Manifold 3 High Performance Onboard Computing Power Box
“
Awọn pato
For detailed specifications, visit Nibi.
Ọja Profile
1. Ti pariview
The Manifold 3 is a versatile device designed to enhance the
functionality of compatible DJI aircraft.
1.1 Awọn pato
- Ibudo USB-C: Supports connecting USB 3.0
devices (e.g., docking stations, USB drives). - Bọtini atunto: Tẹ mọlẹ fun awọn aaya 10 si
mu pada factory eto. - Atọka LED:
- Solid green: Starting up/Working normally/Update Complete
- Blinks green slowly: System overheating, working at reduced
igbohunsafẹfẹ - Blinks yellow slowly: Updating firmware
- Blinks yellow quickly: Update failed
- Blinks red slowly: Restoring factory settings
- Blinks blue quickly: Unknown status
- E-Port: For connecting compatible aircraft
nikan.
Fifi sori ẹrọ
2.1 Installing on DJI Matrice 400
Tool List (sold separately):
- Oke Atẹgun
- Okun Coaxial
- Screws and Tools (1.5mm, 2mm, 2.5mm)
Fifi sori ẹrọ: Follow the diagram for installation
and connection. The device can only connect to the aircraft’s
E1/E2/E3 ports. It is recommended to connect to the E3 port.
Lilo
3.1 Imudojuiwọn Famuwia
- Connect Manifold 3 to the aircraft, then connect the aircraft
si kọmputa kan. - Ensure the computer is connected to the internet and the DJI
device is powered.
3.2 Manifold Application
Install the Application:
- Download and install DJI Assistant 2 (Enterprise Series) from
Nibi. - * Only supports the Windows version.
Run the Application:
Launch the installed DJI Assistant 2 software to run the
Manifold application.
Export Application Files:
Follow the instructions within the application to export files
bi o ti nilo.
3.3 okeere Log
Export Manifold 3 Logs:
Access the appropriate menu within the application to export
logs related to the Manifold 3 device.
Export Application Logs:
Similarly, export logs specific to the application being used on
the Manifold 3 device.
FAQ
Q: Can I connect a computer directly to the USB-C port?
A: No, the USB-C port is for connecting USB 3.0 devices such as
docking stations and USB drives, not for direct computer
asopọ.
Q: How do I restore factory settings on the Manifold 3?
A: Press and hold the Reset Button for 10 seconds to restore
factory settings, which will erase installed applications and all
data.
“`
Itọsọna olumulo
v1.0 2025.07
Iwe yi jẹ aṣẹ lori ara nipasẹ DJI pẹlu gbogbo awọn ẹtọ wa ni ipamọ. Ayafi bibẹẹkọ ti a fun ni aṣẹ nipasẹ DJI, iwọ ko ni ẹtọ lati lo tabi gba awọn miiran laaye lati lo iwe-ipamọ tabi apakan eyikeyi ti iwe-ipamọ nipasẹ atunkọ, gbigbe tabi ta iwe naa. Tọkasi iwe-ipamọ nikan ati akoonu rẹ bi awọn itọnisọna lati ṣiṣẹ awọn ọja DJI. Iwe naa ko yẹ ki o lo fun awọn idi miiran.
Ni iṣẹlẹ ti iyatọ laarin awọn ẹya oriṣiriṣi, ẹya Gẹẹsi yoo bori.
Wiwa fun Awọn Koko-ọrọ Wa fun awọn koko-ọrọ bii “batiri” ati “fi sori ẹrọ” lati wa koko kan. Ti o ba nlo Adobe Acrobat Reader lati ka iwe yii, tẹ Ctrl + F lori Windows tabi Command + F lori Mac lati bẹrẹ wiwa kan.
Lilọ kiri si Koko-ọrọ kan View atokọ pipe ti awọn koko-ọrọ ninu tabili awọn akoonu. Tẹ koko-ọrọ kan lati lọ kiri si apakan yẹn.
Titẹ sita Iwe yii Iwe yii ṣe atilẹyin titẹjade ipinnu giga.
