DJI Manifold 3 High Performance Onboard Computing Power Box

Dan id-dokument għandu l-awtur tad-DJI bid-drittijiet kollha riżervati. Sakemm ma jkunx awtorizzat mod ieħor mid-DJI, m'intix eliġibbli biex tuża jew tħalli oħrajn jużaw id-dokument jew kwalunkwe parti mid-dokument billi tirriproduċi, tittrasferixxi jew tbigħ id-dokument. Irreferi biss għal dan id-dokument u l-kontenut tiegħu bħala struzzjonijiet biex tħaddem il-prodotti DJI. Id-dokument m'għandux jintuża għal skopijiet oħra.
F'każ ta' diverġenza bejn verżjonijiet differenti, il-verżjoni bl-Ingliż għandha tipprevali.

Tiftix għal Keywords
Fittex għal kliem kjavi bħal “batterija” u “installazzjoni” biex issib suġġett. Jekk qed tuża Adobe Acrobat Reader biex taqra dan id-dokument, agħfas Ctrl+F fuq Windows jew Command+F fuq Mac biex tibda tfittxija.

Navigazzjoni għal Suġġett
View lista kompluta ta’ suġġetti fil-werrej. Ikklikkja fuq suġġett biex tinnaviga għal dik it-taqsima.

Stampar ta' dan id-Dokument
Dan id-dokument jappoġġja stampar b'riżoluzzjoni għolja.

Uża dan il-Manwal

Leġġenda

• Importanti
• Ħjiel u Suġġerimenti
• Referenza

Tutorials tal-vidjo

Mur fl-indirizz hawn taħt jew skennja l-kodiċi QR biex tara l-vidjows tutorjali, li juru kif tuża l-prodott b'mod sikur:

https://enterprise.dji.com/manifold-3/video

Niżżel DJI Assistant 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Jappoġġja biss il-verżjoni tal-Windows.

Prodott Profile

Fuqview

Port USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

• Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
• When the port is not in use, make sure to cover it and tighten the thumb screw.

Irrisettja Buttuna
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

Indikatur LED

E-Port

For connecting compatible aircraft only.

Speċifikazzjonijiet

Żur dan li ġej websit għall-ispeċifikazzjonijiet.
https://enterprise.dji.com/manifold-3/specs

Installazzjoni

Installing on DJI Matrice 400

Lista tal-Għodda (tinbiegħ separatament)

Installazzjoni
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

Użu

Aġġornament tal-Firmware

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Make sure the computer is connected to the internet and the DJI device is powered on.
3. Ibda DJI Assistant 2 u illoggja b'kont DJI.
4. Select the device and click Firmware Upgrade on the left side.
5. Agħżel il-verżjoni tal-firmware u kklikkja biex taġġorna. Il-firmware se jitniżżel u jiġi aġġornat awtomatikament.
6. A prompt appears when the update is successful.

• Users can also download the firmware package from the DJI official websit għal aġġornament offline. Iftaħ DJI Assistant 2 u kklikkja Offline Update. Agħżel l-apparat u l-pakkett tal-firmware, imbagħad tektek Start Update.
• The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

Żur https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

Installa l-Applikazzjoni

1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.

• To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
• To upgrade, follow the steps above to install the upgraded installation package.

Mexxi l-Applikazzjoni
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View fuq il-paġna ewlenija.

L-interfaċċja tista' tvarja skont il-payload installat. Jekk jogħġbok irreferi għall-interfaċċja attwali.

1. After entering the camera view, tap … on the left side to view the installed applications.
2. Tap the icon of the desired application to launch it. Users can view l-effetti tal-operazzjoni fil-kamera view.
   • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
   • Press and hold the application icon, then drag it to the function bar to pin it in the camera view għal aċċess faċli.

Applikazzjoni għall-Esportazzjoni Files

Using DJI Pilot 2

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Esportazzjoni. Id-dejta files will be saved to the USB drive or hard drive.

Uża DJI Assistant 2

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files għall-esportazzjoni.

Esportazzjoni Zkuk

Esportazzjoni tal-Manifold 3 Logs

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Ibda DJI Assistant 2 u illoggja b'kont DJI.
3. Select the device and click Log Export on the left side.
4. Click the checkbox to select designated device logs.

Esporta r-Reġistri tal-Applikazzjoni

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Filetaqsima s u agħżel il-log files għall-esportazzjoni.

AĦNA HAWN GĦALIK

Kuntatt

APPOĠĠ DJI

Il-kontenut huwa soġġett għal bidla mingħajr avviż minn qabel.

Niżżel l-aħħar verżjoni minn

https://enterprise.dji.com/manifold-3/downloads
Jekk għandek xi mistoqsijiet dwar dan id-dokument, ikkuntattja lil DJI billi tibgħat messaġġ lil DocSupport@dji.com.

DJI u MANIFOLD huma trejdmarks ta' DJI. Drittijiet tal-awtur © 2025 DJI Id-Drittijiet kollha Riżervati.

Dokumenti / Riżorsi

Kaxxa tal-Enerġija tal-Kompjuter Abbord ta' Prestazzjoni Għolja dji Manifold 3 [pdfManwal tal-Utent Manifold 3 Power Box tal-Kompjuter Abbord ta' Prestazzjoni Għolja, Power Box tal-Kompjuter Abbord ta' Prestazzjoni, Power Box tal-Kompjuter Abbord, Power Box tal-Kompjuter, Power Box

Referenzi

• Manwal għall-Utent