Ihe nbipute EasyCoder PD42 bụ ngwa nbipute labelụ na-arụ ọrụ dị elu
emebere maka ụlọ ọrụ mmepụta ihe na azụmahịa. Ọ na-enye a pụrụ ịdabere na na
ibipụta akara nke ọma, tags, na akwụkwọ nnata. Na ya
interface enyi na enyi na njirimara dị elu, ngwa nbipute PD42 bụ
adabara maka ọtụtụ ngwa ngwa.

Nkọwapụta

Teknụzụ obibi akwụkwọ: nnyefe ọkụ na ọkụ ozugbo
Mkpebi: 203 dpi (ntụpọ 8 / mm) ma ọ bụ 300 dpi (ntụpọ 12 / mm)
Obosara mbipụta: Ruo 4.25 inch (108 mm)
Ọsọ mbipụta: Ruo 6 inch (152 mm) kwa nkeji

Njikọ: USB, Serial, Parallel, Ethernet
Ụdị mgbasa ozi: Mpempe akwụkwọ na-enyefe ma ọ bụ nke fan-folda, tags, na
akwụkwọ nnata
Ogologo mgbasa ozi: 1.0 inch (25.4 mm) ruo 4.65 inch (118 mm)
Ogologo mgbasa ozi: Opekempe 0.5 inch (12.7 mm), Kachasị 99 inch
(2515 mm)

Ebe nchekwa: 16 MB Flash, 32 MB SDRAM

Ntuziaka ojiji ngwaahịa

1. Iji ngwa nbipute

Iji malite iji EasyCoder PD42 Printer, soro ndị a
nzọụkwụ:

Jikọọ ngwa nbipute na sistemụ gị site na iji nke kwesịrị ekwesị
interface (USB, Serial, Parallel, ma ọ bụ Ethernet).

Ibunye mgbasa ozi n'ime ngwa nbipute dịka achọrọ
ọnọdụ ọrụ (Tear-off or Peel-off).
Tinye ngwa nbipute na isi iyi ike.
Bipụta akara ule iji hụ na ngwa nbipute na-arụ ọrụ
nke ọma.

Mepụta ma bipụta akara maka mkpa gị.

2. Ịwụnye ngwa nbipute

Tupu iji EasyCoder PD42 Printer, ịkwesịrị ịwụnye ya
nke ọma. Soro usoro ndị a:

Jikọọ ngwa nbipute na sistemụ gị

Iji jikọọ ngwa nbipute na sistemụ gị, jiri otu n'ime ndị a
usoro:

Ijikọ ngwa nbipute site na eriri USB

Chọta ọdụ ụgbọ mmiri USB na kọmputa gị.
Jikọọ otu nsọtụ eriri USB na ọdụ ụgbọ USB na
ngwa nbipute.
Jikọọ nsọtụ nke ọzọ nke eriri USB na ọdụ ụgbọ USB na gị
kọmputa.

Ijikọ ngwa nbipute Site na Port Serial

Chọta serial port na kọmputa gị.
Jikọọ otu njedebe nke eriri serial na ọdụ ụgbọ mmiri dị na
ngwa nbipute.
Jikọọ nsọtụ nke ọzọ nke serial cable na ọdụ ụgbọ mmiri na
kọmputa gị.

Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Parallel

Chọta ọdụ ụgbọ mmiri ahụ na kọmputa gị.
Jikọọ otu nsọtụ nke eriri ahụ na ọdụ ụgbọ mmiri yiri ya
ngwa nbipute.
Jikọọ nsọtụ nke ọzọ nke eriri ahụ na ntukota
Port na kọmputa gị.

Ijikọ ngwa nbipute na netwọkụ

Jikọọ eriri Ethernet na ọdụ ụgbọ mmiri Ethernet na
ngwa nbipute.
Jikọọ nsọtụ ọzọ nke eriri Ethernet na netwọk gị
mgba ọkụ ma ọ bụ rawụta.

N'idebata Media

Ka ibunye mgbasa ozi n'ime EasyCoder PD42 Printer, soro ndị a
nzọụkwụ:

Na-eburu mgbasa ozi maka ịrụ ọrụ anya mmiri ( kwụ ọtọ-site).

Mepee mkpuchi mgbasa ozi.
Hazie ntuziaka mgbasa ozi ka ọ dakọọ obosara nke mgbasa ozi gị.

Tinye akwụkwọ mpịakọta ma ọ bụ mgbasa ozi-mpịakọta n'ime ngwa nbipute, hụ na
a kwadoro ya na ndị nduzi.
Mechie mkpuchi mgbasa ozi.

Na-ebu ihe mgbasa ozi maka ịrụ ọrụ npụpụ (nkwụsị onwe).

Mepee mkpuchi mgbasa ozi.
Hazie ntuziaka mgbasa ozi ka ọ dakọọ obosara nke mgbasa ozi gị.

Tinye eriri isi nke mgbasa ozi site na bee-apụ
usoro.
Mechie mkpuchi mgbasa ozi.

Na-ebunye Ribbon Nfefe Thermal

Ọ bụrụ na ị na-eji mbipụta mbufe thermal, ị ga-ebunye ya
rịbọn nyefe thermal. Soro usoro ndị a:

Mepee mgbakọ printhead.
Fanye isi rịbọn n'elu eriri ọkọnọ rịbọn.
Mee rịbọn ahụ site na usoro mbipụta akwụkwọ.
Tinye eriri rịbọn na-ebuga na isi rịbọn.
Mechie mgbakọ printhead.

Ịtinye ngwa nbipute

Mgbe jikọọ ngwa nbipute na gị usoro na loading na
mgbasa ozi, tinye ngwa nbipute na isi iyi ike site na iji ihe enyere
ike eriri.

Mpempe akwụkwọ nyocha

Iji hụ na ngwa nbipute na-arụ ọrụ nke ọma, ị nwere ike ibipụta
akara ule. Soro usoro ndị a:

Gbaa mbọ hụ na etinyere ngwa nbipute na mgbasa ozi wee jikọọ ya
sistemụ gị.
Pịa ma jide bọtịnụ "Nri" ruo mgbe ngwa nbipute malitere
obibi akwụkwọ.

Lelee akara ndị ebipụtara maka nsogbu ọ bụla.

Ịmepụta na ibipụta akara

Iji mepụta ma bipụta akara site na iji EasyCoder PD42 Printer,
soro usoro ndị a:

Wụnye ọkwọ ụgbọala ngwa nbipute na kọmputa gị (tụ aka na
nyere akwụkwọ).

Mepee ngwanrọ imewe labelụ na kọmputa gị.
Mepụta ma ọ bụ bubata nhazi akara.
Họrọ EasyCoder PD42 ngwa nbipute dị ka ngwaọrụ obibi.
Tupuview akara labelụ ma mee ihe ọ bụla dị mkpa
mgbanwe.
Zipu nhazi akara na ngwa nbipute maka ibipụta.

3. Ịhazi ngwa nbipute

Iji hazie ntọala EasyCoder PD42 Printer, soro
usoro ndị a:

Nweta menu nhazi ngwa nbipute site na ịpị "NchNhr"
bọtịnụ na ngosi nke ngwa nbipute.
Jiri igodo akụ gaa na menu.
Họrọ nhọrọ nhazi achọrọ.
Gbanwee ntọala dịka ihe ị chọrọ si dị.
Chekwaa mgbanwe ndị ahụ wee pụọ na nchịkọta nhọrọ nhazi.

FAQ

Ajụjụ: Enwere m ike iji ngwa nbipute EasyCoder PD42 na ma thermal
nyefee na eduzi thermal media?

A: Ee, ngwa nbipute na-akwado ma mbufe thermal na kpọmkwem
teknụzụ obibi okpomọkụ. Ị nwere ike ịgbanwe n'etiti ụdịdị abụọ ahụ
dabere na mkpa gị.

Q: Gịnị bụ kacha ebipụta ọsọ nke EasyCoder PD42
Onye nbipute?

A: The ngwa nbipute nwere ike ibi na a kacha ọsọ nke 6 sentimita (152 mm)
kwa nkeji, na-ahụ na mmepụta akara ngwa ngwa na nke ọma.

Ajụjụ: Kedu ka m ga-esi hichaa isi mbipụta nke EasyCoder PD42
Onye nbipute?

A: Iji hichaa isi akwụkwọ, jiri akwa dị nro ma ọ bụ swab owu
tinye ya na mmanya isopropyl. Jiri nwayọọ hichaa elu printhead
iji wepụ ihe ọ bụla irighiri ihe ma ọ bụ ihe fọdụrụnụ.

View Fullscreen

Ntuziaka onye ọrụ
EasyCoder® PD42 ngwa nbipute

Ụlọ ọrụ Intermec Technologies Corp
Isi ụlọ ọrụ zuru ụwa ọnụ 6001 36th Ave.W. Everett, WA 98203 USA
www.intermec.com
Enyere ozi dị n'ime ebe a naanị maka inye ndị ahịa ohere ka ha rụọ ọrụ na akụrụngwa arụpụtara Intermec na agaghị ahapụ ya, mepụtagharị ma ọ bụ jiri ya mee ihe maka ebumnuche ọ bụla na-enweghị ikike ederede nke Intermec Technologies Corporation.
Ozi na nkọwapụta dị n'ime akwụkwọ a nwere ike ịgbanwe na-enweghị ọkwa mbụ yana anaghị anọchite anya nkwa n'akụkụ Intermec Technologies Corporation.
© 2007 nke Intermec Technologies Corporation. Ikike niile echekwabara.
Okwu Intermec, akara Intermec, Norand, ArciTech, Akwụkwọ ihe ọṅụṅụ, CrossBar, dcBrowser, Duratherm, EasyADC, EasyCoder, EasySet, Mkpịsị aka, INCA (n'okpuru ikike), igistics, Intellitag, Intellitag Gen2, JANUS, LabelShop, MobileLAN, Picolink, Njikere ịrụ ọrụ, RoutePower, Sabre, ScanPlus, ShopScan, Smart Mobile Computing, SmartSystems, TE 2000, Trakker Antares, na Vista kwadoro bụ ụghalaahịa ma ọ bụ ụghalaahịa edenyere n'akwụkwọ ikikere nke Intermec Technologies Corporation.
Enwere ikikere US na mba ofesi yana patent US na mba ofesi na-echere.

EasyCoder PD42 Ntuziaka onye nbipute

ọdịnaya
Tupu Ị Malite. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Ozi nchekwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Ọrụ na Nkwado zuru ụwa ọnụ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Ozi akwụkwọ ikike . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii Web Nkwado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Nkwado ekwentị . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . viii Onye Kwesịrị ịgụ akwụkwọ ntuziaka a . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix Akwụkwọ ndị metụtara . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix
1 Iji ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Na-ewebata ngwa nbipute EasyCoder PD42. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Atụmatụ nke ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 N'ihu View nke ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Azu View nke ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Mgbasa ozi na usoro mbipụta. . . . . . . . . . . . . . . . . . . . . . . . . 4 Firmware. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Na-arụ ọrụ na bọtịnụ Bipụta na ihe ngosi LED. . . . . . . . . . . . . . . . . . . . . . . . . 6
Na-arụ ọrụ na Ngosipụta na igodo dị nro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Ịwụnye ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Ijikọ ngwa nbipute na sistemụ gị. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Ijikọ ngwa nbipute site na eriri USB. . . . . . . . . . . . . . . . . . 10 Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Serial. . . . . . . . . . . . . . . . . . . . . 11 Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Parallel. . . . . . . . . . . . . . . . . . . . 11 Ijikọ ngwa nbipute na netwọkụ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Jikọọ Peripherals Site USB Host . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ijikọ ngwaọrụ nchekwa oke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ijikọ ahụigodo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Ijikọ ihe nyocha koodu mmanya. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Ijikọ ọdụ USB. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Na-ebu mgbasa ozi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Na-ebufe mgbasa ozi maka ịrụ ọrụ anya mmiri ( kwụ ọtọ-site). . . . . . . . . . . . 14 Na-ebufe mgbasa ozi maka ịrụ ọrụ npụpụ (nkwụsị onwe). . . . . . . . . . . . . . . . . . . 17

EasyCoder PD42 Ntuziaka onye nbipute

iii

Na-ebunye Ribbon Nfefe Thermal. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
Ịtinye ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Mpempe akwụkwọ nyocha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Ịmepụta na ibipụta akara. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
3 Ịhazi ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ịghọta Steeti Bibiri . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Ịghọta Usoro mmalite nke ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Na-agbanwe ntọala nhazi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31 Na-agbanwe ntọala nhazi site na ngosi. . . . . . . . . . . . . . . . . 31 Na-agbanwe ntọala nhazi na PrintSet 4. . . . . . . . . . . . . . . . . . . 33 Na-agbanwe ntọala nhazi site na ibe obibi ngwa nbipute. . . . . . . . 33 Ịgbanwe Ntọala Nhazi Iji Ahịrị Iwu. . . . . . . . . . . 33
Na-agba ọsọ Testmode na agbatịkwuwo ọnọdụ ule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Ọnọdụ ule na-agba ọsọ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34 Ọnọdụ ule agbatịkwuru . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Ịkwalite ngwa ngwa . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
4 Ịchọpụta nsogbu na ijikwa ngwa nbipute. . . . . . . . . . . 39
Nsogbu arụ ọrụ ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Nsogbu Bipụta Ogo. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
Ịchọpụta nsogbu nkwurịta okwu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Iji akara nyocha (Mkpịsị aka mkpịsị aka) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 Iji Dumpmode (IPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Nkwado ngwaahịa kọntaktị. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Na-edozi ngwa nbipute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 igbochi rịbọn wrinkling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Na-ehichapụ Mgbasa ozi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Na-edozi isi mbipụta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Na-edozi nguzozi isi nbipụta. . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 Na-edozi nrụgide isi mbipụta. . . . . . . . . . . . . . . . . . . . . . . . . . . 51

EasyCoder PD42 Ntuziaka onye nbipute

Na-edozi ahịrị ntụpọ Printhead. . . . . . . . . . . . . . . . . . . . . . . . . . . 51 Na-edozi ihe mmetụta ọdịiche nke Label. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Na-edobe ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56 Na-ehicha isi ihe nbipụta. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Na-ehicha ogige mgbasa ozi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58 Na-ehicha Mpụga nke ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Nkọwapụta, Interface, na Nhọrọ. . . . . . . . . . . . . . . . . . . . . 59
Nkọwapụta ngwa nbipute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Ọnụ ụzọ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 RS-232 Oghere Usoro Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 Protocol. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 USB Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63 USB interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 USB Host interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 EasyLAN Ethernet Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65 Parallel IEEE 1284 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 USB interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Nhọrọ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 EasyLAN Ethernet Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66 Parallel IEEE 1284 Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Cutter Kit. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Ntugharị ime. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 Kit isi akwụkwọ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 ezigbo oge elekere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
Nkọwapụta mgbasa ozi B. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Nha Mpịakọta Mgbasa ozi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70 isi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Akwụkwọ mpịakọta 70 nke ime. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Nha Ribbon 70 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
Ụdị akwụkwọ na nha . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 eriri anaghị ejikọta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72 Mwepu na-ejide onwe ya. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 Akara nrapado onwe. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Tiketi nwere oghere. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tiketi 76 nwere Black Mark. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

EasyCoder PD42 Ntuziaka onye nbipute

Ntọlite C Ntọala (Mkpịsị aka mkpịsị aka) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Nkọwa nhazi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Na-agagharị n'osisi Mbido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82 Ntọala nkwurịta okwu Oghere Usoro. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87 Com Mbido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 Ntọala emulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89 nhazi nhazi nri. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 Mgbasa ozi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91 Bipụta Defs Mbido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Ntọala netwọkụ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
D Ntọala Ntọala (IPL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Nkọwa nhazi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mpempe akwụkwọ nyocha 100 nwere Iwu IPL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Na-agagharị na Osisi Ntọala. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Serial Communication Mbido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Com Mbido. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106 Nnwale/Nhazi ọrụ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107 Ntọala mgbasa ozi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 Nhazi nhazi. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 Ntọala netwọkụ. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113 Ilaghachi na Ntọala ụlọ nrụpụta . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113

EasyCoder PD42 Ntuziaka onye nbipute

Tupu Ị Malite
Tupu Ị Malite
Akụkụ a na-enye gị ozi nchekwa, ozi nkwado teknụzụ, yana isi mmalite maka ozi ngwaahịa agbakwunyere.
Ozi nchekwa
Nchekwa gị dị oke mkpa. Gụọ ma soro ịdọ aka ná ntị na ịdọ aka ná ntị niile dị na akwụkwọ a tupu ijikwa ma rụọ ọrụ Intermec akụrụngwa. Ị nwere ike imerụ ahụ nke ukwuu, yana akụrụngwa na data nwere ike mebie ma ọ bụrụ na ịgbasoghị ịdọ aka ná ntị na ịdọ aka ná ntị nchekwa.
Akụkụ a na-akọwa otu esi amata na ịghọta ịdọ aka ná ntị, ịdọ aka ná ntị, na ndetu ndị dị n'ime akwụkwọ a.
Ịdọ aka ná ntị na-eme ka ị mara maka usoro ọrụ, omume, ọnọdụ, ma ọ bụ nkwupụta nke a ga-edeberịrị nke ọma iji zere ọnwụ ma ọ bụ mmerụ ahụ dị njọ nye ndị na-arụ ọrụ na ngwa ahụ.
Ịkpachara anya na-eme ka ị mata usoro ọrụ, omume, ọnọdụ, ma ọ bụ nkwupụta nke a ga-ahụrịrị nke ọma iji gbochie mmebi ma ọ bụ mbibi akụrụngwa, ma ọ bụ nrụrụ aka ma ọ bụ mfu data.
Mara: Ihe ndetu na-enyekwu ozi gbasara isiokwu ma ọ bụ nwee ntuziaka pụrụ iche maka ijikwa otu ọnọdụ ma ọ bụ ọnọdụ ọnọdụ.
Ọrụ na Nkwado zuru ụwa ọnụ
Ozi akwụkwọ ikike
Iji ghọta akwụkwọ ikike maka ngwaahịa Intermec gị, gaa na Intermec web saịtị na www.intermec.com wee pịa Ọrụ & Nkwado> Akwụkwọ ikike.

EasyCoder PD42 Ntuziaka onye nbipute

vii

Tupu Ị Malite

Nkwenye nke akwụkwọ ikike: The sampA na-ewepụta koodu lebanyere n'ime akwụkwọ a maka naanị ntụnye aka. Koodu ahụ apụtaghị na mmemme zuru oke, nwalere. Enyere koodu ahụ "dị ka ọ dị na mmejọ niile." Akwụsịla akwụkwọ ikike niile nke ọma, gụnyere akwụkwọ ikike nke ikere ahịa yana mma maka otu ebumnuche.
Web Nkwado
Gaa na Intermec web saịtị na www.intermec.com iji budata akwụkwọ ntuziaka anyị dị ugbu a (na PDF). Iji tụọ ụdị akwụkwọ ntuziaka Intermec ebipụta, kpọtụrụ onye nnọchi anya Intermec ma ọ bụ onye nkesa mpaghara gị.
Gaa na isi ihe ọmụma teknụzụ Intermec (Knowledge Central) na intermec.custhelp.com ka ị gụgharịaview ozi teknụzụ ma ọ bụ ịrịọ nkwado teknụzụ maka ngwaahịa Intermec gị.
Nkwado ekwentị
Ọrụ ndị a dị site na Intermec.

Ọrụ

Nkọwa

Na USA na Canada kpọọ 1-800755-5505 wee họrọ nhọrọ a

Nye iwu Intermec · Nye iwu.

ngwaahịa

Jụọ maka ihe dị

ịtụ.

1 wee họrọ 2

Nye iwu akara nbipute Intermec na

mgbasa ozi

rịbọn.

1 wee họrọ 1

Nye akụrụngwa akụrụngwa

Nye akụrụngwa akụrụngwa.

1 ma ọ bụ 2 wee họrọ 4

Nkwado ndị teknuzu

Gwa nkwado teknụzụ

2 wee họrọ 2

gbasara ngwaahịa Intermec gị.

viii

EasyCoder PD42 Ntuziaka onye nbipute

Tupu Ị Malite

Ọrụ Ọrụ
Nkwekọrịta ọrụ

Nkọwa

Na USA na Canada kpọọ 1-800755-5505 wee họrọ nhọrọ a

Nweta ikike nloghachi 2 wee họrọ nọmba 1 maka ịrụzi ebe ọrụ ikike.
Rịọ onye ọrụ nrụzi na saịtị.

Jụọ maka ihe dị

1 ma ọ bụ 2 na mgbe ahụ

nkwekọrịta.

họrọ 3

· Weghachite nkwekọrịta.

Jụọ maka ịrụzi ụgwọ ịgba ụgwọ

ma ọ bụ akwụkwọ ọnụahịa ọrụ ndị ọzọ

ajụjụ.

Na mpụga USA na Canada, kpọtụrụ onye nnọchi anya Intermec nke mpaghara gị. Ka ịchọọ onye nnọchi anya mpaghara gị, site na Intermec web saịtị, pịa Kọntaktị.
Onye kwesịrị ịgụ akwụkwọ ntuziaka a
Ntuziaka onye ọrụ a bụ maka onye na-ahụ maka ịwụnye, iji, hazie na idobe ngwa nbipute PD42.
Akwụkwọ a na-enye gị ozi gbasara njirimara PD42, yana otu esi arụnye, hazie, rụọ ọrụ, kwado ya na idozi ya.
Akwụkwọ ndị emetụtara
Tebụl a nwere ndepụta nke akwụkwọ Intermec metụtara yana nọmba akụkụ ha.

Aha akwụkwọ
Akwụkwọ ntuziaka Intemec Fingerprint Programmer's Reference Manual IPL Programmer's Reference Manual EasyLAN User's Guide

Nọmba akụkụ
937-005-xxx 066396-xxx 1-960590-xx

Intermec web saịtị na www.intermec.com nwere akwụkwọ anyị (dị ka PDF files) nke ị nwere ike ibudata n'efu.

EasyCoder PD42 Ntuziaka onye nbipute

Tupu Ị Malite

Ka ibudata akwụkwọ
1 Gaa na Intermec web saịtị na www.intermec.com.
2 Pịa Ọrụ & Nkwado > Akwụkwọ ntuziaka.
3 Na mpaghara ngwaahịa, họrọ ngwaahịa ịchọrọ ibudata.
Iji tụọ ụdị akwụkwọ ntuziaka Intermec ebipụta, kpọtụrụ onye nnọchi anya Intermec ma ọ bụ onye nkesa mpaghara gị.

