Tšebeletso ea Tšimo ea GMR Fantom™ Open Array Series
Bukana

GMR Fantom Open Array Series

TLHOKOMELO
Radar ea letoto la GMR Fantom Open Array e hlahisa le ho fetisa mahlaseli a sa boneng. Radara e tlameha ho tima pele e atamela sekena bakeng sa ts'ebeletso. Qoba ho sheba scanner ka ho toba ha e ntse e fetisa, kaha mahlo ke karolo ea 'mele e utloang bohloko ka ho fetisisa mahlaseling a motlakase. Pele u etsa tlhahlobo efe kapa efe ea tlhahlobo ea benche, tlosa lenakana 'me u kenye sethibela sa manakana se fanoeng Garmin Radar Service Kit (T10-00114-00). Ho hloleha ho kenya terminator ea antenna ho tla pepesetsa setsebi sa litšebeletso mahlaseling a kotsi a makenete a motlakase a ka bakang kotsi kapa lefu.
Radar ea letoto la GMR Fantom Open Array e na le matla a holimotages. Sekena se tlameha ho tima pele likoahelo li tlosoa. Ha u ntse u sebeletsa yuniti, hlokomela hore ho na le boima bo phahamengtagba teng mme ba nke mehato e hlokahalang.
Molumo o phahamengtage ka har'a seskena e ka nka nako hore e bole. Ho hlōleha ho latela temoso ena ho ka fella ka kotsi kapa lefu.
U SE KE UA beha radar ea letoto la GMR Fantom Open Array molemong oa liteko molemong oa ho bonts'a. Ha antenna e khomaretsoe, ho na le kotsi ea mahlaseli a se nang ionizing. Mekhoa ea teko e lokela ho sebelisoa feela molemong oa ho rarolla mathata ha lenaka le tlositsoe 'me sehlalisa sa lenakana se le teng.
Ho lokisa le ho lokisa lisebelisoa tsa elektroniki tsa Garmin ke mosebetsi o rarahaneng o ka bakang kotsi e mpe ea motho kapa tšenyo ea sehlahisoa haeba e sa etsoe ka nepo.
TSEBISO
Garmin ha e ikarabelle bakeng sa, ebile ha e fane ka tumello ea mosebetsi oo uena kapa mofani oa litokiso ea sa lumelloeng a o etsang sehlahisoa sa hau.
Lintlha tsa Bohlokoa Mabapi le Tšebeletso ea Tšimo ea GMR Fantom Open Array Series Radar

• Pele o etsa ts'ebeletso efe kapa efe ho radar, etsa bonnete ba hore software ea sistimi e nakong. Haeba ha ho joalo, e-ea ho www.garmin.com ho jarolla software ea morao-rao le ho nchafatsa radar (leqephe la 2). Tsoela pele ka ts'ebeletso ha feela software e sa rarolle bothata.
• Rekota nomoro ea serial ea radar ea hau. U tla hloka nomoro ea serial ha u reka likarolo tse ling.

Ho ikopanya le Ts'ehetso ea Sehlahisoa sa Garmin
Likarolo tse ncha li fumaneha feela ka Ts'ehetso ea Lihlahisoa tsa Garmin.

• Bakeng sa tšehetso e khethehileng ea morekisi, letsetsa 1-866-418-9438
• Eya ho ts'ehetso.garmin.com.
• USA, letsetsa 913-397-8200 kapa 1-800-800-1020.
• UK, letsetsa 0808 2380000.
• Europe, letsetsa +44 (0) 870.8501241.

Rea qala

Radar Software Update
Pele o sebelisa bukana ena ho rarolla bothata, etsa bonnete ba hore lisebelisoa tsohle tsa Garmin tse ka sekepeng, ho kenyeletsoa chartplotter le radar ea GMR Fantom Open Array series, li sebetsa ho mofuta oa morao-rao oa software. Lintlafatso tsa software li ka rarolla bothata.
Haeba chartplotter ea hau e na le sebali sa karete ea memori, kapa ho na le sebali sa karete ea memori ho Garmin Marine Network, o ka ntlafatsa software ka karete ea memori ho fihla ho 32 GB, e hlophisitsoeng ho FAT32.
Haeba chartplotter ea hau e na le Wi-Fi
thekenoloji, o ka sebelisa ActiveCaptain™
app ho nchafatsa software ea sesebelisoa.® Ho hlahloba Radar Software Version ho Chartplotter e Tšoanang

1. Bulela chartplotter.
2. Kgetha Di-setting > Dikgokahano > Marine Network, mme o hlokomele mofuta wa software o thathamisitsoeng bakeng sa radar.
3. Eya ho www.garmin.com/support/software/marine.html.
4. Tobetsa ho Bona Lisebelisoa Tsohle ho Bundle ena tlasa GPSMAP Series ka SD Card ho bona hore na software ea hau e nakong.

