SIEMENS VCC2002-A1 Shigar da murya/Katin fitarwa

Model VCC2002-A1 Katin Muryar I/O an shigar dashi cikin FV2025/2050 Wuta Control Panel na tsarin FS20. Tare da VCC2001-A1 Voice CPU katin da ɗaya ko fiye VCI2001-U1 Ampkatunan lifier, yana ba da damar sanarwar murya don yin sanarwar ta hanyar Wuta/Murya tsarin.

SIFFOFI
Babban fasali na VCC2002-A1 sun haɗa da:

• Codec na ciki:
  • Yana canza sautin analog daga microphones, Mass Notification Systems (MNS), da sauran hanyoyin waje zuwa siginar sauti na dijital.
  • Yana canza siginar sauti na dijital zuwa analog don amfani a wasu sassan tsarin ko tare da kayan aiki na waje
• Attenuation da ampinganta sauti mai shigowa
• Haɗi don makirufo mai nisa na zaɓi na zaɓi da ƙirar murya
•  Maimaita CAN don abubuwan haɗin waje (Channel 1 kawai)
•  Haɗi don daidaitawa guda biyu (2), tashoshin shigar da sauti na lokaci ɗaya da tashoshi biyu (2) fitarwa na sauti, 1 na ciki da 1 na waje
• Rarraba wutar lantarki na 24VDC, ƙayyadaddun ƙayyadaddun halin yanzu, da kariyar gajeriyar kewayawa don samfuran da aka haɗa da Cage Card
• Halin aiki ta hanyar nunin LED
• Ikon ƙararrawa biyu (amfani na gaba)
• EMC mai yarda
• ROHS mai yarda da saduwa da ƙayyadaddun ayyuka a cikin kewayon zafin masana'antu
• Ana iya amfani dashi a cikin kasuwar UL da ULC

GABATARWA

Kafin shigar da Katin Muryar I/O VCC2002-A1 a cikin Cage Card VCA2002-A1, saita masu tsalle akan katin don ko dai su kula ko ba su kula da shigarwar da fitar da layukan sauti ba. Kulawa yana nufin saka idanu ta atomatik na layukan sigina don gajeriyar yanayi ko buɗewa. Layin da ake kulawa zai sami resistor ƙarshen layi (EOL) a ƙarshen layin don saita matakin son zuciya na DC. Lokacin da resistor ya kasance, DC voltage yana a wata ƙima. Wannan DC voltage matakin zai canza idan layin ko dai yana buɗewa ko gajere. Wannan DC son zuciya voltage ana lura da shi ta hanyar mai canzawa zuwa dijital wanda ke bawa tsarin damar karanta duk voltage matakan kuma ƙayyade idan gajere ko buɗewa ya faru.
Hoto na 2 yana kwatanta wuraren masu tsalle-tsalle akan Katin Muryar I/O da Table 1 ya lissafa saitunan jumper waɗanda ake amfani da su don kunna kulawa don shigarwa da tashoshin fitarwa. Duk masu tsalle-tsalle na kowane tashoshi dole ne su kasance a matsayi ɗaya, ko dai ana kulawa ko kuma ba a kula da su ba, don katin ya yi aiki daidai.

Tashoshi	Jumper ID	Matsayin Jumper don Tashoshi Mai Kulawa	Matsayin Jumper don Channel mara kulawa
Audio Input 1	X401	2-3	1-2
	X400	1-2	2-3
Audio Input 2	X403	2-3	1-2
	X402	1-2	2-3
Fitar Audio	X601	2-3	1-2
	X600	1-2	2-3

HANKALI: Idan za a aiwatar da layukan shigar da sauti masu kulawa, tabbatar da cewa duk wani na'ura mai jiwuwa da aka haɗa ya dace da 18VDC volvision vol.tage

AIKI

Da fatan za a koma ga Hoto na 3.
Babban ayyuka na katin VCC2002-A1 Voice I/O Card sune:

• Interface tare da VTO2004-U2/U3 Microphone Module da VTO2001-U2/U3 Option Module (24 Switches).
• Samar da analog zuwa canjin dijital na sanarwar da aka tura zuwa Katin CPU na Muryar VCC2001-A1
• Bayar da dijital zuwa canjin analog na sanarwar da aka kore daga VCC2001-A1 Voice CPU Card zuwa na'urorin sanarwar waje.
• Rarraba da kula da ikon 24VDC
• Samar da kulawar DC na wayoyi na waje
• Samar da aikin maimaita bas na CAN

Sarrafa da Manuniya

Katin I/O VCC2002-A1 ya ƙunshi:

• LEDs masu bincike guda takwas
• LED Power daya

Duk waɗannan alamomin suna kusa da gefen katin kuma ana iya gani ta murfin gaban Card Cage.

