GoPoint for i.MX Applications Processors
“
Specifications
Product Name: GoPoint for i.MX Applications
Processors
Version: 11.0
Release Date: 11 April 2025
Compatibility: i.MX family Linux BSP
Product Information
GoPoint for i.MX Applications Processors is a user-friendly
application that allows users to launch preselected demonstrations
included in the NXP provided Linux Board Support Package (BSP). It
is designed to showcase the features and capabilities of NXP
provided SoCs through easy-to-run demos suitable for users of all
skill levels.
Usage Instructions
Setting up GoPoint for i.MX Applications Processors
- Ensure you have the compatible i.MX family Linux BSP
installed. - If needed, include the GoPoint application by adding
packagegroup-imx-gopoint to your Yocto images.
Running Demos
- Launch the GoPoint application on your device.
- Select the demo you wish to run from the available
options. - Follow any on-screen instructions or prompts to run the
selected demo.
FAQ
Q: What devices are supported by GoPoint for i.MX Applications
Processors?
A: GoPoint is supported on devices from the
i.MX 7, i.MX 8, and i.MX 9 families. For a detailed list, refer to
Table 1 in the user guide.
Q: How can I add GoPoint to my Yocto images?
A: You can include the GoPoint application by
adding packagegroup-imx-gopoint to your Yocto images. This package
is included in the imx-full-image package when the fsl-imx-xwayland
distribution is selected on supported devices.
“`
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Rev. 11.0 — 11 April 2025
User guide
Document information
Information
Content
Keywords
GoPoint, Linux demo, i.MX demos, MPU, ML, machine learning, multimedia, ELE, GoPoint for i.MX Applications Processors, i.MX Applications Processors
Abstract
This document explains how to run GoPoint for i.MX Applications Processors and details about the applications included in the launcher.
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
1 Introduction
GoPoint for i.MX Applications Processors is a user-friendly application that allows the user to launch preselected demonstrations included in the NXP provided Linux Board Support Package (BSP).
GoPoint for i.MX Applications Processors is for users who are interested in showcasing the various features and capabilities of NXP provided SoCs. The demos included in this application are meant to be easy to run for users of all skill levels, making complex use cases accessible to anyone. Users need some knowledge when setting up equipment on Evaluation Kits (EVKs), such as changing Device Tree Blob (DTB) files.
This user guide is intended for end users of GoPoint for i.MX Applications Processors. This document explains how to run GoPoint for i.MX Applications Processors and covers the applications included in the launcher.
2 Release information
GoPoint for i.MX Applications Processors is compatible with the i.MX family Linux BSP available at IMXLINUX. GoPoint for i.MX Applications Processors and it’s included applications that are packaged alongside with it are included in binary demo files displayed on IMXLINUX.
Alternatively, users can include the GoPoint for i.MX Applications Processors and its applications, by including “packagegroup-imx-gopoint” in their Yocto images. This package is included in the “imx-full-image” package when the “fsl-imx-xwayland” distribution is selected on supported devices.
This document only covers information that is related to the Linux 6.12.3_1.0.0 release. For other releases, see the respective user guide for that release.
2.1 Supported devices
GoPoint for i.MX Applications Processors is supported on the devices listed in Table 1.
Table 1.Supported devices i.MX 7 family
i.MX 7ULP EVK
i.MX 8 family i.MX 8MQ EVK i.MX 8MM EVK i.MX 8MN EVK i.MX 8QXPC0 MEK i.MX 8QM MEK i.MX 8MP EVK i.MX 8ULP EVL
i.MX 9 family i.MX 93 EVK i.MX 95 EVK
For information about the i.MX-based FRDM development boards and ports, see https://github.com/nxp-imxsupport/meta-imx-frdm/blob/lf-6.6.36-2.1.0/README.md.
2.2 GoPoint applications release package
Table 2 and Table 3 list packages included in the GoPoint for i.MX Applications Processors release package. The specific applications vary between releases.
