AXIOMATIC AX020710 Single Sorti Valv Kontwolè Manyèl Itilizatè
SOUVIEW KONTWÒLÈ
Description of Universal Input to Proportional Valve Output NFC Controller
Manyèl Itilizatè sa a dekri achitekti ak fonksyonalite Inivèsèl Antre nan Kontwolè Valv Selibatè Sorti ak Near Field Communication (NFC). Tout antre ak blòk fonksyon lojik sou inite a se natirèlman endepandan youn ak lòt men yo ka konfigirasyon pou kominike youn ak lòt.
All parameters are configurable using the mobile E-Write NFC configuration tool available on the Google Play Store and Apple App Store. E-Write NFC allows the user to configure the module as well as to assign each of the AX020710 controllers a unique alias to easily distinguish between the controllers within a large system.
Teknoloji NFC kontwolè a bay itilizatè yo kapasite pou yo konfigirasyon kontwolè yo san yo pa bezwen limen. Karakteristik sa a pwouve itil espesyalman nan ka, pou egzanpample, nan ki inite a enstale nan yon sistèm ki mande akor epi li pa bezwen izole nan sistèm nan ak mache sou deyò pou fè akor la; olye de sa inite a ka configuré ak sistèm nan koupe.
The controller (1IN-1OUT-NFC) is designed for versatile control of a universal input and a proportional valve output. The hardware design allows for the controller to have a wide range of input and output types. The control algorithms/function blocks allow the user to configure the controller for a wide range of applications without the need for custom firmware. The various function blocks supported by the 1IN-1OUT-NFC are outlined in the following sectioris.
D' inivèsèl kapab être configuré pou li analòg siyal: Voltage, Kouran, ak Rezistans osi byen ke siyal dijital: Frekans / RPM, PWM, ak kalite dijital. Antre yo dekri an plis detay nan seksyon 1.2.
Menm jan an tou, pwodiksyon an ka configuré nan diferan kalite: Pwopòsyonèl aktyèl, Voltage, PWM, Hotshot Digital Current ak Digital (ON/OFF). Chak pwodiksyon konsiste de yon bò segondè chofè mwatye pon kapab sous jiska 3Amps ak fèmen pyès ki nan konpitè nan 4Amps. Yo dekri rezilta yo an plis detay nan seksyon 1.4.
Universal Input Function Block
Kontwolè a konsiste de yon sèl opinyon inivèsèl epi yo ka configuré pou mezire voltage, aktyèl, frekans / RPM, batman kè lajè modulation (PWM) ak siyal dijital. Sou-seksyon ki anba yo detaye karakteristik/fonksyonalite opinyon inivèsèl la.
Kalite Capteur Antre
Table 1 lists the supported input types by the controller. The Input Type parameter provides a dropdown list with the input types described in Table 1. Changing the Input Type affects other parameters within the same parameter group such as Minimum/Maximum Error/Range by refreshing them to new input type and thus should be changed first
Manyèl itilizatè UMAX020710 vèsyon 1.2
| 0 | Non Itilize |
| 1 | Voltage -5V pou +5V |
| 2 | Voltage -10V pou +10V |
| 3 | Kouran 0 pou 20mA |
| 4 | Frekans 0.5 pou 50Hz |
| 5 | Frekans 10Hz pou 1kHz |
| 6 | Frekans 100Hz pou 10kHz |
| 7 | PWM Ba Frekans (<1kHz) |
| 8 | PWM Segondè Frekans (>100Hz) |
| 9 | Digital (Nòmal) |
| 10 | Digital (Inverse) |
| 11 | Digital (Latched) |
Tablo 1 - Opsyon Kalite Capteur Antre Inivèsèl
Tout antre analòg yo manje dirèkteman nan yon konvètisè analòg-dijital (ADC) 12-bit nan mikrokontwolè a. Tout voltagAntre e yo se gwo enpedans pandan y ap antre aktyèl yo sèvi ak yon rezistans 2490 pou mezire siyal la.
