Isine ndhelikake
1 DJI Manifold 3 High Performance Onboard Computing Power Box
2 Nggunakake Manual iki
3 Pro Produkfile
4 Instalasi
5 Panganggone
6 Kontak
7 Dokumen / Sumber Daya
7.1 Referensi

dji-logo

DJI Manifold 3 High Performance Onboard Computing Power Box

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-product

Dokumen iki duwe hak cipta dening DJI kanthi kabeh hak dilindhungi undhang-undhang. Kajaba diwenehake dening DJI, sampeyan ora layak nggunakake utawa ngidini wong liya nggunakake dokumen utawa bagean saka dokumen kasebut kanthi ngasilake, nransfer utawa ngedol dokumen kasebut. Mung deleng dokumen iki lan isine minangka instruksi kanggo ngoperasikake produk DJI. Dokumen kasebut ora bisa digunakake kanggo tujuan liyane.
Yen ana bedane ing antarane versi sing beda-beda, versi Inggris bakal ditrapake.

Nggoleki Kata Kunci
Nggoleki tembung kunci kayata "baterei" lan "instal" kanggo nemokake topik. Yen sampeyan nggunakake Adobe Acrobat Reader kanggo maca dokumen iki, pencet Ctrl+F ing Windows utawa Command+F ing Mac kanggo miwiti telusuran.

Navigasi menyang Topik
View dhaptar lengkap topik ing daftar isi. Klik ing topik kanggo navigasi menyang bagean kasebut.

Printing Dokumen iki
Dokumen iki ndhukung printing kanthi resolusi dhuwur.

Nggunakake Manual iki

Legenda

  • penting
  • Petunjuk lan Tips
  • Referensi

Video Tutorial

Bukak alamat ing ngisor iki utawa pindai kode QR kanggo nonton video tutorial, sing nuduhake carane nggunakake produk kanthi aman:

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-1https://enterprise.dji.com/manifold-3/video

Unduh DJI Assistant 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Mung ndhukung versi Windows.

Pro Produkfile

Swaraview

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-2

Port USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

  • Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
  • When the port is not in use, make sure to cover it and tighten the thumb screw.

Tombol Reset
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

Indikator LED

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-3

E-Port

For connecting compatible aircraft only.

Spesifikasi

Dolan maring ngisor iki websitus kanggo specifications.
https://enterprise.dji.com/manifold-3/specs

Instalasi

Installing on DJI Matrice 400

Dhaptar Alat (didol kanthi kapisah)

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-4

Nginstal
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-5 dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-6

Panganggone

Nganyari Firmware

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Make sure the computer is connected to the internet and the DJI device is powered on.
  3. Bukak DJI Assistant 2 lan mlebu nganggo akun DJI.
  4. Select the device and click Firmware Upgrade on the left side.
  5. Pilih versi perangkat kukuh lan klik kanggo nganyari. Perangkat kukuh bakal diundhuh lan dianyari kanthi otomatis.
  6. A prompt appears when the update is successful.
  • Users can also download the firmware package from the DJI official websitus kanggo nganyari offline. Bukak DJI Assistant 2 lan klik Update Offline. Pilih piranti lan paket perangkat kukuh, banjur tutul Mulai Nganyari.
  • The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

Dolan maring https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

Instal Aplikasi

  1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
  2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
  3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.
  • To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
  • To upgrade, follow the steps above to install the upgraded installation package.

Jalanake Aplikasi
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View ing kaca ngarep.

Antarmuka bisa beda-beda gumantung saka muatan sing diinstal. Mangga deleng antarmuka nyata.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-7

  1. After entering the camera view, tap … on the left side to view the installed applications.
  2. Tap the icon of the desired application to launch it. Users can view efek operasi ing kamera view.
    • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
    • Press and hold the application icon, then drag it to the function bar to pin it in the camera view kanggo akses gampang.

Aplikasi Ekspor Files

Using DJI Pilot 2

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Ekspor. Data kasebut files will be saved to the USB drive or hard drive.

Nggunakake DJI Assistant 2

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files kanggo ngekspor.

Ekspor Log

Ekspor Manifold 3 Log

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Bukak DJI Assistant 2 lan mlebu nganggo akun DJI.
  3. Select the device and click Log Export on the left side.
  4. Click the checkbox to select designated device logs.

Ekspor Log Aplikasi

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files bagean lan pilih log files kanggo ngekspor.

We are kene kanggo sampeyan

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-8

Kontak

Dhukungan DJI

Konten bisa diganti tanpa kabar sadurunge.

Download versi paling anyar saka

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-9https://enterprise.dji.com/manifold-3/downloads
Yen sampeyan duwe pitakonan babagan dokumen iki, hubungi DJI kanthi ngirim pesen menyang DocSupport@dji.com.

DJI lan MANIFOLD minangka merek dagang saka DJI. Hak Cipta © 2025 DJI Kabeh Hak Dilindungi.

Dokumen / Sumber Daya

dji Manifold 3 High Performance Onboard Komputasi Power Box [pdf] Manual pangguna
Manifold 3 High Performance Onboard Komputasi Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box

Referensi

Ninggalake komentar

Alamat email sampeyan ora bakal diterbitake. Kolom sing dibutuhake ditandhani *