Allen-Bradley POINT I/O 4 Channel High Density Current Input Modules Phau Ntawv Qhia

POINT I/O 4 Channel High Density Current Input Module Cov lus qhia kev teeb tsa 

CEEB TOOM: Nyeem cov ntaub ntawv no thiab cov ntaub ntawv teev tseg hauv Cov Chaw Ntxiv Ntxiv txog kev teeb tsa, teeb tsa thiab kev ua haujlwm ntawm cov cuab yeej no ua ntej koj nruab, teeb tsa, khiav lag luam lossis tswj cov khoom no. Cov neeg siv yuav tsum paub lawv tus kheej nrog kev teeb tsa thiab cov lus qhia txuas ntxiv rau cov cai ntawm txhua txoj cai siv, cov cai, thiab cov qauv.

Cov dej num suav nrog kev teeb tsa, hloov kho, muab tso rau hauv kev pabcuam, siv, sib dhos, sib dhos, thiab kev saib xyuas yuav tsum tau ua los ntawm cov neeg ua haujlwm raug cob qhia kom haum raws li cov cai ntawm kev coj ua. Yog tias cov cuab yeej siv no siv tsis tau teev los ntawm cov chaw tsim khoom, kev tiv thaiv muab los ntawm cov cuab yeej yuav raug puas tsuaj.

Environment and Enclosure

CEEB TOOM: Cov cuab yeej no yog tsim los siv rau hauv Pollution Degree 2 kev lag luam ib puag ncig, nyob rau hauv overvoltage Cov ntawv thov qeb II (raws li tau hais tseg hauv EN / IEC 60664-1), ntawm qhov siab txog li 2000 m (6562 ft) yam tsis muaj derating.

Cov cuab yeej no tsis yog tsim los siv rau hauv thaj chaw nyob thiab yuav tsis muaj kev tiv thaiv txaus rau cov kev pabcuam hauv xov tooj cua hauv ib puag ncig zoo li no.

Cov cuab yeej no tau muab los ua cov cuab yeej qhib rau kev siv sab hauv tsev. Nws yuav tsum tau muab tso rau hauv ib lub thawv uas tsim nyog rau cov xwm txheej ib puag ncig tshwj xeeb uas yuav muaj thiab tsim nyog tsim los tiv thaiv tus kheej raug mob los ntawm kev nkag mus rau qhov chaw nyob. Lub kaw lus yuav tsum muaj cov khoom siv hluav taws xob tsim nyog los tiv thaiv lossis txo qis kev sib kis ntawm cov nplaim taws, ua raws li cov nplaim hluav taws kub ntawm 5VA lossis raug pom zoo rau daim ntawv thov yog tias tsis yog xim hlau. Sab hauv ntawm lub qhov rooj yuav tsum nkag tau tsuas yog los ntawm kev siv lub cuab yeej. Cov ntu tom ntej ntawm qhov kev tshaj tawm no tuaj yeem muaj cov ntaub ntawv ntau ntxiv txog cov kev ntsuas tshwj xeeb uas yuav tsum tau ua raws li qee yam khoom pov thawj kev nyab xeeb.

Ntxiv rau qhov kev tshaj tawm no, saib cov hauv qab no:

• Industrial Automation Wiring and Grounding Guidelines, luam tawm 1770-4.1, rau kev txhim kho ntxiv.
• NEMA Standard 250 thiab EN / IEC 60529, raws li muaj feem xyuam, rau kev piav qhia txog qib kev tiv thaiv muab los ntawm cov ntaub thaiv npog.

Tiv thaiv Electrostatic Discharge

CEEB TOOM: Cov cuab yeej no yog rhiab heev rau electrostatic paug, uas tuaj yeem ua rau muaj kev puas tsuaj sab hauv thiab cuam tshuam rau kev ua haujlwm ib txwm muaj. Ua raws li cov lus qhia no thaum koj ua cov cuab yeej no:

• Kov ib qho khoom siv hauv av kom tso tawm qhov zoo li qub.
• Hnav ib qho kev pom zoo grounding dab teg pluaj.
• Tsis txhob kov cov connectors lossis pins ntawm cov khoom vaj huam sib luag.
• Tsis txhob kov cov khoom siv hluav taws xob hauv cov khoom siv.
• Siv lub chaw ua haujlwm zoo li qub, yog tias muaj.
• Khaws cov khoom siv rau hauv cov ntim khoom zoo li qub thaum tsis siv.

North American Hazardous Location Pom zoo 

Cov ntaub ntawv hauv qab no siv tau thaum siv cov cuab yeej no hauv qhov chaw muaj kev phom sij.

Cov khoom uas cim "CL I, DIV 2, GP A, B, C, D" yog tsim rau siv nyob rau hauv Chav Kawm I Division 2 Pawg A, B, C, D, Chaw Teeb Meem thiab qhov chaw tsis muaj kev phom sij nkaus xwb. Txhua yam khoom yog muab nrog cov cim rau ntawm daim ntawv ntsuam xyuas lub npe uas qhia txog qhov xwm txheej kub ntxhov qhov chaw. Thaum sib txuas cov khoom nyob rau hauv ib qho system, feem ntau qhov tsis zoo kub code (tsawg "T" tus lej) yuav raug siv los pab txiav txim siab tag nrho cov ntsuas kub ntawm lub cev. Kev sib xyaw ntawm cov khoom siv hauv koj lub cev yuav raug tshawb xyuas los ntawm Lub Chaw Haujlwm Hauv Zos Muaj Kev Txiav Txim Siab thaum lub sijhawm teeb tsa.

