inELs RFSAI Uluhlu lweYunithi yokuTshintsha kunye neNgeniso yeQhosha langaphandle

Tshintsha iyunithi ngegalelo langaphandle iqhosha

Iimpawu

•  Icandelo lokutshintsha kunye nenye / ezimbini zokuthunyelwa kweemveliso zisetyenziselwa ukulawula izixhobo kunye nezibane. Ukutshintsha / amaqhosha aqhagamshelwe kwi-wiring angasetyenziselwa ukulawula.
•  Zinokudityaniswa ne-Detectors, Controllers okanye iNELS RF Control System Components.
•  Iinguqulelo ze-BOX zifakwe ngqo kwibhokisi yofakelo, isilingi okanye isigqubuthelo sesixhobo sombane esilawulwayo. Ufakelo olulula enkosi kwiitheminali ezingenazikrufu.
•  Ivumela uxhulumaniso lwemithwalo etshintshiweyo kunye nenani elipheleleyo le-8 A (2000 W).
•  Imisebenzi: ye-RFSAI 61B-SL kunye ne-RFSAI 62B-SL - i-pushbutton, i-impulse relay, kunye nemisebenzi yexesha lokulibaziseka kokuqala okanye ukubuya kunye nexesha lokumisela i-2 s-60 min. Nawuphi na umsebenzi unokwabelwa kwisiphumo sokhutshelo ngalunye. Kwi-RFSAI-11B-SL, iqhosha linomsebenzi osisigxina - ON / OFF.
•  Iqhosha langaphandle linikezelwe ngendlela efanayo ne-wireless.
•  Isiphumo ngasinye sinokulawulwa ukuya kuthi ga kwi-12/12 iziteshi (i-channel ye-1 imele iqhosha elinye kumlawuli). Ukuya kuthi ga kwi-25 iziteshi ze-RFSAI-61B-SL kunye ne-RFSAI-11B-SL.
•  Iqhosha lokucwangcisa kwicandelo likwasebenza njengolawulo lwemveliso yencwadi.
•  Ukubanakho ukuseta imemori yemo yemveliso kwimeko yokusilela kunye nokubuyisela amandla okulandela.
•  Izinto eziphindayo zinokusetwa kumacandelo nge-RFAF / isixhobo senkonzo ye-USB, iPC, okanye usetyenziso.
•  Uluhlu oluya kuthi ga kwi-200 m (ngaphandle), xa kukho ukusilela komqondiso phakathi komlawuli kunye nesixhobo, sebenzisa iRFRP-20 ephindaphinda umqondiso okanye inxalenye yeRFIO2 protocol exhasa lo msebenzi.
•  Unxibelelwano kunye ne-bidirectional RFIO2 protocol.
•  Izinto zoqhagamshelwano ze-AgSnO2 relay yenza ukutshintshwa kweebhola ezikhanyayo.

INdibano

ukunyuka kwibhokisi yofako /(naphantsi kweqhosha elikhoyo/ukutshintsha)

ukunyuselwa kwisilingi yesigqubuthelo esikhanyayo

Uqhagamshelwano

Iitheminali ezingenasikru

Ukungena kwesignali yeRadiyo ngokusebenzisa izixhobo ezahlukeneyo zokwakha

isalathisi, ulawulo lwezandla

1. Iqhosha le-LED / PROG
   •  I-LED eluhlaza ye-V1-imeko yesixhobo isalathiso semveliso 1
   •  I-LED ebomvu ye-V2 - isalathisi sesimo sesixhobo semveliso 2. Iimpawu zomsebenzi wememori:
     • Vula – I-LED idanyaza x 3.
     • Valiwe - I-LED ilayita kube kanye ngexesha elide.
2.  Ibhloko yetheminali - uqhagamshelo lweqhosha langaphandle
3.  Ibhloko yetheminali - ukudibanisa umqhubi ongathathi hlangothi
4.  Uqhagamshelo lwebhloko yomthwalo wetheminali kunye nesixa setotali ye-8A yangoku (umz. V1=6A, V2=2A)
5.  Ibhloko yetheminali yokudibanisa umqhubi wesigaba

Kwinkqubo yokucwangcisa kunye nokusebenza, i-LED kwicandelo ikhanyisa ngexesha elifanayo rhoqo iqhosha licinezelwe - oku kubonisa umyalelo ongenayo. I-RFSAI-61B-SL: isiphumo esisodwa soqhagamshelwano, isibonakaliso sesimo nge-LED ebomvu

Ukuhambelana

Isixhobo sinokudityaniswa nawo onke amalungu enkqubo, ulawulo, kunye nezixhobo ze-iNELS RF Control kunye neNELS RF Control2. Umtshina unokwabelwa inkqubo yonxibelelwano ye-iNELS RF Control2 (RFIO2).