EasyCoder PD42 Ntuziaka onye nbipute

1 Iji ngwa nbipute
Isiakwụkwọ a gụnyere akụkụ ndị a: · Ewebata EasyCoder PD42 Printer · Akụkụ nke ngwa nbipute · Na-arụ ọrụ na bọtịnụ Bipụta na ihe ngosi LED · Na-arụ ọrụ na ngosipụta na igodo dị nro

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 1 - Iji ngwa nbipute
Na-ewebata ngwa nbipute EasyCoder PD42
The EasyCoder PD42 ngwa nbipute bụ ihe a pụrụ ịdabere na ya na ngwa nbipute dabara adaba maka ngwa ndị na-ajụ obere ọrụ n'ichepụta, njem na gburugburu ụlọ nkwakọba ihe. Ọ nwere chassis na mkpuchi ọla niile, igwe eji ebi akwụkwọ egosipụtara, yana ngwa elektrọn siri ike na-enye ike, arụmọrụ na ntụkwasị obi. Ọ na-egosipụta interface onye ọrụ nwere ọgụgụ isi nwere nnukwu ihe ngosi eserese yana bọtịnụ mmemme.
Atụmatụ nke ngwa nbipute
Akụkụ a na-akọwa mpụta nke ngwa nbipute, njikọ, na ngalaba mgbasa ozi.
N'ihu View nke ngwa nbipute

Gosipụta igodo dị nro (5) ọkụ ọkụ (4)
Bọtịnụ bipụta
N'ihu View

Ọnụ ụzọ akụkụ

EasyCoder PD42 Ntuziaka onye nbipute

Azu View nke ngwa nbipute

Isi nke 1 - Iji ngwa nbipute
Nri maka mgbasa ozi mpụga

Ọnụ ụzọ azụ azụ View

Akara igwe
USB ọdụ ụgbọ mmiri Ethernet RJ-45 ọdụ ụgbọ mmiri USB ọdụ ụgbọ mmiri MAC adreesị akara RS-232 Oghere Usoro ọdụ ụgbọ mmiri
IEEE 1284 ọdụ ụgbọ mmiri CompactFlash yiri ya
O
Mgbanwe ọkụ
Igwe ọkụ ọkụ AC

Azu View: Njikọ

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 1 - Iji ngwa nbipute
Ụlọ mgbasa ozi na usoro mbipụta

Ink ọnọdụ lever Edge ndu

Ụlọ mgbasa ozi

Mgbasa mgbasa ozi mgbasa ozi
Ribbon ọkọnọ shaft Ribbon rewind shaft

Igbe nguzozi Printhead

Ihe mmetụta ewepụtara akara

Thermal Tear bar printhead

Usoro mbipụta

Mkpịrị rịbọn
Ntugharị isi nbipụta
Ogwe nri mgbasa ozi

EasyCoder PD42 Ntuziaka onye nbipute

Firmware

Isi nke 1 - Iji ngwa nbipute
Ihe nbipute PD42 gị na-abịa na akara mkpịsị aka ma ọ bụ IPL (Intermec Printer Language) firmware. Nhọrọ nke firmware na-emetụta ọrụ nke ngwa nbipute yana otu esi emekọrịta ya. Akwụkwọ ntuziaka a nwere ozi na-emetụta naanị ụdị ngwa ngwa, yabụ a na-atụ aro ka ị mara onwe gị nke ọma na PD42 iji mara ma ọ na-agba akara mkpịsị aka ma ọ bụ IPL.
Ụdị na ụdị firmware dị ugbu a na-egosipụta na LCD nke ngwa nbipute, mgbe ngwa nbipute na-arụ ọrụ nke ọma yana na ọnọdụ "adịghị arụ ọrụ" (na-echere ọrụ mbipụta).
Mkpịsị aka 10.1.0

Nwalee

Window ngosipụta nke PD42 na-agba ọsọ firmware Fingerprint.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 1 - Iji ngwa nbipute
Na-arụ ọrụ na bọtịnụ Bipụta na ihe ngosi LED
Bọtịnụ na-acha anụnụ anụnụ dị n'ihu panel bụ bọtịnụ Bipụta. Ọrụ bụ isi nke bọtịnụ Bipụta bụ ịzụ mgbasa ozi na kwụsịtụ ọrụ mbipụta. Agbanyeghị, ọrụ ahụ dịgasị iche dabere na steeti onye nbipute dị, yana ngwa ngwa ọ na-agba. A kọwara nke ọma ihe a niile na “Understanding Printer States” na ibe 26.
Enwere ọkụ ọkụ anọ (Light Emitting Diodes) gbara bọtịnụ Bipụta.

LEDs na bọtịnụ Bipụta
Igwe ọkụ njikwa

Akara

Ike ikanam

Agba ndụ ndụ

Dị njikere/Data

Akwụkwọ ndụ akwụkwọ ndụ

Njehie

Uhie

Njikere na-arụ ọrụTM Blue

Ngosipụta ike ọrụ
Ejikerela ngwa nbipute
Ngosipụta njehie
Ihe ngosi Intermec dị njikere ịrụ ọrụTM

Ihe ngosi LED anọ a na-agbanye, gbanyụọ, ma ọ bụ na-egbuke egbuke dabere na steeti onye nbipute dị. Igwe ọkụ ọkụ () na-adị mgbe niile maka steeti niile ma e wezụga Power Off.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 1 - Iji ngwa nbipute
Igwe ọkụ na-acha anụnụ anụnụ dị njikere ịrụ ọrụ ( ) na-egosi ọkwa ọrụ nke ngwa nbipute. N'okwu dị mfe, a na-agbanye ya mgbe ngwa nbipute na-arụ ọrụ. Atọọla ihe ngosi ka ọ gbanye ọkụ mgbe ngwa nbipute na-enweta data ma ọ bụ n'okpuru ụfọdụ ọnọdụ njehie “dị nro”, maka example mgbe ngwa nbipute na-eche adreesị IP site na netwọk, mgbe ebuliri isi mbipụta, ma ọ bụ mgbe etinyere mgbasa ozi na-ezighi ezi. Ọ na-enwukwa mgbe ngwa nbipute nọ na ọnọdụ Mbido, Testmode, na Extended Testmode (lee Isi nke 3, “Configuring the Printer.”).
Mgbe enwere mmejọ dị njọ karị, ihe ngosi ahụ na-agbanyụ kpamkpam, LED Error LED ( ) na-agbanye ma ọ bụ na-egbuke egbuke. Enwere ọtụtụ ọnọdụ nwere ike ịkpata omume a; maka enyemaka, lee Isi nke 4, “Nchọpụta nsogbu na Mmezi.”
Igwe ọkụ dị njikere/Data LED ( ) na-agbanye, gbanyụọ ma ọ bụ na-egbuke egbuke dabere na ọnọdụ nke ngwa nbipute ugbu a. Enwere ike ịhụ nkọwa nke ọma gbasara omume a na “Understanding Printer States” na ibe 26.
Na-arụ ọrụ na Ngosipụta na igodo dị nro
Ngosipụta ahụ na-ekwupụta ozi zuru ezu gbasara ọnọdụ ngwa nbipute ugbu a. Iji ngosi, ngwa nbipute na-agwa gị ma ọ bụrụ na otu mperi emeela ma ọ bụ ọ na-eche ntinye n'aka gị.

Ozi ederede ma ọ bụ njehie

Ọnọdụ ugbu a (Ntọala)

Igodo dị nro na-arụ ọrụ

Ebe dị iche iche nke ngosi na igodo dị nro.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 1 - Iji ngwa nbipute
N'okpuru ngosi ahụ bụ bọtịnụ ise na-arụ ọrụ dị ka "igodo dị nro," nke pụtara na ọrụ nke bọtịnụ ọ bụla dabere na ọnọdụ nke ngwa nbipute. E gosiputara ọrụ a na obere akara ngosi dị n'elu igodo n'onwe ya.
Ị nwere ike iji bọtịnụ ahụ maka ihe ndị dị ka ịkwụsịtụ ọrụ ebipụta, na-agba ọsọ testfeed ma ọ bụ ịgbanwe ntọala ntọala.
Mara: Ọ bụrụ na ngwa nbipute na-eji ngwa mkpịsị aka mkpịsị aka, ọ bụ ngwa na-achịkwa ohere ịnweta ọnọdụ ntọala.

A kọwara ọrụ nke igodo dị nro ọ bụla n'okpuru.

Ọrụ igodo dị nro

Igodo dị nro F1 ruo F5

Ọrụ
Akọwapụtara site na ngwa ntinye mkpisiaka Tinye/Wepụ Ntọala
Nri

Nwalee

Nri ule
Banye/ Wepụ i-mode aka ekpe/steeti gara aga tinye/nabata/họrọ

Ọrụ igodo dị nro Right/steeti na-esote
Dezie uru Wepụ edezi/kagbuo/wepụ ụdị ule/wepụ dumpmode Wetuo ọnụọgụ ahọpụtara
Mee ka nkeji ahọpụtara kwụsịtụ
Gaa n'ihu Chekwa na file

EasyCoder PD42 Ntuziaka onye nbipute

2 Ịwụnye ngwa nbipute
Isiakwụkwọ a nwere ngalaba ndị a: · Ijikọ ngwa nbipute na sistemụ gị · Ijikọ ihe n'akụkụ site na USB Host · Loading Media · Loading thermal Transfer Ribbon · Ịtinye na ngwa nbipute · Mpempe akwụkwọ nyocha · Imepụta na ibipụta akara.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
Jikọọ ngwa nbipute na sistemụ gị
Enwere ọtụtụ ụzọ ị ga-esi jikọọ PD42 na sistemụ gị. Dị ka ọkọlọtọ, ngwa nbipute nwere:
Otu eriri USB Ụdị B maka ọdụ ụgbọ mmiri USB.
Otu njikọ USB Ụdị A maka ọdụ ụgbọ mmiri nnabata USB.
Otu oghere 9-pin D-style subminiature (DB9) maka ọdụ ụgbọ mmiri RS-232.
Ọhụụ nhọrọ gụnyere:
Otu oghere 36-pin maka ọdụ ụgbọ mmiri (IEEE 1284).
Otu oghere RJ-45 maka njikọ netwọkụ Ethernet.
Enwere ike ịhụ ozi dị na oghere na ụdị njikọ na Ihe Odide A, “Nkọwapụta, Ntugharị, na Nhọrọ.”
Mara: Enweghị ike iji USB na Parallel IEEE 1284 n'otu oge. Họrọ interface na-arụ ọrụ na Ntọala (lee "Ntọala Nhazi Ịgbanwe" na ibe 31).
Enwere advantages na disadvantages jikọtara na nke ọ bụla n'ime ndị a interfaces, nke a kọwara na ndị na-esonụ ngalaba. Ntọlite sistemụ gị ugbu a nwere ike ịgwa gị usoro njikọ kacha dabara adaba.
Ijikọ ngwa nbipute site na eriri USB
Iji jiri njikọ USB, ịkwesịrị ịwụnye ngwanrọ Intermec InterDriver na kọmputa gị. Iji hụ na ị nwetara ụdị kachasị ọhụrụ, lelee Intermec web saịtị mbụ. Enwere ike ịhụ ngwanro a na CD PrinterCompanion yana ntuziaka maka otu esi etinye ya. Ngwa USB adabaghị maka njikọ ọnụ ma yabụ na ọ bụghị maka mmemme.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
Ijikọ ngwa nbipute Site na Port Serial
Ị nwere ike iji njikọ serial na LabelShop ma ọ bụ Intermec InterDriver. Ịnwekwara ike iji ya ziga iwu ozugbo na ngwa nbipute site na njikọ ọnụ, dịka ọmụmaatụ na Telnet. Ntọala nzikọrịta ozi nke ndabara nke ngwa nbipute bụ: ọnụego baud 9600, ibe n'ibe data 8, enweghị oke, 1 nkwụsịtụ na enweghị njikwa mgbaba. Mgbakwunye C na D nwere ozi gbasara parampat nhazi nzikọrịta ozi maka IPL na akara mkpịsị aka, otu n'otu.
Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Parallel
Ị nwere ike iji njikọ yiri LabelShop ma ọ bụ Intermec InterDriver. Ọdụ ụgbọ mmiri ahụ yiri ya na-akwado Windows plug-play yana ọkwa ọkwa agbakwunyere site na IEEE 1284 nibble ID mode. Ejighị eriri na ngwa ahụ.
Ijikọ ngwa nbipute na netwọkụ
Site na kaadị EasyLAN Ethernet nhọrọ etinyere na PD42 gị, ị nwere ike ịtọ ya dị ka ngwa nbipute netwọkụ. A na-edozi ngwa nbipute ka ọ weghachite nọmba IP na-akpaghị aka na netwọk (DHCP) ozugbo agbanyere ya. Ị nwere ike iji njikọ netwọkụ na LabelShop ma ọ bụ Intermec InterDriver. Ịnwekwara ike iji ya ziga iwu ozugbo na ngwa nbipute site na njikọ ọnụ (Telnet), ma ọ bụ ị nwere ike izipu ntuziaka site na FTP. Maka njikọ ọnụ, ọ na-eji Raw TCP protocol site na ọdụ ụgbọ mmiri 9100.
Iji jikọọ PD42 na netwọk gị
1 Tinye eriri Ethernet ejikọrọ n'ọdụ ụgbọ mmiri Ethernet dị n'azụ ngwa nbipute.
2 Gbanwuo ngwa nbipute. Chere maka LED njikere ịrụ ọrụ na-acha anụnụ anụnụ ka ọ kwụsị ịcha ọkụ, yana maka ozi "njehie nhazi IP" ga-apụ na ihuenyo.
3 Tinye ọnọdụ i site na ịpị ( ).
i-mode cycles site na interfaces arụnyere na ngwa nbipute na nkeji nkeji ise na-egosiputa ha na ihuenyo. A na-egosipụta adreesị IP n'okpuru net1: na mkpịsị aka na net na IPL.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
4 Tinye adreesị IP nke ngwa nbipute na mpaghara adreesị nke gị web ihe nchọgharị (maka example http://255.255.255.001). Nke a na-ewelite ibe obibi nke ngwa nbipute, ebe enwere ike ịlele ma gbanwee ntọala ngwa nbipute dị iche iche. Ịgbanwe ntọala chọrọ aha nbanye na okwuntughe: na ndabara, ndị a ka atọrọ na "admin" na "pass" n'otu n'otu.
Biko rụtụ aka na ntuziaka onye ọrụ EasyLAN (P/N 1-960590-xx) maka ozi ndị ọzọ gbasara otu esi edozi ma rụọ ọrụ PD42 na gburugburu netwọk gị.
Ọ bụrụ na netwọk gị anaghị ekenye nọmba IP na-akpaghị aka, ma ọ bụ ihe ngosi Njikere na-arụ ọrụ na-egbuke egbuke iji gosi njehie netwọk, ị nwere ike iji PrintSet 4 (nke dị na CD PrinterCompanion) iji dozie ntọala netwọk. N'aka nke ọzọ, guzobe njikọ ọnụ site na interface serial wee jiri iwu ntọala mkpịsị aka. Hụ “Ntọala Nhazi Na-agbanwe” na ibe 31, ma ọ bụ rụtụ aka na ntuziaka ntụnye aka Intermec Fingerprint Programmer (P/N 937-005-xxx).
Jikọọ Peripherals Site USB Host
Ihe nleba anya USB na-akwado ngwaọrụ mpụga ndị a:
Ngwaọrụ nchekwa oke
· Ahụigodo
Ihe nyocha koodu mmanya
· eriri USB
Ijikọ ngwaọrụ nchekwa oke
Ị nwere ike iji ngwaọrụ nchekwa oke USB (ụdị "thumbdrive" ma ọ bụ "dongle") iji chekwaa mkpụrụedemede na onyonyo ndị ọzọ. Ịnwekwara ike iji ngwaọrụ ahụ kwalite firmware gị (lee "Emelite Firmware" na ibe 38).
Jikọọ ahụigodo
Ị nwere ike iji ahụigodo USB mpụga ka:
Ntinye data n'ime ngwa akara mkpịsị aka. Ụfọdụ ngwa nwere ike ịchọ ntinye dị mgbagwoju anya site n'aka ndị ọrụ karịa nfe nke bọtịnụ dị mfe.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
· jikwaa ntọlite na mkpịsị aka mkpisi aka/ Direct Protocol na IPL. N'ụdị ahụigodo arụnyere arụnyere, a na-edobe igodo akụ dị na ahụigodo ka ọ rụọ ọrụ elu/ala/nri/aka ekpe na menu ntọala. Igodo ọrụ ise F1-F5 kwekọrọ na igodo dị nro ise dị n'ihu panel, malite n'aka ekpe. Igodo Tinye ga-enwe otu ọrụ itinye/nkwenye.
Ihe nbipute na-abịa na arụnyere nhazi ahụigodo anọ (US, Swedish, French na German).
Ka ịgbanwee okirikiri nhọrọ ukwuu ahụigodo
1 Tinye eriri USB gị n'ime njikọ USB dị n'azụ ngwa nbipute.
2 Gbanwuo ngwa nbipute.
3 Pịa Ntọala ( ).
4 Gaa na COM > KEYBOARD USB.
5 Họrọ okirikiri nhọrọ ukwuu ahụigodo.
6 Wepụ ntọala site na ịpị ( ).
Ndị ọrụ akara mkpịsị aka nwere ike ịmepụta okirikiri nhọrọ ukwuu nke ha. Maka enyemaka, lee akwụkwọ ntuziaka ntụnye aka nke Programmerprint (P/N 937-005-xxx).
Ijikọ ihe nyocha koodu Bar
Mara: Naanị ndị nbipute na-arụ firmware Fingerprint nwere ike iji nyocha koodu mmanya.
Ị nwere ike ijikọ ihe nyocha koodu mmanya nke HID (Ngwaọrụ Interface mmadụ) na ngwa nbipute. Ihe nyocha ahụ ga-eziga data na ngwaọrụ "console:" n'otu ụzọ ahụ dị ka ahụigodo USB. Enwere ike iji data a na ngwa akara mkpịsị aka.
Maapụ ahụigodo ahọpụtara na ntọlite (lee n'elu) na-emetụtakwa ihe nyocha ejikọrọ.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
Jikọọ Hub USB
Igwe USB na-eme ka enwere ike ijikọ ọtụtụ ngwaọrụ USB na ngwa nbipute n'otu oge.
Cheta na: Naanị otu n'ime ngwaọrụ ejikọrọ na eriri USB nwere ike ịbụ ngwaọrụ nchekwa oke, na naanị otu ngwaọrụ nwere ike ịbụ Ngwaọrụ Interface mmadụ (keyboard ma ọ bụ ihe nyocha koodu mmanya).
N'idebata Media
EasyCoder PD42 nwere ike ibipụta na akara, tiketi, tags, na ngwaahịa na-aga n'ihu n'ụdị dị iche iche. Rụtụ aka na mgbakwunye B, “Nkọwa mgbasa ozi” maka ozi zuru ezu gbasara ụdị mgbasa ozi, akụkụ mgbasa ozi na nkọwapụta mgbasa ozi ndị ọzọ.
Na-eburu mgbasa ozi maka ịrụ ọrụ anya mmiri ( kwụ ọtọ-site).
Akụkụ a na-akọwa ikpe ahụ mgbe ejiri aka dọkasịa mgbasa ozi megide mmanya anya mmiri nke ngwa nbipute. A na-akpọkwa usoro a dị ka ibibi akwụkwọ "ziri ezi". Ị nwere ike iji ụdị mgbasa ozi dị iche iche na arụ ọrụ Tear-Off: · Ngwaahịa na-adịghị mma na-aga n'ihu · Ngwaahịa na-aga n'ihu na-ejide onwe ya na liner. ma ọ bụ na-enweghị perforations
Ka ịkwanye mgbasa ozi maka ịrụ ọrụ nkwụsị
1 Mepee ọnụ ụzọ akụkụ nke ngwa nbipute.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
2 Wepụ lever isi mbipụta wee tụgharịa ya na nchegharị elekere. Bulite ntuziaka ndepụta labelụ.
Ntuziaka ndepụta aha
Mpempe akwụkwọ mbipụta 3 Bunye mpịakọta mgbasa ozi n'elu ebe a na-enye mgbasa ozi. Jide n'aka na ị ga-agbanye
ya niile n'ime.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
4 Nyefee usoro mgbasa ozi site na usoro mbipụta.

5 Ọ bụrụ na ị na-eji mgbasa ozi fan-fold, bunye ya n'azụ ihe oriri wee mee ya otu ụzọ ị ga-esi na-eme mpịakọta mgbasa ozi.

6 Tọgharia ntuziaka ndepụta labelụ na lever isi nbipụta.

7 Mechie ọnụ ụzọ akụkụ.

EasyCoder PD42 Ntuziaka onye nbipute

Nwalee

Isi nke 2 - Ịwụnye ngwa nbipute
8 Pịa bọtịnụ Bipụta ka ịkwalite mgbasa ozi (“Nri”). Ọ bụrụ na ị na-agbanwe n'ụdị mgbasa ozi ọhụrụ, dịka ọmụmaatụ na-esi na tiketi nwere oghere gaa na tiketi nwere akara ojii, ị ga-emerịrị “Testfeed” ( ) iji hazie sensọ nke ngwa nbipute.
Na-ebu ihe mgbasa ozi maka ịrụ ọrụ npụpụ (nkwụsị onwe).
Akụkụ a na-akọwa ikpe ahụ mgbe a na-ekewapụta akara nrapado onwe ya na liner ozugbo ibipụtachara. A na-akpọkwa usoro a dị ka ọrụ mgbawa nke onwe. Ihe mmetụta akara akara nwere ike ijide mbipụta nke akara na-esote na batch ruo mgbe ewepụrụ akara dị ugbu a. Ị nwere ike iji akara nrapado onwe ya nwere liner na-arụ ọrụ nkwụsị. Jiri otu usoro ahụ mgbe ị na-etinye usoro mgbasa ozi maka Batch Takeup, yana ihe dị iche na a na-emegharị ma label na liner, na ejighị ihe mmetụta na-ewere akara.
Cheta na: Ụdị ọrụ ndị a chọrọ nkeji ntugharị n'ime, maka ozi ndị ọzọ hụ Ihe Odide A, "Nkọwapụta, Ntugharị, na Nhọrọ."
Ka ịkwanye mgbasa ozi maka ịrụ ọrụ mkpochapụ
1 Wepu mkpịsị aka mkpịsị aka ka iwepu mkpuchi ihu.

2 Mepee ọnụ ụzọ dị n'akụkụ, tinye akwụkwọ mpịakọta mgbasa ozi, wee gaa n'usoro mgbasa ozi site na mkpara ndepụta mgbasa ozi (tụ aka na Nzọụkwụ 1-4 na "Iji Ibu Ibu mgbasa ozi maka ịrụ ọrụ nkwụsị" na ibe 14).

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
3 Tinye akara labelụ site na usoro mbipụta wee laghachi na ngalaba mgbasa ozi.
4 Kechie liner n'akụkụ akwụkwọ mpịakọta ahụ wee kpochie ya n'ebe.
5 Tọgharia ntuziaka ndepụta labelụ na lever isi nbipụta.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
6 Tinyegharịa mkpuchi ihu.

