TiL T6 Analog Multiband RF Module
AMANOTHI
ISIXWAYISO SIYABONA !
Le yunithi iqukethe amadivaysi azwelayo amile. Gqoka ibhande lesihlakala eliphansi kanye/noma amagilavu abambayo
lapho uphatha amabhodi wesifunda aphrintiwe.
ULWAZI LOKUTHOBELA I-FCC
Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwezimo ezimbili ezilandelayo: (1) lolu cingo angeke lubangele ukuphazamiseka okuyingozi futhi (2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
ISEXWAYISO: Ngokuthobelana Nezidingo Zokuchayeka ze-FCC RF ukufakwa kwe-antenna yeselula kuzothobelana nalezi zimo ezimbili ezilandelayo:
- Ukuzuza kwe-antenna akumele kudlule u-3 dBi.
- Ama-antenna okuhambisa kufanele abekwe ngaphandle kwemoto futhi akumele abekwe ndawonye (agcinwe ebangeni elihlukanisayo elingaphezu kwama-20 cm ukusuka kwelinye lapho efakiwe). Futhi, kufanele zifakwe ngendlela yokuthi zihlale zigcina ibanga lokuhlukanisa elingaphezu kuka-113 cm kunoma yimuphi umuntu ngesikhathi sokusebenza.
QAPHELA: Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi A, ngokususelwe Engxenyeni 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi lapho okokusebenza kusebenza endaweni yezohwebo. Lokhu
Imishini ikhiqiza, isebenzise, futhi ingakhipha amandla efrikhwensi yomsakazo futhi, uma ingafakiwe futhi isetshenziswe ngokuhambisana nemanuwali yemiyalelo, ingabangela ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo.
Ukusebenza kwalesi sixhobo endaweni okuhlalwa kuyo kungase kubangele ukuphazamiseka okuyingozi, lapho umsebenzisi kuyodingeka ukuthi alungise ukuphazamiseka ngezindleko zakhe.
ISEXWAYISO KANYE NOMKHONDO
Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yi-Technisonic Industries kungase kuqede igunya lomsebenzisi lokusebenzisa okokusebenza.
Le manuwali yakhelwe ukuhlinzeka ngolwazi mayelana nemojula ye-T6 Multiband transceiver. Kwenziwe yonke imizamo yokwenza leli bhukwana liphelele futhi linembe ngangokunokwenzeka.
ULWAZI LWESIQINISEKISO
I-Model T6 Transceiver Module ingaphansi kwewaranti yonyaka owodwa kusukela ngedethi yokuthenga.
Amayunithi ahlulekile ngenxa yezingxenye ezinesici noma ukwakhiwa kufanele kubuyiselwe ku:
Ukulinganisa kwenkampani Technisonic Industries Limited
240 Abadayisi Boulevard
Mississauga, Ontario L4Z 1W7
Ucingo: 905-890-2113
Ifeksi: 905-890-5338
INCAZELO EJWAYELEKILE
ISINGENISO
Lolu shicilelo luhlinzeka ngolwazi lokusebenza lwemojula ye-T6 multiband transceiver.
DESCRIPTION
Imojula ye-T6 multiband transceiver yakhelwe ukuthi ifakwe kumsakazo we-multiband emoyeni njengenye yama-transceiver ochungechunge lwe-TDFM-9000. Imojula ye-T6 ingasebenza kumabhendi alandelayo:
| Ibhendi | I-Frequency Range | Ukushintshashintsha kwezwi | Ukusetshenziswa |
| I-VHF LO | 30 ukuze 50 MHz | FM | |
| I-VHF | 108 ukuze 118 MHz | AM | Ama-Beacons Wokuzulazula Thola kuphela |
| I-VHF | 118 ukuze 138 MHz | AM | I-Civilian Aeronautical Communications |
| I-UHF | 225 ukuze 400 MHz | AM | Ezokuxhumana Ngezindiza Zezempi |
Imojula ye-T6 ayinakho ukusebenzelana okubonakalayo komsebenzisi. Konke ukulawulwa kwemojula kwenziwa ngesixhumi esibonakalayo se-serial RS232. Imiyalo yokusebenza esigabeni 2 ithatha ukufakwa ku-transceiver ye-Technisonic TDFM-9100.
