DFirstCoder BT206 Scanner

Iinkcukacha

• Igama leMveliso: DFirstCoder
• Uhlobo: Intelligent OBDII Coder
• Umsebenzi: Yenza imisebenzi eyahlukeneyo yokuxilonga kunye nekhowudi yezithuthi
• Iimpawu zoKhuseleko: Inika imiyalelo yokhuseleko kunye nezilumkiso zokusetyenziswa ngokufanelekileyo

Imiyalelo yokusetyenziswa kwemveliso

Ukhuseleko:

• Phambi kokusebenzisa i-DFirstCoder, qinisekisa ukuba uyifundile kwaye uyayiqonda yonke ingcaciso yokhuseleko enikwe kwincwadana yemigaqo yomsebenzisi.
• Soloko usebenzisa isixhobo kwindawo engena umoya ukunqanda ukuba sesichengeni kwiigesi eziyingozi zokukhupha.
• Qinisekisa ukuba isithuthi sipakishwe ngokukhuselekileyo kunye nokuhanjiswa kwi-PARK okanye i-NEUTRAL kunye ne-brake yokupaka ifakwe phambi kovavanyo.
• Kuphephe ukudibanisa okanye ukuqhawula nasiphi na isixhobo sovavanyo ngelixa injini ibaleka ukuthintela iingozi.

Imigaqo yokusetyenziswa:

1. Qhagamshela i-DFirstCoder kwizibuko le-OBDII kwisithuthi sakho.
2. Landela imiyalelo esesikrinini ukuze ufikelele kwimisebenzi yoxilongo okanye wenze imisebenzi yekhowudi.
3. Qinisekisa ukuba isixhobo sicinyiwe xa singasetyenziswa ukugcina ubomi bebhetri.
4. Jonga kwizikhokelo zomenzi kwiinkqubo ezithile zovavanyo lwesithuthi.

Ugcino:

• Gcina i-DFirstCoder icocekile kwaye yomile ukukhusela umonakalo kwisixhobo.
• Sebenzisa isepha esithambileyo kwilaphu elicocekileyo ukosula umphandle wesixhobo njengoko kufuneka.

FAQ

• Q: Ndazi njani ukuba i-DFirstCoder iyahambelana nesithuthi sam?
  • A: I-DFirstCoder iyahambelana neenqwelo ezininzi ezihambelana ne-OBDII. Jonga kwincwadi yomsebenzisi ngoluhlu lweemodeli ezixhaswayo okanye uqhagamshelane nenkxaso yabathengi ngoncedo.
• Q: Ndingayisebenzisa i-DFirstCoder kwizithuthi ezininzi?
  • A: Ewe, ungasebenzisa i-DFirstCoder kwizithuthi ezininzi logama nje zihambelana ne-OBDII.
• Q: Ndingenza ntoni xa ndifumana impazamo ngelixa ndisebenzisa i-DFirstCoder?
  • A: Ukuba ufumana imposiso, jonga kwicandelo lokusombulula ingxaki kwincwadi yomsebenzisi ngezisombululo ezinokwenzeka. Ukuba umba uyaqhubeka, qhagamshelana nenkxaso yabathengi ukuze ufumane uncedo olungakumbi.