Ukukhetha umjelo

Ukukhethwa kwesiteshi (RFSAI-62B-SL) kwenziwa ngokucinezela amaqhosha e-PROG kwi-1-3s. RFSAI-61B-SL: cinezela ngaphezu kwe-1 yesibini. Emva kokukhutshwa kweqhosha, i-LED iyadanyaza ibonisa itshaneli ephumayo: ebomvu (1) okanye eluhlaza (2). Zonke ezinye iimpawu ziboniswa ngumbala ohambelanayo we-LED kwitshaneli nganye.

Imisebenzi kunye neprogram kunye nee-RF transmitters

Iqhosha lomsebenzi

Uqhagamshelwano oluphumayo luya kuvalwa ngokucinezela iqhosha kwaye livulwe ngokukhulula iqhosha. Ukuphunyezwa ngokuchanekileyo kwemiyalelo yomntu ngamnye (cinezela = ukuvala / ukukhulula iqhosha = ukuvula), ukulibaziseka kwexesha phakathi kwale miyalelo kufuneka kube yimizuzu. 1s (cofa - ukulibazisa 1s - ukukhululwa).

Ukucwangcisa

1. Ukucofa iqhosha leprogram kumamkeli we-RFSAI-62B kwi-3-5 s (RFSAI-61B-SL: cinezela ngaphezu kwe-1 s) iya kusebenzisa ummkeli RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.
2. Khetha kwaye ucinezele iqhosha elinye kwiswitshi engenazingcingo, kweli qhosha lizakwabelwa iQhosha lomsebenzi.
3. Cofa iqhosha lokucwangcisa kumamkeli weRFSAI-62B omfutshane kunomzuzwana omnye uyakugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Umsebenzi wokutshintsha uvuliwe

Uqhagamshelwano lwemveliso luya kuvalwa ngokucofa iqhosha.

Ukucwangcisa

1. Ukucofa iqhosha leprogram kumamkeli we-RFSAI-62B kwi-3-5 s (RF-SAI-11B-SL: cofa ngaphezulu kwe-1s) kuya kusebenzisa ummkeli we-RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.
2. Ukucofa kabini kweqhosha lakho elikhethiweyo kwi-RF isidluliseli sabela isitshixo somsebenzi sivuliwe (kufuneka kube lixesha le-1s phakathi koxinzelelo lomntu ngamnye).
3. Ukucofa iqhosha lenkqubo kumamkeli we-RFSAI-62B omfutshane kunomzuzwana omnye uya kugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Ukucima umsebenzi
Inkcazo yokucima

Uqhagamshelwano lwemveliso luya kuvulwa ngokucinezela iqhosha.

1. Cinezela iqhosha lokucwangcisa kumamkeli RFSAI-62B kwi-3-5 s (RF-SAI-61B-SL: cofa ngaphezulu kwe-1 s) iya kusebenzisa ummkeli RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.
2. Ukucofa okuthathu kweqhosha lakho elikhethiweyo kwi-RF transmitter yabela umsebenzi wokucima ukucima (kufuneka kube lixesha le-1s phakathi koxinzelelo lomntu ngamnye).
3. Ukucofa iqhosha lenkqubo kumamkeli we-RFSAI-62B omfutshane kunomzuzwana omnye uya kugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Inkcazo ye-impulse relay

1. Uqhagamshelwano oluphumayo luya kutshintshelwa kwindawo echaseneyo ngokucofa ngalunye kweqhosha. Ukuba umfowunelwa wayevaliwe, uya kuvulwa kwaye vice versa.
2. Ukucofa iqhosha leprogram kumamkeli we-RFSAI-62B kwi-3-5 s (RFSAI-61B-SL: cinezela ngaphezu kwe-1 s) iya kusebenzisa ummkeli RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.
3. Ukucofa okune kweqhosha lakho elikhethiweyo kwi-RF transmitter njenge-signer i-function impulse relay (kufuneka ibe yi-1s phakathi koxinzelelo lomntu).
4. Ukucofa iqhosha lenkqubo kumamkeli we-RFSAI-62B omfutshane kunomzuzwana omnye uya kugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Inkcazo yokulibaziseka
Uqhagamshelwano oluphumayo luya kuvalwa ngokucinezela iqhosha kwaye livulwe emva kokuba ixesha elibekiweyo lidlulile.

