Allen-Bradley POINT I/O 4 Channel High Density Current Input Modules Manual
POINT I/O 4 Channel High Density Current Input Module Litaelo tsa ho Kenya
HLOKOMELA: Bala tokomane ena le litokomane tse thathamisitsoeng karolong ea Mehloli ea Tlatsetso mabapi le ho kenya, ho hlophisoa le ho sebetsa ha thepa ena pele u kenya, u lokisa, u sebelisa kapa u hlokomela sehlahisoa sena. Basebelisi ba kopuoa ho itloaetsa litaelo tsa ho kenya le ho kenya likhoele ho kenyelletsa litlhoko tsa likhoutu tsohle tse sebetsang, melao le litekanyetso.
Mesebetsi e kenyeletsang ho kenya, ho lokisa, ho kenya ts'ebetsong, ts'ebeliso, kopano, ho qhaqhoa le tlhokomelo li hlokoa hore li etsoe ke basebetsi ba koetlisitsoeng ka mokhoa o nepahetseng ho latela melao ea ts'ebetso e sebetsang. Haeba sesebelisoa sena se sebelisoa ka tsela e sa boleloang ke moetsi, tšireletso e fanoeng ke thepa e ka senyeha.
Tikoloho le Sebaka
HLOKOMELA: Thepa ena e reretsoe ho sebelisoa tikolohong ea indasteri ea Pollution Degree 2, ka overvoltagLisebelisoa tsa Sehlopha sa II (joalokaha ho hlalositsoe ho EN/IEC 60664-1), sebakeng se bophahamong ho fihla ho 2000 m (6562 ft) ntle le ho nyenyefatsa.
Thepa ena ha ea rereloa ho sebelisoa libakeng tsa bolulo 'me e ka 'na ea se ke ea fana ka tšireletso e lekaneng litšebeletsong tsa puisano tsa seea-le-moea libakeng tse joalo.
Thepa ena e fanoa e le lisebelisoa tsa mofuta o bulehileng bakeng sa tšebeliso ea kahare. E tlameha ho kenngoa ka har'a sebaka se kampetsoeng se etselitsoeng hantle maemo a itseng a tikoloho a tla be a le teng le a etselitsoeng ka nepo ho thibela kotsi ea motho ka lebaka la ho fumaneha ha likarolo tsa bophelo. Sebaka se kampetsoeng se tlameha ho ba le thepa e thibelang malakabe e loketseng ho thibela kapa ho fokotsa ho ata ha lelakabe, ho latela tekanyetso ea ho ata ha lelakabe la 5VA kapa ho amoheloa bakeng sa kopo haeba e se tšepe. Bokahare ba sebaka se koaletsoeng bo tlameha ho fumaneha feela ka tšebeliso ea sesebelisoa. Likarolo tse latelang tsa khatiso ena li ka ba le lintlha tse ling mabapi le lintlha tsa mofuta oa sebaka se koaletsoeng tse hlokoang ho tsamaisana le litifikeiti tse itseng tsa polokeho ea sehlahisoa.
Ho phaella khatisong ena, sheba tse latelang:
- Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa litlhoko tse ling tsa ho kenya.
- NEMA Standard 250 le EN/IEC 60529, ha e sebetsa, bakeng sa litlhaloso tsa likhato tsa ts'ireletso tse fanoeng ke libaka tse koetsoeng.
Ho thibela ho tsoa ha Electrostatic
HLOKOMELA: Sesebelisoa sena se na le maikutlo a ho tsoa ha electrostatic, e ka bakang tšenyo e ka hare le ho ama ts'ebetso e tloaelehileng. Latela litataiso tsena ha u sebetsana le thepa ena:
- Thetsa ntho e theohileng ho tima ntho e ka bang teng.
- Apara leqhoele le lumelletsoeng la letsoho le theosang.
- Se ke oa ama lihokelo kapa lithakhisa maboteng a likarolo.
- U se ke ua ama likarolo tsa potoloho ka har'a thepa.
- Sebelisa sebaka sa ho sebetsa sa static-safe, haeba se le teng.
- Boloka thepa ka har'a sephutheloana se loketseng se sa sebetseng ha se sa sebelisoe.
Tumello ea Sebaka se Kotsi sa Amerika Leboea
Lintlha tse latelang li sebetsa ha u sebelisa thepa ena libakeng tse kotsi.
Lihlahisoa tse tšoailoeng "CL I, DIV 2, GP A, B, C, D" li loketse ho sebelisoa ho Sehlopha sa I Division 2 Lihlopha A, B, C, D, Libaka tse Kotsi le libaka tse se nang kotsi feela. Sehlahisoa se seng le se seng se na le matšoao ho nameplate ea lintlha tse bontšang khoutu ea mocheso ea sebaka se kotsi. Ha o kopanya lihlahisoa ka har'a sistimi, khoutu ea mocheso e mpe ka ho fetesisa (nomoro e tlase "T") e ka sebelisoa ho thusa ho fumana khoutu ea mocheso o akaretsang oa sistimi. Metsoako ea lisebelisoa tsamaisong ea hau e itšetlehile ka lipatlisiso tsa Bolaoli ba lehae bo nang le Taolo nakong ea ho kenya.
TLHOKOMELISO:
Kotsi ea Ho phatloha -
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
- Se ke oa hakolla likhokahano sesebelisoa sena ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi. Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena.
- Phapanyetsano ea likarolo e ka 'na ea sitisa ho tšoaneleha bakeng sa Sehlopha sa I, Karolo ea 2.
