AXIOMATIC AX020710 Single Output Valve Controller Boky Torolàlana ho an'ny mpampiasa
TAPITRAVIEW OF CONTROLLER
Description of Universal Input to Proportional Valve Output NFC Controller
Ity boky torolalana ho an'ny mpampiasa ity dia mamaritra ny maritrano sy ny fiasan'ny Universal Input to Single Output Valve Controller miaraka amin'ny Near Field Communication (NFC). Ny fidirana rehetra sy ny blocs fampiasa lojika ao amin'ilay vondrona dia tsy miankina amin'ny tsirairay fa azo amboarina hifaneraserana.
All parameters are configurable using the mobile E-Write NFC configuration tool available on the Google Play Store and Apple App Store. E-Write NFC allows the user to configure the module as well as to assign each of the AX020710 controllers a unique alias to easily distinguish between the controllers within a large system.
Ny teknolojian'ny NFC an'ny mpanara-maso dia manome ny mpampiasa ny fahafahana manitsy ny fanaraha-maso tsy mila ny fampandehanana. Ity endri-javatra ity dia tena ilaina amin'ny tranga, ohatraample, izay ametrahana ny fitaovana ao anaty rafitra mitaky fanerena ary tsy mila mitokana amin'ny rafitra ary mandehana ety ivelany mba hanatanterahana ny fametahana; fa ny fitaovana dia azo amboarina miaraka amin'ny rafitra maty.
The controller (1IN-1OUT-NFC) is designed for versatile control of a universal input and a proportional valve output. The hardware design allows for the controller to have a wide range of input and output types. The control algorithms/function blocks allow the user to configure the controller for a wide range of applications without the need for custom firmware. The various function blocks supported by the 1IN-1OUT-NFC are outlined in the following sectioris.
Ny fidirana manerantany dia azo amboarina mba hamakiana famantarana analoga: Voltage, Current, ary Resistance ary koa ny famantarana nomerika: Frequency/RPM, PWM, ary karazana nomerika. Ny fampidirana dia voafaritra amin'ny antsipiriany kokoa ao amin'ny fizarana 1.2.
Toy izany koa, ny vokatra dia azo amboarina amin'ny karazana samihafa: Proportional Current, Voltage, PWM, Hotshot Digital Current ary Digital (ON/OFF). Ny fivoahana tsirairay dia misy mpamily tapa-tetezana avo lenta afaka mipoitra hatramin'ny 3Amps miaraka amin'ny fanakatonana fitaovana amin'ny 4Amps. Ny vokatra dia voafaritra amin'ny antsipiriany kokoa ao amin'ny fizarana 1.4.
Universal Input Function Block
Ny fanaraha-maso dia misy fampidirana tokana tokana ary azo amboarina mba handrefesana voltage, ankehitriny, matetika / RPM, pulse width modulation (PWM) ary famantarana nomerika. Ny zana-pizarana etsy ambany dia manazava ny endri-javatra/fampiasan'ny fampidirana universal.
Karazam-pandrefesana fampidirana
Table 1 lists the supported input types by the controller. The Input Type parameter provides a dropdown list with the input types described in Table 1. Changing the Input Type affects other parameters within the same parameter group such as Minimum/Maximum Error/Range by refreshing them to new input type and thus should be changed first
Torolàlana ho an'ny mpampiasa UMAX020710 Version 1.2
| 0 | tsy NAMPIASAINA |
| 1 | BOKYtage -5V ny +5V |
| 2 | BOKYtage -10V ny +10V |
| 3 | amin'izao fotoana izao 0 ny 20mA |
| 4 | hatetika 0.5 ny 50Hz |
| 5 | hatetika 10Hz ny 1kHz |
| 6 | hatetika 100Hz ny 10kHz |
| 7 | PWM IVA hatetika (<1kHz) |
| 8 | PWM Avo hatetika (>100Hz) |
| 9 | Hafanàm-po (Normal) |
| 10 | Hafanàm-po (Inverse) |
| 11 | Hafanàm-po (Latched) |
Tabilao 1 - Safidin'ny karazana sensor-input universal
Ampidirina mivantana amin'ny mpanova 12-bit analog-to-digital (ADC) ao amin'ny microcontroller ny fampidirana analogue rehetra. VoltagNy fampidiran-dresaka dia impedance avo lenta raha ny fampidirana ankehitriny dia mampiasa resistor 2490 handrefesana ny famantarana.