Ho nchafatsa Software ka ho Sebelisa App ea ActiveCaptain

TSEBISO
Lisebelisoa tsa software li ka hloka hore sesebelisoa se jarolle se seholo files. Meeli e tloaelehileng ea data kapa litefiso tse tsoang ho mofani oa litšebeletso tsa Marang-rang lia sebetsa. Ikopanye le mofani oa litšebeletso tsa hau tsa Marang-rang bakeng sa tlhahisoleseling e eketsehileng mabapi le meeli ea data kapa litefiso.
Tshebetso ea ho kenya e ka nka metsotso e mengata.
Haeba chartplotter ea hau e na le theknoloji ea Wi-Fi, u ka sebelisa sesebelisoa sa ActiveCaptain ho khoasolla le ho kenya lisebelisoa tsa morao-rao tsa software bakeng sa lisebelisoa tsa hau.

1. Hokela sesebelisoa sa mohala ho chartplotter e lumellanang.
2. Ha apdeite ea software e fumaneha 'me u na le phihlello ea inthanete sesebelisoa sa hau sa mohala, khetha Lintlafatso tsa Software > Khoasolla.
   Sesebelisoa sa ActiveCaptain se khoasolla ntlafatso ho sesebelisoa sa mohala. Ha o kopanya sesebelisoa hape ho chartplotter, ntlafatso e fetisetsoa sesebelisoa. Ka mor'a hore phetiso e phethoe, u khothalletsoa ho kenya apdeite.
3. Ha o susumetsoa ke chartplotter, khetha khetho ea ho kenya ntjhafatso.
   • Ho apdeita software hanghang, kgetha OK.
   • Ho diehisa apdeite, kgetha Hlakola. Ha u se u loketse ho kenya ntjhafatso, khetha ActiveCaptain> Lintlafatso tsa Software> Kenya Hona Joale.

Ho kenya Software e Ncha Karete ea Memori U Sebelisa Sesebelisoa sa Garmin Express™
O ka kopitsa apdeite ya software kareteng ya memori o sebedisa komporo e nang le app ya Garmin Express.
Ho khothaletsoa hore ho sebelisoe karete ea memori ea 8 GB kapa ho feta e hlophisitsoeng ho FAT32 ka lebelo la 10.
Ho jarolla software ho ka nka metsotso e seng mekae ho isa ho lihora tse 'maloa.
U lokela ho sebelisa karete ea memori e se nang letho bakeng sa liapdeite tsa software. Ts'ebetso ea ntlafatso e hlakola litaba tse kareteng ebe e fetola karete.

1. Kenya karete ya memori kahare ya karete khomphuteng.
2. Kenya sesebelisoa sa Garmin Express.
3. Khetha sekepe sa hau.
4. Kgetha Diapdeite tsa Software > Tsoelapele.
5. Bala 'me u lumellane le lipehelo.
6. Khetha drive bakeng sa karete ea memori.
7. Review temoso ya ho fomata, ebe o kgetha Tswella.
8. Ema ha apdeite ea software e ntse e kopitsoa kareteng ea memori.
9. Koala app ea Garmin Express.
10. Ntsha karete ya memori khomphuteng.

Ka mor'a ho kenya ntjhafatso ho karete ea memori, kenya software ho chartplotter.

Ho Nchafatsa Software ka ho Sebelisa Memory Card
Ho ntjhafatsa software ka ho sebedisa karete ya memori, o tlameha ho fumana softwareupdate memori card kapa ho kenya software ya moraorao kareteng ya memori o sebedisa app ya Garmin Express (leqephe la 2).

1. Bulela chartplotter.
2. Kamora hore skrine sa lapeng se hlahe, kenya karete ya memori ka hara karete ya karete.
   HLOKOMELA: E le hore litaelo tsa ntlafatso ea software li hlahe, sesebelisoa se tlameha ho phuthuloa ka botlalo pele karete e kenngoa.
3. Kgetha Apdeita Software > Ee.
4. Ema metsotso e 'maloa ha ts'ebetso ea ntlafatso ea software e phethela.
5. Ha u khothalletsoa, ​​​​tlohela karete ea memori sebakeng sa eona ebe u qala chartplotter hape.
6. Tlosa karete ya memori.
   HLOKOMELA: Haeba karete ya memori e ntshwa pele sesebediswa se ka qala botjha ka botlalo, apdeite ya software ha ea fella.

