audio-technica ES964 Ciam Teb Microphone Array
Cov ntaub ntawv khoom
Specifications
- Khoom npe: ES964 Ciam Teb Microphone Array
- Lus: Lus Askiv
Kev Tiv Thaiv Kev Nyab Xeeb
Txawm hais tias cov khoom no tau tsim los siv kom nyab xeeb, tsis siv nws kom raug yuav ua rau muaj xwm txheej. Txhawm rau kom muaj kev nyab xeeb, ua raws txhua qhov kev ceeb toom thiab kev ceeb toom thaum siv cov khoom.
Kev ceeb toom rau cov khoom
- Tsis txhob cuam tshuam cov khoom kom muaj kev cuam tshuam zoo kom tsis txhob ua haujlwm tsis zoo.
- Tsis txhob disassemble, hloov kho lossis sim kho cov khoom.
- Tsis txhob kov cov khoom nrog ob txhais tes ntub kom tsis txhob muaj hluav taws xob poob lossis raug mob.
- Tsis txhob khaws cov khoom nyob rau hauv lub hnub ncaj qha, ze rau cov khoom siv cua sov lossis hauv qhov chaw kub, ntub lossis plua plav.
- Tsis txhob muab cov khoom tso rau ntawm qhov chaw tsis ruaj khov kom tsis txhob raug mob lossis ua haujlwm tsis zoo vim kev poob lossis lwm yam.
Lus ceeb toom ntawm Kev Siv
Ntim Cov Ntsiab Lus
- Microphone Array
- Microphone Cable
- RJ45 Breakout Cables (A thiab B)
Cov npe thiab cov haujlwm
Sab saum toj
- Tham Switches: Hloov ntawm mute thiab unmute.
- Lub cev Microphone: Lub cev tseem ceeb ntawm lub microphone.
Sab
- Tham Indicator Lamp: Qhia qhov mute/unmute raws li xim ntawm qhov taw qhia lamp ntawd teeb.
Hauv qab
- SW. FUNCTION: Teem caij li cas cov lus sib tham ua haujlwm.
- CONTROL: Teem seb lub microphone puas yog muted/unmuted thiab seb tus hais lus taw qhia lamp yog lit los ntawm kev siv cov khoom lossis cov cuab yeej tswj xyuas sab nraud.
- LED Xim: Koj tuaj yeem xaiv cov xim uas qhov kev hais lus qhia lamp teeb thaum muted/unmuted.
Cov lus qhia siv khoom
Txoj kev ua haujlwm
Txhua zaus koj kov ib qho kev sib tham, lub microphone qhib lossis kaw.
- Lub microphone qhib yog tias koj tab tom kov lub rooj sib tham.
- Lub microphone raug muab tua thaum koj tsis kov lub rooj sib tham.
Hom kev ua haujlwm
SW. FUNCTION
- KOV: Lub microphone yuav raug muab tua yog tias koj tseem kov lub suab sib tham. Lub microphone tau qhib thaum koj tsis kov lub rooj sib tham.
- ON/OFF MOM: Txhua zaus koj kov ib qho kev sib tham, lub microphone qhib lossis kaw.
Tswj
- LOCAL: Lub microphone yog muted / unmuted siv ib tug hais lus hloov ntawm cov khoom. Cov lus qhia lamp kuj teeb ua ke nrog kev sib tham hloov ua haujlwm.
- NCO TSEG: Lub microphone ib txwm nyob. Cov lus qhia lamp Lub teeb ua ke nrog kev ua haujlwm ntawm cov kev sib tham sib tham thiab cov ntaub ntawv kev ua haujlwm raug xa mus rau cov cuab yeej tswj hwm sab nraud ntawm CLOSURE davhlau ya nyob twg. Cov cuab yeej tswj hwm sab nraud tswj kev muting/unmuting.
- LED REMOTE: Lub microphone ib txwm nyob twj ywm rau, thiab cov cuab yeej tswj hwm sab nraud tswj kev kaw / kaw thiab teeb lub suab lus qhia lamp. Tham txog kev hloov pauv cov ntaub ntawv raug xa mus rau lub cuab yeej tswj hwm sab nraud ntawm CLOSURE davhlau ya nyob twg.
Cov txheej txheem txuas
Kauj ruam 1:
Txuas cov zis terminals (RJ45 jacks) ntawm lub microphone cable rau cov RJ45 breakout cables los ntawm kev siv cov khoom lag luam STP cables. Txuas microphone tso zis terminals A thiab B rau RJ45 breakout cables A thiab B, feem.
