audio-technica ES964 Boundary Microphone Array
Tlhahisoleseding ya Sehlahiswa
Litlhaloso
- Lebitso la Sehlahiswa: ES964 Moeli oa Microphone Array
- Puo: Senyesemane
Litlhokomelo tsa Tšireletso
Le hoja sehlahisoa sena se etselitsoe ho sebelisoa ka mokhoa o sireletsehileng, ho hlōleha ho se sebelisa ka nepo ho ka baka kotsi. Ho netefatsa polokeho, ela hloko litemoso tsohle le litemoso ha u ntse u sebelisa sehlahisoa.
Litemoso bakeng sa Sehlahisoa
- Se ke oa beha sehlahisoa ho ts'usumetso e matla ho qoba ho se sebetse hantle.
- Se ke oa qhaqha, oa fetola kapa ua leka ho lokisa sehlahisoa.
- U se ke ua tšoara sehlahisoa ka matsoho a metsi ho qoba ho tsosoa ke motlakase kapa kotsi.
- U se ke ua boloka sehlahisoa tlas'a letsatsi le tobileng, haufi le lisebelisoa tsa ho futhumatsa kapa sebakeng se chesang, se mongobo kapa se lerole.
- Se ke oa beha sehlahisoa sebakeng se sa tsitsang ho qoba kotsi kapa ho se sebetse hantle ka lebaka la ho oa kapa tse ling tse joalo.
Lintlha mabapi le Tšebeliso
Litaba tsa Sephutheloana
- Lenane la Microphone
- Mohala oa Microphone
- RJ45 Breakout Cables (A le B)
Karolo ea Mabitso le Mesebetsi
Holimo
- Liphetoho tsa Talk: E fetoha lipakeng tsa ho khutsa le ho khutsisa.
- 'Mele oa Microphone: 'Mele o ka sehloohong oa microphone.
Lehlakore
- Sesupo sa Puo Lamp: E bontsha boemo ba semumu/buisa ka mmala wa sesupo lamp hore mabone.
Tlase
- SW. MOSEBETSI: E beha hore na li-switches tsa lipuo li sebetsa joang.
- TAOLI: E beha hore na maekrofono o koetsoe kapa ha o buuoe le hore na sesupo sa puo lamp e bonesoa ka ho sebedisa sehlahiswa kapa sesebedisoa sa taolo ya kantle.
- MEBALA EA LED: U ka khetha 'mala oo letšoao la ho bua lamp mabone ha a koetsoe/ho buusoa.
Litaelo tsa Tšebeliso ea Sehlahisoa
Mokhoa oa Ts'ebetso
Nako le nako ha u tšoara sesebelisoa sa ho bua, maekerofounu oa buloa kapa oa tima.
- Maekerofounu e buletswe ha feela o ntse o thetsa switch switch.
- Maekerofounu oa tima ha o emisa ho thetsa switch switch.
Mekhoa ea ts'ebetso
SW. MOSEBETSI
- AMA: Maekerofounu e timme ha feela o ntse o thetsa switch switch. Maekerofounu e buletswe ha o kgaotsa ho thetsa switch switch.
- ON/OFF MM.: Nako le nako ha u tšoara sesebelisoa sa ho bua, maekerofounu oa buloa kapa oa tima.
TAolo
- LEHAE: Maekerofounu e kgutsitswe/ha e buelle ho sebedisa switch switch sehlahiswang. Lesupa la puo lamp e boetse e khantša hammoho le ts'ebetso ea ho bua.
- KHOPOTSO: Maekerofounu e dula e le teng. Lesupa la puo lamp mabone hammoho le ts'ebetso ea li-switches tsa ho bua 'me tlhahisoleseding ea ts'ebetso e fetisetsoa ho sesebelisoa sa ho laola ka ntle ka mochine oa CLOSURE. Sesebediswa sa taolo ya kantle se laola ho homola/ho buisa.
- LED REMOTE: Maekerofounu e lula e lutse, 'me sesebelisoa sa taolo ea kantle se laola ho khutsisa / ho se bue le ho khantša sesupo sa puo l.amp. Tlhahisoleseding ya tshebetso ya switch switch e fetisetswa ho sesebediswa sa taolo sa kantle ka theminale ya CLOSURE.