Frequency/RPM, and Pulse Width Modulated (PWM) Kalite Antre are connected to the microcontroller timers. Puls pou chak Revolisyon parameter is only taken into consideration when the Kalite Antre selected is one of the frequency types as per Table 1. When Pulses per Revolution parameter is set to 0, the measurements taken will be in units of [Hz]. If Pulses per Revolution parameter is set to higher than 0, the measurements taken will be in units of [RPM].
Digital Kalite Antre offers three modes: Normal, Inverse, and Latched. The measurements taken with digital input types are 1 (ON) or 0 (OFF).
1.2.2. Opsyon Rezistans Pullup / Pulldown
Avèk Kalite Antre: Frekans/RPM, PWM, Digital, itilizatè a gen opsyon pou twa (3) opsyon diferan rale moute/rale desann jan yo endike nan Tablo 2.
| 0 | Non Itilize |
| 1 | 10kΩ Pullup |
| 2 | 10kΩ deroulan |
Tablo 2 - Opsyon Rezistans Pullup/Pulldown
These options can be enabled or disabled by adjust the parameter Pullup/Pulldown Resistor in
E-Write NFC
Minimum and Maximum Ranges
La Minimòm Range epi Maksimòm Range parameters are used to create the overall useful range of the inputs. For example, si Minimòm Range is set to 0.5V and Maksimòm Range is set to 4.5V, the overall useful range (0-100%) is between 0.5V to 4.5V. Anything below the Minimum Range will saturate at Minimum Range. Similarly, anything above the Maksimòm Range will saturate at Maximum Range.
Minimum and Maximum Errors
La Erè minimòm epi Maksimòm erè parameters are used when Deteksyon erè is True. When Deteksyon erè is enabled, any input measurement at or below/above the Minimum/Maximum Error parameters will create an input fault. When the input fault occurs, if the input is commanding the output, the output will shut off. The fault will be cleared as soon as the measured input is within Minimum Error+ or Maximum Error- the Error Hysteresis value. On the contrary, when Deteksyon erè se mete sou FALSE, no fault will occur and the Erè minimòm epi Maksimòm erè will not be taken into consideration.
Digital Debounce Tan
Paramèt sa a yo itilize nan Kalite Antre Digital (Nòmal), Digital (Envès) ak Digital (Latched). Li se tan an kontwolè a tann jiskaske pwosesis ak pwopagasyon eta a nan opinyon an lè yon kwen deklanche. Sa a ede filtre pouse-bouton oswa switch ki fè bwi yo nan lòd yo li yon siyal/eta pwòp.
Input Filter Types
Tout kalite opinyon eksepte Digital (Nòmal), Digital (Inverse), Digital (Latched) ka filtre lè l sèvi avèk Filter Type ak Filter Constant paramèt. Gen twa (3) kalite filtre ki disponib jan lis nan Tablo 3.
| 0 | Non Itilize |
| 1 | K ap deplase Mwayèn |
| 2 | Repete Mwayèn |
Tablo 3 - Kalite filtraj Antre
Premye opsyon filtre Pa gen filtraj, pa bay okenn filtraj done yo mezire. Kidonk done yo mezire yo pral dirèkteman itilize nan nenpòt blòk fonksyon ki sèvi ak done sa yo.
The second option, Moving Average, applies the ‘Equation 1’ below to measured input data, where Value N represents the current input measured data, while ValueN-1 represents the previous filtered data. The Filter Constant is the Input Filter Constant parameter.
Ekwasyon 1 – Fonksyon filtè an mwayèn k ap deplase:
The third option, Repeating Average, applies the ‘Equation 2’ below to measured input data, where N is the value of Input Filter Constant parameter. The filtered input, Value, is the average of all input measurements taken in N (Input Filter Constant) number of reads. When the average istaken, the filtered input will remain until the next average is ready.