CEEB TOOM:
Explosion Hazard –

• Tsis txhob txiav cov cuab yeej tshwj tsis yog tias lub hwj chim tau raug tshem tawm lossis qhov chaw paub tias tsis muaj kev phom sij.
• Tsis txhob txiav kev sib txuas rau cov cuab yeej no tshwj tsis yog tias lub hwj chim tau raug tshem tawm lossis thaj chaw paub tias tsis muaj kev phom sij. Ruaj ntseg ib qho kev sib txuas sab nraud uas ua phooj ywg rau cov cuab yeej no los ntawm kev siv cov ntsia hlau, zawv zawg latches, threaded connectors, los yog lwm yam uas muab nrog cov khoom no.
• Kev hloov ntawm cov khoom tuaj yeem ua rau tsis zoo rau Chav Kawm I, Division 2.

CEEB TOOM: Txhawm rau ua raws li UL txwv, lub zog hluav taws xob thiab tag nrho cov khoom siv txuas nrog yuav tsum tau siv los ntawm ib qho chaw ua raws li cov hauv qab no: Chav Kawm 2

UK thiab European Kev Pom Zoo Qhov Chaw Muaj Teeb Meem

Cov hauv qab no siv rau cov khoom cim II 3 G:

• Yog npaj rau kev siv nyob rau hauv tej huab cua uas muaj peev xwm tawg tau raws li tau hais los ntawm UKEX txoj cai 2016 No. 1107 thiab European Union Directive 2014/34/EU thiab tau pom tias ua raws li Qhov Tseem Ceeb Ntawm Kev Noj Qab Haus Huv thiab Kev Nyab Xeeb Kev Nyab Xeeb ntsig txog kev tsim thiab kev tsim kho ntawm Qeb 3 cov khoom siv npaj. siv rau hauv Cheeb Tsam 2 uas muaj feem cuam tshuam rau huab cua, muab nyob rau hauv Schedule 1 ntawm UKEX thiab Annex II ntawm Cov Lus Qhia no.
• Kev ua raws li Qhov Tseem Ceeb Kev Noj Qab Haus Huv thiab Kev Nyab Xeeb Kev Nyab Xeeb tau lees paub los ntawm kev ua raws li EN IEC 60079-7, thiab EN IEC 60079-0.
• Puas yog Cov Khoom Siv Pab Pawg II, Cov Khoom Siv 3, thiab ua raws li Cov Lus Qhia Txog Kev Noj Qab Haus Huv thiab Kev Nyab Xeeb Tseem Ceeb hais txog kev tsim thiab kev tsim cov khoom siv hauv Schedule 1 ntawm UKEX thiab Annex II ntawm EU Cov Lus Qhia 2014/34/EU. Saib UKEx thiab EU Tshaj Tawm Txog Kev Ua Raws Cai ntawm rok.auto/certifications kom paub meej.
• Hom kev tiv thaiv yog Ex ec IIC T4 Gc raws li EN IEC 60079-0: 2018, EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS, Issue Date 07/2018, thiab CENELEC EN IEC 60079-7 , Explosive atmospheres. Cov cuab yeej tiv thaiv los ntawm kev ruaj ntseg "e".
• Ua raws li tus qauv EN IEC 60079-0: 2018, EXPLOSIVE ATMOSPHERES - PART 0: EQUIPMENT - GENERAL REQUIREMENTS, Issue Date 07/2018, and CENELEC EN IEC 60079- 7: 2015 Explosive.1+A2018 Cov cuab yeej tiv thaiv los ntawm kev ruaj ntseg "e", siv daim ntawv pov thawj naj npawb DEMKO 04 ATEX 0330347X thiab UL22UKEX2478X.
• Nws yog npaj rau siv nyob rau hauv cov cheeb tsam uas explosive cua los ntawm gases, vapors, mists, los yog huab cua tsis zoo li tshwm sim, los yog tej zaum yuav tshwm sim tsis tshua muaj thiab nyob rau lub sij hawm luv luv. Cov chaw zoo li no sib haum rau Zone 2 kev faib tawm raws li UKEX txoj cai 2016 No. 1107 thiab ATEX directive 2014/34/EU.
• Tej zaum yuav muaj cov lej catalog ua raws li "K" los qhia txog kev xaiv txheej txheej.

IEC Kev Pom Zoo Qhov Chaw Zoo

Cov hauv qab no siv rau cov khoom uas muaj ntawv pov thawj IECEx:

• Nws yog npaj rau siv nyob rau hauv cov cheeb tsam uas explosive cua los ntawm gases, vapors, mists, los yog huab cua tsis zoo li tshwm sim, los yog tej zaum yuav tshwm sim tsis tshua muaj thiab nyob rau lub sij hawm luv luv. Cov chaw zoo li no sib haum rau Zone 2 kev faib tawm rau IEC 60079-0.
• Hom kev tiv thaiv yog Ex eC IIC T4 Gc raws li IEC 60079-0 thiab IEC 60079-7.
• TS EN IEC 60079-0 Cov Cuab Yeej Hluav Taws Xob - Ntu 0: Cov khoom siv - Cov kev cai dav dav, Tsab Ntawv 7, Hloov Kho Hnub Tim 2017 thiab IEC 60079-7, 5.1 Hloov kho hnub tim 2017, Explosive atmospheres - Ntu 7: Cov cuab yeej tiv thaiv los ntawm kev nyab xeeb ntxiv "e. ”, siv IECEx daim ntawv pov thawj tus lej IECEx UL 20.0072X.
• Tej zaum yuav muaj cov lej catalog ua raws li "K" los qhia txog kev xaiv txheej txheej.