HLOKOMELA: Ho ipapisa le lithibelo tsa UL, matla a masimong le lisebelisoa tsohle tse hokahaneng li tlameha ho tsamaisoa ho tsoa mohloling o le mong o tsamaellanang le tse latelang: Sehlopha sa 2.
Kamohelo ea Sebaka se Kotsi UK le Europe
Lintlha tse latelang li sebetsa ho lihlahisoa tse tšoailoeng II 3 G:
- E reretsoe ho sebelisoa libakeng tse ka bang le seqhomane joalokaha ho hlalositsoe ke UKEX regulation 2016 No. 1107 le European Union Directive 2014/34/EU 'me e fumanoe e lumellana le Litlhoko tsa Bohlokoa tsa Bophelo bo Botle le Tšireletseho tse amanang le moralo le kaho ea lisebelisoa tsa Sehlopha sa 3 tse reriloeng. bakeng sa ho sebelisoa sebakeng sa 2 se nang le seqhomane se ka bang teng, se fanoeng ho Shejule 1 ea UKEX le Annex II ea Taelo ena.
- Ho lumellana le Litlhokahalo tsa Bohlokoa tsa Bophelo le Ts'ireletso ho netefalitsoe ka ho latela EN IEC 60079-7, le EN IEC 60079-0.
- Ke Sehlopha sa II sa Thepa, Sehlopha sa 3 sa Thepa, 'me se lumellana le Litlhoko tsa Bohlokoa tsa Bophelo bo Botle le Tšireletseho tse amanang le moralo le kaho ea thepa e joalo e fanoeng ho Schedule 1 ea UKEX le Annex II ea EU Directive 2014/34/EU. Sheba UKEx le EU Declaration of Conformity ho rok.auto/certifications bakeng sa lintlha.
- Mofuta oa tšireletso ke Ex ec IIC T4 Gc ho ea ka EN IEC 60079-0: 2018, LITLHAKISO TSA LITŠOANTŠISO TSA HO PHAHAMA - KAROLO EA 0: LITLHAKISO - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018, le CENELEC EN IEC 60079+7:2015: , Ho phatloha ho hoholo. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e".
- Ikamahanya le Maemo a EN IEC 60079-0: 2018, LITABA TSE PHAHLOKANG - KAROLO EA 0: SESEBETSI - LITLHAKISO TSE KAKARETSO, Letsatsi la Phatlalatso 07/2018, le CENELEC EN IEC 60079- 7:2015+A1:2018 Atmosphere. Tšireletso ea lisebelisoa ka ho eketseha ha tšireletso "e", nomoro ea setifikeiti sa boitsebiso DEMKO 04 ATEX 0330347X le UL22UKEX2478X.
- E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahalang hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le lihlopha tsa Zone 2 ho latela UKEX regulation 2016 No. 1107 le ATEX Directive 2014/34/EU.
- E kanna ea ba le linomoro tsa lethathamo tse lateloang ke "K" ho bonts'a khetho e lumellanang ea ho roala.
Kamohelo ea Sebaka se Kotsi sa IEC
Lintlha tse latelang li sebetsa ho lihlahisoa tse nang le setifikeiti sa IECEx:
- E reretsoe ho sebelisoa libakeng tseo ho tsona ho phatloha ho bakoang ke likhase, mouoane, moholi, kapa moea ho ke keng ha etsahala hore li etsahale, kapa ho ka etsahala hore li etsahale ka seoelo le ka nako e khutšoane feela. Libaka tse joalo li lumellana le likarolo tsa Zone 2 ho IEC 60079-0.
- Mofuta oa tšireletso ke Ex eC IIC T4 Gc ho latela IEC 60079-0 le IEC 60079-7.
- IEC 60079-0, Maemo a phatlohang - Karolo ea 0: Lisebelisoa - Litlhoko tse akaretsang, Khatiso ea 7, Letsatsi la ntlafatso 2017 le IEC 60079-7, 5.1 Khatiso ea 2017. ”, nomoro ea setifikeiti sa IECEx sa IECEx UL 7X.
- E kanna ea ba le linomoro tsa lethathamo tse lateloang ke "K" ho bonts'a khetho e lumellanang ea ho roala.
TLHOKOMELISO:
- Sesebelisoa sena se tla sebelisoa ka har'a litekanyetso tse boletsoeng ke Rockwell Automation.
- Sireletsa likhokahano life kapa life tsa kantle tse amanang le sesebelisoa sena ka ho sebelisa likurufu, lithapo tse thellang, likhokello tsa likhoele, kapa mekhoa e meng e fanoeng ka sehlahisoa sena.
- Se ke oa hakolla thepa ntle le haeba motlakase o tlositsoe kapa sebaka seo ho tsejoa hore ha se kotsi.
HLOKOMELA:
- Sesebelisoa sena ha se hanyetsane le khanya ea letsatsi kapa mehloli e meng ea mahlaseli a UV.
- Haeba sesebelisoa sena se sebelisoa ka mokhoa o sa hlalosoang ke moetsi, ts'ireletso e fanoang ke sesebelisoa e ka senyeha.