LED ID	LAUNIYA	JIHAR AL'ADA	JIHAR MAI AIKI	LAIFIN LAFIYA	BAYANI
Shigarwa 1 Mai Aiki	Kore	Kashe	On	─	Tashar 1 Mai Aiki
Shigar da Laifi 1	Yellow	Kashe	─	On	Laifin Channel 1
Shigarwa 2 Mai Aiki	Kore	Kashe	On	─	Laifin Channel 2
Shigar da Laifi 2	Yellow	Kashe	─	On	Laifin Channel 2
Audio Out Active	Kore	Kashe	On	─	Fitar Sauti Mai Aiki
Audio Out Kasa	Yellow	Kashe	─	On	Laifin Fitar Audio
24V-CAN Kasa	Yellow	Kashe	─	On	24V ko CAN Laifin Bas
Rashin Katin	Yellow	Kashe	─	On	Rashin gazawar katin
Ƙarfi	Kore	On	─	Kashe	+ 3.3VDC Power
Audio Out Kasa	Yellow	Kashe	─	On	Laifin Fitar Audio

Canja Abubuwan Shiga/Sake fitarwa

Abubuwan shigar da maƙasudi na gama gari guda biyu da fitarwar rufewa guda ɗaya suna samuwa zuwa/daga katin VCC-I/O. Ana iya amfani da kowace shigarwar sauyawa don nuna kasancewar siginar analog na waje akan shigarwar sauti ta Channel 2 (idan an yi amfani da ita). Ana amfani da fitarwar rufe lambar sadarwa don nuna cewa sautin fitarwa daga tsarin yana aiki.
Abubuwan shigarwa (canza 1 da sauyawa 2): Dole ne a samar da ƙulli (680Ω) ta hanyar tushen sauti na waje. Ana iya haɗa wannan ƙulli zuwa kowane shigarwar sauyawa. Wannan zai nuna wa tsarin cewa ana amfani da siginar sauti na analog zuwa tashar shigar da sauti. Rufaffen lamba yana nuna cewa shigar da sauti zuwa tashar yana aiki yayin da buɗaɗɗen lamba yana nufin shigar da sautin baya aiki. Za a iya amfani da saitin lambobin sadarwa na biyu na zaɓi don wasu dalilai idan an buƙata. Fitowa: Fitowar tuntuɓar hanyar sadarwa akan katin VCC-I/O yana rufe don nuna wa na'urar waje cewa fitarwar mai jiwuwa tana aiki. Lokacin da fitarwa mai jiwuwa ke aiki, ana rufe lambar relay. Lokacin da babu fitarwa mai jiwuwa lambar sadarwar relay tana buɗewa. Wannan keɓantaccen rufewar lamba ce. Dole ne na'urar da aka haɗa waje ta samar da nata voltage don saka idanu akan yanayin sadarwar relay.

Cire wutar lantarki kafin yin aiki akan kayan aiki. 

Don hawa VCC-I/O a cikin kejin katin: 

1. Bude ƙofar ciki na FV2025/2050 Wuta Control Panel.
2. Cire latch ɗin a tsakiyar ƙasa na murfin gaban Card Cage kuma zame murfin sama har sai ya share taron Card Cage.
3. Koma zuwa Hoto 5. Rike VCC2002-A1 don haka ƙarfin ikon sarrafa ƙarar guda biyu suna saman katin, a hankali saka katin a cikin mahaɗin baya mai alamar X201 (matsayin hagu mafi nisa na kejin katin). Yi amfani da jagororin tashoshi masu tasowa a sama da ƙasa na Cage Card don jagorance shi zuwa wurin.
   HANKALI: Lokacin shigar da VCC2002-A1 cikin haɗin haɗin jirgin baya, guje wa yin amfani da sama da ƙasa na kejin katin don amfani. Madadin haka, matsa a hankali a tsakiyar hannun katin filastik ɗin da aka ƙera har sai katin ya kama wurin. Tabbatar cewa katin yana daidai da gaban Katin Cage kuma an sanya shi tsakanin jagororin katunan ƙarfe guda biyu da aka zana a sama da ƙasa na Cage Card. Katin yana buƙatar kasancewa tsakanin dukkan jagororin katin guda uku yayin da aka zame shi cikin wuri don yin daidai da mahaɗin jirgin baya.
   GARGADI: Don guje wa lalata katin VCC2002-A1 ko mai haɗin jirgin baya, KAR KA TALLATA KATIN MATSAYI.
4. Sauya murfin Cage Card ta hanyar sake saka shi a saman kejin kuma zame shi zuwa ƙasa har sai ya isa kasan taron.
5. Mayar da lashin baya cikin murfin Katin Cage.

