audio-technica ES964 Boundary Microphone Array Akwụkwọ ntuziaka onye ọrụ

Akpachara anya maka nchekwa
N'agbanyeghi na emebere ngwaahịa a ka ejiri ya mee ihe n'enweghị nsogbu, ịghara iji ya nke ọma nwere ike bute ihe mberede. Iji hụ na nchekwa, debe ịdọ aka ná ntị na ịkpachara anya mgbe ị na-eji ngwaahịa a.

Ịdọ aka ná ntị maka ngwaahịa

Edoghachila ngwaahịa ahụ ka ọ nwee mmetụta siri ike ka ịzenarị arụghị ọrụ.

Achịkọtala, gbanwee ma ọ bụ nwaa ịrụkwa ngwaahịa a.
Ejila aka mmiri jide ngwaahịa ahụ ka ịzenarị ujo eletrik ma ọ bụ mmerụ ahụ.

Echekwala ngwaahịa a n'okpuru ìhè anyanwụ kpọmkwem, nso ngwaọrụ kpo oku ma ọ bụ n'ebe dị ọkụ, iru mmiri ma ọ bụ uzuzu uzuzu.
Edokwala ngwaahịa a n'elu ala anaghị akwụsi ike ka ịzenarị mmerụ ahụ ma ọ bụ adịghị arụ ọrụ n'ihi ọdịda ma ọ bụ ihe ndị yiri ya.

Ihe ndetu na ojiji

Ihe ngwugwu

Igwe okwu
Igwe igwe okwu

RJ45 Breakout Cables (A na B)

Aha akụkụ na Ọrụ

N'elu

Mgbanwe okwu: Na-agbanwe n'etiti ogbi na mkpọpu.

Igwe igwe okwu: Isi ahụ nke igwe okwu.

Akụkụ

Ihe ngosi okwu Lamp: Na-egosi ọkwa ogbi/wepu site na agba nke egosi lamp na-enwu.

N'okpuru

SW. Ọrụ: Na-ahazi ka mgba ọkụ okwu si arụ ọrụ.
Njikwa: Na-ahazi ma ọ̀ gwụla ma ọ̀ kpọchiri igwe okwu yana ma akara okwu lamp na-enwu site na iji ngwaahịa ma ọ bụ ngwaọrụ njikwa mpụga.

Agba LED: Ị nwere ike họrọ agba nke akara okwu lamp ọkụ mgbe emechiri emechi/emechighị.

Ntuziaka ojiji ngwaahịa

Usoro ọrụ
Oge ọ bụla ị metụrụ mgba ọkụ okwu aka, a na-agbanye ma ọ bụ gbanyụọ igwe okwu.

A na-agbanye igwe okwu ma ọ bụrụhaala na ị na-emetụ mgba ọkụ okwu.
A na-agbanyụ igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.

Ụdị ọrụ

SW. Ọrụ

Metụ: A na-agbanyụ igwe okwu ma ọ bụrụhaala na ị na-emetụ ngbanwe okwu. A na-agbanye igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.
Gbanyụọ/gbanyụọ mama.: Oge ọ bụla ị metụrụ mgba ọkụ okwu aka, a na-agbanye ma ọ bụ gbanyụọ igwe okwu.

njikwa

MGBE: A na-emenyụ/gbanyụọ igwe okwu site na ngbanwe okwu na ngwaahịa ahụ. Ihe ngosi okwu lamp na-enwukwa ọkụ na njikọ mgbanwe okwu.
Wepu: Igwe okwu na-anọ mgbe niile. Ihe ngosi okwu lamp ọkụ na njikọta na ọrụ nke ntụgharị okwu na ozi ọrụ na-ebufe na ngwaọrụ njikwa mpụga site na njedebe CLOSURE. Ngwa njikwa mpụga na-ejikwa ogbi/mkpọpu.
Igwe ọkụ ọkụ: Igwe okwu na-anọ mgbe niile, na ngwaọrụ njikwa mpụga na-ejikwa mpịachi/mkpọpu ma na-enwu akara ngosi okwu lamp. A na-ebufe ozi ngbanwe okwu na ngwaọrụ njikwa mpụga site na ọdụ Mkpuchi.

