KC5 Series Android Kiosk Computer
“
Product Specifications
- Manufacturer: Zebra Technologies Corporation
- Model Numbers: All Zebra devices
- Compliance: Designed to meet regulatory rules and
regulations - Power Options: External power supply or Power over Ethernet
(PoE) 802.3af or 802.3at - Approved Accessories: Zebra tested and approved
accessories
Product Usage Instructions
Regulatory Information
Ensure compliance with regulations and use only approved
accessories. Do not charge damp/wet devices.
Regulatory Markings
Check the device for regulatory markings and refer to the
Declaration of Conformity for details.
Health and Safety Recommendations
Follow ergonomic workplace practices to prevent injury. Consult
with your Health and Safety Manager.
RF Exposure Guidelines
Only operate the device as per supplied instructions. Use Zebra
approved accessories for RF exposure compliance.
Power Supply
Use only Zebra-approved power supplies to prevent electrical
shock. Follow applicable instructions for power sources.
Frequently Asked Questions (FAQ)
Q: Can I use third-party accessories with the device?
A: It is recommended to use only Zebra tested and approved
accessories to ensure RF exposure compliance and safety.
Q: What should I do if the device gets wet?
A: Do NOT attempt to charge damp/wet mobile computers, printers,
or batteries. Ensure all components are dry before connecting to a
power source.
“`
Regulatory Information
This device is approved under Zebra Technologies Corporation.
This guide applies to the following model numbers:
· KC50A15
· KC50E15
· KC50A22
· KC50E22
All Zebra devices are designed to be compliant with the rules and regulations in the locations they are sold and will be labeled as required.
Local language translation / (BG) / (CZ) Peklad do místního jazyka / (DE) Übersetzung in die Landessprache / (EL) / (ES) Traducción de idiomas locales / (ET) Kohaliku keele tõlge / (FI) Paikallinen käännös / (FR) Traduction en langue locale / (HR) Prijevod na lokalni jezik / (HU) Helyi nyelv fordítás / (IT) Traduzione in lingua locale / (JA) / (KR) / (LT) Vietins kalbos vertimas / (LV) Tulkojums vietjvalod / (NL) Vertaling in lokale taal / (PL) Tlumaczenie na jzyk lokalny / (PT) Tradução do idioma local / (RO) Traducere în limba local / (RU) / (SK) Preklad do miestneho jazyka / (SL) Prevajanje v lokalni jezik / (SR) / (SV) Översättning av lokalt språk / (TR) Yerel dil çevirisi / (ZH-CN) / (ZH-TW) zebra.com/support
Any changes or modifications to Zebra equipment not expressly approved by Zebra could void the user’s authority to operate the equipment.
Declared maximum operating temperature: 40°C
CAUTION: Only use Zebra approved and NRTL-certified accessories, battery packs, and battery chargers. Do NOT attempt to charge damp/wet mobile computers, printers or batteries. All components must be dry before connecting to an external power source.
Bluetooth® Wireless Technology
This is an approved Bluetooth® product. For more information on the Bluetooth SIG listing, please visit bluetooth.com.
Regulatory Markings
Regulatory markings subject to certification are applied to the device. Refer to the Declaration of Conformity (DoC) for details of other country markings. The DOC is available at: zebra.com/doc.
The regulatory marks specific to this device (including FCC and ISED) are available on the screen of the device by following these instructions:
Go to Settings > Regulatory.
· Read these instructions carefully.
· Keep these instructions for later reference.
· All cautions and warnings should be followed.
· For indoor use only.
· For use with ITE information technology equipment.
· Do not defeat the safety purpose of grounding type plug. Use the supplied power supply cord only in combination with an earthed socket outlet.
· The socket outlet should be located near the equipment and be easily accessible.
· Protect the power cord from being walked on or pinched. · Users should not open the equipment due to the risk of electrical
shock.
· Protect equipment from humidity. · Disconnect equipment from socket outlet before cleaning. Do not
use any liquid or aerosol cleaner. Use only a dampened cloth.
· Equipment should be placed on a reliable surface. A drop or fall could cause damage.
· If the equipment is not used for long time, disconnect the equipment from socket outlet to avoid being damaged by voltage transients.