Maemo a Khethehileng a Tšebeliso e Sireletsehileng
TLHOKOMELISO:
- Thepa ena e tla beoa sebakeng se tiisitsoeng sa UKEX/ATEX/IECEx Zone 2 se nang le tekanyo e tlase ea tšireletso ea IP54 (ho latela EN/IEC 60079-0) mme e sebelisoe tikolohong e sa feteng Pollution Degree 2. joalo ka ha ho hlalositsoe ho EN/IEC 60664-1) ha e sebelisoa tikolohong ea Zone 2. Letlapa le tlameha ho fumaneha feela ka tšebeliso ea lisebelisoa.
- Tšireletso ea nakoana e tla fanoa e behiloe boemong bo sa feteng 140% ea tlhōrō ea matla a phahameng.tage liteisheneng tsa phepelo ea lisebelisoa.
- Thepa ena e tlameha ho sebelisoa feela le UKEX/ATEX/IECEx e netefalitsoeng ea Rockwell Automation backplanes.
- Earthing e finyelloa ka ho kenya li-module holim'a terene.
- Bakeng sa mojule 1734-IE4C, li-conductor li tlameha ho sebelisoa ka tekanyo e tlase ea mocheso oa conductor oa 92 °C.
Pele O Qala
Sehlahisoa sena sa POINT I/O™ C se ka sebelisoa le tse latelang:
- Li-adapter tsa DeviceNet® le PROFIBUS
- Li-adapter tsa ControlNet® le EtherNet/IP™, li sebelisa mofuta oa 5000 oa Studio 20 Logix Designer® kopo kapa hamorao Sheba Figure 1 le Figure 2 ho tloaelana le likarolo tse kholo tsa module, ho hlokomela hore kopano ea wiring base ke e 'ngoe ea tse latelang:
- 1734-TB kapa 1734-TBS POINT I/O setsi sa liteishene tse peli, se kenyeletsang 1734-RTB terminal e ntshuwang le 1734-MB base
- 1734-TOP kapa 1734-TOPS POINT I/O setsi se le seng sa terminal
Setšoantšo sa 1 - POINT I/O 4 Channel High-Density Current Input Module e nang le 1734-TB kapa 1734-TBS Base
| Tlhaloso | Tlhaloso | ||
| 1 | Mochine oa ho notlela mojule | 6 | 1734-TB, 1734-TBS setsi se ntseng se hola |
| 2 | Leibole e ngoloang ka selaete | 7 | Likarolo tsa mahlakoreng tse hokahaneng |
| 3 | Mojule oa I/O o kentsoeng | 8 | Mechanical keying (orange) |
| 4 | Mohele oa "terminal block" o ka tlosoang (RTB). | 9 | DIN rail locking screw (orange) |
| 5 | RTB e nang le screw kapa spring clamp | 10 | Setšoantšo sa mohala oa mojule |
Setšoantšo sa 2 - POINT I/O 4 Channel High-Density Current Input Module e nang le 1734-TOP kapa 1734-TOPS Base
| Tlhaloso | Tlhaloso | ||
| 1 | Mochine oa ho notlela mojule | 6 | Likarolo tsa mahlakoreng tse hokahaneng |
| 2 | Leibole e ngoloang ka selaete | 7 | Mechanical keying (orange) |
| 3 | Mojule oa I/O o kentsoeng | 8 | DIN rail locking screw (orange) |
| 4 | Mohele oa "terminal block" o ka tlosoang (RTB). | 9 | Setšoantšo sa mohala oa mojule |
Kenya Setsi sa Mounting
Ho kenya setsi se ntseng se hola seporong sa DIN (karolo ea Allen-Bradley® 199-DR1; 46277-3; EN50022), tsoela pele ka tsela e latelang:
HLOKOMELA: Sehlahisoa sena se thehiloe ka terene ea DIN ho ea sebakeng sa chassis. Sebelisa seporo sa tšepe sa DIN se entsoeng ka zinc-plated chromate passivated steel ho netefatsa ho theoa ho nepahetseng. Tšebeliso ea lisebelisoa tse ling tsa terene tsa DIN (mohlalaample, aluminium kapa polasetiki) tse ka senyang, tsa oxidize, kapa li-conductor tse futsanehileng, li ka fella ka ho theoha ho sa lokelang kapa ka nakoana. Sireletsa seporo sa DIN ho ea holim'a metsi hoo e ka bang limilimithara tse ling le tse ling tse 200 (7.8 in.) 'me u sebelise li-ankora ka nepo. Etsa bonnete ba hore u theola seporo sa DIN hantle. Sheba Industrial Automation Wiring and Grounding Guidelines, sengoliloeng 1770-4.1, bakeng sa boitsebiso bo eketsehileng.
- Beha setsi se ntseng se hola ka holimo ho li-unit tse kentsoeng (adapter, phepelo ea motlakase kapa mojule o teng).
- Thellela setsi se ntseng se hola fatše ho lumella likotoana tsa mahlakoreng tse hokahaneng hore li hokahane le mojule kapa adaptara e haufi.
- Tobetsa ka tieo ho beha motheo oa seporo seporong sa DIN. The mounting base e kena sebakeng.
- Ho tlosa setsi se ntseng se hola ho tloha seporong sa DIN, tlosa mojule, 'me u sebelise screwdriver e nyane e nang le lehare ho potoloha sekoti sa ho notlela setsing ho ea sebakeng se otlolohileng. Sena se lokolla mochine oa ho notlela. Ebe o phahamisa ka ho toba ho tlosa.
Kenya Module
Module e ka kenngoa pele kapa ka mor'a ho kenya setsi. Etsa bonnete ba hore setsi sa ho kenya se kentsoe ka nepo pele u kenya module setsing sa ho kenya. Ho feta moo, etsa bonnete ba hore mounting base locking screw e behiloe referense e tšekaletseng ho base.