Kauj ruam 2:
Txuas cov zis terminals ntawm RJ45 breakout cables mus rau ib lub cuab yeej uas muaj lub microphone input (balanced input) uas yog sib xws nrog phantom fais fab mov.
FAQ (Cov lus nug nquag nug)
- Q: Kuv puas tuaj yeem disassemble lossis hloov cov khoom?
A: Tsis yog, disassembling lossis hloov kho cov khoom yuav ua rau muaj kev ua haujlwm tsis zoo thiab tsis pom zoo. - Q: Kuv yuav xaiv cov xim ntawm cov lus qhia li cas lamp?
A: Koj tuaj yeem xaiv cov xim ntawm cov lus qhia lamp siv LED COLOR teeb rau hauv qab ntawm lub microphone.
Kev Tiv Thaiv Kev Nyab Xeeb
Txawm hais tias cov khoom no tau tsim los siv kom nyab xeeb, tsis siv nws kom raug yuav ua rau muaj xwm txheej. Txhawm rau kom muaj kev nyab xeeb, ua raws txhua qhov kev ceeb toom thiab kev ceeb toom thaum siv cov khoom.
Kev ceeb toom rau cov khoom
- Tsis txhob cuam tshuam cov khoom kom muaj kev cuam tshuam zoo kom tsis txhob ua haujlwm tsis zoo.
- Tsis txhob disassemble, hloov kho lossis sim kho cov khoom.
- Tsis txhob kov cov khoom nrog ob txhais tes ntub kom tsis txhob muaj hluav taws xob poob lossis raug mob.
- Tsis txhob khaws cov khoom nyob rau hauv lub hnub ncaj qha, ze rau cov khoom siv cua sov lossis hauv qhov chaw kub, ntub lossis plua plav.
- Tsis txhob muab cov khoom tso rau ntawm qhov chaw tsis ruaj khov kom tsis txhob raug mob lossis ua haujlwm tsis zoo vim kev poob lossis lwm yam.
Lus Ceeb Toom Txog Kev Siv
- Tsis txhob viav vias lub microphone los ntawm kev tuav lub cable los yog rub lub cable quab yuam. Ua li no yuav ua rau muaj kev cuam tshuam lossis kev puas tsuaj.
- Tsis txhob nruab ze ntawm lub tshuab cua txias lossis teeb pom kev zoo, vim tias ua li ntawd yuav ua rau muaj teeb meem.
- Tsis txhob cua lub cable nyob ib ncig ntawm lub khib los yog cia lub cable ua pinched.
- Nruab lub microphone ntawm lub tiaj tus, tsis muaj kev cuam tshuam kev teeb tsa. Nco ntsoov tias lub suab los tsis nyob hauv qab qhov chaw teeb tsa.
- Muab cov khoom tso rau ntawm qhov chaw (xws li lub rooj sib tham) ua ntej nws qhov kev kho tiav yuav ua rau muaj kev puas tsuaj rau qhov ua tiav.
Ntim cov ntsiab lus
- Microphone
- RJ45 breakout cable × 2
- Roj hmab isolator
- Kho txiv ntseej
- Lub rooj mount adapter
- Rooj mount adapter mounting ntsia hlau × 3
Cov npe thiab cov haujlwm
Sab saum toj
- Tham keyboards
Hloov ntawm mute thiab unmute. - Lub cev microphone
Sab
- Hais lus qhia lamp
Qhia qhov mute/unmute raws li xim ntawm qhov taw qhia lamp ntawd teeb.
