NATIONAL INSTRUMENTS FP-AI-110 Eight-Channel 16-Bit Analog Input Modules
Ulwazi Lomkhiqizo
I-FP-AI-110 kanye ne-cFP-AI-110 aneshaneli eyisishiyagalombili, amamojula wokufaka we-analog angu-16-bit aklanyelwe ukusetshenziswa nohlelo lwe-FieldPoint. Lawa mamojula ahlinzeka ngezilinganiso zokufakwayo ezinembile nezithembekile zezinhlelo zokusebenza ezihlukahlukene.
Izici
- Iziteshi zokufaka ze-analog eziyisishiyagalombili
- ukulungiswa kwe-16-bit
- Ihambisana nezisekelo zetheminali ze-FieldPoint kanye nezindiza ezingemuva ze-Compact FieldPoint
- Ukufakwa kalula nokumisa
Imiyalo yokusetshenziswa komkhiqizo
Ifaka i-FP-AI-110
- Shelelezisa ukhiye wesisekelo setheminali uye ku-X noma endaweni 1.
- Qondanisa izindawo zokuqondanisa ze-FP-AI-110 namareyili angumhlahlandlela kusisekelo setheminali.
- Cindezela ngokuqinile ukuze uhlalise i-FP-AI-110 kusisekelo setheminali.
Ifaka i-cFP-AI-110
- Qondanisa izikulufu ezithunjiwe ku-cFP-AI-110 nezimbobo kundiza engemuva.
- Cindezela ngokuqinile ukuze uhlale i-cFP-AI-110 endizeni engemuva.
- Qinisa izikulufu ezibanjiwe usebenzisa i-screwdriver yenombolo engu-2 Phillips nge-shank okungenani engu-64 mm (2.5 in.) ubude ukuya ku-torque engu-1.1 Nm (10 lb in.).
Ifaka izintambo i-[c]FP-AI-110
Uma ufaka izintambo i-FP-AI-110 noma i-cFP-AI-110, kubalulekile ukulandela le mihlahlandlela:
- Faka i-fuse engu-2 A ephezulu, esebenza ngokushesha phakathi kwamandla angaphandle kanye netheminali engu-V esiteshini ngasinye.
- Ungaxhumi kokubili okwamanje kanye nevolumutage okokufaka esiteshini esifanayo.
- Amandla okuphuma phakathi kwamamojula amabili ahlula ukuhlukaniswa phakathi kwalawo mamojula. Amandla okuphuma kumojula yenethiwekhi ahlula konke ukuhlukaniswa phakathi kwamamojula ebhange le-FieldPoint.
Bheka kuThebula 1 ngezabelo zetheminali ezihlobene nesiteshi ngasinye.
| Izinombolo zetheminali | Isiteshi | I-VIN | IIN | I-VSUP | COM |
|---|---|---|---|---|---|
| 0 | 1 | 2 | 17 | 18 | |
| 1 | 3 | 4 | 19 | 20 | |
| 2 | 5 | 6 | 21 | 22 | |
| 3 | 7 | 8 | 23 | 24 | |
| 4 | 9 | 10 | 25 | 26 | |
| 5 | 11 | 12 | 27 | 28 | |
| 6 | 13 | 14 | 29 | 30 | |
| 7 | 15 | 16 | 31 | 32 |
Qaphela: Faka i-2 A, i-fuse esebenza ngokushesha kutheminali ngayinye ye-VIN, itheminali ngayinye ye-IIN, kanye nefuse engu-2 A ephezulu, esebenza ngokushesha kutheminali ngayinye ye-VSUP.
Le miyalo yokusebenza ichaza indlela yokufaka nokusebenzisa amamojula wokufaka we-analog we-FP-AI-110 ne-cFP-AI-110 (okubhekiselwa kuwo ngokuhlangene njenge-[c]FP-AI-110). Ukuze uthole ulwazi mayelana nokulungisa kanye nokufinyelela i-[c]FP-AI-110 ngenethiwekhi, bheka imanuwali yomsebenzisi yemojuli yenethiwekhi ye-FieldPoint oyisebenzisayo.
Izici
I-[c]FP-AI-110 iyimojuli yokufaka ye-FieldPoint analog enezici ezilandelayo:
- Ivolumu ye-analog eyisishiyagalombilitage noma amashaneli okufakwayo amanje
- Ivolumu yesishiyagalombilitagizigaba zokufaka: 0–1 V, 0–5 V, 0–10 V, ±60 mV,
- ± 300 mV, ±1V, ±5V, kanye ±10 V
- Ububanzi bokufakwayo obuthathu bamanje: 0–20, 4–20, kanye no-±20 mA
- ukulungiswa kwe-16-bit
- Izilungiselelo zokuhlunga ezintathu: 50, 60, kanye no-500 Hz
- I-250 Vrms CAT II eqhubekayo yokuhlukaniswa kwesiteshi kuya phansi, kuqinisekiswe ukuhlolwa kwe-dielectric ukumelana ne-2,300 Vrms
- -40 kuya ku-70 °C ukusebenza
- Okushisayo-okushintshwayo
Ifaka i-FP-AI-110
I-FP-AI-110 igibelela kusisekelo setheminali ye-FieldPoint (FP-TB-x), enikeza amandla okusebenza kumojula. Ukufaka i-FP-AI-110 kusizinda setheminali esinamandla akuphazamisi ukusebenza kwebhange le-FieldPoint.
Ukufaka i-FP-AI-110, bheka uMdwebo 1 bese uqedela lezi zinyathelo ezilandelayo:
- Shelelezisa ukhiye wesisekelo setheminali kunoma iyiphi indawo X (esetshenziselwa noma iyiphi imojuli) noma indawo 1 (esetshenziselwa i-FP-AI-110).