Ekwasyon 2 – Repete Fonksyon Transfè Mwayèn:
Internal Function Block Control Sources
Kontwolè 1IN-1OUT-NFC a pèmèt sous entèn blòk fonksyon yo dwe chwazi nan lis la nan blòk fonksyon lojik yo sipòte pa kontwolè a. Kòm yon rezilta, nenpòt pwodiksyon nan yon blòk fonksyon ka chwazi kòm sous kontwòl pou yon lòt. Lis sous kontwòl yo montre nan Tablo 4.
| Valè | Siyifikasyon |
| 0 | Kontwòl Sous Non Itilize |
| 2 | Inivèsèl Antre Mezire |
| 5 | Chèche Tablo Fonksyon Blòk |
Tablo 4 - Opsyon Sous Kontwòl
Anplis de yon sous, chak kontwòl tou gen yon nimewo ki koresponn ak sub-endèks blòk fonksyon an nan kesyon an. Tablo 5 prezante seri yo sipòte pou nimewo objè yo, tou depann de sous yo te chwazi a.
| Kontwòl Sous | Kontwòl Sous Nimewo |
| Control Source Not Used (Ignored) | [0] |
| Inivèsèl Antre Mezire | [1…1] |
| Lookup Table Function Block | [1…1] |
Tablo 5 – Opsyon Nimewo Sous Kontwòl
Figi 1 - sous analogique D' Digital
Output Drive Function Blocks
Kontwolè a konsiste de yon sèl pwodiksyon pwopòsyonèl. Sòti a konsiste de yon bò segondè chofè mwatye pon ki kapab sous jiska 3Amps. Sòti yo konekte ak periferik revèy mikrokontwolè endepandan epi konsa yo ka konfigirasyon poukont yo soti nan 1Hz a 25kHz.
Paramèt Kalite Sòti a detèmine ki kalite siyal pwodiksyon an pwodui. Chanje paramèt sa a lakòz lòt paramèt nan gwoup la mete ajou pou matche ak kalite chwazi. Pou rezon sa a, premye paramèt ki ta dwe chanje anvan konfigirasyon lòt paramèt se paramèt Kalite Sòti a. Kalite pwodiksyon sipòte pa kontwolè a yo ki nan lis nan Tablo 6 anba a:
| 0 | Andikape |
| 1 | Proportional Current |
| 2 | Digital Hotshot |
| 3 | Proportional Voltage (0-Vps) |
| 4 | PWM Duty Cycle |
| 5 | Digital (0-Vps) |
Ekwasyon 3 – Kalkil pant lineyè
Yo itilize Tablo Lookup la pou bay yon repons pwodiksyon ki rive jiska 5 pant. Gen de kalite repons Tablo Lookup ki baze sou Repons Tablo Lookup: Repons Done ak Repons Tan Seksyon 1.5.2 jiska 1.5.6 pral dekri de kalite Repons sa yo an plis detay.
Nan ka kote tip X-Axis = Done Repons, pwen yo sou X-Axis la reprezante done sous kontwòl la. Valè sa yo an pousantage (%) ak reprezante pousantage nan Sous Kontwòl yo chwazi a.
0% <= X_{0} <= X_{0} <= X_{1} <= X_{1} <= X_{2} <= X_{3} <= X_{4} <= X_{5} <= (100%)%
Aks Y a pa gen okenn kontrent sou done li reprezante yo. Sa vle di ke envès, oswa ogmante/diminye oswa lòt repons yo ka fasil etabli.
Pa defo, tab rechèch la enfim (Sous kontwòl tab rechèch la mete sou Kontwòl pa itilize). Ou ka itilize Tablo Lookup la pou kreye pro repons ou vle afiles. Lè yo itilize Antre Inivèsèl la kòm Sous Kontwòl, pwodiksyon Tablo Lookup la pral sa itilizatè a antre nan paramèt Y-Values.