Hauv qab
- SW. FUNCTION
Teem caij li cas cov lus sib tham ua haujlwm.Hom Txoj kev ua haujlwm KUB ON/OFF Txhua zaus koj kov ib qho kev sib tham, lub microphone qhib lossis kaw. MOM. ON
Lub microphone qhib yog tias koj tab tom kov lub rooj sib tham. Lub microphone raug muab tua thaum koj tsis kov lub rooj sib tham. MOM. OFF
Lub microphone yuav raug muab tua yog tias koj tseem kov lub suab sib tham. Lub microphone tau qhib thaum koj tsis kov lub rooj sib tham. - Tswj
Teem seb lub microphone puas yog muted/unmuted thiab seb tus hais lus taw qhia lamp yog lit los ntawm kev siv cov khoom lossis cov cuab yeej tswj xyuas sab nraud.Hom Kev ua haujlwm LOCAL
Lub microphone yog muted / unmuted siv ib tug hais lus hloov ntawm cov khoom. Cov lus qhia lamp kuj teeb ua ke nrog kev sib tham hloov ua haujlwm. REMOTE
Lub microphone ib txwm nyob. Cov lus qhia lamp Lub teeb ua ke nrog kev ua haujlwm ntawm cov kev sib tham sib tham thiab cov ntaub ntawv kev ua haujlwm raug xa mus rau cov cuab yeej tswj hwm sab nraud ntawm CLOSURE davhlau ya nyob twg. Cov cuab yeej tswj hwm sab nraud tswj kev muting/unmuting. LED REMOTE
Lub microphone ib txwm nyob twj ywm rau, thiab cov cuab yeej tswj hwm sab nraud tswj kev kaw / kaw thiab teeb lub suab lus qhia lamp. Tham txog kev hloov pauv cov ntaub ntawv raug xa mus rau lub cuab yeej tswj hwm sab nraud ntawm CLOSURE davhlau ya nyob twg. - LED COLOR
Koj tuaj yeem xaiv cov xim uas qhov kev hais lus qhia lamp teeb thaum muted/unmuted.
Txoj kev sib txuas
- Txuas cov zis terminals (RJ45 jacks) ntawm lub microphone cable rau cov RJ45 breakout cables los ntawm kev siv cov khoom lag luam STP cables.
- Txuas microphone tso zis terminals A thiab B rau RJ45 breakout cables A thiab B, feem.
- Microphone tso zis davhlau ya nyob twg A
- Kev lag luam muaj STP cable (MIC 1 txog MIC 3)
- RJ45 breakout cable A
- Microphone tso zis davhlau ya nyob twg B
- Kev lag luam muaj STP cable (LED tswj / CLOSURE tswj)
- RJ45 breakout cable B
- Txuas microphone tso zis terminals A thiab B rau RJ45 breakout cables A thiab B, feem.
- Txuas cov zis terminals ntawm RJ45 breakout cables mus rau ib lub cuab yeej uas muaj lub microphone input (balanced input) uas yog sib xws nrog phantom fais fab mov.
- MIC 1
- MIC 2
- MIC 3
- Kev tswj hwm LED
- CLOSURE tswj
- ATDM series DIGITAL SMARTMIXER ™
- Third-tog mixer
- Cov khoom xav tau 20 txog 52 V DC phantom fais fab mov rau kev ua haujlwm.
- Cov tso zis connectors yog Euroblock connectors nrog polarity raws li qhia nyob rau hauv lub "Wiring table".
Hlau rooj
- Lub microphone tso zis yog tsawg impedance (Lo-Z), sib npaug hom. Cov teeb liab tawm ntawm txhua khub ntawm Euroblock connectors ntawm RJ45 breakout cables. Suab grounding yog tiav nrog ib tug shielded kev twb kev txuas. Cov zis ntawm txhua Euroblock connector yog raws li qhia nyob rau hauv tus pin txoj hauj lwm.
- MIC 1 yog "O" (omnidirectional) thiab MIC 2 yog "L" (bidirectional), nrog rau ob qho tib si nyob ntawm 240 ° kab rov tav. MIC 3 yog "R" (bidirectional), thiab nyob ntawm 120 ° kab rov tav. Cov no tau ua ke los tsim cov qauv kev taw qhia hauv txhua qhov kev xav tau.
- Tus PIN ib ntus ntawm cov zis terminals yog raws li hauv qab no.
TSUAS A.
Cov PINs thiab kev ua haujlwm ntawm RJ45 connectors thiab xim ntawm RJ45 breakout cables yog raws li nram no.
| Pin No. / Function | Cable xim |
| PIN 1 / MIC 2 L (+) | Xim av |
| PIN 2 / MIC 2 L (-) | Txiv kab ntxwv |
| PIN 3 / MIC 3 R (+) | Ntsuab |
| PIN 4 / MIC 1 O (-) | Dawb |
| PIN 5 / MIC 1 O (+) | Liab |
| PIN 6 / MIC 3 R (-) | Xiav |
| PIN 7 / GND | Dub |
| PIN 8 / GND | Dub |
Tawm B
Tus lej pin thiab kev ua haujlwm ntawm RJ45 connectors thiab xim ntawm RJ45 breakout cables yog raws li nram no.
