Manifold 3 High Performance Onboard Computing Power Box
“
Specifications
For detailed specifications, visit here.
Product Profile
1. Overview
The Manifold 3 is a versatile device designed to enhance the
functionality of compatible DJI aircraft.
1.1 Specifications
- USB-C Port: Supports connecting USB 3.0
devices (e.g., docking stations, USB drives). - Reset Button: Press and hold for 10 seconds to
restore factory settings. - LED Indicator:
- Solid green: Starting up/Working normally/Update Complete
- Blinks green slowly: System overheating, working at reduced
frequency - Blinks yellow slowly: Updating firmware
- Blinks yellow quickly: Update failed
- Blinks red slowly: Restoring factory settings
- Blinks blue quickly: Unknown status
- E-Port: For connecting compatible aircraft
only.
Installation
2.1 Installing on DJI Matrice 400
Tool List (sold separately):
- Mounting Bracket
- Coaxial Cable
- Screws and Tools (1.5mm, 2mm, 2.5mm)
Installing: Follow the diagram for installation
and connection. The device can only connect to the aircraft’s
E1/E2/E3 ports. It is recommended to connect to the E3 port.
Usage
3.1 Firmware Update
- Connect Manifold 3 to the aircraft, then connect the aircraft
to a computer. - Ensure the computer is connected to the internet and the DJI
device is powered.
3.2 Manifold Application
Install the Application:
- Download and install DJI Assistant 2 (Enterprise Series) from
here. - * Only supports the Windows version.
Run the Application:
Launch the installed DJI Assistant 2 software to run the
Manifold application.
Export Application Files:
Follow the instructions within the application to export files
as needed.
3.3 Export Logs
Export Manifold 3 Logs:
Access the appropriate menu within the application to export
logs related to the Manifold 3 device.
Export Application Logs:
Similarly, export logs specific to the application being used on
the Manifold 3 device.
FAQ
Q: Can I connect a computer directly to the USB-C port?
A: No, the USB-C port is for connecting USB 3.0 devices such as
docking stations and USB drives, not for direct computer
connection.
Q: How do I restore factory settings on the Manifold 3?
A: Press and hold the Reset Button for 10 seconds to restore
factory settings, which will erase installed applications and all
data.
“`
User Manual
v1.0 2025.07
This document is copyrighted by DJI with all rights reserved. Unless otherwise authorized by DJI, you are not eligible to use or allow others to use the document or any part of the document by reproducing, transferring or selling the document. Only refer to this document and the content thereof as instructions to operate DJI products. The document should not be used for other purposes.
In the event of divergence among different versions, the English version shall prevail.
Searching for Keywords Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to begin a search.
Navigating to a Topic View a complete list of topics in the table of contents. Click on a topic to navigate to that section.
Printing this Document This document supports high resolution printing.
Using this Manual
Legend
Important
Hints and Tips
Reference
Video Tutorials
Go to the address below or scan the QR code to watch the tutorial videos, which demonstrate how to use the product safely:
2 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual https://enterprise.dji.com/manifold-3/video
Download DJI Assistant 2
Download and install DJI ASSISTANTTM 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.
3 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
Contents
Using this Manual
2
Legend
2
Video Tutorials
2
Download DJI Assistant 2
3
1 Product Profile
5
1.1 Overview
5
1.2 Specifications
6
2 Installation
7
2.1 Installing on DJI Matrice 400
7
3 Usage
9
3.1 Firmware Update
9
3.2 Manifold Application
9
Install the Application
9
Run the Application
10
Export Application Files
11
3.3 Export Logs
11
Export Manifold 3 Logs
11
Export Application Logs
11
4 © 2025 DJI All Rights Reserved.
1 Product Profile
1.1 Overview
Manifold 3 User Manual
12
3
4
1. USB-C Port It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.
· Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
· When the port is not in use, make sure to cover it and tighten the thumb screw.
2. Reset Button Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.
3. LED Indicator
Solid green Blinks green slowly Blinks yellow slowly
Blinks yellow quickly Blinks red slowly Blinks blue quickly 4. E-Port For connecting compatible aircraft only.
Starting up Working normally/Update Complete System overheating, working at reduced frequency Updating firmware Update failed Restoring factory settings
5 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
1.2 Specifications
Visit the following website for specifications. https://enterprise.dji.com/manifold-3/specs
6 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
2 Installation
2.1 Installing on DJI Matrice 400
Tool List (sold separately)
Mounting Bracket
Coaxial Cable
Screws and Tools
1.5mm
2mm 2.5mm
Installing Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.
1
3
2
2
7 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
1
2
4
3
3
8 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
3 Usage
3.1 Firmware Update
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Make sure the computer is connected to the internet and the DJI device is powered
on. 3. Launch DJI Assistant 2 and log in with a DJI account. 4. Select the device and click Firmware Upgrade on the left side. 5. Select the firmware version and click to update. The firmware will be downloaded and
updated automatically. 6. A prompt appears when the update is successful.
· Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
· The update will take a while. Wait patiently until it finishes.
3.2 Manifold Application
Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.
Visit https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.
Install the Application
1. Copy the installation package with the .dpk extension to the remote controller’s builtin storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management. 3. Tap the “+” in the upper right corner, and select the installation package file for
installation. Successfully installed applications will be displayed on the Application Management page.
9 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
· To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
· To upgrade, follow the steps above to install the upgraded installation package.
Run the Application
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View on the home page.
The interface may vary depending on the payload installed. Please refer to the actual interface.
2
1
1. After entering the camera view, tap applications.
on the left side to view the installed
2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
· Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
· Press and hold the application icon, then drag it to the function bar to pin it in the camera view for easy access.
10 © 2025 DJI All Rights Reserved.
Manifold 3 User Manual
Export Application Files
Using DJI Pilot 2 1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive
to Manifold 3’s USB-C port. 2. Launch DJI Pilot 2 and enter Application Management page, then select the desired
application and tap File Export. The data files will be saved to the USB drive or hard drive. Using DJI Assistant 2 1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files to export.
3.3 Export Logs Export Manifold 3 Logs
1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer. 2. Launch DJI Assistant 2 and log in with a DJI account. 3. Select the device and click Log Export on the left side. 4. Click the checkbox to select designated device logs.
Export Application Logs
1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive. When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log files to export.
11 © 2025 DJI All Rights Reserved.
WE ARE HERE FOR YOU Contact DJI SUPPORT
The content is subject to change without prior notice. Download the latest version from
https://enterprise.dji.com/manifold-3/downloads If you have any questions about this document, contact DJI by sending a message to DocSupport@dji.com.
DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.
Documents / Resources
 |
dji Manifold 3 High Performance Onboard Computing Power Box [pdf] User Manual Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box |