- Qondanisa izindawo zokuqondanisa ze-FP-AI-110 namareyili angumhlahlandlela kusisekelo setheminali.
- Cindezela ngokuqinile ukuze uhlalise i-FP-AI-110 kusisekelo setheminali. Uma i-FP-AI-110 ihlezi iqinile, i-latch kusisekelo setheminali iyikhiya endaweni.
- I/O Imojuli
- Isisekelo Sokugcina
- Ukuqondanisa Slot
- Ukhiye
- Latch
- Guide Rails
Ifaka i-cFP-AI-110
I-cFP-AI-110 igibelela kundiza yangemuva ye-Compact FieldPoint (cFP-BP-x), ehlinzeka ngamandla okusebenza kumojula. Ukufaka i-cFP-AI-110 endizeni engemuva enamandla akuphazamisi ukusebenza kwebhange le-FieldPoint.
Ukufaka i-cFP-AI-110, bheka uMdwebo 2 bese uqedela lezi zinyathelo ezilandelayo:
- Qondanisa izikulufu ezithunjiwe ku-cFP-AI-110 nezimbobo kundiza engemuva. Okhiye bokuqondanisa ku-cFP-AI-110 bavimbela ukufakwa emuva.
- Cindezela ngokuqinile ukuze uhlale i-cFP-AI-110 endizeni engemuva.
- Usebenzisa i-screwdriver yenombolo engu-2 ye-Phillips ene-shank okungenani engu-64 mm (2.5 in.) ubude, qinisa izikulufu ezibanjiwe zibe ngu-1.1 N ⋅ m (10 lb ⋅ in.) wetorque. Ukufakwa kwezikulufu zenayiloni kuzivimbela ukuthi zingaxegi.
- cFP-DI-300
- Izikulufo ezithunjiwe
- I-cFP Controller Module
- Izikulufa Izimbobo
- I-cFP Backplane
Ifaka izintambo i-[c]FP-AI-110
Itheminali ye-FP-TB-x inokuxhumana kweshaneli ngayinye kwayisishiyagalombili okokufaka kanye nokokuphakela amandla kwangaphandle kumadivayisi enkambu yamandla. Ibhulokhi yesixhumi se-cFP-CB-x inikeza ukuxhumana okufanayo. Isiteshi ngasinye sinamatheminali ahlukene wokufaka wevoltagOkokufaka kwe-e (VIN) kanye nokwamanje (IIN). Voltage kanye nokokufaka kwamanje kubhekiselwa kumatheminali e-COM, axhumeke ngaphakathi kwelinye kanye namatheminali C. Wonke amatheminali ayisishiyagalombili e-VSUP axhumeke ngaphakathi komunye nomunye kanye nasezikhungweni ze-V.
Ungasebenzisa i-10–30 VDC enikeziwe yangaphandle kumadivayisi enkundla yamandla.
Xhuma ugesi wangaphandle kumatheminali amaningi we-V kanye ne-VSUP ukuze amandla amanje kakhulu kunoma iyiphi indawo ye-V abe ngu-2 A noma ngaphansi futhi umkhawulo wamanje kunoma iyiphi itheminali ye-VSUP ube ngu-1 A noma ngaphansi.
Faka i-fuse engu-2 A ephezulu, esebenza ngokushesha phakathi kwamandla angaphandle kanye netheminali engu-V esiteshini ngasinye. Imidwebo yezintambo kule dokhumenti ibonisa ama-fuse lapho kufanele khona.
Ithebula 1 libala izabelo zetheminali zamasignali ahlobene nesiteshi ngasinye. Izabelo zetheminali ziyafana kumatheminali e-FP-TB-x kanye namabhulokhi okuxhuma i-cFP-CB-x.
Ithebula 1. Izabelo Zetheminali
|
Isiteshi |
Isikhumulo Izinombolo | |||
| VIN1 | IIN2 | 3
VSUP |
COM | |
| 0 | 1 | 2 | 17 | 18 |
| 1 | 3 | 4 | 19 | 20 |
| 2 | 5 | 6 | 21 | 22 |
| 3 | 7 | 8 | 23 | 24 |
| 4 | 9 | 10 | 25 | 26 |
| 5 | 11 | 12 | 27 | 28 |
| 6 | 13 | 14 | 29 | 30 |
| 7 | 15 | 16 | 31 | 32 |
| 1 Faka i-2 A, i-fuse esebenza ngokushesha ku-V ngayinyeIN Isikhumulo.
2 Faka i-2 A, i-fuse esebenza ngokushesha ku-I ngayinyeIN Isikhumulo. 3 Faka ifuse engu-2 A ephezulu, esebenza ngokushesha ku-V ngayinyeSUP Isikhumulo. |
||||
- Isexwayiso Ungaxhumi kokubili okwamanje kanye nevolumutage okokufaka esiteshini esifanayo.
- Isexwayiso Amandla okuphuma phakathi kwamamojula amabili ahlula ukuhlukaniswa phakathi kwalawo mamojula. Amandla okuphuma kumojula yenethiwekhi ahlula konke ukuhlukaniswa phakathi kwamamojula ebhange le-FieldPoint.
Ukuthatha Izilinganiso nge-[c]FP-AI-110
I-[c]FP-AI-110 ineziteshi eziyisishiyagalombili zokufaka eziphela kanye. Zonke iziteshi eziyisishiyagalombili zabelana ngereferensi evamile ehlukanisiwe kwamanye amamojula ohlelweni lwe-FieldPoint. Umfanekiso 3 ubonisa ukujikeleza kokufaka kwe-analog esiteshini esisodwa.