Lilo Itọsọna yii
Àlàyé
Pataki
Italolobo ati Tips
Itọkasi
Video Tutorials
Lọ si adirẹsi ti o wa ni isalẹ tabi ṣayẹwo koodu QR lati wo awọn fidio ikẹkọ, eyiti o ṣe afihan bi o ṣe le lo ọja naa lailewu:
2 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual https://enterprise.dji.com/manifold-3/video
Ṣe igbasilẹ Iranlọwọ DJI 2
Download and install DJI ASSISTANTTM 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.
3 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
Awọn akoonu
Lilo Itọsọna yii
2
Àlàyé
2
Video Tutorials
2
Ṣe igbasilẹ Iranlọwọ DJI 2
3
1 ọja Profile
5
1.1 Ipariview
5
1.2 Awọn pato
6
2 fifi sori ẹrọ
7
2.1 Installing on DJI Matrice 400
7
3 Lilo
9
3.1 Imudojuiwọn Famuwia
9
3.2 Manifold Application
9
Fi ohun elo sii
9
Ṣiṣe Ohun elo naa
10
Export Application Files
11
3.3 okeere Log
11
Export Manifold 3 Logs
11
Export Application Logs
11
4 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
1 ọja Profile
1.1 Ipariview
Manifold 3 User Manual
12
3
4
1. USB-C Port It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.
· Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
· When the port is not in use, make sure to cover it and tighten the thumb screw.
2. Reset Button Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.
3. LED Atọka
Solid green Blinks green slowly Blinks yellow slowly
Blinks yellow quickly Blinks red slowly Blinks blue quickly 4. E-Port For connecting compatible aircraft only.
Starting up Working normally/Update Complete System overheating, working at reduced frequency Updating firmware Update failed Restoring factory settings
5 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
1.2 Awọn pato
Ṣabẹwo si atẹle naa website for specifications. https://enterprise.dji.com/manifold-3/specs
6 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
2 fifi sori ẹrọ
2.1 Installing on DJI Matrice 400
Tool List (sold separately)
Oke Atẹgun
Okun Coaxial
Awọn skru ati Awọn irinṣẹ
1.5mm
2mm 2.5mm
Installing Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.
1
3
2
2
7 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
1
2
4
3
3
8 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
3 Lilo
3.1 Imudojuiwọn Famuwia
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Make sure the computer is connected to the internet and the DJI device is powered
on. 3. Launch DJI Assistant 2 and log in with a DJI account. 4. Select the device and click Firmware Upgrade on the left side. 5. Select the firmware version and click to update. The firmware will be downloaded and
updated automatically. 6. A prompt appears when the update is successful.
· Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
· The update will take a while. Wait patiently until it finishes.
3.2 Manifold Application
Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.
Visit https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.
Fi ohun elo sii
1. Copy the installation package with the .dpk extension to the remote controller’s builtin storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management. 3. Tap the “+” in the upper right corner, and select the installation package file fun
installation. Successfully installed applications will be displayed on the Application Management page.
9 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
· To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
· To upgrade, follow the steps above to install the upgraded installation package.
Ṣiṣe Ohun elo naa
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View lori oju-iwe ile.
The interface may vary depending on the payload installed. Please refer to the actual interface.
2
1
1. After entering the camera view, tap applications.
on the left side to view the installed
2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
· Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
· Press and hold the application icon, then drag it to the function bar to pin it in the camera view fun rorun wiwọle.
10 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
Manifold 3 User Manual
Export Application Files
Using DJI Pilot 2 1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive
to Manifold 3’s USB-C port. 2. Launch DJI Pilot 2 and enter Application Management page, then select the desired
application and tap File Export. The data files will be saved to the USB drive or hard drive. Using DJI Assistant 2 1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files lati okeere.
3.3 Export Logs Export Manifold 3 Logs
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2 and log in with a DJI account. 3. Select the device and click Log Export on the left side. 4. Click the checkbox to select designated device logs.
Export Application Logs
1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive. When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log files lati okeere.
11 © 2025 DJI Gbogbo Awọn Ẹtọ Wa Ni Ipamọ.
A WA NIBI FUN O Kan si atilẹyin DJI
The content is subject to change without prior notice. Download the latest version from
https://enterprise.dji.com/manifold-3/downloads If you have any questions about this document, contact DJI by sending a message to DocSupport@dji.com.
DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.
Awọn iwe aṣẹ / Awọn orisun
 |
dji Manifold 3 High Performance Onboard Computing Power Box [pdf] Afowoyi olumulo Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box |