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 2 / 11
NXP Semiconductors
Table 2.GoPoint framework Name nxp-demo-experience meta-nxp-demo-experience nxp-demo-experience-assets
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Branch lf-6.12.3_1.0.0 styhead-6.12.3-1.0.0 lf-6.12.3_1.0.0
Table 3.Application package dependencies Name nxp-demo-experience-demos-list imx-ebike-vit imx-ele-demo nxp-nnstreamer-examples imx-smart-fitness smart-kitchen imx-video-to-texture imx-voiceui imx-voiceplayer gtec-demo-framework imx-gpu-viv
Branch/Commit lf-6.12.3_1.0.0 6c5917c8afa70ed0ac832184f6b8e289cb740905 2134feeef0c7a89b02664c97b5083c6a47094b85 5d9a7a674e5269708f657e5f3bbec206fb512349 5ac9a93c6c651e97278dffc0e2b979b3a6e16475 1f42aceae2e79f4b5c7cd29c169cc3ebd1fce78a 5d55728b5c562f12fa9ea513fc4be414640eb921 5eac64dc0f93c755941770c46d5e315aec523b3d ab1304afa7fa4ec4f839bbe0b9c06dadb2a21d25 1f512be500cecb392b24a154e83f0e7cd4655f3e Closed source
2.3 Applications provided by application packages
For documentation on each application, follow the link related to the application of interest.
Table 4.nxp-demo-experience-demos-list Demo ML Gateway Selfie Segmenter ML Benchmark Face Recognition DMS LP Baby Cry Detection LP KWS Detection Video Test
Camera using VPU 2Way Video Streaming Multi Cameras Preview ISP Control
Supported SoCs i.MX 8MM, i.MX 8MP, i.MX 93 i.MX 8MP, i.MX 93 i.MX 8MP, i.MX 93, i.MX 95 i.MX 8MP i.MX 8MP, i.MX 93 i.MX 93 i.MX 93 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 93 i.MX 8MP i.MX 8MM, i.MX 8MP i.MX 8MP i.MX 8MP
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 3 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Table 4.nxp-demo-experience-demos-list…continued Demo Video Dump Audio Record Audio Play TSN 802.1Qbv
Supported SoCs i.MX 8MP i.MX 7ULP i.MX 7ULP i.MX 8MM, i.MX 8MP
Table 5.imx-ebike-vit Demo
E-Bike VIT
Supported SoCs i.MX 8MM, i.MX 8MP, i.MX 93
Table 6.imx-ele-demo Demo
EdgeLock Secure Enclave
Supported SoCs i.MX 93
Table 7.nxp-nnstreamer-examples Demo Image Classification Object Detection Pose Estimation
Supported SoCs i.MX 8MM, i.MX 8MP, i.MX 8QMMEK, i.MX 93, i.MX 95 i.MX 8MM, i.MX 8MP, i.MX 8QMMEK, i.MX 93, i.MX 95 i.MX 8MM, i.MX 8MP, i.MX 8QMMEK, i.MX 93, i.MX 95
Table 8.imx-smart-fitness Demo
i.MX Smart Fitness
Supported SoCs i.MX 8MP, i.MX 93
Table 9.smart-kitchen Demo
Smart Kitchen
Supported SoCs i.MX 8MM, i.MX 8MP, i.MX 93
Table 10.imx-video-to-texture Demo
Video To Texture Demo
Supported SoCs i.MX 8QMMEK, i.MX 95
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 4 / 11
NXP Semiconductors
Table 11.imx-voiceui Demo i.MX Voice Control
Table 12.imx-voiceplayer Demo i.MX Multimedia Player
Table 13.gtec-demo-framework Demo Bloom Blur
EightLayerBlend
FractalShader
LineBuilder101
Model Loader
S03_Transform
S04_Projection
S06_Texturing
Mapping
Mapping Refraction
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Supported SoCs i.MX 8MM, i.MX 8MP
Supported SoCs i.MX 8MM, i.MX 8MP, i.MX 93
Supported SoCs i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95 i.MX 7ULP, i.MX 8MQ, i.MX 8MM, i.MX 8MN, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP, i.MX 95
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 5 / 11
NXP Semiconductors
Table 14.imx-gpu-viv Demo Vivante Launcher Cover Flow Vivante Tutorial
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Supported SoCs i.MX 7ULP, i.MX 8QXPC0MEK, i.MX 8QMMEK, i.MX 8MP, i.MX 8ULP i.MX 7ULP, i.MX 8ULP i.MX 7ULP, i.MX 8ULP
2.4 Changes in this release
· Bumped recipes to pick the latest software release
2.5 Known issues and workarounds
· MIPI-CSI cameras no longer work by default. For more information on how to start, see “chapter 7.3.8” in i.MX Linux User’s Guide (document IMXLUG).