Ukulinganisa Umqtage nge-[c]FP-AI-110
Ububanzi bokufaka kwe-voltagamasignali e-e angu-0–1 V, 0–5 V, 0–10 V, 60 mV, ±300 mV, ±1V, ±5 V, kanye ne-±10 V.
Umfanekiso 4 ukhombisa indlela yokuxhuma ivolumutagumthombo ongenamandla angaphandle esiteshini esisodwa se-[c]FP-AI-110.
Umfanekiso 5 ukhombisa indlela yokuxhuma ivolumutagumthombo onamandla angaphandle esiteshini esisodwa se-[c]FP-AI-110.
Ukulinganisa Kwamanje nge-[c]FP-AI-110
- Ububanzi bokufakwayo bemithombo yamanje bungu-0–20, 4–20, kanye no-±20 mA.
- Imojula ifunda okugeleza kwamanje kutheminali ye-IIN njengokuphozithivu futhi okwamanje kuphuma kutheminali njengenegethivu. Yamanje igelezela kutheminali ye-IIN, idlule ku-100 Ω resistor, futhi igeleza isuka kutheminali ye-COM noma C.
- Umfanekiso wesi-6 ubonisa indlela yokuxhuma umthombo wamanje ngaphandle kwamandla angaphandle esiteshini esisodwa se-[c]FP-AI-110.
Umfanekiso 7 ubonisa indlela yokuxhuma umthombo wamanje namandla angaphandle esiteshini esisodwa se-[c]FP-AI-110.
Okokufaka Amabanga
Ukuze uvimbele ukufundwa okungalungile, khetha ububanzi bokufaka ngendlela yokuthi isignali oyilinganisayo ingeqi noma ikuphi umkhawulo wobubanzi.
Ukulenga ngokweqile
I-[c]FP-AI-110 inesici esilengayo esikala kancane kunamanani avamile obubanzi obunye. Okwesiboneloample, umkhawulo wangempela wokulinganisa wobubanzi obungu-±10 V ngu-±10.4 V. Isici esilengayo sinika amandla i-[c]FP-AI-110 ukunxephezela amadivayisi enkambu anamaphutha e-span afika ku-+4% wesilinganiso esigcwele. Futhi, ngesici esilengayo, isignali enomsindo eduze kwesikali esigcwele ayiwadali amaphutha okulungisa.
Isihlungi Izilungiselelo
Izilungiselelo zokuhlunga ezintathu ziyatholakala esiteshini ngasinye. Izihlungi eziteshini zokufakwayo ze-[c]FP-AI-110 ziyizihlungi zekamu ezinikeza amanotshi okunqatshelwa kokuphindaphindeka, noma ama-harmonics, okuvama okuyisisekelo. Ungakhetha imvamisa eyisisekelo engu-50, 60, noma engu-500 Hz. I-[c]FP-AI-110 isebenzisa u-95 dB wokwenqatshwa kufrikhwensi eyisisekelo kanye nokunqatshwa okungenani okungu-60 dB ku-harmonics ngayinye. Ezimweni eziningi, izingxenye eziningi zomsindo zamasiginali okokufaka zihlobene nemvamisa yolayini wamandla we-AC wendawo, ngakho ukulungiselelwa kwesihlungi se-50 noma 60 Hz kungcono kakhulu.
Isilungiselelo sokuhlunga sinquma izinga i-[c]FP-AI-110 sampkancane okokufaka. I-[c]FP-AI-110 resampinciphisa zonke iziteshi ngenani elifanayo. Uma usetha zonke iziteshi kusihlungi esingu-50 noma esingu-60 Hz, i-[c]FP-AI-110 sampkwehlisa isiteshi ngasinye njalo ngo-1.470 s noma njalo ngo-1.230 s, ngokulandelana. Uma usetha zonke iziteshi zibe izihlungi ezingu-500 Hz, imojuli sampinciphisa isiteshi ngasinye njalo ngo-0.173 s. Uma ukhetha izilungiselelo zokuhlunga ezihlukene zamashaneli ahlukene, sebenzisa ifomula elandelayo ukuze unqume u-sampisilinganiso sezilimi.
- (inani lamashaneli anesihlungi esingu-50 Hz) ×184 ms +
- (inani lamashaneli anesihlungi esingu-60 Hz) ×154 ms +
- (inani lamashaneli anesihlungi esingu-500 Hz) × 21.6 ms = Izinga Lokubuyekeza
Uma ungasebenzisi ezinye zeziteshi ze-[c]FP-AI-110, zibeke kusilungiselelo sokuhlunga esingu-500 Hz ukuze uthuthukise isikhathi sokuphendula semojuli. Okwesiboneloample, uma isiteshi esisodwa sisethelwe isihlungi esingu-60 Hz, kanti ezinye iziteshi eziyisikhombisa zisethelwe ku-500 Hz, imojula s.ampnciphisa isiteshi ngasinye njalo ngemizuzwana engu-0.3 (ngokushesha ngokuphindwe kane kunesimo lapho zonke iziteshi eziyisishiyagalombili zisethelwe kusilungiselelo esingu-60 Hz).
I-sampling rate alithinti izinga lapho imojuli yenethiwekhi ifunda khona idatha. I-[c]FP-AI-110 ihlala inedatha etholakalayo ukuze ifundwe imojuli yenethiwekhi; i-sampling rate izinga lapho le datha ibuyekezwa khona. Setha isicelo sakho ukuze i-sampisilinganiso se-ling siyashesha kunesilinganiso lapho imojuli yenethiwekhi ivotela khona i-[c]FP-AI-110 yedatha.