Ulwazi ngoKhuseleko

• Ukwenzela ukhuseleko lwakho kunye nokhuseleko lwabanye, kunye nokuthintela umonakalo kwisixhobo kunye nezithuthi ekusetyenziswa kuzo, kubalulekile ukuba imiyalelo yokhuseleko echazwe kuyo yonke le ncwadana ifundwe kwaye iqondwe ngabo bonke abantu abasebenza okanye abadibana nayo. isixhobo.
• Kukho iinkqubo ezahlukeneyo, ubuchule, izixhobo, kunye neenxalenye zokulungisa izithuthi, kunye nobuchule bomntu owenza umsebenzi. Ngenxa yobuninzi bezicelo zovavanyo kunye nokwahluka kweemveliso ezinokuvavanywa ngesi sixhobo, asinakukwazi ukulindela okanye ukunika iingcebiso okanye imiyalezo yokhuseleko ukugubungela zonke iimeko.
• Luxanduva lwengcali yeemoto ukuba nolwazi malunga nenkqubo evavanywayo. Kubalulekile ukusebenzisa iindlela ezifanelekileyo zenkonzo kunye neenkqubo zovavanyo. Kubalulekile ukwenza uvavanyo ngendlela efanelekileyo neyamkelekileyo engalubeki engozini ukhuseleko lwakho, ukhuseleko lwabanye abantu kwindawo yokusebenzela, isixhobo esisetyenziswayo, okanye isithuthi esivavanywayo.
• Phambi kokuba usebenzise isixhobo, soloko ubhekisa kwaye ulandele imiyalezo yokhuseleko kunye neenkqubo zovavanyo ezifanelekileyo ezibonelelwa ngumenzi wesithuthi okanye isixhobo esivavanywayo. Sebenzisa isixhobo kuphela njengoko kuchaziwe kule ncwadana. Funda, uqonde, kwaye ulandele yonke imiyalezo yokhuseleko kunye nemiyalelo kule ncwadana.

Imiyalezo yoKhuseleko

• Imiyalezo yokhuseleko inikezelwe ukunceda ukuthintela ukulimala komntu kunye nomonakalo wezixhobo. Yonke imiyalezo yokhuseleko yaziswa ngegama lomqondiso elibonisa inqanaba lengozi.

INGOZI

• Ibonisa imeko eyingozi ekhawulezileyo ethi, ukuba ayiphetshwa, iyakukhokelela ekufeni okanye ukwenzakala okumandundu kumqhubi okanye kwabo babukeleyo.

ISILUMKISO

• Ibonisa imeko enokuba yingozi enokuthi, ukuba ayiphetshwa, ingabangela ukufa okanye ukwenzakala okumandundu kumqhubi okanye kwabo babukeleyo.

Imiyalelo yoKhuseleko

• Imiyalezo yokhuseleko elapha igubungela iimeko uQIXIN uyazi. I-QIXIN ayinakukwazi, ikuvavanya okanye ukukucebisa kuzo zonke iingozi ezinokubakho. Kufuneka uqiniseke ukuba nayiphi na imeko okanye inkqubo yenkonzo odibana nayo ayibeki emngciphekweni ukhuseleko lwakho.

INGOZI

• Xa injini isebenza, gcina indawo yenkonzo IPHEFUMILE KAHLE okanye uqhoboshele isixokelelwano sokukhupha umbhobho wesakhiwo kwisixokelelwano sokukhupha i-injini. Iinjini zivelisa ikharbon monokside, irhasi engenavumba neyityhefu ebangela ukucotha kwexesha lokusabela kwaye inokukhokelela kukwenzakala okumandundu okanye ukuphulukana nobomi.