TLHOKOMELISO: Ha o kenya kapa o tlosa mojule ha motlakase oa backplane o ntse o butse, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele. Ho pheta-pheta arcing ea motlakase ho baka ho roala ho feteletseng ho likhokahano ho module le sehokelo sa eona sa ho nyalana. Mabitso a tsofetseng a ka baka ho hanyetsa motlakase ho ka amang ts'ebetso ea module.
- Ho sebelisa screwdriver e nang le bladed ho potoloha keyswitch botlaaseng bo ntseng bo eketseha ho fihlela palo e hlokahalang bakeng sa mofuta oa mojule o kentsoeng e lumellana le notch botlaaseng.
- Netefatsa hore sekoti sa ho notlela seporo sa DIN se maemong a tshekaletseng. haeba mochine oa ho notlela o notletsoe, u ke ke ua kenya module.
- Kenya module ka ho otloloha ka har'a setsi sa ho kenya ebe o tobetsa ho boloka. Mojule o notlella sebakeng.
Kenya Setsi sa Removable Terminal Block
Removable Terminal Block (RTB) e fanoa hammoho le kopano ea hau ea wiring base. Ho tlosa, hula holim'a mofeng oa RTB. Sena se lumella setsi se ntseng se phahama hore se tlosoe ebe se nkeloa sebaka ha ho hlokahala ntle le ho tlosa lithapo life kapa life. Ho kenya hape Removable Terminal Block, tsoela pele ka tsela e latelang:
- Kenya ntlha e shebaneng le mofeng ho setsi sa motheo. Qetello ena e na le karolo e kobehileng e sebetsanang le setsi sa wiring.
- Fetolela block block ho setsi sa lithapo ho fihlela e notlela sebakeng sa eona.
- Haeba mojule oa I/O o kentsoe, tlanya sebapali sa RTB sebakeng sa mojule.
TLHOKOMELISO: Ha o hokela kapa o hakolla Removable Terminal Block (RTB) o sebelisa matla a lehlakoreng la lebala, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi.
Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
TLHOKOMELISO: Bakeng sa 1734-RTBS le 1734-RTB3S, ho hokela le ho theolela terata, kenya screwdriver e nang le bladed (nomoro ea lethathamo la 1492-N90 - 3 mm bophara ba lehare) sebakeng se ka bang 73 ° (lehare le bapile le bokaholimo ba sebaka se bulehileng. ) ebe o sututsa ka bonolo.
TLHOKOMELISO: Bakeng sa 1734-TOPS le 1734-TOP3S, ho kenya le ho theola terata, kenya screwdriver e nang le bladed (nomoro ea lethathamo la 1492-N90 - 3 mm bophara) sebakeng se ka bang 97 ° (lehare le bapile le bokaholimo ba sebaka se bulehileng) ebe o tobetsa (o seke oa sutumelletsa holimo kapa tlase).
Tlosa Mounting Base
Ho tlosa setsi se ntseng se eketseha, o tlameha ho tlosa mojule ofe kapa ofe o kentsoeng, 'me mojule o kenngoe botlaaseng ho le letona. Tlosa Setsi sa Removable Terminal Block, haeba se kentsoe ka mohala.
- Tlosa mohele oa RTB mojulung oa I/O.
- Hula ka letsoho la RTB ho tlosa Removable Terminal Block.
- Tobetsa senotlolo sa mojule ka holimo ho mojule.
- Hula mojule oa I/O ho tlosa botlaaseng.
- Pheta mehato ea 1, 2, 3 le 4 bakeng sa mojule ka ho le letona.
- Sebelisa screwdriver e nyane e nang le lehare ho potoloha sekoere sa ho notlela sa orange ho ea sebakeng se otlolohileng. Sena se lokolla mochine oa ho notlela.
- Phahamisa ka kotloloho ho tlosa.
Kenya 1734-TOPS Base
- Beha setsi holimo ho li-unit tse kentsoeng, joalo ka adaptara, phepelo ea motlakase, kapa mojule o teng.
- Thellela setsi fatše, ho lumella likaroloana tsa mahlakoreng tse hokahaneng hore li kopane le yuniti e kentsoeng e haufi.
- Tobetsa ka tieo ho beha motheo holim'a seporo sa DIN ho fihlela setsi se oela sebakeng.
- Netefatsa hore sekoti sa ho notlela seporo sa DIN se sebakeng se tšekaletseng, se notletsoe pele o kenya mojule oa I/O.
Tlosa 1734-TOPS Base
- Ho tlosa setsi sa wiring seporong sa DIN, o tlameha ho tlosa module e kentsoeng ka ho le letona la setsi.
- Tobetsa mochine oa ho notlela oa mojule ka letsohong le letona la setsi, o hule ho tlosa mojule.
- Fetolela sekoti sa ho notlela sa lamunu hore se be boemong bo otlolohileng ho notlolla motheo ho tsoa seporong sa DIN.
- Thellela motheo hodimo ho e lokolla ho tswa ho diyuniti tsa yona tsa ho nyalana.
Tlanya Module
Chas Gnd = Chassis fatše C = Tloaelehileng
TLHOKOMELISO: Haeba o hokela kapa o hakolla terata ha motlakase o ntse o le ka lehlakoreng la lebala, ho ka ba le arc ea motlakase. Sena se ka etsa hore ho be le ho phatloha ho hoholo ha lisebelisoa tsa sebaka se kotsi. Etsa bonnete ba hore motlakase o tlositsoe kapa sebaka ha se kotsi pele o tsoela pele.
