DJI Manifold 3 High Performance Onboard Computing Power Box

Este documento ten copyright de DJI con todos os dereitos reservados. A non ser que DJI autorice o contrario, non podes usar nin permitir que outros utilicen o documento ou calquera parte do documento reproducindo, transferindo ou vendendo o documento. Consulte este documento e o seu contido só como instrucións para utilizar os produtos DJI. O documento non debe utilizarse para outros fins.
En caso de diverxencia entre as distintas versións, prevalecerá a versión inglesa.

Buscando palabras clave
Busca palabras clave como “batería” e “instalar” para atopar un tema. Se estás a usar Adobe Acrobat Reader para ler este documento, preme Ctrl+F en Windows ou Comando+F en Mac para iniciar unha busca.

Navegando a un tema
View unha lista completa de temas na táboa de contidos. Fai clic nun tema para navegar ata esa sección.

Imprimir este documento
Este documento admite a impresión de alta resolución.

Usando este Manual

Lenda

• Importante
• Consellos e consellos
• Referencia

Videotutoriais

Vaia ao seguinte enderezo ou escanee o código QR para ver os vídeos titoriales, que mostran como usar o produto de forma segura:

https://enterprise.dji.com/manifold-3/video

Descargar DJI Assistant 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.

Produto Profile

Acabadoview

Porto USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

• Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
• When the port is not in use, make sure to cover it and tighten the thumb screw.

Botón de reinicio
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

Indicador LED

Porto electrónico

For connecting compatible aircraft only.

Especificacións

Visita o seguinte websitio para especificacións.
https://enterprise.dji.com/manifold-3/specs

Instalación

Installing on DJI Matrice 400

Tool List (sold separately)

Instalación
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

Uso

Actualización de firmware

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Make sure the computer is connected to the internet and the DJI device is powered on.
3. Inicie DJI Assistant 2 e inicie sesión cunha conta DJI.
4. Select the device and click Firmware Upgrade on the left side.
5. Seleccione a versión do firmware e prema para actualizar. O firmware descargarase e actualizarase automaticamente.
6. A prompt appears when the update is successful.

• Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
• The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

Visita https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

Instala a aplicación

1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.

• To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
• To upgrade, follow the steps above to install the upgraded installation package.

Executar a Aplicación
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View na páxina de inicio.

The interface may vary depending on the payload installed. Please refer to the actual interface.

1. After entering the camera view, tap … on the left side to view the installed applications.
2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
   • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
   • Press and hold the application icon, then drag it to the function bar to pin it in the camera view para un fácil acceso.

Export Application Files

Using DJI Pilot 2

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Export. The data files will be saved to the USB drive or hard drive.

Usando DJI Assistant 2

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files para exportar.

Exportar rexistros

Export Manifold 3 Logs

1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
2. Inicie DJI Assistant 2 e inicie sesión cunha conta DJI.
3. Select the device and click Log Export on the left side.
4. Click the checkbox to select designated device logs.

Export Application Logs

1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log files para exportar.

ESTAMOS AQUÍ PARA TI

Contacto

APOIO DJI

O contido está suxeito a cambios sen previo aviso.

Descarga a última versión de

https://enterprise.dji.com/manifold-3/downloads
Se tes algunha dúbida sobre este documento, ponte en contacto con DJI enviando unha mensaxe a DocSupport@dji.com.

DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.

Documentos/Recursos

dji Manifold 3 High Performance Onboard Computing Power Box [pdfManual do usuario Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box

Referencias

• Manual de usuario