7 Tinye n'akụkụ ala nke ihe mmetụta akpọrọ wee wepụta ya n'ọnọdụ kwụ ọtọ zuru oke.

8 Mechie ọnụ ụzọ akụkụ.
9 Pịa bọtịnụ Bipụta ka ịkwalite mgbasa ozi.
Na-ebunye Ribbon Nfefe Thermal
Mbipụta nnyefe okpomọkụ na-eme ka o kwe omume iji ọtụtụ ihe na-anata ihu ma na-enye mbipụta na-adịgide adịgide nke na-adịchaghị mfe na abụba, kemịkalụ, okpomọkụ, ìhè anyanwụ na ihe ndị ọzọ karịa ibipụta ọkụ ọkụ kpọmkwem. Jide n'aka na ịhọrọ ụdị rịbọn dabara n'ụdị ihe nnata wee guzobe ngwa nbipute ya.
A na-ebukarị rịbọn ahụ n'otu oge dị ka mpịakọta mgbasa ozi ọhụrụ. Maka idoanya, ihe atụ ndị a anaghị egosi mpịakọta mgbasa ozi. Hụ akụkụ ndị gara aga maka ozi gbasara otu esi etinye mgbasa ozi maka ụdị ọrụ gị.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
EasyCoder PD42 nwere ike iji ọnya mbufe rịbọn na-apụta n'akụkụ nwere ink chere ihu ma apụta ma ọ bụ n'ime. Iji chọpụta ụdị rịbọn ị nwere, jiri pen ma ọ bụ ihe ọzọ dị nkọ kpachie rịbọn ahụ megide mpempe akwụkwọ. Ọ bụrụ na ọ hapụ akara, rịbọn gị na-emerụ ink ma ọ bụ ink dị ka ihe nlereanya a si dị.
= Ink n'ime
= Ink pụta
Nwalee iji chọpụta ma rịbọn mbufe gị ọ bụ ink na-emerụ ahụ ma ọ bụ ink pụta.
Ka ibunye rịbọn nyefe ọkụ 1 Mepee ọnụ ụzọ akụkụ nke ngwa nbipute. 2 Wepụ lever nke isi akwụkwọ (1) wee tụgharịa ya na elekere elekere
(2) iji bulie isi akwụkwọ.
1 2

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
3 Madaa mpịakọta rịbọn ahụ n'elu oghere rịbọn akanri, yana isi rịbọn efu na oghere aka ekpe.
4 naanị rịbọn “ink pụta”: dagharịa rịbọn wee tọọ lever ọnọdụ ink dị ka egosiri n'okpuru.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
5 naanị rịbọn “ink n'ime”: gaa na rịbọn wee tọọ eriri ọnọdụ ink dị ka egosiri n'okpuru.
6 Ibunye mgbasa ozi na ngwa nbipute, ọ bụrụ na i mebeghị ya. 7 Malitegharịa ngwa nbipute wee bipụta akara ule (Lee “Nnwale mbipụta
Akara” na ibe 23).
Ịtinye ngwa nbipute
1 Gbaa mbọ hụ na agbanyụrụ ọkụ. 2 Jikọọ eriri ọkụ na ngwa nbipute. 3 Tinye eriri ọkụ n'ime oghere eletrik gị.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
Mpempe akwụkwọ nyocha
Iji chọpụta na ngwa nbipute na-arụ ọrụ nke ọma yana iji nweta nhazi ya ugbu a, ị nwere ike ibipụta akara ule maka ọrụ ngwa nbipute dị iche iche (dịka ọmụmaatụ, ngwaike na nhazi ngwanrọ).
Ka ibipụta otu akara ule site na mmalite
1 Gbaa mbọ hụ na agbanyụrụ ngwa nbipute.
2 Buchie mgbasa ozi dị ka akọwara na "Loading Media" na ibe 14.
3 Pịa ma jide bọtịnụ Bipụta na-acha anụnụ anụnụ.
4 Debe bọtịnụ Bipụta ala, ma gbanye ọkụ ọkụ. Mgbe ihe dị ka sekọnd iri, ngwa nbipute na-abanye na Testmode na atọ nke ihu LEDs na-amalite na-egbuke egbuke n'otu oge.
Window ngosi na-enwu, na ngwa nbipute na-arụ usoro nhazi usoro mgbasa ozi.
5 Gaa n'ihu na ịpị bọtịnụ Bipụta ruo mgbe ngwa nbipute malitere ịnya igwe site na ụdị mgbasa ozi a na-ahọrọ (Gap/Mark/Continuous). Maka enyemaka, lee Ihe Odide B, “Nkọwapụta mgbasa ozi.”
6 Họrọ ụdị mgbasa ozi gị site na ịhapụ bọtịnụ Bipụta n'oge kwesịrị ekwesị.

Họrọ oghere mgbasa ozi

Họrọ akara mgbasa ozi

Họrọ mgbasa ozi na-aga n'ihu

Ihe nbipute ahụ ga-ebipụta ọtụtụ akara ule nwere parampat nhazi ngwa nbipute. Ọ ga-abanye na Dumpmode.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 2 - Ịwụnye ngwa nbipute
7 Pịa bọtịnụ Bipụta otu ugboro, ma ọ bụ pịa Kagbuo ( ) ka ọpụpụ Dumpmode.
Ịmepụta na ibipụta akara
Enwere ọtụtụ ụzọ dị iche iche ị nwere ike isi mepụta akara wee ziga ya na ngwa nbipute gị. Ị nwere ike chepụta akara na Mkpịsị aka ma ọ bụ IPL, jiri ngwaọrụ nhazi akara raara onwe ya nye (dịka LabelShop na XMLLabel), ma ọ bụ jiri ngwanrọ nhazi okwu dịka Microsoft Word. Ọ ga-abụ na ntọala sistemụ gị na nzikọrịta ozi gị (Ethernet, USB, serial or parallel) ga-emetụta nhọrọ nke ngwaọrụ imewe gị. Biko rụtụ aka na akwụkwọ ntuziaka nke ngwa ọrụ nke ọ bụla maka ozi maka imepụta na ibipụta akara.

EasyCoder PD42 Ntuziaka onye nbipute

3 Ịhazi ngwa nbipute
Isiakwụkwọ a nwere ngalaba ndị a: · Ịghọta Steeti ndị nbipute · Usoro mmalite nke ngwa nbipute · Na-agbanwe ntọala nhazi · Na-agba ọsọ Testmode na Extended Testmode · Upgrading the Firmware

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Ịghọta Steeti ndị nbibi
Ihe nbipute PD42 nwere ike tinye ọtụtụ steeti dị iche iche, nke n'aka nke ya na-egosi ụdị ọrụ ọ dị ugbu a. A na-enye ozi gbasara ọnọdụ nke ngwa nbipute site na LEDs na ngosi.

Steeti nbipute PD42

Gbanyụọ ike steeti na-emelite TestMode Extended TestMode Ọnọdụ Ntọala
i-modu
Ngwa PUP na-adịghị arụ ọrụ na-eji mbipụta mbipụta (chere LTS) Dumpmode mperi akwụsịla

Nkọwa
A na-ebulite ngwa ngwa. Lee ibe 34. Lee ibe 36. A na-enweta ọnọdụ nhazi site na ngosi (nke a nwere ike ịchọ okwuntughe ma ọ bụrụ na ngwa nbipute na-eji ngwa nbipute mkpịsị aka). Na ọnọdụ ntọala, ịnwere ike ịgbanwe ntọala ngwa nbipute dị iche iche. A na-enweta i-mode site na ngosi mgbe ngwa nbipute adịghị arụ ọrụ. Na i-mode ngwa nbipute ga-agbagharị n'akụkụ dị iche iche nke nwere nkeji ise nke abụọ. Ike-UP (bido) Ngwa nbipute na-arụ ọrụ ma na-echere ọrụ mbipụta. Ngwa nbipute na-arụ ngwa (Mkpịsị aka).
Na-eche ihe nrịbama ewere akara iji gosi na ewerela akara ahụ. Akwụsịchara n'oge ọrụ ebipụta Njehie steeti Na Dumpmode, ngwa nbipute na-ege ntị na ọdụ ụgbọ mmiri niile wee bipụta mkpụrụedemede na-abata.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Bọtịnụ Bipụta nwere ọrụ dị iche iche dabere na ọnọdụ nke ngwa nbipute. Enwere ike ịme omume dị iche iche site na ịpị bọtịnụ na-erughị otu sekọnd n'otu n'otu. Oghere efu pụtara na ọ nweghị ihe emere.

Ọrụ bọtịnụ Bipụta

Ọnọdụ Ule na-akwalite ike steeti
Ụdị ule agbatịkwuru
Ụdị nhazi na-adịghị arụ ọrụ (FP)
Na-adịghị arụ ọrụ (IPL)
Ngwa na-agba nbibi kwụsịtụrụ (FP) kwụsịtụrụ (IPL) Error

Pịa bọtịnụ pịa "Ugboro abụọ-

<1 s

> 1 s

pịa"

Hụ “Ụdị ule na-agba ọsọ na ọnọdụ nnwale agbatịkwuru” na ibe 34
Hụ “Ụdị ule na-agba ọsọ na ọnọdụ nnwale agbatịkwuru” na ibe 34

Mpempe akwụkwọ/Nbipụta

Nri ule

Forfeed

Nri na-aga n'ihu Tinye kwụsịtụ ka ịpị bọtịnụ ọnọdụ

Akọwapụtara site na ngwa

Kwụsị ọrụ mbipụta

Gaa n'ihu ọrụ mbipụta Kagbuo ọrụ mbipụta

Gaa n'ihu ọrụ mbipụta Gaa n'ihu ọrụ mbipụta

Lee Isi nke 4, “Nchọpụta nsogbu na Ịkwado Mbipụta.”

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Omume nke akwụkwọ ndụ akwụkwọ ndụ Data/Njikere LED na Red Error LED na steeti dị iche iche ka egosiri na tebụl dị n'okpuru.
Njikere/Data na Mmejọ LED

Steeti

Ebe dị njikere/Data mperi LED

Gbanyụọ ike

Gbanyụọ

Na-ebuli elu

Igwe ọkụ na-agbanye otu mgbe ọzọ.

Testmode

Lee isi nke 5 maka nkọwa.

Ụdị ule agbatịkwuru Lee isi nke 5 maka nkọwa.

PUP

Gbanyụọ

Na-abaghị uru

Gbanwuo/Flash1

Gbanyụọ

Ngwa na-agba

Mbipụta

Gbanwuo/Flash1

Mbipụta (chere LTS) Ọkụ ọkụ ngwa ngwa2

Akwụsịla

Flash3

Njehie

Gbanyụọ

Gbanyụọ gbanyụọ / Flash4

Ihe odide ala ala peeji:
1 na-egbuke egbuke na okirikiri ọrụ 50%, 0.8 nke abụọ mgbe ị na-anata data, mekọrịta ya na LED njikere ịrụ ọrụ.
2 Ọkụ ọkụ abụọ ngwa ngwa, oge nke abụọ 1.6.
3 na-egbuke egbuke na okirikiri ọrụ 50%, oge nke abụọ, 0.8 nke abụọ, emekọrịtaghị ya na LED njikere ịrụ ọrụ.
A ga-amụnye 4 Error LED maka ọnọdụ ndị a: Site na mpempe akwụkwọ, si na rịbọn, ebuliri isi, mperi Cutter, yana nri anaghị eme. Ọ ga-enwu dị ka (2), mgbe isi nbipụta ọkụ dị oke ọkụ. Ga-enwu dị ka (3) maka ọnọdụ mperi ndị ọzọ onye njikwa njehie Direct Protocol jidere.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Ọnọdụ nke ngwa nbipute na-ekpebikwa ihe ọrụ/akara ngosi na-arụ ọrụ na mpio ngosi:

Mkpịsị aka 10.2.0

Ntọala ngwa na-agba ọsọ na-adịghị arụ ọrụ, igodo

Ntọlite, dezie uru

F1 F2 F3 F4 F5

i-mode obibi akwụkwọ

Nwalee ule
Nnwale

Akwụsịchara Ule Ule Agbatịkwuru Ule Ule Nkwalite Dumpmode
Igodo dị nro na-arụ ọrụ na steeti nbipute dị iche iche.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Ịghọta Usoro mmalite nke ngwa nbipute
Mgbe ị gbanyere ngwa nbipute, ọ ga-agafe usoro usoro nke ọ na-ekpebi ihe ntọala kwesịrị ịtọ na ngwa (ọ bụrụ na ọ bụla) kwesịrị ịmalite. Ndị ọrụ na-agba ọsọ firmware Fingerprint na PD42 ha na-enye ọtụtụ nhọrọ yana njikwa karịa omume mmalite nke ngwa nbipute.
Usoro mmalite nke ngwa nbipute (akara mkpịsị aka)
1 Lelee maka ọnụọgụ abụọ firmware file na kaadị CompactFlash. Ọ bụrụ na achọtara, kwalite.
2 Lelee maka ọnụọgụ abụọ firmware file na ngwaọrụ nchekwa oke USB. Ọ bụrụ na achọtara, kwalite.
Mara: Onye nbipute ahụ ga-etinye firmware echekwara na kaadị CompactFlash ọbụlagodi na ọ tọrọ karịa ụdị nke etinyere ugbu a na ngwa nbipute.
3 Lelee ma ebuliri isi mbipụta wee pịa bọtịnụ. Ọ bụrụ otu a, gaa na Extended Testmode, ma ọ bụghị ya gaa n'ihu jiri nzọụkwụ 3 malite.
4 Lelee maka ọnụnọ mmalite file (AUTOEXEC.BAT), nke mbụ na CompactFlash, emesia na "c/". Ọ bụrụ na achọtara ya, malite ịmalite file.
5 Lelee ka ịhụ ma ọ pịara bọtịnụ. Ọ bụrụ otu a, gaa na Testmode.
6 Gaa n'ihu na-ebuli elu. Lelee APPLICATION file na "c/:" maka mmemme file aha. Ọ bụrụ na achọtara ya, gbaa ọsọ. Ọ bụrụ na ọ tọgbọ chakoo, gaa na steeti na-abaghị uru.
Nke a pụtara na ị nwere ike ijikwa omume nke ngwa nbipute mgbe ịmalitere n'ụzọ dị iche iche: ị nwere ike ịmepụta autoexec.bat. file ma chekwaa ya na kaadị ebe nchekwa ma ọ bụ na ebe nchekwa na-adịgide adịgide nke ngwa nbipute (ngwaọrụ “c/”), ị nwere ike dee ngwa wee chekwaa njikọ ya na APPLICATION. file, ma ọ bụ ị nwere ike họrọ ịbanye Testmode.
A na-atụ aro ka ịmalite ngwa ọdịnala site na ide aha mmemme achọrọ (“ProgramAme.PRG”) na APPLICATION file na "c/"

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Ịmalite ngwa omenala nwekwara ike ime site na ịmepụta mmalite file (autoexec.bat) nke ga-eme na mmalite. Nke a file ga-enwerịrị iwu akara mkpịsị aka nke atụgharịrị ozugbo. Iwu nkịtị bụ LOAD na RUN. Hụ akwụkwọ ntuziaka Intermec Fingerprint Programmer's Reference (P/N 937005-xxx) ka ịmụta ka esi emepụta na chekwaa ụdị ihe a. file na ngwa nbipute.
Usoro mmalite nke ngwa nbipute (IPL)
1 Lelee maka ọnụọgụ abụọ firmware na kaadị CompactFlash. Ọ bụrụ na achọtara, kwalite.
2 Lelee maka ọnụọgụ abụọ firmware na ngwaọrụ nchekwa oke USB. Ọ bụrụ na achọtara, kwalite.
Mara: Onye nbipute ahụ ga-etinye ngwa ngwa echekwara na kaadị CompactFlash ma ọ bụ ngwaọrụ nchekwa USB ọbụlagodi na ọ tolitere ụdị nke etinyere ugbu a na ngwa nbipute.
3 Lelee ma ebuliri isi mbipụta wee pịa bọtịnụ. Ọ bụrụ otu a, gaa na Extended Testmode, ma ọ bụghị ya gaa n'ihu jiri nzọụkwụ 3 malite.
4 Lelee ka ịhụ ma ọ pịara bọtịnụ. Ọ bụrụ otu a, gaa na Testmode.
5 Gaa n'ihu na-ebuli elu. Gbaa ihe nlele.
Usoro nke ịbanye na iji Testmode na Extended Testmode ka akọwara ma emechaa n'isiakwụkwọ a.
Na-agbanwe ntọala nhazi
Enwere ụzọ dị iche iche ị nwere ike isi gbanwee ntọala nhazi nke ngwa nbipute. Ị nwere ike ime ya ozugbo site na ngosi, ma ọ bụ site na PC onye ọbịa site na iji eriri USB, serial ma ọ bụ ethernet njikọ.
Rụtụ aka na Mgbakwunye C na D maka nkọwa view nke osisi Setup na mkpịsị aka na IPL, yana maka ozi ndị ọzọ gbasara usoro nhazi dị iche iche.
Ịgbanwe Ntọala Nhazi Site na Ngosipụta
Iji gbanwee ntọala nhazi, ịkwesịrị ịbanye ọnọdụ nhazi. Nweta ọnọdụ ntọala site na ngosipụta site na ịpị Ntọala ( ).

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Mgbe ị nọ na ọnọdụ ntọala, jiri igodo dị nro ka ị gagharịa na nhọrọ dị iche iche dị na osisi ntọala.

Na-agagharị na ọnọdụ nhazi

Igodo dị nro

Ọrụ Bugharịa otu ihe menu gaa n'aka ekpe n'otu ọkwa. Bugharịa otu ihe menu gaa n'aka nri n'otu ọkwa.

Bulie n'otu ọkwa. Nabata/Bugharịa n'otu ọkwa. Dezie uru
Welite uru Wetuo ụkpụrụ Wepu uru.

A na-ahazi isi ọnụ nke osisi ntọala n'ime loop, dị ka egosiri n'okpuru (nkọwa n'eluviewA na-enye s na Ihe Odide C (Mkpịsị aka mkpisi aka) na Ihe Odide D (IPL)). Ọnụ ọnụ nke ọ bụla na-ekewa ruo n'ọtụtụ sub-ọnụ ọnụ. Na mmalite, firmware na-ekpebi ma ọ bụrụ na etinyere akụrụngwa nhọrọ dị ka cutter ma ọ bụ bọọdụ interface na ngwa nbipute, a na-agbakwunye ndị a na osisi Setup.

Ebe mmalite
Nhazi: SER-COM, UART1
Nhazi: Mbipụta DEFS

Nhazi: NET-COM, NET1
Nhazi: COM

Nhazi: MEDIA

Nhazi: NETWORK
Nhọrọ

Nhazi: FEEDADJ

Nhazi: EMULATION

Isi ọnụ nke osisi Setup (Mkpịsị aka).

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute

Ebe mmalite
Nhazi: SER-COM

Nhazi: COM

Nhazi: Nhazi

Nhazi: NETWORK
Nhọrọ

Nhazi: MEDIA

Nhazi: Nnwale/ỌRỤ

Isi ọnụ nke osisi Setup (IPL).

Na-agbanwe ntọala nhazi na PrintSet 4
PrintSet 4 bụ ngwa nhazi ngwa nbipute nke dị na CD PrinterCompanion, yana maka nbudata na Intermec. websaịtị. PrintSet 4 nwere ike ịkpakọrịta na ngwa nbipute gị site na eriri serial ma ọ bụ njikọ netwọkụ, ma na-arụ ọrụ na PC niile na-agba Windows 98 (ma ọ bụ mgbe e mesịrị). Usoro ihe omume na-enye gị ohere ịgbanwe ngwa ngwa niile nke ntọala ntọala. Ọ gụnyekwara ọkachamara ntọlite ndị na-eduzi gị na ọrụ nhazi niile.
Ịgbanwe Ntọala Nhazi Site na Ibe Ụlọ nbipute
Ọ bụrụ na ị nwere kaadị netwọk EasyLAN nhọrọ na ngwa nbipute jikọọ na netwọk gị, ị nwere ike iji nke gị web ihe nchọgharị iji chọgharịa na ibe ụlọ nbipute wee mee mgbanwe ntọlite ọ bụla achọrọ n'ebe ahụ. Soro ntuziaka enyere na "Jikọọ ngwa nbipute na netwọk" na ibe 11.
N'otu oge na ibe mbụ, pịa nhazi n'akụkụ aka ekpe nke ihuenyo iji nweta ntọala ntọala nke ngwa nbipute.
Ịgbanwe Ntọala Nhazi Iji Ahịrị Iwu
Ị nwere ike ịgbanwe paramita ntọlite site na izipu iwu ozugbo na ngwa nbipute site na iji mmemme ọnụ gị (ma site na njikọ serial ma ọ bụ netwọkụ). Iwu akara mkpịsị aka a ga-eji bụ SETUP, na-esote ọnụ, ọnụ ala na ntọala paramita. Maka example, ka ịtọ ntọala mgbasa ozi gị ka ọ bụrụ akara nwere oghere, zipu ntuziaka a:
Nhazi “MEDIA, Media TYPE, LABEL (w GAPS)”

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Ntuziaka kwekọrọ na IPL bụ:
T1
Mara: Ndị ọrụ IPL kwesịrị ibu ụzọ chọpụta na ha nwere ntọala HyperTerminal ziri ezi. Hụ ihe onyonyo n'okpuru.

Ntọala hyperterminal (naanị IPL)
Maka ozi ndị ọzọ gbasara otu esi agbanwe paramita ntọlite , hụ Akwụkwọ ntuziaka Mkpịsị aka Programmer's Reference (P/N 937-005xxx), ma ọ bụ akwụkwọ ntuziaka IPL Programmer's Reference (P/N 066396xxx).
Na-agba ọsọ Testmode yana agbatịkwu testmode
Jiri ọnọdụ Testmode na Extended testmode mgbe ịchọrọ inyocha ntọala ngwa nbipute, bipụta akara ule, weghachi ntọala ụlọ nrụpụta, ma ọ bụ tinye Dumpmode maka ebumnuche nchọpụta nsogbu. Ụdị ule abụọ dị, Testmode na Extended Testmode. Testmode bụ usoro ahịrị dị mfe nke chọrọ ntinye ntakịrị, ebe Extended Testmode na-enye onye ọrụ nhọrọ karịa.
Na-agba ọsọ Testmode
Testmode na-eme usoro ndị a:
1 Họrọ ụdị mgbasa ozi (oghere/akara/na-aga n'ihu).

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
2 Mee mmezi ihe mmetụta (Feedfeed).
3 Bipụta akara ule.
4 Banye Dumpmode.
Ka ịgba ọsọ testmode
1 Hụ na agbanyụrụ ngwa nbipute ahụ, juputara na mgbasa ozi yana na ewetula isi mbipụta ahụ.
2 Pịa ma jide bọtịnụ Bipụta na-acha anụnụ anụnụ.
3 Debe bọtịnụ Bipụta ala, wee gbanye ọkụ ọkụ. Mgbe ihe dị ka sekọnd iri, ngwa nbipute na-abanye na Testmode na atọ nke ihu LEDs na-amalite na-egbuke egbuke n'otu oge. Window ngosi na-enwu, na ngwa nbipute na-arụ usoro nhazi usoro mgbasa ozi.
Ọ bụrụhaala na ị na-etinye bọtịnụ Bipụta, onye nbipute na-agbagharị site na ụdị mgbasa ozi a na-ahọrọ (Gap/Mark/Continuous).

Họrọ oghere mgbasa ozi

Họrọ akara mgbasa ozi

Họrọ mgbasa ozi na-aga n'ihu

4 Họrọ ụdị mgbasa ozi gị site na ịhapụ bọtịnụ Bipụta n'oge kwesịrị ekwesị.
Ngwa nbipute na-arụ ọrụ calibration sensọ na-akpaghị aka (Testfeed) dabere na nhọrọ gị, wee họrọ mbipụta mbufe thermal ma ọ bụrụ na etinyere rịbọn, ma ọ bụghị ya, a na-ahọrọ thermal ozugbo dị ka nke ndabara.
Ihe nbipute na-ebipụta ọtụtụ akara ule nwere parampat nhazi ngwa nbipute. Ka ịwụpụ akara ule, pịa bọtịnụ Bipụta.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Ihe nbipute dị ugbu a na Dumpmode wee nyochaa ọdụ ụgbọ mmiri nkwukọrịta. A ga-ebipụta mkpụrụedemede ọ bụla enwetara n'ọdụ ụgbọ mmiri nzikọrịta ozi na labelụ mgbe ọpụpụ Dumpmode.
5 Pịa bọtịnụ Bipụta otu ugboro ka ịpụ na Dumpmode.
Ị nwekwara nhọrọ iji chekwaa ihe mkpofu site na ịpị Chekwa ()
Maka ozi ọzọ gbasara Dumpmode, hụ "Nchọpụta nsogbu nzikọrịta ozi" na ibe 45
Ihe nbipute ga-amalite dị ka ọ dị na ọnọdụ ewegharịrị. Ozugbo arụ ọrụ, LED / Njikere na Njikere na-arụ ọrụ na-enwu ọkụ.
Ụdị Testmode agbatịkwuru
Enwere ike iji Testmode agbatịkwuru iji mee nnwale ndị ọzọ. Nke a na-agụnye nhọrọ ibipụta akara ule, na-agba ọsọ testfeed n'ụdị nwayọ, ịbanye Dumpmode, na ịtọgharịa na ndabara ụlọ ọrụ.
Iji mee Extended Testmode
1 Hụkwa na agbanyụrụ ngwa nbipute, juputara na mgbasa ozi, na ebuliri isi mbipụta ahụ.
2 Pịa ma jide bọtịnụ Bipụta na-acha anụnụ anụnụ.
3 Debe bọtịnụ Bipụta ala, wee gbanye ọkụ ọkụ. Mgbe ihe dị ka sekọnd iri gachara, ngwa nbipute na-abanye na ọnọdụ Testmode Extended.
Igwe ọkụ atọ niile na-enwu ọsọ ọsọ ugboro anọ iji gosi na agbanyere ọnọdụ testmode agbanyere.
4 Hapụ bọtịnụ Bipụta.
5 Wetuo isi nbipụta.
6 Ị nọ ugbu a na ọnọdụ ule agbatịkwuru. Pịa aka nri ( ) ka ị gagharịa na nhọrọ dị iche iche.
Ka ịhọrọ ọrụ nnwale, pịa Acknowledge ( ).
Iji pụọ n'ụdị ule agbatịkwuru, pịa Kagbuo ( ).