Setšoantšo sa Wiring
(1) 1734-VTM ke khetho. Sebelisa phepelo ea 24V DC ho tloha mojuleng oa 1734-VTM bakeng sa lisebelisoa tsa terata tse 2/3.
| Channel | Kenyo ea Hona Joale | Tloaelehileng | Khase Fatše |
| 0 | 0 | 4 kapa 5 | 6 kapa 7 |
| 1 | 1 | ||
| 2 | 2 | ||
| 3 | 3 |
12/24V DC e fanoa ke bese ea motlakase e ka hare.
Buisana le Module oa Hao
Li-module tsa POINT I/O li romela (ho ja) le ho amohela (hlahisa) data ea I/O (melaetsa). U beha lintlha tsena mohopolong oa processor.
Mojule ona oa ho kenya POINT I/O o hlahisa li-byte tse 12 tsa data ea ho kenya (scanner Rx) le data ea boemo ba phoso. Ha e sebelise data ea I/O (scanner Tx).
'Mapa oa Tlhahisoleseding oa 1734-IE4C, 1734-IE4CK Analog Input Module
Boholo ba molaetsa: 12 Byte
| 15 | 14 | 13 | 12 | 11 | 10 | 09 | 08 | 07 | 06 | 05 | 04 | 03 | 02 | 01 | 00 | |
| Lihlahisoa (scanner Rx) | Input Channel 0 High Byte | Input Channel 0 Low Byte | ||||||||||||||
| Input Channel 1 High Byte | Input Channel 1 Low Byte | |||||||||||||||
| Input Channel 2 High Byte | Input Channel 2 Low Byte | |||||||||||||||
| Input Channel 3 High Byte | Input Channel 3 Low Byte | |||||||||||||||
| Boemo ba Byte bakeng sa Channel 1 | Boemo ba Byte bakeng sa Channel 0 | |||||||||||||||
| OR | UR | HHA | LLA | HA | LA | CM | CF | OR | UR | HHA | LLA | HA | LA | CM | CF | |
| Boemo ba Byte bakeng sa Channel 3 | Boemo ba Byte bakeng sa Channel 2 | |||||||||||||||
| OR | UR | HHA | LLA | HA | LA | CM | CF | OR | UR | HHA | LLA | HA | LA | CM | CF | |
| Hokae = Boemo ba Phoso ea Channel; 0 = ha ho phoso, 1 = liphoso = Mokhoa oa ho lekanya; 0 = e tloaelehileng, 1 = mokhoa oa ho lekanya LA = Alamo e tlaase; 0 = ha ho phoso, 1 = phoso = Alamo e phahameng; 0 = ha ho phoso, 1 = phoso LA = Alamo e tlaase / e tlaase: 0 = ha ho phoso, 1 = phoso HHA = Alamo e Phahameng / e Phahameng; 0 = ha ho phoso, 1 = phoso ea UR = E sa tsitsa; 0 = ha ho phoso, 1 = phoso KAPA = Ho feta tekano; 0 = ha ho phoso, 1 = phoso | ||||||||||||||||
| Lisebelisoa (sekana Tx) | Ha ho na data e sebelisitsoeng | |||||||||||||||
Lipontšo tsa Boemo ba Toloko
Sheba Sets'oants'o sa 3 le Lethathamo la 1 ho fumana lintlha tsa ho toloka matšoao a boemo.
Setšoantšo sa 3 - Lipontšo tsa Boemo ba POINT I/O 4 Channel High Density Current Input Module
- Boemo ba Module
- Boemo ba Marang-rang
- Boemo ba ho Kena 0
- Boemo ba ho Kena 1
- Boemo ba ho Kena 2
- Boemo ba ho Kena 3
Lethathamo la 1 - Boemo ba Letšoao la Mojule
| Sesupo | Naha | Tlhaloso |
| Boemo ba module | E tima | Ha ho matla a sebelisoang sesebelisoa. |
| Botala | Sesebelisoa se sebetsa ka mokhoa o tloaelehileng. | |
| Botala bo benyang | Sesebelisoa se hloka ho sebelisoa ka lebaka la ho haella, ho sa fella, kapa litlhophiso tse fosahetseng. | |
| Bofubedu bo benyang | Phoso e ka phekolehang. | |
| Khubedu | Phoso e ke keng ea hlakoloa e ka hloka hore sesebelisoa se nkeloe sebaka. | |
| Ho benya bokgubedu/ botala | Sesebelisoa se maemong a ho itlhahloba. |
Letlapa la 1 - Boemo ba Letšoao la Mojule (E Tsoela Pele)
| Sesupo | Naha | Tlhaloso |
| Boemo ba marang-rang | E tima | Sesebelisoa ha se inthaneteng: - Sesebelisoa ha se e-so phethe tlhahlobo ea dup_MAC-id.- Sesebelisoa ha se na matla - lekola sesupo sa boemo ba module. |
| Botala bo benyang | Sesebelisoa se inthaneteng empa ha se na likhokahano sebakeng se seng se le teng. | |
| Botala | Sesebelisoa se inthaneteng 'me se na le likhokahano sebakeng se seng se le teng. | |
| Bofubedu bo benyang | Khokahano e le 'ngoe kapa tse ngata tsa I/O li nakong. | |
| Khubedu | Ho hloleha ha khokahanyo e kholo - sesebelisoa sa puisano se hlolehileng. Sesebediswa se fumane phoso e se thibelang ho buisana le netweke. | |
| Ho benya bokgubedu/ botala | Sesebelisoa se nang le phoso ea puisano - sesebelisoa se hlokometse phoso ea phihlello ea marang-rang mme se maemong a phoso ea puisano. Sesebelisoa se amohetse le ho amohela Kopo e Phoso ea Identity Communication - molaetsa o molelele oa protocol. | |
| Boemo ba kanale | E tima | Mojule ka mokhoa oa CAL. |
| Botala bo tiileng | Tloaelehileng (lisebelisoa tsa ho hlahloba kanale). | |
| Botala bo benyang | Channel e ntse e lokisoa. | |
| Bofubelu bo tiileng | Ha ho na matla kapa phoso e kholo ea mocha. | |
| Bofubedu bo benyang | Channel qetellong ea sebaka (0 mA kapa 21 mA). |
Litlhaloso
BOHLOKOA Sekhahla sa ntlafatso ea Kenyelletso le Karabelo ea Mohato bakeng sa li-module tsa 1734-IE4C le 1734-IE4CK li fapana le tsa li-module tsa catalogue 1734-IE2C le 1734-IE2CK.
