Automate Core Tilt Motor User Manual
I-Automate™ CORE TILT MOTOR IMIYALELO
SEBENZISA LO MBHALO NGEZIMOTO EZLANDELAYO:
| INGXENYE INOMBOLO | DESCRIPTION |
| MT01-4001-xxx002 | I-Passthrough Tilt Motor Kit |
| I-MTDCRF-TILT-1 | Shintshanisa amasheya VT Motor |
IZIYALELO ZOKUPHEPHA
ISEXWAYISO: Imiyalelo yokuphepha ebalulekile okufanele ifundwe ngaphambi kokufakwa.
Ukufaka okungalungile kungaholela ekulimaleni okubi kakhulu futhi kuzosusa isikweletu somkhiqizi kanye newaranti.
ISEXWAYISO
- Ungavumeli umswakama noma amazinga okushisa adlulele.
- Ungavumeli izingane ukuthi zidlale ngale divayisi.
- Ukusetshenziswa noma ukuguqulwa ngaphandle kobubanzi baleli bhukwana lemiyalo kuzokwenza iwaranti ingasebenzi.
- Ukufaka nokuhlela kuzokwenziwa isifaki esifanelekayo.
- Ukuze isetshenziswe ngaphakathi kwama-blind blinds.
- Qinisekisa ukuthi umqhele olungile kanye nama-adaptha okushayela asetshenziselwa uhlelo oluhlosiwe.
- Gcina uthi lwensimbi luqondile futhi lucacile ezintweni zensimbi
- Ungalunqamuli uthi.
- Sebenzisa ihadiwe ye-Rollease Acmeda kuphela.
- Ngaphambi kokufaka, susa noma yiziphi izintambo ezingadingekile futhi ukhubaze noma yiziphi izinto ezisetshenziswayo ezingadingeki ekusebenzeni okunamandla.
- Qinisekisa ukuthi i-torque nesikhathi sokusebenza kuyahambisana nohlelo lokusebenza lokugcina.
- Ungayibeki injini emanzini noma uyifake kumswakama noma damp izindawo.
- I-Motor kufanele ifakwe ohlelweni oluvundlile kuphela.
- Musa ukubhoboza emzimbeni motor.
- Ukuhanjiswa kwekhebula ezindongeni kufanele kuvikelwe ngokuhlukanisa izihlahla noma ama-grommets.
- Qinisekisa ukuthi ikhebula lamandla ne-aerial icacile futhi ivikelekile ezingxenyeni ezihambayo.
- Uma ikhebula noma isixhumi samandla sonakele ungasisebenzisi.
Imiyalelo yokuphepha ebalulekile okufanele ifundwe ngaphambi kokusebenza.
- Kubalulekile ukuphepha kwabantu ukulandela imiyalelo ebiyelwe. Gcina le miyalo ukuze ubhekise kuyo esikhathini esizayo.
- Abantu (kufaka phakathi izingane) abanamakhono anciphisiwe omzimba, wezinzwa noma engqondo, noma abanesipiliyoni nolwazi abanakuvunyelwa ukusebenzisa lo mkhiqizo.
- Gcina izilawuli kude kude nezingane.
- Njalo hlola ukusebenza okungafanele. Ungayisebenzisi uma kudingeka ukulungiswa noma ukulungiswa.
- Gcina i-motor kude ne-asidi ne-alkali.
- Ungaphoqi i-motor drive.
- Gcina kucace lapho kusebenza.
Ungalahli imfucuza evamile.
Sicela usebenzise kabusha amabhethri nemikhiqizo kagesi eyonakele ngendlela efanele.
Ukuthobelana kwe-FCC yomsakazo wase-US
Le divayisi ithobela Ingxenye 15 Yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- Le divayisi ingase ingabangeli ukuphazamiseka okuyingozi, futhi
- Lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Lesi sixhobo sihloliwe futhi kwatholakala ukuthi sithobela imikhawulo yedivayisi yedijithali ye-Class B, ngokususelwe kuNgxenye 15 ye-FCC.
Imithetho. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala.
Lesi sixhobo sikhiqiza, sisebenzise, futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:
- Hlela kabusha noma hambisa uthi olwamukelayo.