Usoro njikọ

Nzọụkwụ 1:
Jikọọ ọnụ ọnụ mmepụta (RJ45 jacks) na eriri igwe na eriri RJ45 breakout gụnyere site na iji eriri STP dị na azụmaahịa. Jikọọ ọnụ mmepụta igwe okwu A na B ruo RJ45 eriri breakout A na B, n'otu n'otu.

Nzọụkwụ 2:
Jikọọ ọnụ ọnụ mmepụta na eriri RJ45 breakout na ngwaọrụ nwere ntinye igwe okwu (ntinye ziri ezi) nke dabara na ọkụ ọkụ phantom.

Ajụjụ (Ajụjụ a na-ajụkarị)

Ajụjụ: Enwere m ike ịkwasa ma ọ bụ gbanwee ngwaahịa a?
A: Mba, ịkwasa ma ọ bụ gbanwee ngwaahịa a nwere ike bute mperi ma anaghị akwado ya.
Ajụjụ: Kedu ka m ga-esi họrọ agba nke ihe ngosi okwu lamp?
A: Ị nwere ike họrọ agba nke okwu egosi lamp iji ntọala COLOR LED dị na ala igwe okwu.

Akpachara anya maka nchekwa

N'agbanyeghi na emebere ngwaahịa a ka ejiri ya mee ihe n'enweghị nsogbu, ịghara iji ya nke ọma nwere ike bute ihe mberede. Iji hụ na nchekwa, debe ịdọ aka ná ntị na ịkpachara anya mgbe ị na-eji ngwaahịa a.

Ịdọ aka ná ntị maka ngwaahịa

Edoghachila ngwaahịa ahụ ka ọ nwee mmetụta siri ike ka ịzenarị arụghị ọrụ.
Achịkọtala, gbanwee ma ọ bụ nwaa ịrụkwa ngwaahịa a.
Ejila aka mmiri jide ngwaahịa ahụ ka ịzenarị ujo eletrik ma ọ bụ mmerụ ahụ.

Echekwala ngwaahịa a n'okpuru ìhè anyanwụ kpọmkwem, nso ngwaọrụ kpo oku ma ọ bụ n'ebe dị ọkụ, iru mmiri ma ọ bụ uzuzu uzuzu.
Edokwala ngwaahịa a n'elu ala anaghị akwụsi ike ka ịzenarị mmerụ ahụ ma ọ bụ adịghị arụ ọrụ n'ihi ọdịda ma ọ bụ ihe ndị yiri ya.

Ihe ndetu eji

Emela igwe okwu site na ijide eriri ma ọ bụ dọta eriri n'ike. Ime otú ahụ nwere ike ịkpata nkwụsị ma ọ bụ mebie.
Awụnyela n'akụkụ ikuku ntụ oyi ma ọ bụ ihe ọkụ ọkụ, n'ihi na ime nke a nwere ike ịkpata nsogbu.
Ekwela ka eriri USB kọọ n'oche ahụ ma ọ bụ hapụ eriri ahụ ka ọ bụrụ tuo ya.

Wụnye igwe okwu n'elu ala dị larịị, nke na-enweghị mgbochi. Gbaa mbọ hụ na ụda ụda adịghị n'okpuru ebe mgbago.
Ịtụkwasị ihe ọ bụla n'elu elu (dị ka tebụl ogbako) tupu a gwọọ ya nke ọma nwere ike ime ka njedebe ya mebie.

Ihe ngwugwu

Igwe okwu
RJ45 breakout cable × 2
Rubber isolator

Idozi nut
Ihe nkwụnye nkwụnye okpokoro
Tebụlụ nkwụnye nkwụnye mgbakwasa skru × 3

Aha akụkụ na ọrụ

N'elu

Mgbanwe okwu
Na-agbanwe n'etiti ogbi na mkpọpu.

Ahụ igwe okwu

Akụkụ

Ihe ngosi okwu lamp
Na-egosi ọkwa ogbi/wepu site na agba nke egosi lamp na-enwu.

N'okpuru

SW. Ọrụ
Na-ahazi ka mgba ọkụ okwu si arụ ọrụ.