Litlhaloso tsa ho Kena
| Tšobotsi | Boleng |
| Palo ea lisebelisoa | 4, e le 'ngoe, e sa khethe, ea hona joale |
| Qeto | 16 bits - ho feta 0…21 mA0.32 µA/cnt |
| Kenya terminal ea hajoale | 4…20 mA0…20 mA |
| Ho nepahala ho felletseng(1) Terminal ea hajoale | 0.1% Sekala se Feletseng @ 25 °C |
| Mohoho o nepahetseng ka mocheso. Theminale ea hona joale | 30 ppm/°C |
| Sekhahla sa ntlafatso, ho latela mojule | 240 ms @ Notch = 50 Hz200 ms @ Notch = 60 Hz (kamehla) 120 ms @ Notch = 100 Hz100 ms @ Notch = 120 Hz 60 ms @ Notch = 200 Hz 50 ms @ Notch = 240 ms 40 Hz 300 30 ms @ Notch = 400 Hz 25 ms @ Notch = 480 Hz |
| Karabelo ea mehato, ka kanale | 60 ms @ Notch = 50 Hz50 ms @ Notch = 60 Hz (kamehla) 30 ms @ Notch = 100 Hz25 ms @ Notch = 120 Hz 15 ms @ Notch = 200 Hz12.5 ms @ Notch = 240 Hz 10 s Hz300 ms @ Notch = 7.5 Hz400 ms @ Notch = 6.25 Hz |
| Kenyelletso/ho hanana | 60 Ω |
| Mofuta oa phetoho | Delta Sigma |
| Boemo bo tloaelehileng ba ho hana mekhoa | -120 dB |
Litlhaloso Tse Kenyelitsoeng (E Tsoela Pele)
| Tšobotsi | Boleng |
| Karolelano ea ho hana mokhoa o tloaelehileng | -60 dBNotch Sefe13.1 Hz @ Notch = 50 Hz15.7 Hz @ Notch = 60 Hz (ea kamehla)26.2 Hz @ Notch = 100 Hz31.4 Hz @ Notch = 120 Hz52.4 Hz @ Notch = 200 Hz62.9 Notch = 240 Hz78.6 Hz @ Notch = 300 Hz104.8 Hz @ Notch = 400 Hz125.7 Hz @ Notch = 480 Hz |
| Sebopeho sa data | Nomoro e saenneng |
| Boholo bo fetelletseng | Phoso e sirelelitsoe ho 28.8V DC |
| Tekanyetso | Feme e lekanngoe |
| Lipontšo, lehlakore la logic | 1 boemo ba marang-rang bo botala / bofubelu 1 boemo ba module e tala / khubelu 4 boemo ba ho kenya botala / bofubelu |
(1) E kenyelletsa mantsoe a phoso a offset, gain, non-linearity, le a pheta-phetoang.
BOHLOKOA Sheba Tataiso ea Khetho ea POINT I/O Modules, khatiso 1734-SG001 bakeng sa tlhahisoleseling mabapi le ho senya bese ea ho tsamaisa matla a tšimo. Sheba likarolo tse reng "Nako ea ho Sebelisa Tšimo ea Matla" le "Nako ea ho Sebelisa Setsi sa Matla a Katoloso".