Mokhoa oa ho hokahanya
Mohato oa 1:
Hokela li-terminals tsa tlhahiso (RJ45 jacks) ho thapo ea maekerofounu ho lithapo tse kenyellelitsoeng tsa RJ45 ka ho sebelisa likhoele tsa STP tse fumanehang khoebong. Hokela li-terminals tsa tlhahiso ea maekrofono A le B ho lithapo tsa ho phatloha tsa RJ45 A le B, ka ho latellana.
Mohato oa 2:
Kopanya li-terminals tsa tlhahiso ho lithapo tsa ho senya tsa RJ45 ho sesebelisoa se nang le microphone input (ho kenya letsoho ho leka-lekaneng) e lumellanang le phantom ea matla a phantom.
FAQ (Lipotso Tse Botsoang Hangata)
- P: A na nka qhaqha kapa ho fetola sehlahisoa?
A: Che, ho qhaqholla kapa ho fetola sehlahisoa ho ka baka ho se sebetse hantle 'me ha ho khothalletsoe. - P: Ke khetha joang 'mala oa pontšo ea puo lamp?
A: U ka khetha 'mala oa pontšo ea ho bua lamp ho sebelisa tlhophiso ea Mmala oa LED botlaaseng ba maekrofono.
Litlhokomelo tsa Tšireletso
Le hoja sehlahisoa sena se etselitsoe ho sebelisoa ka mokhoa o sireletsehileng, ho hlōleha ho se sebelisa ka nepo ho ka baka kotsi. Ho netefatsa polokeho, ela hloko litemoso tsohle le litemoso ha u ntse u sebelisa sehlahisoa.
Litemoso bakeng sa sehlahisoa
- Se ke oa beha sehlahisoa ho ts'usumetso e matla ho qoba ho se sebetse hantle.
- Se ke oa qhaqha, oa fetola kapa ua leka ho lokisa sehlahisoa.
- U se ke ua tšoara sehlahisoa ka matsoho a metsi ho qoba ho tsosoa ke motlakase kapa kotsi.
- U se ke ua boloka sehlahisoa tlas'a letsatsi le tobileng, haufi le lisebelisoa tsa ho futhumatsa kapa sebakeng se chesang, se mongobo kapa se lerole.
- Se ke oa beha sehlahisoa sebakeng se sa tsitsang ho qoba kotsi kapa ho se sebetse hantle ka lebaka la ho oa kapa tse ling tse joalo.
Lintlha Tse Sebelisitsoeng
- Se ke oa tsoka microphone ka ho tšoara thapo kapa ho hula thapo ka matla. Ho etsa joalo ho ka baka ho khaoha kapa ho senya.
- Se ke oa kenya haufi le li-air conditioner kapa lisebelisoa tsa mabone, kaha ho etsa joalo ho ka baka ho se sebetse hantle.
- Se ke oa sokela thapo ho potoloha raka kapa ua lumella thapo hore e pinche.
- Kenya maekrofono sebakeng se bataletseng se sa koaloang. Etsa bonnete ba hore mohloli oa molumo ha o ka tlase ho sebaka se holimo.
- Ho beha ntho leha e le efe holim'a metsi (joaloka tafole ea likopano) pele qetello ea eona e phekoloa ka ho feletseng ho ka baka tšenyo qetellong.
Likahare tsa sephutheloana
- Microphone
- Mohala oa ho phatloha oa RJ45 × 2
- Rabara e itšehla thajana
- Ho lokisa linate
- Adapter ea ho kenya tafoleng
- Sekurufu sa ho kenya adaptara ea tafole × 3
Mabitso a likarolo le mesebetsi
Holimo
- Li-switches tsa ho bua
E fetoha lipakeng tsa ho khutsa le ho khutsisa. - 'Mele oa maekrofono
Lehlakore
- Lesupa la puo lamp
E bontsha boemo ba semumu/buisa ka mmala wa sesupo lamp hore mabone.