Ụdị	Usoro ọrụ
GỤỌ / Gbanyụọ	Oge ọ bụla ị metụrụ mgba ọkụ okwu aka, a na-agbanye ma ọ bụ gbanyụọ igwe okwu.
Nne. GBANYE	A na-agbanye igwe okwu ma ọ bụrụhaala na ị na-emetụ mgba ọkụ okwu. A na-agbanyụ igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.
Nne. Gbanyụọ	A na-agbanyụ igwe okwu ma ọ bụrụhaala na ị na-emetụ ngbanwe okwu. A na-agbanye igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.

njikwa
Na-ahazi ma ọ̀ gwụla ma ọ̀ kpọchiri igwe okwu yana ma akara okwu lamp na-enwu site na iji ngwaahịa ma ọ bụ ngwaọrụ njikwa mpụga.

Ụdị	Ọrụ
Mpaghara	A na-emenyụ/gbanyụọ igwe okwu site na ngbanwe okwu na ngwaahịa ahụ. Ihe ngosi okwu lamp na-enwukwa ọkụ na njikọ mgbanwe okwu.
REMOTE	Igwe okwu na-anọ mgbe niile. Ihe ngosi okwu lamp ọkụ na njikọta na ọrụ nke ntụgharị okwu na ozi ọrụ na-ebufe na ngwaọrụ njikwa mpụga site na njedebe CLOSURE. Ngwa njikwa mpụga na-ejikwa ogbi/mkpọpu.
LED REMOTE	Igwe okwu na-anọ mgbe niile, na ngwaọrụ njikwa mpụga na-ejikwa mpịachi/mkpọpu ma na-enwu akara ngosi okwu lamp. A na-ebufe ozi ngbanwe okwu na ngwaọrụ njikwa mpụga site na ọdụ Mkpuchi.

Ikanam agba
Ị nwere ike họrọ agba nke akara okwu lamp ọkụ mgbe emechiri emechi/emechighị.

Usoro njikọ

Jikọọ ọnụ ọnụ mmepụta (RJ45 jacks) na eriri igwe na eriri RJ45 breakout gụnyere site na iji eriri STP dị na azụmaahịa.
- Jikọọ ọnụ mmepụta igwe okwu A na B na RJ45 eriri breakout A na B, n'otu n'otu.
  1. Ọnụ nrụpụta igwe okwu A
  2. Cable STP dị na azụmaahịa (MIC 1 ruo MIC 3)
  3. RJ45 breakout cable A
  4. Mwepụta igwe okwu B
  5. USB STP dị na azụmaahịa (njikwa ọkụ / njikwa mmechi)
  6. RJ45 breakout cable B
Jikọọ ọnụ ọnụ mmepụta na eriri RJ45 breakout na ngwaọrụ nwere ntinye igwe okwu (ntinye ziri ezi) nke dabara na ọkụ ọkụ phantom.
1. MIC 1
2. MIC 2
3. MIC 3
4. Ikanam akara
5. Njikwa mmechi
6. Usoro ATDM DIGITAL SMARTMIXER™
7. Ngwakọta ndị ọzọ
  - Ngwaahịa a chọrọ 20 ruo 52 V DC phantom ike ọkọnọ maka ịrụ ọrụ.
  - Njikọ mmepụta bụ njikọ Euroblock nwere polarity dị ka egosiri na tebụl "Wiring table".

Tebụl waya

Nsonaazụ igwe okwu bụ obere impedance (Lo-Z), ụdị dabara adaba. A na-ewepụta akara n'otu ụzọ njikọ Euroblock ọ bụla na eriri mgbawa RJ45. A na-enweta ntọ ala ọdịyo site na njikọ mkpuchi. Mpụta nke njikọ Euroblock nke ọ bụla bụ dị ka egosiri na ntinye pin.
MIC 1 bụ “O” (omnidirectional) na MIC 2 bụ “L” (bidirectional), ebe edobere ha abụọ na 240° kwụ ọtọ. MIC 3 bụ “R” (bidirectional), ma edobere ya na 120° kwụ ọtọ. A na-ejikọta ihe ndị a iji mepụta ụkpụrụ nduzi na ntụziaka ọ bụla achọrọ.

Usoro PIN nke njedebe mmepụta bụ nke a.

PUTA A
PIN na ọrụ nke njikọ RJ45 na agba nke eriri RJ45 breakout bụ ndị a.

