IZIXHOBO ZIKAZWELONKE I-FP-AI-110 Isibhozo-Isibhobho se-16-Bit yokufaka iimodyuli ze-Analog
Ulwazi lweMveliso
I-FP-AI-110 kunye ne-cFP-AI-110 zizibhobho ezisibhozo, iimodyuli ze-analog ze-16-bit ezilungiselelwe ukusetyenziswa kunye nenkqubo ye-FieldPoint. Ezi modyuli zibonelela ngemilinganiselo echanekileyo kunye nethembekileyo yegalelo le-analog kwiintlobo ezahlukeneyo zezicelo.
Iimbonakalo
- Imijelo ye-analog esibhozo
- Isisombululo se-16-bit
- Iyahambelana neziseko zeterminal yeFieldPoint kunye neCompact FieldPoint backplanes
- Ufakelo olulula kunye noqwalaselo
Imiyalelo yokusetyenziswa kwemveliso
Ukufakela i-FP-AI-110
- Slayidela iqhosha lesiseko seterminal ukuya nokuba kukwindawo X okanye kwindawo yesi-1.
- Ukulungelelanisa iindawo zokubeka i-FP-AI-110 kunye nemigaqo yesikhokelo kwisiseko se-terminal.
- Cinezela ngokuqinileyo ukuze uhlale i-FP-AI-110 kwisiseko se-terminal.
Ukufakela i-cFP-AI-110
- Ukulungelelanisa izikrufu ezithinjiweyo kwi-cFP-AI-110 kunye nemingxuma kwi-backplane.
- Cinezela ngokuqinileyo ukuze uhlale i-cFP-AI-110 kwi-backplane.
- Qinisa izikrufu ezithinjiweyo usebenzisa inombolo ye-2 Phillips screwdriver eneshank ubuncinane ye-64 mm (2.5 in.) ubude ukuya kwi-torque ye-1.1 Nm (10 lb in.).
Ukufaka ucingo kwi [c]FP-AI-110
Xa udibanisa i-FP-AI-110 okanye i-cFP-AI-110, kubalulekile ukulandela ezi zikhokelo:
- Faka i-2 A ephezulu, i-fuse esebenza ngokukhawuleza phakathi konikezelo lwamandla lwangaphandle kunye ne-terminal V kwitshaneli nganye.
- Musa ukudibanisa zombini yangoku kunye ne-voltagigalelo kwitshaneli enye.
- Amandla e-Cascading phakathi kweemodyuli ezimbini zoyisa ukwahlukana phakathi kwezo modyuli. Amandla eCascading ukusuka kwimodyuli yenethiwekhi yoyisa konke ukwahlula phakathi kweemodyuli kwibhanki yeFieldPoint.
Jonga kuTheyibhile 1 ngezabelo zetheminali ezinxulumene nejelo ngalinye.
| Amanani etheminali | Umjelo | VIN | IIN | VSUP | COM |
|---|---|---|---|---|---|
| 0 | 1 | 2 | 17 | 18 | |
| 1 | 3 | 4 | 19 | 20 | |
| 2 | 5 | 6 | 21 | 22 | |
| 3 | 7 | 8 | 23 | 24 | |
| 4 | 9 | 10 | 25 | 26 | |
| 5 | 11 | 12 | 27 | 28 | |
| 6 | 13 | 14 | 29 | 30 | |
| 7 | 15 | 16 | 31 | 32 |
Phawula: Faka i-2 A, i-fuse esebenza ngokukhawuleza kwi-terminal nganye ye-VIN, i-terminal nganye ye-IIN, kunye ne-2 A ubuninzi, i-fuse esebenza ngokukhawuleza kwi-terminal nganye ye-VSUP.
Le miyalelo yokusebenza ichaza indlela yokufaka nokusebenzisa i-FP-AI-110 kunye ne-cFP-AI-110 iimodyuli zokufakwa kwe-analog (ebhekiselwa kuzo ngokuqukeneyo njenge- [c] FP-AI-110). Ngolwazi malunga nokuqwalasela kunye nokufikelela kwi [c]FP-AI-110 ngaphezulu komsebenzi womnatha, bhekisa kwincwadi yomsebenzisi yemodyuli yomsebenzi womnatha weFieldPoint oyisebenzisayo.
Iimbonakalo
I [c]FP-AI-110 yimodyuli ye-analog ye-FieldPoint enezi mpawu zilandelayo:
- I-analog esibhozo voltage okanye amajelo akhoyo ngoku
- Ibhobho yesibhozotagUluhlu lwegalelo e-e: 0–1 V, 0–5 V, 0–10 V, ± 60 mV,
- ± 300 mV, ±1V, ±5V, kunye ±10 V
- Iintlobo ezintathu zegalelo zangoku: 0-20, 4-20, kunye ne-±20 mA
- Isisombululo se-16-bit
- Iisetingi ezintathu zokucoca: 50, 60, kunye ne500 Hz
- I-250 Vrms CAT II eqhubekayo yokwahlukaniswa kwetshaneli ukuya emhlabeni, ingqinwe yi-2,300 Vrms dielectric teststanding test
- -40 ukuya 70 °C ukusebenza
- Ishushu-eguquguqukayo
Ukufakela i-FP-AI-110
I-FP-AI-110 ikhwela kwi-FieldPoint terminal base (FP-TB-x), enika amandla okusebenza kwimodyuli. Ukufakela i-FP-AI-110 kwisiseko se-terminal esinamandla akuphazamisi ukusebenza kwebhanki ye-FieldPoint.
Ukufakela i-FP-AI-110, bhekisa kuMfanekiso 1 kwaye ugqibezele la manyathelo alandelayo:
- Slayida iqhosha lesiseko se-terminal ukuya nokuba yiyiphi indawo X (esetyenziselwa nayiphi na imodyuli) okanye indawo 1 (esetyenziselwa iFP-AI-110).