X-Axis, Time Response
Enstriksyon Enstalasyon
Dimansyon ak Pinout
Kontwolè 1IN-1OUT-NFC a se yon tablo PCB reyini ak yon gwo kouch konfòm pou pwoteksyon eleman kont vibrasyon ak lòt eleman. Asanble AX020710 la gen yon evalyasyon IP00, pandan y ap asanble AX020710-1.5M ak AX020710-PG9 yo genyen yon evalyasyon IP67.
| WIREING TABLE | |
| PIN# | Koneksyon |
| 1 | Pouvwa |
| 2 | Pouvwa + |
| 3 | SOLENOID - |
| 4 | SOLENOID + |
| 5 | Antre + |
| 6 | Antre GND |
| 7 | Sòti oksilyè |
| 8 | +5V REFERENCE |
Figure 4 – AX020710 Board Dimensions
| WIREING TABLE | ||
| KOULÈ FIL | FIL AWG | KONEKSYON |
| NWA | 18 | POUVWA |
| WOUJ | 18 | POUVWA + |
| ORANGE/BLACK STRIPE | 18 | SOLENOID- |
| ORANGE/RED STRIPE | 18 | SOLENOID + |
| JÒN | 24 | Antre + |
| YELLOW/BLACK STRIPE | 24 | Antre GND |
| vyolèt | 24 | Sòti oksilyè |
| YELLOW/RED STRIPE | 24 | +5V REFERENCE |
VALVE CONTROLLER
P/N: AX020710-1.5M
Tablo Inite
Figure 5 – AX020710-1.5M Board Dimensions
| WIREING TABLE | |
| PIN# | Koneksyon |
| 1 | Pouvwa |
| 2 | Pouvwa + |
| 3 | SOLENOID - |
| 4 | SOLENOID + |
| 5 | Antre + |
| 6 | Antre GND |
| 7 | Sòti oksilyè |
| 8 | +5V REFERENCE |
VALVE CONTROLLER
P/N: AX020710-PG9
Tablo Inite
Figure 6 – AX020710-PG9 Board Dimensions
Enstriksyon pou monte
Nòt ak Avètisman
- Pa enstale tou pre high-voltage oswa segondè-aktyèl aparèy.
- Note the operating temperature range. All field wiring must be suitable for that temperature range
- Enstale inite a ak espas apwopriye ki disponib pou sèvis ak pou aksè adekwat ekipay fil (15 cm) ak soulajman souch (30 cm).
- Do not connect or disconnect the unit while the circuit is live unless the area is known to be non-hazardous.
Montaj
Mounting holes are sized for #6 or M4 bolts. The bolt length will be determined by the end-user’s mounting plate thickness. The mounting flange of the controller is 0.062 inches (1.5 mm) thick
If the module is mounted without an enclosure, it should be mounted vertically with connectors faoing left or right to reduce likelihood of moisture entry.
Tout fil elektrik jaden yo ta dwe apwopriye pou ranje tanperati opere.
Install the unit with appropriate space available for servicing and for adequate wire hamess access.
Koneksyon
It recommended to use 14-16 AWG wire for connection to power and solenoid
Tips on Configuration with NFC
Kote ak seri antèn NFC diferan de smartphone ak smartphone. Pou akomode diferan ranje ak kote, antèn NFC kontwolè a aksesib apati bò anwo ak anba tablo a.
Tou depan de kote antèn NFC a ak/oswa seri smartphone android itilizatè a, li ka pi bon pou konfigirasyon kontwolè a soti nan yon bò oswa nan lòt la. Li rekòmande pou detèmine kote antèn NFC la sou smartphone la ak/oswa idantifye kote ak ranje ki pi byen adapte smartphone la.
The metal enclosure acts as a shield for the NFC communication thus for AX020710-1.5M or AX020710-PG9, the board needs to be removed from the housing prior to configuring it.
Paramèt Kontwolè Aksè ak E-Write NFC
Anpil paramèt yo te referans nan tout manyèl sa a. Seksyon sa a dekri epi montre chak paramèt, ansanm ak default yo ak chenn yo. Pou plis enfòmasyon sou fason 1IN-1OUT-NFC itilize chak paramèt, al gade nan seksyon ki enpòtan nan Manyèl Itilizatè a.