IZILUMKISO NGOKHUSELEKO

• Soloko usenza uvavanyo lweemoto kwindawo ekhuselekileyo.
• Sebenza isithuthi kwindawo yokusebenza enomoya kakuhle, kuba iigesi zokukhupha zinetyhefu.
• Beka ukuhanjiswa kwi-PARK (yokusasaza ngokuzenzekelayo) okanye i-NEUTRAL (yokuhambisa ngesandla) kwaye uqinisekise ukuba i-brake yokupaka ibandakanyeka.
• Beka iibhloko phambi kwamavili okuqhuba kwaye ungaze usishiye isithuthi singajongwanga ngelixa uvavanywa.
• Musa ukuqhagamshela okanye uqhawule uqhagamshelo nasiphi na isixhobo sovavanyo ngeli lixa kulayitiwe okanye injini isebenza. Gcina izixhobo zovavanyo zomile, zicocekile, zingenaoyile, amanzi okanye igrisi. Sebenzisa isepha esithambileyo kwilaphu elicocekileyo ukucoca umphandle wesixhobo njengoko kuyimfuneko.
• Musa ukuqhuba isithuthi kwaye usebenzise izixhobo zokuvavanya ngaxeshanye. Nakuphi na ukuphazamiseka kunokubangela ingozi.
• Jonga kwincwadana yenkonzo yesithuthi esenziwa inkonzo kwaye uhambelane nazo zonke iinkqubo zokuxilonga kunye nezilumkiso.
• Ukungaphumeleli ukwenza oko kunokubangela ukwenzakala okanye umonakalo kwisixhobo sovavanyo.
• Ukuze ugweme ukulimaza izixhobo zokuvavanya okanye ukuvelisa idatha yobuxoki, qiniseka ukuba ibhetri yesithuthi ihlawuliswe ngokupheleleyo kwaye ukudibanisa kwi-DLC yesithuthi sicocekile kwaye sikhuselekile.

Ukuhambelana

Isithuthi esixhaswa yi-QIXIN sibandakanya i-VAG Group, i-BMW Group kunye ne-Mercedes njl.

Ngezithuthi ezingaphezulu kunye neenkcukacha zeempawu, nceda uye ku dfirstcoder.com/pages/vwfeature okanye ucofe iphepha elithi 'Khetha izithuthi' kwi-DFirstCoder App.

Iimfuno zoguqulelo:

• Ifuna iOS 13.0 okanye kamva
• Ifuna i-Android 5.0 okanye kamva

Intshayelelo ngokubanzi

1. I-Vehicle Data Connector (i-16-pin) - idibanisa isixhobo kwi-16-pin DLC yesithuthi ngokuthe ngqo.
2. I-LED yamandla - ibonisa isimo senkqubo:
   • Luhlaza Oluqinileyo: Izibane eziluhlaza okuqinileyo xa isixhobo siplagiwe kwaye singadityaniswanga nefowuni okanye ithebhulethi yakho;
   • Umbala oluhlaza okwesibhakabhaka: Izibane eziluhlaza okwesibhakabhaka xa ifowuni okanye ithebhulethi yakho iqhagamshelwe kwisixhobo ngeBluetooth.
   • Bulowu obudanyazayo: Ikhanyisa luhlaza xa ifowuni okanye ithebhulethi yakho inxibelelana nesixhobo;
   • Ubomvu Obuqinileyo: Izibane ezibomvu eziqinileyo xa isixhobo sihlaziywa asiphumelelanga, kufuneka uphucule ngenkani kwi-app.

IiNgcaciso zobuGcisa

Igalelo VoltagUluhlu	9V – 16V
Unikezelo lwangoku	I-100mA @ 12V
Imo yokuLala yangoku	I-15mA @ 12V
Unxibelelwano	IBluetooth V5.3
Wireless Ukuphindaphinda	2.4GHz
ITemp yokuSebenza	0℃ ~ 50℃
ITemp yokuGcina	-10℃ ~ 70℃
Imilinganiselo (L * W * H)	57.5mm*48.6mm*22.8mm
Ubunzima	39.8g

Ingqalelo:

• Isixhobo sisebenza kwi-SELV yomthombo wamandla alinganiselweyo kunye nomthamo wegamatage yi 12 V DC. Umqulu owamkelekileyotage uluhlu ukusuka 9 V ukuya 16 V DC.

Ndiyaqalisa

PHAWULA

• Imifanekiso kunye nemifanekiso eboniswe kule ncwadana inokwahluka kancinane kweyona kanye. Ujongano lomsebenzisi lwe-iOS kunye nezixhobo ze-Android zinokwahluka kancinci.
• Khuphela i-DFirstCoder APP (i-iOS kunye ne-Android zombini ziyafumaneka)
• Khangela i “DFirstCoder” in the App Store or in Google Play Store, The DFirstCoder App is FREE to download.

