FPE-LML-CP3-NP LML Duramax CP3 Conversion Kit
“
Tlhahisoleseding ya Sehlahiswa
Litlhaloso:
- Ho lekana: 2011-2016 GMC Sierra le Chevrolet Silverado 2500/3500
e na le 6.6L LML Duramax - Kit P/N: FPE-LML-CP3-NP, FPE-LML-CP3-WP, FPE-LML-CP3-10
Litaba tsa Sehlahisoa:
| Ntho | Tlhaloso | Bongata |
|---|---|---|
| 1 | CP3 ho adaptara ea enjine | 1 |
Linomoro tsa Karolo ea GM:
- GM Pressure Regulator: 12611872
- GM Injector Return Lines le Regulator: 12639000
Fuel Subsystems:
Setsi sa Taolo ea Mafura (FCA): E laola mafura
ho tloha ho CP3 ho ea ho seporo sa mafura se nang le khatello e phahameng. Wiring e fosahetseng e ka baka
ha ho boemo ba ho qala.
Taolo ea Khatello ea Mafura 2: E laola khatello ea maikutlo
seporo sa mafura se nang le khatello e phahameng. Ho hloleha ho ka thibela koloi
ts'ebetso.
Litsela tsa Line le Hose:
Mohala oa Phepelo ea Mafura a Tlase: Ntho ea 5 ka kit
Hose ea Phepelo ea Mafura: Ntho ea 2 ka kit
Litaelo tsa Tšebeliso ea Sehlahisoa
Tlhophiso ea Sisteme ea Mafura:
- Etsa bonnete ba hore likarolo tsohle li kenyelelitsoe ka har'a kit.
- Sheba linomoro tsa karolo ea GM bakeng sa tlatsetso
dikarolo.
Mehato ea ho Kenya:
- Latela litaelo tse fanoeng ho kenya phetoho ea CP3
kit.
Tataiso ea ho rarolla mathata:
Letšoao: Ho Hola ka Tlas'a Potlako
- Etsa qeto ea hore na koloi e na le lifti ea 'maraka o latelang
pompa. - Lekanya khatello ea phepelo ea mafura ho tloha pompong ea phahamiso ho CP3 le
fetola ha ho hlokahala.
Lipotso Tse Botsoang Khafetsa (FAQ):
P: Ke lokela ho etsa eng haeba ke kopana le crank no-start
letšoao?
A: Sheba likhokahano tsa lithapo bakeng sa actuator ea taolo ea mafura
le ho etsa bonnete ba hore ho na le likhoele tse nepahetseng.
"`
SEHLOOHO: LML Duramax CP3 Conversion Kit
FPE-2024-124 Motšeanong, 2024 Leqephe la 1 ho tse 9
TLHOKOMELISO: KIT P/N:
2011-2016 GMC Sierra le Chevrolet Silverado 2500/3500 e nang le 6.6L LML Duramax FPE-LML-CP3-NP, FPE-LML-CP3-WP, FPE-LML-CP3-10
Tafole ea likateng
DITENG TSA KIT: …………………………………………………………………………………………………………………………………………………… 2 LITSELA TSA LINE LE HOSE BAKENG SA CONVERSION KITS CP3 …………………………………………………………………………………………………………………………………………………………………………………… 3 LITABA TSA HO THATA MATHATA
LETŠOAO: HO HLOLA KA TLAS'A POTLAKO ………………………………………………………………………………………………………………………………………………………………………………………………………………………………………. 7
LITEMOSO / LINTLHA TSA BOHLOKOA: · KITI ENA E KA KAKARETSA KAMOO TSA HLAHISITSENG HO TSOA LIKHETHONG TSE FETILENG tseo U li entseng. LATELA LITAELO TSOHLE TSE HLALETSENG TOKOMANENG FPE-2021-56. HAEBA U NA LE LIPOTSO HO INSTALLATION, RE IMEMERE HO INFO@FLEECEPERFORMANCE.COM KAPA U RE LETSE HO 317-286-3573. • Hloekisa ka ho feletseng melapo eohle ea mafura le likaroloana pele o kenngoa ka tharollo ea solvent. · Moreki le mosebelisi oa ho qetela ba lokolla, ba kolota, ba lokolla, 'me ba boloka Fleece Performance Engineering, Inc. e se nang kotsi ho tsoa litletlebong life kapa life, lits'enyehelo, lisosa tsa ketso, likotsi, kapa litjeho tse bakiloeng ke kapa tse amanang le ts'ebeliso kapa kemiso ea sehlahisoa sena se tlolang melaoana le lipehelo tse leqepheng lena, boitatolo ba sehlahisoa, le/kapa litaelo tsa ho kenya sehlahisoa. Fleece Performance Engineering, Inc. e ke ke ea jara boikarabello bakeng sa tšenyo efe kapa efe e tobileng, e sa tobang, ea litlamorao, ea mohlala, ea kotlo, ea molao, kapa ea tšohanyetso kapa likotlo tse bakiloeng ke tšebeliso kapa ho kenya sehlahisoa sena.