Frequency/RPM, and Pulse Width Modulated (PWM) Karazana fampidirana are connected to the microcontroller timers. Pulses isaky ny Revolisiona parameter is only taken into consideration when the Karazana fampidirana selected is one of the frequency types as per Table 1. When Pulses per Revolution parameter is set to 0, the measurements taken will be in units of [Hz]. If Pulses per Revolution parameter is set to higher than 0, the measurements taken will be in units of [RPM].
Hafanàm-po Karazana fampidirana offers three modes: Normal, Inverse, and Latched. The measurements taken with digital input types are 1 (ON) or 0 (OFF).
1.2.2. Pullup / Pulldown Resistor Options
amin'ny Karazana fidirana: Frequency / RPM, PWM, Digital, ny mpampiasa dia manana safidy telo (3) samihafa misintona / misintona safidy araka ny voatanisa ao amin'ny tabilao 2.
| 0 | tsy NAMPIASAINA |
| 1 | 10kΩ Pullup |
| 2 | 10kΩ Pulldown |
Table 2 - Safidy Pullup / Pulldown Resistor
These options can be enabled or disabled by adjust the parameter Pullup/Pulldown Resistor in
E-Write NFC
Minimum and Maximum Ranges
ny Saranga farany ambany SY Faritra faratampony parameters are used to create the overall useful range of the inputs. For example, raha Saranga farany ambany is set to 0.5V and Faritra faratampony is set to 4.5V, the overall useful range (0-100%) is between 0.5V to 4.5V. Anything below the Minimum Range will saturate at Minimum Range. Similarly, anything above the Faritra faratampony will saturate at Maximum Range.
Minimum and Maximum Errors
ny Error kely indrindra SY Fahadisoana ambony indrindra parameters are used when Famantarana lesoka is True. When Famantarana lesoka is enabled, any input measurement at or below/above the Minimum/Maximum Error parameters will create an input fault. When the input fault occurs, if the input is commanding the output, the output will shut off. The fault will be cleared as soon as the measured input is within Minimum Error+ or Maximum Error- the Error Hysteresis value. On the contrary, when Famantarana lesoka dia napetraka amin'ny FALSE, no fault will occur and the Error kely indrindra SY Fahadisoana ambony indrindra will not be taken into consideration.
Digital Debounce Time
Ity mari-pamantarana ity dia ampiasaina amin'ny karazana fampidirana nomerika (ara-dalàna), nomerika (mifanohitra) ary nomerika (mifatotra). Fotoana hiandrasan'ny mpanara-maso ny fanodinana sy ny fampielezana ny toetry ny fampidirana rehefa misy sisiny iray. Izany dia manampy amin'ny fanivanana ny bokotra na ny switch mitabataba mba hamakiana famantarana/fanjakana madio.
Input Filter Types
Ny karazana fampidirana rehetra afa-tsy ny nomerika (ara-dalàna), nomerika (inverse), nomerika (mipetaka) dia azo sivana amin'ny alàlan'ny masontsivana karazana sivana sy sivana Constant. Misy karazana sivana telo (3) azo jerena ao amin'ny tabilao 3.
| 0 | tsy NAMPIASAINA |
| 1 | Mandroso Average |
| 2 | mamerina Average |
Tabilao 3 - Karazana fanivanana fampidirana
Ny safidy sivana voalohany Tsy misy sivana, tsy manome sivana ny angona voarefy. Noho izany, ny angon-drakitra voarefy dia hampiasaina mivantana amin'ny sakana rehetra mampiasa an'io data io.
The second option, Moving Average, applies the ‘Equation 1’ below to measured input data, where Value N represents the current input measured data, while ValueN-1 represents the previous filtered data. The Filter Constant is the Input Filter Constant parameter.
Fizarana 1 – Fampandehanana sivana salantsalany:
The third option, Repeating Average, applies the ‘Equation 2’ below to measured input data, where N is the value of Input Filter Constant parameter. The filtered input, Value, is the average of all input measurements taken in N (Input Filter Constant) number of reads. When the average istaken, the filtered input will remain until the next average is ready.