- Ukulungelelanisa iindawo zokubeka i-FP-AI-110 kunye nemigaqo yesikhokelo kwisiseko se-terminal.
- Cinezela ngokuqinileyo ukuze uhlale i-FP-AI-110 kwisiseko se-terminal. Xa i-FP-AI-110 ihleli ngokuqinileyo, i-latch kwi-terminal base iyitshixa endaweni.
- I/O Imodyuli
- Isiseko seTheminali
- Ulungelelwaniso Slot
- Isitshixo
- Latch
- Isikhokelo sikaloliwe
Ukufakela i-cFP-AI-110
I-cFP-AI-110 ikhwela kwi-Compact FieldPoint backplane (cFP-BP-x), enika amandla okusebenza kwimodyuli. Ukufakela i-cFP-AI-110 kwinqwelomoya engasemva ayiphazamisi ukusebenza kwebhanki ye-FieldPoint.
Ukufakela i-cFP-AI-110, bhekisa kuMfanekiso 2 kwaye ugqibezele la manyathelo alandelayo:
- Ukulungelelanisa izikrufu ezithinjiweyo kwi-cFP-AI-110 kunye nemingxuma kwi-backplane. Izitshixo zokulungelelanisa kwi-cFP-AI-110 zithintela ukufakwa ngasemva.
- Cinezela ngokuqinileyo ukuze uhlale i-cFP-AI-110 kwi-backplane.
- Usebenzisa inombolo 2 Phillips screwdriver kunye shank ubuncinane 64 mm (2.5 in.) ubude, qinisa izikrufu captive ukuya 1.1 N ⋅ m (10 lb ⋅ in.) torque. Isigqubuthelo senayiloni kwizikrufu siyabathintela ukuba bangakhululeki.
- cFP-DI-300
- Izikrweqe ezithinjiweyo
- Imodyuli yoMlawuli we-cFP
- Imigodi yokujija
- CFP Backplane
Ukufaka ucingo kwi [c]FP-AI-110
Isiseko se-terminal ye-FP-TB-x sinonxibelelwano lwetshaneli nganye kwezisibhozo zokufakelwa kunye nonikezelo lwamandla lwangaphandle kwizixhobo zamandla ombane. Ibhlokhi yokudibanisa i-cFP-CB-x ibonelela ngodibaniso olufanayo. Ijelo ngalinye lineetheminali zokufaka ezahlukeneyo zevoltage (VIN) kunye yangoku (IIN) igalelo. Umqulutage kunye neengeniso zangoku zibhekiselele kwii-terminals ze-COM, ezidityaniswe ngaphakathi kunye nakwii-C. Zonke ii-terminals ezisibhozo ze-VSUP zixhumeke ngaphakathi komnye nomnye kunye nakwii-terminal V.
Ungasebenzisa i-10–30 VDC unikezelo lwangaphandle kwizixhobo zamandla ombane.
Qhagamshela unikezelo lwamandla lwangaphandle kwiitheminali ezininzi ze-V kunye neVSUP ukuze ubuninzi bangoku ngokusebenzisa nayiphi na i-terminal ye-V yi-2 A okanye ngaphantsi kwaye ubuninzi bangoku ngokusebenzisa nayiphi na i-terminal ye-VSUP yi-1 A okanye ngaphantsi.
Faka i-2 A ephezulu, i-fuse esebenza ngokukhawuleza phakathi konikezelo lwamandla lwangaphandle kunye ne-terminal V kwitshaneli nganye. Imizobo yocingo kolu xwebhu ibonisa iifayisi apho kufanelekileyo.
Itheyibhile yoku-1 idwelisa izabelo zetheminali kwiimpawu ezinxulumene nejelo ngalinye. Izabelo zetheminali ziyafana kwi-FP-TB-x iziseko ze-terminal kunye neebhloko ze-cFP-CB-x zokudibanisa.
Itheyibhile 1. Izabelo zeSimina
|
Umjelo |
Indawo yokukhwelela Amanani | |||
| VIN1 | IIN2 | 3
VSUP |
COM | |
| 0 | 1 | 2 | 17 | 18 |
| 1 | 3 | 4 | 19 | 20 |
| 2 | 5 | 6 | 21 | 22 |
| 3 | 7 | 8 | 23 | 24 |
| 4 | 9 | 10 | 25 | 26 |
| 5 | 11 | 12 | 27 | 28 |
| 6 | 13 | 14 | 29 | 30 |
| 7 | 15 | 16 | 31 | 32 |
| 1 Faka i-2 A, i-fuse esebenza ngokukhawuleza kwi-V nganyeIN Indawo yokukhwelela.
2 Faka i-2 A, i-fuse esebenza ngokukhawuleza kwi-I nganyeIN Indawo yokukhwelela. 3 Faka i-2 A ephezulu, i-fuse esebenza ngokukhawuleza kwi-V nganyeSUP Indawo yokukhwelela. |
||||
- Isilumkiso Musa ukudibanisa zombini yangoku kunye ne-voltagigalelo kwitshaneli enye.
- Isilumkiso Amandla e-Cascading phakathi kweemodyuli ezimbini zoyisa ukwahlukana phakathi kwezo modyuli. Amandla eCascading ukusuka kwimodyuli yenethiwekhi yoyisa konke ukwahlula phakathi kweemodyuli kwibhanki yeFieldPoint.