Litlhaloso Kakaretso
| Tšobotsi | Boleng |
| Sethala sa setsi | 1734-TB3, 1734-TB3S kopano ea motheo ea lithapo |
| POINTBus™ hajoale, max | 75 mA |
| Ho felloa ke matla, max | 0.55 W @ 28.8V DC |
| Thermal dissipation, max | 2.0 BTU/hora @ 28.8V DC |
| Phepelo voltage, mokokotlo | 5V DC |
| Phepelo voltage range, ho kenya matla a tšimo | 10…28.8V DC, 20 mA, Sehlopha sa 2 |
| Kenya hona joale | 4…20 mA kapa 0…20 mA |
| Ho itšehla thajana voltage | 50V, e lekoa @ 1500V AC bakeng sa 60 s, li-input, le matla a tšimo ho tsamaiso Ha ho khethollo pakeng tsa lintho tse kenang ka bomong kapa ho kenya matla a sebaka. |
| Litekanyo (H x W x D), hoo e ka bang. | 56.0 x 12.0 x 75.5 mm (2.21 x 0.47 x 2.97 ho.) |
| Keyswitch boemo | 3 |
| Reiti ea mofuta oa sebaka | Ha ho letho (mokhoa o bulehileng) |
| Boholo ba terata | 0.25…2.5 limilimithara2 (22…14 AWG) terata e tiileng kapa e koetsoeng ea koporo e maemong a 100 °C (212 °F), kapa ho feta,1.2 mm (3/64 in.) max |
| Sehlopha sa lithapo(1) | 2 - likoung tsa matšoao 1 - likoung tsa matla |
| Mofuta oa mohala | Sireletsa |
| Terminal base screw torque | E khethoa ke "terminal block" e kentsoeng |
| Boima ba 'mele, hoo e ka bang. | 35 g (1.235 oz) |
| Khoutu ea mocheso ea Amerika Leboea | T4A |
| UKEX/ATEX khoutu ea mocheso | T4 |
| IECEx khoutu ea mocheso | T4 |
(1) Sebelisa tlhahisoleseding ena ea sehlopha sa conductor bakeng sa ho rera litsela tsa conductor joalokaha ho hlalositsoe ho Industrial Automation Wiring and Grounding Guidelines, khatiso 1770-4.1.
Litlhaloso tsa Tikoloho
| Tšobotsi | Boleng |
| Mocheso, ho sebetsa | IEC 60068-2-1 (Test Ad, Operating Cold),IEC 60068-2-2 (Test Bd, Operating Dry Heat),IEC 60068-2-14 (Test Nb, Operating Thermal Shock): -20 °C ≤ Ta ≤ +55 °C (-4 °F ≤ Ta ≤ + 131 °F) |
| Mocheso, moea o potolohileng, max | 55 °C (131 °F) |
| Mocheso, ho se sebetse | IEC 60068-2-1 (Teko ea Ab, e sa Paketehang e sa Paketeng e batang),IEC 60068-2-2 (Teko ea Bb, Mocheso o omileng o sa Kentsoeng),IEC 60068-2-14 (Tlhahlobo ea Na, e sa Paketehang Nonoperating Thermal Shock):-40 +85 °C (-40…+185 °F) |
| Mongobo o amanang | IEC 60068-2-30 (Teko ea Db, e sa pakeloang Damp Mocheso): 5…95% e sa tsitsang |
| Ho thothomela | IEC 60068-2-6, (Tlhahlobo Fc, E sebetsang): 5 g @ 10…500 Hz |
| Ho tšoha, ho sebetsa | IEC 60068-2-27 (Teko Ea, Tšabo e sa Paketehang): 30 g |
| Ho tšoha, ho se sebetse | IEC 60068-2-27 (Teko Ea, Tšabo e sa Paketehang): 50 g |
| Mesi | CISPR 11Sehlopha sa 1, Sehlopha sa A |
| Tšireletso ea ESD | IEC 61000-4-2: 6 kV puisano e ntša 8 kV ho tsoa moeeng |
| Tšireletso ea mahlaseli a RF | IEC 61000-4-3: 10V/m e nang le 1 kHz sine-wave 80% AM ho tloha 80…6000 MHz |
| Tšireletso ea EFT / B | IEC 61000-4-4: ± 3 kV ho 5 kHz boema-kepeng ba matla ± 3 kV ho 5 kHz likoung tsa matšoao |
| Ho itšireletsa mafung ka nakoana | IEC 61000-4-5: ± 1 kV line-line(DM) le ± 2 kV line-earth(CM) likoung tsa matla ± 2 kV line-earth(CM) likoung tse sirelelitsoeng |
| Ho tsamaisoa ha RF ho itšireletsa mafung | IEC 61000-4-6:10V rms e nang le 1 kHz sine-wave 80% AM @ 150 kHz…80 MHz |
Setifikeiti
| Setifikeiti (ha sehlahisoa se tšoailoe)(1) | Boleng |
| c-UL-rona | Thepa ea UL e thathamisitsoeng ea Taolo ea Indasteri, e netefalitsoeng bakeng sa US le Canada. Sheba UL File E65584.UL E thathamisitsoe bakeng sa Sehlopha sa I, Sehlopha sa 2 Sehlopha sa A,B,C,D Libaka tse Kotsi, tse netefalitsoeng bakeng sa US le Canada. Sheba UL File E194810. |
| UK le CE | UK Statutory Instrument 2016 No. 1091 le European Union 2014/30/EU EMC Directive, e lumellanang le: EN 61326-1; Meas./Control/Lab., Tlhokahalo ea Liindasteri Sen 61000-6-2; Tšireletso ea Liindasteri EN 61000-6-4; Phallo ea Liindasteri Sen 61131-2; Balaoli ba Lenaneo (Clause 8, Zone A le B)UK Statutory Instrument 2012 No. 3032 le European Union 2011/65/EU RoHS, e tsamaellanang le: EN IEC 63000; Litokomane tsa tekheniki |
| Ex | UK Statutory Instrument 2016 No. 1107 le European Union 2014/34/EU ATEX Directive, e lumellanang le: EN IEC 60079-0; Tlhokahalo e Akaretsang Sen IEC 60079-7; Sepakapaka se Phatlohileng, Tšireletso “e” II 3 G Ex ec IIC T4 Gc DEMKO 04 ATEX 0330347X UL22UKEX2478X |
| IECEx | Sistimi ea IECEx, e lumellanang le 60079-0; Litlhoko tse akaretsang tsa IEC 60079-7; Atmospheres E phatlohang, Tšireletso “e” II 3 G Ex ec IIC T4 IECEx UL 20.0072X |
| EAC | Russia Customs Union TR CU 020/2011 EMC Technical Regulation |
| Katoloso ea RCM | Molao oa Australian Radiocommunications Act, o tsamaellanang le: AS/NZS CISPR 11; Mesi ea Liindasteri |
Ditifikeiti (E tswelapele)
| Setifikeiti (ha sehlahisoa se tšoailoe)(1) | Boleng |
| KC | Ngodiso ya Korea ya Thepa ya Kgaso le Dikgokahanyo, e tsamaellanang le: Article 58-2 of Radio Waves Act, Clause 3 |
| Morocco | Arête minister n° 6404-15 du 29 Ramadan 1436 |
| CCC | CNCA-C23-01 CCC Kemiso ea ho Kenngwa ha Molao oa Ho phatloha-Bopaki ba Lihlahisoa tsa Motlakase CCC: 2020122309111607 |
(1) Sheba sehokelo sa Setifikeiti sa Sehlahisoa ho rok.auto/certifications bakeng sa Phatlalatso ea Tumellano, Litifikeiti, le lintlha tse ling tsa setifikeiti.