Ntụtụ No. / Ọrụ	USB agba
PIN 1 / MIC 2 L (+)	Agba aja aja
PIN 2 / MIC 2 L (-)	oroma
PIN 3 / MIC 3 R (+)	Akwụkwọ ndụ akwụkwọ ndụ
PIN 4 / MIC 1 O (-)	Ọcha
PIN 5 / MIC 1 O (+)	Uhie
PIN 6 / MIC 3 R (-)	Acha anụnụ anụnụ
PIN 7/GND	Nwa
PIN 8/GND	Nwa

WERE B
Nọmba pin na ọrụ nke njikọ RJ45 na agba nke eriri RJ45 breakout bụ ndị a.

Ntụtụ No. / Ọrụ	USB agba
PIN 1 / oghere	–
PIN 2 / oghere	–
PIN 3 / LED	Akwụkwọ ndụ akwụkwọ ndụ
PIN 4 / oghere	–
PIN 5 / mmechi	Uhie
PIN 6 / oghere	–
PIN 7/GND	Nwa
PIN 8/GND	Nwa

Pin ọrụ

MIC 1

O+
O-
GND

MIC 2

L+

L-
GND

MIC 3

R+
R-

Ikanam akara

GND
Ikanam (akwụkwọ ndụ akwụkwọ ndụ)

Njikwa mmechi

GND
Mkpuchi (acha uhie uhie)

Usoro ntinye

Otu esi ebugo ngwaahịa

A na-etinye ngwaahịa ahụ site na ịkụnye oghere na tebụl na iji ihe nkwụnye ihe nkwụnye okpokoro gụnyere iji chekwaa ya na tebụl.

Kpebie ebe ịchọrọ ịkwanye ngwaahịa ahụ ma gbanye oghere na tebụl na ebe ahụ.
- A chọrọ oghere dayameta 30 mm (1.2 "). Ọzọkwa, kacha ọkpụrụkpụ nke tebụl bụ 30 mm (1.2 ").

Wepu eriri na-edozi skru na ala igwe okwu.
- Jidekwa ma atụfukwala skru nke eriri ewepụpụrụ. Ị ga-achọ ha ma ọ bụrụ na ị kpebie iji ngwaahịa ahụ na-ejikọtaghị ya na tebụl.
Gbakwunye ihe nkwụnye ugwu okpokoro na ala igwe okwu.
- Jikọọ ihe nkwụnye ihe nkwụnye okpokoro na ihe nkwụnye ihe nkwụnye ihe nke gụnyere skru.
- Gbakwunye ihe nkwụnye ugwu okpokoro ka eriri wee na-aga n'akụkụ ihe nkwụnye ihe nkwụnye okpokoro. Agafela eriri ahụ n'ime ime ihe nkwụnye ihe nkwụnye okpokoro.
Nyefee njedebe nke eriri ahụ site na oghere dị na tebụl wee gafere ihe nkwụnye okpokoro okpokoro site na oghere. Na-esote, gafere ihe mgbochi rọba n'akụkụ ihe nkwụnye ọkụ na tebụl ma tinye ya n'ime oghere dị na tebụl, jide n'aka na eriri ahụ na-aga n'akụkụ ntinye na eriri roba.
1. Ihe nkwụnye nkwụnye okpokoro
2. USB
3. Rubber isolator

Gbanwee nghazi nke igwe okwu.
- Gbanwee nghazi nke igwe okwu ka akara Audio-Technica chere ihu n'ihu mgbe eji ya.
Mechie aku na-edozi ka ọ chekwaa igwe okwu.
1. Idozi nut

Ịkwado na-ejighi ihe nkwụnye ihe nkwụnye okpokoro

Mgbe etinyere ya ma tinye ya n'ejighi ihe nkwụnye ihe nkwụnye okpokoro na-enweghị mkpọpu oghere 30 mm (1.2 ") na tebụl, a na-echekwa igwe okwu site na iji oghere abụọ nke egosi na foto dị n'okpuru ebe a.

Wepu eriri na-edozi skru na ala igwe okwu wee jiri skru dị na ahịa. Ogo ịghasa kwesịrị ịbụ M3 P = 0.5 na ogologo ihe nkedo ekwesịghị ịbụ ihe karịrị 7 mm (0.28 ") site na ala nke isi ruo n'ọnụ nke ịghasa.
1. Skru (dị na-ere ahịa)
2. Kpochie oghere

Mkpuchi mbuli ụda

Maka mkpuchi 360°

Na-emepụta ụkpụrụ ntụzi aka mebere hypercardioid anọ na 0°, 90°, 180°, na 270°.
Ntọala a dị mma maka ịdekọ mkparịta ụka n'etiti mmadụ anọ nọ ọdụ na tebụl gburugburu.