| Pin No. / Function | Cable xim |
| PIN 1 / Blank | – |
| PIN 2 / Blank | – |
| PIN 3 / LED | Ntsuab |
| PIN 4 / Blank | – |
| PIN 5 / CLOSURE | Liab |
| PIN 6 / Blank | – |
| PIN 7 / GND | Dub |
| PIN 8 / GND | Dub |
Pin assignment
MIC 1
- O+
- O-
- GND
MIC 2
- L+
- L-
- GND
MIC 3
- R+
- R-
- GND
Kev tswj hwm LED
- GND
- LED (ntsuab)
CLOSURE tswj
- GND
- CLOSURE (liab)
Cov txheej txheem installation
Yuav ua li cas rau nruab cov khoom
Cov khoom yog mounted los ntawm drilling ib lub qhov nyob rau hauv ib lub rooj thiab siv lub rooj mount adapter kom ruaj ntseg rau lub rooj.
- Txiav txim siab qhov twg koj xav mount cov khoom thiab laum ib lub qhov nyob rau hauv lub rooj ntawm qhov chaw ntawd.
- Yuav tsum muaj 30 hli (1.2 ") txoj kab uas hla. Tsis tas li ntawd, qhov siab tshaj plaws thickness ntawm lub rooj yog 30 hli (1.2 ").
- Yuav tsum muaj 30 hli (1.2 ") txoj kab uas hla. Tsis tas li ntawd, qhov siab tshaj plaws thickness ntawm lub rooj yog 30 hli (1.2 ").
- Tshem cov cable kho screws nyob hauv qab ntawm lub microphone.
- Khaws thiab tsis txhob poob qhov tshem tawm cable kho screws. Koj yuav xav tau lawv yog tias koj puas tau txiav txim siab siv cov khoom tsis tau txuas rau lub rooj.
- Txuas lub rooj mount adapter rau hauv qab ntawm lub microphone.
- Txuas lub rooj mount adapter nrog lub rooj mount adapter mounting screws.
- Txuas lub rooj mount adapter kom lub cable khiav nrog lub rooj mount adapter. Tsis txhob hla lub cable los ntawm sab hauv ntawm lub rooj mount adapter.
- Dhau qhov kawg ntawm lub cable los ntawm lub qhov nyob rau hauv lub rooj thiab ces dhau lub rooj mount adapter los ntawm lub qhov. Tom ntej no, hla cov roj hmab cais tawm nyob ib ncig ntawm lub rooj mount adapter thiab ntxig rau hauv lub qhov ntawm lub rooj, xyuas kom meej tias cov cable khiav raws qhov indentation ntawm cov roj hmab cais.
- Lub rooj mount adapter
- Kab
- Roj hmab isolator
- Kho qhov taw qhia ntawm lub microphone.
- Kho qhov taw qhia ntawm lub microphone kom lub Audio-Technica logo tig mus rau pem hauv ntej thaum siv.
- Tighten lub txiv ntseej kom ruaj ntseg lub microphone.
- Kho txiv ntseej
Mounting tsis siv lub rooj mount adapter
Thaum mounted thiab ntsia tsis siv lub rooj mount adapter thiab tsis drilling ib tug 30 hli (1.2 ") txoj kab uas hla lub qhov nyob rau hauv lub rooj, lub microphone yog ruaj ntseg siv ob lub qhov ntsia hlau nyob rau hauv daim duab hauv qab no.
- Tshem cov hlua kho cov ntsia hlau rau hauv qab ntawm lub microphone thiab siv cov khoom muag muag. Cov ntsia hlau loj yuav tsum yog M3 P = 0.5 thiab ntsia hlau ntev yuav tsum tsis pub tshaj 7 hli (0.28 ") los ntawm hauv qab ntawm lub taub hau mus rau qhov kawg ntawm cov ntsia hlau.
- Screws (muaj kev lag luam)
- Ntsia hlau qhov
Kev pab txhawb nqa suab
Rau 360 ° kev pab cuam
- Tsim plaub tus qauv hypercardioid (ib txwm) virtual kev taw qhia ntawm 0 °, 90 °, 180 °, thiab 270 °.
- Qhov kev teeb tsa no yog qhov zoo tagnrho rau kev sau omnidirectional ntawm kev sib tham ntawm plaub tus neeg zaum ntawm ib lub rooj.