Ngena okanye Bhalisa

• Vula i-DFirstCoder App kwaye ucofe Bhalisa kufutshane nezantsi ekunene kwesikrini.
• Landela imiyalelo ekwisikrini ukuze ugqibezele ubhaliso.
• Ngena ngedilesi ye-imeyile ebhalisiweyo kunye negama lokugqitha.

Qhagamshela isixhobo kwaye ubophe i-VCI

• Qhagamshela isidibanisi sesixhobo kwiSidibaniso seDatha sesithuthi (DLC). (I-DLC yesithuthi ihlala ibekwe ngasentla kweenyawo zomqhubi)
• Vula ukulayita isithuthi ukuya kwi-Key On, i-Engine Off kwindawo. (I-LED kwisixhobo iya kukhanyisa eluhlaza okuqinileyo xa ixhunyiwe)

• Vula i-DFirstCoder APP, cofa iKhaya> Isimo se-VCI, khetha isixhobo sakho kwaye uqhagamshele kuso kwi-APP.
• Emva koxhumo lweBluetooth, linda de kube i-app ifumene i-VIN, ekugqibeleni ibophe i-akhawunti, i-VIN kunye ne-VCI. (Kubasebenzisi abathenga inkonzo epheleleyo yemoto okanye ukubhaliswa konyaka)

Qalisa ukusebenzisa isixhobo sakho

• Iakhawunti ebophelelekileyo kunye nesithuthi sinokufakwa ikhowudi kunye nesixhobo sangoku simahla, ungasebenzisa yonke imisebenzi yesixhobo sakho, njengale: Khubaza i-Auto Start-Stop, Qala oopopayi, Isixhobo, ukutshixa ilogo yesandi njl.

Fumana iNkcazelo yam yoMsebenzi

201BT yethu Tag isixhobo saqinisekiswa yi-Apple Inc. kwaye inika umsebenzi owongezelelweyo "Fumana iMy" (ifumaneka kuphela kwi-iPhone) ngaphandle kwesixhobo esiqhelekileyo se-201BT, umsebenzi "Fumana uMy" yindlela elula kakhulu yokugcina umkhondo wesithuthi sakho, kunye ne-201TB. Tag kungabiwa ukuya kuthi ga kubantu abahlanu, njengosapho kunye nabahlobo bakho, ukuze ukwazi ukulandelela indawo yesithuthi sakho kwimephu nangaliphi na ixesha naphi na.

Masiyongeze i-201BT Yakho Tag kwi Fumana i-App yam

Vula "Fumana i-App yam"> cofa "Yongeza into"> khetha "Enye into exhaswayo"> Yongeza i-201BT yakho Tag isixhobo. Emva kokongeza isixhobo sakho, indawo yaso inokulandelelwa kwaye iboniswe kwimephu yakho. Gcina isixhobo sakho siplagiwe kwizibuko le-OBD yesithuthi sakho, ukuba isithuthi sakho sikufuphi, umsebenzi othi “Fumana eyam” unokubonisa umgama othe ngqo kunye nomkhombandlela wokukhokelela ekuwulandeleni, kwaye ungazicima okanye uzisuse izixhobo zakho nangaliphi na ixesha.

Ukhuseleko lwabucala

Nguwe kuphela kunye nawe ekwabelwana ngazo nabantu abanokulandelela i-201BT yakho Tag indawo. Idatha yendawo kunye nembali ayigcinwanga kwisixhobo, ilawulwa yi-Apple Inc., nabani na akanakuvunyelwa ukuba afikelele kwidatha yakho ukuba awufuni. Xa usebenzisa umsebenzi othi "Fumana uMy", inyathelo ngalinye lifihliwe, ubumfihlo bakho kunye nokhuseleko luhlala lukhuselwe.

