ይዘቶች መደበቅ
1 DJI Manifold 3 High Performance Onboard Computing Power Box
2 ይህንን መመሪያ በመጠቀም
3 የምርት ፕሮfile
4 መጫን
5 አጠቃቀም
6 ተገናኝ
7 ሰነዶች / መርጃዎች
7.1 ዋቢዎች

dji-logo

DJI Manifold 3 High Performance Onboard Computing Power Box

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-product

ይህ ሰነድ በDJI የቅጂ መብት የተጠበቀ ሲሆን ሁሉም መብቶች የተጠበቁ ናቸው። በDJI ካልሆነ በቀር፣ ሰነዱን በማባዛት፣ በማስተላለፍ ወይም በመሸጥ ሌሎች ሰነዱን ወይም የትኛውንም የሰነዱን ክፍል ለመጠቀም ወይም ለመፍቀድ ብቁ አይደሉም። የ DJI ምርቶችን ለመስራት ይህንን ሰነድ እና ይዘቱን እንደ መመሪያ ብቻ ይመልከቱ። ሰነዱ ለሌላ ዓላማዎች ጥቅም ላይ መዋል የለበትም.
በተለያዩ ስሪቶች መካከል ልዩነት በሚፈጠርበት ጊዜ የእንግሊዘኛ ቅጂው የበላይነት ይኖረዋል.

ቁልፍ ቃላትን በመፈለግ ላይ
ፈልግ ርዕስ ለማግኘት እንደ “ባትሪ” እና “ጫን” ያሉ ቁልፍ ቃላት። ይህንን ሰነድ ለማንበብ አዶቤ አክሮባት ሪደርን እየተጠቀሙ ከሆነ ፍለጋ ለመጀመር Ctrl+F on Windows ወይም Command+F በ Mac ላይ ይጫኑ።

ወደ አንድ ርዕስ በማሰስ ላይ
View በይዘት ሠንጠረዥ ውስጥ የተሟላ የርእሶች ዝርዝር። ወደዚያ ክፍል ለመሄድ ርዕስ ላይ ጠቅ ያድርጉ።

ይህንን ሰነድ ማተም
ይህ ሰነድ ባለከፍተኛ ጥራት ማተምን ይደግፋል።

ይህንን መመሪያ በመጠቀም

አፈ ታሪክ

  • አስፈላጊ
  • ጠቃሚ ምክሮች እና ምክሮች
  • ማጣቀሻ

የቪዲዮ ትምህርቶች

ከታች ወዳለው አድራሻ ይሂዱ ወይም የQR ኮድን ይቃኙ የአጋዥ ቪዲዮዎችን ለማየት ይህም ምርቱን ደህንነቱ በተጠበቀ ሁኔታ እንዴት እንደሚጠቀሙበት ያሳያሉ፡

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-1https://enterprise.dji.com/manifold-3/video

DJI አጋዥ 2 አውርድ

Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Only supports the Windows version.

የምርት ፕሮfile

አልቋልview

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-2

ዩኤስቢ-ሲ ወደብ
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.

  • Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
  • When the port is not in use, make sure to cover it and tighten the thumb screw.

ዳግም አስጀምር አዝራር
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.

የ LED አመልካች

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-3

ኢ-ወደብ

For connecting compatible aircraft only.

ዝርዝሮች

የሚከተለውን ይጎብኙ webጣቢያ ለ ዝርዝር መግለጫዎች.
https://enterprise.dji.com/manifold-3/specs

መጫን

Installing on DJI Matrice 400

Tool List (sold separately)

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-4

በመጫን ላይ
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-5 dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-6

አጠቃቀም

Firmware ዝማኔ

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Make sure the computer is connected to the internet and the DJI device is powered on.
  3. DJI Assistant 2ን ያስጀምሩ እና በ DJI መለያ ይግቡ።
  4. Select the device and click Firmware Upgrade on the left side.
  5. የጽኑ ትዕዛዝ ሥሪቱን ይምረጡ እና ለማዘመን ጠቅ ያድርጉ። ፋየርዌሩ ይወርዳል እና በራስ-ሰር ይዘምናል።
  6. A prompt appears when the update is successful.
  • Users can also download the firmware package from the DJI official website for an offline update. Launch DJI Assistant 2 and click Offline Update. Select the device and the firmware package, then tap Start Update.
  • The update will take a while. Wait patiently until it finishes.

Manifold Application

Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.

ጎብኝ https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.

ትግበራውን ጫን

  1. Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
  2. Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
  3. Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.
  • To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
  • To upgrade, follow the steps above to install the upgraded installation package.

መተግበሪያውን ያሂዱ
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View በመነሻ ገጽ ላይ.

The interface may vary depending on the payload installed. Please refer to the actual interface.

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-7

  1. After entering the camera view, tap … on the left side to view the installed applications.
  2. Tap the icon of the desired application to launch it. Users can view the operation effects in the camera view.
    • Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
    • Press and hold the application icon, then drag it to the function bar to pin it in the camera view በቀላሉ ለመድረስ.

Export Application Files

Using DJI Pilot 2

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Export. The data files will be saved to the USB drive or hard drive.

DJI አጋዥ 2ን በመጠቀም

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data fileወደ ውጭ ለመላክ.

የምዝግብ ማስታወሻዎችን ወደ ውጪ ላክ

Export Manifold 3 Logs

  1. Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
  2. DJI Assistant 2ን ያስጀምሩ እና በ DJI መለያ ይግቡ።
  3. Select the device and click Log Export on the left side.
  4. Click the checkbox to select designated device logs.

Export Application Logs

  1. Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
  2. Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.

When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files section and select the log fileወደ ውጭ ለመላክ.

እኛ ለእርስዎ እዚህ ነን

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-8

ተገናኝ

የዲጂ ድጋፍ

ያለ ቅድመ ማስታወቂያ ይዘቱ ሊለወጥ ይችላል።

የቅርብ ጊዜውን ስሪት ከ ያውርዱ

dji-Manifold-3-High-Performance-Onboard-Computing-Power-Box-fig-9https://enterprise.dji.com/manifold-3/downloads
ስለዚህ ሰነድ ማንኛውም ጥያቄ ካለዎት ወደ እሱ መልእክት በመላክ ዲጂአይ ያነጋግሩ DocSupport@dji.com.

DJI and MANIFOLD are trademarks of DJI. Copyright © 2025 DJI All Rights Reserved.

ሰነዶች / መርጃዎች

dji Manifold 3 High Performance Onboard Computing Power Box [pdf] የተጠቃሚ መመሪያ
Manifold 3 High Performance Onboard Computing Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box

ዋቢዎች

አስተያየት ይስጡ

የኢሜል አድራሻዎ አይታተምም። አስፈላጊ መስኮች ምልክት ተደርጎባቸዋል *