Fizarana 2 - Famerenana ny salan'isan'ny famindrana:
Internal Function Block Control Sources
Ny mpanara-maso 1IN-1OUT-NFC dia mamela ny loharanon'ny sakana fampiasa anatiny ho voafantina avy amin'ny lisitry ny sakana lojika tohanan'ny mpanara-maso. Vokatr'izany, ny vokatra rehetra avy amin'ny sakana iray dia azo fidina ho loharanon'ny fanaraha-maso ho an'ny iray hafa. Ny lisitry ny loharanon'ny fanaraha-maso dia aseho amin'ny tabilao 4.
| sarobidy | HEVITRY |
| 0 | PO Source tsy NAMPIASAINA |
| 2 | rehetra izao fahan'ny norefesiny |
| 5 | Hitady LOHA asa andian-tsoratra |
Table 4 - Safidy Loharano fanaraha-maso
Ho fanampin'ny loharano iray, ny fanaraha-maso tsirairay dia manana isa izay mifanaraka amin'ny sub-index amin'ny sakana fiasa resahina. Ny tabilao 5 dia manoritra ny faritra tohana ho an'ny zavatra isa, arakaraka ny loharano nofantenana.
| PO Source | PO Source isa |
| Control Source Not Used (Ignored) | [0] |
| rehetra izao fahan'ny norefesiny | [1…1] |
| Lookup Table Function Block | [1…1] |
Tabilao 5 - Safidy laharana loharanon'ny fanaraha-maso
Sary 1 – Loharano Analog amin'ny fampidirana nomerika
Output Drive Function Blocks
Ny controller dia ahitana output proportional tokana. Ny Output dia misy mpamily tapa-tetezana avo lenta izay afaka mitondra hatramin'ny 3Amps. Ampifandraisina amin'ny periferika famerana microcontroller tsy miankina ny vokatra ary azo amboarina tsy miankina amin'ny 1Hz ka hatramin'ny 25kHz.
Ny mari-pamantarana karazana Output dia mamaritra ny karazana famantarana avoakan'ny vokatra. Ny fanovana an'io mari-pamantarana io dia mahatonga ny masontsivana hafa ao amin'ny vondrona havaozina hifanaraka amin'ny karazana voafantina. Noho izany antony izany, ny mari-pamantarana voalohany tokony hovana alohan'ny hanitsiana ny masontsivana hafa dia ny mari-pamantarana karazana Output. Ireo karazana vokatra tohanan'ny mpanara-maso dia voatanisa ao amin'ny tabilao 6 etsy ambany:
| 0 | sembana |
| 1 | Proportional Current |
| 2 | Digital Hotshot |
| 3 | Proportional Voltage (0-Vps) |
| 4 | PWM Duty Cycle |
| 5 | Digital (0-Vps) |
Fizarana 3 – Fikajiana slope andalana
Ny tabilao fitadiavana dia ampiasaina hanomezana valinteny mivoaka hatramin'ny tehezan-tendrombohitra 5. Misy karazany roa ny valin'ny tabilao fitadiavana mifototra amin'ny valin'ny tabilao fitadiavana: Ny valin'ny angona sy ny valin'ny fotoana Fizarana 1.5.2 hatramin'ny 1.5.6 dia hamaritra ireo karazana valiny roa ireo amin'ny antsipiriany bebe kokoa.
Raha ny karazana X-Axis = Data Response, ny teboka eo amin'ny X-Axis dia maneho ny angon-drakitra momba ny loharanon'ny fanaraha-maso. Ireo sanda ireo dia amin'ny isan-jatotage (%) ary maneho ny isan-jatotage amin'ny Loharano Fanaraha-maso nofantenana.
0% <= X_{0} <= X_{0} <= X_{1} <= X_{1} <= X_{2} <= X_{3} <= X_{4} <= X_{5} <= (100%)%
Ny Y-Axis dia tsy misy teritery amin'ny angon-drakitra asehony. Midika izany fa azo apetraka mora foana ny valiny, na mitombo/mihena na valiny hafa.