Tlase
- SW. MOSEBETSI
E beha hore na li-switches tsa lipuo li sebetsa joang.Mokhoa Mokhoa oa ts'ebetso HLAKELA PHAHAMA Nako le nako ha u tšoara sesebelisoa sa ho bua, maekerofounu oa buloa kapa oa tima. MAMA. TSOELA
Maekerofounu e buletswe ha feela o ntse o thetsa switch switch. Maekerofounu oa tima ha o emisa ho thetsa switch switch. MAMA. TLOA
Maekerofounu e timme ha feela o ntse o thetsa switch switch. Maekerofounu e buletswe ha o kgaotsa ho thetsa switch switch. - TAolo
E beha hore na maekrofono o koetsoe kapa ha o buuoe le hore na sesupo sa puo lamp e bonesoa ka ho sebedisa sehlahiswa kapa sesebedisoa sa taolo ya kantle.Mokhoa Tshebetso SEBAKA
Maekerofounu e kgutsitswe/ha e buelle ho sebedisa switch switch sehlahiswang. Lesupa la puo lamp e boetse e khantša hammoho le ts'ebetso ea ho bua. TLHOKOMELO
Maekerofounu e dula e le teng. Lesupa la puo lamp mabone hammoho le ts'ebetso ea li-switches tsa ho bua 'me tlhahisoleseding ea ts'ebetso e fetisetsoa ho sesebelisoa sa ho laola ka ntle ka mochine oa CLOSURE. Sesebediswa sa taolo ya kantle se laola ho homola/ho buisa. LED KHOTHA
Maekerofounu e lula e lutse, 'me sesebelisoa sa taolo ea kantle se laola ho khutsisa / ho se bue le ho khantša sesupo sa puo l.amp. Tlhahisoleseding ya tshebetso ya switch switch e fetisetswa ho sesebediswa sa taolo sa kantle ka theminale ya CLOSURE. - Mebala ea LED
U ka khetha 'mala oo letšoao la ho bua lamp mabone ha a koetsoe/ho buusoa.
Mokhoa oa ho kopanya
- Hokela li-terminals tsa tlhahiso (li-jacks tsa RJ45) ho thapo ea maekerofounu ho lithapo tse kenyellelitsoeng tsa RJ45 ka ho sebelisa likhoele tsa STP tse fumanehang khoebong.
- Hokela li-terminals tsa tlhahiso ea maekrofono A le B ho lithapo tsa phallo tsa RJ45 A le B, ka ho latellana.
- Sethala sa tlhahiso ea maekrofono A
- Cable ea STP e fumanehang khoebong (MIC 1 ho isa MIC 3)
- RJ45 thapo e phatlohang ea A
- Theminale ea tlhahiso ea microphone B
- Cable ea STP e fumanehang khoebong (taolo ea LED / CLOSURE control)
- Mohala oa ho phatloha oa RJ45 B
- Hokela li-terminals tsa tlhahiso ea maekrofono A le B ho lithapo tsa phallo tsa RJ45 A le B, ka ho latellana.
- Kopanya li-terminals tsa tlhahiso ho lithapo tsa ho senya tsa RJ45 ho sesebelisoa se nang le microphone input (ho kenya letsoho ho leka-lekaneng) e lumellanang le phantom ea matla a phantom.
- Tlhaloso: MIC 1
- Tlhaloso: MIC 2
- Tlhaloso: MIC 3
- Taolo ea LED
- HO TLOA taolo
- Letoto la ATDM DIGITAL SMARTMIXER™
- Motsoaki oa motho oa boraro
- Sehlahisoa se hloka 20 ho 52 V DC phantom ea motlakase bakeng sa ts'ebetso.
- Lihokelo tse hlahisoang ke lihokelo tsa Euroblock tse nang le polarity joalo ka ha ho bonts'itsoe "tafoleng ea Wiring".
Tafole ea lithapo
- Sehlahisoa sa microphone ke impedance e tlaase (Lo-Z), mofuta o leka-lekaneng. Lipontšo li hlahisoa ho para e 'ngoe le e 'ngoe ea li-connectors tsa Euroblock ho lithapo tsa RJ45 tsa breakout. Audio grounding e finyelloa ka khokahanyo e sirelelitsoeng. Sephetho sa sehokelo se seng le se seng sa Euroblock se bonts'itsoe ho pin assignment.
- MIC 1 ke "O" (omnidirectional) le MIC 2 ke "L" (bidirectional), 'me bobeli ba bona ba behiloe ho 240 ° ka holimo. MIC 3 ke “R” (bidirectional), mme e behilwe ho 120° ka ho rapama. Tsena li kopantsoe ho etsa mokhoa oa tataiso ka tsela leha e le efe e lakatsehang.
- Tatelano ea PIN ea li-terminals tsa tlhahiso e tjena.