CEEB TOOM:

• Cov cuab yeej siv no yuav tsum tau siv nyob rau hauv nws qhov kev ntsuam xyuas tau teev tseg los ntawm Rockwell Automation.
• Ruaj ntseg ib qho kev sib txuas sab nraud uas ua phooj ywg rau cov cuab yeej no los ntawm kev siv cov ntsia hlau, zawv zawg latches, threaded connectors, los yog lwm yam uas muab nrog cov khoom no.
• Tsis txhob txiav cov cuab yeej tshwj tsis yog tias lub hwj chim tau raug tshem tawm lossis qhov chaw paub tias tsis muaj kev phom sij.

CEEB TOOM:

• Cov cuab yeej no tsis tiv taus lub hnub ci lossis lwm qhov chaw ntawm UV hluav taws xob.
• Yog tias cov khoom siv no siv tsis tau raws li qhov tsim los ntawm cov neeg tsim khoom, kev tiv thaiv los ntawm cov cuab yeej tuaj yeem ua tsis taus.

Cov xwm txheej tshwj xeeb rau kev siv nyab xeeb

CEEB TOOM:

• Cov khoom siv no yuav tsum tau muab tso rau hauv UKEX / ATEX / IECEx Zone 2 certified enclosure nrog qhov tsawg kawg nkaus ingress tiv thaiv ntsuas ntawm yam tsawg kawg nkaus IP54 (raws li EN / IEC 60079-0) thiab siv nyob rau hauv ib puag ncig tsis ntau tshaj Pollution Degree 2 ( Raws li tau hais tseg hauv EN / IEC 60664-1) thaum siv hauv cheeb tsam 2 ib puag ncig. Lub kaw lus yuav tsum nkag tau tsuas yog los ntawm kev siv lub cuab yeej.
• Kev tiv thaiv ib ntus yuav tsum tau muab tso rau ntawm theem tsis tshaj 140% ntawm qhov siab tshaj qhov ntsuas voltage ntawm cov khoom siv terminals rau cov khoom siv.
• Cov cuab yeej no yuav tsum tau siv nrog UKEX / ATEX / IECEx certified Rockwell Automation backplanes.
• Earthing yog ua tiav los ntawm mounting ntawm modules ntawm rail.
• Rau module 1734-IE4C, cov conductors yuav tsum tau siv nrog qhov tsawg kawg nkaus tus neeg xyuas pib ntsuas kub ntawm 92 ° C.

Ua ntej Koj Pib
Qhov POINT I/O™ series C khoom siv tau nrog cov hauv qab no:

• DeviceNet® thiab PROFIBUS adapters
• ControlNet® thiab EtherNet/IP™ adapters, siv Studio 5000 Logix Designer® daim ntawv thov version 20 lossis tom qab Saib daim duab 1 thiab daim duab 2 kom paub koj tus kheej nrog rau qhov tseem ceeb ntawm lub module, nco ntsoov tias lub hauv paus kev sib txuas yog ib qho ntawm cov hauv qab no:
• 1734-TB lossis 1734-TBS POINT I / O ob-thooj davhlau ya nyob twg, uas suav nrog 1734-RTB tshem tau lub davhlau ya nyob twg thiab 1734-MB mounting puag
• 1734-TOP lossis 1734-TOPS POINT I / O ib-thooj davhlau ya nyob twg puag

Daim duab 1 - POINT I/O 4 Channel High-Density Current Input Module nrog 1734-TB lossis 1734-TBS Base

	Kev piav qhia		Kev piav qhia
1	Module xauv mechanism	6	1734-TB, 1734-TBS mounting puag
2	Swb-hauv daim ntawv sau tau	7	Interlocking sab pieces
3	Insertable I/O module	8	Mechanical keying (txiv kab ntxwv)
4	Tshem tau lub davhlau ya nyob twg thaiv (RTB) kov	9	DIN rail locking ntsia hlau (txiv kab ntxwv)
5	RTB nrog ntsia hlau los yog caij nplooj ntoos hlav clamp	10	Module kab kos duab

Daim duab 2 - POINT I/O 4 Channel High-Density Current Input Module nrog 1734-TOP lossis 1734-TOPS Base

	Kev piav qhia		Kev piav qhia
1	Module xauv mechanism	6	Interlocking sab pieces
2	Swb-hauv daim ntawv sau tau	7	Mechanical keying (txiv kab ntxwv)
3	Insertable I/O module	8	DIN rail locking ntsia hlau (txiv kab ntxwv)
4	Tshem tau lub davhlau ya nyob twg thaiv (RTB) kov	9	Module kab kos duab

Txhim kho Mounting Base

Txhawm rau nruab lub hauv paus mounting ntawm DIN rail (Allen-Bradley® ntu tus lej 199-DR1; 46277-3; EN50022), ua raws li hauv qab no:

CEEB TOOM: Cov khoom no yog grounded los ntawm DIN rail rau chassis hauv av. Siv zinc-plated chromate passivated steel DIN rail kom paub tseeb tias muaj av zoo. Kev siv lwm cov ntaub ntawv DIN rail (rau example, aluminium los yog yas) uas tuaj yeem corrode, oxidize, los yog cov neeg ua haujlwm tsis zoo, tuaj yeem ua rau tsis raug lossis tsis sib xws. Ruaj ntseg DIN rail rau mounting nto kwv yees li ntawm txhua txhua 200 hli (7.8 nyob rau hauv.) thiab siv kawg anchors tsim nyog. Nco ntsoov ua kom av DIN rail kom zoo. Saib Daim Ntawv Qhia Txog Kev Lag Luam Automation thiab Grounding Guidelines, luam tawm 1770-4.1, yog xav paub ntxiv.