3 Launching applications
Applications that are included in GoPoint for i.MX Applications Processors can be launched via various interfaces.
3.1 Graphical user interface
On boards where GoPoint for i.MX Applications Processors is available, an NXP logo is displayed on the top left-hand corner of the screen. Users can start the demo launcher by clicking this logo.
Figure 1.GoPoint for i.MX Applications Processors logo
After opening the program, users can launch demos using the following options shown in Figure 2:
1. To filter the list, select the icon on the left to expand the filter menu. From this menu, users can select a category or subcategory that filters the demos displayed in the launcher.
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 6 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
2. A scrollable list of all the demos supported on that EVK appears in this area with any filters applied. Clicking a demo in the launcher brings up information about the demo.
3. This area displays the names, categories, and description of the demos.
4. Clicking Launch Demo launches the currently selected demo. A demo can then be force-quit by clicking the Stop current demo button in the launcher (appears once a demo is started). Note: Only one demo can be launched at a time.
Figure 2.GoPoint for i.MX Applications Processors
3.2 Text user interface
Demos can also be launched from the command line through log-in into the board remotely or using the onboard serial debug console. Remember that most demos still require a display to run successfully. Note: If prompted for a login, the default user name is “root” and no password is required. To start the text user interface (TUI), type the following command into the command line:
# gopoint tui
The interface can be navigated using the following keyboard inputs: · Up and down arrow keys: Select a demo from the list on the left · Enter key: Runs the selected demo · Q key or Ctrl+C keys: Quit the interface · H key: Opens the help menu Demos can be closed by closing the demo onscreen or pressing the “Ctrl” and “C” keys at the same time.
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 7 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Figure 3.Text user interface
4 References
The references used to supplement this document are as follows:
· 8-microphone array board: 8MIC-RPI-MX8 · Embedded Linux for i.MX Applications Processors: IMXLINUX · i.MX Yocto Project User Guide (document IMXLXYOCTOUG) · i.MX Linux User’s Guide (document IMXLUG) · i.MX 8MIC-RPI-MX8 Board Quick Start Guide (document IMX-8MIC-QSG) · i.MX 8M Plus Gateway for Machine Learning Inference Acceleration (document AN13650) · TSN 802.1Qbv Demonstration using i.MX 8M Plus (document AN13995)
5 Note about the source code in the document
Example code shown in this document has the following copyright and BSD-3-Clause license:
Copyright 2025 NXP Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:
1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials must be provided with the distribution.
3. Neither the name of the copyright holder nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 8 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
6 Revision history
Table 15 summarizes the revisions to this document.
Table 15.Revision history
Revision number
Release date
GPNTUG v.11.0
11 April 2025
GPNTUG v.10.0
GPNTUG v.9.0 GPNTUG v.8.0
30 September 2024
8 July 2024 11 April 2024
GPNTUG v.7.0
15 December 2023
GPNTUG v.6.0 GPNTUG v.5.0 GPNTUG v.4.0 GPNTUG v.3.0 GPNTUG v.2.0 GPNTUG v.1.0
30 October 2023 22 August 2023 28 June 2023 07 December 2022 16 September 2022 24 June 2022
Description
· Updated Section 1 “Introduction” · Added Section 2 “Release information” · Updated Section 3 “Launching applications” · Updated Section 4 “References”
· Added i.MX E-Bike VIT · Updated References
· Added Security
· Updated NNStreamer demos · Updated Object classification · Updated Object detection · Removed section “Brand detection” · Updated Machine learning gateway · Updated Driver monitoring system demo · Updated Selfie segmenter · Added i.MX smart fitness · Added Low-power machine learning demo
· Updated for the 6.1.55_2.2.0 release · Rename from NXP Demo Experience to GoPoint for i.MX
Applications Processors · Added 2Way video streaming
Updated for the 6.1.36_2.1.0 release
Added i.MX multimedia player
Added TSN 802.1 Qbv demo
Updated for 5.15.71 release
Updated for 5.15.52 release
Initial release
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 9 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Legal information
Definitions
Draft — A draft status on a document indicates that the content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included in a draft version of a document and shall have no liability for the consequences of use of such information.