Amin'ny alàlan'ny default, ny tabilao fitadiavana dia kilemaina (Lookup Fanaraha-maso ny Loharano fanaraha-maso dia napetraka amin'ny Control Not Used). Ny tabilao fitadiavana dia azo ampiasaina hamoronana ilay pro valiny irinafiles. Rehefa ampiasaina ho Loharanon'ny Fanaraha-maso ny Fampidirana Maneran-tany, dia ho izay ampidiran'ny mpampiasa amin'ny mari-pamantarana Y-Values ny vokatra avy amin'ny tabilao fitadiavana.
X-Axis, Time Response
Torolàlana fametrahana
Dimensions sy Pinout
Ny Controller 1IN-1OUT-NFC dia biraon'ny PCB mivondrona miaraka amin'ny coating conformal matanjaka ho fiarovana ny singa amin'ny vibration sy ny singa hafa. Ny fivoriambe AX020710 dia mitondra naoty IP00, raha ny fivoriambe AX020710-1.5M sy AX020710-PG9 kosa dia manana naoty IP67.
| TABLET WIRING | |
| PIN# | fifandraisana |
| 1 | fahefana |
| 2 | Hery + |
| 3 | SOLENOID - |
| 4 | SOLENOID + |
| 5 | INPUT + |
| 6 | INPUT GND |
| 7 | AUXILIARY OUTPUT |
| 8 | +5V REFERENCE |
Figure 4 – AX020710 Board Dimensions
| TABLET WIRING | ||
| LOKON'NY WIRING | Vidin'ny AWG | fifandraisana |
| BLACK | 18 | fahefana |
| MENA | 18 | POWER + |
| ORANGE/BLACK STRIPE | 18 | SOLENOID- |
| ORANGE/RED STRIPE | 18 | SOLENOID + |
| MAVO | 24 | INPUT + |
| YELLOW/BLACK STRIPE | 24 | INPUT GND |
| LAMBA VOLOMPARASY | 24 | AUXILIARY OUTPUT |
| YELLOW/RED STRIPE | 24 | +5V REFERENCE |
VALVE CONTROLLER
P/N: AX020710-1.5M
Table Table
Figure 5 – AX020710-1.5M Board Dimensions
| TABLET WIRING | |
| PIN# | fifandraisana |
| 1 | fahefana |
| 2 | Hery + |
| 3 | SOLENOID - |
| 4 | SOLENOID + |
| 5 | INPUT + |
| 6 | INPUT GND |
| 7 | AUXILIARY OUTPUT |
| 8 | +5V REFERENCE |
VALVE CONTROLLER
P/N: AX020710-PG9
Table Table
Figure 6 – AX020710-PG9 Board Dimensions
Torolàlana momba ny fametrahana
Fanamarihana & fampitandremana
- Aza apetraka akaikin'ny avo-volotage na fitaovana avo lenta.
- Note the operating temperature range. All field wiring must be suitable for that temperature range
- Apetraho ilay fitaovana miaraka amin'ny toerana mety ho an'ny serivisy sy ny fidirana amin'ny tariby tariby (15 sm) ary ny fanalefahana ny fanerena (30 sm).
- Do not connect or disconnect the unit while the circuit is live unless the area is known to be non-hazardous.
fitomboan'ny
Mounting holes are sized for #6 or M4 bolts. The bolt length will be determined by the end-user’s mounting plate thickness. The mounting flange of the controller is 0.062 inches (1.5 mm) thick
If the module is mounted without an enclosure, it should be mounted vertically with connectors faoing left or right to reduce likelihood of moisture entry.
Ny tariby an-tsaha rehetra dia tokony hifanaraka amin'ny mari-pana miasa.
Install the unit with appropriate space available for servicing and for adequate wire hamess access.
fifandraisana
It recommended to use 14-16 AWG wire for connection to power and solenoid
Tips on Configuration with NFC
Ny toerana sy ny isan'ny antena NFC dia tsy mitovy amin'ny finday sy finday. Mba handraisana ireo faritra sy toerana samihafa, ny antenna NFC an'ny mpanara-maso dia azo idirana amin'ny lafiny ambony sy ambany amin'ny solaitrabe.
Miankina amin'ny toerana misy ny antenne NFC sy/na ny isan'ny finday Android an'ny mpampiasa azy, dia mety ho mora kokoa ny manamboatra ny controller amin'ny lafiny iray na amin'ny lafiny iray. Amporisihina ny hamaritana ny toerana misy ny antenna NFC amin'ny finday sy/na hamantatra ny toerana sy ny elanelana mety indrindra amin'ny finday.