HO TSWA A
Li-PIN le mesebetsi ea lihokelo tsa RJ45 le mebala ea likhoele tsa ho phatloha tsa RJ45 li tjena.
| Pin No. / Mosebetsi | Cable mmala |
| PIN 1 / MIC 2 L (+) | Brown |
| PIN 2 / MIC 2 L (-) | namunu |
| PIN 3 / MIC 3 R (+) | Botala |
| PIN 4 / MIC 1 O (-) | Bosoeu |
| PIN 5 / MIC 1 O (+) | Khubedu |
| PIN 6 / MIC 3 R (-) | Boputsoa |
| PIN 7 / GND | Ntsho |
| PIN 8 / GND | Ntsho |
HO TSWA B
Linomoro tsa pin le mesebetsi ea li-connectors tsa RJ45 le mebala ea lithapo tsa ho senya RJ45 ke tse latelang.
| Pin No. / Mosebetsi | Cable mmala |
| PIN 1 / Ha e na letho | – |
| PIN 2 / Ha e na letho | – |
| PIN 3 / LED | Botala |
| PIN 4 / Ha e na letho | – |
| PIN 5 / HO TLOA | Khubedu |
| PIN 6 / Ha e na letho | – |
| PIN 7 / GND | Ntsho |
| PIN 8 / GND | Ntsho |
Mosebetsi oa Pin
Tlhaloso: MIC 1
- O+
- O-
- GND
Tlhaloso: MIC 2
- L+
- L-
- GND
Tlhaloso: MIC 3
- R+
- R-
- GND
Taolo ea LED
- GND
- LED (e tala)
HO TLOA taolo
- GND
- HO CLOSURE (khubelu)
Mokhoa oa ho kenya
Mokhoa oa ho kenya sehlahisoa
Sehlahisoa se kenngoa ka ho phunya lesoba tafoleng le ho sebelisa adaptara e kenyelelitsoeng ea tafole ho e tiisa tafoleng.
- Etsa qeto ea hore na u batla ho beha sehlahisoa hokae ebe u phunya lesoba tafoleng sebakeng seo.
- Ho hlokahala lesoba la bophara ba limilimithara tse 30 (1.2”). Hape, botenya bo boholo ba tafole ke 30 mm (1.2 ").
- Ho hlokahala lesoba la bophara ba limilimithara tse 30 (1.2”). Hape, botenya bo boholo ba tafole ke 30 mm (1.2 ").
- Tlosa li-screws tsa ho lokisa cable ka tlase ho microphone.
- Boloka 'me u se ke ua lahleheloa ke li-screws tse tlositsoeng tsa cable. U tla li hloka haeba u ka etsa qeto ea ho sebelisa sehlahisoa ntle le ho se hokela tafoleng.
- Hokela adaptara ea ho beha tafole ka tlase ho maekrofono.
- Hokela adaptara holim'a tafole le li-screws tse kenyellelitsoeng tsa ho kenya adaptara.
- Hokela adaptara ea tafole e le hore thapo e tsamaee haufi le adaptara ea thaba. U se ke ua fetisa thapo ka hare ho tafole thaba adaptara.
- Fetisa pheletso ea thapo ho theosa le lesoba la tafole ebe u fetisa adaptara ea ho kenya tafole ka lesoba. Ka mor'a moo, fetisetsa rabara e itšehlang thajana ho potoloha adaptara ea tafole 'me u e kenye ka lesoba la tafole, ho etsa bonnete ba hore thapo e tsamaisana le sekeno sa rabara.
- Adapter ea ho kenya tafoleng
- Cable
- Rabara e itšehla thajana
- Fetola tsela eo maekrofono a shebaneng le eona.
- Fetola tsela eo maekrofounu a shebaneng le eona e le hore logo ea Audio-Technica e shebane le pele ha e sebelisoa.
- Tobetsa nate ea ho lokisa ho tiisa microphone.
- Ho lokisa linate
Ho hlophisoa ntle le ho sebelisa adaptara ea tafole
Ha e kentsoe le ho kengoa ntle le ho sebelisa adaptara ea ho beha tafole le ntle le ho phunya lesoba la bophara ba 30 mm (1.2”) tafoleng, maekerofounu e sirelelitsoe ho sebelisoa likoti tse peli tse bonts'itsoeng setšoantšong se ka tlase.
- Tlosa li-screw fixing tsa cable ka tlase ho maekrofounu 'me u sebelise li-screw tse fumanehang khoebong. Saese ya screw e lokela ho ba M3 P=0.5 mme bolelele ba screw ha boa lokela ho feta 7 mm (0.28") ho tloha tlase ho hlooho ho isa ntlheng ea screw.