Mgbe ị na-ejikọta na usoro ATDM DIGITAL SMARTMIXER™, ụdị ntinye maka ọwa ntinye 1-3 ka edobere ka ọ bụrụ "Virtual Mic" na ndabara, agbanyeghị, ọ bụrụ na a ga-ekewa mkpuchi mkpuchi ụda n'ime akụkụ anọ ma ọ bụ karịa dị ka egosiri na mbụ a.ample, tọọ ụdị ntinye ka ọ bụrụ “Virtual Mic” maka ọwa ntinye 4 wee gawa n'ihu. Maka ntuziaka ọrụ zuru ezu, rụtụ aka na ntuziaka onye ọrụ ATDM usoro DIGITAL SMARTMIXER™.

Maka mkpuchi 300°

Na-emepụta ụkpụrụ ntụzi aka mebere cardioid atọ (Wide) na 0°, 90°, na 180°.

Ntọala a dị mma maka ịkpọlite mkparịta ụka n'etiti mmadụ atọ nọ ọdụ na njedebe nke tebụl.

Mgbe ị na-etinye 2 ma ọ bụ karịa nke ngwaahịa a
Anyị na-akwado ka edowe igwe okwu opekata mpe 1.7m (5.6′) (maka ntọala hypercardioid (Normal) iche ka mkpuchi nke igwe okwu ọ bụla ghara ịgbakọ.

Ntọala igwekota

Iji usoro ATDM DIGITAL SMARTMIXER™
Ngwa ngwa nke usoro ATDM DIGITAL SMARTMIXER™ kwesịrị ịdị ọhụrụ tupu eji ya.

Malite nke Web Ime ime, họrọ “Administrator” wee banye.
Maka ntọala na arụmọrụ na-esote, rụtụ aka na akwụkwọ ntuziaka ATDM usoro DIGITAL SMARTMIXER™.

Mgbe ị na-eji igwekota ndị ọzọ
Mgbe ị na-eji ngwaahịa a na igwekota ọzọ na-abụghị usoro ATDM DIGITAL SMARTMIXER™, ị nwere ike ịhazigharị mmepụta nke ọwa ọ bụla dịka matriks agwakọta na-esote iji jikwaa ntụzịaka.

Mgbe matriks agwakọta bụ "Nkịtị"

Ntuziaka mbupu	O		L		R
Ntuziaka mbupu	φ	Ọkwa	φ	Ọkwa	φ	Ọkwa
0°	+	-4 dB	–	0 dB	–	0 dB
30°	+	-4 dB	–	+ 1.2 dB	–	-4.8 dB
60°	+	-4 dB	–	0 dB		- ∞
90°	+	-4 dB	–	-4.8 dB	+	-4.8 dB
120°	+	-4 dB		- ∞	+	0 dB
150°	+	-4 dB	+	-4.8 dB	+	+ 1.2 dB
180°	+	-4 dB	+	0 dB	+	0 dB
210°	+	-4 dB	+	+ 1.2 dB	+	-4.8 dB
240°	+	-4 dB	+	0 dB		- ∞
270°	+	-4 dB	+	-4.8 dB	–	-4.8 dB
300°	+	-4 dB		- ∞	–	0 dB
330°	+	-4 dB	–	-4.8 dB	–	+ 1.2 dB

Mgbe matriks agwakọta bụ "Wide"

Ntuziaka mbupu	O		L		R
Ntuziaka mbupu	φ	Ọkwa	φ	Ọkwa	φ	Ọkwa
0°	+	0 dB	–	0 dB	–	0 dB
30°	+	0 dB	–	+ 1.2 dB	–	-4.8 dB
60°	+	0 dB	–	0 dB		- ∞
90°	+	0 dB	–	-4.8 dB	+	-4.8 dB
120°	+	0 dB		- ∞	+	0 dB
150°	+	0 dB	+	-4.8 dB	+	+ 1.2 dB
180°	+	0 dB	+	0 dB	+	0 dB
210°	+	0 dB	+	+ 1.2 dB	+	-4.8 dB
240°	+	0 dB	+	0 dB		- ∞
270°	+	0 dB	+	-4.8 dB	–	-4.8 dB
300°	+	0 dB		- ∞	–	0 dB
330°	+	0 dB	–	-4.8 dB	–	+ 1.2 dB