Ukuthatha iMilinganiselo nge [c]FP-AI-110
I- [c] FP-AI-110 inamajelo asibhozo anesiphelo esisodwa. Onke amajelo asibhozo abelana ngereferensi eqhelekileyo ebekwe yodwa kwezinye iimodyuli kwinkqubo yeFieldPoint. Umzobo 3 ubonisa i-analog input circuitry kwitshaneli enye.
Ukulinganisa uMqulutage kunye ne [c]FP-AI-110
Uluhlu lwegalelo lomthamotagIimpawu ze-e yi-0–1 V, 0–5 V, 0–10 V, 60 mV, ±300 mV, ±1V, ±5 V, kunye ne-±10 V.
Umzobo 4 ubonisa indlela yokudibanisa umqulutage umthombo ngaphandle konikezelo lwamandla lwangaphandle kumjelo omnye we [c]FP-AI-110.
Umzobo 5 ubonisa indlela yokudibanisa umqulutage umthombo kunye nonikezelo lwamandla lwangaphandle kumjelo omnye we [c]FP-AI-110.
Ukulinganisa okwangoku nge [c]FP-AI-110
- Uluhlu lwegalelo kwimithombo yangoku yi-0-20, 4-20, kunye ne-±20 mA.
- Imodyuli ifundeka ngokuqukuqelayo kwitheminali ye-IIN njengento elungileyo kwaye equkuqelayo iphuma kwitheminali njengenegative. Iyaqukuqela yangoku kwitheminali ye-IIN, idlula kwi-100 Ω isixhasi, kwaye iphuma kwi-terminal ye-COM okanye i-C.
- Umzobo we-6 ubonisa indlela yokudibanisa umthombo wangoku ngaphandle kokunikezelwa kwamandla angaphandle kumjelo omnye we- [c] FP-AI-110.
Umzobo we-7 ubonisa indlela yokudibanisa umthombo wangoku kunye nokunikezelwa kwamandla angaphandle kumjelo omnye we- [c] FP-AI-110.
Uluhlu lweeNgeniso
Ukuthintela ufundo olungachanekanga, khetha uluhlu lwegalelo ukuze isiginali oyilinganisayo ingagqithi nakweyiphi na isiphelo soluhlu.
Ukugqithisa
I [c]FP-AI-110 inophawu olujingayo olulinganisa kancinane ngaphaya kwamaxabiso aqhelekileyo kuluhlu ngalunye. Umzekeloample, owona mda wokulinganisa wokwenene woluhlu lwe-± 10 V yi-± 10.4 V. Uphawu olugqithisiweyo lwenza ukuba i- [c] FP-AI-110 ihlawule izixhobo zentsimi ezineempazamo ze-span ukuya kwi-+4% yesikali esipheleleyo. Kwakhona, ngophawu olujingayo, isiginali enengxolo kufutshane nesikali esipheleleyo ayidali iimpazamo zokulungisa.
Iisetingi zesihluzi
Izicwangciso zokucoca ezintathu ziyafumaneka kwitshaneli nganye. Izihluzo ezikwi [c]FP-AI-110 itshaneli zongeniso zizihluzo zekama ezinikezela iinotshi zokulahlwa kuphindaphindo, okanye iharmonics, yesiqhelo esisisiseko. Unokukhetha i-frequency ye-50, 60, okanye i-500 Hz. I- [c] FP-AI-110 isebenzisa i-95 dB yokukhatywa kwi-frequency engundoqo kunye ubuncinane ne-60 dB yokugatywa kwi-harmonics nganye. Kwiimeko ezininzi, uninzi lwamacandelo engxolo eesiginali zongeniso zinxulumene ne-AC yasekhaya frequency, ngoko ke useto lokucoca nokuba yi-50 okanye i-60 Hz lungcono.
Isicwangciso sokucoca simisela umyinge apho i [c]FP-AI-110 sampamagalelo amancinci. I [c]FP-AI-110 resampinciphisa onke amajelo ngesantya esifanayo. Ukuba umisela onke amajelo kwi-50 okanye 60 Hz lokucoca, i [c]FP-AI-110 s.ampithontsi itshaneli nganye rhoqo ngo-1.470 okanye rhoqo ngo-1.230 s, ngokulandelelanayo. Ukuba umisela onke amajelo kwii-500 Hz izihluzi, imodyuli sampUkunciphisa itshaneli nganye rhoqo ngo-0.173 s. Xa ukhetha useto lokucoca ulwelo olwahlukileyo lwamajelo ahlukeneyo, sebenzisa le fomula ilandelayo ukumisela i-sampulwimi.
- (inani letshaneli ezine-50 Hz filter) × 184 ms +
- (inani letshaneli ezine-60 Hz filter) × 154 ms +
- (inani lamatshaneli ane-500 Hz filter) × 21.6 ms = Ireyithi yoHlaziyo
Ukuba awusebenzisi ezinye ze [c]FP-AI-110 amajelo, zibeke kwi-500 Hz isicwangciso sokucoca ukuphucula ixesha lokuphendula kwimodyuli. Umzekeloample, ukuba ijelo elinye limiselwe i-60 Hz lokucoca, kwaye amanye amajelo asixhenxe amiselwe ku-500 Hz, imodyuli s.ampnciphisa itshaneli nganye rhoqo nge-0.3 s (amaxesha amane ngokukhawuleza kunemeko apho zonke iitshaneli ezisibhozo zisetelwe kwi-60 Hz setting).
I sampizinga le-ling alichaphazeli izinga apho umnqongo womsebenzi wothungelwano ufunda idata. I [c]FP-AI-110 isoloko inedatha ekhoyo kwimodyuli yenethiwekhi ukuba ifundwe; i-sampling izinga lizinga apho le datha ihlaziywa. Misela isicelo sakho ukuze i-sampizinga leling likhawuleza kunomlinganiselo apho imodyuli yothungelwano ivotela i [c]FP-AI-110 yedata.