Rockwell Automation Support
Sebelisa lisebelisoa tsena ho fumana lintlha tsa tšehetso.
| Setsi sa Tšehetso ea Theknoloji | Fumana thuso ea ho etsa livideo, Lipotso, puisano, liforamu tsa basebelisi, Motheo oa Tsebo, le lintlafatso tsa tsebiso ka sehlahisoa. | rok.auto/support |
| Linomoro tsa Mohala tsa Tšehetso ea Theknoloji ea Libaka | Fumana nomoro ea mohala ea naha ea heno. | rok.auto/phonesupport |
| Setsi sa Litokomane tsa Teknoloji | Fumana ka potlako le ho khoasolla litlhaloso tsa tekheniki, litaelo tsa ho instola, le libuka tsa mosebelisi. | rok.auto/techdocs |
| Literature Library | Fumana litaelo tsa ho kenya, libuka, libukana, le lingoliloeng tsa boitsebiso ba theknoloji. | rok.auto/literature |
| Setsi sa Tšebelisano ea Sehlahisoa le ho Khoasolla (PCDC) | Khoasolla firmware, e amanang files (joalo ka AOP, EDS, le DTM), le ho fihlella lintlha tsa tokollo ea sehlahisoa. | rok.auto/pcdc |
Documentation Feedback
Maikutlo a hau a re thusa ho fana ka litlhoko tsa litokomane tsa hau hamolemo. Haeba u na le litlhahiso mabapi le mokhoa oa ho ntlafatsa litaba tsa rona, tlatsa foromo ho rok.auto/docfeedback.
Thepa ea Matla a Motlakase le Elektronike (WEEE)
Qetellong ea bophelo, lisebelisoa tsena li lokela ho bokelloa ka thoko ho litšila tse sa hlophisoang tsa masepala.
Rockwell Automation e boloka tlhaiso-leseling ea morao-rao ea tikoloho ea sehlahisoa ho eona website at rok.auto/pec.
Rockwell Tricare A.Ş. Kar Plaza Markaz E Blok Kat:6 34752 , İstanbul, Tel: +90 (216) 5698400 EE
Ikopanye le rona.
ho atolosa monyetla oa motho®
AMERICAS: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444 EUROPE/MIDDLE EAST/AFRICA: Rockwell Automation Park NV Keelan 12a, 1831 Diego, Belgium, Tel: (32)2 663 0600, Fax: (32)2 663 0640 ASIA PACIFIC: Rockwell Automation, Level 14, Core F, Cyber port 3, 100 Cyber port Road, Hong Kong. Mohala: (852) 2887 4788, Fax: (852) 2508 1846 UNITED KINGDOM: Rockwell Automation Ltd. Pittsfield, Kiln Farm Milton Keynes, MK11 3DR, United Kingdom, Mohala:(44)(1908) 838-800 44)(1908) 261-917
Allen-Bradley, ho atolosa menyetla ea batho, Factory Talk, POINT I/O, POINT Bus, Rockwell Automation, Studio 5000 Logix Designer, le Tech Connect ke matšoao a khoebo a Rockwell Automation, Inc. ControlNet, Device Net, le Ether Net/IP ke matšoao a khoebo. Litlhaloso tsa likarolo tsa ODVA, Inc.
Matšoao a khoebo ao e seng a Rockwell Automation ke thepa ea lik'hamphani tsa bona.
Phatlalatso 1734-IN032F-EN-P - September 2022 | Supersedes Publication 1734-IN032E-EN-P – Hlakubele 2021 Copyright © 2022 Rockwell Automation, Inc. Litokelo tsohle li sirelelitsoe.
Litokomane / Lisebelisoa
 |
Allen-Bradley POINT I/O 4 Channel High Density Current Input Modules [pdf] Buka ea Taelo 1734-IE4C, 1734-IE4CK, Series C, POINT IO 4 Channel High Density Input Modules, POINT IO 4, Channel High Density Current Input Modules, High Density Current Input Modules, Density Current Input Modules, Current Input Modules. Limojule |
