90 (216) 5698400 EE
Haɗa tare da mu.
fadada yiwuwar ɗan adam®
AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 EUROPE/MIDLE EAST/AFRICA: Rockwell Automation Park Keelan 12a, 1831 Diego, Belgium, Tel: (32)2 663 0600, Fax: (32)2 663 0640 ASIA PACIFIC: Rockwell Automation, Level 14, Core F, Cyber Port 3, 100 Cyber Port Road, Hong Kong. Tel: (852) 2887 4788, Fax: (852) 2508 1846 UNITED MULKI: Rockwell Automation Ltd. Pittsfield, Kiln Farm Milton Keynes, MK11 3DR, United Kingdom, Tel: (44) (1908) 838-800, Fax 44) (1908) 261-917
Allen-Bradley, faɗaɗa yuwuwar ɗan adam, Factory Talk, POINT I/O, POINT Bus, Rockwell Automation, Studio 5000 Logix Designer, da Tech Connect alamun kasuwanci ne na Rockwell Automation, Inc. ControlNet, Na'ura Net, da Ether Net/IP alamun kasuwanci ne. Abubuwan da aka bayar na ODVA, Inc.
Alamomin kasuwanci da ba na Rockwell Automation mallakin kamfanoninsu ne.
Buga 1734-IN032F-EN-P - Satumba 2022 | Supersedes Publication 1734-IN032E-EN-P - Maris 2021 Haƙƙin mallaka © 2022 Rockwell Automation, Inc. Duk haƙƙin mallaka.
Takardu / Albarkatu
 |
Allen-Bradley POINT I/O 4 Tashoshi Babban Maɗaukakin Maɗaukakin Maɗaukakin Matsaloli na Yanzu [pdf] Jagoran Jagora 1734-IE4C. Moduloli |