Leqephe la Tlhahlobo ea Radar
Ho bula Leqephe la Tlhahlobo ea Radar ho Chartplotter e Tšoanang

1. Ho tswa ho Skrine sa lapeng, kgetha Di-setting > Sistimi > Tlhahisoleseding ya Tsamaiso.
2. Tšoara k'honeng e kaholimo ho le letšehali la lebokose la tlhaiso-leseling la sistimi (moo le bonts'ang mofuta oa software) metsotsoana e ka bang tharo.
   Lenane la Field Diagnostics le hlaha lenaneng le ka ho le letona.
3.  Kgetha Diagnostics > Radar.

Viewho kenya Phoso e Felletseng Kena ho Chartplotter e Tšoanang
Radar e boloka tlaleho ea liphoso tse tlalehiloeng, 'me log ena e ka buloa ho sebelisoa chartplotter e lumellanang. Lenane la liphoso le na le liphoso tsa ho qetela tse 20 tse tlalehiloeng ke radar. Haeba ho khoneha, ho kgothaletswa ho view log ea phoso ha radar e kentsoe sekepeng moo bothata bo kopanang teng.

1. Ho chartplotter e lumellanang, bula leqephe la tlhahlobo ea radar.
2. Kgetha Radar > Lenane la diphoso.

Lisebelisoa Tse Hlokahalang

• Li-screwdriver
  • Nomoro ea 1 Phillips
  • Nomoro ea 2 Phillips
  • 6 limilimithara hex
  • 3 limilimithara hex
• Mekete
  • 16 mm (5/8 in.) (ho tlosa sehokelo sa marang-rang sa kahare)
  • 20.5 mm (13/16 in.) (ho tlosa matla a ka hare kapa sehokelo sa motheo)
• Lisebelisoa tsa ho boloka tse ka ntle (ho tlosa rotator ea antenna kapa lisebelisoa tsa ho khanna)
• Multimeter
• Garmin chartplotter e lumellanang
• 12 Vdc phepelo ea motlakase
• Sethala sa tšebeletso ea radar (T10-00114-00)
• Thae ea mohala

Ho batle phoso

Liphoso ho radar li tlalehoa ho chartplotter e le molaetsa oa phoso.
Ha radar e tlaleha phoso, e ka ema, ea kena boemong ba standby, kapa ea tsoela pele ho sebetsa, ho itšetlehile ka ho teba ha phoso. Ha phoso e hlaha, ela hloko molaetsa oa phoso 'me u etse mehato ea ho rarolla mathata pele u tsoela pele ka ho rarolla bothata bo itseng.

Mehato ea Universal ea ho rarolla mathata
U tlameha ho etsa mehato ena ea ho rarolla mathata pele u etsa liphoso tse itseng. U lokela ho etsa mehato ena ka tatellano, 'me u hlahlobe ho bona hore na phoso e sala ka mor'a ho etsa mohato ka mong. Haeba phoso e sala ka mor'a ho qeta mehato ena kaofela, u lokela ho bona sehlooho se lumellanang le molaetsa oa phoso oo u o fumaneng.

1. Nchafatsa software ea radar le chartplotter (leqephe la 2).
2. Lekola thapo ea motlakase ea radar le likhokahano ho radar le holim'a betri kapa boloko ba fuse.
   • Haeba thapo e senyehile kapa kgokelo e holehile, tlosa thapo kapa o hlwekise kgokelo.
   • Haeba thapo e le ntle, 'me likhokahano li hloekile, leka radar ka thapo e tsebahalang ea matla.
3. Lekola thapo ea Garmin Marine Network le likhokahano ho radar le chartplotter kapa GMS™ 10 network port extender.
   • Haeba thapo e senyehile, kapa kgokelo e holehile, tlosa thapo kapa o hlwekise kgokelo.
   • Haeba thapo e le ntle, 'me likhokahano li hloekile, leka radar ka thapo e tsebahalang e ntle ea Garmin Marine Network.

Boemo ba Radar LED
Boemo ba LED bo teng leiboleng ea sehlahisoa, 'me bo ka u thusa ho rarolla mathata a ho kenya.

Boemo ba 'mala oa LED le ts'ebetso	Boemo ba Radar
Bofubelu bo tiileng	Radar e se e loketse ho sebelisoa. LED e tiile ka bokhubelu ka bokhuts'oane 'me e fetoha botala bo benyang.
Botala bo benyang	Rada e sebetsa hantle.
Lamunu e benyang	Software ea radar e ntse e ntlafatsoa.
Bofubedu bo benyang	Radar e fumane phoso.