Enfòmasyon sou kontwolè
Enfòmasyon sou Kontwolè a bay enfòmasyon tankou vèsyon aktyèl firmwèr ak dat, nimewo seri, ansanm ak yon paramèt configurable pou pi byen idantifye divès kalite contrôleur 1IN-1OUT-NFC nan yon sistèm aplikasyon Controller Alias.
Ekran Capture nan Paramèt Enfòmasyon Kontwolè
Antre inivèsèl
Blòk fonksyon Inivèsèl la defini nan Seksyon 1.2. Tanpri gade nan seksyon sa a pou enfòmasyon detaye sou fason yo itilize paramèt sa yo.
Kaptire Ekran nan Paramèt Antre Inivèsèl Default
| Non | Range | Default | Nòt |
| Input Type | Drop List | Voltage -5V to 5V | Refer to Section 1.2.1 |
| Error Detection | Drop List | Fo | |
| Pulses per Revolution | 0 a 60000 | 0 | If set to 0, measurements are taken in Hz. If value is set greater than 0, mezi yo pran an RPM |
| Minimum Error | Depends on Input Type | 0.2 (V) | Refer to Section 1.2.4 |
| Minimum Range | Depends on Input Type | 0.5 (V) | Refer to Section 1.2.3 |
| Maximum Range | Depends on Input Type | 4.5 (V) | Refer to Section 1.2.3 |
| Maximum Error | Depends on Input Type | 4.8 (V) | Refer to Section 1.2.4 |
| Error Hysteresis | Depends on | 0.5 (V) | Refer to Section 1.2.4 |
| Input Type | |||
| Digital Debounce Time | 0 a 60000 | 10 (ms) | Refer to Section 1.2.2 |
| Pullup/Pulldown Resistor | Drop List | 0 - Pullup/down Off | Refer to Section 1.2.2 |
| Software Filter Type | Drop List | 0 - Non Filtre | Refer to Section 1.2.5 |
| Software Filter Constant | 0 a 60000 | 1000 ms | Refer to Section 1.2.5 |
Proportional Output Drive
The Universal Input function block is defined in Section 1.4. Please refer to that section for detailed
information on how these parameters are used.
Kaptire Ekran nan Paramèt Antre Inivèsèl Default
Non |
Range |
Default |
Nòt |
Control Source |
Drop List |
Universal Input |
Refer to Section 1.3 |
Output Type |
Drop List |
Proportional Current |
Refer to Section 1.3 |
Output at Minimum Command |
Depends on Output Type |
300 (mA) |
Refer to Section 1.4 |
Output at Maximum |
Depends on |
1500 (mA) |
Refer to Section 1.4 |
Kòmandman |
Output Type |
||
Ramp Up (Min to Max) |
0-60000 |
1000 (ms) |
Refer to Section 1.4 |
Ramp Down (Max to Min) |
0-60000 |
1000 (ms) |
Refer to Section 1.4 |
PWM Output Frequency |
1 a 25000 |
25000 (Hz) |
User can change the output frequency in any Output Type selected. However, output accuracy will be affected inProportional Current Mode |
Dither Frequency |
50-500 |
250 (Hz) |
Only used in Proportional Current and Hotshot Current Modes |
Dither Amplitid |
0 a 500 |
0 (mA) |
Only used in Proportional Current and Hotshot Current Modes |
Hotshot Time |
0-60000 |
1000 (ms) |
|
Hotshot Current |
0-3000 |
1500 (mA) |
Lookup Table Parameters
The Lookup Table function block is defined in Section 1.5. Please refer there for detailed
information about how all these parameters are used.
