Manifold 3 ប្រអប់ថាមពលកុំព្យូទ័រដំណើរការខ្ពស់
“
លក្ខណៈបច្ចេកទេស
សម្រាប់ព័ត៌មានលម្អិត សូមចូលទៅកាន់ នៅទីនេះ.
ផលិតផលគាំទ្រfile
1. លើសview
The Manifold 3 is a versatile device designed to enhance the
functionality of compatible DJI aircraft.
1.1 លក្ខណៈពិសេស
- រន្ធ USB-C៖ Supports connecting USB 3.0
devices (e.g., docking stations, USB drives). - ប៊ូតុងកំណត់ឡើងវិញ៖ ចុចហើយសង្កត់រយៈពេល ១០ វិនាទីទៅ
ស្តារការកំណត់រោងចក្រឡើងវិញ។ - សូចនាករ LED៖
- Solid green: Starting up/Working normally/Update Complete
- Blinks green slowly: System overheating, working at reduced
ប្រេកង់ - Blinks yellow slowly: Updating firmware
- Blinks yellow quickly: Update failed
- Blinks red slowly: Restoring factory settings
- Blinks blue quickly: Unknown status
- E-Port: For connecting compatible aircraft
តែប៉ុណ្ណោះ។
ការដំឡើង
2.1 Installing on DJI Matrice 400
Tool List (sold separately):
- តង្កៀបម៉ោន
- ខ្សែ coaxial
- Screws and Tools (1.5mm, 2mm, 2.5mm)
ការដំឡើង៖ Follow the diagram for installation
and connection. The device can only connect to the aircraft’s
E1/E2/E3 ports. It is recommended to connect to the E3 port.
ការប្រើប្រាស់
៣.១១ ការធ្វើបច្ចុប្បន្នភាពកម្មវិធីបង្កប់
- Connect Manifold 3 to the aircraft, then connect the aircraft
ទៅកុំព្យូទ័រ។ - Ensure the computer is connected to the internet and the DJI
device is powered.
3.2 Manifold Application
Install the Application:
- Download and install DJI Assistant 2 (Enterprise Series) from
នៅទីនេះ. - * Only supports the Windows version.
Run the Application:
Launch the installed DJI Assistant 2 software to run the
Manifold application.
Export Application Files:
Follow the instructions within the application to export files
តាមតម្រូវការ។
3.3 នាំចេញកំណត់ហេតុ
Export Manifold 3 Logs:
Access the appropriate menu within the application to export
logs related to the Manifold 3 device.
Export Application Logs:
Similarly, export logs specific to the application being used on
the Manifold 3 device.
សំណួរគេសួរញឹកញាប់
Q: Can I connect a computer directly to the USB-C port?
A: No, the USB-C port is for connecting USB 3.0 devices such as
docking stations and USB drives, not for direct computer
ការតភ្ជាប់។
Q: How do I restore factory settings on the Manifold 3?
A: Press and hold the Reset Button for 10 seconds to restore
factory settings, which will erase installed applications and all
ទិន្នន័យ។
“`
សៀវភៅណែនាំអ្នកប្រើប្រាស់
v1.0 2025.07
ឯកសារនេះត្រូវបានរក្សាសិទ្ធិដោយ DJI ដោយរក្សាសិទ្ធិគ្រប់យ៉ាង។ លុះត្រាតែមានការអនុញ្ញាតពី DJI អ្នកមិនមានសិទ្ធិប្រើប្រាស់ ឬអនុញ្ញាតឱ្យអ្នកដទៃប្រើប្រាស់ឯកសារ ឬផ្នែកណាមួយនៃឯកសារដោយការផលិតឡើងវិញ ផ្ទេរ ឬលក់ឯកសារនោះទេ។ យោងទៅលើឯកសារនេះនិងខ្លឹមសាររបស់វាជាការណែនាំសម្រាប់ដំណើរការផលិតផល DJI ប៉ុណ្ណោះ។ ឯកសារមិនគួរប្រើសម្រាប់គោលបំណងផ្សេងទៀតទេ។
នៅក្នុងព្រឹត្តិការណ៍នៃភាពខុសគ្នាក្នុងចំណោមកំណែផ្សេងៗគ្នា កំណែជាភាសាអង់គ្លេសត្រូវមាន។
ការស្វែងរកពាក្យគន្លឹះ ស្វែងរក ពាក្យគន្លឹះដូចជា "ថ្ម" និង "ដំឡើង" ដើម្បីស្វែងរកប្រធានបទ។ ប្រសិនបើអ្នកកំពុងប្រើ Adobe Acrobat Reader ដើម្បីអានឯកសារនេះ សូមចុច Ctrl+F នៅលើ Windows ឬ Command+F នៅលើ Mac ដើម្បីចាប់ផ្តើមការស្វែងរក។
ការរុករកទៅប្រធានបទមួយ។ View បញ្ជីពេញលេញនៃប្រធានបទនៅក្នុងតារាងមាតិកា។ ចុចលើប្រធានបទដើម្បីរុករកទៅផ្នែកនោះ។
ការបោះពុម្ពឯកសារនេះ ឯកសារនេះគាំទ្រការបោះពុម្ពដែលមានគុណភាពបង្ហាញខ្ពស់។
ដោយប្រើសៀវភៅណែនាំនេះ។
រឿងព្រេង
សំខាន់
គន្លឹះ និងគន្លឹះ
ឯកសារយោង
ការបង្រៀនវីដេអូ
សូមចូលទៅកាន់អាសយដ្ឋានខាងក្រោម ឬស្កេនកូដ QR ដើម្បីមើលវីដេអូបង្រៀន ដែលបង្ហាញពីរបៀបប្រើប្រាស់ផលិតផលដោយសុវត្ថិភាព៖
2 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual https://enterprise.dji.com/manifold-3/video
ទាញយក DJI Assistant 2
Download and install DJI ASSISTANTTM 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.