Iimpawu zesimo
I- [c] FP-AI-110 inee-LED ezimbini zobume obuluhlaza, AMANDLA kunye ne- READY. Emva kokuba ufake i [c]FP-AI-110 kwisiseko sesiphelo okanye kwinqwelomoya kwaye usebenzise amandla kwimodyuli yothungelwano eqhagamshelweyo, izibane ze-LED eziluhlaza kunye ne [c]FP-AI-110 zazisa imodyuli yenethiwekhi ngobukho bayo. Xa imodyuli yenethiwekhi ibona i [c]FP-AI-110, ithumela ulwazi lokuqala loqwalaselo kwi [c]FP-AI-110. Emva kokuba i- [c] FP-AI-110 ifumana olu lwazi lokuqala, izibane eziluhlaza READY LED kunye nemodyuli ikwimo yokusebenza eqhelekileyo. Ukuqhwanyaza okanye ukungakhanyi KULUNGILE I-LED ibonisa imeko yempazamo.
Ukuphucula iFirmware yeFieldPoint
Kusenokufuneka uphucule iFieldPoint firmware xa usongeza iimodyuli ezintsha ze-I/O kwinkqubo yeFieldPoint. Ngolwazi malunga nokumisela ukuba yeyiphi i-firmware oyifunayo kunye nendlela yokuphucula i-firmware yakho, yiya ku ni.com/info kwaye ngenisa ifpmatrix.
IziKhokelo zokuzahlula kunye noKhuseleko
Isilumkiso Funda olu lwazi lulandelayo phambi kokuzama ukuqhagamshela i [c]FP-AI-110 nakweyiphi na imijikelezo enokuthi iqulathe ivolthi eyingozi.tages.1
Eli candelo lichaza ukwahlulwa kwe [c]FP-AI-110 kunye nokuthotyelwa kwayo nemigangatho yokhuseleko yamazwe ngamazwe. Udibaniso lwee-wiring zentsimi zodwa kwi-backplane kunye ne-inter-module yebhasi yonxibelelwano. Izithintelo zokuzihlukanisa kwimodyuli zibonelela nge-250 Vrms Measurement Category II eqhubekayo ye-channel-to-backplane kunye ne-channel-to-ground isolation, iqinisekiswe yi-2,300 Vrms, i-5 s dielectric teststanding test.2 I- [c] FP-AI-110 inikezela nge-insulation kabini (ihambelana ne-IEC 61010-1) ngenxa
- Ivolthi eyingozitage yivoltage enkulu kune 42.4 Vpeak okanye 60 VDC. Xa voltage ikhona nakweliphi na itshaneli, onke amajelo kufuneka athathwe njenganomthamo onobungozitages. Qinisekisa ukuba zonke iisekethe eziqhagamshelwe kwimodyuli azifikeleleki kuchuku lomntu.
- Jonga kuKhuseleko lokwahlulwa Voltage icandelo lolwazi oluthe vetshe malunga nokuba wedwa kwi [c]FP-AI-110.
Ukusebenza ivoltages of 250 Vrms
Imigangatho yokhuseleko (efana naleyo ipapashwe yi-UL kunye ne-IEC) ifuna ukusetyenziswa kwe-insulation kabini phakathi kwevolthi enobungozi.tages kunye nawo nawaphi na amalungu okanye iisekethe ezinokufikelelwa ngumntu.
Ungaze uzame ukusebenzisa nayiphi na imveliso yokwahlula phakathi kweendawo ezifikelelwa ngabantu (ezifana neereyile zeDIN okanye izitishi zokubeka iliso) kunye neesekethe ezinokuba nobungozi phantsi kweemeko eziqhelekileyo, ngaphandle kokuba imveliso iyilelwe ngokukodwa eso sicelo, njengoko injalo [c] FP-AI-110.
Nangona i- [c]FP-AI-110 iyilelwe ukusingatha izicelo ezinokuba yingozi, landela ezi zikhokelo ukuqinisekisa inkqubo epheleleyo ekhuselekileyo:
- Akukho kwahlulwa phakathi kwamajelo kwi- [c]FP-AI-110. Ukuba yingozi voltagI-e ikhona nakweliphi na itshaneli, onke amajelo athathwa njengeyingozi. Qinisekisa ukuba zonke ezinye izixhobo kunye neesekethe eziqhagamshelwe kwimodyuli zikhuselwe ngokufanelekileyo kunxibelelwano lwabantu.
- Musa ukwabelana nonikezelo lwangaphandle voltages (iitheminali ze-V kunye no-C) nezinye izixhobo (kubandakanywa nezinye izixhobo ze-FieldPoint), ngaphandle kokuba ezo zixhobo zibekwe zodwa kuqhagamshelwano lwabantu.
- Kwi-Compact FieldPoint, kufuneka uqhagamshele i-terminal yomhlaba ekhuselayo (PE) kwi-cFP-BP-x backplane kumhlaba wokhuseleko wenkqubo. I-backplane PE i-terminal yomhlaba inesimboli ilandelayo stamped ecaleni kwayo:. Qhagamshela i-backplane ye-PE yomhlaba i-terminal kumhlaba wokhuseleko wenkqubo usebenzisa i-14 AWG (1.6 mm) ucingo kunye ne-ring lug. Sebenzisa i-5/16 in. isikrufu se-panhead esithunyelwe nge-backplane ukukhusela i-ring lug kwi-backplane PE ye-terminal yomhlaba.
