ເນື້ອໃນ ເຊື່ອງ
1 DJI Manifold 3 High Performance Onboard Computing Power Box
2 ການນໍາໃຊ້ຄູ່ມືນີ້
3 ຜະລິດຕະພັນ Profile
4 ການຕິດຕັ້ງ
5 ການ​ນໍາ​ໃຊ້
6 ຕິດຕໍ່
7 ເອກະສານ / ຊັບພະຍາກອນ
7.1 ເອກະສານອ້າງອີງ

dji-ໂລໂກ້

DJI Manifold 3 High Performance Onboard Computing Power Box

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-product

ເອກະສານນີ້ຖືກລິຂະສິດໂດຍ DJI ສະຫງວນລິຂະສິດທັງຫມົດ. ເວັ້ນເສຍແຕ່ໄດ້ຮັບການອະນຸຍາດຈາກ DJI, ທ່ານບໍ່ມີສິດທີ່ຈະນໍາໃຊ້ຫຼືອະນຸຍາດໃຫ້ຜູ້ອື່ນນໍາໃຊ້ເອກະສານຫຼືພາກສ່ວນໃດຫນຶ່ງຂອງເອກະສານໂດຍການຜະລິດ, ໂອນຫຼືຂາຍເອກະສານ. ພຽງແຕ່ອ້າງອີງໃສ່ເອກະສານນີ້ແລະເນື້ອໃນຂອງມັນເປັນຄໍາແນະນໍາເພື່ອດໍາເນີນການຜະລິດຕະພັນ DJI. ເອກະສານດັ່ງກ່າວບໍ່ຄວນຖືກນໍາໃຊ້ເພື່ອຈຸດປະສົງອື່ນ.
ໃນ​ກໍ​ລະ​ນີ​ທີ່​ແຕກ​ຕ່າງ​ກັນ​ໃນ​ບັນ​ດາ​ສະ​ບັບ​ທີ່​ແຕກ​ຕ່າງ​ກັນ​, ສະ​ບັບ​ພາ​ສາ​ອັງ​ກິດ​ຈະ​ຊະ​ນະ​.

ຄົ້ນຫາຄໍາສໍາຄັນ
ຊອກຫາ ຄໍາສໍາຄັນເຊັ່ນ "ຫມໍ້ໄຟ" ແລະ "ຕິດຕັ້ງ" ເພື່ອຊອກຫາຫົວຂໍ້. ຖ້າ​ຫາກ​ວ່າ​ທ່ານ​ກໍາ​ລັງ​ໃຊ້ Adobe Acrobat Reader ເພື່ອ​ອ່ານ​ເອ​ກະ​ສານ​ນີ້​, ກົດ Ctrl + F ໃນ Windows ຫຼື Command + F ໃນ Mac ເພື່ອ​ເລີ່ມ​ຕົ້ນ​ການ​ຄົ້ນ​ຫາ​.

ການນໍາທາງໄປຫາຫົວຂໍ້ໃດຫນຶ່ງ
View ບັນຊີລາຍຊື່ຄົບຖ້ວນຂອງຫົວຂໍ້ໃນຕາຕະລາງເນື້ອໃນ. ຄລິກໃສ່ຫົວຂໍ້ໃດໜຶ່ງເພື່ອໄປຫາພາກສ່ວນນັ້ນ.

ການພິມເອກະສານນີ້
ເອກະສານນີ້ຮອງຮັບການພິມທີ່ມີຄວາມລະອຽດສູງ.

ການນໍາໃຊ້ຄູ່ມືນີ້

ນິທານ

  • ສຳຄັນ
  • ຄໍາແນະນໍາແລະຄໍາແນະນໍາ
  • ອ້າງອິງ

ວິດີໂອສອນສອນ

ໄປ​ທີ່​ທີ່​ຢູ່​ຂ້າງ​ລຸ່ມ​ນີ້​ຫຼື​ສະ​ແກນ​ລະ​ຫັດ QR ເພື່ອ​ເບິ່ງ​ວິ​ດີ​ໂອ​ການ​ສອນ​, ທີ່​ສາ​ທິດ​ການ​ນໍາ​ໃຊ້​ຜະ​ລິດ​ຕະ​ພັນ​ຢ່າງ​ປອດ​ໄພ​:

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-1https://enterprise.dji.com/manifold-3/video

ດາວໂຫລດຜູ້ຊ່ວຍ DJI 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.