Thaum txuas mus rau ATDM series DIGITAL SMARTMIXER ™, hom kev tawm tswv yim rau kev tawm tswv yim 1-3 tau teeb tsa rau "Virtual Mic" los ntawm lub neej ntawd, txawm li cas los xij, yog tias lub suab khaws yuav tsum muab faib ua plaub lossis ntau ntu raws li qhia hauv qhov ex.ample, teeb tsa hom tswv yim rau "Virtual Mic" rau cov tswv yim channel 4 thiab txuas ntxiv mus. Rau cov lus qhia ntxaws txog kev khiav hauj lwm, xa mus rau ATDM series DIGITAL SMARTMIXER™ cov neeg siv phau ntawv.
Rau 300 ° kev pab cuam
- Tsim peb lub cardioid (Wide) cov qauv kev coj ua virtual ntawm 0 °, 90 °, thiab 180 °.
- Qhov kev teeb tsa no yog qhov zoo tshaj plaws rau kev sib tham ntawm peb tus neeg zaum kawg ntawm lub rooj.
Thaum txhim kho 2 lossis ntau dua ntawm cov khoom no
Peb pom zoo kom cov microphones muab tso rau tsawg kawg yog 1.7 m (5.6′) (rau qhov kev teeb tsa hypercardioid (ib txwm)) sib nrug kom cov kev pabcuam ntawm txhua lub microphone tsis sib tshooj.
Kev teeb tsa sib tov
Siv nrog ATDM series DIGITAL SMARTMIXER ™
Lub firmware ntawm ATDM series DIGITAL SMARTMIXER ™ yuav tsum hloov kho ua ntej siv.
- Pib lub Web Chaw taws teeb, xaiv "Administrator" thiab nkag mus.
- Rau kev teeb tsa thiab kev ua haujlwm tom ntej, xa mus rau ATDM series DIGITAL SMARTMIXER ™ Tus Neeg Siv Phau Ntawv.
Thaum siv lwm cov mixers
Thaum siv cov khoom siv nrog cov khoom sib tov uas tsis yog ATDM series DIGITAL SMARTMIXER ™, koj tuaj yeem kho cov zis ntawm txhua qhov raws li cov hauv qab no sib xyaw matrix los tswj cov kev taw qhia.
Thaum lub mixing matrix yog "ib txwm"
|
Kev taw qhia nqa |
O | L | R | |||
| φ | Qib | φ | Qib | φ | Qib | |
| 0° Nws | + | -4 dB | – | 0dB ua | – | 0dB ua |
| 30° Nws | + | -4 dB | – | +1.2dB | – | -4.8 dB |
| 60° Nws | + | -4 dB | – | 0dB ua | - ∞ | |
| 90° Nws | + | -4 dB | – | -4.8 dB | + | -4.8 dB |
| 120° Nws | + | -4 dB | - ∞ | + | 0dB ua | |
| 150° Nws | + | -4 dB | + | -4.8 dB | + | +1.2dB |
| 180° Nws | + | -4 dB | + | 0dB ua | + | 0dB ua |
| 210° Nws | + | -4 dB | + | +1.2dB | + | -4.8 dB |
| 240° Nws | + | -4 dB | + | 0dB ua | - ∞ | |
| 270° Nws | + | -4 dB | + | -4.8 dB | – | -4.8 dB |
| 300° Nws | + | -4 dB | - ∞ | – | 0dB ua | |
| 330° Nws | + | -4 dB | – | -4.8 dB | – | +1.2dB |
Thaum lub mixing matrix yog "Wide"
|
Kev taw qhia nqa |
O | L | R | |||
| φ | Qib | φ | Qib | φ | Qib | |
| 0° Nws | + | 0dB ua | – | 0dB ua | – | 0dB ua |
| 30° Nws | + | 0dB ua | – | +1.2dB | – | -4.8 dB |
| 60° Nws | + | 0dB ua | – | 0dB ua | - ∞ | |
| 90° Nws | + | 0dB ua | – | -4.8 dB | + | -4.8 dB |
| 120° Nws | + | 0dB ua | - ∞ | + | 0dB ua | |
| 150° Nws | + | 0dB ua | + | -4.8 dB | + | +1.2dB |
| 180° Nws | + | 0dB ua | + | 0dB ua | + | 0dB ua |
| 210° Nws | + | 0dB ua | + | +1.2dB | + | -4.8 dB |
| 240° Nws | + | 0dB ua | + | 0dB ua | - ∞ | |
| 270° Nws | + | 0dB ua | + | -4.8 dB | – | -4.8 dB |
| 300° Nws | + | 0dB ua | - ∞ | – | 0dB ua | |
| 330° Nws | + | 0dB ua | – | -4.8 dB | – | +1.2dB |
Siv Cov Khoom Siv
Switching ntawm mute thiab unmute
- Kov ib qho kev sib tham ib zaug.