- Li-Screw (li fumaneha khoebong)
- Screw masoba
Ho koaheloa ha molumo
Bakeng sa tšireletso ea 360 °
- E etsa lipaterone tse 'ne tsa hypercardioid (Tloaelehileng) ho 0°, 90°, 180°, le 270°.
- Tlhophiso ena e loketse ho rekota ka hohle-hohle puisano pakeng tsa batho ba bane ba lutseng tafoleng e chitja.
Ha o hokela letotong la ATDM DIGITAL SMARTMIXER™, mofuta oa ho kenya bakeng sa liteishene tsa 1-3 o behiloe ho "Virtual Mic" ka mokhoa o ikhethileng, leha ho le joalo, haeba tšireletso ea molumo e tla aroloa ka likarolo tse 'ne kapa ho feta joalo ka ha ho bonts'itsoe ho ex.ample, seta mofuta oa ho kenya ho "Virtual Mic" bakeng sa likanale tsa 4 ho ea pele. Bakeng sa litaelo tse felletseng tsa ts'ebetso, sheba bukana ea mosebelisi ea ATDM DIGITAL SMARTMIXER™.
Bakeng sa tšireletso ea 300 °
- E etsa lipaterone tse tharo tsa cardioid (Bophara) ho 0°, 90°, le 180°.
- Sebaka sena se loketse ho qala moqoqo pakeng tsa batho ba bararo ba lutseng qetellong ea tafole.
Ha u kenya 2 kapa ho feta sehlahisoa sena
Re khothaletsa hore li-microphone li behoe bonyane 1.7 m (5.6′) (bakeng sa boemo ba hypercardioid (Tlwaelehileng) ka thoko e le hore likhaso tsa maekerofounu ka 'ngoe li se ke tsa kopana.
Litlhophiso tsa mixer
E sebelisa letoto la ATDM DIGITAL SMARTMIXER™
Firmware ea letoto la ATDM DIGITAL SMARTMIXER™ e lokela ho ba tsa morao-rao pele e sebelisoa.
- Qala ho Web Hole, khetha "Motsamaisi" 'me u kene.
- Bakeng sa litlhophiso le lits'ebetso tse latelang, sheba letoto la ATDM DIGITAL SMARTMIXER™ User Manual.
Ha u sebelisa li-mixer tse ling
Ha u sebelisa sehlahisoa se nang le motsoako o mong ntle le letoto la ATDM DIGITAL SMARTMIXER ™, o ka fetola tlhahiso ea mocha ka mong ho latela matrix a kopanyang a latelang ho laola tataiso.
Ha motsoako oa matrix o "tloaelehile"
|
Tsela ea ho lata |
O | L | R | |||
| φ | Boemo | φ | Boemo | φ | Boemo | |
| 0° | + | -4 dB | – | 0dB | – | 0dB |
| 30° | + | -4 dB | – | +1.2 dB | – | -4.8 dB |
| 60° | + | -4 dB | – | 0dB | – ∞ | |
| 90° | + | -4 dB | – | -4.8 dB | + | -4.8 dB |
| 120° | + | -4 dB | – ∞ | + | 0dB | |
| 150° | + | -4 dB | + | -4.8 dB | + | +1.2 dB |
| 180° | + | -4 dB | + | 0dB | + | 0dB |
| 210° | + | -4 dB | + | +1.2 dB | + | -4.8 dB |
| 240° | + | -4 dB | + | 0dB | – ∞ | |
| 270° | + | -4 dB | + | -4.8 dB | – | -4.8 dB |
| 300° | + | -4 dB | – ∞ | – | 0dB | |
| 330° | + | -4 dB | – | -4.8 dB | – | +1.2 dB |
Ha motsoako o kopanyang o le "Wide"
|
Tsela ea ho lata |
O | L | R | |||
| φ | Boemo | φ | Boemo | φ | Boemo | |
| 0° | + | 0dB | – | 0dB | – | 0dB |
| 30° | + | 0dB | – | +1.2 dB | – | -4.8 dB |
| 60° | + | 0dB | – | 0dB | – ∞ | |
| 90° | + | 0dB | – | -4.8 dB | + | -4.8 dB |
| 120° | + | 0dB | – ∞ | + | 0dB | |
| 150° | + | 0dB | + | -4.8 dB | + | +1.2 dB |
| 180° | + | 0dB | + | 0dB | + | 0dB |
| 210° | + | 0dB | + | +1.2 dB | + | -4.8 dB |
| 240° | + | 0dB | + | 0dB | – ∞ | |
| 270° | + | 0dB | + | -4.8 dB | – | -4.8 dB |
| 300° | + | 0dB | – ∞ | – | 0dB | |
| 330° | + | 0dB | – | -4.8 dB | – | +1.2 dB |
Ho Sebelisa Sehlahisoa
Fetoha pakeng tsa semumu le ho se bue
- Tobetsa konopo ea ho bua hang.