IWARANTI NOMGAQO-NKQUBO WOKUBUYISA

Iwaranti

• Enkosi ngomdla wakho kwiimveliso kunye nenkonzo ye-QIXIN. Izixhobo ze-QIXIN zibonelela ngewaranti yeenyanga ezili-12, kwaye ibonelela ngenkonzo yokutshintsha kuphela kubasebenzisi.
• Iwaranti ilungelelanisa kuphela izixhobo ze-QIXIN kwaye isebenza kwiziphene ezingezizo ezomntu kuphela. Ukuba kukho naziphi na iziphene ezingengomntu zomgangatho kwiimveliso ngaphakathi kwexesha lewaranti, abasebenzisi banokukhetha ukutshintsha isixhobo esitsha nge-imeyile (support@dreamautos.net) usishiyele umyalezo.

UMTHETHO WOKUBUYISA

• I-QIXIN inikezela ngeentsuku ze-15 akukho sizathu sokubuyisela umgaqo-nkqubo kubasebenzisi, kodwa iimveliso kufuneka zibe yiphakheji yoqobo kwaye ngaphandle kokusetyenziswa kophawu xa sizifumana.
• Abasebenzisi bangathumela ngeentsuku ze-15 isicelo kwi-'QD Yam'> 'Iinkcukacha ze-Order' ukubuyisela i-QD ukuba ukuphunyezwa akuphumeleli emva koku-odola. Kwaye ukuba abasebenzisi abanelisekanga ngesiphumo sokwenziwa ngempumelelo, kufuneka babuyisele idatha kwaye bangenise isicelo sokubuyisela i-QD ehambelanayo.
  • (PHAWULA: IXESHA LOKUBUYISELWA KUPHELA KUBASEBENZISI ABATHENGA KAHLE ISIXHOBO.)
• Abasebenzisi banokuvula iphakheji ye-hardware ethengwa kwi-intanethi ukuze ihlolwe kodwa ingasetyenziswa. Ngokusekwe kule mfuno, abasebenzisi banako ukufumana akukho sizathu sokubuya phakathi kweentsuku ezili-15, ngokomhla wokuhanjiswa.
• Abasebenzisi banokuphinda bahlaziye i-QD ukuze bavule iimpawu, ukuba abasebenzisi abazange basebenzise i-QD kwiintsuku ze-45, banokufaka isicelo sokubuyisela ukubuyisela ukutshaja kwakhona. (Ukufumana iinkcukacha ezithe vetshe malunga ne-QD, nceda ujonge kwi-DFirstCoder App 'Mine' > 'Malunga ne-QD' okanye webindawo emazantsi ephepha 'levenkile')
• Ukuba abasebenzisi bathenge iphakheji yenkonzo yesithuthi epheleleyo kwaye kufuneka bafake isicelo sokubuya, baya kutsalwa iindleko ezihambelanayo ngenxa yeempawu ezisetyenzisiweyo, ngoko ke intlawulo yokubuyisela iya kulungelelaniswa ngokufanelekileyo. Okanye umsebenzisi unokukhetha ukubuyisela izinto ebezisetyenzisiwe, kulo mzekelo, banokonwabela ukubuya umrhumo opheleleyo wocwangco.
• Asikwazi ukubuyisela impahla okanye ngexesha lokuthumela iindleko ezenziweyo kwi-odolo yabasebenzisi. Nje ukuba abasebenzisi bafake isicelo sokubuya, kufuneka bahlawulele imithwalo ebuyayo kunye nangexesha lokuthuthwa kweendleko ezenziweyo, kwaye umsebenzisi kufuneka abuyisele zonke izinto eziqulethwe yiphakheji.

Qhagamshelana nathi

• Webindawo: www.dfirstcoder.com
• I-imeyile: support@dfirstcoder.com

© Shenzhen QIXIN Technology Corp., Ltd. Onke Amalungelo Agciniwe.