- Njengayo nayiphi na ivolthi eyingozitage-wiring, qinisekisa ukuba zonke iintambo kunye noqhagamshelo ziyahlangabezana neekhowudi zombane ezifanelekileyo kunye nezenzo zobulumko. Nqama iziseko zetheminali kunye neenqwelomoya kwindawo, indawo, okanye ikhabhathi ethintela ngengozi okanye ukufikelela okungagunyaziswanga kwiintambo ezithwala ivolthi eyingozi.tages.
- Sukusebenzisa i [c]FP-AI-110 njengokuphela komqobo owahlulayo phakathi koqhagamshelwano lwabantu kunye nokusebenza vol.tagIngaphezulu kwe-250 Vrms.
- Sebenzisa i [c]FP-AI-110 kuphela okanye ngaphantsi kweDegree yoNgcoliseko 2. iDegree yoNgcoliseko 2 ithetha ukuba kuphela ungcoliseko olungenakuziphatha lwenzeka kwiimeko ezininzi. Ngamanye amaxesha, nangona kunjalo, i-conductivity yesikhashana ebangelwa yi-condensation kufuneka ilindeleke
- Sebenzisa i- [c]FP-AI-110 kuDidi loMlinganiselo okanye ngaphantsi kweCandelo II. ICandelo loMlinganiso lwe-II lenzelwe imilinganiselo eyenziwa kwiisekethe eziqhagamshelwe ngokuthe ngqo kwi-low-voltage ufakelo. Olu didi lubhekiselele kunikezelo lwenqanaba lendawo, njengaleyo ibonelelwe ngomgangatho wokuphuma eludongeni
Izikhokelo zoKhuseleko kwiiNdawo ezinobungozi
I- [c] FP-AI-110 ifanelekile ukusetyenziswa kwiKlasi I, iCandelo 2, amaQela A, B, C, kunye noD kwiindawo ezinobungozi; Udidi 1, uMmandla 2, i-AEx nC IIC T4 kunye ne-Ex nC IIC T4 iindawo ezinobungozi; kunye neendawo ezingenabungozi kuphela. Landela ezi zikhokelo ukuba ufaka i- [c]FP-AI-110 kwindawo enokubanoqhushumbo. Ukungaphumeleli ukulandela ezi zikhokelo kunokubangela ukwenzakala kakhulu okanye ukufa.
- Isilumkiso Musa ukuqhawula iingcingo ze-I/O-zecala okanye izihlanganisi ngaphandle kokuba umbane ucinyiwe okanye ummandla waziwa ngokuba awunabungozi.
- Isilumkiso Ungazisusi iimodyuli ngaphandle kokuba umbane ucinyiwe okanye indawo yaziwa njengengenabungozi.
- Isilumkiso Ukutshintshwa kwamacandelo kunokuphazamisa ukufaneleka kweKlasi I, iCandelo 2.
- Isilumkiso Kusetyenziso lweZone 2, faka inkqubo yeCompact FieldPoint kwindawo ebiyelweyo ebekwe kwi-IP 54 ubuncinane njengoko ichazwa yi-IEC 60529 kunye ne-EN 60529.
Iimeko ezikhethekileyo zokusetyenziswa ngokukhuselekileyo eYurophu
Esi sixhobo sivavanyiwe njengesixhobo se-EEx nC IIC T4 phantsi kwe-DEMKO Certificate No. 03 ATEX 0251502X. Imodyuli nganye imakishwe i-II 3G kwaye ifanelekile ukusetyenziswa kwiZone 2 kwiindawo ezinobungozi.
Isilumkiso Kwizicelo zeZone 2, imiqondiso eqhagamshelweyo kufuneka ibe phakathi kwemida ilandelayo
- Ukubanakho……………………….. 20 μF ubuninzi
- I-inductance………………………….0.2 H max
Izikhokelo zoKhuseleko kwiVoltages
Ukuba yingozi voltagezi ziqhagamshelwe kwimodyuli, thatha la manyathelo okhuseleko alandelayo. Ivolthi eyingozitage yivoltage enkulu kune 42.4 Vpeak okanye 60 VDC emhlabeni emhlabeni
- Isilumkiso Qinisekisa ukuba yingozi voltagI-e wiring yenziwa kuphela ngabasebenzi abaqeqeshiweyo abathobela imigangatho yombane yendawo.
- Isilumkiso Musa ukuxuba umthamo onobungozitagiisekethe ze-e kunye neesekethe ezinokufikelelwa ngumntu kwimodyuli enye.
- Isilumkiso Qinisekisa ukuba izixhobo kunye neesekethe eziqhagamshelwe kwimodyuli zikhuselwe ngokufanelekileyo kunxibelelwano lwabantu.
- Isilumkiso Xa iitheminali kwibhloko yesidibanisi zihlala zinevolthi eyingozitages, qinisekisa ukuba iitheminali azifikeleleki.
Iinkcukacha
Ezi nkcukacha zilandelayo ziqhelekileyo kuluhlu -40 ukuya kuma-70 °C ngaphandle kokuba kuphawulwe ngenye indlela. Iimpazamo zenzuzo zinikwa ngokwepesentitagi-e yexabiso lophawu longeniso. Iinkcukacha zinokutshintshwa ngaphandle kwesaziso.