IMIYALELO YOKUSEBENZA
JIKELELE
Isibonisi se-LED, ikhiphedi, neknobhu ejikelezayo kunikeza isilawuli somsebenzisi samamojula e-RF afakwe kuyunithi. Imojuli ye-T6 izohlala iyibhendi 3. Isibonisi sibonisa umsebenzi wemojuli ekhethiwe kanye nemenyu kakhiye othambile webhendi esebenzayo. Imojuli esebenzayo ikhethwa ngokucindezela inkinobho ethi BAND. I-knob inemisebenzi eminingi ehlanganisa ivolumu, isiteshi, nendawo.
IPHEPHA ELIPHAMBILI
Bheka umdwebo ongezansi:
SHINTSHA AMANDLA
Ukuze uvule i-transceiver, cindezela bese ubamba iknobhu kuze kube yilapho umsakazo uvula amandla. Isibonisi sizobonisa i-TECHNISONIC kanye nenguqulo yesofthiwe efakiwe ilandelwe inombolo yemodeli, futhi yimaphi amamojula e-RF afakiwe. Isibonisi sizobe sesibonisa isibonisi esijwayelekile. Ukucisha i-transceiver nganoma yisiphi isikhathi, cindezela bese ubamba iknobhu imizuzwana emi-2 kuze kube isibuko sivela IVALIWE; bese uyakhulula. Uma kudingekile ukuthi umsakazo ube namandla ngomphathi werediyo endizeni, imodi 'ehlala ivuliwe' ingasethwa kokuthi Imenyu Yokulungiselela.
Ukulinganisa kwenkampani TECHNISONIC INDUSTRIES LIMITED
UKHOBHU
I-knob iyisishumeki esijikelezayo, esiphenduka ngokungapheli. I-knob nayo inenkinobho yokusunduza ehlanganisiwe ukuze ukwazi ukucindezela inkinobho futhi. Ukucindezela i-knob kuzoshintsha kumamodi e-knob angenzeka alandelayo:
- Ivolumu
- Isiteshi
- Indawo
- InomboloLokhi
- Khumbula
I-Band 3 (imojula ye-T6) isekela kuphela amamodi evolumu namakhinobhu wesiteshi.
Umsebenzi wamanje we-knob uboniswa ngezansi kwesokudla sesibonisi. Amanye alawa mamodi anganikwa amandla noma akhutshazwe kumenyu yokucushwa. I-knob isebenza kuphela kubhendi ekhethiwe.
IZIKHIYE EZINHLE NEKHAYA
Okhiye aba-3 abathambile ngaphansi kwesibonisi bathatha umsebenzi oboniswe kumenyu engenhla kwabo. Imisebenzi ebonisiwe incike ekutheni imojuli yahlelwa kanjani noma ukuthi iyiphi ibhendi ekhethiwe. Imojula ye-T6 kubhendi 3 izohlala inezinto zemenyu ezilandelayo:
I-PWR
- Ukukhetha i-PWR kuzovumela ukuphuma kwamandla omsakazo ukuthi kusethelwe phezulu noma phansi.
SKENA
- Ukukhetha UKUSKENA kuzofaka umsakazo kumodi yokuskena. Iziteshi ezengezwe ohlwini lokuskena zizoskenwa.
FPP
- Imodi ye-Front Panel Programming ikuvumela ukuthi uhlele amaza, igama, uhlu lokuskena, ithoni ye-PL kanye nekhodi ye-DPL yesiteshi samanje. Bheka isigaba 2.11.
Noma ngasiphi isikhathi ungomunye wale misebenzi, kuyenzeka ukuthi ubuyele kumodi evamile ngokucindezela inkinobho ethi HOME.
UKHIYE WEBHANDO
Le nkinobho ikhetha amabhendi (amamojula e-RF) 1 kuya ku-5. Izibonisi zamabhendi zihlukaniswa zibe amakhasi angu-3. Ikhasi 1 = amabhendi 1 no-2, ikhasi 2 = amabhendi 3 no-4, ikhasi 3 = ibhendi 5. Umcibisholo ukhomba ibhande elisebenzayo ekhasini lamanje. Ibhendi esebenzayo izophinde igqanyiswe imizuzwana embalwa ngenkathi ishintsha amabhendi.