Ho leka Moqtage converter
GMR Fantom 120/250 letoto la liradar li hloka molumo oa kantletage converter ho fana ka voltage bakeng sa ts'ebetso. Setsi sa lits'ebeletso tsa radar se na le mohala oa terata oa liteko oo u ka o sebelisang ho lekola molumotage converter bakeng sa ts'ebetso e nepahetseng.
HLOKOMELA: Voltage converter ha e fane ka molumo o nepahetsengtagho bala ho li-pins tsa tlhahiso ntle le haeba o hokela lisebelisoa tsa wiring tsa liteko.

1. Hakolla voltage converter ho tloha radar.
2. Kopanya mohala oa terata oa teko ho voltage converter e sebelisang sehokelo pheletsong ea marapo ➊.
3. Haeba ho hlokahala, bulela phepelo ea matla ho voltage converter.
4. U sebelisa multimeter, leka molumo oa DCtagli-terminals holim'a lisebelisoa tsa terata tsa teko ➋.
   Haeba tekanyo e baleha 36 Vdc e tsitsitseng, joale molumotage converter e sebetsa hantle.

Likhoutu tsa Phoso le Melaetsa
Temoso e kholo le likhoutu tse matla tsa liphoso tsa radar li hlaha skrineng sa chartplotter. Likhoutu le melaetsa ena li ka thusa ha u rarolla radar. Ntle le litemoso tse kholo le likhoutu tsa liphoso tse matla, likhoutu tsohle tsa liphoso le tlhahlobo ea tlhahlobo li boetse li bolokiloe ka har'a logong la liphoso. U ka khona view logong ho chartplotter (leqephe la 2).

1004 - Input Voltage Low
1005 - Input Voltage Phahameng

1.  Etsa mehato e akaretsang ea ho rarolla mathata (leqephe la 3).
2. Qetella ketso:
   • Letotong la GMR Fantom 50, u sebelisa multimeter, hlahloba 10 ho ea ho 24 Vdc ka thapo ea matla e kopanyang radar.
   • Letotong la GMR Fantom 120/250, leka molumotage converter
3. Haeba tokiso e etsoa ho input voltage 'me bothata bo ntse bo tsoela pele, etsa mehato ea ho rarolla mathata (leqephe la 3) hape.
4. Sheba thapo ea motlakase e ka hare (leqephe la 8).
5. Haeba bothata bo ntse bo tsoela pele, fetola lebokose la lisebelisoa tsa elektroniki (leqephe la 7).
6. Haeba bothata bo ntse bo tsoela pele, nkela sebaka sa taolo ea makoloi PCB (leqephe la 7).

1013 - Mocheso oa Tsamaiso o Phahameng
1015 - Modulator Mocheso Phahameng

1. Etsa mehato e akaretsang ea ho rarolla mathata (leqephe la 3).
2. Sheba mocheso sebakeng se kentsoeng, 'me u netefatse hore se lumellana le litlhaloso tsa radar.
   HLOKOMELA: Litlhaloso tsa mocheso bakeng sa radar ea letoto la GMR Fantom 50/120/250 ke ho tloha ho -15 ho isa ho 55°C (ho tloha ho 5 ho isa ho 131°F).
3. Haeba ho lokisoa mocheso sebakeng se kentsoeng mme bothata bo ntse bo tsoela pele, etsa mehato ea ho rarolla mathata (leqephe la 3) hape.
4. Tlosa fene lebokoseng la lisebelisoa tsa elektroniki (leqephe la 7).
5. Haeba bothata bo ntse bo tsoela pele, fetola lebokose la lisebelisoa tsa elektroniki (leqephe la 7).

1019 - Lebelo la ho potoloha le ile la hloleha nakong ea Spin Up
1025 - Lebelo la ho potoloha ha lea ka la bolokoa

1. Etsa mehato e akaretsang ea ho rarolla mathata (leqephe la 3).
2. Haeba bothata bo ntse bo tsoela pele, ha radar e ntse e kentsoe sekepeng, bulela radar, 'me u qale ho tsamaisa.
3. Sheba lenakana.
4. Qetella ketso:
   • Haeba lenakana le potoloha 'me u fumana phoso ena, e ea ho "Lenakana lea potoloha" bakeng sa ho rarolla mathata.
   • Haeba lenakana le sa thinye 'me u fumana phoso ena, e ea ho "Lenakana ha le potoloha" bakeng sa ho rarolla mathata.