1. Tso lub mounting puag vertically saum toj no cov chav nyob (adapter, fais fab mov lossis module uas twb muaj lawm).
   
2. Swb lub hauv paus mounting cia cia cov interlocking sab daim los koom lub nyob ib sab module los yog adapter.
3. Nias kom ruaj khov rau lub rooj mounting ntawm DIN rail. Lub mounting puag snaps rau hauv qhov chaw.
4. Txhawm rau tshem tawm lub hauv paus mounting los ntawm DIN rail, tshem lub module, thiab siv ib tug me me bladed screwdriver tig lub hauv paus locking ntsia hlau mus rau txoj hauj lwm ntsug. Qhov no tso tawm lub xauv mechanism. Tom qab ntawd nqa ncaj nraim kom tshem tawm.

Nruab lub Module

Lub module tuaj yeem ntsia tau ua ntej lossis tom qab lub hauv paus installation. Xyuas kom tseeb tias lub hauv paus mounting yog raug keyed ua ntej txhim kho lub module rau hauv lub hauv paus mounting. Tsis tas li ntawd, xyuas kom meej tias lub hauv paus locking ntsia hlau yog positioned kab rov tav siv rau hauv paus.

CEEB TOOM: Thaum koj ntxig lossis tshem tawm lub module thaum lub zog rov qab qhib, muaj hluav taws xob arc tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij.

Nco ntsoov tias lub hwj chim raug tshem tawm lossis thaj chaw tsis muaj kev phom sij ua ntej yuav mus. Rov qab hluav taws xob arcing ua rau hnav ntau dhau rau kev sib cuag ntawm ob qho tib si module thiab nws cov mating connector. Cov neeg hnav khaub ncaws tuaj yeem tsim hluav taws xob tiv thaiv uas tuaj yeem cuam tshuam rau kev ua haujlwm module.

1. Siv lub hau ntswj ntsia hlau los tig tus yuam sij hloov ntawm lub hauv paus mounting clockwise kom txog rau thaum tus naj npawb xav tau rau hom module tau teeb tsa zoo sib xws nrog qhov ntsuas ntawm lub hauv paus.
   
   
2. Xyuas kom tseeb tias DIN rail locking ntsia hlau yog nyob rau hauv txoj hauj lwm kab rov tav. Yog hais tias lub xauv mechanism yog xauv, koj tsis tuaj yeem ntxig lub module.
3. Ntxig lub module ncaj nraim mus rau hauv lub hauv paus mounting thiab nias kom ruaj ntseg. Lub module xauv rau hauv qhov chaw.

Nruab qhov Tshem Tawm Terminal Block

Ib qho Tshem Tawm Terminal Block (RTB) yog muab nrog koj lub hauv paus kev sib txuas. Txhawm rau tshem tawm, rub rau ntawm RTB kov. Qhov no tso cai rau lub hauv paus mounting raug tshem tawm thiab hloov raws li qhov tsim nyog yam tsis tau tshem tawm ib qho ntawm cov xov hlau. Txhawm rau rov ntxiv qhov Tshem Tawm Terminal Block, ua raws li hauv qab no:

1. Ntxig qhov kawg ntawm qhov kov rau hauv lub hauv paus unit. Qhov kawg no muaj ib qho nkhaus uas txuas nrog lub hauv paus thaiv.
2. Tig lub davhlau ya nyob twg thaiv rau hauv lub hauv paus thaiv kom txog thaum nws kaw nws tus kheej hauv qhov chaw.
3. Yog tias I / O module raug teeb tsa, snap lub RTB kov rau hauv qhov chaw ntawm lub module.
   

CEEB TOOM: Thaum koj txuas lossis txiav tawm qhov Tshem Tawm Tshem Tawm Terminal Block (RTB) nrog lub zog sab nraud thov, hluav taws xob arc tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij.

Nco ntsoov tias lub hwj chim raug tshem tawm lossis thaj chaw tsis muaj kev phom sij ua ntej yuav mus.

CEEB TOOM: Rau 1734-RTBS thiab 1734-RTB3S, kom latch thiab unlatch cov hlau, ntxig ib lub hau ntswj (catalog naj npawb 1492-N90 - 3 hli txoj kab uas hla) rau hauv qhov qhib ntawm kwv yees li 73 ° (cov hniav nto yog tib yam nrog rau saum npoo ntawm qhov qhib. ) thiab thawb kom maj mam.

CEEB TOOM: Rau 1734-TOPS thiab 1734-TOP3S, txhawm rau latch thiab unlatch cov hlau, ntxig ib lub hau ntswj (catalog naj npawb 1492-N90 - 3 mm inch) rau hauv qhov qhib ntawm kwv yees li 97 ° ( hniav nto yog tib yam nrog rau saum npoo ntawm qhov qhib) thiab nias rau hauv (tsis txhob thawb nce lossis nqis).

Tshem tawm Mounting Base

Txhawm rau tshem tawm lub hauv paus mounting, koj yuav tsum tshem tawm ib qho kev teeb tsa, thiab cov module ntsia hauv lub hauv paus mus rau sab xis. Tshem tawm Tshem Tawm Terminal Block, yog tias xaim.

1. Unlatch RTB kov ntawm I/O module.
2. Rub ntawm RTB kov kom tshem tawm Tshem Tawm Terminal Block.
3. Nias lub module xauv rau sab saum toj ntawm lub module.
4. Rub ntawm I / O module kom tshem tawm ntawm lub hauv paus.
5. Rov ua cov kauj ruam 1, 2, 3 thiab 4 rau lub module rau sab xis.
6. Siv lub hau me me los tig lub txiv kab ntxwv lub hauv paus locking ntsia hlau mus rau txoj hauj lwm ntsug. Qhov no tso tawm lub xauv mechanism.
7. Nqa ncaj nraim kom tshem tawm.