Izinkomba Zesimo
I-[c]FP-AI-110 inama-LED amabili asesimweni esiluhlaza, AMANDLA kanye ne-READY. Ngemva kokufaka i-[c]FP-AI-110 kusisekelo setheminali noma indiza engemuva futhi usebenzise amandla kumojuli yenethiwekhi exhunyiwe, izibani ze-POWER LED eziluhlaza kanye ne-[c]FP-AI-110 zazisa imojuli yenethiwekhi ngobukhona bayo. Uma imojuli yenethiwekhi ibona i-[c]FP-AI-110, ithumela ulwazi lokuqala lokucushwa ku-[c]FP-AI-110. Ngemva kokuthi i-[c]FP-AI-110 ithola lolu lwazi lokuqala, izibani ze-LED eziluhlaza READY LED kanye nemojuli kumodi yokusebenza evamile. I-LED ecwayizayo noma engakhanyi i-READY ibonisa isimo sephutha.
Ukuthuthukisa iFirmware ye-FieldPoint
Ungase udinge ukuthuthukisa i-firmware ye-FieldPoint uma wengeza amamojula amasha e-I/O ohlelweni lwe-FieldPoint. Ukuze uthole ulwazi mayelana nokunquma ukuthi iyiphi i-firmware oyidingayo nokuthi ungayithuthukisa kanjani i-firmware yakho, vakashela ku ni.com/info bese ufaka i-fpmatrix.
Imihlahlandlela Yokuzihlukanisa Nezokuphepha
Isexwayiso Funda ulwazi olulandelayo ngaphambi kokuzama ukuxhuma i-[c]FP-AI-110 kunoma imaphi amasekhethi okungenzeka aqukethe i-hazardous vol.tages.1
Lesi sigaba sichaza ukuhlukaniswa kwe-[c]FP-AI-110 nokuthobelana kwayo nezindinganiso zokuphepha zamazwe ngamazwe. Izixhumanisi zezintambo zasensimini zihlukanisiwe nendiza engemuva kanye nebhasi lokuxhumana lamamojula. Izithiyo zokuzihlukanisa kumojula zinikeza i-250 Vrms Measurement Category II eqhubekayo ye-channel-to-backplane kanye nokuhlukaniswa kwesiteshi kuya phansi, okuqinisekiswe yi-2,300 Vrms, i-5 s dielectric test test.2 I-[c]FP-AI-110 inikeza ukufakwa okuphindwe kabili (ihambisana ne-IEC 61010-1) ye
- Ivolumu eyingozitage yi-voltage enkulu kuno-42.4 Vpeak noma 60 VDC. Lapho ivolumu eyingozitagI-e ikhona kunoma yisiphi isiteshi, wonke amashaneli kufanele athathwe njengaphethe ivolumu eyingozitages. Qinisekisa ukuthi zonke izifunda ezixhunywe kumojula azifinyeleleki ekuthinteni komuntu.
- Bheka I-Safety Isolation Voltage ukuze uthole ulwazi olwengeziwe mayelana nokuzihlukanisa ku-[c]FP-AI-110.
Ukusebenza voltages of 250 Vrms
Amazinga okuphepha (njengalawo ashicilelwe yi-UL kanye ne-IEC) adinga ukusetshenziswa kokufakwa kabili phakathi kwevolthi eyingozi.tages kanye nanoma yiziphi izingxenye noma amasekhethi okufinyeleleka kuwo abantu.
Ungalokothi uzame ukusebenzisa noma imuphi umkhiqizo wokuhlukanisa phakathi kwezingxenye okufinyeleleka kuzo abantu (njengamareyili e-DIN noma iziteshi zokuqapha) namasekhethi angaba yingozi ngaphansi kwezimo ezivamile, ngaphandle uma umkhiqizo uklanyelwe lolu hlelo lokusebenza ngokuqondile, njengoba kunjalo ne-[c] I-FP-AI-110.
Noma i-[c]FP-AI-110 yakhelwe ukuphatha izinhlelo zokusebenza ezinamandla okuba yingozi, landela le mihlahlandlela ukuze uqinisekise isistimu ephelele ephephile:
- Akukho ukwehlukana phakathi kwamashaneli ku-[c]FP-AI-110. Uma ivolumu eyingozitagi-e ikhona kunoma yisiphi isiteshi, zonke iziteshi zithathwa njengeziyingozi. Qinisekisa ukuthi wonke amanye amadivaysi namasekhethi axhunywe kumojula avaleleke ngendlela efanele ekuxhumaneni nabantu.
- Ungabelani ngevolumu yangaphandletages (amatheminali e-V no-C) namanye amathuluzi (okuhlanganisa namanye amadivaysi e-FieldPoint), ngaphandle uma lawo madivaysi ehlukanisiwe ekuthinteni abantu.
- Ku-Compact FieldPoint, kufanele uxhume itheminali yaphansi yomhlaba ovikelayo (PE) kundiza yangemuva ye-cFP-BP-x endaweni yokuphepha yesistimu. Itheminali yasemuva ye-PE inophawu olulandelayo u-stamped eceleni kwayo:. Xhuma itheminali yaphansi ye-PE engemuva endaweni yokuphepha yesistimu usebenzisa intambo engu-14 AWG (1.6 mm) enelugi yokukhala. Sebenzisa isikulufu se-panhead esingu-5/16 in. esihanjiswe ngendiza yangemuva ukuze uvikele isikhwama sendandatho kutheminali yaphansi ye-PE engemuva.