INGXELO yeFCC

IC Isilumkiso:

INkcazelo yeMigangatho yeRadio RSS-Gen, ushicilelo lwesi-5

• Esi sixhobo siqulethe um(aba)thumeli-mvume/abamkeli (aba) abathobela i-Innovation, iNzululwazi kunye noQoqosho.
• Uphuhliso lwelayisenisi yaseKhanada-i-RSS(s). Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:
• Esi sixhobo sisenokungabangeli ukuphazamiseka.
• Esi sixhobo kufuneka samkele naluphi na uphazamiseko, kuquka uphazamiseko olunokubangela ukusebenza okungafunekiyo kwesixhobo.

Ingxelo yokuvezwa kweRF:

Isixhobo sithobela umda wokuvezwa kwe-IC Radiation omiselwe indawo engalawulwayo. Esi sixhobo kufuneka sifakwe kwaye sisebenze kumgama ongaphantsi kwama-20cm phakathi kweradiyetha kunye nomzimba wakho.

Isilumkiso seFCC:

Esi sixhobo sithobela inxalenye ye-15 yeMithetho yeFCC. Umsebenzi uxhomekeke kwezi meko zimbini zilandelayo:

1. Esi sixhobo sisenokungabangeli uphazamiseko oluyingozi
2. Esi sixhobo kufuneka samkele naluphi na uphazamiseko olufunyenweyo, kubandakanywa uphazamiseko olunokubangela ukusebenza okungafunekiyo.

Naluphi na uTshintsho okanye uhlengahlengiso olungavunywanga ngokucacileyo liqela elinoxanduva lokuthotyelwa lunokuphelisa igunya lomsebenzisi lokusebenzisa isixhobo.

Esi sixhobo sivavanyiwe saza safunyanwa ukuba sithobela imida yesixhobo sedijithali soDidi B, ngokungqinelana nenxalenye ye-15 yeMithetho yeFCC. Le mida yenzelwe ukubonelela ngokhuseleko olufanelekileyo ekuphazamisekeni okuyingozi kwindawo yokuhlala. Esi sixhobo sivelisa ukusetyenziswa kwaye sinokusasaza amandla amaza erediyo kwaye, ukuba asifakanga kwaye sisetyenziswe ngokuhambelana nemiyalelo, sinokubangela uphazamiseko oluyingozi kunxibelelwano lwerediyo. Nangona kunjalo, akukho siqinisekiso sokuba ukuphazamiseka akuyi kwenzeka kufakelo oluthile. Ukuba esi sixhobo sibangela uphazamiseko oluyingozi kunomathotholo okanye ulwamkelo lukamabonakude, olunokumiselwa ngokucinywa nokulayita isixhobo, umsebenzisi uyakhuthazwa ukuba azame ukulungisa uphazamiseko ngenye okanye ngaphezulu kwezi ndlela zilandelayo:

• Jongisa kwakhona okanye uhambise i-eriyali efumanayo.
• Yandisa ukwahlukana phakathi kwesixhobo kunye nomamkeli.
• Qhagamshela izixhobo kwindawo yokuphuma kwisekethe eyahlukileyo kuleyo apho umamkeli aqhagamshelwe khona.
• Dibana nomthengisi okanye igcisa likanomathotholo/kumabonakude ukuze ufumane uncedo.

Ingxelo yokuvezwa kweFCC RF:

• Isixhobo sithobela imida yeFCC yokuvezwa ngemitha emiselwe indawo engalawulekiyo.
• Esi sixhobo kufuneka sifakwe kwaye sisebenze umgama ophakathi kwe-20cm yeradiyetha yomzimba wakho.

Amaxwebhu / Izibonelelo

DFirstCoder BT206 Scanner [pdf] Incwadi yokusebenzisa 2A3SM-201TAG, 2A3SM201TAG, 201tag, BT206 Scanner, BT206, Scanner

Iimbekiselo

• Incwadi yokusebenzisa