Leqephe la 2 la 9
DIKAHARE HO KIT:
TLHALOSO NTHO
QTY
1 CP3 ho adaptara ea enjine
1
2 Hose ea phepelo ea mafura
1
3 Hose ea ho khutlisa mafura
1
4 Mohala oa peterole oa khatello e phahameng
1
5 Mohala oa phepelo ea mafura a khatello e tlase
2
6 CP3 Feed Fitting & Tiel Washer
1
7 CP3 ea ho kenya le ho tiisa washer
1
8 Hose clamps
5
9 Nate ea terene ea mafura
1
10 O-ring (block adapter le pompo nko)
2
11 M8x1.25x35mm liboutu
3
12 Regulator katoloso marapo
1
13 Mohala oa peterole o tlase (S-line ke mohala oa boikhethelo bakeng sa ho sebelisoa feela literakeng tse nang le 'maraka o latelang
1
pompo ea phahamisa)
14 Cascade khutlisetsa peterole line
1
15 Mohala oa mafura oa Cascade
1
16 CP3 cascade banjo bolt
1
17 Cascade block
1
18 9/16 ″ O-ring plug
1
19 14 limilimithara tse hlatsoang koporo
3
20 10 limilimithara tse hlatsoang koporo
2
21 10 mm x 1.0 bolt ea banjo
1
22 Polaka ea terene ea mafura
1
23 CP3 Ente Pump E kenyelelitsoe feela ho FPE-LML-CP3-WP le FPE-LML-CP3-10 (-10 e bontšitsoeng) 1
24 Setikara sa CARB EO (ha sea bontšoa)
1
5
14 15 21 18
17 16
19 20
4 12
1
2
9
10
7 6
22
11
23
13 3 8
Leqephe la 3 la 9
LITLHAHISO TSA HO KENYA CP3 CONVERSION KITS · Tlosa le ho hlahloba taolo e phahameng ea khatello ea mafura bakeng sa litšila. Haeba lithōle li fumanoa ho molaoli oa peterole ea khatello e phahameng, re khothalletsa hore ho nkeloe sebaka sa molaoli, melapo ea ho khutlisa injector, le kopano ea valve ea ho hlahloba.
GM Pressure Regulator: P/N 12611872 GM Injector Return Lines and Regulator: P/N 12639000
· Lekola washer e tiisang mochining oa mocheso oa mafura bakeng sa tšenyo leha e le efe, mefokolo, kapa ho bola holim'a washer. Sesepa sa ho tiisa ha se nkeloe sebaka ka bomong, kahoo kopano ea sensor e tla hloka ho nkeloa sebaka haeba ho na le tšenyo, mefokolo kapa kutu. Lekola tiiso ea banjo moleng oa phepelo ea ente ea dosing. Kenya sebaka ha ho hlokahala.
GM Fuel Temperature Sensor: P/N 12643002 GM Return Hose Banjo Seal P/N: 12630832 GM Dosing Injector Feed Line P/N: 12656313
· Hloekisa 'me hanyenyane lubricate le tlaase-khatello mafura phepelo compression e loketseng ho nolofatsa tlhomamiso phuleng. Re khothaletsa ho khutlisa peipi e teng ea phepelo ea mafura kaha ho lutla ho ka hlaha ka lebaka la ho holofala kapa ho bola libakeng tsa ho nyalana ha mochini o hatellang.