· The maximum operating altitude is 5000m. · An approved power cord greater or equal to H03VV-F, 3G,
0.75mm2 must be used.
· Product information for COMMISSION REGULATION (EU 2019/1782):
Information published
· Manufacturer HUIZHOU SANHUA INDUSTRIAL CO., LTD. ZONE 14, Huizhou Zhongkai Hi-Tech Development Zone, Huizhou, Guangdong 516001, P.R. China.
· model PS000088A01 · Input voltage 100-240V AC · Input AC frequency 50-60Hz · Output voltage 24V · Output current 3.25 A · Output power 78W · Average active efficiency 88% · Efficiency at low load (10%) 80% · No-load power consumption 0.21W
Health and Safety Recommendations
Ergonomic Recommendations
In order to avoid or minimize the potential risk of ergonomic injury, always follow good ergonomic workplace practices. Consult with your local Health and Safety Manager to ensure that you are adhering to your company’s safety programs to prevent employee injury.
RF Exposure Guidelines
Safety Information
Reducing RF Exposure Use Properly
Only operate the device in accordance with the instructions supplied. The device complies with internationally recognized standards covering human exposure to electromagnetic fields. For information on international human exposure to electromagnetic fields, refer to the Zebra Declaration of Conformity (DoC) at zebra.com/doc.
Use only Zebra tested and approved headset, belt-clips, holsters, and similar accessories to ensure RF exposure compliance. If applicable, follow the instructions for use as detailed in the accessory guide.
The use of third-party belt clips, holsters, and similar accessories may not comply with RF exposure compliance requirements and should be avoided.
For further information on the safety of RF energy from wireless devices, refer to RF exposure and assessment standards section at zebra.com/responsibility.
To satisfy RF exposure requirements, this device must be touched with fingertips only and, where applicable, use only with Zebra tested and approved accessories.
Power Supply
KC50A22/KC50A15 only: This device may be powered by either an external power supply or Power over Ethernet (PoE) 802.3af or 802.3at power source. Ensure the applicable instructions are followed.
WARNING ELECTRICAL SHOCK: Use only a Zebra approved, Certified ITE [LPS] power supply with appropriate electrical ratings. Use of alternative power supply will invalidate any approvals given to this unit and may be dangerous.
Marking and European Economic Area (EEA)
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with Directives 2014/53/EU and 2011/65/EU.
Any radio operation limitations within EEA countries are identified in Appendix A of EU Declaration of Conformity. The full text of the EU Declaration of Conformity is available at zebra.com/doc.
Environmental Compliance
For compliance declarations, recycling information, and materials used for products and packaging please visit zebra.com/environment.
EU Importer : Zebra Technologies B.V Address: Mercurius 12, 8448 GX Heerenveen, Netherlands
Waste Electrical and Electronic Equipment (WEEE)
For EU and UK Customers: For products at the end of their life, please refer to recycling/disposal advice at zebra.com/weee.
United States and Canada Regulatory
Radio Frequency Interference Notices
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.
L’exploitation des émetteurs dans la bande de 5,925 à 7,125 GHz est interdite pour le contrôle ou les communications avec les systèmes d’aéronefs sans pilote.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
·Reorient or relocate the receiving antenna.
·Increase the separation between the equipment and receiver.
·Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
·Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements Canada
Innovation, Science and Economic Development Canada ICES-003 Compliance Label: CAN ICES-003 (B)/NMB-003(B)
This device complies with Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
L’émetteur/récepteur exempt de licence contenu dans le présent appareil est conforme aux CNR d’Innovation, Sciences et Développement économique Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radio électrique subi même si le brouillage est susceptible d’en compromettre le fonctionnement.
This device is restricted to indoor use when operating in the 5150 to 5350 MHz frequency range.
Lorsqu’il fonctionne dans la plage de fréquences 5 150- 5350 MHz, cet appareil doit être utilisé exclusivement en extérieur.
RF Exposure Requirements – FCC and ISED
The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated in compliance with the FCC RF emission guidelines. SAR information on this device is on file with the FCC and can be found under the Display Grant section of fcc.gov/oet/ea/fccid.
To satisfy RF exposure requirements, this device must be touched with fingertips only and, where applicable, used only with Zebra-tested and approved accessories.