I-MUP(4) KANYE NE-MDN(7) KHIYS (Inkumbulo Yaphezulu Naphansi Okhiye)
Laba okhiye bahlinzeka ngomsebenzi ofanayo njengoba iknob ejikelezayo yenza uma isethelwe ku-CHAN. Lezi zikhiye zingasetshenziswa ukupheqa eziteshini. Ukucindezela okukodwa kuzonyathela ishaneli ngakunye, kodwa ukucindezela nokubamba kuzoskrolela enombolweni yesiteshi oyifunayo. Umsebenzi weknob ejikelezayo usethelwe ku-CHAN okwesikhashana uma omunye walaba khiye ucindezelwa.
Okhiye BRT(6) KANYE NE-DIM(9)
Sebenzisa lezi zikhiye ukuze ufiphaze noma ukhanyise isibonisi. Umsakazo unika amandla ukukhanya okugcwele ukuze usetshenziswe okuvamile kodwa ungafiphazwa ukuze usebenze ebusuku.
BONISA
I-transceiver ine-LED enezinhlamvu ezintathu zezinhlamvu ezingu-72. Igama lendawo, igama lesiteshi, izimpawu zesimo (skena, qondisa, shayela, vikela, qapha, njll.), kanye nezilungiselelo zokushintsha kuzovezwa kumojuli ngayinye. Ibhendi esebenzayo iboniswa yisikhombisi ohlangothini lwesobunxele lwesibonisi. Umugqa ongezansi ubonisa izinto zemenyu ezihlobene nemojuli ekhethiwe kanye nemodi yeknobhu.
UKUSEBENZA OKUJWAYELEKILE
Vula i-transceiver ngokucindezela futhi ubambe inkinobho kuze kube yilapho isibonisi sikhanya. Khetha ibhendi oyifunayo ngokucindezela inkinobho ethi BAND. Njengoba kushiwo ku-2.6, amabhendi ahlukaniswe abe amakhasi angu-3 wokubonisa kucatshangwa ukuthi wonke amabhendi acushiwe kumenyu yokulungisa. Khetha i-TDFM-9100 kuphaneli yomsindo yendiza. Cindezela inkinobho futhi ukuze i-CHAN ibonakale ngezansi kwesokudla sesibonisi. Zungezisa inkinobho kuze kukhethwe isiteshi osifunayo noma iqembu lenkulumo. Cindezela inkinobho kuze kuphinde kuboniswe i-VOL esibukweni. Lungisa ivolumu ngokulinda kuze kutholakale isignali noma ngokucindezela u-F1 (ifekthri ehlelelwe umsebenzi wokuqapha) futhi ulungise i-rotary knob. Umsakazo usulungele ukusetshenziswa. Uma umsakazo ufakwe kwimodi ehlukene, khumbula ukuthi ibhendi ekhethwe okhiye abathambile imenyu evezwa esibukweni kodwa ibhendi ekhethwe iphaneli yomsindo ibhendi ethumelayo neyamukelayo. Ukusebenzisa ikhiphedi ye-DTMF ngenkathi uthumela, ibhendi esebenzayo kufanele ikhethwe esibukweni.
UHLELO LWEPHEPHA ELIPHAMBILI
I-Band 3 (T6) iyimojula ye-analog ye-multiband ehlanganisa amabhendi alandelayo:
- 30 - 50 MHz FM
- 108 – 118 MHz AM thola kuphela (ama-VOR okuzulazula, i-ILS, njll)
- 118 – 138 MHz AM (ibhendi yendiza)
- 225 – 400 MHz AM (ibhendi yendiza yezempi)
Ukukhetha imenyu ye-FPP kuzoqalisa inqubo elandelayo:
Imvamisa ye-RX
Imvamisa yokwamukela yesiteshi samanje izoboniswa ngokucwayiza kwedijithi yokuqala. Thayipha imvamisa oyifunayo noma vele ucindezele inkinobho yemenyu ethi 'Okulandelayo' ngaphandle kwezinguquko. I-frequency kufanele ibe kobunye bobubanzi obalwe ngenhla. Uma kufakwa ifrikhwensi engavumelekile, umsakazo uzobuyela emuva kufrikhwensi ehlelwe ngaphambilini. Ukucindezela ukhiye wemenyu ethi 'Phuma' noma ukhiye HOME noma nini kuzophunyuka inqubo yokuhlela futhi kubuyisele umsakazo kumodi yokusebenza evamile. Cindezela okuthi 'Okulandelayo' noma inkinobho ukuze uye entweni elandelayo.
I-TX Frequency
Imvamisa yokudlulisa ingahlelwa ngendlela efanayo nefrikhwensi ye-RX.