- Khulisa ukuhlukana phakathi kwesisetshenziswa nomamukeli.
- Xhuma okokusebenza endaweni yokuphuma kuyisekethe ehlukile kuleyo lapho umamukeli axhumeke khona.
- Xhumana nomthengisi noma uchwepheshe werediyo/TV onolwazi ukuze usize.
Noma yiziphi Izinguquko noma ukuguqulwa okungagunyazwanga ngokucacile yinhlangano enesibopho sokuthobela imithetho kungasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Isexwayiso se-ISED RSS:
Le divayisi ithobelana nezinga le-RSS le-RSS le-RSS ekhishwe yilayisensi ye-Innovation, Science and Economic Development Canada. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
- lolu cingo kungenzeka lungabangeli ukuphazamiseka, futhi
- lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafunwa kocingo.
1 UMHLANGANO WE-CORE TILT MOTOR
- Hlanganisa ukumisa okulungile njengoba kudingeka
- Hlukanisa umhlangano okhona wokulawula we-venetian manual
- Faka i-motor assembly ekhona kakade ye-venetian head rail
- Phinda ufake induku etshekile phakathi kwe-motor assembly & spools
- Namathisela ikhava yokulawula ukushintsha
2 UKUSEBENZA KWESITHUTHU SAMA-CORE TILT MOTOR
- I-Optional Control Wand
3 UMHLANGANO WE-MOTOR XNUMX
- Hlanganisa ukumisa okulungile njengoba kudingeka
- Faka i-motor assembly ku-venetian head rail assembly
- Qinisekisa ukuthi i-tilt rod ihlangene ne-motor
- Isilinganiso esincane sokufakwa kwenduku etshekile ngemoto ngu-1/2”
- Ubukhulu bokufakwa kwenduku etshekile\ enenjini ngu-3/4”
4 UKWENZA IZINGA
4.1 Izinketho zamandla
I-automate DC motor MTDCRF-TILT-1 inikwa amandla kusuka kumthombo wamandla we-12V DC. Amabhande ebhethri e-AA, amaphekhi ebhethri aphinde ashajwe nezinto zikagesi ze-A/C ziyatholakala, nezinhlobonhlobo zezintambo zokuxhuma okusheshayo. Ekufakeni okuphakathi nendawo, uhla lokuphakela amandla lunganwetshwa ngentambo engu-18/2 (ayitholakali nge-Rollease Acmeda).
- Ngesikhathi sokusebenza, uma umthamotage yehla ibe ngaphansi kuka-10V, injini izokhala izikhathi ezingu-10 ukukhombisa inkinga yokunikezwa kwamandla.
- I-Motor izoyeka ukusebenza lapho i-voltagu-e ungaphansi kuka-7V futhi izophinda iqalise uma ivolumutagu-e mkhulu kuno-7.5V.
QAPHELA:
- I-Passthrough Tilt Motor MT01-4001-xxx002 iza ihlinzekwa ngephakethe lebhethri elingashajwa kabusha.
| Ukunikezwa kwamandla kagesi | Ama-Motors ahambisanayo |
| MTBWAND18-25 | Ishubhu yebhethri engu-18/25mm DCRF (ayikho ibhethri) Mtrs (inc Mt clips) |
I-MTDCRF-TILT-1 |
|
MTDCPS-18-25 | Ukunikezwa kwamandla kwe-18/25-CL/Tilt DCRF (akukho Bttry) Mtr |
|
|
MTBPCKR-28 | I-Wand Eshajwa kabusha |
|
| MT03-0301-069011 | I-USB Wall Charger – 5V, 2A (AU KUPHELA) |
MT01-4001-xxx002 |
|
MT03-0301-069008 | I-USB Wall Charger – 5V, 2A (US KUPHELA) |
|
|
MT03-0301-069007 | 4M (13ft) USB Micro Cable |
|
|
MT03-0302-067001 | Iphaneli yeSolar Gen2 |
| Isandiso sezintambo | Iyahambisana |
| I-MTDC-CBLXT6 DC Ikhebuli Yebhethri Yebhethri engu-6” / 155mm |
I-MTDCRF-TILT-1 |
| I-MTDC-CBLXT48 DC Ikhebuli Yebhethri Yebhethri engu-48” / 1220mm | |
| I-MTDC-CBLXT96 DC Ikhebuli Yebhethri Yebhethri engu-96” / 2440mm | |
| MT03-0301-069013 | 48"/1200mm 5V Cable Extender |
MT01-4001-xxx002 |
| MT03-0301-069014 | 8"/210mm 5V Cable Extender | |
| MT03-0301-069 |
Qinisekisa ukuthi ikhebuli igcinwa ingenalutho kwendwangu.