Ekran Capture nan Example Lookup Table Parameters
| Non | Range | Default | Nòt |
| Control Source | Drop List | Not Used | Refer to Section 1.3 |
| Repons | Drop List | Data Response | Refer to Section 1.5.1 |
| Oto-monte bisiklèt | Drop List | Fo | Refer to Section 1.5.5 |
| Point Response | Push Option | Ramp | Refer to Section 1.5.4 |
| X-Axis Point 0 | 0- X-AxisPoint 1 | 0 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| X-Axis Point 1 | X-Axis Point 0 to X-AxisPoint 2 | 20 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| X-Axis Point 2 | X-Axis Point 1 to X-AxisPoint 3 | 40 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| X-Axis Point 3 | X-Axis Point 2 to X-AxisPoint 4 | 60 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| X-Axis Point 4 | X-Axis Point 3 to X-AxisPoint 4 | 80 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| X-Axis Point 5 | X-Axis Point 4 to 100 | 100 (%) | X-Axis Points always in terms of percentage nan Kontwòl Sous selected. Refer to Section 1.5.1 |
| Y-Axis Point 0 | 0-3000 | 0 | Refer to Section 1.5.2 |
| Y-Axis Point 1 | 0-3000 | 250 | Refer to Section 1.5.2 |
| Y-Axis Point 2 | 0-3000 | 500 | Refer to Section 1.5.2 |
| Y-Axis Point 3 | 0-3000 | 750 | Refer to Section 1.5.2 |
| Y-Axis Point 4 | 0-3000 | 1000 | Refer to Section 1.5.2 |
| Y-Axis Point 5 | 0-3000 | 1250 | Refer to Section 1.5.2 |
Espesifikasyon teknik
Espesifikasyon yo endike epi yo ka chanje. Pèfòmans aktyèl yo pral varye selon aplikasyon an ak kondisyon fonksyònman yo. Itilizatè yo ta dwe satisfè tèt yo ke pwodwi a apwopriye pou itilize nan aplikasyon an gen entansyon. Tout pwodwi nou yo pote yon garanti limite kont domaj nan materyèl ak atizan konn fè. Tanpri gade nan Garanti nou an, Apwobasyon Aplikasyon/Limitasyon ak Pwosesis Retounen Materyèl jan sa dekri nan
https://www.axiomatic.com/service/.
Pwovizyon pou pouvwa
| Power Supply Input – Nominal | 12 or 24Vdc nominal operating voltage9…36 Vdc power supply range for voltage transitoires OvervoltagYo bay pwoteksyon jiska 45V. Overvoltage (undervoltage) shutdown of the output load is provided. |
| Pwoteksyon kont surgman | Bay |
| Reverse Polarity Protection | Bay |
Antre
| Analog Input Functions | Voltage Input or Current Input |
| Voltage Input | -5V…+5V (Impedance 110 kOhm)-10V…+10V (Impedance 130 kOhm) |
| Current Input | 0-20 mA (Impedance 249 Ohm) |
| Digital Input Functions | Discrete Input, PWM Input or Frequency Input |
| Digital Input Level | Up to VPS |
| PWM Input | 0…100%10 Hz…1kHz 100Hz…10 kHz |
| Frequency Input | 0.5Hz…50Hz10 Hz…1kHz 100Hz…10 kHz |
| Digital Input | Active High (to + VPS), Active Low Amplitude: 0 to + VPSThreshold: Low < 1V; High < 2.2V |
| Enpedans Antre | 10KOhm pull down, 10KOhm pull up to +6V |
| Input Accuracy | <1% |
| Analog Input Resolution | 12-bit ADC |
| Frequency / PWM Input Resolution | 16-bit Timer |
Sòti
| Sòti | Up to 3AHalf-bridge, High Side Sourcing, Current Sensing, Grounded Load High Frequency (25 kHz)The user can select the following options for output using E-Write NFC.· Output Disable· Output Current (PID loop, with current sensing) (0-3A)· Hotshot Digital· Proportional Output Voltage (up to VPS)· Output PWM Duty Cycle (0-100% Duty)· Digital On/Off (GND-VPS) |
| Output Accuracy | Output Current mode <1% Output Voltage mode <5%Output PWM Duty Cycle mode <0.1% |
| Output Resolution | Output Current mode 1 mA Output Voltage mode 0.1V Output PWM mode 0.1% |
| Pwoteksyon | Over-Current and short circuit protection |