Disclaimers
Limited warranty and liability — Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. NXP Semiconductors takes no responsibility for the content in this document if provided by an information source outside of NXP Semiconductors. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including – without limitation lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors’ aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors.
Right to make changes — NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof.
Suitability for use — NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors and its suppliers accept no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer’s own risk.
Applications — Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer’s sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer’s applications and products planned, as well as for the planned application and use of customer’s third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer’s applications or products, or the application or use by customer’s third party customer(s). Customer is responsible for doing all necessary testing for the customer’s applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer’s third party customer(s). NXP does not accept any liability in this respect.
Terms and conditions of commercial sale — NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at https://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer’s general terms and conditions with regard to the purchase of NXP Semiconductors products by customer.
Export control — This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from competent authorities.
Suitability for use in non-automotive qualified products — Unless this document expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors’ warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors’ specifications such use shall be solely at customer’s own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors’ standard warranty and NXP Semiconductors’ product specifications.
HTML publications — An HTML version, if available, of this document is provided as a courtesy. Definitive information is contained in the applicable document in PDF format. If there is a discrepancy between the HTML document and the PDF document, the PDF document has priority.
Translations — A non-English (translated) version of a document, including the legal information in that document, is for reference only. The English version shall prevail in case of any discrepancy between the translated and English versions.
Security — Customer understands that all NXP products may be subject to unidentified vulnerabilities or may support established security standards or specifications with known limitations. Customer is responsible for the design and operation of its applications and products throughout their lifecycles to reduce the effect of these vulnerabilities on customer’s applications and products. Customer’s responsibility also extends to other open and/or proprietary technologies supported by NXP products for use in customer’s applications. NXP accepts no liability for any vulnerability. Customer should regularly check security updates from NXP and follow up appropriately. Customer shall select products with security features that best meet rules, regulations, and standards of the intended application and make the ultimate design decisions regarding its products and is solely responsible for compliance with all legal, regulatory, and security related requirements concerning its products, regardless of any information or support that may be provided by NXP. NXP has a Product Security Incident Response Team (PSIRT) (reachable at PSIRT@nxp.com) that manages the investigation, reporting, and solution release to security vulnerabilities of NXP products.
NXP B.V. — NXP B.V. is not an operating company and it does not distribute or sell products.
Trademarks
Notice: All referenced brands, product names, service names, and trademarks are the property of their respective owners.
NXP — wordmark and logo are trademarks of NXP B.V.
GPNTUG_v.11.0
User guide
All information provided in this document is subject to legal disclaimers.
Rev. 11.0 — 11 April 2025
© 2025 NXP B.V. All rights reserved.
Document feedback 10 / 11
NXP Semiconductors
GPNTUG_v.11.0
GoPoint for i.MX Applications Processors User Guide
Contents
1
Introduction ……………………………………………… 2
2
Release information …………………………………. 2
2.1
Supported devices ……………………………………… 2
2.2
GoPoint applications release package ……………2
2.3
Applications provided by application
packages ……………………………………………………3
2.4
Changes in this release ……………………………….6
2.5
Known issues and workarounds ……………………6
3
Launching applications ……………………………..6
3.1
Graphical user interface ……………………………… 6
3.2
Text user interface ……………………………………… 7
4
References ………………………………………………..8
5
Note about the source code in the
document ………………………………………………….8
6
Revision history ………………………………………..9
Legal information …………………………………….10
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section ‘Legal information’.
© 2025 NXP B.V.
All rights reserved.
For more information, please visit: https://www.nxp.com
Document feedback
Date of release: 11 April 2025 Document identifier: GPNTUG_v.11.0
Documents / Resources
 |
NXP GoPoint for i.MX Applications Processors [pdf] User Guide GoPoint for i.MX Applications Processors, i.MX Applications Processors, Applications Processors, Processors |