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Họrọ mgbasa ozi

Nnwale

Arụmọrụ na ọnọdụ Test Extended

Ọrụ Họrọ Mgbasa ozi
Nleba akara ngosi Mbido Ama Dumpmode Factory Default Nwelite na Wepụ

Nkọwa
Nke a bụ otu ọrụ ntọlite media dị ka ọ dị na ọnọdụ nnwale, yana ọdịiche dị mkpa na ngwa nbipute na-eme nhazi ngwa ngwa ihe mmetụta (nwayọọ testfeed). Ime ihe nleba anya nwayọ nwere ike ịbụ ụzọ isi dozie nsogbu nchọpụta oghere/ akara.
Bipụta akara nhazi, otu n'otu oge. Pịa Acknowledge ( ) ka ibipụta akara na-esote. Ngosipụta na-egosi akara ule na-esote.
Banye Dumpmode. Maka ozi ndị ọzọ gbasara ịgba ọsọ Dumpmode, hụ "Nchọpụta nsogbu nzikọrịta ozi" na ibe 45.
Weghachite ntọala ụlọ nrụpụta. Họrọ nhọrọ, ma soro ntuziaka dị na ngosi.
Wepụ ọnọdụ ule agbatịkwuru, tinye ọnọdụ nhazi.
Wepụ ụdị ule agbatịgoro.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 3 - Ịhazi ngwa nbipute
Na-akwalite ngwa ngwa
Firmware na ngwanrọ kachasị ọhụrụ na-adị mgbe niile maka nbudata na Intermec web saịtị na www.intermec.com.
Ka ibudata mmelite firmware
1 Gaa na Intermec web saịtị na www.intermec.com.
2 Pịa Ọrụ & Nkwado > Nbudata.
3 Na Họrọ mpaghara ngwaahịa, họrọ EasyCoder PD42 na a ga-egosi gị na ngwanrọ kachasị ọhụrụ dị.
4 Budata ụdị firmware ọhụrụ na kọmputa gị.
5 Wepụ zip ahụ file gaa na folda na kọmputa gị. Dị ka ọ na-adịkarị, a na-etinye ụdị atọ nke firmware na ndịiche ndị a na mgbakọ aha:
· Enweghị suffix: Nkwalite ngwa ngwa nkịtị.
· FD suffix: Firmware nwelite nrụpụta ụlọ ọrụ an-kpọ. Ọdabara naanị mgbe ị na-emelite site na kaadị CompactFlash.
· NU suffix: Boots nwere firmware ọhụrụ, ma ngwa nbipute na-alaghachi na ụdị firmware gara aga na reboot (Enweghị nkwalite). Ọdabara naanị mgbe ị na-ebulite site na kaadị Flash kọmpat.
Iji bulite ngwa nbipute ọhụrụ gị
Jiri PrintSet 4 soro usoro nkwalite firmware.
Ọ bụrụ na ị nwere njikọ netwọkụ, chọgharịa na ibe obibi nke ngwa nbipute (lee “Jikọọ ngwa nbipute na netwọk” na ibe 11), wee họrọ Mmezi. Bulite ngwa ngwa file.
· Detuo ọnụọgụ abụọ nke firmware file na kaadị CompactFlash. Gbanyụọ ngwa nbipute, tinye kaadị n'ime oghere CompactFlash nke ngwa nbipute wee gbanye ngwa nbipute. A ga-akwalite ngwa nbipute na-akpaghị aka.
· Detuo ọnụọgụ abụọ nke firmware file na ngwaọrụ nchekwa oke USB. Tinye ọnụọgụ abụọ nke firmware file na ndekọ aha /d/upgrade, na ngwa nbipute ga-eji nke ahụ file iji kwalite ọ gwụla ma ngwa nbipute na-arụ ọrụ ngwa ngwa ahụ. Ihe nbipute ga-achọ a file aha ya bụ FIMWARE.BIN mbụ. Ọ bụrụ na ọ dịghị otú ahụ file, ọ ga-achọ firmware ọ bụla file.

EasyCoder PD42 Ntuziaka onye nbipute

4 Ịchọpụta nsogbu na idobe ngwa nbipute
Isiakwụkwọ a na-ekpuchi isiokwu ndị a: · Nsogbu arụ ọrụ nke ngwa nbipute · Nsogbu bipụta dị mma · Nsogbu nkwurịta okwu · Ịkpọtụrụ nkwado ngwaahịa · Imezi ngwa nbipute · Ịkwado ngwa nbipute.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Nsogbu arụ ọrụ ngwa nbipute
Tebụl ndị a na-edepụta nsogbu ndị na-emetụta ikike nke ngwa nbipute ịrụ ọrụ.
Mara: Ndị ọrụ akara mkpịsị aka nwere ike nweta nchoputa njehie na iwu SYSHEALTH$. Tinye ahịrị PRINT SYSHEALTH$ site na njikọ ọnụ iji nweta ọkwa Njikere ịrụ ọrụ nke ngwa nbipute.

Gosipụta ozi mperi (ọkụ ọkụ na-acha anụnụ anụnụ dị njikere ịrụ ọrụ)

Ebuliri mperi akara akara mperi.

Ngwọta isi ebipụta ala.

Nlekọta. Njehie njikọ IP.

Ngwa nbipute na-emelite ngwa ngwa ya. Chere ka ọ rụchaa ọrụ ahụ.
Lelee ma ewepụla eriri netwọk ahụ

Pịa ndepụta emeghị. Pịa nri( ) ma ọ bụ Testfeed( )

Nwalee

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Gosipụta ozi mperi (ọkụ ọkụ na-acha anụnụ anụnụ dị njikere ịrụ ọrụ)

Ewereghị akara mperi akara akara mperi. LSS dị oke elu, LSS dị ala.
Mperi nhazi IP.

Ngwọta
Akwụsịla mbipụta n'ihi na akara na-egbochi ihe mmetụta LTS. Wepu akara ka ịmaliteghachi mbipụta.
Njehie ndị a nwere ike ime mgbe ị na-agba ọsọ nrịbanye n'etinyeghị mgbasa ozi ọ bụla, ma ọ bụ ọ bụrụ na ị nwere ntọala mgbasa ozi na-ezighi ezi.
Jikwa mgbasa ozi buru ihe nbipute (lee “Ibudata Mgbasa ozi” na ibe 14). Malitegharịa ekwentị nbipute n'ụdị ule (lee "Ule na-agba ọsọ" na ibe 34) wee họrọ ụdị mgbasa ozi kwesịrị ekwesị.
Onye nbipute na-agbalị ịnweta adreesị IP site na netwọk.
Chere ka ọ rụchaa ọrụ ahụ.

Gosipụta ozi mperi (Error LED blinks)

Ebe ozi mperi akara akara esighị na akara.
Apụọ na mgbasa ozi.

Ngwọta
Ị na-agbalị ibipụta na mpaghara gafere "window mbipụta." Hụ ozi mgbakwunye C (Mkpịsị aka mkpisi aka) na D (IPL) maka otu esi edobe paramita mgbasa ozi.
Ibu ibu mgbasa ozi na ngwa nbipute. Hụ “Ibudata Mgbasa Ozi” na ibe 14.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Gosipụta ozi mperi (Error LED blinks) (na-aga n'ihu)

Mpi mpe mpe mpe akwa akara mperi. Ahụghị akara.
Printhead na-ekpo ọkụ. Emeghị ihe nlele.

Ngwọta
Ibu mbufe rịbọn. Lee “Loading thermal Transfer Ribbon” na ibe 19. Njehie a nwekwara ike ime ma ọ bụrụ na ị ka gbanwere ka eduzi mgbasa ozi thermal, na ngwa nbipute na-atụ anya ka a ga-ebunye rịbọn. Ọ bụrụ na nke a bụ ikpe, gbanwee Ụdị Akwụkwọ na Ntọala.
Ihe nbipute ahụ ahụghị oghere akara ma ọ bụ akara ojii.
Banye n'ụdị nhazi wee chọpụta na oke ogologo akara aha ziri ezi (lee "Media Setup" na ibe 91 maka akara mkpịsị aka na ibe 109 maka IPL).
Chọpụta na ụdị mgbasa ozi ziri ezi. Njehie a nwere ike ime ma ọ bụrụ na ị na-eji mgbasa ozi na-aga n'ihu, dịka ọmụmaatụ, mana edobere ntọala mgbasa ozi gị ka ọ bụrụ akara nwere oghere.
Isi akwụkwọ a na-ekpo oke ọkụ ma chọọ ka ọ dajụọ. Chere ka ịmaliteghachi mbipụta na-akpaghị aka.
Pịa Testfeed ( ).

Nwalee

Ahụghị cutter.
Cutter anaghị aza.

Ezipula iwu ịkpụ ma onye nbipute enweghị ike ịhụ cutter ahụ. Lelee na etinyere cutter nke ọma.
Lelee na etinyere cutter nke ọma.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Nsogbu arụ ọrụ mbipụta ndị ọzọ

Nsogbu

Ngwọta / Ihe kpatara ya

Igwe ọkụ na-achịkwa ọkụ bụ Lelee na eriri ọkụ ziri ezi

adịghị ọkụ mgbe ike dị

jikọọ na ngwa nbipute na eletriki

gbanye.

ntinye.

Agbanyere mperi ikanam · Lelee ma ngwa nbipute esighị na mgbasa ozi ma ọ bụ

mgbe e bipụtachara.

eriri.

Lelee ma ọ bụrụ na mgbasa ozi agbachiela ma ọ bụ gbagọrọ agbagọ.

Lelee na akpọchiela ma mechie usoro mbipụta akwụkwọ nke ọma.

· Lelee cutter.

Lelee ngwa.

A na-akụchi akara ma ebichaa ya.

Kpochapụ jam mgbasa ozi (lee "Clearing Media Jams" na ibe 49). Ọ bụrụ na akara a rapaara n'isi nbipụta ọkụ, hichaa isi akwụkwọ (lee "Cleaning the Printhead" na ibe 57).

Nwalee

Mgbe ị na-ebi akwụkwọ, akara bụ · Gbaa akwụkwọ nlele ọhụrụ (pịa ()).

wụfuru.

Lelee ma ọ bụrụ na ọ na-ewute ihe mmetụta oghere akara

site na uzuzu ma ọ bụ ihe ndị si mba ọzọ (lee

"Ịgbanwee ihe mmetụta oghere akara akara" na

ibe 53).

Mgbe ị na-eji cutter, akara bụ · Lelee ma ọ bụ ọkpụrụkpụ mgbasa ozi

ebipụghị ogologo.

gafere 0.25mm (9.8 mil).

● Lelee na ebukọrọ mgbasa ozi nke ọma. Lelee na mgbasa ozi na-agba ọsọ dị nso na mpaghara etiti nke ngwa nbipute dị ka o kwere mee, na ụzọ akwụkwọ ahụ kwụ ọtọ.

Mgbe ị na-eji cutter, akara enweghị ike inye nri ma ọ bụ igbubi adịghị mma.
Mgbe ị na-eji rewinder dị n'ime, ọrụ na-adịghị mma na-apụta. Ihe nbipute na-anọgide na-ebipụta ma ọ bụ na-enye nri mgbe ọ kwesịrị ịkwụsị.
Mbipụta na-adị nwayọọ.

Lelee na arụnyere cutter nke ọma.
Lelee ma mkpanaka ndepụta akwụkwọ na-arapara n'ahụ. Dị ọcha ma ọ dị mkpa (lee “Ikpochapụ ogige mgbasa ozi” na ibe 58).
Lelee na etinyere mgbasa ozi nke ọma.
Lelee ntọala mgbasa ozi. Lelee oghere ihe mmetụta akara aha. · Dị ọcha ma ọ bụrụ na sensọ chọrọ ihicha. Lelee ngwa.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Nsogbu Bipụta Ogo

Nsogbu Bipụta Ogo

Nsogbu

Ngwọta / Ihe kpatara ya

Mbipụta agwụla ma ọ bụ adịghị ike. Ndị ọrụ akara mkpịsị aka: Gbanwee ntọala mgbasa ozi: mgbe niile, ihe na-akpata na iche.
Ndị ọrụ IPL: Gbanwee ntọala mmetụta.
Lelee ma isi akwụkwọ ọ dị mkpa ihicha, hụ “Cleaning the Printhead” na ibe 57.
Lelee nrụgide isi n'isi, hụ “Adjusting Printhead Pressure” na ibe 51.
Tulee ọnọdụ ntụpọ isi akwụkwọ, hụ “Adjusting Printhead Dot Line” na ibe 51.

Ngwa nbipute na-arụ ọrụ mana ọ nweghị ihe ebipụtara.
Naanị obere akara ka a na-ebipụta. A naghị ebipụta akụkụ nke onyonyo a n'akụkụ ụzọ nri.

· Mbipụta na Direct Thermal media: lelee na mgbasa ozi juputara na akụkụ nwere mmetụta ọkụ chere ihu n'isi mbipụta.
· Iji rịbọn Nyefee Thermal bipụta: Lelee na akụkụ ink nke rịbọn ahụ chere mgbasa ozi ihu. Lee “Na-ebunye Ribbon Nfefe Thermal” na ibe 19.
Họrọ ụdị mgbasa ozi ziri ezi (akara ngosi nwere oghere, akara ojii ma ọ bụ na-aga n'ihu), na ụdị akwụkwọ ziri ezi (nfefe ọkụ ozugbo ma ọ bụ thermal).
· Lelee na ejikọrọ nke ọma n'isi akwụkwọ na usoro mbipụta.
Lelee nguzozi nke isi akwụkwọ, hụ “Adjusting Printhead Balance” na ibe 50.
Lelee ma isi akwụkwọ ọ dị mkpa ihicha, hụ “Cleaning the Printhead” na ibe 57
Lelee na rịbọn ahụ adịghị ahịhịa n'ahụ, hụ "Mgbochi Ribbon Wrinkling" na ibe 47.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Nsogbu Bipụta Ogo (na-aga n'ihu)

Nsogbu

Ngwọta / Ihe kpatara ya

Printout ọchịchịrị bụ

Lelee nguzozi nke isi akwụkwọ, hụ

enweghị isi n'ofe ụzọ mgbasa ozi. "Ịgbanwee nguzozi isi mbipụta" na

ibe 50.

Lelee nrụgide printhead, hụ

"Ịgbanwe nrịbama isi mbipụta" na

ibe 51.

Mbipụta adịghị n'ọnọdụ achọrọ.

Lelee maka mperi na ngwa ngwanrọ.
Lelee ma ọ bụrụ na mgbasa ozi, uzuzu ma ọ bụ rịbọn na-akpaghasị ihe mmetụta oghere akara.
Lelee ọnọdụ mpụta nke ihe mmetụta oghere akara.
· Lelee ntuziaka nsọtụ na ntuziaka mgbasa ozi.
Lelee usoro mgbasa ozi (enweghị nghọta zuru oke, ahịrị preprint na-egbochi ọrụ akara ojii, na ihe ndị ọzọ).
Lelee ma ọ bụrụ na ihe mkpuchi platen chọrọ ihicha ma ọ bụ dochie ya.

Ịchọpụta nsogbu nkwurịta okwu
Jiri Dumpmode chọpụta na ngwa nbipute na-enweta data n'aka onye ọbịa nke ọma.
Iji Line Analyzer (Mkpịsị aka mkpịsị aka)
Na Dumpmode, ngwa nbipute na-eme mmemme akara mkpịsị aka akpọrọ Line Analyzer. Dị ka aha ahụ pụtara, Line Analyzer na-ewepụta mkpụrụedemede na-abata na ọdụ ụgbọ mmiri ma bipụta ha n'otu akara ma ọ bụ karịa. Line Analyzer na-eji “autohunt” nke pụtara na mmemme a na-enyocha ọdụ ụgbọ mmiri niile maka data.
Ụzọ kachasị mfe iji banye Dumpmode bụ site na Testmode ma ọ bụ Extended Testmode (lee "Ọnyà Testmode na Extended Testmode" na ibe 34)
Mgbe abanyela Dumpmode, ngwa nbipute ga-agwa gị nke a site na ibipụta "DumpMode banyere" na labelụ. Ngosipụta na-egosi akara ngosi Dumpmode, na ngwa nbipute adịla njikere ịnata data.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Mgbe ngwa nbipute na-enweta data, Njikere/Data ikanam na-egbuke egbuke. Enwere oge nkwụsị nke ọkara nke abụọ nke pụtara na ọ bụrụ na enwetaghị mkpụrụedemede ọzọ ka 0.5 sekọnd gasịrị, mmemme ahụ na-atụle nnyefe ahụ kwụsịrị wee bipụta akara.
A na-ebipụta mkpụrụedemede enwere ike ibipụta na ojii na-acha ọcha, ebe a na-ebipụta mkpụrụedemede njikwa na mkpụrụedemede oghere (ASCII 000 dec) na ọcha-na-oji.
Ọ bụrụhaala na a na-anata eriri mkpụrụedemede na-aga n'ihu, mmemme ahụ na-ekechi ahịrị ahụ ruo mgbe akara ahụ jupụtara wee malite ibipụta akara ọzọ. Mgbe nnyefe mkpụrụedemede ọ bụla, a na-ebipụta ozi ndị a:
Nọmba ibe
Ọnụọgụ mkpụrụedemede ebipụtara na labelụ
Ngụkọta ọnụọgụ mkpụrụedemede enwetara ugbu a
Tupu ị pụọ Dumpmode, ị nwere ike họrọ ịchekwa ihe mkpofu na ebe nchekwa nke ngwa nbipute. Ihe nbipute na-ebipụta akara na ebe echekwara file (nha kacha nke echekwara file bụ 128 kB).
Mgbe ịpụsịrị Dumpmode, a na-ebipụta akara ikpeazụ nwere ederede "Wepụ na ọnọdụ mkpofu".
Iji Dumpmode (IPL)
Mgbe Dumpmode na-arụ ọrụ, ngwa nbipute na-edobe mkpụrụedemede na-abata na ọdụ ụgbọ mmiri ma bipụta ha n'otu akara ma ọ bụ karịa.
Ndị ọrụ na-agba ọsọ IPL firmware na ngwa nbipute ha nwere ike ịnweta Dumpmode n'ụzọ abụọ dị iche iche, nke na-arụpụta nsonaazụ dịtụ iche:
Nweta Dumpmode site na ọnọdụ Testmode ma ọ bụ Extended Testmode, ị ga-enwetakwa mbipụta na-adị ka nke emepụtara na Line Analyzer program na igwe ejiri mkpịsị aka arụ ọrụ. Hụ “Iji ihe nyocha ahịrị (mkpịsị aka mkpisiaka)” na ibe 45 maka ozi ka esi akọwapụta akara.
Nweta Dumpmode site na Mbido, a ga-ebipụta mkpụrụedemede na ahịrị na-aga n'ihu, yana ọnụọgụ hexadecimal kwekọrọ.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Ka ịbanye Dumpmode site na Ntọala
1 Tinye ntọala site na ịpị ( ).
2 Gaa na Nnwale/Ọrụ > Ntụfu data.
3 Họrọ Ee.
4 Ka ọpụpụ Dumpmode, malitegharịa ngwa nbipute.
Nkwado ngwaahịa kọntaktị
Ọ bụrụ na ịnweghị ike ịchọta azịza nke nsogbu gị na ngalaba "Nchọpụta nsogbu na ịnọgide na-ebi akwụkwọ", ị nwere ike ịga na Intermec technical knowledge base (Knowledge Central) na intermec.custhelp.com iji regharịa.view ozi teknụzụ ma ọ bụ ịrịọ nkwado teknụzụ. Ọ bụrụ na ị ka chọrọ enyemaka mgbe ịgachara Knowledge Central, ị nwere ike ịkpọ Nkwado ngwaahịa. Iji gwa onye nnọchi anya nkwado ngwaahịa Intermec na USA ma ọ bụ Canada, kpọọ:
1-800-755-5505
Na mpụga USA na Canada, kpọtụrụ onye nnọchi anya Intermec nke mpaghara gị.
Tupu ịkpọọ Intermec Product Nkwado, hụ na ị nwere ozi gbasara ụdị nbipute gị dị njikere.
Igwe na akara akara nọmba serial ka etinyere na efere azụ nke ngwa nbipute, ma nwee ozi gbasara ụdị, ụdị na nọmba serial yana AC vol.tage na ugboro ole.
Na-edozi ngwa nbipute
Akụkụ a na-akọwa ụfọdụ mgbanwe ị nwere ike ime iji dozie nsogbu ndị metụtara ịdịmma mbipụta.
Na-egbochi rịbọn wrinkling
Ọ bụrụ na ị nwere nsogbu na rịbọn mbufe na-akpụ akpụ, ị nwere ike ịnwa ịhazigharị rịbọn ma ọ bụ ọta rịbọn.
Iji dozie esemokwu rịbọn
1 Pịa mkpịsị ugodi na oghere ọkọnọ rịbọn.
2 Tụgharịa ya n'akụkụ elekere ka iwelie ike mgbaji ma ọ bụ n'aka elekere ka ibelata ike imebi.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Ọ bụrụ na akara gị dị ka egosiri n'okpuru, ị nwere ike ịnwa ịhazigharị ọta rịbọn.

Nwale Label A

Nnwale akara B

1234567890 1234567890

Mbipụta adịghị mma sitere na rịbọn wrinkling kpatara.
Usoro ọta rịbọn dị n'elu ebe a na-ebipụta thermal. Ọ nwere skru abụọ nwere ike ịgbanwe, A na B, dị ka egosiri n'okpuru.

B
rịbọn ọta mgbanwe kposara
Ka ịhazie ọta rịbọn 1 Ọ bụrụ na nbipụta labelụ dabara akara ule A, tụgharịa screw A
n'aka elekere. Ọ bụrụ na mbipụta ahụ dabara akara ule B, tụgharịa skru B n'akụkụ elekere.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
2 Tụgharịa ihe nkedo ahụ na ọkara oge ma mee mbipụta nnwale ọhụrụ. 3 Gaa n'ihu ruo mgbe ị ga-enweta ọmarịcha mbipụta.
Ndozi ihe nkedo agaghị agafe ntụgharị abụọ zuru oke ma ọ bụ akwụkwọ nwere ike ọ gaghị eri nri nke ọma. N'ọnọdụ dị otú ahụ, tụgharịa skru na elekere elekere kpamkpam wee malite ọzọ.
Na-ehichapụ Jams Mgbasa Ozi
Iji kpochapụ jam mgbasa ozi na usoro mbipụta 1 Gbanyụọ ike na ngwa nbipute. 2 Sepụ lever isi mbipụta wee tụgharịa ya na nchegharị elekere
bulie printhead. 3 Wepụ mgbasa ozi na usoro mbipụta.
Ọ bụrụ na e merụrụ mgbasa ozi ahụ ma ọ bụ rapaara na roller platen, jiri nlezianya wepụ ya na aka na-ejighi ngwa ọ bụla dị nkọ nke nwere ike imebi ihe mkpuchi platen ma ọ bụ isi akwụkwọ. Zere ịgbagharị ihe nrịbama platen.
Kpachara anya ka ịzenarị ime ka rola platen tụgharịa. Akụkụ eletrọnịkị nwere ike mebie kpamkpam.