Iji Ngwaahịa

Ịgbanwe n'etiti ogbi na mkpọpu

Metụ mgbanwe okwu otu ugboro.
- Oge ọ bụla ị metụrụ mgba ọkụ okwu aka, igwe okwu na-agbanwe n'etiti ogbi/mmepu.
- Ị nwere ike ịgbanwe ntọala ọrụ ogbi site na "SW. Ọrụ” mgba ọkụ. Maka nkọwa, hụ "Gbanwee ntọala na ọrụ".
  Ihe ngosi okwu lamp ọkụ.
  1. Mgbanwe okwu
  2. Ihe ngosi okwu lamp

Ị nwere ike ịgbanwe agba LED nke ihe ngosi okwu lamp jiri akara “MIC ON” na “MIC Gbanyụọ” n'okpuru “LED COLOR.” Maka nkọwa, hụ "Ịtọlite agba LED".

Gbanwee ntọala na ọrụ

SW. Ọrụ
njikwa
Ikanam agba
Ọkwa mmechi kọntaktị (ọkwa ọrụ igwe okwu)

Ịtọlite agba agba LED
Ị nwere ike họrọ LED agba nke okwu egosi lamp na-enwu mgbe agbanyere / gbanyụọ igwe okwu.

Gbanyụọ ọkpụkpọ “MIC Gbanyụọ”/“MIC ON” ka ọ bụrụ ọnụọgụ agba nke ịchọrọ ịtọ maka ọnọdụ mgbanyụ ma ọ bụ gbanyụọ igweokwu ahụ.

Nọmba	Agba agba
Δ	Agbanyeghị ọkụ
1	Uhie
2	Akwụkwọ ndụ akwụkwọ ndụ
3	Odo
4	Acha anụnụ anụnụ
5	Magenta
6	Cyan
7	Ọcha

Ọ bụrụ na njikwa bụ "mpaghara"
Ị nwere ike ịtọ ọnọdụ ọrụ na otu n'ime ụdị atọ: "KỤKWU ON/ Gbanyụọ" (emetụ aka / gbanyụọ), "MOM. GBANYE (mmetụ-ka-okwu), ma ọ bụ “MOM. Gbanyụọ” (metụ-ka-ogbi).

Ọ bụrụ na SW. ỌRỤ bụ “MKWUO/ Gbanyụọ” (emetụ-na/mpụpụ)

Oge ọ bụla ị metụrụ mgba ọkụ okwu aka, a na-agbanye ma gbanyụọ igwe okwu.
Mgbe agbanyere igwe okwu, ọkụ LED na agba ahọpụtara n'okpuru "MIC ON," na mgbe agbanyụrụ ya, ọkụ ọkụ na agba ahọpụtara n'okpuru "MIC OFF."

Ọ bụrụ na SW. Ọrụ bụ “MAMA. GBANYE" (metụ-ka-okwu)

A na-agbanye igwe okwu ma ọ bụrụhaala na ị na-emetụ mgba ọkụ okwu. A na-agbanyụ igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.
Mgbe agbanyere igwe okwu, ọkụ LED na agba ahọpụtara n'okpuru "MIC ON," na mgbe agbanyụrụ ya, ọkụ ọkụ na agba ahọpụtara n'okpuru "MIC OFF."

Ọ bụrụ na SW. Ọrụ bụ “MAMA. Gbanyụọ" (metụ-ka-ogbi)

A na-agbanyụ igwe okwu ma ọ bụrụhaala na ị na-emetụ ngbanwe okwu. A na-agbanye igwe okwu mgbe ị kwụsịrị imetụ mgbanwe okwu aka.
Mgbe agbanyụrụ igwe okwu ahụ, ọkụ LED na agba ahọpụtara n'okpuru "MIC OFF," na mgbe agbanyere ya, ọkụ ọkụ na agba ahọpụtara n'okpuru "MIC ON."