Pipe ea Phepelo ea Mafura ea GM: P/N 12654066
LITSELA TSA LINE LE HOSE BAKENG SA CP3 CONVERSION KITS
Mohala o Tlase oa Phepelo ea Mafura: Ntho ea 5 ka kit
Hose ea Phepelo ea Mafura: Ntho ea 2 ka kit
Leqephe la 4 la 9
Fuel Return Hose: Ntho ea 3 ka kit
High Pressure Fuel Line: Ntho ea 4 ka kit
Leqephe la 5 la 9
Methalo ea ho Khutlisa le ho Fepa: Lintlha tsa 14 le 15 ka har'a khithi ea OE Dosing Injector Feed Line e sebelisitsoe hape (GM P/N: 12656313)
14 15
TLHALOSO EA BOHLOKOA BA MAFUSO
Fuel Control Actuator (FCA): Setsi sa taolo ea mafura se laola mafura ho tloha CP3 ho ea seporong sa mafura a khatello e phahameng 'me se ka lehlakoreng le ka morao la CP3. FCA e ka boela ea bitsoa REG 1. Lithapo tse fosahetseng kapa likhokahano tse fosahetseng li ka baka boemo ba ho se qale. Sehokedi se lokela ho ba le terata e tshehla le terata e ntsho.
Molaoli oa Khatello ea Mafura 2: Molaoli oa 2 o laola khatello ea seporo sa mafura a phahameng. E fumaneha ka pele ho seporo sa mafura se lehlakoreng la mokhanni. Sehokelo bakeng sa regulator se lokela ho ba le terata e pherese le terata e mosehla. Ho hloleha ha molaoli oa 2 ho tla etsa hore seporo sa peterole se nang le khatello e phahameng se se ke sa etsa khatello e lekaneng hore koloi e sebetse kapa e qale.
Fuel Injector Return Regulator: Molaoli oa ho khutlisa ente ea mafura ke taolo e sa feleng ea khatello 'me ha e na likhokahano tsa motlakase. Sistimi ea ho khutlisa e hloka bonyane 4 bar (58 psi) ho ba teng pele liente li qala ho sebetsa. Haeba mokhoa oa ho khutla o ke ke oa fihla ho 58 psi ha o qala enjene, ho tla hlokahala hore ho nkeloe sebaka sa ho khutlisa mela le molaoli. Karolo ena hangata e tla be e le haufi le thermostat housing enjeneng. Setšoantšo se ka ho le letona ha se bontše sebaka se kentsoeng. GM Injector Return Lines le Regulator: P/N 12639000
Leqephe la 6 la 9
Leqephe la 7 la 9
LIEKETSENG MATHATA
LETŠOAO: HO PHATLA TLAS'A POTLAKO
Mohato oa 1 Mohato oa 2
Na koloi e na le pompo ea lifti ea 'maraka oa morao-rao?
Lekanya khatello ea phepelo ea mafura ho tsoa pompong ea phahamiso ho CP3. Khatello ea phepelo ea mafura sebakeng sa 2-3 psi ho CP3 e khothaletsoa. Haeba khatello ea phepelo ea mafura e fumanoa e le ka holimo ho 5 psi, fokotsa khatello ho 2-3 psi 'me u hlahlobe hape ho phahama tlas'a ho potlakisa.
Haeba ho joalo, tsoela pele ho mohato oa 2
Haeba ho joalo, tsoela pele ho mohato oa 3
Haeba ho se joalo, fetela mohatong oa 3
Na khatello ea phepelo ea mafura ho CP3 e netefalitsoe hore e ka tlase ho 5 psi? Mohato oa 3 E ne e le mohala o mocha oa ho khutlisa ente le molaoli oa ho khutla (khatello e sa feleng
valve) e kentsoeng nakong ea ho kenya lisebelisoa tsa phetoho ea CP3?
Mohato oa 4 Na koloi e sebetsa ka tokiso efe kapa efe ea morao-rao?