4 Bibie akụkụ mgbasa ozi ọ bụla mebiri emebi ma ọ bụ gbajiri agbaji.
5 Lelee ma ọ bụrụ na nrapado na-arapara n'akụkụ akụkụ nke usoro mbipụta. Ọ bụrụ otú ahụ, dị ọcha dị ka akọwara na “Ịnọgide na-ebi akwụkwọ” na peeji nke 56.
6 Bugharịa usoro mgbasa ozi dịka akọwara na "Loading Media" na ibe 14.
7 Gbanwee ike.
8 Pịa bọtịnụ Bipụta ka ịhazigharịa ndepụta mgbasa ozi.
Na-edozi isi mbipụta
Idokwa isi akwụkwọ a n'ụzọ ziri ezi dị oke mkpa maka inweta mbipụta dị elu.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Na-emezi nha n'isi Printhead
A haziri ngwa nbipute ụlọ ọrụ maka obosara mgbasa ozi zuru oke. Ọ bụrụ na ị na-eji mgbasa ozi na-erughị obosara mgbasa ozi zuru oke, Intermec na-atụ aro ka ị gbanwee ọnọdụ igbe nguzozi nke printhead ka e wee kpagide isi n'akwụkwọ ahụ nke ọma megide mgbasa ozi. Ọ bụrụ na mbipụta gị adịghị ike n'otu akụkụ karịa n'akụkụ nke ọzọ, nke a nwere ike ịbụ n'ihi isi mbipụta na-enweghị isi. Ka ịgbanwee itule isi mbipụta 1 Mepee ọnụ ụzọ akụkụ. 2 Ọ bụrụ na etinyere rịbọn mbufe, wepụ ya. 3 Welie isi nbipụta site n'ịwepụ ihe ndọpụta n'isi na
na-atụgharị ya otu ụzọ n'ụzọ anọ nke ntụgharị aka elekere. 4 Bugharịa igbe nguzozi n'akụkụ aka nri (mpụta) gaa n'aka nri
(n'èzí) maka mgbasa ozi sara mbara, yana ime (n'aka ekpe) maka mgbasa ozi dị warara.
Igbe nguzozi
5 Tinye isi nbipụta wee buru rịbọn ahụ. 6 Nwalee ma dozie ma ọ dị mkpa. (Ndụmọdụ: Jiri mgbasa ozi thermal ozugbo
iji zere nbudata na ibutu rịbọn ọtụtụ ugboro.)

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Na-emezi nrụgide Printhead
A na-edozi nrụgide nke isi ihe nbipụta ọkụ na-emegide ihe nrịbama platen. Otú ọ dị, ọ bụrụ na mbipụta ahụ adịghị ike n'otu akụkụ nke mgbasa ozi, ma ọ bụ ọ bụrụ na rịbọn nnyefe thermal amalite ịrị elu (gosiri site na eriri ọcha na-ebipụtaghị n'akụkụ ntụziaka ndepụta mgbasa ozi), ọ nwere ike ịdị mkpa iji dozie nrụgide nke isi mbipụta.
Cheta na: Tupu ihazigharị nrụgide nke isi mbipụta, gbalịa ịkwaga igbe nguzozi dị na mpụta dị ka akọwara n'usoro nhazi nrịbama Printhead gara aga.
Ka ịhazie nrụgide ebipụta akwụkwọ
1 Mepee ọnụ ụzọ akụkụ.
2 Wepu rịbọn ahụ.
3 Welie isi mbipụta ahụ site n'ịwepụ lever printhead wee tụgharịa ya otu ụzọ n'ụzọ anọ nke ntụgharị ihu n'aka elekere.
.

5 Tinye isi nbipụta wee buru rịbọn ahụ.
6 Nwalee ma dozie ma ọ dị mkpa. (Ndụmọdụ: Jiri mgbasa ozi thermal ozugbo ka ịzenarị nbudata na ibutu rịbọn ọtụtụ oge.)
Na-edozi ahịrị ntụpọ Printhead
Mgbe ị na-eji mgbasa ozi siri ike ma ọ bụ nke siri ike, ọ dị mkpa ibugharị isi akwụkwọ n'ihu ka ahịrị ntụpọ ahụ kwekọọ nke ọma na elu nke ihe nrịbama platen. Ọ dịkwa mkpa ijide n'aka na ahịrị ntụpọ printhead na rola platen na-adakọ.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Ka ịhazie ahịrị ntụpọ isi mbipụta 1 Mepee ọnụ ụzọ akụkụ. 2 Wepu rịbọn ma tinye isi n'akwụkwọ. 3 Jiri screwdriver kwụ ọtọ ka tụgharịa skru abụọ ahụ na
n'elu akara nbipụta akwụkwọ n'akụkụ elekere otu ntụgharị.
4 Welie isi mbipụta ahụ site na ịdọrọ lever printhead wee tụgharịa ya n'akụkụ elekere n'akụkụ elekere otu ụzọ n'ụzọ anọ nke ntụgharị.
5 Jiri nlezianya tụgharịa skru abụọ ahụ n'ihu nke printhead na elekere elekere otu ụzọ n'ụzọ anọ nke ntụgharị n'otu oge (ntụgharị zuru ezu kwekọrọ na 0.55 mm, nke bụ ọtụtụ). Gbaa mbọ hụ na ịmezigharị otu na skru abụọ ahụ. Ọ bụrụ na ị maghị, mee ka skru abụọ ahụ sie ike site na ịtụgharị ha na elekere elekere ka ha na-aga wee malite ọzọ.

6 Tinye isi ihe nbipụta wee kpọchie ya site na imechi skru abụọ dị n'elu braket isi akwụkwọ, ya bụ, mmegharị azụ nke Nzọụkwụ 3.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
7 Tinye rịbọn (ọ bụrụ na ọ bụla).
8 Nwalee ma dozie ma ọ dị mkpa. (Ndụmọdụ: Jiri mgbasa ozi thermal ozugbo ka ịzenarị nbudata na ibutu rịbọn ọtụtụ oge.)
Na-edozi ihe mmetụta oghere Label
Ihe mmetụta akara / akara akara ojii (nke a na-akpọkwa Label Stop Sensor ma ọ bụ LSS) bụ ihe mmetụta fotoelectric nke na-achịkwa nri mgbasa ozi site na ịchọpụta oghere n'etiti akara, ma ọ bụ oghere ma ọ bụ akara ojii na ngwaahịa na-aga n'ihu. Nke a na-achọ ihe mmetụta oghere akara ka ọ kwekọọ na oghere, oghere ma ọ bụ akara na mgbasa ozi. Ọ bụrụ na ị na-eji akara aha na-adịghị agbanwe agbanwe, kwado ihe mmetụta ahụ n'ọnụ ihu nke akara ndị ahụ.
Ka ịhazie oghere ihe mmetụta akara akara
1 Jiri lever sensọ dị n'azụ nke usoro mbipụta ka ibugharịa ihe mmetụta n'ime ma ọ bụ apụta.

Sensọ lever
2 Lelee ebe achọpụtara site n'ihu (na-ebuliri isi mbipụta.)

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute

Ebe nchọpụta
Ọ bụrụ na ị na-enwe nsogbu nchọta, ị nwere ike nwalee LSS na ọnọdụ nhazi. Nnwale ndị ahụ nwere ike ikpebi ma ọ bụrụ na ihe mmetụta ahụ adịghị n'ọnọdụ, ọ bụrụ na ejiri uzuzu kpuchie ya ma ọ bụ akara ndị rapaara, ma ọ bụ nwere nkwarụ n'ụzọ ụfọdụ. Enwere ọrụ nnwale abụọ: · LSS Auto nke a bụ ọkọlọtọ ọrụ maka ịlele na
akara nkwụsị ihe mmetụta na-arụ ọrụ nke ọma ma nwee ike ịchọpụta oghere, oghere na akara ojii. Akwụkwọ ntuziaka LSS na-egosi ntọala sensọ nke Testfeed kacha ọhụrụ hiwere. Ọ dịkwa ike ịnwale ntọala ndị ọzọ. Ezubere akwụkwọ ntuziaka LSS maka ọrụ, akọwaghị ya n'akwụkwọ a. Ka iji rụọ ọrụ nnwale akpaaka LSS 1 Lelee na edobere ngwa nbipute nke ọma maka ụdị mgbasa ozi etinyere na ngwa nbipute (Ntọlite ( ) > Mgbasa ozi > Ụdị mgbasa ozi). 2 Pịa ndepụta ule ( ). 3 Jide n'aka na enwere labelnot a gap ma ọ bụ mgbet ihe mmetụta ("ebe nchọpụta" dị ka akọwara n'elu) 4 Lelee na mgbasa ozi na-agba ọsọ n'akụkụ etiti nke ngwa nbipute ka ndị nduzi kwere. 5 Pịa Ntọala ( ).

Nwalee

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
6 Gaa na Bipute Defs > Nnwale LSS > Nchekwa LSS. Ekwesịrị itinye cursor na etiti, dị ka n'okpuru.
LSS akpaaka

7 Nchọpụta oghere ma ọ bụ oghere: welie isi mbipụta wee wepụta nwayọ nwayọ (na ntụzịaka ndepụta mgbasa ozi). Mgbe LSS chọpụtara oghere ma ọ bụ oghere nchọpụta, cursor na-aga n'aka nri.
LSS akpaaka

8 Nchọpụta akara ojii: welie isi mbipụta wee wepụta nwayọ nwayọ (na ntụzịaka ndepụta mgbasa ozi). Mgbe LSS chọpụtara akara ojii, cursor na-aga n'aka ekpe.
LSS akpaaka

9 Ọ bụrụ na cursor na-eme omume dịka akọwara na Nzọụkwụ 7 na 8, LSS na-arụ ọrụ ma kwekọọ nke ọma na oghere, oghere ma ọ bụ akara ojii.
10 Ọ bụrụ na cursor anaghị emeghachi omume na oghere, oghere ma ọ bụ akara ojii, jikwaa ihe ndị a:
LSS ọ dabara n'akụkụ oghere ma ọ bụ akara ojii?

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
A na-ebufe rịbọn nke ọma ka ọ ghara igbochi LSS? (lee “Na-ebunye Ribbon Nfefe Thermal” na ibe 19).
Ntuziaka LSS ọ dị ọcha, ma ọ bụ enwere akara akụkụ ma ọ bụ ihe fọdụrụ rapaara na ha? Ọ bụrụ otu a, hichaa dị ka akọwara na ngalaba na-esote.
· Mgbasa ozi nwere ụdị mpempe akwụkwọ nke nwere ike ime ka nchọpụta sie ike karị?
Ọ dị ntakịrị ọdịiche dị n'etiti akara ojii na mpaghara gbara ya gburugburu?
Ihe akara labelụ ezughị oke?
LSS ọ na-arụ ọrụ na ụdị mgbasa ozi ọzọ? (Cheta ka ịgbanwee ntọlite ụdị mgbasa ozi wee mee ihe nlele ọhụrụ.)
Na-edobe ngwa nbipute
Iji nweta nnukwu nrụpụta yana ogologo ndụ maka ngwa nbipute gị, Intermec na-atụ aro ka ị na-enyocha ngwa nbipute na gburugburu ya mgbe niile iji hụ na a na-arụ ya n'okpuru ọnọdụ kacha mma.
Debe ngwa nbipute ahụ n'ebe kpọrọ nkụ, pụọ na nnukwu moto eletriki, welders na ihe ndị yiri ya nke nwere ike imetụta ọrụ nbipute.
Na-asachapụ ngwa nbipute gị mgbe niile, dị ka akọwara na usoro dị n'okpuru ebe a, iji kwado ogo nke akara gị ma gbasaa ndụ nke ngwa nbipute gị.
Ọ bụrụ na imepee mkpuchi elektrọnik, ị ga-emebi akwụkwọ ikike ma nwee ike mebie ihe ndị dị n'ime. Imepe mkpuchi elektrọnik na-ekpughe onye ọrụ ihe egwu dị egwu nke nwere ike ibute mmerụ ahụ ma ọ bụ ọnwụ.
Wepụ eriri ọkụ mgbe niile tupu ihicha ngwa nbipute.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Na-ehicha isi ihe nbipụta
Ihicha isi akwụkwọ mgbe niile na-agbatị ndụ nke isi mbipụta ma hụ na ị na-edobe ogo mbipụta dị elu. Ị ga-eji kaadị ihicha ma ọ bụ swab owu nke mmanya isopropyl hichaa isi akwụkwọ. Dị ka o kwesịrị, ị ga-eme nke a oge ọ bụla ị na-ebufe rịbọn mbufe ọhụrụ.
Alcohol isopropyl [(CH3) 2CHOH] bụ ihe na-agba ọkụ nke ukwuu, na-egbu egbu na-adịchaghị mma, yana ihe na-akpasu iwe.
Iji hichaa isi mbipụta 1 Mepee ọnụ ụzọ akụkụ. 2 Wepu mgbasa ozi na rịbọn. 3 Wepụ eriri isi akwụkwọ wee tụgharịa ya na elekere elekere a
nkeji iri na ise nke ntụgharị. 4 Jiri kaadị nhicha ma ọ bụ swab dị nro nke ejiri mmiri mee mmiri
mmanya isopropyl iji gbazee mmetọ ọ bụla n'ahịrị nke ntụpọ na-ekpo ọkụ n'ihu / ala nke isi mbipụta. 5 Chere 30 sekọnd wee jiri nlezianya hichapụ mmetọ ọ bụla. Tinyegharịa ma ọ dị mkpa.
Ejila ngwa ọ bụla siri ike ma ọ bụ dị nkọ kpochapụ aha ndị rapaara ma ọ bụ ihe yiri ya. Isi mbipụta ahụ dị nro ma nwee ike imebi ngwa ngwa.
6 Kwe ka isi nbipụta kpọọ nkụ maka otu nkeji ma ọ bụ karịa tupu ịkwanye mgbasa ozi na rịbọn ọhụrụ.

EasyCoder PD42 Ntuziaka onye nbipute

Isi nke 4 - Nchọpụta nsogbu na idobe ngwa nbipute
Na-ehicha Ụlọ Mgbasa Ozi
ihicha ụlọ mgbasa ozi nke ngwa nbipute mgbe niile na-eme ka ọrụ obibi akwụkwọ dị nro ma na-ezere nsogbu na mkpọ mgbasa ozi. Jiri akwa dị nro na mmiri mmiri isopropyl dị ọcha n'ime ngwa nbipute. Jide n'aka na ị ga-edobe akụkụ ndị a ọcha: · Driver Roller and Tear Bar · Ntuziaka akụkụ mgbasa ozi na ụzọ mgbasa ozi · Sensọ akara.
Isopropyl mmanya [(CH3) 2CHOH; CAS67-63-0] bụ ihe na-agba ọkụ nke ukwuu, na-egbu egbu na-egbu egbu, na nke na-akpasu iwe.
Ọ bụrụ na e nwere akara ndị rapaara, ma ọ bụ nrapado nke fọdụrụ na labelụ, jiri mkpịsị aka gị bee ka o kwere mee, wee jiri mmanya isopropyl gbazee nrapado fọdụrụnụ.
Na-ehicha Mpụga nke ngwa nbipute
Jide n'aka na ị na-edebe mpụta nke ngwa nbipute ahụ, nke a ga-ebelata ihe ize ndụ nke uzuzu ma ọ bụ ihe ndị mba ọzọ na-erute n'ime ngwa nbipute ma na-emetụta ọrụ ngwa nbipute. Jiri akwa dị nro, nke nwere ike mee ya na mmiri ma ọ bụ ncha dị nro mgbe ị na-ehicha ngwa nbipute na mpụga. Jide n'aka na ịdokwa elu nke gbara ya gburugburu na-adị ọcha nke ọma.
Ọ bụrụ na a na-eji ngwa nbipute na gburugburu ebe a na-ehicha ụlọ ahụ site na mmiri mmiri ma ọ bụ uzuoku, bugharịa ngwa nbipute ahụ gaa n'ọnụ ụlọ ọzọ ma ọ bụ kpuchie ya nke ọma na mpempe akwụkwọ plastik wee hụ na eriri ọkụ ahụ kwụsịrị.

EasyCoder PD42 Ntuziaka onye nbipute

Nkọwapụta, Interface, na Nhọrọ
Ihe mgbakwunye a nwere nkọwapụta teknụzụ izugbe, yana ozi gbasara oghere nbipute yana nhọrọ dị.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ
Nkọwapụta ngwa nbipute

Nkọwapụta ngwa nbipute

Akụkụ anụ ahụ

Akụkụ (WxLxH) 276 x 454.4 x 283.0 mm (10.9 x 17.9 x 11.2 in)

Ibu (Ewezuga mgbasa ozi) 13 n'arọ (paụnd 28.7)

Nleba ntinye ọkụ ọkụ oriri ike

~ 100-240V 2-1A 50/60 Hz
· Njikere: 12 W · Arụ ọrụ nkịtị / ibipụta: 80 W · Ọnụ: 250 inW

Mbipụta

Usoro mbipụta

Nyefee ozugbo okpomọkụ/ọkụ

Mkpebi isi mbipụta 8 ntụpọ/mm (203.2 dpi) ma ọ bụ 11.8 ntụpọ/mm (300 dpi)
Bipụta ọsọ 8 ntụpọ/mm (203 dpi) 50.8 ruo 152.4 mm/skịta (2 ruo 6 in/sk) 11.8 dots/mm (300dpi) 50.8 ruo 101.6 mm/sec (2 ruo 4 in/sk) Bipụta obosara Max. 8 ntụpọ/mm (203 dpi) 104 mm (4.1 na) 11.8 ntụpọ/mm (300dpi) 105.7 mm (4.2 in)

Ogologo bipụta kacha. Mkpịsị aka mkpịsị aka 8 ntụpọ/mm (203 dpi) 1270 mm (50 na) 11.8 ntụpọ/mm (300dpi) 558.2 mm (22 in)

IPL 600 mm (23 na) 406.4 mm (16 inch)

Ụdị ọrụ

Adọkapụ (nke kwụ ọtọ)
Bepụ
Apụpụ (nkwụsị onwe ya)

Ee
Nhọrọ na cutter Nhọrọ na esịtidem rewinder

Firmware (akara mkpịsị aka)

Sistemụ nrụọrụ

Mkpịsị aka mkpisiaka v10.xx na-agụnye Protocol Direct

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ

Nkọwapụta ngwa nbipute (na-aga n'ihu)

Ederede dị nro

Ụdị mkpụrụedemede TrueType na TrueDoc

Fonts ndị nwere ike ibi 15

Ntọala agwa

· 23 otu-byte agwa na-esetịpụ ọkọlọtọ.

· Nkwado UTF-8 dị ka ọkọlọtọ.

Koodu ebe obibi 61

Firmware (IPL)

Sistemụ nrụọrụ

IPL v10.xx

Ederede dị nro

Ụdị mkpụrụedemede TrueType na TrueDoc

Fonts ndị nwere ike ịdị ndụ 13 (+21 bitmap simulated)

Ntọala agwa

· 23 otu-byte agwa na-esetịpụ ọkọlọtọ

· Nkwado UTF-8 dị ka ọkọlọtọ

Koodu ebe obibi 31

gburugburu

Okpomọkụ na-arụ ọrụ +5°C ruo +40°C (+41°F ruo 104°F)

Okpomọkụ nchekwa -20°C ruo 70°C (-4°F ruo 122°F)

iru mmiri na-arụ ọrụ 20 ruo 80% na-abụghị condensing

iru mmiri nchekwa

10 ruo 90% na-abụghị condensing

Mgbasa ozi

Obosara mgbasa ozi Dayameta mpịakọta mgbasa ozi

25 ruo 118 mm (1 ruo 4.6 na) Max 114 mm (4.5 in) nwere ihe nchacha 213 mm (8.4 na) kacha. 190 mm (7.5 inch) nwere rewinder ime

Dayameta rewinder dị n'ime
Mgbasa ozi mpịakọta isi dayameta
Ọkpụrụkpụ mgbasa ozi

Oke 140 mm (5.51 na) 38.1 ruo 76.2 mm (1.5 ruo 3 na) 60 m ruo 250 m (mils 2.3 ruo 9.8)

Nyefee Ribbon

Ihe ikuku ikuku

Wax, ngwakọ, ma ọ bụ resin ink n'ime ma ọ bụ n'èzí akwụkwọ mpịakọta

Obosara rịbọn
Dayameta mpịakọta rịbọn (mpụta)

30 ruo 110 mm (1.18 ruo 4.33 inch)
76 mm (2.99 in) dabara na 450 m (1471 ft) nke rịbọn.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ

Nkọwapụta ngwa nbipute (na-aga n'ihu)

Dayameta isi n'ime 25.2 ruo 25.6 mm (1 inch)

Ihe mmetụta

Akara akara/akara ojii/ Ee na mgbasa ozi enweghị

Ebuliri isi mbipụta

Ewere akara

Ngwunye rịbọn

Njikwa

Ngosipụta eserese Igodo egosi LED

LCD, 240*160 pikselụ nwere ike ọkụ azụ LED, Data/Njikere, Njehie, Njikere na-arụ ọrụTM 1 Bọtịnụ Bipụta + 5 Igodo dị nro

Eletrọnịkị

Microprocessor

ARM 9

Ebe nchekwa ọkọlọtọ

8 MB flash, 16 MB SDRAM.

Ọnụ ụzọ

RS-232 serial USB Ethernet IEEE 1284 yiri CompactFlash USB host

Ee Ee Nhọrọ Nhọrọ Ee Ee

Ngwa na Nhọrọ

Ntugharị ime na ihe nrụnye Cutter Printhead 203/300 dpi EasyLAN ethernet interface Parallel IEEE 1284 interface ezigbo oge elekere.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ

Ọnụ ụzọ
Akụkụ a na-akọwa ọkọlọtọ ọkọlọtọ, yana ngwa nhọrọ na-agbakwunye ọrụ na EasyCoder PD42 gị.
Interface Serial RS-232
Protocol

Oke
Ọnụego Baud Ogologo Character Length Parity Kwụsị ibe n'ikwe aka

Ọdabara
9600 8 bits Ọ dịghị 1 XON/XOFF na RTS/CTS

Ka ịgbanwee ntọala usoro, lee Isi nke 3, “Ịhazi ngwa nbipute.”
USB Interface
Ọgwụgwụ kọmputa nke eriri ahụ dabere na ụdị kọmputa. Ọgwụgwụ ngwa nbipute bụ plọg DB9, dị ka egosiri n'okpuru.

1 2 34 5 6789
RS-232 DB9 atụdo

DB-9
1 2 3 4 5 6 7 8 9

Signal
TXD RXD
GND
Ọnụahịa kasị elu nke CTS RTS

Pụtara Mpụga +5V DC Max 500 mA Nyefee data Nweta data
Ala
Kpochapụ arịrịọ izipu

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ

USB Interface

Ihe nbipute na-akwado USB v1.1 (a na-akpọkwa USB 2.0 zuru oke). Iji jiri interface USB bipụta site na PC, ịkwesịrị ịwụnye ọkwọ ụgbọ ala USB Intermec na PC gị. Ị ga-ahụ onye ọkwọ ụgbọ ala a (InterDriver) na CD PrinterCompanion yana ntuziaka nwụnye.
Ihe nbipute bụ “ngwaọrụ ejiri aka ya rụọ ọrụ.” Intermec na-atụ aro ka ị jikọọ otu ngwa nbipute na ọdụ ụgbọ USB ọ bụla na onye ọbịa, ma ọ bụ ozugbo ma ọ bụ site na oghere. Ngwaọrụ ndị ọzọ, dị ka ahụigodo na òké, nwere ike jikọọ na otu oghere. Ọ bụrụ na ịchọrọ karịa otu ngwa nbipute USB Intermec maka onye ọbịa, ị ga-eji ọdụ ụgbọ USB dị iche iche.
Igwe USB gụnyere ya na EasyCoder PD42 nwere njikọ USB Ụdị A n'otu njedebe iji jikọọ na PC, yana njikọ USB Ụdị B iji jikọọ na ngwa nbipute.
Enweghị nhazi nkwukọrịta maka ọdụ ụgbọ mmiri USB.

Njikọ USB Ụdị A (Jikọọ na PC ma ọ bụ Hub)

Njikọ USB Ụdị B (Na-ejikọta na ngwa nbipute)

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ
USB Host Interface
Ejiri ngwa nbipute PD42 nwere interface nnabata USB, nke pụtara na ị nwere ike jikọọ ngwaọrụ USB dị iche iche (nyocha koodu mmanya na ahụigodo nke ụdị HID, mkpanaka ebe nchekwa na ọdụ USB) maka iji ngwa nbipute.