Ọ bụrụ na njikwa bụ "REMOTE"

Ị nwere ike ịtọ ọnọdụ ọrụ na otu n'ime ụdị atọ: "KỤKWU ON/ Gbanyụọ" (emetụ aka / gbanyụọ), "MOM. GBANYE (mmetụ-ka-okwu), ma ọ bụ “MOM. Gbanyụọ” (metụ-ka-ogbi). Agbanyeghị, igwe okwu na-anọgide na nke ọ bụla n'ime ụdịdị ndị a, yana naanị ọkụ nke ihe ngosi okwu lamp mgba ọkụ.
Ngwa njikwa mpụga agbanyere ma gbanyụọ igwe okwu.

Ọ bụrụ na SW. ỌRỤ bụ “MKWUO/ Gbanyụọ” (emetụ-na/mpụpụ)
Oge ọ bụla ị metụrụ mgbanwe okwu aka, akara okwu lamp nke na-egosi ma igwe okwu agbanyụrụ/ gbanyụọ.

Ọ bụrụ na SW. Ọrụ bụ “MAMA. GBANYE" (metụ-ka-okwu)
Ihe ngosi okwu lamp na-egosi na igwe okwu dị n'ọkụ ka ị na-emetụ ihe mgbanwe okwu na akara okwu lamp na-egosi na igwe okwu na-agbanyụ ọkụ mgbe ị kwụsịrị imetụ mgbanwe okwu aka.

Ọ bụrụ na SW. Ọrụ bụ “MAMA. Gbanyụọ" (metụ-ka-ogbi)
Ihe ngosi okwu lamp nke ahụ na-egosi na igwe okwu agbanyụrụ ọkụ ka ị na-emetụ ihe mgbanwe okwu aka. Ihe ngosi okwu lamp nke ahụ na-egosi na igwe okwu dị n'ọkụ mgbe ị kwụsịrị imetụ mgbanwe okwu aka.

Ọ bụrụ na njikwa bụ "LED REMOTE"

Ị nwere ike ịtọ ọnọdụ ọrụ na otu n'ime ụdị atọ: "KỤKWU ON/ Gbanyụọ" (emetụ aka / gbanyụọ), "MOM. GBANYE (mmetụ-ka-okwu), ma ọ bụ “MOM. Gbanyụọ” (metụ-ka-ogbi). Agbanyeghị, igwe okwu na-anọgide na nke ọ bụla n'ime ụdịdị ndị a, yana ọkụ nke ihe ngosi okwu lamp anaghị agbanwe agbanwe.
A na-agbanye ma gbanyụọ igwe okwu yana ọkụ nke ihe ngosi okwu lamp ejiri ngwaọrụ njikwa mpụga gbanwee.

Ọ bụrụ na SW. ỌRỤ bụ “MKWUO/ Gbanyụọ” (emetụ-na/mpụpụ)
Igwe okwu anaghị agbanwu/ gbanyụọ ọbụlagodi ma ị metụ mgba ọkụ okwu aka. Ọkụ nke ihe ngosi okwu lamp Ejikọtaghị ya na arụ ọrụ igwe igwe. Ngwa mpụga na-achịkwa ya kama.

Ọ bụrụ na SW. Ọrụ bụ “MAMA. GBANYE" (metụ-ka-okwu)
Igwe okwu anaghị agbanwu/ gbanyụọ mgbe ị na-emetụ ihe ngbanwe okwu ma ọ bụ mgbe ị naghị emetụ ihe ngbanwe okwu. Ọkụ nke ihe ngosi okwu lamp Ejikọtaghị ya na arụ ọrụ igwe igwe. Ngwa mpụga na-achịkwa ya kama.

Ọ bụrụ na SW. Ọrụ bụ “MAMA. Gbanyụọ" (metụ-ka-ogbi)
Igwe okwu anaghị agbanwu/ gbanyụọ mgbe ị na-emetụ ihe ngbanwe okwu ma ọ bụ mgbe ị naghị emetụ ihe ngbanwe okwu. Ọkụ nke ihe ngosi okwu lamp Ejikọtaghị ya na arụ ọrụ igwe igwe. Ngwa mpụga na-achịkwa ya kama.

Nhicha

Banye n’omume nke ihicha ngwaahịa ahụ oge niile iji hụ na ọ ga-adịgide ogologo oge. Ejila mmanya, agba agba, ma ọ bụ ihe mgbaze ndị ọzọ maka nhicha.