Antenna e ea potoloha

1. Koala radar, tlosa lenakana, 'me u kenye seterminator (leqephe la 6).
2. Bula ntlo ea maoto (leqephe la 6).
3. Hakolla thapo ea motlakase ho enjene ho ea ho molaoli oa enjene PCB.
4. Hakolla thapo ea ribone ho tloha lebokoseng la lisebelisoa tsa elektroniki ho PCB ea molaoli oa enjene le sensor ea boemo ba antenna PCB.
5. Lekola lithapo, lihokelo, le likou bakeng sa ts'enyehelo, 'me u phethe ketso:
   • Haeba thapo, sehokelo, kapa kou e senyehile, tlosa thapo e senyehileng kapa karolo e itseng.
   • Haeba lithapo, lihokelo, le likou kaofela li sa senyeha, e-ea mohatong o latelang.
6. Hokela hape lithapo tsohle ka mokhoa o sireletsehileng, 'me u leke ho bona hore na phoso e rarollotsoe.
7. Haeba phoso e ntse e tsoela pele, tlosa sensor ea boemo ba antenna PCB (leqephe la 7).
8. Haeba phoso e ntse e tsoela pele, khutlisetsa mochine oa PCB (leqephe la 7).
9. Haeba phoso e ntse e tsoela pele, fetola lebokose la lisebelisoa tsa elektroniki (leqephe la 7).

Antenna ha e potoloha

1. Koala radar, tlosa lenakana, 'me u kenye seterminator (leqephe la 6).
2. Bula ntlo ea maoto (leqephe la 6).
3. Hakolla thapo ea ribone ho tloha lebokoseng la lisebelisoa tsa elektroniki ho PCB ea molaoli oa enjene le sensor ea boemo ba antenna PCB.
4. Lekola thapo, lihokelo, le likou bakeng sa tšenyo, 'me u qete ketso:
   • Haeba thapo, sehokelo, kapa kou e senyehile, tlosa thapo e senyehileng kapa karolo e itseng.
   • Haeba lithapo, lihokelo, le likou kaofela li sa senyeha, fetela mohatong o latelang.
5. Hokela hape lithapo tsohle ka mokhoa o sireletsehileng 'me u leke ho bona hore na phoso e rarollotsoe.
6. Tlosa kopano ea enjene (leqephe la 6).
7. Lekola lisebelisoa tsa koloi le lisebelisoa tsa antenna bakeng sa ts'enyehelo, 'me u phethe ketso:
   • Haeba lisebelisoa tsa motlakase li senyehile, khutlisetsa mochine (leqephe la 6).
   • Haeba sesebediswa sa ho kganna sa lenakana se senyehile, fetola sekoahelo sa lenakana (leqephe la 8).
   • Haeba likere li sa senyeha, tsoela pele mohatong o latelang.
8. Fetola sesebediswa sa koloi ka letsoho, mme o shebe hore na se potoloha jwang:
   • Haeba lisebelisoa tsa motlakase li le thata ho li fetola, kapa li sa retelehe ha bonolo, nka sebaka sa kopano ea enjene.
   • Haeba lisebelisoa tsa motlakase li fetoha hantle le ha bonolo, tsoela pele mohatong o latelang.
9. Nka sebaka sa "motor controller" PCB (leqephe la 7).
10. Haeba phoso e sa rarolloa, fetola lebokose la lisebelisoa tsa elektroniki (leqephe la 7).

Ho hloleha ha ho na Khoutu ea Phoso

Radar ha e hlahe lethathamong la lisebelisoa tsa marang-rang, 'me ha ho molaetsa oa phoso o bontšitsoeng