Kominikasyon
| NFC Forum Type 4 | Near Field Communication Full-duplexData rate: 106 kbit/sComplies with ISO1443 (RF protocol), ISO13239, and ISO7816 Protected and secure configuration |
| User Interface | E-WRITE NFC Application is available for a fee from Google Play for Android devices (https://play.google.com/store/apps/details?id=com.axiomatic.ewritenfc).E-WRITE NFC Application can be downloaded for a fee from Apple’s App Store for iOS devices (https://apps.apple.com/us/app/e-write-nfc/id6473560354). |
Espesifikasyon jeneral
| Mikwoprosesè | STM32F205RET632-bit, 512 Kbit program flash |
| Quiescent Current | Contact Axiomatic. |
| Dirije Endikatè | Power, heartbeat and output fault indication |
| Response Time | Contact Axiomatic. |
| Control Logic | User programmable functionality using E-Write NFC |
| Kondisyon Fonksyònman | -40 to 85 °C (-40 to 185 °F) |
| Pwoteksyon | IP00 for AX020710IP67 for AX020710-1.5M and AX020710-PG9 |
| Dimansyon | PCB:63.5 mm x 63.5 mm x 20 mm (2.5 in x 2.5 in x 0.78 in) (L x W x H)Metal Box with gasket and PG9 strain relief:114 mm x 32 mm x 89 mm (4.5 in x 1.25 in x 3.5 in) (W x D x H excluding PG9 strain relief) Refer to the dimensional drawing. |
| Vibration | MIL-STD-202G, Method 204D test condition C (Sine) and Method 214A, test condition B (Random)10 g peak (Sine)7.68 Grms peak (Random) Pending |
| Chòk | MIL- STD-202G, Method 213B, test condition A 50g (half sine pulse, 9ms long, 8 per axis)Pending |
| Apwobasyon | CE Marking Pending |
| Pwa | AX020710 – 0.05 lb. (0.023 kg)AX020710-PG9 – 0.72 lb. (0.327 kg)AX020710-1.5M – 1.0 lb. (0.453 kg) |
| Electrical Connections | Refer to Section 2 of User Manual |
| Montaj | Mounting holes are sized for #6 or M4 bolts. The bolt length will be determined by the end-user’s mounting plate thickness. The mounting flange of the controller is 0.062 inches (1.5 mm) thick. If the module is mounted without an enclosure, it should be mounted vertically with connectors facing left or right to reduce likelihood of moisture entry. All field wiring should be suitable for the operating temperature range. Install the unit with appropriate space available for servicing and for adequate wire harness access. |
ISTWA VÈSYON
| Version | Dat | Otè | Modifikasyon |
| 1 | May 8th, 2020 | Gustavo Del Valle | Initial Release |
| 1.1 | 8 Out 2023 | Kiril Mojsov | Performed Legacy Updates |
| 1.2 | 24 jiyè 2024 | M Ejaz | Added Android and iOS app links |
- AC/DC Power Supplies
- Kontwòl/entèfas actuator
- Entèfas Ethernet otomobil
- Batri chajè
- CAN Kontwòl, Routeurs, Repeater
- CAN/WIFI, CAN/Bluetooth, Routers
- Kouran / Voltage/PWM konvètisè
- DC/DC Power Converters
- Tanperati motè eskanè
- Ethernet / CAN Convertisseurs, Gateways, Switch
- Fan Drive Controllers
- Passerelles, CAN/Modbus, RS-232
- Jiroskop, Inclinometers
- Kontwolè Valv idwolik
- Inklinomètr, Triaxial
- Kontwòl I/O
- Konvètisè siyal LVDT
- Kontwòl machin
- Modbus, RS-422, RS-485 Kontwòl
- Kontwòl motè, varyateur
- Pwovizyon pou pouvwa, DC/DC, AC/DC
- PWM siyal konvètisè/izolatè
- Kondisyonè siyal rezolisyon
- Zouti Sèvis
- Kondisyonè siyal, konvètisè
- Kontwòl kalib souch yo
- Sipresyon vag
KONPAYI NOU
Axiomatic bay konpozan kontwòl machin elektwonik sou gran wout, machin komèsyal, machin elektrik, seri dèlko pouvwa, manyen materyèl, enèji renouvlab ak mache endistriyèl OEM. Nou inove ak enjenyè ak kontwòl machin ki pa nan etajè ki ajoute valè pou kliyan nou yo.