Cire Katin I/O Voice daga Cage Card

1. Da farko cire wuta daga Cage Card.
2. Cire latch ɗin a tsakiyar ƙasa na murfin gaban katin Cage VCA2002-A1 kuma zame murfin sama.
3. Rike Katin VCC2001-A1 ta hannun katin filastik da aka ƙera kuma cire katin a hankali daga mai haɗin jirgin baya.
4. Sauya murfin Katin Cage kuma sake saka latch ɗin.

WIRING

Duk sigina zuwa/daga na'urorin zaɓi ko wasu na'urori ana haɗa su zuwa katin VCC-I/O ta Katin Cage Connectors X401, X402, X403, da X102 dake kan VCA2002-A1 Card Cage. Ana nuna wayoyi don waɗannan masu haɗawa a cikin Tebu 4 na Siemens Industry, Inc., Rukunin Fasahar Gina, lambar daftarin aiki A6V10380472 Umarnin Shigarwa na Model VCA2002-A1 Card Cage. Tebur masu zuwa suna taƙaita waɗannan haɗin gwiwa kuma an haɗa su nan don tunani.

X401 Pin	Aiki	Sharhi
1	24VDC Fitar Ch1	+ 24VDC iko kuma komawa zuwa Moduloli masu nisa
2	24VDC Ret Ch1
3	CAN H Ch1	Haɗin Bus na CAN zuwa Module mai nisa
4	CAN L Ch1
5	Duniya
6	Duniya
7	Sauti a cikin Ch1 +	Bar komai idan ba a yi amfani da na'urori masu nisa akan wannan layin ba. In ba haka ba, sanya filogi mai ƙarewa a ƙarshen ƙirar nesa. (Ƙarshen Adaftar Layi A5Q00055918D)
8	Sauti a cikin Ch1 -

Karshen resistors

Shigar da 3.3K ohm masu ƙarewa a kan tashoshi na Masu Haɗin Filin Katin Muryar I/O, X402 & X403, wanda ke saman hagu na jirgin baya na Card Cage kamar yadda aka nuna a cikin tebur masu zuwa.
NOTE: Dole ne a sami matosai masu ƙarewa a ƙarshen layi lokacin da ake amfani da Modulolin Zaɓi.

X402 Pin	Aiki	Ƙarshen Resistor (EOL)	Sharhi
1	(BA A AMFANI)
2	(BA A AMFANI)
3	(BA A AMFANI)
4	(BA A AMFANI)
5	Duniya
6	Duniya
7	Sauti a cikin Ch2 +	3.3k Ohm C24235-A1-K14	Shigar da resistor EOL idan ba a yi amfani da na'urori masu nisa ba. Cire resistor EOL idan ana amfani da na'urori masu nisa kuma sanya a
8	Sauti a cikin Ch2 -

X403 Pin	Aiki	Resistor mai Karewa*	Sharhi
1	Audio Out+	3.3K Ohm C24235-A1-K14	Shigar da resistor EOL akan X403 idan ba'a haɗa shi da na'urar waje ba. Dole ne a matsar da resistor EOL zuwa ƙarshen layi lokacin da ake amfani da kulawa.
2	Audio Out-
3	Audio Out Active Ch1+
4	Audio Out Active Ch1-
5	Canja 1 Input +	3.3K Ohm C24235-A1-K14	Shigar da resistor EOL akan X403 idan ba'a haɗa shi da na'urar waje ba. Dole ne a matsar da resistor EOL zuwa ƙarshen layi lokacin da ake amfani da wannan shigarwar.
6	Canja Shigar 1 -
7	Canja 2 Input +	3.3K Ohm C24235-A1-K14	Shigar da resistor EOL akan X403 idan ba'a haɗa shi da na'urar waje ba. Dole ne a matsar da resistor EOL zuwa ƙarshen layi lokacin amfani da wannan shigarwar.
8	Canja Shigar 2 -
9	Ƙararrawa na waje+	3.3Kh ku Saukewa: C24235-A1-K14
10	Ƙararrawa na waje -