Qinisekisa ukuthi i-antenna igcinwa iqondile futhi ikude nezinto zensimbi.
5.1 Ukuhlolwa kwesimo sezimoto
Leli thebula lichaza umsebenzi wokucindezela/ukukhishwa kwenkinobho ye-P1 emfushane (<2 amasekhondi) kuye ngokucushwa kwemoto yamanje.
| P1
Cindezela |
Isimo | Umsebenzi Uzuziwe | Impendulo Ebonakalayo | Kuyazwakala Impendulo | Umsebenzi Uchaziwe |
|
Cindezela iDemo |
Uma umkhawulo UNGASEthiwe | Lutho | Asikho Isenzo | Lutho | Asikho Isenzo |
|
Uma imikhawulo isethiwe |
Ukulawulwa kokusebenza kwemoto, sebenzisa umkhawulo. Yima uma ugijima |
I-Motor Runs |
Lutho |
Ukulawulwa kokusebenza kwemoto ngemva kokumataniswa nokumiswa komkhawulo kuqedwa okokuqala | |
| Uma injini “Ikumodi Yokulala” futhi imikhawulo isethiwe |
Vuka futhi ulawule |
I-Motor ivuka futhi igijime iqonde khona |
Lutho |
I-Motor ibuyiselwe kokuthi Imodi Yokulala futhi ukulawulwa kwe-RF kuyasebenza |
5.2 Izinketho zokumisa izimoto
Inkinobho ye-P1 isetshenziselwa ukuphatha ukulungiselelwa kwezimoto njengoba kuchazwe ngezansi.
6.1 Bhangqa injini nesilawuli
I-Motor manje ikumodi yesinyathelo futhi isilungele ukubeka imikhawulo
6.2 Hlola indlela yemoto
KUBALULEKILE
Ukulimala komthunzi kungase kwenzeke lapho usebenzisa injini ngaphambi kokubeka imikhawulo. Kufanele kunakwe.
Ukubuyisela emuva isiqondiso se-motor usebenzisa le ndlela kungenzeka kuphela ngesikhathi sokusetha kokuqala.
6.3 Beka Imikhawulo
7.1 Lungisa umkhawulo ophezulu
7.2 Lungisa umkhawulo ophansi
KUBALULEKILE
Umkhawulo ophansi kufanele umiswe ~ 1.38 in. (35mm) ngaphansi kwe-Ultra-Lock ukuze kukhishwe indlela yokukhiya okuzenzakalelayo lapho umthunzi uphakanyiswa.
8 IZILAWULI KANYE NEZINKHISHI
8.1 Ukusebenzisa Inkinobho ye-P2 kusilawuli esikhona ukwengeza isilawuli esisha noma isiteshi
A = Isilawuli esikhona noma isiteshi (ukugcina)
B = Isilawuli noma isiteshi ozosengeza noma usisuse
KUBALULEKILE Bheka imanuwali yomsebenzisi yesilawuli sakho noma inzwa
8.2 Ukusebenzisa isilawuli esivele sikhona ukwengeza noma ukususa isilawuli noma isiteshi
A = Isilawuli esikhona noma isiteshi (ukugcina)
B = Isilawuli noma isiteshi ozosengeza noma usisuse
9 UKUMA OKUTHANDAYO
9.1 Setha indawo oyintandokazi
Hambisa umthunzi endaweni oyifunayo ngokucindezela inkinobho ethi PHEZULU noma PHANSI kusilawuli.