- Txhua zaus koj kov ib qho kev sib tham, lub microphone hloov ntawm lub suab / tsis mloog.
- Koj tuaj yeem hloov qhov chaw ua haujlwm tsis zoo nrog "SW. FUNCTION” hloov. Kom paub meej, saib "Hloov chaw thiab ua haujlwm".
Cov lus qhia lamp teeb.
- Tham keyboards
- Hais lus qhia lamp
Koj tuaj yeem hloov xim LED ntawm qhov taw qhia tham lamp nrog rau "MIC ON" thiab "MIC OFF" dials hauv qab "LED COLOR." Yog xav paub ntxiv, saib "Setting LED colours".
Hloov chaw thiab ua haujlwm
- SW. FUNCTION
- Tswj
- LED COLOR
- Tiv tauj kaw qhov xwm txheej (microphone ua haujlwm raws li txoj cai)
Teeb tsa cov xim LED
Koj tuaj yeem xaiv cov xim LED ntawm cov lus qhia lamp uas teeb thaum lub microphone qhib / tawm.
- Tig lub "MIC OFF" / "MIC ON" hu rau tus naj npawb ntawm cov xim koj xav teem rau lub mic rau / tawm.
| Tus lej | LED xim |
| Δ | Tsis yog lit |
| 1 | Liab |
| 2 | Ntsuab |
| 3 | Daj |
| 4 | Xiav |
| 5 | Magenta |
| 6 | Cyan |
| 7 | Dawb |
Yog CONTROL yog "LOCAL"
Koj tuaj yeem teeb tsa hom kev ua haujlwm rau ib qho ntawm peb hom: “KOV ON/OFF” (kov-on/kov-off), “MOM. ON” (kov-rau-hais lus), lossis “MOM. OFF” (kov-rau-mute).
Yog SW. FUNCTION yog "KOV ON/OFF" (kov-on/kov-off)
- Txhua zaus koj kov ib qho kev sib tham, lub microphone qhib thiab tawm.
- Thaum lub microphone qhib, LED teeb nyob rau hauv cov xim xaiv nyob rau hauv "MIC ON," thiab thaum nws muab tua, LED teeb nyob rau hauv cov xim xaiv nyob rau hauv "MIC OFF."
Yog SW. FUNCTION yog “MOM. ON” (kov-rau-hais lus)
- Lub microphone qhib yog tias koj tab tom kov lub rooj sib tham. Lub microphone raug muab tua thaum koj tsis kov lub rooj sib tham.
- Thaum lub microphone qhib, LED teeb nyob rau hauv cov xim xaiv nyob rau hauv "MIC ON," thiab thaum nws muab tua, LED teeb nyob rau hauv cov xim xaiv nyob rau hauv "MIC OFF."
Yog SW. FUNCTION yog “MOM. OFF” (kov-rau-mute)
- Lub microphone yuav raug muab tua yog tias koj tseem kov lub suab sib tham. Lub microphone tau qhib thaum koj tsis kov lub rooj sib tham.
- Thaum lub microphone raug kaw, LED teeb hauv cov xim xaiv hauv qab "MIC OFF," thiab thaum nws qhib, LED teeb hauv cov xim xaiv hauv qab "MIC ON."
Yog CONTROL yog "REMOTE"
- Koj tuaj yeem teeb tsa hom kev ua haujlwm rau ib qho ntawm peb hom: “KOV ON/OFF” (kov-on/kov-off), “MOM. ON” (kov-rau-hais lus), lossis “MOM. OFF” (kov-rau-mute). Txawm li cas los xij, lub microphone tseem nyob hauv ib qho ntawm cov qauv no, thiab tsuas yog lub teeb pom kev ntawm cov lus qhia lamp hloov.
- Lub microphone yog switched rau thiab tawm los ntawm lub sab nraud tswj ntaus ntawv.
Yog SW. FUNCTION yog "KOV ON/OFF" (kov-on/kov-off)
Txhua zaus koj kov ib qho kev sib tham, qhov taw qhia tham lamp uas qhia seb lub microphone yog qhib / tawm keyboards.