- Nako le nako ha o ama switch switch, maekrofono o fetoha pakeng tsa semumu/buisa.
- U ka fetola tlhophiso ea ts'ebetso e sa bueng ka "SW. MOSEBETSI” switjha. Bakeng sa lintlha tse ling, sheba "Fetola litlhophiso le lits'ebetso".
Lesupa la puo lamp mabone.
- Li-switches tsa ho bua
- Lesupa la puo lamp
U ka fetola 'mala oa LED oa pontšo ea puo lamp ka "MIC ON" le "MIC OFF" e letsetsa tlas'a "LED COLOR." Ho fumana lintlha, sheba "Ho seta mebala ea LED".
Fetola maemo le mesebetsi
- SW. MOSEBETSI
- TAolo
- Mebala ea LED
- Boemo ba ho koala lebitso (boemo ba ts'ebetso ea maekrofono)
Ho beha mebala ea LED
U ka khetha 'mala oa LED oa pontšo ea puo lamp e bonesang ha maekerofounu e butswe/e tima.
- Tlosa mohala oa "MIC OFF"/"MIC ON" ho nomoro ea 'mala oo u lakatsang ho o beha molemong oa ho tima/ho tima maeke.
| Nomoro | Mmala oa LED |
| Δ | Ha e bonesitsoe |
| 1 | Khubedu |
| 2 | Botala |
| 3 | Bosehla |
| 4 | Boputsoa |
| 5 | Magenta |
| 6 | Cyan |
| 7 | Bosoeu |
Haeba CONTROL e le "LOCAL"
O ka seta mokhoa oa ts'ebetso ho o mong oa mekhoa e meraro: "TOUCH ON/OFF" (touch-on/touch-off), "MOM. ON” (touch-to-talk), kapa “MME. TIMA” (to-to-ho-mute).
Haeba SW. MOSEBETSI ke "TOUCH ON/OFF" (touch-on/touch-off)
- Nako le nako ha u tšoara sesebelisoa sa ho bua, maekrofono oa buloa le ho tima.
- Ha microphone e buletsoe, mabone a LED ka 'mala o khethiloeng tlas'a "MIC ON,"' me ha o tingoa, mabone a LED a 'mala o khethiloeng tlas'a "MIC OFF."
Haeba SW. MOSEBETSI ke “’MÈ. ON” (touch-to-bulk)
- Maekerofounu e buletswe ha feela o ntse o thetsa switch switch. Maekerofounu oa tima ha o emisa ho thetsa switch switch.
- Ha microphone e buletsoe, mabone a LED ka 'mala o khethiloeng tlas'a "MIC ON,"' me ha o tingoa, mabone a LED a 'mala o khethiloeng tlas'a "MIC OFF."
Haeba SW. MOSEBETSI ke “’MÈ. TIMA” (ho thetsa ho isa ho semumu)
- Maekerofounu e timme ha feela o ntse o thetsa switch switch. Maekerofounu e buletswe ha o kgaotsa ho thetsa switch switch.
- Ha maekerofounu o tingoa, mabone a LED ka 'mala o khethiloeng tlas'a "MIC OFF",' me ha o buletsoe, mabone a LED a 'mala o khethiloeng tlas'a "MIC ON".
Haeba CONTROL e le "REMOTE"
- O ka seta mokhoa oa ts'ebetso ho o mong oa mekhoa e meraro: "TOUCH ON/OFF" (touch-on/touch-off), "MOM. ON” (touch-to-talk), kapa “MME. TIMA” (to-to-ho-mute). Leha ho le joalo, maekerofounu e lula e le ho efe kapa efe ea mekhoa ena, 'me ke mabone feela a pontšo ea puo lamp li-switches.
- Microphone e buloa le ho tima ke sesebelisoa sa taolo ea kantle.