Co-located Statement
To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be co-located (within 20 cm) or operating in conjunction with any other transmitter/antenna except those already approved in this filling.
France
Cet appareil a été testé et déclaré conforme aux limites applicables d’exposition aux radiofréquences (RF).
Le débit d’absorption spécifique (DAS) local quantifie l’exposition de l’utilisateur aux ondes électromagnétiques de l’équipement concerné.
Les valeurs SAR les plus élevées sont disponibles sur la déclaration de conformité (DoC) disponible sur: zebra.com/doc
/ 9 13
KC50E22
X
O
O
O
O
O
X
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
O
1. 0.1 wt % 0.01 wt %
2. O
3. – Note 1: “Exceeding 0.1 wt%” and “exceeding 0.01 wt%” indicate that the percentage content of the restricted substance exceeds the reference percentage value of presence condition. Note 2: “O” indicates that the percentage content of the restricted substance does not exceed the percentage of reference value of presence. Note 3: The ” – ” indicates that the restricted substance corresponds to the exemption.
Türkiye
TÜRK WEEE Uyumluluk Beyani
EEE Yönetmeliine Uygundur.
United Kingdom
Statement of Compliance
Zebra hereby declares that this radio equipment is in compliance with the Radio Equipment Regulations 2017 and the Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012.
Any radio operation limitations within UK are identified in Appendix A of UK Declaration of Conformity.
The full text of the UK Declaration of Conformity is available at: zebra.com/doc.
UK Importer: Zebra Technologies Europe Limited Address: Dukes Meadow, Millboard Rd, Bourne End, Buckinghamshire, SL8 5XF
Warranty
For the complete Zebra hardware product warranty statement, go to: zebra.com/warranty.
Service Information
Before you use the unit, it must be configured to operate in your facility’s network and run your applications.
If you have a problem running your unit or using your equipment, contact your facility’s Technical or System Support. If there is a problem with the equipment, they will contact Zebra support at zebra.com/support.
For the latest version of the guide go to: zebra.com/support.
Software Support
Zebra wants to ensure that customers have the latest entitled software at the time of device purchase in order to keep the device operating at peak performance levels. To confirm that your Zebra device has the latest entitled software available at the time of purchase, go to zebra.com/support.
Check for the latest software from Support > Products, or search for the device and select Support > Software Downloads.
If your device does not have the latest entitled software as of your device purchase date, e-mail Zebra at entitlementservices@zebra.com and ensure you include the following essential device information:
· Model number · Serial number · Proof of purchase · Title of the software download you are requesting. If it is determined by Zebra that your device is entitled to the latest version of software, as of the date you purchased your device, you will receive an e-mail containing a link directing you to a Zebra Web site to download the appropriate software.
Product Support Information
· For information on using this product, see the User Guide at zebra.com/zebra-kiosk-system.
· To find quick answers to known product behaviors, access our knowledge articles at supportcommunity.zebra.com/s/knowledge-base.
· Ask your questions in our Support community at supportcommunity.zebra.com.
· Download product manuals, drivers, software, and view how-to videos at zebra.com/support.
· To request a repair for your product, go to zebra.com/repair.
Patent Information
To view Zebra patents, go to ip.zebra.com.
KC50E22/KC5 0E15/KC50A22 /KC50A15
Regulatory Guide
MN-004997-01EN-P — 2024
Zebra Technologies | 3 Overlook Point | Lincolnshire, IL 60069 USA zebra.com ZEBRA and the stylized Zebra head are trademarks of Zebra Technologies Corp., registered in many jurisdictions worldwide. All other trademarks are the property of their respective owners. © 2024 Zebra Technologies Corp. and/or its affiliates. All rights reserved.
Documents / Resources
 |
ZEBRA KC5 Series Android Kiosk Computer [pdf] Instruction Manual KC50A15, UZ7KC50A15, KC5 Series Android Kiosk Computer, KC5 Series, Android Kiosk Computer, Kiosk Computer, Computer |
 |
ZEBRA KC5 Series Android Kiosk Computer [pdf] User Guide KC50E15, UZ7KC50E15, KC5 Series Android Kiosk Computer, Android Kiosk Computer, Kiosk Computer, Computer |