Yog SW. FUNCTION yog “MOM. ON” (kov-rau-hais lus)
Cov lus qhia lamp qhia tias lub microphone nyob rau ntawm lub teeb thaum koj kov ib qho kev sib tham thiab qhov taw qhia tham lamp qhia tau hais tias lub microphone yuav tsis muaj teeb pom kev zoo thaum koj tsis txhob kov lub rooj sib tham.
Yog SW. FUNCTION yog “MOM. OFF” (kov-rau-mute)
Cov lus qhia lamp Qhov no qhia tau hais tias lub microphone tsis muaj teeb pom kev zoo thaum koj kov lub rooj sib tham. Cov lus qhia lamp Qhov ntawd qhia tau hais tias lub microphone nyob rau ntawm lub teeb thaum koj nres kov lub rooj sib tham.
Yog tias CONTROL yog "LED REMOTE"
- Koj tuaj yeem teeb tsa hom kev ua haujlwm rau ib qho ntawm peb hom: “KOV ON/OFF” (kov-on/kov-off), “MOM. ON” (kov-rau-hais lus), lossis “MOM. OFF” (kov-rau-mute). Txawm li cas los xij, lub microphone tseem nyob hauv ib qho ntawm cov qauv no, thiab cov teeb pom kev ntawm cov lus qhia lamp tsis hloov.
- Lub microphone tau qhib thiab tawm thiab lub teeb pom kev ntawm cov lus qhia lamp yog hloov los ntawm ib qho khoom siv tswj sab nraud.
Yog SW. FUNCTION yog "KOV ON/OFF" (kov-on/kov-off)
Lub microphone tsis hloov / tawm txawm tias koj kov lub rooj sib tham. Lub teeb pom kev ntawm cov lus qhia lamp tsis txuas ncaj qha rau kev ua haujlwm ntawm lub microphone lub cev. Nws tsuas yog tswj los ntawm ib qho khoom siv sab nraud.
Yog SW. FUNCTION yog “MOM. ON” (kov-rau-hais lus)
Lub microphone tsis hloov / tawm thaum koj tab tom kov lub rooj sib tham lossis thaum koj tsis kov lub rooj sib tham. Lub teeb pom kev ntawm cov lus qhia lamp tsis txuas ncaj qha rau kev ua haujlwm ntawm lub microphone lub cev. Nws tsuas yog tswj los ntawm ib qho khoom siv sab nraud.
Yog SW. FUNCTION yog “MOM. OFF” (kov-rau-mute)
Lub microphone tsis hloov / tawm thaum koj tab tom kov lub rooj sib tham lossis thaum koj tsis kov lub rooj sib tham. Lub teeb pom kev ntawm cov lus qhia lamp tsis txuas ncaj qha rau kev ua haujlwm ntawm lub microphone lub cev. Nws tsuas yog tswj los ntawm ib qho khoom siv sab nraud.
Ntxuav
Nkag mus rau hauv tus cwj pwm uas tsis tu ncua ntxuav cov khoom kom ntseeg tau tias nws yuav nyob rau ntev. Tsis txhob siv dej cawv, pleev xim rau nyias nyias, lossis lwm yam kuab tshuaj ua kom huv rau lub hom phiaj.
- So cov av tawm ntawm cov khoom nrog ib daim ntaub qhuav.
- Yog hais tias cov cables ua qias neeg vim hws, thiab lwm yam, so lawv nrog ib daim ntaub qhuav tam sim ntawd tom qab siv. Kev tsis huv ntawm cov cables yuav ua rau lawv deteriorate thiab harden lub sij hawm, uas ua rau lub malfunction.
- Yog tias cov khoom lag luam yuav tsis siv rau ncua sijhawm, khaws cia rau hauv qhov chaw muaj cua zoo uas tsis muaj qhov kub thiab av noo.
Kev daws teeb meem
Lub microphone tsis muaj suab nrov
- Xyuas kom tseeb tias cov zis terminals A thiab B txuas nrog rau qhov tseeb qhov txuas.
- Xyuas kom tseeb tias cov kab hluav taws xob tawg A thiab B txuas nrog qhov tseeb qhov txuas.
- Xyuas kom tseeb tias cov kab txuas txuas txuas tau zoo.
- Xyuas kom tseeb tias cov cuab yeej txuas txuas tau muab lub zog phantom kom zoo.