Haeba SW. MOSEBETSI ke "TOUCH ON/OFF" (touch-on/touch-off)
Nako le nako ha o ama switch ea puo, sesupo sa puo lamp e bontšang hore na maekrofono o butse/o tima li-switches.
Haeba SW. MOSEBETSI ke “’MÈ. ON” (touch-to-bulk)
Lesupa la puo lamp e bontša hore maekerofounu o khantšitse mabone ha u ntse u thetsa sesebelisoa sa ho bua le sesupo sa ho bua lamp e bontša hore maekerofounu o tima mabone ha o emisa ho thetsa switch switch.
Haeba SW. MOSEBETSI ke “’MÈ. TIMA” (ho thetsa ho isa ho semumu)
Lesupa la puo lamp seo se bontša hore maekerofounu o tima mabone ha u ntse u thetsa switch switch. Lesupa la puo lamp seo se bontša hore maekerofounu o khantšitse mabone ha u khaotsa ho tšoara switch switch.
Haeba CONTROL e le "LED REMOTE"
- O ka seta mokhoa oa ts'ebetso ho o mong oa mekhoa e meraro: "TOUCH ON/OFF" (touch-on/touch-off), "MOM. ON” (touch-to-talk), kapa “MME. TIMA” (to-to-ho-mute). Leha ho le joalo, maekerofounu e lula e le ho efe kapa efe ea mekhoa ena, 'me mabone a sesupo sa puo lamp ha e fetohe.
- Maekerofounu oa buloa le ho tima le ho khantša sesupo sa puo lamp e faposoa ke sesebelisoa sa taolo ea kantle.
Haeba SW. MOSEBETSI ke "TOUCH ON/OFF" (touch-on/touch-off)
Maekerofounu ha e bule/ho tima leha o ka thetsa switch switch. Lebone la sesupo sa puo lamp ha e amane ka kotloloho le tšebetso ea 'mele oa maekrofono. Ho e-na le hoo, e laoloa ke sesebelisoa sa ka ntle.
Haeba SW. MOSEBETSI ke “’MÈ. ON” (touch-to-bulk)
Maekerofounu ha e bule/ho tima ha o ntse o thetsa switch switch kapa ha o sa tshwara switch switch. Lebone la sesupo sa puo lamp ha e amane ka kotloloho le tšebetso ea 'mele oa maekrofono. Ho e-na le hoo, e laoloa ke sesebelisoa sa ka ntle.
Haeba SW. MOSEBETSI ke “’MÈ. TIMA” (ho thetsa ho isa ho semumu)
Maekerofounu ha e bule/ho tima ha o ntse o thetsa switch switch kapa ha o sa tshwara switch switch. Lebone la sesupo sa puo lamp ha e amane ka kotloloho le tšebetso ea 'mele oa maekrofono. Ho e-na le hoo, e laoloa ke sesebelisoa sa ka ntle.
Ho hloekisa
Itloaetse ho hloekisa sehlahisoa khafetsa ho netefatsa hore se tla tšoarella nako e telele. Se ke oa sebelisa joala, pente e tšesaane kapa lintho tse ling tse qhibilihang bakeng sa ho hloekisa.
- Hlakola litšila sehlahisoa ka lesela le omeletseng.
- Haeba likhoele li silafala ka lebaka la mofufutso, joalo-joalo, li hlakole ka lesela le omeletseng hang kamora ho sebelisoa. Ho hlōleha ho hloekisa lithapo ho ka 'na ha etsa hore li senyehe 'me li thatafale ha nako e ntse e ea, 'me ha fella ka ho se sebetse hantle.
- Haeba sehlahisoa se ke ke sa sebelisoa nako e telele, se boloke sebakeng se nang le moea o lekaneng se se nang mocheso le mocheso o phahameng.
Ho batle phoso
Microphone ha e hlahise molumo
- Etsa bonnete ba hore li-terminals tsa A le B li hokahane sebakeng se nepahetseng sa khokahano.
- Etsa bonnete ba hore lithapo tse khaohang A le B li hokahane sebakeng se nepahetseng sa khokahano.
- Etsa bonnete ba hore lithapo tsa ho hokela li hoketsoe hantle.
- Etsa bonnete ba hore sesebelisoa se hokahaneng se fana ka matla a phantom hantle.
- Etsa bonnete ba hore sesebelisoa sa taolo ea kantle ha sea hlophisoa ho khutsa.