Nruab ib lub 1734-TOPS Base

1. Tso lub hauv paus vertically saum toj no cov chav nyob, xws li lub adapter, fais fab mov, los yog module uas twb muaj lawm.
2. Xaub lub hauv paus hauv qab, tso cai rau cov khoom sib cuam tshuam los koom nrog lub tsev uas nyob ib sab.
3. Nias kom khov kho lub hauv paus ntawm DIN rail kom txog thaum lub hauv paus snaps rau hauv qhov chaw.
4. Xyuas kom tseeb tias DIN rail locking ntsia hlau yog nyob rau hauv kab rov tav, xauv txoj hauj lwm ua ntej ntxig rau I / O module.

Tshem tawm 1734-TOPS Base

1. Txhawm rau tshem tawm cov kab hluav taws xob los ntawm DIN rail, koj yuav tsum tshem tawm cov module uas tau nruab rau sab xis ntawm lub hauv paus.
2. Nyem lub module xauv mechanism ntawm lub module mus rau sab xis ntawm lub hauv paus, rub mus rau tshem tawm cov module.
3. Tig lub txiv kab ntxwv ntswj ntsia hlau mus rau txoj hauj lwm ntsug kom qhib lub hauv paus ntawm DIN rail.
4. Xaub lub hauv paus kom tso tawm ntawm nws cov mating units.

Hlau Module

Chas Gnd = Chassis ground C = Common

CEEB TOOM: Yog tias koj txuas lossis txiav cov xaim hluav taws xob thaum lub zog hluav taws xob sab nraud qhib, lub zog hluav taws xob tuaj yeem tshwm sim. Qhov no tuaj yeem ua rau muaj kev tawg hauv qhov chaw muaj kev phom sij. Nco ntsoov tias lub hwj chim raug tshem tawm lossis thaj chaw tsis muaj kev phom sij ua ntej yuav mus.

Kab kos duab

(1) 1734-VTM yog xaiv tau. Siv 24V DC mov los ntawm 1734-VTM module rau 2-xaim / 3-xaim li.

Channel	Cov tswv yim tam sim no	Feem ntau	Chassis Hauv av
0	0	4 los yog 5	6 los yog 7
1	1
2	2
3	3

12/24V DC yog muab los ntawm lub tsheb npav sab hauv.

Sib tham nrog koj Module

POINT I / O modules xa (siv) thiab tau txais (tsim) I / O cov ntaub ntawv (cov lus). Koj daim ntawv qhia cov ntaub ntawv no mus rau lub processor nco.

Qhov no POINT I / O input module tsim 12 bytes ntawm cov ntaub ntawv nkag (scanner Rx) thiab cov ntaub ntawv tsis raug. Nws tsis haus I/O cov ntaub ntawv (scanner Tx).

Daim ntawv qhia Default Data Map rau 1734-IE4C, 1734-IE4CK Analog Input Module

Cov lus loj: 12 Bytes

15

14

13

12

11

10

09

08

07

06

05

04

03

02

01

00

Tsim (scanner Rx)

Cov tswv yim Channel 0 High Byte

Input Channel 0 Tsawg Byte

Cov tswv yim Channel 1 High Byte

Input Channel 1 Tsawg Byte

Cov tswv yim Channel 2 High Byte

Input Channel 2 Tsawg Byte

Cov tswv yim Channel 3 High Byte

Input Channel 3 Tsawg Byte

Cov xwm txheej Byte rau Channel 1

Cov xwm txheej Byte rau Channel 0

OR

UR

HHA

LLA

HA

LA

CM

CF

OR

UR

HHA

LLA

HA

LA

CM

CF

Cov xwm txheej Byte rau Channel 3

Cov xwm txheej Byte rau Channel 2

OR

UR

HHA

LLA

HA

LA

CM

CF

OR

UR

HHA

LLA

HA

LA

CM

CF

Qhov twg = Channel Fault status; 0 = tsis muaj qhov yuam kev, 1 = faults = Calibration hom; 0 = normal, 1 = calibration mode LA = Low Tswb; 0 = tsis muaj qhov yuam kev, 1 = txhaum = siab tswb; 0 = no error, 1 = fault LA = Low/Low Tswb: 0 = no error, 1 = fault HHA = High/High Alarm; 0 = tsis muaj qhov yuam kev, 1 = txhaum UR = Tsis muaj teeb meem; 0 = tsis muaj qhov yuam kev, 1 = txhaum OR = Tshaj dhau; 0 = no error, 1 = fault

Consumes (scanner Tx)

Tsis siv cov ntaub ntawv

Txhais cov xwm txheej ntsuas

Saib daim duab 3 thiab Table 1 yog xav paub txog yuav ua li cas thiaj txhais cov ntsuas ntsuas.

Daim duab 3 – Qhov taw qhia xwm txheej rau POINT I/O 4 Channel High Density Current Input Module

• Module Status
• Network xwm txheej
• Status of Input 0
• Status of Input 1
• Status of Input 2
• Status of Input 3

Table 1 – Indicator Status for Module

Qhov taw qhia	Xeev	Kev piav qhia
Module xwm txheej	Tawm	Tsis muaj hwj chim siv rau ntaus ntawv.
	Ntsuab	Cov cuab yeej ua haujlwm ib txwm.
	Flashing ntsuab	Device xav tau commissioning vim ploj lawm, tsis tiav, los yog tsis raug configuration.
	Flashing liab	Rov qab ua txhaum.
	Liab	Unrecoverable txhaum tej zaum yuav xav tau kev hloov khoom siv.
	Flashing liab / ntsuab	Device yog nyob rau hauv tus kheej-test hom.