1. Sheba thapo ea marang-rang:
   1.1 Lekola thapo ya netweke ya radar bakeng sa tshenyo e thapo kapa dikgokelo.
   1.2 Ha ho khoneha, hlahloba thapo ea marang-rang ea radar bakeng sa ho tsoela pele.
   1.3 Lokisa kapa thapo e ncha ha ho hlokahala.
2. Haeba sesebelisoa sa marang-rang sa GMS 10 se kentsoe, sheba li-LED tse ho GMS 10 bakeng sa tšebetso:
   2.1 Haeba ho se na ts'ebetso, hlahloba thapo ea motlakase ea GMS 10 bakeng sa ts'enyehelo thapo kapa likhokahanyo.
   2.2 Haeba ho se na ts'ebetso, hlahloba thapo ea marang-rang ho tloha ho chartplotter ho ea ho GMS 10 bakeng sa tšenyo ho cable kapa li-connectors.
   2.3 Ha ho khoneha, hlahloba thapo ea marang-rang bakeng sa ho tsoela pele.
   2.4 Lokisa kapa chencha GMS 10 kapa likhoele ha ho hlokahala.
3. Lekola likhoele tsa marang-rang tse kahare (leqephe la 8), 'me u khutlisetse lithapo ha ho hlokahala.
4. Sheba khokahano ea motlakase ea kantle:
   4.1 Ha radar e tima, hlahloba fuse thapong ea motlakase, 'me u e nkele sebaka ka 15 Fuse ea mofuta oa lehare le butle ha ho hlokahala.
   4.2 Lekola thapo ya motlakase bakeng sa tshenyeho ya thapo kapa dihokelo, mme o lokise, o e fetole, kapa o hatelle thapo ha ho hlokahala.
5. Haeba radar e sebelisa matla a kantletage converter, leka converter (leqephe la 3), 'me u e nkele sebaka ha ho hlokahala.
6. Lekola thapo ea motlakase e kahare (leqephe la 8), 'me u e khutlisetse ha ho hlokahala.
7. U sebelisa multimeter, hlahloba molumotage holim'a thapo ea motlakase ho tloha ho PCB ea taolo ea enjene ho ea lebokoseng la lisebelisoa tsa elektroniki.
   Haeba u sa bale 12 Vdc, tlosa thapo ho tloha ho PCB ea motlakase ho ea lebokoseng la lisebelisoa tsa elektroniki.
8. Hokela radar ho chartplotter e tsebahalang e ntle.
9. Haeba radar e sa hlahe lethathamong la marang-rang bakeng sa chartplotter e sebetsang e tsebahalang, nka sebaka sa lebokose la elektronike (leqephe la 7).
10. Haeba phoso e sa rarolloa, nkela sebaka sa "motor controller" PCB (leqephe la 7).

Ha ho setšoantšo sa radar kapa setšoantšo sa radar se fokolang haholo, 'me ha ho molaetsa oa phoso o bontšitsoeng

1. U sebelisa leqephe la tlhahlobo ea radar ho chartplotter (leqephe la 2), khutlisetsa radar ho litlhophiso tsa kamehla tsa feme.
2. Haeba phoso e sa rarolloa, fetola lebokose la lisebelisoa tsa elektroniki (leqephe la 7).
3. Haeba phoso e sa rarolloe, fetola lenonyeletso la rotary (leqephe la 7).
4. Haeba phoso e sa rarolloe, kenya antenna e ncha.

"Radar Service Lost" e bontšoa ho chartplotter

1. Lekola likhokahano tsohle tsa matla le marang-rang ho radar, chartplotter, betri, le sesebelisoa sa marang-rang sa GMS 10 ha se sebetsa.
2. Tiisa kapa u lokise lithapo life kapa life tse hlephileng, tse khaotsoeng, kapa tse senyehileng.
3. Haeba lithapo tsa motlakase li atolosoa, etsa bonnete ba hore tekanyo ea terata e nepahetse bakeng sa sebaka se atolositsoeng, ho latela GMR Fantom Open Array Series Institation Instructions.
   Haeba tekanyo ea terata e le nyane haholo, e ka baka molumo o moholotage theohe 'me u bake phoso ena.
4. Lekola thapo ea motlakase e kahare (leqephe la 8), 'me u e khutlisetse ha ho hlokahala.
5. Tlosa lebokose la lisebelisoa tsa elektronike (leqephe la 7).

Libaka tse kholo tsa Karolo

Ntho	Tlhaloso	Hlokomela
➊	Antenna rotator	Ho tlosa rotator ea antenna, o tlameha ho tlosa lebokose la elektronike, motsoako oa rotary le gear ea koloi ea antenna.
➋	Kopano ea li-motor/gearbox
➌	Molaoli oa likoloi PCB
➍	Sensor ea boemo ba antenna PCB	Ho tlosa sensor ea boemo ba antenna PCB, o tlameha ho tlosa lenonyeletso la rotary
➎	Lisebelisoa tsa ho khanna li-antenna
➏	Khokahano ea rotary	Ho tlosa motsoako oa rotary, o tlameha ho tlosa lebokose la elektronike
➐	Lebokose la elektronike

Radar Disassembly

Ho tlosa Antenna
TLHOKOMELO
Pele o etsa tšebeletso efe kapa efe radar, o tlameha ho ntša lenakana ho qoba mahlaseli a kotsi.

1. Tlosa motlakase ho radar.
2. U sebelisa 6 mm hex bit, tlosa li-screw tse 'nè le li-washer tse' nè tse arohaneng tlas'a letsoho la lenakana.
3. Phahamisa ka ho kenya khatello ka ho lekana mahlakoreng ka bobeli a lenakana.