Ntụtụ

Ọrụ

V-BUS

D-

D+

Gnd

EasyLAN Ethernet interface
Ihe interface EasyLAN Ethernet nwere oghere RJ-45 maka iji ya na eriri RJ-45 ọkọlọtọ. Ngwa ahụ na-akwado 10/100 Mbps Fast Ethernet (10BASE-T, 100BASE-TX) ma kwekọọ n'ụzọ zuru ezu na ọkọlọtọ IEEE 802.3u. Enwere ike ịhụ adreesị MAC kaadị netwọk na akara n'okpuru oghere.

Ọnọdụ netwọkụ LEDs Ethernet RJ-45 soket

Ethernet RJ-45 njikọ

Otu odo odo na otu LED green na-egosi ọkwa netwọkụ dị ka ndị a:

Igwe ọkụ Ọnọdụ netwọkụ

Acha odo odo

Gbanyụọ na-egbuke egbuke

Gbanyụọ

Njikọ Enweghị njikọ Ọrụ 100BASE-TX 10BASE-T

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ
Ihe nlere anya IEEE 1284
Ọdụ ụgbọ mmiri ahụ na-akwado plug-n-play Windows yana ọkwa ọkwa agbakwunyere site na IEEE 1284 nibble ID mode.
USB Interface
Eriri (ọchichi) eriri dakọtara na PC.

Ntụtụ
1 2-9 10 11 12 13 14 15-16 17 18 19-30 31 32 33 34-35 36

Ọrụ

Nnyefe

nStrobe

onye ọbịa

Data 0-7

onye ọbịa

Nkwenye ngwa nbipute

Na-arụ ọrụ

ngwa nbipute

Ụjọ

ngwa nbipute

Họrọ

ngwa nbipute

nAutoFd

Ejikọtaghị ya

Ala chassis

Mpụga +5V DC

Ala mgbaama

nInit

nFault

ngwa nbipute

Ala mgbaama

Ejikọtaghị ya

nSelectln

Ikwu okwu Max 500mA

Nhọrọ
Akụkụ a na-akọwa nhọrọ na-agbakwunye ọrụ na ngwa nbipute EasyCoder PD42 gị. Maka nkọwa zuru ezu na ntuziaka nrụnye, hụ akwụkwọ ntuziaka nwụnye maka ngwa ọ bụla. Biko mara na ọtụtụ n'ime nhọrọ ndị a nwere ike ịwụnye naanị ụlọ ọrụ mmepụta ihe ma ọ bụ tinye ya site n'aka onye na-ahụ maka ọrụ ikike.
EasyLAN Ethernet interface
Ngwa EasyLAN Ethernet Interface ngwa na-agbakwunye ike netwọk na ngwa nbipute gị. Lee “EasyLAN Ethernet Interface” na ibe 65.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ
Ihe nlere anya IEEE 1284
Ngwa a na-agbakwunye ọdụ ụgbọ mmiri Parallel IEEE 1284 na ngwa nbipute gị. Lee “Nyiri IEEE 1284 Interface” na ibe 66.
Ngwa cutter
Emebere cutter ka ebipụ ngwaahịa ma ọ bụ liner dabere na akwụkwọ na-aga n'ihu n'etiti akara. Enwere ike ijikwa mpempe akwụkwọ na-eji ntuziaka CUT, CUT ON na CUT OFF na Mkpịsị aka (na Direct Protocol).
Ntugharị nke ime
Ngwa nke Internal Rewinder (na Batch Takeup) bụ ngwaọrụ nhọrọ maka ịrụ ọrụ peel-off (nkewa nke onwe), nke pụtara na a na-ekewapụta akara ndị ahụ na liner (akwụkwọ nkwado) mgbe ebipụtachara na liner ahụ merụrụ ahụ n'ime oghere dị n'ime. (Lee “Ibu Ibu Mgbasa Ozi maka Nchapụta (Self-Strip) Ọrụ” na ibe 17.). Enwere ike iji ya na-atụgharị akwụkwọ mpịakọta aha zuru oke. Ngalaba ahụ gụnyekwara ogwe ndu.
Kit isi mbipụta
Enwere ike itinye ihe nbipute ahụ ma ọ bụ 203 dpi ma ọ bụ 300 dpi printhead. Isi ihe nbipụta ndị a na-eji PCB dị iche iche (Boọdụ Circuit Ebipụtara). Ngwa obibi akwụkwọ dị ka ngwa nnọchi (naanị isi mbipụta), ma ọ bụ dị ka ngwa zuru oke (printhead gbakwunyere PCB).
Ezigbo Oge elekere
Real time clock circuit (RTC) na-ebelata onye ọrụ ma ọ bụ onye ọbịa ka ọ ghara ịtọ elekere / kalenda site na iji ntuziaka mkpịsị aka Intermec DATE $ na TIME$ mgbe ike ọ bụla gasịrị. RTC nwere batrị ndabere nke ya nke ga-adịru afọ 10 ma ọ bụ karịa.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye A — Nkọwapụta, ihu, na nhọrọ

EasyCoder PD42 Ntuziaka onye nbipute

Nkọwapụta mgbasa ozi B
Ihe mgbakwunye a na-akọwa ụdị mgbasa ozi dị iche iche EasyCoder PD42 nwere ike iji rụọ ọrụ, wee kwuo akụkụ ndị ekwenyere nke akwụkwọ, rịbọn na mpịakọta. Ihe mgbakwunye a na-ekpuchi isiokwu ndị a: · Ogo mpịakọta mgbasa ozi · Ụdị akwụkwọ na nha

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Nha Mpịakọta Mgbasa ozi
Akwụkwọ mgbasa ozi ga-agbasorịrị akụkụ ndị a:

Akwụkwọ mpịakọta Core

Akụkụ Mpịakọta Mgbasa ozi

Dayameta: Obosara

38 ruo 76.2 mm (1.5 ruo 3 sentimita) Agaghị apụ apụ na mpụga mgbasa ozi.

Oke. dayameta diamater Max nwere rewinder ime Max. obosara Max. obosara ya na cutter Min. obosara Ọkpụrụkpụ

212 mm 190 mm

8.35 sentimita asatọ 7.5 sentimita asatọ

118 mm 114 mm
25 mm 60 ruo 250 m

4.65 sentimita 4.49 inch 1.00 inch 2.3 ruo 9.8 mil

Enwere ike iji mgbasa ozi siri ike, mana ogo mbipụta ga-ebelata. isi ike dịkwa mkpa, na a ga-edozirịrị megide ọkpụrụkpụ iji nọgide na-ebi akwụkwọ.

EasyCoder PD42 Ntuziaka onye nbipute

Nha rịbọn

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
A gaghị ekpughe ihe mgbasa ozi na ájá, uzuzu, grit wdg. Ihe ọ bụla siri ike, n'agbanyeghị obere ntakịrị, nwere ike imebi isi akwụkwọ.

Isi nke rịbọn ahụ ga-abụrịrị 25.2-25.6 mm (1 inch), dị ka eriri rịbọn efu gụnyere n'ime igbe ahụ. Akụkụ mpụta nke mpịakọta rịbọn nwere ike ịbụ:

Oke. dayameta Max. obosara Min. obosara

76 mm 110 mm
30 mm

2.99 sentimita asatọ 4.33 inch 1.18 inch

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Ụdị akwụkwọ na nha
Mwepu na-enweghị nrapado

a: Mgbasa ozi Kachasị: Opekempe:

118.0 mm 25.0 mm

Ntọlite Ụdị Akwụkwọ
· Mgbanwe ogologo warara
· Ebido ogologo ogologo

4.65 sentimita asatọ 1.00 sentimita asatọ

ỤWA NA-AKWỤKWỌ NA-AKWỤKWỌ

Mwepu na-enweghị nrapado

EasyCoder PD42 Ntuziaka onye nbipute

Mwepu na-ejide onwe ya
a: Mgbasa ozi Kachasị: Opekempe:

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi

118.0 mm 25.0 mm

4.65 sentimita asatọ 1.00 sentimita asatọ

b: nkwo
Ihe mkpuchi ahụ ga-agbatịrịrị n'akụkụ abụọ ma ọ bụghị karịa ngụkọta nke 1.6 mm (0.06) sentimita n'èzí ihe ihu.

c: Ogologo mgbasa ozi (ewezuga liner)

Kacha: Opekempe:

116.4 mm 23.8 mm

Ntọlite Ụdị Akwụkwọ
· Mgbanwe ogologo warara
· Ebido ogologo ogologo

4.58 sentimita asatọ 0.94 sentimita asatọ

ỤWA NA-ECHICHE ONWE ONYE

Mwepu na-ejide onwe ya

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Akara nrapado onwe
a: Mgbasa ozi Kachasị: Opekempe:

118.0 mm 25.0 mm

4.65 sentimita asatọ 1.00 sentimita asatọ

b: nkwo
Ihe mkpuchi ahụ ga-agbatịrịrị n'akụkụ abụọ ma ọ bụghị karịa ngụkọta nke 1.6 mm (0.06) sentimita n'èzí ihe ihu.

c: Obosara akara (ewezuga Liner)

Kacha: Opekempe:

116.4 mm 23.8 mm

4.58 sentimita asatọ 0.94 sentimita asatọ

d: Ogologo akara
8 ntụpọ/mm (203 dpi) Kachasị: Opekempe: 11.81 ntụpọ/mm (300 dpi) Kacha: Opekempe:

Mkpịsị aka

IPL

1270 mm (50 inch.)* 600 mm (23 in.)

6 mm (0.2 inch)

558.8 mm (22 inch.)* 406.4 mm (16 in.)

6 mm (0.2 inch)

* Nke a bụ oke ogologo ebipụta ka mmachi ebe nchekwa setịpụrụ.

e: Akara akara
Kacha: Opekempe: Akwadoro:

26.0 mm 1.2 mm 3.0 mm

1.02 sentimita asatọ 0.05 inch 0.12 inch

Ihe mmetụta Label Gap ga-enwerịrị ike ịchọpụta ihu ihu nke akara ndị ahụ. Enwere ike ibugharị ya 0 ruo 57 mm (0 ruo 2.24 sentimita) site na nsọtụ nke mgbasa ozi.
Ntọlite Ụdị Akwụkwọ
· Akara akara nwere oghere

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi ac

d
e
AKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊWA ONWE ONYE ONWE ONYE ONYE

Ntuziaka nri
Akara nrapado onwe

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Tiketi nwere oghere
a: Mgbasa ozi Kachasị: Opekempe:

118.0 mm 25.0 mm

4.65 sentimita asatọ 1.00 sentimita asatọ

b: Ogologo idetu
8 ntụpọ/mm (203 dpi) Kachasị: Opekempe: 11.81 ntụpọ/mm (300 dpi) Kacha: Opekempe:

Mkpịsị aka

IPL

1270 mm (50 in.)* 600 mm (23 in.) 6 mm (0.2 in.) 6 mm (0.2 in.)
558.8 mm (22 in.)* 406.4 mm (16 in.) 6 mm (0.2 in.) 6 mm (0.2 in.)

* Nke a bụ oke ogologo ebipụta ka mmachi ebe nchekwa setịpụrụ.

c: Ọnọdụ nchọpụta

mgbanwe:

0 ruo 57 mm 0 ruo 2.24 sentimita asatọ

d: Ogologo Nchọpụta Slit
Ogologo slit nchọpụta (ewezuga radius nkuku) ga-abụrịrị opekempe 2.5 mm (0.10 sentimita) n'akụkụ abụọ nke ọnọdụ nchọpụta ahụ.

e: Nchọpụta Slit Height
Kacha: Opekempe: Akwadoro:

26.0 mm 1.2 mm 3.0 mm

1.02 sentimita asatọ 0.05 inch 0.12 inch

Ntọlite Ụdị Akwụkwọ
· Tiketi nwere oghere

Mara: Ekwela ka perforation ọ bụla gbajie nsọtụ mgbasa ozi n'ihi na nke a nwere ike ime ka mgbasa ozi kewaa wee mechie ngwa nbipute.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi a
bc
ed
Tiketi & TAGS
Tiketi ntụzi aka nri nwere oghere

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Tiketi na Black Mark
a: Mgbasa ozi Kachasị: Opekempe:

118.0 mm 25.0 mm

4.65 sentimita asatọ 1.00 sentimita asatọ

b: Ogologo idetu

Mkpịsị aka

IPL

8 ntụpọ/mm (203 dpi) Kachasị: Opekempe: 11.81 ntụpọ/mm (300 dpi) Kacha: Opekempe:

1270 mm (50 inch.)* 6 mm (0.2 in.)
558.8 mm (22 inch.)* 6 mm (0.2 in.)

600 mm (23 na.) 6 mm (0.2 na.)
406.4 mm (16 na.) 6 mm (0.2 na.)

* Nke a bụ oke ogologo ebipụta ka mmachi ebe nchekwa setịpụrụ.

c: Ọnọdụ nchọpụta

mgbanwe:

0 ruo 57 mm 0 ruo 2.24 sentimita asatọ

d: Black Mark Obosara
Obosara achọpụtara nke akara ojii kwesịrị ịdịkarịa ala 5.0 mm (0.2 sentimita) n'akụkụ abụọ nke ebe nchọpụta Label Gap Sensor.

e: Black Mark Ogologo
Kacha: Opekempe: Ọtụtụ:

25.0 mm 3 mm 5 mm

0.98 sentimita asatọ 0.12 sentimita asatọ
0.2 sentimita asatọ

f: Black Mark Y-Ọnọdụ
A na-atụ aro ka itinye akara ojii dị ka nso n'ihu tiketi dị ka o kwere mee ma jiri uru Kwụsị Agbanwe na-adịghị mma iji chịkwaa ndepụta mgbasa ozi, ka enwere ike ịdọpụ tiketi ndị ahụ nke ọma.
Ntọlite Ụdị Akwụkwọ
· Tiketi nwere Mark

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi
Mara: Ekwesịrị ịzenarị mbipụta nke nwere ike igbochi nchọpụta akara ojii.
Mara: Akara ojii kwesịrị ịbụ oji carbon na-abụghị nke na-egosipụta n'okirikiri ọcha ma ọ bụ nso na-acha ọcha. Ekwela ka perforation ọ bụla gbajie nsọtụ nke mgbasa ozi n'ihi na nke a nwere ike ime ka mgbasa ozi kewaa ma mechie ngwa nbipute.
a

e df

Tiketi nwere akara

Ntuziaka nri
Tiketi na Black Mark

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye B — Nkọwapụta mgbasa ozi

EasyCoder PD42 Ntuziaka onye nbipute

Nhazi C nhazi (akara mkpịsị aka)
Ihe mgbakwunye a na-edepụta usoro ntọala niile ị nwere ike hazie ka ọ dabara na gburugburu ebe ị na-arụ ọrụ. Ihe mgbakwunye a kpuchiri isiokwu ndị a: · Nkọwa ntọala · Ịgagharị n'osisi ntọlite · Usoro nkwukọrịta okwu · Ntọlite com · Ntọala emulation · Nhazi nhazi nri · Ntọala mgbasa ozi · Bipụta Defs Ntọala · Ntọala netwọkụ

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Nkọwa nhazi
Mpempe ntọala nke ngwa nbipute na-achịkwa ka ngwa nbipute si arụ ọrụ. Enwere ike ịnweta ma gbanwee ntọala ntọala ahụ n'ụzọ dị iche iche, lee "Ntọala Nhazi Na-agbanwe" na ibe 31 maka ozi ndị ọzọ.
Mara: Ụzọ akwadoro isi ịtọ ntọala nhazi ngwa nbipute gị bụ iji mmemme PrintSet 4, nke etinyere na CD PrinterCompanion. PrintSet 4 nwere ike ikwurịta okwu na ngwa nbipute gị site na eriri serial ma ọ bụ njikọ netwọk.
Na-agagharị n'Osisi Ntọlite
Akụkụ a na-enye ihe nfeview nke alaka na ọnụ na osisi ntọala, dị ka a na-egosi ya na windo ngosi.
Mara: E gosipụtara osisi ntọlite ka ọ dị na mkpịsị aka 10.2.0. Igbe nwere ntụpọ na-egosi atụmatụ dị naanị na ngwa nbipute nwere akụrụngwa nhọrọ. Igbe nwere okpokolo agba na-egosi ntọala ndabara. Enwere ike gbanwee uru dị n'ime brackets ka ọ bụrụ uru ọ bụla onye ọrụ kwuru.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ụdị nhazi: Nkwukọrịta Oghere Usoro (Ser-com, Uart1)

Nhazi: SER-COM, UART1

SER-COM, UART1: BAUDRATE

SER-COM, UART1: Ogologo oge

SER-COM, UART1: PARITY

SER-COM, UART1: Kwụsị BITS

SER-COM, UART1: FLOWCONTROL

BAUDRATE;

Ogologo oge

96B0A0UDRATE;

8 Ogologo oge

19B2A0U0DRATE;

38B4A0U0DRATE;

57B6A0U0DRATE;

11B5A2U0D0RATE;

30B0AUDRATE;

60B0AUDRATE;

12B0A0UDRATE;

24B0A0UDRATE;

4800

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

NKWUKWU: ONWEGHỊ:
EZINỤLỌ: ODPDARITY: MAPRAKRITY: Oghere

AKWỤKWỌ KWESỊRỊ: 1 KWESỊRỊ:
2
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

ONYE NA-EKWU: RTS/CTS
RTS/CTS: DIESNAQB/LAECK:
Kwado Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Njikwa mmiri: ENQ/ACK
ENQ-ACK: DIESNAQB/LAECK:
Kwado Pịgharịa gaa n'ihu Pịgharịa gaa azụ

SER-COM, UART1: ahịrị ọhụrụ

SER-COM, UART1: REC BUF

Njikwa mmiri: XON/XOFF
XON/XOFF: Data iji anabata
Data iji kwado: DIDSAATALETO HOST:
Kwado Pịgharịa gaa n'ihu Pịgharịa gaa azụ

XON/XOFF: DATA SITE HOST
Data si n'aka onye ọbịa: DIDSAATBALEFROM HOST:
Kwado
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

AHỤRỤ ỌHỤ: CRN/ELWF :
AHỤRỤ LFNE: CR

REC BUF: [1024]:

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

SER-COM, UART1: TRANS BUF
Mbugharị BUF: [1024]:

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ụdị nhazi: Net-com, Net1

Nhazi: NET-COM, NET1
NET-COM, NET1 NEW LINE
ỌHỤRỤ ọhụrụ: CRB/ALUFDRATE;
ỤWA CRNEW: LF
Ụdị nhazi: Com

Nhazi: COM

COM: INTERFACE

COM: eriri USB

INTERFACE: USBBAUDDERVAITCEE;
IEEE 1284

Ahụigodo USB: KEYBOARD USUSB:
SWUESDBISKHEYBOARD: FRUESNBCHKEYBOARD: GERMAN
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụdị nhazi: Emulation

Nhazi: EMULATION
EMUTA: MODE
Ụdị: DIBSAAUBDLREADTE;
E4

NKWUO: KWESỊRỊ
ADJUST: BAASDEJU(SmTm:X10)
Kwụsị (mmX10)

Ụdị nhazi: Nzizi nri

Nhazi: FEEDADJ
FEEDADJ: STARTADJ
STARTADJ: [0]

FEEDADJ: STOPADJ
STOPADJ: [0]:

EasyCoder PD42 Ntuziaka onye nbipute

Ụdị nhazi: Mgbasa ozi

Nhazi: MEDIA
Mgbasa ozi: Nhazi mgbasa ozi
Nha mgbasa ozi: XSTART
XSTART: [0]

Nha mgbasa ozi: Obosara
Obosara: [832]

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

Nha mgbasa ozi: Ogologo
Ogologo: [1243]:

Mgbasa ozi: ỤDỊ mgbasa ozi
Ụdị mgbasa ozi: LMAEBDEILA(TwYPGEA:PS) TMIECDKIEAT T (YwPEM: ARK)
TMIIECDKIEAT T(YwPEG:APS) FMIEXDILAENTGYTPHE:STRIP VAR Ogologo eriri
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Mgbasa ozi: Ụdị akwụkwọ

ỤDỊ akwụkwọ: Nyefee

Nyefee: RIBBON CONSTANT

Nyefee: RIBBON FACTOR

RIBBON adịgide: RIBBON FACTOR:

[90]: [25]

Nyefee: LABEL OFFSET
LABEL OFFSET: [0]:

ỤDỊ AKWỤKWỌ: KWỤKWỌ KWESỊRỊ

Igwe ọkụ kpụ ọkụ n'ọnụ: LABEL CONSTANT

Igwe ọkụ ozugbo: LABEL FACTOR

AKWỤKWỌ NDỊ DỊ KA [85]:

IHE NDỊ AHỤ: [40]:

Mgbasa ozi: Ọdịiche

mgbasa ozi: TESTFEED

Mgbasa ozi: TESTFEED MODE

Mgbasa ozi: LEN (Ọdịda nwayọọ)

Nnwale: [26 28 0 10]

Ọdịiche: +C0O%NTRAST: +C2O%NTRAST:
+C4O%NTRAST: +C6O%NTRAST: +C8O%NTRAST:
+C1O0N%TRAST: -C1O0N%TRAST: -C8O%NTRAST:
-C6O%NTRAST: -C4O%NTRAST: -2%

Pịa ime testfeed. A na-agụ naanị ụkpụrụ.

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụkpụrụ TESTFEED: Ụdị FTAESSTTFEED: Ọ dị nwayọọ
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

LEN (Ụdị nwayọọ): [0]:

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ụdị nhazi: Bipụta Defs

Nhazi: Mbipụta DEFS
NDỊ NA-EKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ
CLIP DEFAULT: OFCFLIP adịghị mma:
ON

NDỊ NA-EKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊAKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWỤKWASỊ

ỌSỤRỤ ebipụta: Ọsọ ebipụta

NKWUKWU EBIBI: Nnwale LSS

Nnwale:

Ọsọ ebipụta:

Nnwale LSS:

DATAEMSOTNPDRSINT:

[100]:

LSS akpaaka

CHTEESSSTRINT:

BATRESTOPDREISNT#:1 BATRESTOPDREISNT#:2

LSS akpaaka:

SETTEUSPTPIRNIFNOT: Ịkpọasị SWTAPREINITN: FO NETWORK INFO

Egosipụtara naanị ma ọ bụrụ na etinyere bọọdụ EasyLAN nhọrọ.