X102	Aiki	Ƙarshen Resistor (EOL)	Sharhi
	Mai Haɗin Module Zaɓin Gida	EOL Ƙarshen Layi (Ƙarshen Adaftar Layi) A5Q00055918D	Shigar da Adaftar EOL akan X102 idan ba a yi amfani da Module(s) zaɓi na ciki ba. Dole ne a matsar da adaftar EOL zuwa Module Zaɓuɓɓuka na ƙarshe na ciki lokacin da aka sanye shi.

KWATANCIN KWALITA

Katin Muryar I/O VCC2002-A1
Shigar da Kati	Voltage	24VDC, 3.3VDC
	A halin yanzu	151 mA (A jiran aiki) 156mA (Aiki)
Fitarwa 1 (X401 akan Cage Card)	Voltage	Saukewa: 24VDC
	A halin yanzu	4A, max*
Fitarwa 2 (X402 akan Cage Card)	Voltage	Saukewa: 24VDC
	A halin yanzu	4A, max*

NOTE: Ana raba 4A tsakanin X401 da X402. Matsakaicin haɗe-haɗe don abubuwan duka biyu dole ne su wuce 4A yayin haɗa na'urori akan X401 da X402.

Tsaro na Cyber

Siemens yana ba da fayil ɗin samfura, mafita, tsari da sabis waɗanda suka haɗa da ayyukan tsaro waɗanda ke tallafawa amintaccen aiki na tsirrai, tsarin, injina da hanyoyin sadarwa. A fagen Fasahar Gine-gine, wannan ya haɗa da ginin sarrafa kansa da sarrafawa, amincin wuta, sarrafa tsaro da tsarin tsaro na zahiri.
Domin kare tsire-tsire, tsarin, inji da cibiyoyin sadarwa daga barazanar yanar gizo, ya zama dole a aiwatar da - kuma a ci gaba da kiyayewa - cikakkiyar ra'ayi na tsaro na zamani. Fayil na Siemens ya samar da kashi ɗaya kawai na irin wannan ra'ayi. Kuna da alhakin hana shiga mara izini ga tsire-tsirenku, tsarin, injina da hanyoyin sadarwar ku waɗanda yakamata a haɗa su zuwa cibiyar sadarwar kasuwanci ko intanit idan kuma gwargwadon irin wannan haɗin ya zama dole kuma kawai lokacin matakan tsaro da suka dace (misali Firewalls da/ko network segmentation) suna cikin wurin. Bugu da ƙari, ya kamata a yi la'akari da jagorancin Siemens game da matakan tsaro da suka dace. Don ƙarin bayani, tuntuɓi wakilin tallace-tallace na Siemens ko ziyarci https://www.siemens.com/global/en/home/company/topicareas/ gaba-na-manufacturer/masana'antu-tsaro.html.
Siemens' portfolio yana ci gaba da ci gaba don tabbatar da shi mafi aminci. Siemens yana ba da shawarar yin amfani da sabuntawa da zarar an samu kuma ana amfani da sabbin sigar. Amfani da nau'ikan da ba a tallafawa, da rashin amfani da sabbin abubuwan sabuntawa na iya ƙara haɗarin ku ga barazanar yanar gizo. Siemens yana ba da shawarar da ƙarfi don bin shawarwarin tsaro kan sabbin barazanar tsaro, faci da sauran matakan da suka danganci, da aka buga, da sauransu, ƙarƙashin https://www.siemens.com/cert/en/cert-security-advisories.htm.

Siemens Industry, Inc. Smart Infrastructure Florham Park, NJ
Siemens Canada, Ltd. girma
1577 Hanyar Sabis ta Arewa Gabas Oakville, Ontario L6H 0H6 Kanada
ID na takarda: A6V10397774_en–_b P/N A5Q00057953

Takardu / Albarkatu

SIEMENS VCC2002-A1 Shigar da murya/Katin fitarwa [pdf] Jagoran Jagora VCC2002-A1 Katin fitarwar murya, VCC2002-A1, Katin shigar da murya, Katin fitarwa

Magana

• Manual mai amfani