The metal enclosure acts as a shield for the NFC communication thus for AX020710-1.5M or AX020710-PG9, the board needs to be removed from the housing prior to configuring it.
Ireo paramètre mpifehy nidirana tamin'ny E-Write NFC
Maro ny masontsivana noresahina nandritra ity boky ity. Ity fizarana ity dia mamaritra sy mampiseho ny mari-pamantarana tsirairay, miaraka amin'ny default sy ny salan'isany. Raha mila fanazavana fanampiny momba ny fomba ampiasana ny mari-pamantarana tsirairay avy amin'ny 1IN-1OUT-NFC dia jereo ny fizarana mifandraika amin'ny Boky Torolàlana ho an'ny mpampiasa.
Fampahalalana mifehy
Ny Information Controller dia manome fampahalalana toy ny kinova ankehitriny momba ny firmware sy ny daty, ny laharan-tariby, ary koa ny mari-pamantarana azo amboarina mba hamantarana tsara kokoa ireo mpifehy 1IN-1OUT-NFC isan-karazany ao anatin'ny rafitra fampiharana Alias Controller.
Fakan-tsary amin'ny paramètres d'information controller
Universal Input
Voafaritra ao amin'ny Fizarana 1.2 ny sakana fiasan'ny Input Universal. Tsidiho azafady ity fizarana ity raha mila fanazavana amin'ny antsipiriany momba ny fomba ampiasana ireo mason-tsivana ireo.
Fakan-tsary amin'ny paramètres fampidirana maneran-tany
| Anarana | isan-karazany | toerana misy anao | -tsoratra |
| Input Type | Drop List | BOKYtage -5V to 5V | Refer to Section 1.2.1 |
| Error Detection | Drop List | DISO | |
| Pulses per Revolution | 0 hatramin'ny 60000 | 0 | If set to 0, measurements are taken in Hz. If value is set greater than 0, ny fandrefesana dia raisina amin'ny RPM |
| Minimum Error | Depends on Input Type | 0.2 (V) | Refer to Section 1.2.4 |
| Minimum Range | Depends on Input Type | 0.5 (V) | Refer to Section 1.2.3 |
| Maximum Range | Depends on Input Type | 4.5 (V) | Refer to Section 1.2.3 |
| Maximum Error | Depends on Input Type | 4.8 (V) | Refer to Section 1.2.4 |
| Error Hysteresis | Depends on | 0.5 (V) | Refer to Section 1.2.4 |
| Input Type | |||
| Digital Debounce Time | 0 hatramin'ny 60000 | 10 (ms) | Refer to Section 1.2.2 |
| Pullup/Pulldown Resistor | Drop List | 0 – Pullup/down NIALA | Refer to Section 1.2.2 |
| Software Filter Type | Drop List | 0 – tsy misy Sivana | Refer to Section 1.2.5 |
| Software Filter Constant | 0 hatramin'ny 60000 | 1000ms | Refer to Section 1.2.5 |
Proportional Output Drive
The Universal Input function block is defined in Section 1.4. Please refer to that section for detailed
information on how these parameters are used.
Fakan-tsary amin'ny paramètres fampidirana maneran-tany
Anarana |
isan-karazany |
toerana misy anao |
-tsoratra |
Control Source |
Drop List |
Universal Input |
Refer to Section 1.3 |
Output Type |
Drop List |
Proportional Current |
Refer to Section 1.3 |
Output at Minimum Command |
Depends on Output Type |
300 (mA) |
Refer to Section 1.4 |
Output at Maximum |
Depends on |
1500 (mA) |
Refer to Section 1.4 |
didy |
Output Type |
||
Ramp Up (Min to Max) |
0-60000 |
1000 (ms) |
Refer to Section 1.4 |
Ramp Down (Max to Min) |
0-60000 |
1000 (ms) |
Refer to Section 1.4 |
PWM Output Frequency |
1 hatramin'ny 25000 |
25000 (Hz) |
User can change the output frequency in any Output Type selected. However, output accuracy will be affected inProportional Current Mode |
Dither Frequency |
50-500 |
250 (Hz) |
Only used in Proportional Current and Hotshot Current Modes |
Dither Amphavoana |
0 hatramin'ny 500 |
0 (mA) |
Only used in Proportional Current and Hotshot Current Modes |
Hotshot Time |
0-60000 |
1000 (ms) |
|
Hotshot Current |
0-3000 |
1500 (mA) |
Lookup Table Parameters
The Lookup Table function block is defined in Section 1.5. Please refer there for detailed
information about how all these parameters are used.