1. Ukucofa iqhosha leprogram kumamkeli we-RFSAI-62B kwi-3-5 s (RF-SAI-61B-SL: cinezela ngaphezu kwe-1 s) iya kusebenzisa ummkeli RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.
2. Ukwabelwa komsebenzi olibazisekileyo kwenziwa ngokucofa kahlanu kweqhosha elikhethiweyo kwi-RF transmitter (kufuneka ibe yi-1s phakathi koxinzelelo lomntu ngamnye).
3. Ukucofa iqhosha lokucwangcisa ixesha elide kunemizuzwana emi-5, kuya kwenza i-activator ibe kwimowudi yexesha. Izibane ze-LED 2x kwisithuba ngasinye se-1s. Ekukhululeni iqhosha, ixesha lokubuya elibazisekileyo liqala ukubala.
4. Emva kokuba ixesha elifunekayo lidlulile (uluhlu lwe-2s…60min), imowudi yexesha iphetha ngokucofa iqhosha kwi-RF transmitter, apho umsebenzi wokubuyisela ulibazisekile wabelwe khona. Oku kugcina isithuba sexesha elimisiweyo kwinkumbulo ye actuator.
5. Ukucofa iqhosha lenkqubo kumamkeli we-RFSAI-62B omfutshane kunomzuzwana omnye uya kugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Umsebenzi ulibazisekile

Uqhagamshelwano oluphumayo luya kuvulwa ngokucinezela iqhosha kwaye luvalwe emva kokuba ixesha elibekiweyo lidlulile.

1. Cinezela iqhosha lokucwangcisa kumamkeli RFSAI-62B kwi-3-5 s (RF-SAI-61B-SL: cofa ngaphezulu kwe-1s) iya kusebenzisa ummkeli RFSAI-62B kwimowudi yokucwangcisa. I-LED iyadanya kwisithuba se-1s
2. Isabelo sokulibaziseka kumsebenzi wenziwa ngokucofa amaqhosha amathandathu kwiqhosha elikhethiweyo kwi-RF transmitter (kufuneka ibe yi-1s phakathi kocinezelo lomntu ngamnye).
3. Ukucofa iqhosha lokucwangcisa ixesha elide kunemizuzwana emi-5 kuya kwenza i-actuator ibe kwimowudi yexesha. Izibane ze-LED 2x kwisithuba ngasinye se-1s. Ekukhululeni iqhosha, ixesha lokubuya elibazisekileyo liqala ukubala.
4. Emva kokuba ixesha elifunekayo lidlulile (uluhlu lwe-2s…60min), imowudi yexesha iphetha ngokucofa iqhosha kwi-RF transmitter, apho umsebenzi wokubuyisela ulibazisekile wabelwe khona. Oku kugcina isithuba sexesha elimisiweyo kwinkumbulo ye actuator.
5. Ukucofa iqhosha lenkqubo kumamkeli we-RFSAI-62B omfutshane kunomzuzwana omnye uya kugqiba imo yenkqubo. I-LED ikhanyisa ngokomsebenzi wememori osetwe kwangaphambili.

Ukucwangcisa ngeeyunithi zolawulo lweRF

Iidilesi ezidweliswe kwicala elingaphambili le-actuator zisetyenziselwa ukucwangcisa kunye nokulawula i-actuator kunye nemijelo ye-RF nganye ngeeyunithi zolawulo.

Cima i-activator

Ukucofa iqhosha leprogram kumamkeli we-RFSAI-62B kwi-3-5 imizuzwana (RFSAI-61B-SL: cofa i-1 isekhondi) iya kusebenzisa ummkeli we-RFSAI-62B kwimodi yokucwangcisa. I-LED idanyaza ngezithuba ze-1s.

Ukucofa iqhosha lokucwangcisa kwi-RFSAI-62B umamkeli ngaphantsi kwesekhondi eli-1 liya kugqiba imo yenkqubo, oku kuya kubuyisela umva umsebenzi wememori. I-LED ikhanyisa ngokomsebenzi wangoku wememori osetwe kwangaphambili. Umsebenzi wememori oseti uyagcinwa. Lonke olunye utshintsho lwenziwa ngendlela efanayo.