- Njenganoma iyiphi ivolumu eyingozitage-wiring, qiniseka ukuthi zonke izintambo nezixhumo zihlangabezana namakhodi asebenzayo kagesi kanye nezinqubo ze-commonsense. Faka izisekelo zamatheminali kanye nezindiza ezingemuva endaweni, indawo, noma ikhabethe elivimbela ukufinyelela ngengozi noma okungagunyaziwe kuzintambo ezinevolyumu eyingozi.tages.
- Ungayisebenzisi i-[c]FP-AI-110 njengokuphela komgoqo ohlukanisayo phakathi kokuxhumana nabantu kanye nevolumu yokusebenza.tagingaphezulu kuka-250 Vrms.
- Sebenzisa i-[c]FP-AI-110 kuphela noma ngaphansi kweDigri Yokungcoliswa Kwemvelo 2. Ukungcoliswa Kweziqu 2 kusho ukuthi ukungcola okungenakuziphatha kuphela okwenzeka ezimweni eziningi. Ngezinye izikhathi, nokho, ukuqhutshwa kwesikhashana okubangelwa ukufingqa kufanele kulindelwe
- Sebenzisa i-[c]FP-AI-110 esigabeni sokukala II noma ngaphansi. Isigaba Sokulinganisa II singokwezilinganiso ezenziwa kumasekhethi axhumeke ngokuqondile ku-low-voltage ukufakwa. Lesi sigaba sisho ukusatshalaliswa kwezinga lendawo, njengalokho okunikezwa i-outlet evamile yodonga
Izinkombandlela Zokuphepha Ezindaweni Eziyingozi
I-[c]FP-AI-110 ifanele ukusetshenziswa ku-Class I, Division 2, Groups A, B, C, kanye no D ezindaweni eziyingozi; Ikilasi 1, Zone 2, AEx nC IIC T4 kanye ne-Ex nC IIC T4 izindawo eziyingozi; nezindawo ezingenabungozi kuphela. Landela le mihlahlandlela uma ufaka i-[c]FP-AI-110 endaweni engase ibe nokuqhuma. Ukwehluleka ukulandela lezi ziqondiso kungase kubangele ukulimala okubi kakhulu noma ukufa.
- Isexwayiso Unganqamuli izintambo noma izixhumi ze-I/O-side ngaphandle uma amandla ecishiwe noma indawo yaziwa ngokuthi ayinabungozi.
- Isexwayiso Ungawasusi amamojula ngaphandle uma amandla ecishiwe noma indawo yaziwa ngokuthi ayinabungozi.
- Isexwayiso Ukushintshwa kwezingxenye kungase kukhinyabeze ukufaneleka Kwekilasi I, Isigaba 2.
- Isexwayiso Ngezinhlelo zokusebenza ze-Zone 2, faka isistimu ye-Compact FieldPoint endaweni ebiyelwe elinganiselwe okungenani ku-IP 54 njengoba kuchazwe yi-IEC 60529 kanye ne-EN 60529.
Izimo Ezikhethekile Zokusetshenziswa Okuphephile eYurophu
Lezi zisetshenziswa zihlolwe njengezisetshenziswa ze-EEx nC IIC T4 ngaphansi kwe-DEMKO Certificate No. 03 ATEX 0251502X. Imojula ngayinye imakwe i-II 3G futhi ifanele ukusetshenziswa ezindaweni eziyingozi ze-Zone 2.
Isexwayiso Kuzinhlelo zokusebenza ze-Zone 2, amasiginali axhunyiwe kufanele abe ngaphakathi kwemikhawulo elandelayo
- Amandla……………………….. 20 μF ubuningi
- I-inductance……………………….0.2 H max
Imihlahlandlela yokuphepha ye-Hazardous Voltages
Uma kuyingozi voltages exhunywe kumojula, thatha izinyathelo zokuphepha ezilandelayo. Ivolumu eyingozitage yi-voltagengaphezulu kuka-42.4 Vpeak noma 60 VDC emhlabeni
- Isexwayiso Qinisekisa ukuthi ivolumu eyingozitagIzintambo zikagesi zenziwa kuphela ngabasebenzi abaqeqeshiwe abanamathela ezindinganisweni zikagesi zasendaweni.
- Isexwayiso Ungahlanganisi ivolumu eyingozitagamasekhethi e-e namasekhethi okufinyeleleka kuwo abantu kumojula efanayo.
- Isexwayiso Qinisekisa ukuthi amadivaysi namasekhethi axhunywe kumojula avaleleke ngendlela efanele ekuxhumaneni nabantu.
- Isexwayiso Uma amatheminali kubhulokhi yesixhumi ebukhoma ngevolthi eyingozitages, qiniseka ukuthi amatheminali awafinyeleleki.
Imininingwane
Ukucaciswa okulandelayo kujwayelekile kububanzi -40 kuya ku-70 °C ngaphandle uma kuphawulwe ngenye indlela. Amaphutha okuzuza anikezwa njengephesentitagi-e yenani lesiginali yokufaka. Imininingwane ingashintsha ngaphandle kwesaziso.