3 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
មាតិកា
ដោយប្រើសៀវភៅណែនាំនេះ។
2
រឿងព្រេង
2
ការបង្រៀនវីដេអូ
2
ទាញយក DJI Assistant 2
3
1 ផលិតផល Profile
5
1.1 លើសview
5
1.2 លក្ខណៈពិសេស
6
2 ការដំឡើង
7
2.1 Installing on DJI Matrice 400
7
3 ការប្រើប្រាស់
9
៣.១១ ការធ្វើបច្ចុប្បន្នភាពកម្មវិធីបង្កប់
9
3.2 Manifold Application
9
ដំឡើងកម្មវិធី
9
ដំណើរការកម្មវិធី
10
Export Application Files
11
3.3 នាំចេញកំណត់ហេតុ
11
Export Manifold 3 Logs
11
Export Application Logs
11
4 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
1 ផលិតផល Profile
1.1 លើសview
Manifold 3 User Manual
12
3
4
1. USB-C Port It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.
· Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
· When the port is not in use, make sure to cover it and tighten the thumb screw.
2. Reset Button Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.
3. សូចនាករ LED
Solid green Blinks green slowly Blinks yellow slowly
Blinks yellow quickly Blinks red slowly Blinks blue quickly 4. E-Port For connecting compatible aircraft only.
Starting up Working normally/Update Complete System overheating, working at reduced frequency Updating firmware Update failed Restoring factory settings
5 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
1.2 លក្ខណៈពិសេស
ទស្សនាដូចតទៅ website for specifications. https://enterprise.dji.com/manifold-3/specs
6 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
2 ការដំឡើង
2.1 Installing on DJI Matrice 400
Tool List (sold separately)
តង្កៀបម៉ោន
ខ្សែ coaxial
វីសនិងឧបករណ៍
1.5 ម។
2 មម 2.5 ម។
Installing Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.
1
3
2
2
7 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
1
2
4
3
3
8 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
3 ការប្រើប្រាស់
៣.១១ ការធ្វើបច្ចុប្បន្នភាពកម្មវិធីបង្កប់
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Make sure the computer is connected to the internet and the DJI device is powered
on. 3. Launch DJI Assistant 2 and log in with a DJI account. 4. Select the device and click Firmware Upgrade on the left side. 5. Select the firmware version and click to update. The firmware will be downloaded and
updated automatically. 6. A prompt appears when the update is successful.
· Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
· The update will take a while. Wait patiently until it finishes.
3.2 Manifold Application
Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.
Visit https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.
ដំឡើងកម្មវិធី
1. Copy the installation package with the .dpk extension to the remote controller’s builtin storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management. 3. Tap the “+” in the upper right corner, and select the installation package file សម្រាប់
installation. Successfully installed applications will be displayed on the Application Management page.
9 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
· To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
· To upgrade, follow the steps above to install the upgraded installation package.
ដំណើរការកម្មវិធី
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View នៅលើទំព័រដើម។
The interface may vary depending on the payload installed. Please refer to the actual interface.
2
1
1. After entering the camera view, tap applications.
on the left side to view the installed
2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
· Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
· Press and hold the application icon, then drag it to the function bar to pin it in the camera view សម្រាប់ភាពងាយស្រួល។
10 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
Manifold 3 User Manual
Export Application Files
Using DJI Pilot 2 1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive
to Manifold 3’s USB-C port. 2. Launch DJI Pilot 2 and enter Application Management page, then select the desired
application and tap File Export. The data files will be saved to the USB drive or hard drive. Using DJI Assistant 2 1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files ដើម្បីនាំចេញ។
3.3 Export Logs Export Manifold 3 Logs
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2 and log in with a DJI account. 3. Select the device and click Log Export on the left side. 4. Click the checkbox to select designated device logs.
Export Application Logs
1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive. When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log files ដើម្បីនាំចេញ។
11 © 2025 DJI រក្សាសិទ្ធិគ្រប់យ៉ាង។
យើងនៅទីនេះសម្រាប់អ្នក ទាក់ទង DJI SUPPORT
The content is subject to change without prior notice. Download the latest version from
https://enterprise.dji.com/manifold-3/downloads If you have any questions about this document, contact DJI by sending a message to DocSupport@dji.com.
DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.
ឯកសារ/ធនធាន
 |
dji Manifold 3 High Performance Onboard Computing Power Box [pdf] សៀវភៅណែនាំអ្នកប្រើប្រាស់ Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box |