•  Umsebenzi wenkumbulo uvuliwe
  Imisebenzi ye-1-4, isetyenziselwa ukugcina imo yokugqibela yokukhutshwa kwe-relay phambi kokunikezelwa kwevolthitage yehla, utshintsho lwemeko yemveliso kwimemori irekhodwa imizuzwana eyi-15 emva kotshintsho.
•  Kwimisebenzi ye-5-6, imeko ekujoliswe kuyo ye-relay ifakwe ngokukhawuleza kwimemori emva kokulibaziseka, kwaye emva kokudibanisa kwakhona amandla, i-relay imiselwe kwimeko ekujoliswe kuyo.
•  Umsebenzi wememori ucimile
• Xa unikezelo lwamandla luxhunywa kwakhona, i-relay ihlala ivaliwe.

Iqhosha langaphandle i-RFSAI-62B-SL icwangciswe ngendlela efanayo neye-wireless. I-RFSAI-11B-SL ayicwangciswanga, inomsebenzi osisigxina.

Iiparamitha zobugcisa

Ukubonelela ngevoltage:	Napájecí napětí:	230 V AC
Ukubonelela ngevoltage frequency:	UFrekvence uthi:	50-60 Hz
Igalelo elibonakalayo:	Uluhlu olulula:	7 VA / cos φ = 0.1
Amandla alahliweyo:	Inqaku elilandelayo:	0.7 W
Ukubonelela ngevoltagukunyamezela:	Ukunyamezelana napájecího napětí:	+10%; -15 %
Isiphumo	Phuma
Inani labafowunelwa:	Nceda uqhagamshelane:	1x ukutshintsha / 1x spínací		2xswitching/ 2xspínací
Ikalwe ngoku:	UJmenovitý unebhongo:	8 A / AC1
Ukutshintsha amandla:	Inqaku elilandelayo:	2000 VA / AC1
Incopho yangoku:	Špičkový proud:	10 A / <3 s
Ukutshintsha umqulutage:	Napínané napětí:	250 V AC1
Ubomi benkonzo yoomatshini:	Uluhlu lweMechanická:	1×107
Ubomi benkonzo yombane (AC1):	I-Elektrická životnost (AC1):	1×105
Ulawulo	Ovládání
Wireless:	Bezdrátově:	Iitshaneli ezingama-25/ 25 kanálů 2 x 12-itshaneli/ 2 x 12 kanály
Inani lemisebenzi:	Inqaku elilandelayo:	1	6	6
Iprothokholi yonxibelelwano:	Iprotokol yeKomunikační:	RFIO2
Ukuphindaphinda:	Frekvence:	866–922 MHz (ukufumana ulwazi oluthe kratya jonga iphe. 74)/ 866–922 MHz (oko kukuthi str. 74)
Umsebenzi ophindayo:	Funkce ophinda:	ewe/ hayi
Ulawulo lwezandla:	Uluhlu olubanzi:	iqhosha INKQUBO (ON/OFF)/ tlačítko PROG (ON/OFF)
Iqhosha langaphandle / tshintsha: Uluhlu:	Uluhlu lwangaphandle:	ewe/ hayi
Enye idatha	I-Dosah:	kwindawo evulekileyo ukuya kuthi ga kwi-200 m/ na volném prostranství až 200 m
Ubushushu bokusebenza:	Další údaje
Indawo yokusebenza:	Inqaku elilandelayo:	-15 až + 50 °C
Indawo yokusebenza:	Inqaku elilandelayo:	nayiphi na/ libovolná
Ukunyuswa:	Uphevnění:	simahla kwiingcingo zokukhokela/ volné na přívodních vodičích
Ukhuseleko:	Krytí:	IP40
Ukugqithisatagudidi lwe-e:	Udidi lwePřepětí:	III.
Iqondo losulelo:	Stupeň znečištění:	2
Umdibaniso:	Umdibaniso:	izikrufu iitheminali/ bezšroubové svorky
Umnxibelelanisi oqhagamshelayo:	I-Průřez připojovacích vodičů (mm2)	0.2-1.5 mm2 okuqinileyo/okubhetyebhetye/ 0.2-1.5 mm2 pevný/pružný
Imilinganiselo:	I-Rozměr:	43 x 44 x 22 mm
Ubunzima:	Hmotnost:	31g		45 g
Imigangatho eyeleleneyo:	I-Související eqhelekileyo:	EN 60730, EN 63044, EN 300 220, EN 301 489

Igalelo leqhosha lokulawula likwivolthi yonikezelotage ezinokubakho.