Izimpawu zokufaka
- Inani lamashaneli .…………………… .8
- Isixazululo se-ADC………………………………… amabhithi ayi-16 ku-50 noma ku-60 Hz; Amabhithi ayi-10 ku-500 Hz
- Uhlobo lwe-ADC.…………………………………Delta-sigma
Ukulungiswa okusebenzayo ngobubanzi besiginali yokufaka kanye nesethi yesihlungi
|
Ngokuzisholo Ibanga Lokufaka |
Nge Iyadlula |
Isebenza kahle Isixazululo ngo50 noma
Isihlungi esingu-60 Hz Sinikwe amandla* |
Isebenza kahle Isixazululo ngo-500 Hz noma Asikho Isihlungi Esivunyelwe* | |
| Voltage | ±60 mV
±300 mV ±1 V ±5 V ±10 V 0–1 V 0-5 V 0-10 V |
±65 mV
±325 mV ±1.04 V ±5.2 V ±10.4 V 0–1.04 V 0-5.2 V 0-10.4 V |
3 mV
16 mV 40 mV 190 mV 380 mV 20 mV 95 mV 190 mV |
25 mV
100 mV 300 mV 1,500 mV 3,000 mV 300 mV 1,500 mV 3,000 mV |
| Okwamanje | 0-20 mA
4-20 mA ± 20 mA |
0-21 mA
3.5-21 mA ± 21 mA |
0.5 mA
0.5 mA 0.7 mA |
15 mA
15 mA 16 mA |
| * Kufaka phakathi amaphutha okulinganisa kanye nomsindo we-rms. | ||||
Izici zokufaka ngokusetha kwesihlungi
|
Isici |
Isihlungi Izilungiselelo | ||
| 50 Hz | 60 Hz | 500 Hz | |
| Buyekeza izinga* | 1.470 s | 1.230 s | 0.173 s |
| Ukulungiswa okusebenzayo | 16 amabhithi | 16 amabhithi | 10 amabhithi |
| I-bandwidth yokokufaka (–3 dB) | 13 Hz | 16 Hz | 130 Hz |
| * Kusebenza uma wonke amashaneli ayisishiyagalombili asethelwe esilungiselelweni esifanayo sokuhlunga. | |||
- Ukwenqatshwa kwemodi evamile…………………… 95 dB (enesihlungi esingu-50/60 Hz)
- Ukungalandeli umugqa ………………………………..0.0015% (i-monotonicity1 iqinisekisiwe ngebanga lokushisa elisebenzayo)
Voltage Okokufaka
- I-impedance yokokufaka……………………………..>100 MΩ
- I-Overvoltagukuvikelwa …………………±40 V
Isici se-ADC lapho ukuphuma kwekhodi yedijithali kukhuphuka njalo njengoba inani lokokufaka kwe-analog kuyo likhuphuka.
Okokufaka kwamanje
- 25 °C.………………………………………… 400 pA uhlobo, 1 nA max
- 70 °C……………………………………….3 nA typ, 15 nA max
Umsindo wokufakwayo (enesihlungi esingu-50 noma esingu-60 Hz esinikwe amandla)
- ± 60 mV ububanzi.……………………….±3 LSB1 iqophelo ukuya phezulu
- ±300 mV ububanzi………………………………………………………………………………………………………………………………………
- Obunye ububanzi ………………………….±1 LSB ukuphakama-kuya-peak
Ukunemba okujwayelekile nokuqinisekisiwe ngebanga lokokufaka kanye nebanga lokushisa
|
Ngokuzisholo Ibanga Lokufaka |
Okujwayelekile Ukunemba ngo-15 kuya ku-35 °C (% of Reading;
% Yesikali Esigcwele) |
Igunyazwe Ukunemba ngo-15 kuya ku-35 °C
(% of Reading; % Yesikali Esigcwele) |
| ±60 mV | ±0.04%; ±0.05% | ±0.05%; ±0.3% |
| ±300 mV | ±0.04%; ±0.015% | ±0.06%; ±0.1% |
| ±1 V | ±0.04%; ±0.008% | ±0.05%; ±0.04% |
| ±5 V | ±0.04%; ±0.005% | ±0.06%; ±0.02% |
| ±10 V | ±0.04%; ±0.005% | ±0.06%; ±0.02% |
| 0-1 V | ±0.04%; ±0.005% | ±0.05%; ±0.03% |
| 0-5 V | ±0.04%; ±0.003% | ±0.06%; ±0.01% |
| 0-10 V | ±0.04%; ±0.003% | ±0.06%; ±0.01% |
|
Ngokuzisholo Ibanga Lokufaka |
Okujwayelekile Ukunemba ngo-40 kuya ku-70 °C (% of Reading;
% Yesikali Esigcwele) |
Igunyazwe Ukunemba ngo-40 kuya ku-70 °C (% of Reading;
% Yesikali Esigcwele) |
| ±60 mV | ±0.06%; ±0.35% | ±0.10%; ±1.5% |
| ±300 mV | ±0.07%; ±0.08% | ±0.11%; ±0.40% |
| ±1 V | ±0.06%; ±0.03% | ±0.10%; ±0.13% |
| ±5 V | ±0.07%; ±0.01% | ±0.11%; ±0.04% |
| ±10 V | ±0.07%; ±0.01% | ±0.11%; ±0.03% |
|
Ngokuzisholo Ibanga Lokufaka |
Okujwayelekile Ukunemba ngo-40 kuya ku-70 °C (% of Reading;
% Yesikali Esigcwele) |
Igunyazwe Ukunemba ngo-40 kuya ku-70 °C (% of Reading;
% Yesikali Esigcwele) |
| 0-1 V | ±0.06%; ±0.025% | ±0.10%; ±0.12% |
| 0-5 V | ±0.07%; ±0.007% | ±0.11%; ±0.03% |
| 0-10 V | ±0.07%; ±0.005% | ±0.11%; ±0.02% |
Qaphela Isikali esigcwele yinani eliphakeme lobubanzi bokufakwayo okulinganiselwe. Okwesiboneloample, kububanzi bokufaka okungu-±10 V, isikali esigcwele singu-10 V kanye no-±0.01% wesikali esigcwele ngu-1 mV
- Thola iphutha lokuhamba …………………………….±20 ppm/°C
- Iphutha le-offset Drift Ngo-50 noma 60 Hz isihlungi sinikwe amandla.…………………………±6 μV/°C