ຜະລິດຕະພັນ Profile

ເກີນview

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-2

ພອດ USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

  • Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
  • When the port is not in use, make sure to cover it and tighten the thumb screw.

ປຸ່ມຣີເຊັດ
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

ຕົວຊີ້ວັດ LED

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-3

E-Port

For connecting compatible aircraft only.

ຂໍ້ມູນຈໍາເພາະ

ຢ້ຽມຢາມຕໍ່ໄປນີ້ webເວັບ​ໄຊ​ສໍາ​ລັບ​ການ​ສະ​ເພາະ​.
https://enterprise.dji.com/manifold-3/specs

ການຕິດຕັ້ງ

Installing on DJI Matrice 400

Tool List (sold separately)

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-4

ການຕິດຕັ້ງ
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-5 dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-6

ການ​ນໍາ​ໃຊ້

ອັບເດດເຟີມແວ

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Make sure the computer is connected to the internet and the DJI device is powered on.
  3. ເປີດໃຊ້ຜູ້ຊ່ວຍ DJI 2 ແລະເຂົ້າສູ່ລະບົບດ້ວຍບັນຊີ DJI.
  4. Select the device and click Firmware Upgrade on the left side.
  5. ເລືອກເວີຊັນເຟີມແວ ແລະຄລິກເພື່ອອັບເດດ. ເຟີມແວຈະຖືກດາວໂຫຼດ ແລະອັບເດດອັດຕະໂນມັດ.
  6. A prompt appears when the update is successful.
  • Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
  • The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

ຢ້ຽມຢາມ https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

ຕິດຕັ້ງແອັບພລິເຄຊັນ

  1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
  2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
  3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.
  • To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
  • To upgrade, follow the steps above to install the upgraded installation package.

ດໍາເນີນການຄໍາຮ້ອງສະຫມັກ
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View ຢູ່ໃນຫນ້າທໍາອິດ.

The interface may vary depending on the payload installed. Please refer to the actual interface.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-7

  1. After entering the camera view, tap … on the left side to view the installed applications.
  2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
    • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
    • Press and hold the application icon, then drag it to the function bar to pin it in the camera view ສໍາລັບການເຂົ້າເຖິງໄດ້ງ່າຍ.

Export Application Files

Using DJI Pilot 2

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Export. The data files will be saved to the USB drive or hard drive.

ການນໍາໃຊ້ຜູ້ຊ່ວຍ DJI 2

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files ເພື່ອສົ່ງອອກ.

ບັນທຶກການສົ່ງອອກ

Export Manifold 3 Logs

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. ເປີດໃຊ້ຜູ້ຊ່ວຍ DJI 2 ແລະເຂົ້າສູ່ລະບົບດ້ວຍບັນຊີ DJI.
  3. Select the device and click Log Export on the left side.
  4. Click the checkbox to select designated device logs.

Export Application Logs

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log files ເພື່ອສົ່ງອອກ.

ພວກເຮົາຢູ່ທີ່ນີ້ສໍາລັບທ່ານ

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-8

ຕິດຕໍ່

ສະ ໜັບ ສະ ໜູນ DJI

ເນື້ອຫາແມ່ນມີການປ່ຽນແປງໂດຍບໍ່ຕ້ອງແຈ້ງລ່ວງ ໜ້າ.

ດາວນ໌ໂຫລດສະບັບຫລ້າສຸດຈາກ

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-9https://enterprise.dji.com/manifold-3/downloads
ຖ້າເຈົ້າມີຄໍາຖາມອັນໃດກ່ຽວກັບເອກະສານນີ້, ຕິດຕໍ່ຫາ DJI ໂດຍການສົ່ງຂໍ້ຄວາມຫາ DocSupport@dji.com.

DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.

ເອກະສານ / ຊັບພະຍາກອນ

dji Manifold 3 High Performance Onboard Computing Power Box [pdf] ຄູ່ມືຜູ້ໃຊ້
Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box

ເອກະສານອ້າງອີງ

ອອກຄໍາເຫັນ

ທີ່ຢູ່ອີເມວຂອງເຈົ້າຈະບໍ່ຖືກເຜີຍແຜ່. ຊ່ອງຂໍ້ມູນທີ່ຕ້ອງການຖືກໝາຍໄວ້ *