Ingqalelo
Xa ufaka iNELS RF Control system, kufuneka ugcine umgama omncinci we-1 cm phakathi kweyunithi nganye. Phakathi kwemiyalelo yomntu ngamnye kufuneka kubekho ikhefu ubuncinane eli-1.

Isilumkiso

Incwadi yemiyalelo yenzelwe ukunyuswa kunye nomsebenzisi wesixhobo. Ihlala iyinxalenye yokupakishwa kwayo. Ufakelo kunye noqhagamshelo lunokwenziwa kuphela ngumntu onesiqinisekiso esifanelekileyo sobuchule ekuqondeni le ncwadana yomyalelo kunye nemisebenzi yesixhobo, kwaye ngelixa eqwalasela yonke imimiselo esebenzayo. Umsebenzi ongenazinkathazo wesixhobo ukwaxhomekeke ekuthuthweni, ekugcinweni nasekuphathweni. Kwimeko apho ubona naluphi na uphawu lomonakalo, ukuguqulwa, ukungasebenzi okanye inxalenye elahlekileyo, musa ukufaka esi sixhobo kwaye usibuyisele kumthengisi waso. Kuyimfuneko ukuphatha le mveliso kunye namalungu ayo njengenkunkuma yombane emva kokuba ubomi bayo buphelisiwe.

Ngaphambi kokuba uqalise ukufakela, qiniseka ukuba zonke iingcingo, iindawo eziqhagamshelweyo okanye iitheminali zicinywe amandla. Ngelixa unyuswa kwaye unikezela ngenkonzo jonga imimiselo yokhuseleko, izithethe, izikhokelo, kunye nobuchwephesha, kunye nemimiselo yokuthumela ngaphandle yokusebenza ngezixhobo zombane. Sukuchukumisa iinxalenye zesixhobo esinamandla - isoyikiso lobomi. Ngenxa yokuhanjiswa komqondiso weRF, jonga indawo echanekileyo yezixhobo zeRF kwisakhiwo apho kufakelo kwenzelwa khona. Ulawulo lweRF lwenzelwe kuphela ukunyuswa ngaphakathi. Izixhobo azikhethelwanga ukufakela ngaphandle kunye neendawo ezifumileyo. Akufunekanga zifakwe kwiibhodi zokutshintshela zentsimbi nakwiibhodi zokutshintsha zeplastiki ezineengcango zentsimbi - ukuhanjiswa komqondiso weRF ke akunakwenzeka. Ulawulo lwe-RF alukhuthazwa kwiipuli njl.njl. – isiginali yerediyo yerediyo inokukhuselwa sisithintelo, uphazamiseko, ibhetri ye-transceiver inokubhabha, njl. njl., kwaye ngaloo ndlela uvale isilawuli kude.

I-ELKO EP ibhengeza ukuba uhlobo lwe-RFSAI-xxB-SL lwezixhobo luhambelana neZikhokelo ze-2014/53/EU, 2011/65/EU, 2015/863/EU kunye ne-2014/35/EU. Isibhengezo esipheleleyo se-EU sokuThotyelwa koku:

• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-11b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—-rfsai-61b-sl
• https://www.elkoep.com/switching-units-with-inputs-for-external-buttons—rfsai-62b-sl
• ELKO EP, sro, Palackého 493, 769 01 Holešov, Všetuly, Czech Republic
• Umnxeba: +420 573 514 211, i-imeyile: elko@elkoep.com, www.elkoep.com

Amaxwebhu / Izibonelelo

inELs RFSAI Uluhlu lweYunithi yokuTshintsha kunye neNgeniso yeQhosha langaphandle [pdf] Incwadi Yomyalelo RFSAI-62B-SL, RFSAI-61B-SL, RFSAI-11B-SL, RFSAI Series Tshintsha iYunithi ngeInput for External Button, RFSAI Series, Tshintsha iYunithi ngeInput for External Button, Iyunithi yokuTshintsha, Igalelo leQhosha laNgaphandle, Tshintshela iqhosha langaphandle. Iyunithi, Tshintshela

Iimbekiselo

• Incwadi yokusebenzisa