I-RX CTCSS
Amabhendi e-VHF LO nawe-UHF kuphela. Thola ithoni ye-CTCSS (eyaziwa nangokuthi ithoni ye-PL noma ye-TPL) izoboniswa. Zungezisa inkinobho yethoni oyifunayo noma 'VALA.' Cindezela inkinobho noma inkinobho yemenyu ethi 'Okulandelayo'.
I-RX DCS
Amabhendi e-VHF LO nawe-UHF kuphela. I-RX DCS izovela kuphela uma i-RX CTCSS isethwe kokuthi 'VALIWE.' Ikhodi ye-DCS eyamukelayo (eyaziwa nangokuthi ikhodi ye-DPL) izoboniswa. Zungezisa ifindo kukhodi oyifunayo noma 'VALIWE.' Ukukhetha UKUVALA kuzomisa isiteshi sibe yi-squelch yenkampani yenethiwekhi kuphela. Cindezela inkinobho noma inkinobho yemenyu ethi 'Okulandelayo'.
I-TX CTCSS
Amabhendi e-VHF LO nawe-UHF kuphela. Ithoni yokudlulisa ye-CTCSS izoboniswa. Zungezisa inkinobho yethoni oyifunayo noma 'VALA.' Cindezela inkinobho noma inkinobho yemenyu ethi 'Okulandelayo'.
I-TX DCS
Amabhendi e-VHF LO nawe-UHF kuphela. I-TX DCS izovela kuphela uma i-TX CTCSS isethwe ukuze ithi 'VALIWE.' Ikhodi yokudlulisa ye-DCS izoboniswa. Zungezisa ifindo kukhodi oyifunayo noma 'VALIWE.' Ukukhetha ukuvala kuzomisa isiteshi ukuba sibe inkampani yenethiwekhi kuphela. Cindezela inkinobho noma inkinobho yemenyu ethi 'Okulandelayo'.
Igama lesiteshi
Igama lesiteshi lizovezwa. Hlela igama lesiteshi ngokuzungezisa inkinobho ukuze ukhethe uhlamvu olufunayo. Cindezela inkinobho ukuze uthuthukele kuhlamvu olulandelayo. Igama linezinhlamvu ezingu-9 ubude.
Cindezela inkinobho kanye futhi umsakazo uzobuyela kumodi yokusebenza evamile.
Okulandelayo uhlu lwamathoni asekelwayo e-CTCSS/PL/TPL anamakhodi ahambisanayo e-Motorola PL:
ITHEBULA 1: TDFM-9100 CTCSS/PL/TPL Tones vs Motorola PL Codes
| I-PL (Hz) | I-MCODE | I-PL (Hz) | I-MCODE | I-PL (Hz) | I-MCODE | I-PL (Hz) | I-MCODE | |||
| 67.0 | XZ | 97.4 | ZB | 141.3 | 4A | 206.5 | 8Z | |||
| 69.3 | WZ | 100.0 | 1Z | 146.2 | 4B | 210.7 | M2 | |||
| 71.9 | XA | 103.5 | 1A | 151.4 | 5Z | 218.1 | M3 | |||
| 74.4 | WA | 107.2 | 1B | 156.7 | 5A | 225.7 | M4 | |||
| 77.0 | XB | 110.9 | 2Z | 162.2 | 5B | 229.1 | 9Z | |||
| 79.7 | WB | 114.8 | 2A | 167.9 | 6Z | 233.6 | M5 | |||
| 82.5 | YZ | 118.8 | 2B | 173.8 | 6A | 241.8 | M6 | |||
| 85.4 | YA | 123.0 | 3Z | 179.9 | 6B | 250.3 | M7 | |||
| 88.5 | YB | 127.3 | 3A | 186.2 | 7Z | 254.1 | OZ | |||
| 91.5 | ZZ | 131.8 | 3B | 192.8 | 7A | I-CSQ | I-CSQ | |||
| 94.8 | ZA | 136.5 | 4Z | 203.5 | M1 |
Okulandelayo uhlu lwe-TDFM-9100 asekelwa amaKHODI e-DCS/DPL:
ITHEBULA 2: TDFM-9100 DCS/DPL Amakhodi
| 023 | 072 | 152 | 244 | 343 | 432 | 606 | 723 |
| 025 | 073 | 155 | 245 | 346 | 445 | 612 | 731 |
| 026 | 074 | 156 | 251 | 351 | 464 | 624 | 732 |
| 031 | 114 | 162 | 261 | 364 | 465 | 627 | 734 |