Sarin'ny Example Lookup Table Parameters
| Anarana | isan-karazany | toerana misy anao | -tsoratra |
| Control Source | Drop List | Tsy ampiasaina | Refer to Section 1.3 |
| FAMALIANA | Drop List | Data Response | Refer to Section 1.5.1 |
| Auto-Cycling | Drop List | DISO | Refer to Section 1.5.5 |
| Point Response | Push Option | Ramp | Refer to Section 1.5.4 |
| X-Axis Point 0 | 0- X-AxisPoint 1 | 0 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| X-Axis Point 1 | X-Axis Point 0 to X-AxisPoint 2 | 20 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| X-Axis Point 2 | X-Axis Point 1 to X-AxisPoint 3 | 40 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| X-Axis Point 3 | X-Axis Point 2 to X-AxisPoint 4 | 60 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| X-Axis Point 4 | X-Axis Point 3 to X-AxisPoint 4 | 80 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| X-Axis Point 5 | X-Axis Point 4 to 100 | 100 (%) | X-Axis Points always in terms of percentage ny Loharano fanaraha-maso selected. Refer to Section 1.5.1 |
| Y-Axis Point 0 | 0-3000 | 0 | Refer to Section 1.5.2 |
| Y-Axis Point 1 | 0-3000 | 250 | Refer to Section 1.5.2 |
| Y-Axis Point 2 | 0-3000 | 500 | Refer to Section 1.5.2 |
| Y-Axis Point 3 | 0-3000 | 750 | Refer to Section 1.5.2 |
| Y-Axis Point 4 | 0-3000 | 1000 | Refer to Section 1.5.2 |
| Y-Axis Point 5 | 0-3000 | 1250 | Refer to Section 1.5.2 |
Famaritana ara-teknika
Ny famaritana dia manondro ary mety hiova. Ny tena zava-bita dia hiova arakaraka ny fampiharana sy ny fepetra fiasana. Ny mpampiasa dia tokony hanome fahafaham-po ny tenany fa ny vokatra dia mety ho ampiasaina amin'ny fampiharana natao. Ny vokatray rehetra dia manana fiantohana voafetra amin'ny lesoka amin'ny fitaovana sy ny asa. Azafady, jereo ny Garantie, ny fankatoavana/famerana ny fampiharana ary ny fizotry ny fitaovan'ny famerenana araka ny voalaza etsy ambony
https://www.axiomatic.com/service/.
Herin'aratra
| Power Supply Input – Nominal | 12 or 24Vdc nominal operating voltage9…36 Vdc power supply range for voltage transients OvervoltagMisy fiarovana hatramin'ny 45V. Overvoltage (undervoltage) shutdown of the output load is provided. |
| Surge Protection | NANOMEZAN'I |
| Reverse Polarity Protection | NANOMEZAN'I |
fahan'ny
| Analog Input Functions | BOKYtage Input or Current Input |
| BOKYtage Input | -5V…+5V (Impedance 110 kOhm)-10V…+10V (Impedance 130 kOhm) |
| Current Input | 0-20 mA (Impedance 249 Ohm) |
| Digital Input Functions | Discrete Input, PWM Input or Frequency Input |
| Digital Input Level | Up to VPS |
| PWM Input | 0…100%10 Hz…1kHz 100Hz…10 kHz |
| Frequency Input | 0.5Hz…50Hz10 Hz…1kHz 100Hz…10 kHz |
| Digital Input | Active High (to + VPS), Active Low Amplitude: 0 to + VPSThreshold: Low < 1V; High < 2.2V |
| Impedance fampidirana | 10KOhm pull down, 10KOhm pull up to +6V |
| Input Accuracy | < 1% |
| Analog Input Resolution | 12-bit ADC |
| Frequency / PWM Input Resolution | 16-bit Timer |
Output
| Output | Up to 3AHalf-bridge, High Side Sourcing, Current Sensing, Grounded Load High Frequency (25 kHz)The user can select the following options for output using E-Write NFC.· Output Disable· Output Current (PID loop, with current sensing) (0-3A)· Hotshot Digital· Proportional Output Voltage (up to VPS)· Output PWM Duty Cycle (0-100% Duty)· Digital On/Off (GND-VPS) |
| Output Accuracy | Output Current mode <1% Output Voltage mode <5%Output PWM Duty Cycle mode <0.1% |
| Output Resolution | Output Current mode 1 mA Output Voltage mode 0.1V Output PWM mode 0.1% |
| MIARO | Over-Current and short circuit protection |
Communication