E lokela ho hula habonolo.
Ho kenya Terminator ea Antenna
Ka mor'a ho ntša lenakana, o tlameha ho kenya mochine oa ho emisa.
Garmin Radar Service Kit (T10-00114-00) e na le terminator ea antenna le li-screw tse tharo ho e tšoara.

1. Tšoara sekhutlo sa lenakana ➊ khahlanong le karolo e bataletseng ea lenonyeletso la rotary ➋.
2. Sebelisa li-screw tse tharo ➌ ho tlamella sethibela sa manakana lenonyeletsong la rotary.

Ho Bula Pedestal Housing
TLHOKOMELO
Likarolo tsa radar tse hlonngoeng kaholimo ho ntlo ea pedestal li etsa hore ntlo e be boima. Ho qoba kotsi e ka 'nang ea e-ba teng le kotsi e ka' nang ea etsahala, ela hloko ha u bula pedestal housing.

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. U sebelisa 6 mm hex bit, lokolla liboutu tse ts'eletseng ➊ holim'a pedestal housing.
4. Phahamisa ka holim'a ntlo ea pedestal ho fihlela e emisa le liloko tsa hinge ➋.
   Hinge e holim'a pedestal housing e tšoara sebakeng se bulehileng.

Ho tlosa Seboka sa Motor

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Hakolla thapo ea enjene ho PCB ea taolo ea enjene.
5. U sebelisa 6 mm hex bit, tlosa liboutu tse 'ne tse tiisang kopano ea enjene ntlong ea maoto.
6. Tlosa kopano ea motlakase.

Ho tlosa Fane ho Lebokose la Elektronike

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Hakolla thapo ea fene lebokoseng la lisebelisoa tsa elektroniki.
5. Tlosa li-screws tse 4 tse sireletsang fene lebokoseng la lisebelisoa tsa elektroniki.
6. Tlosa fene.

Ho Tlosa Lebokose la Elektronike

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Hakolla lihokelo tsohle likoung tse lebokoseng la lisebelisoa tsa elektroniki.
5. U sebelisa 3 mm hex bit, tlosa li-screw tse 'nè tse tšoereng lebokose la lisebelisoa tsa elektroniki ho ea ho pedestal housing.
6. Tlosa lebokose la lisebelisoa tsa elektroniki ho tloha ntlong ea maoto.

Ho tlosa Motor Controller PCB

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Hakolla thapo ea motlakase ho PCB ea Motor Controller.
5. U sebelisa 3 mm hex bit, tlosa li-screw tse hlano tse sireletsang motlakase oa PCB sebakeng sa pedestal housing.

Ho tlosa lenonyeletso la Rotary

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Tlosa lebokose la elektronike (leqephe la 7).
5. U sebelisa #2 Phillips screwdriver, tlosa likurufu tse tharo tse hokahanyang lenonyeletso la rotary le pedestal housing.
6. Tlosa motsoako oa rotary.

Ho tlosa Antenna Position Sensor PCB

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Tlosa lebokose la elektronike (leqephe la 7).
5. Tlosa lenonyeletso la rotary (leqephe la 7).
6. U sebelisa screwdriver e bataletseng, phahamisa pheletso ea sensor ea boemo ba antenna 'me u e thelle ho tsoa ho waveguide.

PCB ea sensor ea boemo ba antenna e lekana hantle sebakeng sa lenonyeletso la rotary, kahoo ho ka nka matla ho e tima, 'me PCB e ka robeha.
Ho kenya Sensor e Ncha ea Antenna Position PCB

1. Tlosa PCB ea khale ea sensor ea boemo ba antenna.
2. Tsamaisa PCB e ncha ea sensor ea boemo ba antenna ka har'a li-slots ho waveguide.

Sebaka se phahamisitsoeng ho waveguide se kenella ka sekoting se ho sensor ea boemo ba antenna PCB ho e ts'oara.

Ho tlosa Antenna Drive Gear

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Tlosa lebokose la elektronike (leqephe la 7).
5. Tlosa lenonyeletso la rotary (leqephe la 7).
6. U sebelisa lipilara tse bolokang kantle, tlosa selikalikoe se ts'oereng lesela la antenna ho rotator ea antenna.
7. Tlosa lisebelisoa tsa koloi ea antenna ho tloha ho rotator ea antenna

Ho tlosa Antenna Rotator

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Tlosa lebokose la elektronike (leqephe la 7).
5. Tlosa lenonyeletso la rotary (leqephe la 7).
6. Tlosa lisebelisoa tsa ho khanna manaka (leqephe la 8).
7. U sebelisa lithaelese tsa ho boloka tse ka ntle, tlosa selikalikoe se ts'oereng antenna rotator holim'a ntlo ea pedestal.
8. Tlosa rotator ea antenna ho tloha ntlong ea maoto.