Mohato oa 5 Mohato oa 6
Ikopanye le Fleece Performance bakeng sa thuso e eketsehileng ea tekheniki. Netefatsa ka mohloli oa hau oa tokiso hore litekanyetso tsa "fuel control actuator" (FCA) li lekana le boleng ba stock ea OEM kapa sebelisa boleng bo fanoeng tafoleng e ka tlase.
Haeba ho joalo, tsoela pele ho mohato oa 4
Haeba ho joalo, tsoela pele ho mohato oa 6
Haeba ho se joalo, tlosa mela ea ho khutlisa ea ente le regulator,
GM P/N 12639000 Haeba che, fetela mohatong oa 5
Haeba litekanyetso tsa hau li lekana le palo ea setoko kapa tafole e ka tlase, hlahloba mokhanni oa FCA ho ECM. Mokhanni ea nang le phoso kapa ea fokolang a ka etsa hore enjene e be matla. Kenya tlhahlobo ea ECM kapa sebaka sa ECM ha ho hlokahala.
Leqephe la 8 la 9
LETŠOAO: CRANK NO QALA
Mohato oa 1
Mohato oa 2
Mohato oa 3 Mohato oa 4 Mohato oa 5 Mohato oa 6
Netefatsa hore mafura a lekaneng a fihla ho CP3 'me a hlakotsoe tšitiso leha e le efe ea moea meleng ea phepelo ea mafura. Na khatello e lekaneng ea mafura ho CP3 e netefalitsoe? Hokela mohala oa phepelo ea mafura oa CP3 mohloling o hole oa mafura o fetang sistimi ea mafura a khatello e tlase. Leka ho qala koloi. Na koloi e qala? Na koloi e na le pompo ea lifti ea 'maraka oa morao-rao? Khatello ea phepelo ea mafura sebakeng sa 2-3 psi ho CP3 e khothaletsoa. Na pompo ea phahamiso e fihlella khatello ea eona e lekantsoeng ea ts'ebetso?
Lokisa pompo e phahamisang khatello e tlase. Khatello ea phepelo ea mafura sebakeng sa 2-3 psi ho CP3 e khothaletsoa. Hlahloba le ho lokisa tsamaiso ea mafura a khatello e tlase. Lintlha tse latelang ke lintlha tse ka 'nang tsa hlōleha.
Haeba ho joalo, tsoela pele Haeba che, tsoela pele
ho mohato oa 7
ho mohato oa 2
Haeba ho joalo, tsoela pele Haeba che, tsoela pele
ho mohato oa 3
ho mohato oa 7
Haeba ho joalo, tsoela pele ho mohato oa 4
Haeba ho joalo, tsoela pele ho mohato oa 6
Haeba ho se joalo, fetela mohatong oa 6
Haeba ho se joalo, fetela mohatong oa 5
Lithapo tsa mafura tse nang le khatello e tlase: Lekola mapetsong le/kapa likhoele tse robehileng.
Fuel filter housing : Lekola hore na ha ho na moo peterole e thibileng teng kapa ntlo e petsohileng e lumellang moea hore o kene.
Fuel primer bulb: Lekola mapatso a lumellang moea ho kena le ho hloleha ho qala.
Fuel line flange e lekanang phuleng: Hlahloba ho lutla le ho kena ha moea tsamaisong ea mafura.
Mohato oa 7
Mohato oa 8 Mohato oa 9 Mohato oa 10 Mohato oa 11
Hose ea phepelo ea khatello e tlase ho CP3: Lekola mapetsong kapa ho lutla ho lumellang moea hore o kene. Na likhokelo tsohle tsa motlakase ho CP3 le sistimi ea mafura a khatello e phahameng li nepahetse? Bakeng sa FCA le Regulator 2, sheba leqephe la 6 la tokomane ena. Netefatsa hore sensor ea mocheso oa mafura sebakeng sa cascade block e hokahane le hore likhokahano tsohle tsa lithapo li entsoe ka nepo. Na likhokelo tsohle tsa motlakase li nepahetse? Lekola le ho hokahanya lithapo hape libakeng tsa tsona tse nepahetseng ka har'a sistimi ea mafura a khatello e phahameng. Na khatello ea sebele ea terene ea mafura e tšoana le khatello e laetsoeng? Khatello ea terene nakong ea cranking e lokela ho ba bonyane 1500 psi. Khatello ea terene nakong e lokela ho ba ka har'a 4500 - 5000 psi range. Na mafura aa khutla ho e-na le hore a fihle seporong sa mafura?