| NFC Forum Type 4 | Near Field Communication Full-duplexData rate: 106 kbit/sComplies with ISO1443 (RF protocol), ISO13239, and ISO7816 Protected and secure configuration |
| User Interface | E-WRITE NFC Application is available for a fee from Google Play for Android devices (https://play.google.com/store/apps/details?id=com.axiomatic.ewritenfc).E-WRITE NFC Application can be downloaded for a fee from Apple’s App Store for iOS devices (https://apps.apple.com/us/app/e-write-nfc/id6473560354). |
Famaritana ankapobeny
| Microprocessor | STM32F205RET632-bit, 512 Kbit program flash |
| Quiescent Current | Contact Axiomatic. |
| LED famantarana | Power, heartbeat and output fault indication |
| Fotoam-pamaliana | Contact Axiomatic. |
| Control Logic | User programmable functionality using E-Write NFC |
| Fepetra miasa | -40 to 85 °C (-40 to 185 °F) |
| MIARO | IP00 for AX020710IP67 for AX020710-1.5M and AX020710-PG9 |
| lafiny | PCB:63.5 mm x 63.5 mm x 20 mm (2.5 in x 2.5 in x 0.78 in) (L x W x H)Metal Box with gasket and PG9 strain relief:114 mm x 32 mm x 89 mm (4.5 in x 1.25 in x 3.5 in) (W x D x H excluding PG9 strain relief) Refer to the dimensional drawing. |
| hovitrovitra | MIL-STD-202G, Method 204D test condition C (Sine) and Method 214A, test condition B (Random)10 g peak (Sine)7.68 Grms peak (Random) Pending |
| dona | MIL- STD-202G, Method 213B, test condition A 50g (half sine pulse, 9ms long, 8 per axis)Pending |
| fankatoavana | CE Marking Pending |
| lanja | AX020710 – 0.05 lb. (0.023 kg)AX020710-PG9 – 0.72 lb. (0.327 kg)AX020710-1.5M – 1.0 lb. (0.453 kg) |
| Electrical Connections | Refer to Section 2 of User Manual |
| fitomboan'ny | Mounting holes are sized for #6 or M4 bolts. The bolt length will be determined by the end-user’s mounting plate thickness. The mounting flange of the controller is 0.062 inches (1.5 mm) thick. If the module is mounted without an enclosure, it should be mounted vertically with connectors facing left or right to reduce likelihood of moisture entry. All field wiring should be suitable for the operating temperature range. Install the unit with appropriate space available for servicing and for adequate wire harness access. |
VERSION HISTORY
| Malagasy Bible | Daty | Mpanoratra | ny fanovana |
| 1 | May 8th, 2020 | Gustavo Del Valle | Initial Release |
| 1.1 | 8 aogositra 2023 | Kiril Mojsov | Performed Legacy Updates |
| 1.2 | 24 Jolay 2024 | M Ejaz | Added Android and iOS app links |
- Famatsiana herinaratra AC/DC
- Actuator Controls/Interfaces
- Automotive Ethernet Interfaces
- Battery Chargers
- CAN Controls, Routers, Repeater
- CAN/WIFI, CAN/Bluetooth, Routers
- Ankehitriny / Voltage/PWM Converters
- DC/DC Power Converters
- Scanner maripana maotera
- Ethernet/CAN mpanova, vavahady, switch
- Fan Drive Controllers
- Vavahady, CAN/Modbus, RS-232
- Gyroscopes, Inclinometers
- Hidraulika Valve Controllers
- Inclinometers, Triaxial
- Fanaraha-maso I/O
- LVDT Signal Converters
- Fifehezana milina
- Modbus, RS-422, RS-485 Fanaraha-maso
- Fanaraha-maso maotera, Inverter
- Famatsiana herinaratra, DC/DC, AC/DC
- PWM Signal Converters/Isolators
- Resolver Signal Conditioners
- Fitaovana serivisy
- Conditioner famantarana, mpanova
- Strain Gauge CAN Controls
- Surge Suppressors
NY ORINASA
Axiomatic dia manome fitaovana fanaraha-maso milina elektronika ho an'ny fiara tsy mataho-dalana, fiara ara-barotra, fiara elektrika, milina mpamokatra herinaratra, fikarakarana akora, angovo azo havaozina ary tsena OEM indostrialy. Izahay dia manavao miaraka amin'ny fanaraha-maso milina voavolavola sy tsy misy talantalana izay manome lanja ny mpanjifanay.