- Ngesihlungi esingu-500 Hz esinikwe amandla ………±15 μV/°C
Okokufaka Kwamanje
- I-impedance yokokufaka……………………………..60–150 Ω
- I-Overvoltagukuvikelwa …………………±25 V
- Umsindo wokufakwayo (50 noma 60 Hz isihlungi) ………0.3 μA rms
Ukunemba okujwayelekile nokuqinisekisiwe ngokwebanga lokushisa
| Okujwayelekile Ukunemba ngo-15 kuya ku-35 °C
(% of Reading; % of Full Scale) |
Igunyazwe Ukunemba ngo-15 kuya ku-35 °C
(% of Reading; % of Full Scale) |
| ±0.08%; ±0.010% | ±0.11%; ±0.012% |
| Okujwayelekile Ukunemba ngo-40 kuya ku-70 °C
(% of Reading; % of Full Scale) |
Igunyazwe Ukunemba ngo-40 kuya ku-70 °C
(% of Reading; % of Full Scale) |
| ±0.16%; ±0.016% | ±0.3%; ±0.048% |
- Iphutha le-offset drift.………………………….±100 nA/°C
- Thola ukushayela kwephuthat …………………………….±40 ppm/°C
Izici Zomzimba
Izinkomba ………………………………………… AMANDLA Aluhlaza kanye nezinkomba ezithi READY
Isisindo
- I-FP-AI-110………………………………..140 g (4.8 oz)
- cFP-AI-110………………………………… 110 g (3.7 oz)
Izidingo zamandla
- Amandla avela kumojula yenethiwekhi ………… 350 mW
Safety Isolation Voltage
Ukuhlukaniswa kwesiteshi kuya phansi
Okuqhubekayo ………………………………250 Vrms, Isigaba Sokulinganisa II
I-Dielectric ukumelana………………..2,300 Vrms (ubude besikhathi sokuhlola amasekhondi angu-5)
Ukuhlukaniswa kwesiteshi nesiteshi .………..Akukho ukwehlukana phakathi
iziteshi
Ezemvelo
Amamojula we-FieldPoint enzelwe ukusetshenziswa endlini kuphela. Ukuze zisetshenziswe ngaphandle, kufanele zifakwe ngaphakathi kwendawo ebiyelwe evalekile.
- Izinga lokushisa lokusebenza ………………….–40 kuya ku-70 °C
- Izinga lokushisa lesitoreji ………………………..–55 kuya ku-85 °C
- Umswakamo .………………………………………… 10 kuya ku-90% RH, ukunganciphisi
- Ukuphakama okukhulu…………………………..2,000 m; ezindaweni eziphakeme i-isolation voltagizilinganiso kufanele zehliswe.
- Iziqu Zokungcolisa …………………………….2
Ukushaqeka Nokudlidliza
Lezi zincazelo zisebenza kuphela ku-cFP-AI-110. I-NI incoma i-Compact FieldPoint uma uhlelo lwakho lokusebenza lungaphansi kokushaqeka nokudlidliza. Ukudlidliza okusebenzayo, okungahleliwe
- (IEC 60068-2-64)………………………………10–500 Hz, 5 grms Ukudlidliza okusebenzayo, i-sinusoidal
- (IEC 60068-2-6)……………………………..10–500 Hz, 5 g
Ukushaqeka okusebenzayo
- (IEC 60068-2-27)……………………………… 50 g, 3 ms half sine, 18 ukushaqeka ezindaweni eziyisi-6; 30 g, 11 ms isigamu sine, 18 ukushaqeka kuma-orientation angu-6
Ukuphepha
Lo mkhiqizo uklanyelwe ukuhlangabezana nezidingo zamazinga alandelayo okuphepha ezisetshenziswa zikagesi ukuze zikalwe, zilawule, futhi zisetshenziswe elabhorethri:
- I-IEC 61010-1, EN 61010-1
- I-UL 61010-1
- CAN/CSA-C22.2 No. 61010-1
Ukuze uthole i-UL, indawo eyingozi, nezinye izitifiketi zokuphepha, bheka ilebula yomkhiqizo noma vakashela ku-ni.com/certification, sesha ngenombolo yemodeli noma umugqa womkhiqizo, bese uchofoza isixhumanisi esifanele kukholomu yesitifiketi.
I-Electromagnetic Compatibility
Ukukhishwa kwekhabhoni………………………………………EN 55011 Ikilasi A ku-10 m FCC Ingxenye 15A ngaphezu kuka-1 GHz
Ukungavikeleki……………………………………….EN 61326:1997 + A2:2001,
I-CE, C-Tick, kanye ne-FCC Ingxenye 15 (Ikilasi A) Iyathobelana
Qaphela Ngokuhambisana ne-EMC, kufanele usebenzise lolu cingo ngekhebula evikelekile
CE Ukuhambisana
- Lo mkhiqizo uhlangabezana nezidingo ezibalulekile ezisebenzayo
- I-European Directives, njengoba ichitshiyelwe ekumaka kwe-CE, kanjena:
- I-Low-Voltage Directive (ukuphepha)………73/23/EEC
I-Electromagnetic Compatibility
- I-Directive (EMC) …………………………….89/336/EEC
Qaphela Bheka ku-Declaration of Conformity (DoC) kulo mkhiqizo ukuze uthole noma yiluphi ulwazi olwengeziwe lokuthobela imithetho. Ukuze uthole i-DoC yalo mkhiqizo, vakashela ni.com/certification, sesha ngenombolo yemodeli noma umugqa womkhiqizo, bese uchofoza isixhumanisi esifanele kukholomu yesitifiketi.