Iimpawu zoFakelo
- Inani lamajelo .……………………….8
- Isisombululo se-ADC……………………………… iibhithi ezili-16 ku-50 okanye 60 Hz; I-10 bits kwi-500 Hz
- Uhlobo lwe-ADC.…………………………………Delta-sigma
Isisombululo esisebenzayo ngoluhlu lwesignali yegalelo kunye neseti yokucoca
|
Ngobizo Uluhlu lwegalelo |
Nge Ukugqithisa |
Iyasebenza Isigqibo nge 50 okanye
Isihluzi se-60 Hz siyasebenza* |
Iyasebenza Isigqibo nge 500 Hz okanye Akukho sihluzo siVunyiweyo* | |
| Umqulutage | ±60 mV
±300 mV ±1 V ±5 V ±10 V 0–1 V 0-5 V 0-10 V |
±65 mV
±325 mV ±1.04 V ±5.2 V ±10.4 V 0–1.04 V 0-5.2 V 0-10.4 V |
I-3 mV
I-16 mV I-40 mV I-190 mV I-380 mV I-20 mV I-95 mV I-190 mV |
I-25 mV
I-100 mV I-300 mV I-1,500 mV I-3,000 mV I-300 mV I-1,500 mV I-3,000 mV |
| Okwangoku | 0–20 mA
4–20 mA ± 20 mA |
0–21 mA
3.5–21 mA ± 21 mA |
0.5 mA
0.5 mA 0.7 mA |
15 mA
15 mA 16 mA |
| * Ibandakanya iimpazamo zobungakanani kunye nengxolo ye-rms. | ||||
Iimpawu zegalelo ngolungiselelo lokucoca
|
Uphawu |
Iisetingi zesihluzi | ||
| 50 Hz | 60 Hz | 500 Hz | |
| Ireyithi yokuhlaziya* | 1.470 s | 1.230 s | 0.173 s |
| Isisombululo esisebenzayo | 16 amasuntswana | 16 amasuntswana | 10 amasuntswana |
| I-bandwidth yegalelo (–3 dB) | 13 Hz | 16 Hz | 130 Hz |
| * Isebenza xa zonke iitshaneli zisetelwe kwisihluzo esifanayo. | |||
- Ukwaliwa kwendlela eqhelekileyo…………………… 95 dB (ene-50/60 Hz isihluzo)
- Ukungahambelani nomgca ………………………………...
Umqulutage Amagalelo
- I-impedance yokufaka…………………………..>100 MΩ
- Ukugqithisatage ukhuseleko …………………±40 V
Uphawu lwe-ADC apho i-digital code output ikhula rhoqo njengoko ixabiso le-analog input liyanda.
Ungeniso lwangoku
- 25 °C.………………………………………… 400 pA typ, 1 nA max
- 70 °C……………………………………….3 nA typ, 15 nA max
Ingxolo yokufaka (ene50 okanye 60 Hz isihluzo esivuliweyo)
- ± 60 mV uluhlu.……………………….±3 LSB1 incopho-kuya-kwincopho
- ± 300 mV uluhlu………………………±2 LSB incopho-kuya-kwincopho
- Olunye uluhlu ………………………….±1 LSB incopho-kuya-kwincopho
Ukuchaneka okuqhelekileyo kunye nokuqinisekiswa ngoluhlu lwegalelo kunye noluhlu lobushushu
|
Ngobizo Uluhlu lwegalelo |
Isiqhelo Ukuchaneka nge15 ukuya ku35 °C (ipesenti yokuFunda;
I-% yesikali esipheleleyo) |
Iqinisekisiwe Ukuchaneka nge15 ukuya ku35 °C
(Ipesenti yokuFunda; I-% yesikali esipheleleyo) |
| ±60 mV | ±0.04%; ±0.05% | ±0.05%; ±0.3% |
| ±300 mV | ±0.04%; ±0.015% | ±0.06%; ±0.1% |
| ±1 V | ±0.04%; ±0.008% | ±0.05%; ±0.04% |
| ±5 V | ±0.04%; ±0.005% | ±0.06%; ±0.02% |
| ±10 V | ±0.04%; ±0.005% | ±0.06%; ±0.02% |
| 0-1 V | ±0.04%; ±0.005% | ±0.05%; ±0.03% |
| 0-5 V | ±0.04%; ±0.003% | ±0.06%; ±0.01% |
| 0-10 V | ±0.04%; ±0.003% | ±0.06%; ±0.01% |
|
Ngobizo Uluhlu lwegalelo |
Isiqhelo Ukuchaneka kwi-40 ukuya kuma-70 °C (ipesenti yokuFunda;
I-% yesikali esipheleleyo) |
Iqinisekisiwe Ukuchaneka kwi-40 ukuya kuma-70 °C (ipesenti yokuFunda;
I-% yesikali esipheleleyo) |
| ±60 mV | ±0.06%; ±0.35% | ±0.10%; ±1.5% |
| ±300 mV | ±0.07%; ±0.08% | ±0.11%; ±0.40% |
| ±1 V | ±0.06%; ±0.03% | ±0.10%; ±0.13% |
| ±5 V | ±0.07%; ±0.01% | ±0.11%; ±0.04% |
| ±10 V | ±0.07%; ±0.01% | ±0.11%; ±0.03% |
|
Ngobizo Uluhlu lwegalelo |
Isiqhelo Ukuchaneka kwi-40 ukuya kuma-70 °C (ipesenti yokuFunda;
I-% yesikali esipheleleyo) |
Iqinisekisiwe Ukuchaneka kwi-40 ukuya kuma-70 °C (ipesenti yokuFunda;
I-% yesikali esipheleleyo) |
| 0-1 V | ±0.06%; ±0.025% | ±0.10%; ±0.12% |
| 0-5 V | ±0.07%; ±0.007% | ±0.11%; ±0.03% |
| 0-10 V | ±0.07%; ±0.005% | ±0.11%; ±0.02% |
Phawula Isikali esipheleleyo lixabiso eliphezulu loluhlu lwegalelo legama. Umzekeloample, kuluhlu lwegalelo le-±10 V, isikali esipheleleyo yi-10 V kunye ne-±0.01% yesikali esipheleleyo yi-1 mV.