Table 1 – Indicator Status for Module (Ntxiv mus) 

Qhov taw qhia	Xeev	Kev piav qhia
Network xwm txheej	Tawm	Ntaus tsis tau online:- Ntaus tsis tau ua tiav dup_MAC-id test.- Ntaus tsis siv hluav taws xob - xyuas qhov ntsuas ntsuas ntsuas ntsuas.
	Flashing ntsuab	Cov cuab yeej online tab sis tsis muaj kev sib txuas hauv lub xeev tsim.
	Ntsuab	Cov cuab yeej yog online thiab muaj kev sib txuas hauv lub xeev tsim.
	Flashing liab	Ib lossis ntau qhov kev sib txuas ntawm I / O yog nyob rau hauv lub sijhawm ua haujlwm.
	Liab	Qhov tseem ceeb txuas tsis ua hauj lwm – ua tsis tau tejyam khoom siv kev sib txuas lus. Cov cuab yeej kuaj pom qhov yuam kev uas tiv thaiv nws los ntawm kev sib txuas lus hauv lub network.
	Flashing liab / ntsuab	Kev sib txuas lus faulted ntaus ntawv - lub cuab yeej tau kuaj pom ib qho kev nkag mus rau hauv lub network thiab nyob rau hauv kev sib txuas lus faulted xeev. Cov cuab yeej tau txais thiab lees txais qhov Kev Sib Txuas Lus Tsis Txaus Siab Thov - cov lus ntev raws tu qauv.
Channel xwm txheej	Tawm	Module hauv CAL hom.
	Khoom ntsuab	Ib txwm (channel scanning inputs).
	Flashing ntsuab	Channel raug calibrated.
	Khoom liab	Tsis muaj hwj chim lossis loj channel txhaum.
	Flashing liab	Channel ntawm qhov kawg ntawm ntau yam (0 mA lossis 21 mA).

Specifications

TSEEM CEEB Cov tswv yim hloov tshiab tus nqi thiab cov kauj ruam teb rau 1734-IE4C thiab 1734-IE4CK modules txawv los ntawm cov catalog tooj 1734-IE2C thiab 1734-IE2CK modules.

Input Specifications 

Yam ntxwv	Tus nqi
Tus naj npawb ntawm inputs	4, ib leeg-kawg, tsis nyob ib leeg, tam sim no
Kev daws teeb meem	16 ntsis - tshaj 0…21 mA0.32 µA/cnt
Input tam sim no terminal	4…20 mA0…20 mA
Qhov tseeb tseeb (1) Lub davhlau ya nyob twg tam sim no	0.1% Tag Nrho Scale @ 25 ° C
Qhov tseeb drift w / temp. Tam sim no lub davhlau ya nyob twg	30 ppm / ° C
Cov tswv yim hloov tshiab tus nqi, ib module	240 ms @ Notch = 50 Hz200 ms @ Notch = 60 Hz (default) 120 ms @ Notch = 100 Hz100 ms @ Notch = 120 Hz 60 ms @ Notch = 200 Hz 50 ms @ Notch = 240 Hz @ Notch 40 ms 300 ms @ Notch = 30 Hz 400 ms @ Notch = 25 Hz
Kauj ruam teb, per channel	60 ms @ Notch = 50 Hz50 ms @ Notch = 60 Hz (default) 30 ms @ Notch = 100 Hz25 ms @ Notch = 120 Hz 15 ms @ Notch = 200 Hz12.5 ms @ Notch = 240 Hz 10 300 ms @ Notch Hz7.5 ms @ Notch = 400 Hz6.25 ms @ Notch = 480 Hz
Input impedance / tsis kam	60 Ω
Hom kev hloov pauv	Delta Sigma
Cov hom qauv uas tsis lees txais yuav piv	-120 dB

Input Specifications (Txuas ntxiv) 

Yam ntxwv	Tus nqi
Hom kev tsis lees txais qhov piv txwv	-60 dBNotch Filter13.1 Hz @ Notch = 50 Hz15.7 Hz @ Notch = 60 Hz (default) 26.2 Hz @ Notch = 100 Hz31.4 Hz @ Notch = 120 Hz52.4 Hz @ Notch = 200 Hz @ 62.9 Hz Notch = 240 Hz78.6 Hz @ Notch = 300 Hz104.8 Hz @ Notch = 400 Hz125.7 Hz @ Notch = 480 Hz
Cov ntaub ntawv hom	Kos npe tus lej
Tshaj siab tshaj	Fault tiv thaiv rau 28.8V DC
Calibration	Hoobkas calibrated
Indicators, logic sab	1 ntsuab/liab network xwm txheej 1 ntsuab/liab module xwm txheej 4 ntsuab/liab input txheej xwm

(1) suav nrog offset, nce, non-linearity, thiab repeatability yuam kev.

TSEEM CEEB Saib POINT I/O Modules Selection Guide, luam tawm 1734-SG001 rau cov ntaub ntawv hais txog kev rhuav tshem lub tsheb npav fais fab. Saib cov ntu "Thaum Yuav Siv Lub Fais Fab Fais Fab" thiab "Thaum Yuav Siv Lub Hwj Chim Loj Loj".