| 032 | 115 | 165 | 263 | 365 | 466 | 631 | 743 |
| 043 | 116 | 172 | 265 | 371 | 503 | 632 | 754 |
| 047 | 125 | 174 | 271 | 411 | 506 | 654 | |
| 051 | 131 | 205 | 306 | 412 | 516 | 662 | |
| 054 | 132 | 223 | 311 | 413 | 532 | 664 | |
| 065 | 134 | 226 | 315 | 423 | 546 | 703 | |
| 071 | 143 | 243 | 331 | 431 | 565 | 712 |
IMIYALELO YOKUFAKA
JIKELELE
I-T6 Module iklanyelwe ukufakwa ku-chassis yomsakazo we-Technisonic airborne njengendlela yokukhetha ukusabalala kwamafrikhwensi okunwetshiwe. Le chassis yomsakazo ihlanganisa, kodwa ayikhawulelwe kumamodeli we-Technisonic transceiver TDFM-9100, TDFM-9200 kanye ne-TDFM-9300. Ukufakwa kwe-TDFM-9100 kuboniswe ngezansi. Ezinye ziyefana kakhulu.
I-T6 ihloselwe ukufakwa ku-chassis ye-TDFM 9300/9200 noma 9100 futhi ayibonakali. Ngakho-ke, ilebula yesibili kufanele isetshenziswe ngaphandle kwe-TDFM-9X00 equkethe umbhalo olandelayo:
- Ku-TDFM-9300 “TDFM 9300 Multiband, “Iqukethe Imojuli: I-ID ye-FCC IMA-T6”
- Ku-TDFM-9200 “TDFM 9200 Multiband, “Iqukethe Imojuli: I-ID ye-FCC IMA-T6”
- Ku-TDFM-9100 “TDFM 9100 Multiband, “Iqukethe Imojuli: I-ID ye-FCC IMA-T6”
Ukwengeza, ukulebula kwangaphandle kwe-Industrial Canada kuzosetshenziswa ku-TDFM-9300, TDFM-9200, TDFM-9100 kanye namayunithi abasingathi besikhathi esizayo. Ilebula yangaphandle izofaka umbhalo olandelayo:
- Ku-TDFM-9300 “TDFM 9300 Multiband, “Iqukethe i-IC: 120A-T6”
- Ku-TDFM-9200 “TDFM 9200 Multiband, “Iqukethe i-IC: 120A-T6”
- Ku-TDFM-9100 “TDFM 9100 Multiband, “Iqukethe i-IC: 120A-T6”
Inhlanganisela yokugcina/yemojula nayo idinga ukuhlaziya ngokuqhathanisa nemibandela ye-FCC Ingxenye 15B yamarediyetha angahlosiwe ukuze agunyazwe ngokufanelekile ukuze asebenze njengedivayisi yedijithali Ingxenye 15.
FAKA IBHODI LE-INTERFACE
Ibhodi lesixhumi esibonakalayo lidingeka kuphela ku-TDFM-9100 Transceiver.
Susa ikhava ephezulu bese ufaka umhlangano webhodi lesixhumi esibonakalayo 203085.
FAKA IMODULI ye-T6
Faka imojuli endaweni yethreyi ephezulu uqinisekisa ukuxhumana okusekhanda okufanele.
Faka izikulufu ezi-4 ezibambe ithreyi yemojuli.
Faka izikulufu zekhanda ezingama-hex angu-6 ebhulokhini likasinki wokushisa.
Xhuma i-antenna coax njengoba kukhonjisiwe ngenhla.
Faka ikhava entsha ephezulu #218212.
UKUHLANGANYELA KOKUGCINA NOKUHLOLA
Yenza inqubo yokugcina yokuqondisa imodeli ye-transceiver efanele.
Yenza inqubo yokugcina yokuhlola yemodeli ye-transceiver efanele.
IMICIMBI
Amadokhumenti / Izinsiza
 |
TiL T6 Analog Multiband RF Module [pdf] Incwadi Yeziqondiso T6, IMA-T6, IMAT6, T6 Analog Multiband RF Module, T6 RF Module, Analog Multiband RF Module, Multiband RF Module, Analog Multiband Module, RF Module, Module |