Ubukhulu Bomshini
Umfanekiso 8 ubonisa ubukhulu bemishini ye-FP-AI-110 efakwe kusisekelo setheminali. Uma usebenzisa i-cFP-AI-110, bheka imanuwali yomsebenzisi yesilawuli se-Compact FieldPoint ukuze uthole ubukhulu nezimfuneko zokuvunyelwa kwekhebula zohlelo lwe-Compact FieldPoint.
Ungayaphi Ukuze Uthole Usekelo
Ukuze uthole ulwazi olwengeziwe mayelana nokumisa uhlelo lwe-FieldPoint, bheka le mibhalo Yezinsimbi Zikazwelonke:
- Incwadi yomsebenzisi yemojuli yenethiwekhi ye-FieldPoint
- Eminye imiyalelo yokusebenza kwemojuli ye-FieldPoint I/O
- Isisekelo setheminali ye-FieldPoint kanye nemiyalo yokusebenza yebhulokhi yesixhumi
Iya ku ni.com/supportt kumamanuwali amanje kakhulu, isbamples, kanye nolwazi lokuxazulula inkinga
Ikomkhulu le-National Instruments corporate litholakala ku-11500 North Mopac Expressway, Austin, Texas, 78759-3504. I-National Instruments inamahhovisi atholakala emhlabeni jikelele ukusiza ukubhekana nezidingo zakho zosekelo. Ukuze uthole ukusekelwa ngocingo e-United States, dala isicelo sakho sesevisi ku-ni.com/support bese ulandela imiyalelo yokushaya ucingo noma ushayele okuthi 512 795 8248. Ukuze uthole ukusekelwa ngocingo ngaphandle kwase-United States, thintana nehhovisi legatsha langakini:
- Australia 1800 300 800, Austria 43 0 662 45 79 90 0,
- EBelgium 32 0 2 757 00 20, Brazil 55 11 3262 3599,
- Canada 800 433 3488, China 86 21 6555 7838,
- I-Czech Republic 420 224 235 774, Denmark 45 45 76 26 00,
- I-Finland 385 0 9 725 725 11, France 33 0 1 48 14 24 24,
- Germany 49 0 89 741 31 30, India 91 80 51190000,
- Israel 972 0 3 6393737, Italy 39 02 413091,
- Japan 81 3 5472 2970, Korea 82 02 3451 3400,
- Lebanon 961 0 1 33 28 28, Malaysia 1800 887710,
- Mexico 01 800 010 0793, Netherlands 31 0 348 433 466,
- New Zealand 0800 553 322, Norway 47 0 66 90 76 60,
- Poland 48 22 3390150, Portugal 351 210 311 210,
- I-Russia 7 095 783 68 51, Singapore 1800 226 5886,
- I-Slovenia 386 3 425 4200, eNingizimu Afrika 27 0 11 805 8197,
- Spain 34 91 640 0085, Sweden 46 0 8 587 895 00,
- ISwitzerland 41 56 200 51 51, Taiwan 886 02 2377 2222,
- Thailand 662 278 6777, United Kingdom 44 0 1635 523545
I-National Instruments, NI, ni.com, kanye ne-LabVIEW yizimpawu zokuthengisa ze-National Instruments Corporation. Bheka ku-
Isigaba seMigomo Yokusebenzisa ku-ni.com/legal ukuze uthole ulwazi olwengeziwe mayelana nezimpawu zokuthengisa ze-National Instruments. Eminye imikhiqizo namagama ezinkampani ashiwo lapha yizimpawu zokuhweba noma amagama okuhweba ezinkampani zawo.
Ngamalungelo obunikazi amboza imikhiqizo Yezinsimbi Zesizwe, bheka indawo efanele: Usizo»Amalungelo obunikazi kusofthiwe yakho, i-patents.txt file ku-CD yakho, noma ni.com/patents.
IZINKONZO EZIQHUBEKILE
Sinikezela ngezinsizakalo ezincintisanayo zokulungisa nokulinganisa, kanye nemibhalo efinyeleleka kalula nezinsiza ezilandekayo mahhala.
THEngisa ENGAZI YAKHO
- Sithenga izingxenye ezintsha, ezisetshenzisiwe, ezingasasebenzi, nezingeziwe kulo lonke uchungechunge lwe-NI
- Sisebenzela isixazululo esingcono kakhulu esifanelana nezidingo zakho.
- Thengisa Ngemali
- Thola Ikhredithi
- Thola Idili Lokuhwebelana
I-OOOLETE NI I-hardware ESESITOKWENI FUTHI ILUNGELE UKUTHUMISWA
Sigcina i-Hardware Entsha, Entsha, Evuselelwe kabusha, neReconditioned NI.
Cela ikhotheshini ( https://www.apexwaves.com/modular-systems/national-instruments/fieldpoint/FP-AI-110?aw_referrer=pdf )~ CHOFOZA I-FP-Al-110
Ukuvala igebe phakathi komkhiqizi kanye nesistimu yakho yokuhlola ifa.
Zonke izimpawu zokuthengisa, amabhrendi, namagama ebhrendi kuyimpahla yabanikazi bazo.
Amadokhumenti / Izinsiza
 |
NATIONAL INSTRUMENTS FP-AI-110 Eight-Channel 16-Bit Analog Input Modules [pdf] Incwadi Yeziqondiso FP-AI-110, cFP-AI-110, Eight-Channel 16-Bit Analog Amamojula, FP-AI-110 Eight-Channel 16-Bit Amamojula Wokokufaka we-Analog, 16-Bit Amamojula Wokokufaka we-Analog, Amamojula Okokufaka kwe-Analog, Amamojula Okokufaka , Amamojula |