General Specifications

Yam ntxwv	Tus nqi
Terminal puag	1734-TB3, 1734-TB3S thaiv kev sib dhos
POINTBus ™ tam sim no, max	75 mA
Lub zog dissipation, max	0.55W @ 28.8V DC
Thermal dissipation, max	2.0 BTU / teev @ 28.8V DC
Muab voltage, rov	5v dc ua
Muab voltage range, teb fais fab input	10… 28.8V DC, 20 mA, Chav 2
Input tam sim no	4…20mA lossis 0…20mA
Rho tawm voltage	50V, kuaj @ 1500V AC rau 60 s, inputs, thiab teb lub zog rau qhov system Tsis muaj kev sib cais ntawm tus kheej inputs lossis inputs rau lub zog hluav taws xob
Dimensions (H x W x D), approx.	56.0 x 12.0 x 75.5 hli (2.21 x 0.47 x 2.97 in.)
Keyswitch txoj hauj lwm	3
Enclosure type rating	Tsis muaj (qhib-style)
Hlau loj	0.25… 2.5 mm2 (22…14 AWG) khoom los yog stranded tooj liab hlau nyob ntawm 100 ° C (212 ° F), los yog ntau dua, 1.2 hli (3/64 nyob rau hauv.) rwb thaiv tsev max
Cov kab mob (1)	2 - ntawm cov teeb liab chaw nres nkoj 1 - ntawm cov chaw nres nkoj fais fab
Hom hlau	Tiv thaiv
Terminal puag ntsia hlau torque	Txiav txim siab los ntawm kev teeb tsa lub davhlau ya nyob twg thaiv
Nyhav, approx.	35 g (1.235 ooj)
North American temp code	t4 ua
UKEX / ATEX temp code	T4
IECEx temp code	T4

(1) Siv cov ntaub ntawv ntawm pawg neeg xyuas pib no rau kev npaj tus neeg xyuas pib txoj haujlwm raws li tau piav qhia hauv Kev Siv Hluav Taws Xob Hluav Taws Xob Hluav Taws Xob thiab Cov Lus Qhia Hauv av, luam tawm 1770-4.1.

Environmental Specifications 

Yam ntxwv	Tus nqi
Kub, ua haujlwm	IEC 60068-2-1 (Test Ad, Kev Ua Haujlwm Txias), IEC 60068-2-2 (Test Bd, Ua Haujlwm Kub Kub), IEC 60068-2-14 (Test Nb, Kev Ua Haujlwm Thermal Shock): -20 ° C ≤ Ta ≤ +55 °C (-4 ° F ≤ Ta ≤ + 131 ° F)
Kub, ib puag ncig huab cua, max	55 ° C (131 ° F)
Kub, tsis ua haujlwm	IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock): -40... +85 ° C (-40 ... + 185 ° F)
txheeb ze humidity	IEC 60068-2-30 (Test Db, Unpackaged Damp Thaum tshav kub kub): 5…95% noncondensing
Kev vibration	IEC 60068-2-6 (Test Fc, Ua Haujlwm): 5g @ 10…500 Hz
Kev poob siab, kev ua haujlwm	IEC 60068-2-27 (Test Ea, Unpackaged Shock): 30 g
Kev poob siab, tsis ua haujlwm	IEC 60068-2-27 (Test Ea, Unpackaged Shock): 50 g
Cov pa tawm	CISPR 11 Pawg 1, Chav A
Kev tiv thaiv ESD	IEC 61000-4-2: 6 kV kev tiv thaiv tawm 8 kV cua tawm
Radiated RF tiv thaiv	IEC 61000-4-3: 10V / m nrog 1 kHz sine-wave 80% AM los ntawm 80…6000 MHz
Kev tiv thaiv EFT/B	IEC 61000-4-4: ± 3 kV ntawm 5 kHz ntawm cov chaw nres nkoj fais fab ± 3 kV ntawm 5 kHz ntawm cov chaw nres nkoj teeb liab
Surge transient tiv thaiv	IEC 61000-4-5: ± 1 kV kab-kab (DM) thiab ± 2 kV kab-lub ntiaj teb (CM) ntawm cov chaw nres nkoj fais fab ± 2 kV kab-lub ntiaj teb (CM) ntawm cov chaw nres nkoj shielded
Ua RF tiv thaiv	IEC 61000-4-6: 10V rms nrog 1 kHz sine-wave 80% AM @ 150 kHz… 80 MHz

Cov ntawv pov thawj

Daim ntawv pov thawj (thaum cov khoom raug cim)(1)	Tus nqi
c-UL- mus	UL Listed Industrial Control Equipment, tau ntawv pov thawj rau Asmeskas thiab Canada. Saib UL File E65584.UL Sau npe rau Chav Kawm I, Division 2 Pab Pawg A, B, C, D Cov Chaw Muaj Teeb Meem, tau lees paub rau Asmeskas thiab Canada. Saib UL File ua 194810.
UK thiab CE	UK Txoj Cai Lij Choj 2016 No. 1091 thiab European Union 2014/30 / EU EMC Cov Lus Qhia, ua raws li: EN 61326-1; Meas./Control/Lab., Industrial Requirement Sen 61000-6-2; Industrial Immunity EN 61000-6-4; Industrial Emission Sen 61131-2; Programmable Controllers (Clause 8, Zone A thiab B) UK Statutory Instrument 2012 No. 3032 thiab European Union 2011/65/EU RoHS, ua raws li: EN IEC 63000; Cov ntaub ntawv technical
Ex	UK Txoj Cai Lij Choj 2016 No. 1107 thiab European Union 2014/34/EU ATEX Cov Lus Qhia, ua raws li: EN IEC 60079-0; General Requirement Sen IEC 60079-7; Explosive Atmospheres, Kev Tiv Thaiv "e" II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X
IECEx	IECEx System, raws li txoj cai 60079-0; Cov Lus Qhia dav dav IEC 60079-7; Explosive Atmospheres, Kev Tiv Thaiv "e" II 3 G Ex ec IIC T4 IECEx UL 20.0072X
EAC	Lavxias teb sab kev lis kev cai Union TR CU 020/2011 EMC Technical Regulation
RCM	Australian Radiocommunications Act, ua raws li: AS/NZS CISPR 11; Muaj Emissions

