Cynnwys cuddio
1 DJI Manifold 3 High Performance Onboard Computing Power Box
2 Gan ddefnyddio'r Llawlyfr hwn
3 Cynnyrch Profile
4 Gosodiad
5 Defnydd
6 Cysylltwch
7 Dogfennau / Adnoddau
7.1 Cyfeiriadau

dj-logo

DJI Manifold 3 High Performance Onboard Computing Power Box

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-product

Mae hawlfraint y ddogfen hon gan DJI a chedwir pob hawl. Oni bai yr awdurdodir yn wahanol gan DJI, nid ydych yn gymwys i ddefnyddio neu ganiatáu i eraill ddefnyddio'r ddogfen neu unrhyw ran o'r ddogfen trwy atgynhyrchu, trosglwyddo neu werthu'r ddogfen. Dim ond fel cyfarwyddiadau i weithredu cynhyrchion DJI y cyfeiriwch at y ddogfen hon a'i chynnwys. Ni ddylid defnyddio'r ddogfen at unrhyw ddibenion eraill.
Os bydd gwahaniaeth rhwng gwahanol fersiynau, y fersiwn Saesneg fydd drechaf.

Chwilio am Allweddeiriau
Chwiliwch am allweddeiriau fel “batri” a “gosod” i ddod o hyd i bwnc. Os ydych chi'n defnyddio Adobe Acrobat Reader i ddarllen y ddogfen hon, pwyswch Ctrl+F ar Windows neu Command+F ar Mac i ddechrau chwiliad.

Llywio i Bwnc
View rhestr gyflawn o bynciau yn y tabl cynnwys. Cliciwch ar bwnc i lywio i'r adran honno.

Argraffu'r Ddogfen hon
Mae'r ddogfen hon yn cefnogi argraffu cydraniad uchel.

Gan ddefnyddio'r Llawlyfr hwn

Chwedl

  • Pwysig
  • Awgrymiadau a Chynghorion
  • Cyfeiriad

Tiwtorialau Fideo

Ewch i'r cyfeiriad isod neu sganiwch y cod QR i wylio'r fideos tiwtorial, sy'n dangos sut i ddefnyddio'r cynnyrch yn ddiogel:

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-1https://enterprise.dji.com/manifold-3/video

Lawrlwythwch Cynorthwyydd DJI 2

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Dim ond y fersiwn Windows yn cael ei gefnogi.

Cynnyrch Profile

Drosoddview

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-2

Porthladd USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

  • Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
  • When the port is not in use, make sure to cover it and tighten the thumb screw.

Botwm Ailosod
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

Dangosydd LED

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-3

E-Borth

For connecting compatible aircraft only.

Manylebau

Ymwelwch â'r canlynol websafle ar gyfer manylebau.
https://enterprise.dji.com/manifold-3/specs

Gosodiad

Installing on DJI Matrice 400

Rhestr Offer (wedi'i gwerthu ar wahân)

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-4

Gosod
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-5 dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-6

Defnydd

Diweddariad Firmware

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Make sure the computer is connected to the internet and the DJI device is powered on.
  3. Lansio Cynorthwy-ydd DJI 2 a mewngofnodi gyda chyfrif DJI.
  4. Select the device and click Firmware Upgrade on the left side.
  5. Dewiswch y fersiwn firmware a chliciwch i ddiweddaru. Bydd y firmware yn cael ei lawrlwytho a'i ddiweddaru'n awtomatig.
  6. A prompt appears when the update is successful.
  • Users can also download the firmware package from the DJI official websafle ar gyfer diweddariad all-lein. Lansiwch DJI Assistant 2 a chliciwch ar Ddiweddariad All-lein. Dewiswch y ddyfais a'r pecyn cadarnwedd, yna tapiwch Dechrau Diweddariad.
  • The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

Ymwelwch https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

Gosod y Cais

  1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
  2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
  3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.
  • To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
  • To upgrade, follow the steps above to install the upgraded installation package.

Rhedeg y Cais
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View ar yr hafan.

Gall y rhyngwyneb amrywio yn dibynnu ar y llwyth tâl sydd wedi'i osod. Cyfeiriwch at y rhyngwyneb gwirioneddol.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-7

  1. After entering the camera view, tap … on the left side to view the installed applications.
  2. Tap the icon of the desired application to launch it. Users can view effeithiau'r llawdriniaeth yn y camera view.
    • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
    • Press and hold the application icon, then drag it to the function bar to pin it in the camera view ar gyfer mynediad hawdd.

Cais Allforio Files

Using DJI Pilot 2

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Allforio. Y data files will be saved to the USB drive or hard drive.

Defnyddio Cynorthwy-ydd DJI 2

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files i allforio.

Logiau Allforio

Allforio Logiau Manifold 3

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Lansio Cynorthwy-ydd DJI 2 a mewngofnodi gyda chyfrif DJI.
  3. Select the device and click Log Export on the left side.
  4. Click the checkbox to select designated device logs.

Allforio Logiau Cymwysiadau

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Fileadran s a dewis y log files i allforio.

RYDYM YMA I CHI

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-8

Cysylltwch

CEFNOGAETH DJI

Gall y cynnwys newid heb rybudd ymlaen llaw.

Lawrlwythwch y fersiwn diweddaraf o

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-9https://enterprise.dji.com/manifold-3/downloads
Os oes gennych unrhyw gwestiynau am y ddogfen hon, cysylltwch â DJI trwy anfon neges at DocSupport@dji.com.

Mae DJI a MANIFOLD yn nodau masnach DJI. Hawlfraint © 2025 Cedwir Pob Hawl DJI.

Dogfennau / Adnoddau

Blwch Pŵer Cyfrifiadura Ar y Bwrdd Perfformiad Uchel dji Manifold 3 [pdfLlawlyfr Defnyddiwr
Blwch Pŵer Cyfrifiadura Ar y Bwrdd Perfformiad Uchel Manifold 3, Blwch Pŵer Cyfrifiadura Ar y Bwrdd Perfformiad, Blwch Pŵer Cyfrifiadura Ar y Bwrdd, Blwch Pŵer Cyfrifiadura, Blwch Pŵer

Cyfeiriadau

Gadael sylw

Ni fydd eich cyfeiriad e-bost yn cael ei gyhoeddi. Mae meysydd gofynnol wedi'u marcio *