- Fumana impazamo yokuqhuba …………………………….±20 ppm/°C
- Impazamo ye-Offset drift Nge-50 okanye i-60 Hz isihluzo senziwe sasebenza.…………………………±6 μV/°C
- Nge500Hz isihluzi esivuliweyo ………±15 μV/°C
Amagalelo angoku
- I-impedance yokufaka……………………………..60–150 Ω
- Ukugqithisatage ukhuseleko …………………±25 V
- Ingxolo yokufaka (50 okanye 60 Hz isihluzo) ………0.3 μA rms
Ukuchaneka okuqhelekileyo kunye nokuqinisekiswa ngokoluhlu lobushushu
| Isiqhelo Ukuchaneka nge15 ukuya ku35 °C
(% of Reading; % of Full Scale) |
Iqinisekisiwe Ukuchaneka nge15 ukuya ku35 °C
(% of Reading; % of Full Scale) |
| ±0.08%; ±0.010% | ±0.11%; ±0.012% |
| Isiqhelo Ukuchaneka kwi-40 ukuya kuma-70 °C
(% of Reading; % of Full Scale) |
Iqinisekisiwe Ukuchaneka kwi-40 ukuya kuma-70 °C
(% of Reading; % of Full Scale) |
| ±0.16%; ±0.016% | ±0.3%; ±0.048% |
- Impazamo yokujongana nempazamo.………………………….±100 nA/°C
- Fumana impazamo yokuqhubat …………………………….±40 ppm/°C
Iimpawu zoMzimba
Iimpawu ……………………………………… AMANDLA aluhlaza kunye nezalathi ZILUNGILEYO
Ubunzima
- FP-AI-110………………………………..140 g (4.8 oz)
- cFP-AI-110………………………………… 110 g (3.7 oz)
Iimfuno zamandla
- Amandla avela kwimodyuli yenethiwekhi …………350 mW
Ukwahlulwa koKhuseleko Voltage
Ukwahlulwa komjelo ukuya emhlabeni
Ngokuqhubekayo ………………………………………………………………………………………………………………………………………
Dielectric ukumelana………………..2,300 Vrms (ubude bovavanyo yimizuzu emi-5)
Ukwahlulwa komjelo ukuya kumjelo .………..Akukho mahluko phakathi
imijelo
Okusingqongileyo
Iimodyuli zeFieldPoint zenzelwe ukusetyenziswa ngaphakathi endlini kuphela. Ukusetyenziswa ngaphandle, kufuneka zifakwe ngaphakathi kwendawo evaliweyo.
- Ubushushu bokusebenza ………………….–40 ukuya kuma-70 °C
- Ubushushu bokugcina ………………………..–55 ukuya kuma-85 °C
- Ukufuma .………………………………………… 10 ukuya ku-90% RH, ukunyuswa
- Ukuphakama okuphezulu…………………………..2,000 m; kwiindawo eziphakamileyo zokuzihlukanisa voltagIireyithingi kufuneka zehliswe.
- Isidanga songcoliseko …………………………….2
Ukothuka kunye nokungcangcazela
Ezi nkcukacha zisebenza kuphela kwi-cFP-AI-110. I-NI icebisa iCompact FieldPoint ukuba isicelo sakho siphantsi komothuko kunye nokungcangcazela. Ukungcangcazela okusebenzayo, ngokungakhethiyo
- (IEC 60068-2-64)………………………………10–500 Hz, 5 grms Ukungcangcazela okusebenzayo, sinusoidal
- (IEC 60068-2-6)…………………………..10–500 Hz, 5 g
Umothuko osebenzayo
- (IEC 60068-2-27)………………………………… 50 g, 3 ms half sine, 18 izothuso kuqhelaniso olu-6; 30 g, 11 ms isiqingatha sine, 18 izothuso kwi-6 yokuqhelaniswa
Ukhuseleko
Le mveliso yenzelwe ukuhlangabezana neemfuno zale migangatho ilandelayo yokhuseleko kwisixhobo sombane sokulinganisa, ukulawula, kunye nokusetyenziswa kwebhubhoratri:
- IEC 61010-1, EN 61010-1
- I-UL 61010-1
- CAN/CSA-C22.2 No. 61010-1
Kwi-UL, indawo enobungozi, kunye nezinye iziqinisekiso zokhuseleko, bhekisa kwileyibhile yemveliso okanye undwendwele ni.com/certification, khangela ngenombolo yemodeli okanye umgca wemveliso, kwaye nqakraza ikhonkco elifanelekileyo kwikholamu yeSatifikethi.
Ukuhambelana koMbane
Izinto ezikhutshwayo………………………………………… EN 55011 Iklasi A kwi-10 m FCC iCandelo 15A ngaphezu kwe-1 GHz
Ukungakhuseleki……………………………………….EN 61326:1997 + A2:2001,
I-CE, i-C-Tick, kunye neFCC Icandelo le-15 (iKlasi A) ehambelanayo
Phawula Ukuthobela i-EMC, kufuneka usebenzise esi sixhobo ngekhebhula ekhuselekileyo
CE Ukuthotyelwa
- Le mveliso ihlangabezana neemfuno ezibalulekileyo ezisebenzayo
- I-European Directives, njengoko ihlonyelwe ukumakishwa kweCE, ngolu hlobo lulandelayo:
- Umgangatho ophantsitage Directive (ukhuseleko)………73/23/EEC
Ukuhambelana koMbane
- Umyalelo (EMC) …………………………….89/336/EEC
Phawula Jonga kwi-Declaration of Conformity (DoC) yale mveliso ngalo naluphi na ulwazi olongezelelweyo lothotyelo lolawulo. Ukufumana i-DoC yale mveliso, ndwendwela ni.com/certification, khangela ngenombolo yemodeli okanye umgca wemveliso, kwaye nqakraza ikhonkco elifanelekileyo kwikholamu yeSiqinisekiso.