Cov ntawv pov thawj (Ntxiv) 

Daim ntawv pov thawj (thaum cov khoom raug cim)(1)	Tus nqi
KC	Kaus Lim Kauslim Kev Sau Npe ntawm Cov Khoom Siv Tshaj Tawm thiab Kev Sib Txuas Lus, ua raws li: Tshooj 58-2 ntawm Txoj Cai Xov Tooj Cua, Nqe 3
Morocco	Arête Ministerial n° 6404-15 du 29 Ramadan 1436
CCC	CNCA-C23-01 CCC Txoj Cai Kev Siv Hluav Taws Xob Hluav Taws Xob Cov Khoom Siv Hluav Taws Xob CCC: 2020122309111607

(1) Saib cov khoom pov thawj txuas ntawm rok.auto/certifications rau Kev Tshaj Tawm Txog Kev Ua Raws Cai, Daim Ntawv Pov Thawj, thiab lwm yam ntaub ntawv pov thawj.

Kev them nyiaj yug Rockwell Automation

Siv cov peev txheej no los saib xyuas cov ntaub ntawv txhawb nqa.

Lub Chaw Pab Txhawb	Nrhiav kev pab nrog cov yeeb yaj kiab yuav ua li cas, FAQs, sib tham, neeg siv lub rooj sab laj, Knowledgebase, thiab cov khoom ceeb toom hloov tshiab.	rok.auto/support
Local Technical Support Xov tooj	Nrhiav tus lej xov tooj rau koj lub tebchaws.	rok.auto/phonesupport
Technical Documentation Center	Nkag mus sai sai thiab rub tawm cov kev qhia tshwj xeeb, cov lus qhia kev teeb tsa, thiab cov neeg siv phau ntawv.	rok.auto/techdocs ib
Literature Library	Nrhiav cov lus qhia kev teeb tsa, phau ntawv qhia, daim ntawv qhia, thiab cov ntaub ntawv tshaj tawm.	rok.auto/literature
Product Compatibility thiab Download Center (PCDC)	Download tau firmware, txuam files (xws li AOP, EDS, thiab DTM), thiab nkag mus rau cov ntawv tso tawm cov khoom.	rok.auto/pcdc ib

Cov ntaub ntawv tawm tswv yim

Koj cov lus pab peb pab koj cov ntaub ntawv xav tau zoo dua. Yog tias koj muaj lus qhia txog kev txhim kho peb cov ntsiab lus, ua kom tiav daim ntawv ntawm rok.auto/docfeedback.

Cov Khoom Siv Hluav Taws Xob thiab Hluav Taws Xob Hluav Taws Xob (WEEE)

Thaum kawg ntawm lub neej, cov cuab yeej no yuav tsum tau muab cais tawm ntawm cov khoom pov tseg uas tsis muaj nyob hauv nroog.

Rockwell Automation tuav cov khoom tam sim no ib puag ncig kev ua raws cov ntaub ntawv ntawm nws website ntawm rok.auto/pec.

Rockwell Tricare A.Ş. Kar Plaza Markaz E Blok Kat: 6 34752 İstanbul Tel: +90 (216) 5698400 EE

Txuas nrog peb.

rockwellautomation.com

expanding human possibility®

AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 EUROPE/MIDDLE EAST/AFRICA NPE: Rockwell Automation Keelan 12a, 1831 Diego, Belgium, Tel: (32)2 663 0600, Fax: (32)2 663 0640 ASIA PACIFIC: Rockwell Automation, Level 14, Core F, Cyber ​​​​port 3, 100 Cyber ​​port Road, Hong Kong. Tel: (852) 2887 4788, Fax: (852) 2508 1846 UNITED KINGDOM: Rockwell Automation Ltd. Pittsfield, Kiln Farm Milton Keynes, MK11 3DR, United Kingdom, Tel: (44)(1908) 838-800, Fax. 44) (1908) 261-917

Allen-Bradley, nthuav dav tib neeg muaj peev xwm, Factory Tham, POINT I / O, POINT Bus, Rockwell Automation, Studio 5000 Logix Designer, thiab Tech Connect yog cov cim lag luam ntawm Rockwell Automation, Inc. ControlNet, Ntaus Net, thiab Ether Net / IP yog cov cim lag luam ntawm ODVA, Inc.

Cov cim lag luam tsis koom nrog Rockwell Automation yog cov cuab yeej ntawm lawv cov tuam txhab.

Tshaj tawm 1734-IN032F-EN-P – Cuaj hlis 2022 | Supersedes Publication 1734-IN032E-EN-P – Lub Peb Hlis 2021 Copyright © 2022 Rockwell Automation, Inc. All rights reserved.

Cov ntaub ntawv / Cov ntaub ntawv

Allen-Bradley POINT I/O 4 Channel High Density Current Input Modules [ua pdf] Phau ntawv qhia 1734-IE4C, 1734-IE4CK, Series C, POINT IO 4 Channel High Density Current Input Modules, POINT IO 4, Channel High Density Tam Sim No Input Modules, High Density Tam Sim No Input Modules, Ceev Nthuav Tam Sim No Input Modules, Input Modules, Cov qauv

Cov ntaub ntawv

• Cov neeg siv phau ntawv