Hatella tsamaiso ea mafura a khutlang ka ho hokahanya sekepe sa teko ho ente ea 9 'me u hatelle tsamaiso ka moea oa lebenkele. Haeba koloi e qala, nkela sebaka sa ho khutlisa li-injector le regulator (GM P/N 126390000).
Haeba ho joalo, tsoela pele ho mohato oa 9
Haeba ho joalo, tsoela pele ho mohato oa 14
Haeba ho joalo, tsoela pele ho mohato oa 11
Haeba ho se joalo, fetela mohatong oa 8
Haeba ho se joalo, fetela mohatong oa 10
Haeba ho se joalo, fetela mohatong oa 12
Leqephe la 9 la 9
LETŠOAO: CRANK NO QALA (E TSOELA PELE)
Leqephe la 3 la 3
Mohato oa 12 Mohato oa 13
Mohato oa 14
Mohato oa 15
Na mohala oa phepelo ea mafura a khatello e phahameng ho tloha CP3 ho ea seporong sa mafura ha o na tšenyo kapa ho lutla? Kenya sebaka sa mohala oa phepelo ea mafura a khatello e phahameng 'me u netefatse hore polymer isolator e kentsoe hantle. Ho thothomela ha enjene ho tla senya mohala oa khatello e phahameng haeba isolator e sa kenngoa ka nepo. Sheba setšoantšo sa pele leqepheng la 5 la tokomane ena. Na polaka ea terene ea mafura e lutse hantle 'me nate e torque ho fihla ho 22 ft-lbs? Seporo sa terene se hlephileng kapa se lutseng ka mokhoa o sa lokelang se tla lumella moea ho kena seporong sa mafura 'me se ka baka boemo ba ho se qale. Na torque ea seporo sa peterole e netefalitsoe? Tlosa nate, hloekisa, 'me u tsosolose polaka ea terene. Torque linate ho 22 ft-lbs.
Haeba ho joalo, tsoela pele Haeba che, tsoela pele
ho mohato oa 14
ho mohato oa 13
Haeba ho joalo, tsoela pele Haeba che, tsoela pele
ho mohato oa 16
ho mohato oa 15
Haeba ho joalo, tsoela pele ho mohato oa 16
Mohato oa 16
Na crank ha e qale ho tsoela pele? Netefatsa ka mohloli oa hau oa tokiso hore litekanyetso tsa "fuel control actuator" (FCA) li lekana le boleng ba stock ea OEM kapa u sebelise boleng bo fanoeng tafoleng leqepheng la 7.
Haeba ho joalo, tsoela pele ho mohato oa 17
Haeba litekanyetso tsa hau li lekana le palo ea setoko kapa tafole e ka tlase, hlahloba mokhanni oa FCA ho ECM. Mokhanni ea nang le phoso kapa ea fokolang a ka etsa hore enjene e be matla. Kenya tlhahlobo ea ECM kapa sebaka sa ECM ha ho hlokahala.
Na crank ha e qale ho tsoela pele? Mohato oa 17 Ikopanye le Fleece Performance bakeng sa tšehetso e eketsehileng ea tekheniki.
Litokomane / Lisebelisoa
 |
FLEECE PERFORMANCE ENGINEERING FPE-LML-CP3-NP LML Duramax CP3 Conversion Kit [pdf] Litaelo FPE-LML-CP3-NP, FPE-LML-CP3-WP, FPE-LML-CP3-10, FPE-LML-CP3-NP LML LML Duramax CP3 Conversion Kit, FPE-LML-CP3-NP, LML Duramax CP3 Conversion Kit, Duramax CP3 Conversion Kit, Conversion Kit |