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

ibipụta maka ozi njehie

Ụdị nhazi: netwọk (Nhọrọ)

Nnwale LSS: Akwụkwọ ntuziaka LSS
LSS [G: 2]D: 6
Gbanwee n'etiti uru (G) na mbanye (D)
Wedata/abawanye uru n'ime brackets

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ntọala nkwurịta okwu Oghere Usoro
Usoro nkwurịta okwu serial na-achịkwa nzikọrịta ozi n'etiti ngwa nbipute na kọmputa ejikọrọ ma ọ bụ ngwaọrụ ndị ọzọ na ọdụ ụgbọ mmiri ọkọlọtọ, nke a na-akpọ "uart1:".
Maka ọwa nkwurịta okwu serial ("uart1:"), enwere ike ịtọ ntọala ndị a. Jide n'aka na ha dabara na nhazi nke ngwaọrụ ejikọrọ ma ọ bụ ọzọ. Ọ bụrụ na nhazi nke ngwa nbipute na nhazi nke onye ọbịa ahụ adabaghị, nzaghachi sitere na ngwa nbipute maka nnabata ga-abụ akwa.
Ọnụego Baud
Ọnụego baud bụ ọsọ nnyefe na ibe n'iku kwa nkeji. Enwere nhọrọ 10:
300
600
1200
2400
4800
9600 (nke ndabara)
19200
38400
57600
115200
Ogologo agwa
Ogologo agwa na-akọwapụta ọnụọgụ nke ibe n'ibe ga-akọwapụta agwa. A na-akwado ibe asatọ, ebe nhọrọ ahụ na-enye ohere karịa mkpụrụedemede na mkpụrụedemede ndị a na-eji naanị n'asụsụ mba ọzọ. Rụtụ aka na akwụkwọ ntuziaka Intermec Fingerprint Programmer's Reference (P/N 937-005-xxx) maka ozi ndị ọzọ. Enwere nhọrọ abụọ:
· 7 (Akara agwa ASCII 000 ruo 127 decimal)
· 8 (Akara ngosi ASCII 000 ruo 255 decimal) (nke ndabara)

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Mmakọ
Parity na-ekpebi ka firmware ga-elele maka njehie nnyefe. Enwere nhọrọ ise:
Ọ dịghị (nke ndabara)
· Ọbụna
· Ihe dị iche
· Mark
· Oghere
Kwụsị Bits
Ọnụọgụ nkwụsịtụ na-akọwapụta ole ibe n'ibe ga-akọwa njedebe nke agwa. Enwere nhọrọ abụọ:
1 (nke ndabara)
· 2
Njikwa usoro
RTS/CTS bụ ụkpụrụ nke a na-achịkwa nzikọrịta ozi site na mmiri iyi site na ahịrị dị iche iche na eriri edobere ma ọ bụ Elu ma ọ bụ ala. Site na ndabara, agbanyụrụ nhọrọ a.
Ejikọtara CTS na ngwa nbipute na RTS na PC yana ọzọ. CTS HIGH sitere na ngwa nbipute na-egosi na ngalaba ahụ dị njikere ịnata data.
CTS LOW sitere na ngwa nbipute gosiri na ihe nchekwa nnata juru (lee XON/XOFF). N'ụfọdụ mmemme kọmputa, maka exampna Microsoft Windows HyperTerminal, RTS/CTS ka ahapụtara "Hardware."
XON/XOFF bụ protocol nke a na-achịkwa nzikọrịta ozi site na akara akara XON (ASCII 17 dec.) na XOFF (ASCII 19 dec.) na-ebufe n'otu ahịrị dị ka data ahụ. Enwere ike ịgbanye / gbanyụọ XON / XOFF iche maka data natara n'aka onye ọbịa site na ngwa nbipute (onye nbipute na-eziga XON/XOFF) yana maka data ezigara onye ọbịa site na ngwa nbipute (onye ọbịa na-eziga XON/ XOFF).
Ahịrị ọhụrụ
Na-ahọpụta agwa ma ọ bụ mkpụrụedemede ebufere site na ngwa nbipute iji gosi ahịrị ọhụrụ. Enwere nhọrọ atọ:
· CR/LFASCII 13 + 10 dec. (ndabere)

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
LFASCII 10 dec.
CRASCII 13 dec.
Nata ihe nchekwa
Ihe nchekwa nnata na-echekwa data ntinye tupu nhazi ya. Nha bụ 8192 bytes na enweghị ike ịgbanwe.
Nyefee ihe nchekwa
Ihe nchekwa nnyefe na-echekwa data ntinye tupu nhazi ya. Ogo ndabara bụ 8192 bytes na uru a enweghị ike ịgbanwe.
Com Mbido
The parameters n'okpuru Com node control interface na mpụga ahụigodo ojiji.
Interface
Ọ bụrụ na ị nwere nhọrọ Parallel IEEE 1284 interface arụnyere na ngwa nbipute, enweghị ike iji ya n'otu oge yana interface ngwaọrụ USB. Na menu a, ị nwere ike họrọ nke interface na-arụ ọrụ.
Ahụigodo USB
Ị nwere ike ịhọrọ n'etiti ọtụtụ nhazi ahụigodo dị iche iche, nke enwere ike itinye na ahụigodo USB mpụga ejikọrọ na ngwa nbipute site na interface USB host interface.
Ntọala emulation
Ọ ga-ekwe omume iji ngwa nbipute PD42 dị ka ngwa nbipute E4 site na nṅomi ngwanrọ.
Ụdị
Gbanwee n'etiti nhọrọ ndị a:
· Agbanyụrụ (nke ndabara)
· E4
Na ọnọdụ E4, iwu ndị a dị:
AKWỤKWỌ FONTDSLANT FONTDSLANT FONTDSIZE FONTD FONTSLANT FONTSIZE

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Rụtụ aka na akwụkwọ ntuziaka EasyCoder E4 Direct Protocol Programmer's Reference (P/N 1-960419-xx) maka ozi ndị ọzọ gbasara iwu, syntax, wdg.
Gbanwee
Onye ọrụ nwere ike gbanwee ntọala ntọala na Kwụsị, nke na-arụ ọrụ yiri Malite Adjust na Stop Adjust dị ka akọwara n'okpuru "Nhazi nhazi nri" na ibe 90. Ngalaba ahụ dị iche; Kama inye ya na ntụpọ, a na-akọwa ụkpụrụ ntọala na nkwụsị dị ka anya na millimita mụbara site na 10:
Isi (mmX10)
Uru ndabara bụ +88, nke ha nhata anya nke 8.8 mm ma ọ bụ ihe dịka 0.35 inch.
Nkwụsị (mmX10)
Uru ndabara bụ +55, nke ha nhata anya nke 5.5 mm ma ọ bụ ihe dịka 0.22 inch.
Nhazi nhazi nri
Nri na-edozi akụkụ nke ọnọdụ ntọala na-achịkwa ole n'ime mgbasa ozi a na-enye nri ma ọ bụ weghachi azụ n'ihu na/ma ọ bụ ka e bipụtachara ya n'ezie. Ntọala ndị a zuru ụwa ọnụ ma a ga-eme ya n'agbanyeghị mmemme a na-eme.
Rịba ama: Firmware na-eji ihu ihu nke akara nwere oghere, njedebe nke oghere nchọpụta, na akụkụ ihu nke akara ojii maka nchọpụta, ihe niile a na-ahụ n'ihe metụtara ntụziaka ndepụta.
Malite Gbanwee
Enyere uru Mmalite Adjust ka ọnụọgụ ntụpọ dị mma ma ọ bụ adịghị mma. Uru ndabara bụ 0, nke na-edobe mmalite ahụ n'ebe dị anya azụ site na ihu ihu nke nnomi:
· Ndozi mmalite dị mma pụtara na a ga-enye nri ogologo oge nke mgbasa ozi tupu mbipụta amalite. Ya mere, a na-emegharị mmalite ahụ site na nsọtụ ihu nke oyiri ahụ.
· Ndozi mmalite na-adịghị mma pụtara na a ga-eweghachite ogologo oge mgbasa ozi akọwapụtara tupu mbipụta amalite. Ya mere, a na-ebugharị mmalite ahụ n'akụkụ ihu nke oyiri ahụ.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

Ntọala mgbasa ozi
Nha mgbasa ozi

Kwụsị Gbanwee
A na-enye uru Kwụsị Agbanwe dị ka ọnụọgụ ntụpọ dị mma ma ọ bụ adịghị mma. Uru ndabara bụ 0, nke na-akwụsị nri mgbasa ozi n'ọnọdụ kwesịrị ekwesị maka ịdọpụ ọrụ:
· Ndozi nkwụsị nke ọma pụtara na nri mgbasa ozi nkịtị mgbe emechara mbipụta ga-abawanye site na uru akọwapụtara.
· Ndozi nkwụsị na-adịghị mma pụtara na nri mgbasa ozi nkịtị mgbe ebichara mbipụta ga-ebelata site na uru akọwapụtara.
Usoro mgbasa ozi na-agwa firmware njirimara nke mgbasa ozi nke a ga-eji, nke mere na a ga-edobe mbipụta ahụ nke ọma wee nweta ogo kachasị elu.
A na-akọwa nha nke ebe a na-ebipụta akwụkwọ site na paramita atọ; XMalite, obosara, na Ogologo.
X-Malite
Na-akọwapụta ọnọdụ mmalite n'akụkụ ntụpọ dị na isi mbipụta.
Uru mmalite X nke ndabara na-egbochi ibipụta na mpụga akara mgbe liner dị ntakịrị karịa akara aha. Ọ bụrụ na ịchọrọ ịbawanye obosara mbipụta, tọgharịa uru mmalite X na uru ndabara 0.
Site n'ịba ụba uru maka paramita mmalite X, a ga-ebugharị mmalite ahụ n'èzí, pụọ na nsọtụ ime nke ụzọ mgbasa ozi. N'ikwu ya n'ụzọ ọzọ, uru mmalite X ka ukwuu, oke dị n'ime na obosara mbipụta dị obere.
Obosara
Na-akọwapụta obosara mpaghara enwere ike ibipụta n'ọnụọgụ ntụpọ site na mmalite. Ya mere, nchikota nke X-mmalite na obosara ụkpụrụ na-enye oke mpụta nke ebe a na-ebipụta akwụkwọ. Ekwesịrị ịtọ obosara iji gbochie mbipụta n'èzí mgbasa ozi, nke nwere ike imerụ isi mbipụta.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ogologo
Na-akọwapụta ogologo mpaghara enwere ike ibipụta n'ọnụọgụ ntụpọ sitere na mmalite ya na nhazi Y-ma na-ekenye oghere ebe nchekwa maka nchekwa ihe oyiyi abụọ yiri ya na ebe nchekwa nwa oge nke ngwa nbipute.
Enwere ike gbakọọ nha nke ihe nchekwa ọ bụla site na iji usoro a:
Nha nchekwa (bits) = [ogologo bipụta na ntụpọ] x [obosara ebipụta na ntụpọ] · Ntọlite ogologo na-ekpebikwa ọnụọgụ mgbasa ozi mgbe ị na-eji "dozi ogologo warara."
· Nhazi ogologo na-emepụta nkwụsị mberede, nke na-arụ ọrụ mgbe edobere ngwa nbipute maka "Label (w gaps)", "Tiketi (w mark)", ma ọ bụ "Tiketi (w gaps)." Ọ bụrụ na ihe nkwụsị akara akara ahụ achọpụtaghị oghere ma ọ bụ akara n'ime 150% nke ogologo ogologo a na-etinye, a na-akwụsị nri mgbasa ozi na-akpaghị aka iji zere inye nri mgbasa ozi dum, n'ihi arụrụ ọrụ nke mmetụta.
Site na ịtọlite mmalite X, Obosara na Ogologo, ị ga-emepụta windo mbipụta n'ime nke enwere ike ịrụ ọrụ obibi. Ihe ọ bụla ma ọ bụ ubi ọ bụla na-agbatị na mpụga windo mbipụta n'akụkụ ọ bụla ga-ebiri ma ọ bụ kpatara ọnọdụ njehie (Error 1003 "Field of label"), lee akwụkwọ ntuziaka Intermec Fingerprint Programmer's Reference Manual (P/N 937-005-xxx).

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

max. 104.0 mm (4.095 inch)

14 mm (0.55 anụ ọhịa)

Ogologo

mpio bipụta

Ntụpọ akara na printhead

Mmalite X-mmalite

Ntụpọ #0

Obosara (1-832 ntụpọ)
Ntuziaka nri

Ntụpọ #831

25-118 mm (1-4.65 inch)
Ohere bipụta: 8 ntụpọ/mm isi mbipụta akwụkwọ
Ụdị mgbasa ozi
Paramita Ụdị Mgbasa ozi na-ejikwa ka akara nkwụsị ihe mmetụta (LSS) na usoro mgbasa ozi si arụ ọrụ. Enwere nhọrọ ụdị mgbasa ozi ise, hụkwa Ogbakwunye B, "Nkọwa mgbasa ozi":
A na-eji akara (w gaps) maka akara nrapado etinyere na liner.
A na-eji tiketi (w mark) maka akara, tiketi, ma ọ bụ ngwaahịa na-aga n'ihu nyere akara ojii n'azụ.
· A na-eji tiketi (w gaps) maka tiketi na tags na slits nchọpụta.
· Idozi ogologo warara na-eji na-aga n'ihu ngwaahịa ebe ogologo nke ebipụta window na-ekpebi ogologo nke mgbasa ozi na-eri nri si.
· Var ogologo warara na-eji na-aga n'ihu ngwaahịa. Ogo onyonyo ebipụta na-ekpebi ogologo nke nnomi ọ bụla.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

Ụdị akwụkwọ

Ọ dị mkpa ịhọrọ ụdị mgbasa ozi ziri ezi, yabụ na ngwa nbipute nwere ike izipu njehie ndị a:
Njehie 1005 "Enweghị akwụkwọ" na-egosi na enweghị ike ibipụta mbipụta ikpeazụ nyere iwu n'ihi ngwaahịa mgbasa ozi efu.
Njehie 1031 “Achọtaghị akara ọzọ” na-egosi na ebipụtara akara ma ọ bụ tiketi ikpeazụ enyere iwu nke ọma, mana enweghị ike ibipụta akara/tiketi ọzọ n'ihi ngwaahịa mgbasa ozi efu.
Mpempe akwụkwọ Ụdị akwụkwọ na-achịkwa okpomọkụ na-esi na isi mbipụta gaa na mgbasa ozi thermal ozugbo ma ọ bụ, nhọrọ, rịbọn mbufe iji mepụta ntụpọ ndị mejupụtara onyinyo mbipụta ahụ.
Akara, tiketi, tags, warara, na rịbọn maka ụdị ngwa dị iche iche dị site na Intermec. Iji nweta ogo mbipụta kacha mma yana ịgbatị ndụ nke isi mbipụta, jiri ngwa Intermec.
Dịka iwu n'ozuzu, ike dị elu na / ma ọ bụ nnukwu ebipụta ọsọ ga-ebelata ndụ nke printhead. Ejila ntọala ụdị akwụkwọ ezighi ezi ma ọ bụ ntọala ọsọ ebipụta dị elu karịa ka ọ dị mkpa maka ịnweta ogo mbipụta anabatara yana ọsọ ntinye.
Ọ bụrụ na ọnọdụ okpomọkụ dị ala karịa +15°C (+59°F), belata ọsọ ebipụta site na 50 mm/skịta.
Malite site na ịhọrọ n'etiti ụzọ abụọ ọzọ:
· Direct Thermal obibi (nhọrọ)
· Mbipụta mbufe ọkụ (nke ndabara)

Mara: A na-atụ aro nke ukwuu iji PrintSet 4 iji tọọ paramita nhazi ụdị akwụkwọ. PrintSet 4 gụnyere Ọkachamara Ọdịmma Mbipụta nke na-eduzi gị n'usoro imelite ogo mbipụta.
Nhọrọ gị ga-ekpebi paramita ị ga-abanye na-esote:
Direct Thermal Printing
Label Constant (nso 50 ruo 115). Ndabere bụ 85.
Ihe akara akara (nso 10 ruo 50). Ndabere bụ 40.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

Tebụl na-esonụ na-enye ndụmọdụ mbụ maka ntọala dabara adaba.

Ntọala akwadoro ozugbo okpomọkụ

Akwụkwọ

Akara akara

ihe mmetụta uche mgbe niile

Dị ala

100

Ọkọlọtọ 90

Elu

Ultra High 70

Ọsọ mbipụta kacha (203 dpi
75 100 125 150

Ọsọ mbipụta kacha (300 dpi)
50 75 100 100

Jiri ntọala dị n'elu dị ka ntọala mbụ wee mezie Label Constant ma ọ dị mkpa.
Mbipụta mbufe ọkụ
· Ribbon Constant (ihe dị ka 50 ruo 115). Ndabere bụ 90.
· Ihe kpatara Ribbon (nke dị na 10 ruo 50). Ndabere bụ 25.
· Mbelata akara akara (nso -50 ruo 50). Ndabere bụ 0.
Tebụl ndị a na-enye ndụmọdụ mbụ maka ntọala dabara adaba.

Ntọala akwadoro mbufe ọkụ

Ribọn

Ribbon Constant

Wax

Ngwakọ

(Wax/Resin)

Resin

100

Ihe kpatara Ribbon 20 25
30

Mbipụta kacha mma

Ọsọ (Ọsọ 203) (300

dpi

dpi)

75 100-150

75 75-100

150

100

Ewepụla ihe na-anata na tebụl a, ebe ọ bụ na rịbọn nwere mmetụta kachasị maka ntọala okpomọkụ maka ntọala nnyefe ọkụ.
Jiri ntọala ndị a dị n'elu dị ka ụkpụrụ mbụ, ma mezie Ribbon Constant ma ọ dị mkpa.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ntughari
Jiri ihe dị iche iche mee obere mgbanwe nke oji nke mbipụta, maka exampka imeghari ngwa nbipute ka ọ dị iche na ịdị mma n'etiti batches dị iche iche nke otu mgbasa ozi. Nhọrọ ndị a bụ ụkpụrụ n'etiti -10% ruo 10% na usoro nke 2. Uru ndabara bụ 0%. A na-atọgharị ọdịiche ahụ na uru ndabara mgbe ọ bụla akọwapụtara ụdị akwụkwọ ọhụrụ, n'agbanyeghị usoro ejirila.
Nri ule
Testfeed bụ oke ọgụgụ naanị nke na-egosi paramita dị n'ime maka ihe mmetụta Kwụsị Label. A na-edobe ihe ndị a na-akpaghị aka mgbe ị na-eme ihe nlele ule. Ọ dị ezigbo mkpa ịgba ọsọ testfeed mgbe ị na-agbanwe site n'otu ụdị mgbasa ozi gaa na nke ọzọ.
Ụdị nlele ule
N'ọnọdụ ụfọdụ a na-adịghị ahụkebe, Testfeed nwere ike ọ gaghị enwe ike ịchọpụta oghere ma ọ bụ akara na mgbasa ozi. Ya mere, ọ ga-ekwe omume ịtọ ọnọdụ Testfeed ka ọ dị nwayọọ iji kwe ka Label Stop Sensor nwee ike ịmata ọdịiche/akara mgbasa ozi ngwa ngwa. Nhọrọ ndị a bụ Slow and Fast (ndabara).
LEN (Ọnọdụ nwayọ)
Mgbe atọrọ ụdị Testfeed ka ọ dị nwayọ, ngwa nbipute ga- sample ogologo mgbasa ozi gbakwunyere 10mm. Ị nwere ike ịgbanwe sample ogologo site n'ịkọwa ọnụ ọgụgụ nke ntụpọ na LEN(Slow Mode), kacha nta bụ ọnụ ọgụgụ nke ntụpọ kwekọrọ 10mm. A kọwapụtara ndabara (ogologo mgbasa ozi gbakwunyere 10 mm) site na uru 0.
Bipụta Defs Mbido
Clip ndabara
Ihe ndabara Clip na-ekpebi ma ekwesịrị ibipụta ederede, koodu mmanya, onyonyo, ahịrị na igbe igbe dị na mpụga windo mbipụta (lee ibe 93) ma ọ bụ na agaghị ebi ya.
· Gbanyụọ (nke ndabara). Ọ bụrụ na achọpụtara ihe ọ bụla na-agbatị na mpụga windo mbipụta, a ga-akwụsị ibipụta akwụkwọ wee nye njehie 1003 “Field of label”.
· ONYE. Nke a na-ewepụ Njehie 1003, yana enwere ike ibipụta ihe ụfọdụ.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)
Ihe nlele
A na-eji akara ule ahụ “Diamonds”, “Chess”, “Bar Codes #1” na “Bar Codes #2” iji lelee ịdịmma mbipụta wee kwado nrụzi nrụnye nke isi mbipụta, lee “Mgbanwe nke ngwa nbipute” na ibe 47. Mpempe akwụkwọ nnwale “Ntọala Ama” na “Amụma ngwaike” depụtara nhazi nke ngwa nbipute ugbu a yana ngwaọrụ eletrọnịkị arụnyere. A na-ebipụta akara ule "Network Ama" naanị ma ọ bụrụ na ngwa nbipute nwere bọọdụ interface EasyLAN nhọrọ. Ọ bụrụ na ozi ahụ adabaghị n'otu akara, a ga-ebipụta akara abụọ ma ọ bụ karịa.
Ọsọ Bipụta
A na-akọwapụta ọsọ mbipụta n'ime mm/sekọnd. Ụkpụrụ anabatara bụ 50-150 mm/s (2-6 ip) maka isi mbipụta 203dpi yana 50-100 mm/s (2-4 ips) maka isi mbipụta 300 dpi. Ihe ndabara bụ 100 mm/s (4 ips) na 75 mm/s (3 ip) maka isi mbipụta 203 na 300 dpi n'otu n'otu.
Nnwale LSS
Enwere ike ịnwale ọrụ dị na ihe mmetụta nkwụsị labelụ (LSS) na-akpaghị aka ma ọ bụ jiri aka kọwaa ya na "Adjusting the Label Gap Sensor" na ibe 53.
Ntọala netwọkụ
Biko rụtụ aka na ntuziaka onye ọrụ EasyLAN (P/N 1-960590-xx) maka ozi gbasara ntọala ntọala netwọkụ.

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye C — Ntọala ntọala (akara mkpịsị aka)

EasyCoder PD42 Ntuziaka onye nbipute

D Ntọala Ntọala (IPL)

Ihe mgbakwunye a na-edepụta usoro ntọala niile ị nwere ike hazie ka ọ dabara na gburugburu ebe ị na-arụ ọrụ. Ihe mgbakwunye a na-ekpuchi isiokwu ndị a: · Nkọwa ntọala · Nbipụta akara ule na iwu IPL · Ịgagharị na osisi ntọala · Serial Communication Setup · Com Setup · Test/Setup Setup · Media Setup · Nhazi Nhazi · Ntọala netwọkụ · Ịlaghachi na Ntọala ndabara nke ụlọ ọrụ

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye D - Ntọala ntọala (IPL)
Nkọwa nhazi
Mpempe ntọala nke ngwa nbipute na-achịkwa ka ngwa nbipute si arụ ọrụ. Enwere ike ịnweta ma gbanwee ntọala ntọala ahụ n'ụzọ dị iche iche, lee "Ntọala Nhazi Na-agbanwe" na ibe 31 maka ozi ndị ọzọ.
Mara: Ụzọ akwadoro isi ịtọ ntọala nhazi ngwa nbipute gị bụ iji mmemme PrintSet 4, nke etinyere na CD PrinterCompanion. PrintSet 4 nwere ike ikwurịta okwu na ngwa nbipute gị site na eriri serial ma ọ bụ njikọ netwọk.
Ebipụta akara ule na iwu IPL
Enwere ike ibipụta akara ule nke na-enye ozi zuru ezu gbasara ngwa nbipute, ngwaike na ntọala netwọkụ n'ụdị testmode ma ọ bụ ogologo testmode, kamakwa site na izipu iwu site na windo ọnụ. Maka example, iwu ndị a na-ebipụta akara nhazi ngwanrọ, wee weghachi ngwa nbipute ka ọ bụrụ ọnọdụ ibipụta:
T;s;R;
Biko rụtụ aka na akwụkwọ ntuziaka IPL Programmer's Reference (P/N 066396-xxx) maka ozi ndị ọzọ gbasara otu esi ebipụta akara ule.
Na-agagharị n'Osisi Ntọlite
Akụkụ a na-enye ihe nfeview nke alaka na ọnụ na osisi ntọala, dị ka a na-egosi ya na windo ngosi.
Mara: E gosipụtara osisi ntọlite ka ọ dị na IPL 10.2.0.
Igbe nwere ntụpọ na-egosi atụmatụ dị naanị na ngwa nbipute nwere akụrụngwa nhọrọ.
Igbe nwere okpokolo agba na-egosi ntọala ndabara.
Enwere ike gbanwee uru dị n'ime brackets ka ọ bụrụ uru ọ bụla onye ọrụ kwuru.