Ho Tlosa Matla a ka Hare, Marang-rang, le Lithapo Tsa ho Theha

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Bula ntlo ea maoto (leqephe la 6).
4. Khaola thae ea lithapo ho lithapo tsa motlakase / marang-rang ho fumana phihlello (etsa bonnete ba hore u eketsa thae e ncha ha u kopanya hape).
5. Qetella ketso:
   • Hakolla marapo a motlakase.
   • Hakolla lehare la netweke.
   • Ka ho sebelisa screwdriver ea #2 Phillips, qhaqha marapo a fatše ho tloha motheong oa pedestal housing.
6. Qetella ketso.
   • Ho hakolla marapo a motlakase kapa a fatše, sebelisa sokete ea 20.5 mm (13 /16in.).
   • Ho hakolla marapo a marangrang, sebelisa sokete ea 16 mm (5/8in.).
7. Sebelisa sokete e loketseng ho hlephisa sehokelo se ka ntle ho ntlo ea pedestal.
8. Tlosa nate ea polasetiki sehokelong se kantle ho ntlo ea maoto.

Cable e hula mahala ka hare ho ntlo.

Ho Tlosa Mount Socket

1. Tlosa motlakase ho radar.
2. Tlosa lenakana (leqephe la 6).
3. Haeba ho hlokahala, tlosa linate, li-washers, le molamu o lohiloeng ho tloha soketeng e senyehileng.
4. Bula ntlo ea maoto (leqephe la 6).
5. U sebelisa sekoti sa 3 mm hex, tlosa sokete e senyehileng.

Likarolo tsa Tšebeletso

Nomoro	Tlhaloso
➊	Ntlo ea maoto
➋	Antenna rotator
➌	Kopano ea likoloi
➍	Molaoli oa likoloi PCB
➎	Mofani oa lebokose la elektroniki
➏	Sensor ea boemo ba antenna PCB
➐	Sesebelisoa sa rotary sa antenna
➑	Khokahano ea rotary
➒	Lebokose la elektronike
➓	Gasket ea bolulo
11	Lithapo tsa ka hare tsa terata
Ha e bontšoe	Mount socket
	Monyako o ka ntle oa sekoahelo sa cable
	Moqtage converter

© 2019-2024 Garmin Ltd. kapa litšehetso tsa eona
Litokelo tsohle li sirelelitsoe. Tlas'a melao ea litokelo, bukana ena e ke ke ea kopitsoa, ​​e feletse kapa karolo e 'ngoe, ntle le tumello e ngotsoeng ea Garmin. Garmin e na le tokelo ea ho fetola kapa ho ntlafatsa lihlahisoa tsa eona le ho etsa liphetoho ho litaba tsa bukana ena ntle le tlamo ea ho tsebisa motho leha e le ofe kapa mokhatlo ofe kapa ofe ka liphetoho kapa lintlafatso tse joalo. Eya ho www.garmin.com bakeng sa liapdeite tsa hajoale le tlhaiso-leseling ea tlatsetso mabapi le ts'ebeliso ea sehlahisoa sena.
Garmin®, logo ya Garmin, le GPSMAP® ke matshwao a kgwebo a Garmin Ltd. kapa ditsi tsa yona, tse ngodisitsweng USA le dinaheng tse ding. Garmin Express™, GMR Fantom™, GMS™, le ActiveCaptain® ke matshwao a kgwebo a Garmin Ltd. kapa ditsiane tsa yona. Lits'oants'o tsena tsa khoebo li kanna tsa se sebelisoe ntle le tumello e hlakileng ea Garmin.
Wi-Fi® ke letšoao le ngolisitsoeng la Wi-Fi Alliance Corporation. Windows® ke letšoao la khoebo le ngolisitsoeng la Microsoft Corporation United States le linaheng tse ling.
Matshwao a mang kaofela a dikhopi le ditokelo ke thepa ya beng ba tsona.

© 2019-2024 Garmin Ltd. kapa litšehetso tsa eona
ts'ehetso.garmin.com
190-02392-03_0C
Phupu 2024
E hatisitsoe Taiwan

Litokomane / Lisebelisoa

GARMIN GMR Fantom Open Array Series [pdf] Buka ea Taelo GMR Fantom Open Array Series, GMR Fantom Open Array Series, Fantom Open Array Series, Open Array Series, Array Series, Series.

Litšupiso

• Bukana ea Mosebelisi