Jiri akwa kpọrọ nkụ hichapụ unyi na ngwaahịa ahụ.
Ọ bụrụ na eriri na-aghọ unyi n'ihi ọsụsọ, wdg, hichaa ha na akwa akọrọ ozugbo ejiri ya. Ọdịda ihicha eriri ndị ahụ nwere ike ime ka ha daa ma sie ike ka oge na-aga, na-ebute nsogbu.
- Ọ bụrụ na a gaghị eji ngwaahịa ahụ ogologo oge, chekwaa ya na ebe dị mma nke na-ekpo ọkụ site na okpomọkụ na iru mmiri.

Nchọpụta nsogbu

Igwe okwu anaghị emepụta ụda ọ bụla

Gbaa mbọ hụ na ejikọrọ ọnụ ọnụ mmepụta A na B na ebe njikọ ziri ezi.
Jide n'aka na ejikọrọ eriri breakout A na B na ebe njikọ ziri ezi.
Gbaa mbọ hụ na ejikọrọ eriri njikọ nke ọma.
Gbaa mbọ hụ na ngwaọrụ ejikọrọ na-enye ike nke ọma.
Gbaa mbọ hụ na edobeghi ngwaọrụ njikwa mpụga ka ọ daa ogbi.

Ihe ngosi okwu lamp adịghị ọkụ

Gbaa mbọ hụ na akpọghị “MIC ON”/“MIC Gbanyụọ” maka “LED COLOR” ka edobeghi “Δ ” (enweghị ọkụ).
Gbaa mbọ hụ na ngwaọrụ ejikọrọ na-enye ike nke ọma na voltage ziri ezi.
Gbaa mbọ hụ na edoghị ngwaọrụ njikwa mpụga ka ọ gbanyụọ ihe ngosi okwu lamp.

Akụkụ

Igwe okwu

Ihe nkwụnye nkwụnye okpokoro

Nkọwapụta

Ihe	Ofu-azụ ụgwọ efere, na-adịgide adịgide ekekọta condenser
Ụkpụrụ polar	Ndozi: Cardioid (obosara) / Hypercardioid (Nkịtị)
Nzaghachi ugboro ugboro	20 ruo 15,000 Hz
Mepee sekit uche	Ogologo: -33 dBV (22.4 mV) (0 dB = 1 V/Pa, 1 kHz) Nkịtị: -35 dBV (17.8 mV) (0 dB = 1 V/Pa, 1 kHz)
Mgbochi	100 ohm
Oke ndenye ụda dị elu	Obosara/Nkịtị: 136.5dB SPL (1 kHz na 1% THD)
Oke mgbaàmà na mkpọtụ	Ogologo: 68.5 dB (1 kHz na 1 Pa, A-arọ) Nkịtị: 67.5 dB (1 kHz na 1 Pa, A-arọ)
Gbanwee	SW. ỌRỤ: Kpọtụrụ/ Gbanyụọ, Nne. ONYE, MOM. MKWUO: MGBE, REMOTE, LED REMOTE
Phantom ike chọrọ	20 ruo 52 V DC, 19.8mA (ngụkọta ọwa niile)
Mmechi kọntaktị	Ntinye mmechi voltage: -0.5 ruo 5.5 V ike kachasị ike: 200 mW Na-eguzogide: 100 ohms
Ikanam akara	Elu dị elu (+5 V DC) TTL dakọtara Arụ ọrụ obere voltage: 1.2V ma ọ bụ obere Ike ntinye ikike kacha mma: -0.5 ruo 5.5V ike kacha ekwe omume: 200mW
Ibu	Igwe okwu: 364g (13 oz)
Akụkụ (igwe okwu)	Dayameta kacha (ahụ): 88 mm (3.5 ") Ogologo: 22 mm (0.87")
Njikọ mmepụta	Njikọ Euroblock
gụnyere ngwa	RJ45 breakout cable × 2, table mount adapter, fixing nut, roba isolator, table mount adapter arịọnụ ịghasa × 3

1 Pascal = 10 dynes/cm2 = 10 microbars = 94 dB SPL
Maka nkwalite ngwaahịa, ngwaahịa a ga-agbanwe agbanwe na-enweghị ọkwa.

Ụkpụrụ Polar/Nzaghachi ugboro ugboro

Hypercardioid (Nkịtị)

Ụkpụrụ polar

Nzaghachi ugboro ugboro

Cardioid (obosara)