100

EasyCoder PD42 Ntuziaka onye nbipute

Ụdị nhazi: Ser-Com

Ihe mgbakwunye D - Ntọala ntọala (IPL)

Nhazi: SER-COM

SER-COM: BAUDRATE

SER-COM: DATA BITS

BAUDRATE:

DATA BITS:

96B0A0UDRATE;

8 Ogologo oge

19B2A0U0DRATE;

38B4A0U0DRATE;

57B5A0U0DRATE;

11B5A2U0D0RATE;

12B0A0UDRATE;

24B0A0UDRATE;

4800

Pịgharịa gaa n'ihu

Pịgharịa azụ

SER-COM: PARITY

SER-COM: Kwụsị BITS

SER-COM: PROTOCOL

NKWUKWU:

Kwụsị ibe:

AKWỤKWỌ:

1 Nkwụsịtụ:

EZINỤLỌ:

ODPDARITY: Oghere

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Pịgharịa gaa n'ihu

Pịgharịa azụ

PROTOCOL: XOENN_QX/OAFCFK:
XOENN/QX/OAFCFK+: ỌKWU OKWU
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụdị nhazi: Com

Nhazi: COM
COM: INTERFACE
INTERFACE: USBBAUDDERVAITCEE;
IEEE 1284

COM: eriri USB
Ahụigodo USB: KEYBOARD USUSB:
SWUESDBISKHEYBOARD: FRUESNBCHKEYBOARD: GERMAN
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

EasyCoder PD42 Ntuziaka onye nbipute

101

Ihe mgbakwunye D - Ntọala ntọala (IPL)
Ụdị nhazi: Nnwale/Ọrụ

Nhazi: Nnwale/ỌRỤ

Nnwale/ỌRỤ: TESTPRINT

Nnwale: CONFIG

Nnwale: akara ule

Nnwale: FORMAT

CONFIG: SCWONFIG: HCWONFIG:
NETWORK
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

EKWỤKWỌ Nnwale: PITTECSHT LABEEL: IKE ebipụta
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụdị: NIILE
NIILE: Ụdị ebipụta

Nnwale: UDC

Nnwale: FONT

UDC:

FONT:

NIILE

Ihe niile: Bipụta UDC

NIILE: Bipụta UDF

Nnwale: PAGE
PEEJI: NIILE
NIILE: IHE ebipụta

Nnwale/ỌRỤ: MKWUO DATA

Nnwale/ỌRỤ: Ntọgharị ebe nchekwa

Nnwale/Ọrụ: Nnwale LSS

DATA DUMP: NCOONFIG: EE
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Nhazigharị ebe nchekwa: ACLOLNFIG: Nhazi
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Nnwale LSS: LSS akpaaka
LSS akpaaka:

102

EasyCoder PD42 Ntuziaka onye nbipute

Ụdị nhazi: Mgbasa ozi

Ihe mgbakwunye D - Ntọala ntọala (IPL)

Nhazi: MEDIA

Mgbasa ozi: NDỊ mgbasa ozi

Mgbasa ozi: Ụdị akwụkwọ

Mgbasa ozi: ỤWA AKWỤKWỌ

Mgbasa ozi: LBL ogologo ntụpọ

Mgbasa ozi : ỌRỤ

Ụdị mgbasa ozi: GCAOPNFIG: MACROKNFIG:
Na-aga n'ihu
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụdị akwụkwọ: DCTONFIG: TTR
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụkpụrụ TESTFEED: FATSETSTFEED MODE:
Nwayọọ nwayọọ
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ntụpọ ogologo LBL: 1200
100/200/400/800/ 1200/1600/2000/ 2500/3000/3600/ 4200/4800
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

AMAOKWU: 420
120/130/140/160/170/ 180/222/226/236/238/ 366/369/420/440/450/ 460/470/480/513/527/ 533/563/565/567/623/ 627/633/647/673/677/ 687/720/854/864
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Mgbasa ozi: Ọchịchị
DARKNESS: 0 0/1/2/3/4/5/6/7/8/ 9/10/-10/-9/-8/-7/ -6/-5/-4/-3/-2/-1
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Mgbasa ozi: LBL izu ike

Mgbasa ozi: FỌM ADJ DOTS X

Mgbasa ozi: FORM ADJ DOTS Y

Ebe izu ike LBL: 0
0/2/4/6/8/10/15/20/25/ 30/-30/-25/-20/-15/-10/ -8/-6/-4/-2

Ụdị ADJ DOTS X: 0
0/2/4/6/8/10/15/20/25/ 30/-30/-25/-20/-15/-10/ -8/-6/-4/-2

Ụdị ADJ DOTS Y: 0
0/2/4/6/8/10/15/20/25/ 30/-30/-25/-20/-15/-10/ -8/-6/-4/-2

Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ụdị nhazi: Nhazi

Nhazi: Nhazi

Nhazi: PWRUP EMULATION

Nhazi: Ọsọ Mbipụta

Nhazi: CUTTER

PWRUP EMULATION: NCOONNEFIG: 86CXOXN-F1I0GM:IL
86XX-15MIL
Pịgharịa gaa n'ihu Pịgharịa gaa azụ

Ọsọ ebipụta:

CHUTTER:

2PIRNI/NSTECSPEED:

NCOOTNFIINGS: AKWỤKWỌ

3PIRNI/NSTECSPEED:

ENCAOBNLFEIG:

4PIRNI/NSTECPPED:

Gbanyụọ

5 PIRNI/NSTECPPED:

Pịgharịa gaa n'ihu

6 IN/SEC

Pịgharịa azụ

Pịgharịa gaa n'ihu

Pịgharịa azụ

Ụdị nhazi: netwọk (Nhọrọ)

Nhazi: NETWORK
Netwọk: Nhọrọ IP
Nhọrọ IP: DHPCAPR+IBTOYO:TP
MAAPNAURAILTY: DHPCAPRITY: BOOTP

A ga-egosipụta menus ndị a naanị mgbe arụnyere bọọdụ interface EasyLAN nhọrọ.

Netwọk: ADDRESS IP
adreesị IP: 0.0.0.0

netwọk: NETMASK
NETMASK: 0.0.0.0

Netwọk: ROUTER DEFAULT
ROUTER ezighi ezi: 0.0.0.0

Netwọk: NAMESERVER
ONYE NSỌ: 0.0.0.0

Netwọk: ADDRESS MAC
ADDRESS MAC: nnnnnnnnnnn

EasyCoder PD42 Ntuziaka onye nbipute

103

Ihe mgbakwunye D - Ntọala ntọala (IPL)
Ntọala nkwurịta okwu Oghere Usoro
Usoro nzikọrịta ozi serial na-achịkwa nkwukọrịta n'etiti ngwa nbipute na kọmputa ejikọrọ ma ọ bụ ngwaọrụ ndị ọzọ na ọdụ ụgbọ mmiri ọkọlọtọ.
Gbaa mbọ hụ na usoro nzikọrịta nke ngwa nbipute dabara na ntọlite ngwaọrụ ejikọrọ ma ọ bụ ọzọ. Ọ bụrụ na nhazi nke ngwa nbipute na nhazi nke onye ọbịa ahụ adabaghị, nzaghachi sitere na ngwa nbipute maka nnabata ga-abụ akwa.
Ọnụego Baud
Ọnụego baud bụ ọsọ nnyefe na ibe n'iku kwa nkeji. Enwere nhọrọ asatọ:
1200
2400
4800
9600 (nke ndabara)
19200
38400
57600
115200
Data Bits
Oke Data Bits na-akọwapụta ọnụọgụ nke ibe n'ibe ga-akọwapụta agwa. A na-atụ aro bits asatọ, ebe nhọrọ a na-enye ohere karịa mkpụrụedemede na mkpụrụedemede ndị a na-eji naanị n'asụsụ mba ọzọ. Rụtụ aka na akwụkwọ ntuziaka IPL Programmer's Reference (P/N 066396-xxx) maka ozi ndị ọzọ.
· 7 (Akara agwa ASCII 000 ruo 127 decimal)
· 8 (Akara ngosi ASCII 000 ruo 255 decimal) (nke ndabara)
Mmakọ
Parity na-ekpebi ka firmware ga-elele maka njehie nnyefe. Enwere nhọrọ ise:
Ọ dịghị (nke ndabara)
· Ọbụna
· Ihe dị iche

104

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye D - Ntọala ntọala (IPL)
· Oghere
Kwụsị Bits
Ọnụọgụ nkwụsịtụ na-akọwapụta ole ibe n'ibe ga-akọwa njedebe nke agwa. Enwere nhọrọ abụọ:
1 (nke ndabara)
· 2
Protocol
XON/XOFF (nke ndabara)
Na protocol XON/XOFF, a na-enweta njikwa data fl ow site na iji mkpụrụedemede XON (DC1) na XOFF (DC3). Achọghị ka ejiri mkpụrụ edemede Mmalite Ederede (STX) na Ọgwụgwụ Ederede (ETX) kechie ngọngọ ozi. Agbanyeghị, mgbe agbalitere ma ọ bụ ka nrụpụtachara mkpụrụedemede niile, ewezuga ENQ ma ọ bụ VT, a ga-eleghara ya anya ruo mgbe achọpụtara STX. Ogologo ozi dị na protocol a enweghị mgbochi. Ya bụ, ngwa nbipute na-ahazi ozi ka a na-ebudata ya wee kwụsị mgbe enweghị ozi ọzọ.
Usoro XON/XOFF kwekọrọ n'ụkpụrụ ụlọ ọrụ anabatara. Enweghị nzaghachi ngwụcha nke ezigara onye ọbịa na-abụghị XOFF. A ga-eziga XON n'elu ọkụ.
Ebe ọ bụ na a na-eji DC1 na DC3 maka njikwa ọsọ data, mkpụrụedemede ọnọdụ nbipute dị iche na nke Standard Protocol. Ọ bụrụ na onye ọbịa ahụ leghaara XOFF nke ngwa nbipute, onye nbipute ga-ezigara XOFF mgbe ọ natachara mkpụrụedemede iri na ise ọ bụla n'aka onye ọbịa.

Ọnọdụ
Mpempe akwụkwọ zuru ezu, isi mmalite welitere mmejọ Ribbon Ọ nweghị ngwaahịa akara ngosi zuru ezu Labelụ na-ekpo ọkụ na-ekpo ọkụ na mpempe akwụkwọ mpempe akwụkwọ.

agwa
GS US US EM DC4 SI FS DC2 DC2

EasyCoder PD42 Ntuziaka onye nbipute

105

Ihe mgbakwunye D - Ntọala ntọala (IPL)

· XON/XOFF+ Ọnọdụ
Intermec Standard Protocol
Intermec Printer Standard Protocol bụ protocol ọkara duplex. Mbufe data niile na ngwa nbipute nwere ajụjụ ajụjụ ọnọdụ (ENQ), mkpofu ọnọdụ (VT), ma ọ bụ ngọngọ ozi. Mgbochi ozi ọ bụla na-amalite site na mkpụrụedemede Mmalite nke ederede (STX) wee mechie na njedebe nke mkpụrụedemede (ETX). Mgbochi ozi ọ bụla ga-abụrịrị mkpụrụedemede 255 ma ọ bụ obere, gụnyere mkpụrụedemede STX na ETX. Onye nbipute na-aza ajụjụ ọkwa ọ bụla ma ọ bụ ngọngọ ozi na ọkwa ngwa nbipute. Onye ọbịa kwesịrị ịlele ọkwa nbipute tupu nbudata ngọngọ ozi na ngwa nbipute. ENQ na-eme ka onye nbipute nyefee ọkwa kachasị mkpa ya, ebe VT na-agwa onye nbipute ka ọ bufee ọkwa niile na-emetụta n'usoro nke ụzọ ha si ebute ụzọ. Tebụl na-esote depụtara ọnọdụ nbipute enwere ike na ihe ndị na-agbadata bụ

Ọnọdụ
Mpempe akwụkwọ zuru ezu, isi nbipụta welitere mmejọ Ribbon Ọ nweghị ngwaahịa akara ngosi zuru ezu Labelụ na-ekpo ọkụ na-ekpo ọkụ na mpempe akwụkwọ na-awụpụ Label skipping Njikere Mbipụta

agwa
GS US US EM DC3 SI FS DC1 DC1 DC1

Com Mbido

The parameters n'okpuru Com node control interface na mpụga ahụigodo ojiji.
Interface
Ọ bụrụ na ị nwere nhọrọ Parallel IEEE 1284 interface arụnyere na ngwa nbipute, enweghị ike iji ya n'otu oge yana interface ngwaọrụ USB. Na menu a, ị nwere ike họrọ nke interface na-arụ ọrụ.

106

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye D - Ntọala ntọala (IPL)
Ahụigodo USB
Ị nwere ike ịhọrọ n'etiti ọtụtụ nhazi ahụigodo dị iche iche, nke enwere ike itinye na ahụigodo USB mpụga ejikọrọ na ngwa nbipute site na interface USB Host.
Nhazi ule/ọrụ
Ihe nlele
Akụkụ a nke Ụdị Ntọala na-enye gị ohere ibipụta ụdị akara ule dị iche iche.
Nhazi
Họrọ n'etiti sọftụwia (SW), ngwaike (HW), na akara ule netwọkụ (Network dị naanị ma ọ bụrụ na ngwa nbipute nwere kaadị netwọọdụ EasyLAN). Labelụ nhazi ngwanrọ nwere ozi a: · Usoro nhazi ugbu a echekwara na ngwa nbipute
ebe nchekwa · Peeji akọwara · Ụdị akọwara · Eserese akọwapụtara · mkpụrụedemede akọwapụtara · Nhọrọ ngwa nbipute ọ bụla arụnyere Labelụ nhazi ngwaike nwere ozi a: · Ozi ebe nchekwa ngwa nbipute · Mileage ngwa nbipute · Ntọala nbipụta · firmware checksum, mmemme na nọmba ụdị Akara nhazi netwọkụ nwere. ozi a: · WINS Aha · Adreesị MAC · Nhọrọ IP · Adreesị IP · Netmask

EasyCoder PD42 Ntuziaka onye nbipute

107

Ihe mgbakwunye D - Ntọala ntọala (IPL)
· Ihe nkenke rawụta
· Aha nkesa
Ihe nkesa ozi
· Ihe nkesa WINS nke mbụ
Ihe nkesa WINS nke abụọ
· Nchịkọta netwọkụ
Akara ule
Họrọ n'etiti Pitch na Ogo Bipụta:
Labelụ Pitch nwere ọbụna ụkpụrụ nke obere ntụpọ na-ekpughe ntụpọ printhead na-ada ada na ọdịiche nke ọchịchịrị mbipụta n'ihi nrụgide printhead na-enweghị isi ma ọ bụ nkesa ike adịghị mma na isi akwụkwọ.
Labelụ Ogo Bipụta nwere ọnụọgụ koodu mmanya nwere njirimara dị iche iche yana ozi bara uru na ụdị ngwa nbipute, ụdị mmemme, ọsọ ebipụta na ntọlite uche mgbasa ozi.
Usoro
Ụdị akara ngosi nwere otu usoro ị nwere ike iji nyochaa ogo mbipụta nke otu usoro. Nhọrọ a na-ebipụta akara maka ụdịdị niile echekwara na ebe nchekwa ngwa nbipute.
Ibe
The Page Label na-anwale ike nke ngwa nbipute ịnata na ibipụta otu ibe ma ọ bụ ọtụtụ ibe nke data akara ezitere n'aka onye ọbịa. Nhọrọ a na-ebipụta akara maka ibe niile echekwara na ebe nchekwa ngwa nbipute.
UDC
UDC Label na-anwale ikike nke ngwa nbipute ịnata na ibipụta otu mkpụrụedemede akọwapụtara nke otu ma ọ bụ ọtụtụ (ihe osise bitmap) nke ezitere site na onye ọbịa. Nhọrọ a na-ebipụta akara maka UDC niile echekwara na ebe nchekwa ngwa nbipute.
Font
Akara mkpụrụedemede nwere mkpụrụedemede niile n'otu mkpụrụedemede. Nhọrọ a na-ebipụta akara maka mkpụrụedemede akọwapụtara onye ọrụ (UDF) echekwara na ebe nchekwa ngwa nbipute.

108

EasyCoder PD42 Ntuziaka onye nbipute

Ihe mgbakwunye D - Ntọala ntọala (IPL)

Tọgharia ebe nchekwa data
Nnwale LSS
Ntọala mgbasa ozi

Ọ bụrụ na agbanyere ntufu data site na ịhọrọ nhọrọ "Ee", onye nbipute na-ege ntị na ọdụ ụgbọ mmiri niile wee bipụta data niile na mkpụrụedemede protocol natara. A na-ebipụta ihe nnọchianya ASCII na hexadecimal nke agwa ọ bụla.
Njirimara a na-enye gị ohere ịtọgharịa ntọala ntọala ụlọ ọrụ nke ngwa nbipute. Enwere nhọrọ abụọ: · Ha niile. Họrọ nhọrọ a ka ịtọgharịa ebe nchekwa niile. · Nhazi. Họrọ nhọrọ a ka ịtọgharịa nhazi ahụ
akụkụ nke ebe nchekwa naanị.
Ọrụ a na-enye gị ohere ịnwale na Label Gap Sensor (nke a na-akpọkwa Label Stop Sensor, ma ọ bụ LSS) na-arụ ọrụ nke ọma. Biko hụ "Ịgbanwee ihe mmetụta ọpụrụiche label" na ibe 53.
Usoro mgbasa ozi na-agwa firmware njirimara nke mgbasa ozi nke a ga-eji, ya mere a ga-edobe mbipụta ahụ nke ọma na ezigbo mma.
Ụdị mgbasa ozi
Ụdị ụdị mgbasa ozi na-ejikwa ka akara nkwụsị ihe mmetụta (LSS) na usoro mgbasa ozi si arụ ọrụ. Enwere nhọrọ ụdị mgbasa ozi atọ: · A na-eji oghere maka akara nrapado etinyere na liner (nkwado
akwụkwọ) ma ọ bụ ngwaahịa akwụkwọ na-aga n'ihu nwere oghere nchọpụta. Ọdabara. A na-eji akara maka akara, tiketi, ma ọ bụ warara nyere akara ojii n'azụ. A na-eji ihe na-aga n'ihu maka ngwaahịa na-aga n'ihu na-enweghị oghere nchọpụta ọ bụla ma ọ bụ akara ojii.

EasyCoder PD42 Ntuziaka onye nbipute

109

Ihe mgbakwunye D - Ntọala ntọala (IPL)
Ụdị akwụkwọ
Ụdị Ụdị akwụkwọ na-achịkwa ka usoro ntinye rịbọn na rịbọn sensọ si arụ ọrụ. Enwere nhọrọ ụdị akwụkwọ abụọ:
A na-eji DT (Direct Thermal) maka mgbasa ozi na-ekpo ọkụ na-enweghị mkpa ọ bụla maka rịbọn nnyefe okpomọkụ. Ọdabara.
A na-eji TTR (Nfefe Thermal) maka ihe ndị na-enweta ihu na-adịghị ekpo ọkụ na-ejikọta ya na rịbọn nnyefe okpomọkụ.
Ụdị nlele ule
N'ọnọdụ ụfọdụ a na-adịghị ahụkebe, Testfeed nwere ike ọ gaghị enwe ike ịchọpụta oghere ma ọ bụ akara na mgbasa ozi. Ya mere, ọ ga-ekwe omume ịtọ ọnọdụ Testfeed ka ọ dị nwayọọ iji kwe ka Label Stop Sensor nwee ike ịmata ọdịiche/akara mgbasa ozi ngwa ngwa. Nhọrọ ndị a bụ Slow and Fast (ndabara).
Ntụpọ ogologo akara
Ntọlite Ogologo Labelụ na-akọwapụta ogologo n'ime ntụpọ nke ọ bụla n'akụkụ ntụzịaka ndepụta mgbasa ozi (X-coordinate). A na-eji nke a maka nchọpụta "label-out".
Mmetụta (nọmba Mgbasa ozi)
Oke ntọlite a na-akọwapụta njirimara nke mgbasa ozi ọkụ ozugbo ma ọ bụ nchikota nke ịnata ihe ihu na rịbọn nyefe ọkụ, yabụ ngwa ngwa ngwa ngwa nke ngwa nbipute nwere ike bulie ikpo ọkụ nke isi mbipụta yana ọsọ mbipụta. A na-eji akara ngosi mgbasa ozi nwere ọnụọgụ atọ nke ejiri iji kọwaa ọkwa mgbasa ozi sitere na Intermec. Chọọ nọmba mmetụta mgbasa ozi na:
· akụkụ nke mpịakọta mgbasa ozi. Jiri ọnụọgụ atọ ikpeazụ nke ọnụọgụ iri na ise

Akwụkwọ / akụrụngwa

Intermec PD42 Easy Coder Printer [pdf] Ntuziaka onye ọrụ
Mpempe akwụkwọ koodu dị mfe PD42, PD42, ngwa nbipute koodu dị mfe, ngwa nbipute coder, ngwa nbipute

Ntụaka

Akwụkwọ ntuziaka onye ọrụ

PD42 Easy Coder Printer

Ozi ngwaahịa

Nkọwapụta

Ntuziaka ojiji ngwaahịa

1. Iji ngwa nbipute

2. Ịwụnye ngwa nbipute

Jikọọ ngwa nbipute na sistemụ gị

Ijikọ ngwa nbipute site na eriri USB

Ijikọ ngwa nbipute Site na Port Serial

Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Parallel

Ijikọ ngwa nbipute na netwọkụ

N'idebata Media

Na-eburu mgbasa ozi maka ịrụ ọrụ anya mmiri ( kwụ ọtọ-site).

Na-ebu ihe mgbasa ozi maka ịrụ ọrụ npụpụ (nkwụsị onwe).

Na-ebunye Ribbon Nfefe Thermal

Ịtinye ngwa nbipute

Mpempe akwụkwọ nyocha

Ịmepụta na ibipụta akara

3. Ịhazi ngwa nbipute

FAQ

Ajụjụ: Enwere m ike iji ngwa nbipute EasyCoder PD42 na ma thermal
nyefee na eduzi thermal media?

Q: Gịnị bụ kacha ebipụta ọsọ nke EasyCoder PD42
Onye nbipute?

Ajụjụ: Kedu ka m ga-esi hichaa isi mbipụta nke EasyCoder PD42
Onye nbipute?

Akwụkwọ / akụrụngwa

Ntụaka

Hapụ ikwu

Kagbuo nzaghachi

PD42 Easy Coder Printer

Ozi ngwaahịa

Nkọwapụta

Ntuziaka ojiji ngwaahịa

1. Iji ngwa nbipute

2. Ịwụnye ngwa nbipute

Jikọọ ngwa nbipute na sistemụ gị

Ijikọ ngwa nbipute site na eriri USB

Ijikọ ngwa nbipute Site na Port Serial

Ijikọ ngwa nbipute Site na ọdụ ụgbọ mmiri Parallel

Ijikọ ngwa nbipute na netwọkụ

N'idebata Media

Na-eburu mgbasa ozi maka ịrụ ọrụ anya mmiri ( kwụ ọtọ-site).

Na-ebu ihe mgbasa ozi maka ịrụ ọrụ npụpụ (nkwụsị onwe).

Na-ebunye Ribbon Nfefe Thermal

Ịtinye ngwa nbipute

Mpempe akwụkwọ nyocha

Ịmepụta na ibipụta akara

3. Ịhazi ngwa nbipute

FAQ

Ajụjụ: Enwere m ike iji ngwa nbipute EasyCoder PD42 na ma thermal nyefee na eduzi thermal media?

Q: Gịnị bụ kacha ebipụta ọsọ nke EasyCoder PD42 Onye nbipute?

Ajụjụ: Kedu ka m ga-esi hichaa isi mbipụta nke EasyCoder PD42 Onye nbipute?

Akwụkwọ / akụrụngwa

Ntụaka

Ozi ndị metụtara

Hapụ ikwu

Kagbuo nzaghachi

Ajụjụ: Enwere m ike iji ngwa nbipute EasyCoder PD42 na ma thermal
nyefee na eduzi thermal media?

Q: Gịnị bụ kacha ebipụta ọsọ nke EasyCoder PD42
Onye nbipute?

Ajụjụ: Kedu ka m ga-esi hichaa isi mbipụta nke EasyCoder PD42
Onye nbipute?