Lesupa la puo lamp ha e bonese
- Etsa bonnete ba hore ho daela "MIC ON"/"MIC OFF" bakeng sa "LED COLOR" ha e sotetsoe ho "Δ ” (ha ho mabone).
- Etsa bonnete ba hore sesebelisoa se hokahaneng se fana ka matla a phantom hantle le hore voltage nepahetse.
- Etsa bonnete ba hore sesebelisoa sa taolo ea kantle ha sea beoa ho tima sesupo sa puo lamp.
Litekanyo
Microphone
Adapter ea ho kenya tafoleng
Litlhaloso
| Element | Letlapa le khutlisitsoeng le sa fetoheng, le khutsitseng ka ho sa feleng |
| Mokhoa oa polar | Phetoho: Cardioid (Bophara) / Hypercardioid (Tlwaelehileng) |
| Karabelo ea khafetsa | 20 ho isa ho 15,000 Hz |
| Bula potoloho kutloelo-bohloko | Bophara: -33 dBV (22.4 mV) (0 dB = 1 V/Pa, 1 kHz)
Tloaelehileng: -35 dBV (17.8 mV) (0 dB = 1 V/Pa, 1 kHz) |
| Tšitiso | 100 ohm |
| Boholo ba modumo wa ho kenya | Bophara/Tlwaelehileng: 136.5 dB SPL (1 kHz ho 1% THD) |
| Karolelano ea pontšo ho lerata | Bophara: 68.5 dB (1 kHz ho 1 Pa, e boima ba A)
Tloaelehileng: 67.5 dB (1 kHz ho 1 Pa, A-weighted) |
| Fetoha | SW. MOSEBETSI: KHANYA ON/OFF, MME. ON, MMA. TLOA TAOLI: LEHAE, HOLE, LED REMOTE |
| Litlhoko tsa matla a Phantom | 20 ho isa ho 52 V DC, 19.8 mA (kakaretso ea likanale kaofela) |
| Ho koaloa ho ikopanya | Koalo ea ho koala voltage: -0.5 ho 5.5 V Matla a phahameng a lumellehang: 200 mW Ho hanyetsa: 100 ohms |
| Taolo ea LED | E sebetsa holimo (+5 V DC) TTL e tsamaellana Active low voltage: 1.2 V kapa ka tlase
Matla a phahameng a lumelletsoeng: -0.5 ho isa ho 5.5 V Matla a phahameng a lumelletsoeng: 200 mW |
| Boima ba 'mele | Maekerofounu: 364 g (13 oz) |
| Litekanyo (maekerofounu) | Boholo bo boholo ('mele): 88 mm (3.5")
Bophahamo: 22 limilimithara (0.87”) |
| Sehokedi se hlahisang | Mohokahanyi oa Euroblock |
| Kenyellelitsoe lisebelisoa | Cable ea RJ45 breakout × 2, adaptara ea holim'a tafole, nate ea ho lokisa, sekhetho sa rabara, sekheo sa ho kenya adaptara ea tafole × 3 |
- 1 Pascal = 10 dynes / cm2 = 10 microbars = 94 dB SPL
- Bakeng sa ntlafatso ea sehlahisoa, sehlahisoa se tlameha ho fetoloa ntle le tsebiso.
Mohlala oa pola / Karabelo khafetsa
Hypercardioid (Tlwaelehileng)
Mokhoa oa polar
Karabelo ea khafetsa
Cardioid (Bophara)
Mokhoa oa polar
Karabelo ea khafetsa
Matšoao a khoebo
SMARTMIXER ™ ke letshwao la kgwebo kapa letshwao la kgwebo le ngodisitsweng la Audio-Technica Corporation.
Mokhatlo oa Audio-Technica
2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Japane audio-technica.com.
©2023 Audio-Technica Corporation
Ikopanye le Tšehetso ea Lefatše: www.at-globalsupport.com.
Litokomane / Lisebelisoa
 |
audio-technica ES964 Boundary Microphone Array [pdf] Bukana ea Mosebelisi ES964 Boundary Microphone Array, ES964, Boundary Microphone Array, Microphone Array |
 |
audio-technica ES964 Boundary Microphone Array [pdf] Bukana ea Mosebelisi ES964 Boundary Microphone Array, ES964, Boundary Microphone Array, Microphone Array, Array |
 |
audio-technica ES964 Boundary Microphone Array [pdf] Bukana ea Mosebelisi ES964 Boundary Microphone Array, ES964, Boundary Microphone Array, Microphone Array |