Imilinganiselo yoomatshini
Umzobo we-8 ubonisa imilinganiselo yomatshini ye-FP-AI-110 efakwe kwisiseko se-terminal. Ukuba usebenzisa i-cFP-AI-110, bhekisa kwincwadi yomsebenzisi yomlawuli weCompact FieldPoint yemilinganiselo kunye neemfuno zokucocwa kweekhebhula zenkqubo yeCompact FieldPoint.
Apho ungaya khona ngeNkxaso
Ngolwazi oluthe kratya malunga nokumisela inkqubo ye-FieldPoint, bhekisa kula maxwebhu eSizwe:
- Incwadi yomsebenzisi yemodyuli yenethiwekhi yeFieldPoint
- Eminye imiyalelo yokusebenza kwemodyuli ye-FieldPoint I/O
- Isiseko se-terminal ye-FieldPoint kunye nemiyalelo yokusebenza yebhloko yesinxibelelanisi
Yiya e ni.com/supportt kwezona manyuwali zangoku, umzamples, kunye nolwazi lokusombulula ingxaki
Ikomkhulu lequmrhu leSizwe leZixhobo liku-11500 North Mopac Expressway, Austin, Texas, 78759-3504. Izixhobo zeSizwe nazo zineeofisi ezibekwe kwihlabathi jikelele ukunceda ukujongana neemfuno zakho zenkxaso. Ukufumana inkxaso yomnxeba eUnited States, yenza isicelo sakho senkonzo ku-ni.com/support uze ulandele imiyalelo yokufowuna okanye ucofe ku-512 795 8248. Ukuze ufumane inkxaso yomnxeba ngaphandle kweUnited States, qhagamshelana neofisi yesebe yasekuhlaleni:
- Ostreliya 1800 300 800, Ostriya 43 0 662 45 79 90 0,
- EBelgium 32 0 2 757 00 20, Brazil 55 11 3262 3599,
- Khanada 800 433 3488, China 86 21 6555 7838,
- IRiphabliki yaseCzech 420 224 235 774, eDenmark 45 45 76 26 00,
- EFinland 385 0 9 725 725 11, France 33 0 1 48 14 24 24,
- EJamani 49 0 89 741 31 30, Indiya 91 80 51190000,
- USirayeli 972 0 3 6393737, Italy 39 02 413091,
- eJapan 81 3 5472 2970, Korea 82 02 3451 3400,
- ILebhanon 961 0 1 33 28 28, Malaysia 1800 887710,
- Mexico 01 800 010 0793, Netherlands 31 0 348 433 466,
- ENew Zealand 0800 553 322, eNorway 47 0 66 90 76 60,
- Poland 48 22 3390150, Portugal 351 210 311 210,
- IRashiya 7 095 783 68 51, eSingapore 1800 226 5886,
- Slovenia 386 3 425 4200, eMzantsi Afrika 27 0 11 805 8197,
- ESpeyin 34 91 640 0085, Sweden 46 0 8 587 895 00,
- eSwitzerland 41 56 200 51 51, Taiwan 886 02 2377 2222,
- Thailand 662 278 6777, United Kingdom 44 0 1635 523545
Izixhobo zeSizwe, NI, ni.com, kunye neLabVIEW ziimpawu zorhwebo zeNational Instruments Corporation. Jonga kwi
Icandelo leMimiselo yokuSebenzisa kwi-ni.com/legal ngolwazi oluthe kratya malunga neempawu zentengiso zeSizwe. Enye imveliso kunye namagama enkampani akhankanywe apha ziimpawu zorhwebo okanye amagama orhwebo eenkampani zabo.
Kwilungelo elilodwa lomenzi wechiza ezigquma imveliso yeSizwe yezixhobo, bhekisa kwindawo efanelekileyo: Uncedo»Patents kwisoftware yakho, patents.txt file kwiCD yakho, okanye ni.com/patents.
IINKONZO EZIBALULEKILEYO
Sinikezela ngeenkonzo ezikhuphisanayo zokulungisa kunye nokulinganisa, kunye namaxwebhu afikelelekayo ngokulula kunye nezixhobo ezikhutshelwa simahla.
THENGISA INDLELA YAKHO
- Sithenga amatsha, asele esetyenzisiwe, angagunyaziswanga, kunye neenxalenye zentsalela kulo lonke uthotho lwe-NI
- Sisebenzela esona sisombululo silungele iimfuno zakho.
- Thengisa Ngemali
- Fumana iTyala
- Fumana iNtengiso yoRhwebo
I-NI HARDWARE EPHELELEYO EKUMTHETHO & ULUNGELE UKUTHUTYWA
Sinempahla eNtsha, eNtsha yeNtsalela, eHlaziyiweyo, kunye neReconditioned NI Hardware.
Cela iQuote ( https://www.apexwaves.com/modular-systems/national-instruments/fieldpoint/FP-AI-110?aw_referrer=pdf ) ~ COFA APHA FP-Al-110
Ukuvala umsantsa phakathi komvelisi kunye nenkqubo yovavanyo lwelifa lakho.
Zonke iimpawu zorhwebo, iibrendi, kunye namagama eemveliso ziyipropathi yabanini bazo.
Amaxwebhu / Izibonelelo
 |
IZIXHOBO ZIKAZWELONKE I-FP-AI-110 Isibhozo-Isibhobho se-16-Bit yokufaka iimodyuli ze-Analog [pdf] Incwadi Yomyalelo FP-AI-110, cFP-AI-110, Eight-Channel 16-Bit Input Modules, FP-AI-110 Eight-Channel 16-Bit Input Modules, 16-Bit Input Modules, Analog Input Modules, Input Modules , Iimodyuli |