DESIGN SY FOTOANA KALITA
Manana ISO9001: 2015 voasoratra anarana famolavolana/famokarana trano any Canada.
WARRANTY, FANEKEM-PIHAVANANA/FETRA
Axiomatic Technologies Corporation dia manana zo hanao fanitsiana, fanovana, fanatsarana, fanatsarana ary fanovana hafa amin'ny vokatra sy serivisy amin'ny fotoana rehetra ary hampiato ny vokatra na serivisy tsy misy fampandrenesana. Ny mpanjifa dia tokony hahazo ny vaovao farany mifandraika alohan'ny hametrahana baiko ary tokony hanamarina fa vaovao sy feno izany fampahalalana izany. Ny mpampiasa dia tokony hanome fahafaham-po ny tenany fa ny vokatra dia mety ho ampiasaina amin'ny fampiharana natao. Ny vokatray rehetra dia manana fiantohana voafetra amin'ny lesoka amin'ny fitaovana sy ny asa. Azafady, jereo ny Garantie, ny fankatoavana/famerana ny fampiharana ary ny fizotry ny famerenana ny fitaovana ao amin'ny https://www.axiomatic.com/service/.
fanajana
Ny antsipirian'ny fanarahana ny vokatra dia azo jerena ao amin'ny literatiora momba ny vokatra sy/na ao amin'ny axiomatic.com. Ny fanontaniana rehetra dia tokony halefa any amin'ny sales@axiomatic.com.
FAMPIASANA TSARA
Ny vokatra rehetra dia tokony hokarakarain'ny Axiomatic. Aza manokatra ny vokatra ary manatanteraka ny serivisy.
Ity vokatra ity dia mety hampiharihary anao amin'ny zavatra simika izay fantatra any amin'ny Fanjakan'i Kalifornia, Etazonia mahatonga ny homamiadana sy ny fananahana. Raha mila fanazavana fanampiny dia tsidiho ny www.p65Warnings.ca.gov.
fanompoana
Ny vokatra rehetra haverina amin'ny Axiomatic dia mila laharan'ny fanomezan-dàlana hamerenana ny fitaovana (RMA#). rma@axiomatic.com. Omeo azafady ireto fampahalalana manaraka ireto rehefa mangataka laharana RMA:
- Numéro série, laharan’ny ampahany
- Ora fampandehanana, famaritana ny olana
- Wiring dia mametraka diagram, fampiharana ary fanehoan-kevitra hafa raha ilaina
FANDRAISANA
Ny vokatra axiomatic dia fako elektronika. Araho azafady ny lalàna momba ny fako sy ny fanodinana ny fako eo an-toerana, ny fitsipika ary ny politika momba ny fanariana na fanodinana fako elektronika.
CONTACTS
Ny sandan'ny anjara Axiomatic Technologies Corporation
1445 Courtneypark Drive E. Mississauga, ON
KANADA L5T 2E3
TEL: +1 905 602 9270
FAX: +1 905 602 9279
www.axiomatic.com
sales@axiomatic.com
Ny sandan'ny anjara Axiomatic Technologies Oy
Höytämöntie 6 33880 Lempäälä
FAILANDY
TEL: +358 103 375 750
www.axiomatic.com
salesfinland@axiomatic.com
Documents / Loharano
 |
AXIOMATIC AX020710 tokana Output Valve Controller [pdf] Boky Torolàlana AX020710, AX020710 tokana Output Valve Controller, tokana Output Valve Controller, Output Valve Controller, Valve Controller, Controller |