KALITE DESIGN AK MANIFAKTI
Nou gen yon ISO9001:2015 anrejistre konsepsyon / etablisman fabrikasyon nan Kanada.
GARANTI, Apwobasyon APLIKASYON/LIMITASYON
Axiomatic Technologies Corporation rezève dwa pou fè koreksyon, modifikasyon, amelyorasyon, amelyorasyon, ak lòt chanjman nan pwodwi ak sèvis li yo nenpòt ki lè epi sispann nenpòt pwodwi oswa sèvis san avètisman. Kliyan yo ta dwe jwenn dènye enfòmasyon enpòtan yo anvan yo mete lòd epi yo ta dwe verifye si enfòmasyon sa yo aktyèl e konplè. Itilizatè yo ta dwe satisfè tèt yo ke pwodwi a apwopriye pou itilize nan aplikasyon an gen entansyon. Tout pwodwi nou yo pote yon garanti limite kont domaj nan materyèl ak atizan konn fè. Tanpri gade nan Garanti nou an, Apwobasyon Aplikasyon/Limitasyon ak Pwosesis Retounen Materyèl nan https://www.axiomatic.com/service/.
KONFÒMITE
Ou ka jwenn detay sou konfòmite pwodwi nan literati pwodwi a ak/oswa sou axiomatic.com. Nenpòt kesyon yo ta dwe voye bay sales@axiomatic.com.
ITILIZE SEKIRITE
Tout pwodwi yo ta dwe sèvis pa Axiomatic. Pa louvri pwodwi a epi fè sèvis la tèt ou.
Pwodui sa a ka ekspoze ou nan pwodui chimik yo konnen nan Eta Kalifòni, USA pou lakòz kansè ak domaj repwodiktif. Pou plis enfòmasyon ale nan www.P65Warnings.ca.gov.
SÈVIS
Tout pwodwi yo dwe retounen nan Axiomatic mande pou yon Retounen Materyèl otorizasyon Nimewo (RMA#) soti nan rma@axiomatic.com. Tanpri bay enfòmasyon sa yo lè w ap mande yon nimewo RMA:
- Nimewo seri, nimewo pati
- Orè ègzekutabl, deskripsyon pwoblèm
- Fil elektrik mete kanpe dyagram, aplikasyon ak lòt kòmantè jan sa nesesè
DISPOSITION
Pwodwi aksiomatik yo se fatra elektwonik. Tanpri swiv lwa, règleman ak règleman sou fatra anviwònman lokal ou a ak resiklaj pou jete oswa resiklaj dechè elektwonik yo san danje.
KONTAK
Axiomatic Technologies Corporation
1445 Courtneypark Drive E. Mississauga, ON
Kanada L5T 2E3
TEL: +1 905 602 9270
FAKS: +1 905 602 9279
www.axiomatic.com
sales@axiomatic.com
Axiomatic Technologies Oy
Höytämöntie 6 33880 Lempäälä
FINLAND
TEL: +358 103 375 750
www.axiomatic.com
salesfinland@axiomatic.com
Dokiman / Resous
 |
AXIOMATIC AX020710 Single Sorti Valv Kontwolè [pdfManyèl Itilizatè AX020710, AX020710 Single Sorti Valv Kontwolè, Single Sorti Valv Kontwolè, Sòti Valv Kontwolè, Valv Kontwolè, Kontwolè |