9.2 Thumela umthunzi endaweni oyintandokazi
9.3 Susa indawo oyintandokazi
10.1 Guqula injini uye ku-Tilt Mode
Imodi yemoto ezenzakalelayo i-Roller ngemva kokuthi Imikhawulo yokuqala isethiwe, sebenzisa izinyathelo ezilandelayo ukuze ushintshele ku-Roller Mode.
10.2 Guqula i-Motor ibe yi-Roller Mode
Imodi yemoto ezenzakalelayo i-Roller ngemva kokuthi Imikhawulo yokuqala isethiwe, sebenzisa izinyathelo ezilandelayo ukuze ushintshele ku-Roller Mode.
Uma i-motor iku-Tilt Mode, sebenzisa izinyathelo ezilandelayo ukuze ushintshele ku-Roller Mode.
11 UKULUNGISA ISIVIVINYO
11.1 Khuphula isivinini seMoto
QAPHELA: Iphinda lesi sinyathelo uma ngesivinini esisheshayo NGENA Imodi Yokumisa Ethambile ku-MT01-4001-069001.
11.2 Yehlisa isivinini seMoto
QAPHELA: Iphinda lesi sinyathelo uma ngesivinini esincane kakhulu IPHUMA Kumodi Ethambile Yokumisa ku-MT01-4001-069001.
12 . INDLELA YOKULALA
Uma amamotho amaningi eqoqwe esiteshini esisodwa, Imodi Yokulala ingase isetshenziselwe ukubeka yonke imoto ngaphandle kwe-1 ukulala,
okuvumela ukuhlelwa kwenjini eyodwa kuphela esele "Iphapheme". Bheka ikhasi 6 ukuze uthole okuningiliziwe kwemisebenzi ye-P1.
Faka Imodi Yokulala
Imodi yokulala isetshenziselwa ukuvimbela injini ekumisweni okungalungile ngesikhathi sokunye ukusethwa kwemoto. Bamba inkinobho ethi P1 ekhanda lemoto
Phuma Kumodi Yokulala: Indlela yoku-1
Phuma kumodi yokulala uma umthunzi usulungile.
Cindezela bese ukhulula inkinobho ethi P1 ekhanda lemoto
Phuma Kumodi Yokulala: Indlela yoku-2
Khipha amandla bese unika amandla kabusha injini.
13 INKINGA SHOOTINGG
| Inkinga | Imbangela | Ikhambi |
| IMotor ayiphenduli | Ibhethri kumotha liphelile | Shaja kabusha ngeshaja ehambisanayo |
| Ukushaja okunganele kwephaneli ye-solar PV | Hlola ukuxhumeka nokuma kwephaneli ye-PV | |
| Ibhethri yesilawuli isiphelile | Shintsha ibhethri | |
| Ibhethri ifakwe ngokungalungile kusilawuli | Hlola i-polarity yebhethri | |
| Ukuphazamiseka/ukuvikela umsakazo | Qinisekisa ukuthi i-transmitter ibekwe kude nezinto zensimbi futhi i-aerial kumotho noma isamukeli igcinwa iqondile futhi ikude nensimbi. | |
| Ibanga lomamukeli likude kakhulu nesithumeli | Hambisa isidluliseli endaweni eseduze | |
| Ukushaja kuhlulekile | Hlola ukuthi ukunikezwa kwamandla kumotho kuxhunyiwe futhi kuyasebenza | |
| I-Motor beeps x10 uma isetshenziswa | Ibhethri voltage iphansi | Shaja kabusha ngeshaja ehambisanayo |
| Ayikwazi ukuhlela injini eyodwa (izinjini eziningi ziyaphendula) | Amamotho amaningi abhangqwe esiteshini esifanayo | Hlala ugcina isiteshi esisodwa ukuze wenze imisebenzi yokuhlela. Sebenzisa Imodi Yokulala ukuze uhlele izinjini ngazinye. |
Funda okwengeziwe ngale Manuwali & Landa i-PDF:
Amadokhumenti / Izinsiza
 |
I-Automate Core Tilt Motor [pdf] Imaniwali yosebenzisayo I-Automate, i-Automate, i-Core Tilt Motor |