- Xyuas kom tseeb tias cov cuab yeej tswj hwm sab nraud tsis raug teeb tsa kom tsis txhob kaw.
Cov lus qhia lamp tsis kaj
- Xyuas kom tseeb tias qhov "MIC ON" / "MIC OFF" hu rau "LED COLOR" tsis tau teem rau "Δ ” (tsis muaj teeb pom kev zoo).
- Xyuas kom tseeb tias cov cuab yeej txuas txuas yog muab lub zog phantom kom zoo thiab qhov voltage yog lawm.
- Xyuas kom tseeb tias cov cuab yeej tswj sab nraud tsis tau teeb tsa los tua cov lus qhia lamp.
Qhov ntev
Microphone
Lub rooj mount adapter
Specifications
| Element | Tsau-them rov qab phaj, tas mus li polarized condenser |
| Polar qauv | Adjustability: Cardioid (Wide) / Hypercardioid (ib txwm) |
| Zaus teb | 20 rau 15,000 Hz |
| Qhib Circuit Court rhiab heev | Dav: -33 dBV (22.4 mV) (0 dB = 1 V / Pa, 1 kHz)
Lub cev muaj zog: -35 dBV (17.8 mV) (0 dB = 1 V / Pa, 1 kHz) |
| Impedance | 100 hmo |
| Tso suab txhawb ntau qib | Dav / Ib txwm: 136.5 dB SPL (1 kHz ntawm 1% THD) |
| Teeb liab-rau-nrawm piv | Dav: 68.5 dB (1 kHz ntawm 1 Pa, A-hnyav)
Ib txwm: 67.5 dB (1 kHz ntawm 1 Pa, A-hnyav) |
| Hloov | SW. FUNCTION: KOV ON/OFF, niam. ON, MAM. OFF CONTROL: LOCAL, REMOTE, LED REMOTE |
| Phantom zog yuav tsum | 20 txog 52 V DC, 19.8 mA (tag nrho cov channel tag nrho) |
| Sib cuag kaw | Kaw input voltage: -0.5 txog 5.5V Lub zog tso cai siab tshaj plaws: 200 mW On-resistance: 100 ohms |
| Kev tswj hwm LED | Active siab (+ 5 V DC) TTL tshaj Active low voltage: 1.2V lossis qis dua
Lub zog tso zis siab tshaj plaws: -0.5 txog 5.5V Lub zog tso cai siab tshaj plaws: 200 mW |
| Qhov hnyav | Microphone: 364g (13 oz) |
| Qhov Loj (microphone) | Qhov siab tshaj plaws (lub cev): 88mm (3.5 ")
Qhov siab: 22mm (0.87 ") |
| Output connector | Euroblock txuas |
| suav nrog accessories | RJ45 breakout cable × 2, rooj mount adapter, kho txiv ntseej, roj hmab cais, rooj mount adapter mounting ntsia hlau × 3 |
- 1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
- Rau kev txhim kho cov khoom, cov khoom yuav raug hloov kho yam tsis muaj ntawv ceeb toom.
Qauv txawv / Qhov tshos teb
Hypercardioid (ib txwm)
Polar qauv
Zaus teb
Cardioid (Wide)
Polar qauv
Zaus teb
Cov cim lag luam
SMARTMIXER ™ yog lub cim lag luam lossis sau npe ua lag luam ntawm Audio-Technica Corporation.
Suab-Technica Corporation
2-46-1 Nishi-Naruse, Machida, Tokyo 194-8666, Nyij Pooj audio-technica.com.
© 2023 Audio-Technica Corporation
Ntiaj teb no Support Contact: www.at-globalsupport.com.
Cov ntaub ntawv / Cov ntaub ntawv
 |
audio-technica ES964 Ciam Teb Microphone Array [ua pdf] Tus neeg siv phau ntawv ES964 Ciam Microphone Array, ES964, Ciam Teb Microphone Array, Microphone Array |
 |
audio-technica ES964 Ciam Teb Microphone Array [ua pdf] Tus neeg siv phau ntawv ES964 Ciam Teb Microphone Array, ES964, Ciam Teb Microphone Array, Microphone Array, Array |
 |
audio-technica ES964 Ciam Teb Microphone Array [ua pdf] Tus neeg siv phau ntawv ES964 Ciam Microphone Array, ES964, Ciam Teb Microphone Array, Microphone Array |