DJI Manifold 3 High Performance Onboard Computing Power Box
Ity antontan-taratasy ity dia manana zon'ny mpamorona avy amin'ny DJI miaraka amin'ny zo rehetra voatokana. Raha tsy nahazo alalana avy amin'ny DJI ianao, dia tsy mahazo mampiasa na mamela ny hafa hampiasa ilay antontan-taratasy na ampahany amin'ny antontan-taratasy amin'ny alàlan'ny famoahana, famindrana na fivarotana ilay antontan-taratasy. Antsoy ihany ity antontan-taratasy ity sy ny votoatiny ho toromarika hampiasana ny vokatra DJI. Ny antontan-taratasy dia tsy tokony hampiasaina amin'ny tanjona hafa.
Raha misy tsy fitoviana eo amin'ny dikan-teny samihafa dia ny dikan-teny anglisy no hanjaka.
Fikarohana Keywords
Hitady ny teny fanalahidy toy ny "bateria" sy ny "mametraka" mba hahitana lohahevitra iray. Raha mampiasa Adobe Acrobat Reader ianao hamakiana ity antontan-taratasy ity dia tsindrio Ctrl+F amin'ny Windows na Command+F amin'ny Mac hanombohana fikarohana.
Mandehana mankany amin'ny lohahevitra iray
View lisitry ny lohahevitra feno ao amin'ny lisitry ny atiny. Kitiho ny lohahevitra iray raha hivezivezy mankany amin'io fizarana io.
Manonta ity Document ity
Ity antontan-taratasy ity dia manohana fanontana avo lenta.
Mampiasa ity boky torolalana ity
Maribolana
- ZAVA-DEHIBE
- Soso-kevitra sy toro-hevitra
- Reference
Video Tutorials
Mandehana any amin'ny adiresy etsy ambany na mijery ny kaody QR hijerena ireo horonan-tsary fampianarana, izay mampiseho ny fomba fampiasana ny vokatra azo antoka:
https://enterprise.dji.com/manifold-3/video
Ampidino ny DJI Assistant 2
Download and install DJI ASSISTANT™ 2 (Enterprise Series) using the link below: https://www.dji.com/downloads/softwares/assistant-dji-2-for-matrice
* Ny dikan-Windows ihany no manohana.
Product Profile
TAPITRAview
Seranan-tsambo USB-C
It supports connecting USB 3.0 devices (such as docking stations and USB drives), but does not support connecting a computer directly.
- Use USB PD chargers to power the device via this port, such as the DJI 100W USB-C Power Adapter or DJI 65W Portable Charger.
- When the port is not in use, make sure to cover it and tighten the thumb screw.
Reset Button
Press and hold for 10 seconds to restore factory settings, which will erase installed applications and all data.
LED famantarana
E-Port
For connecting compatible aircraft only.
fepetra arahana
Tsidiho ireto manaraka ireto webtranokala ho an'ny fepetra.
https://enterprise.dji.com/manifold-3/specs
Fametrahana
Installing on DJI Matrice 400
Lisitry ny fitaovana (amidy mitokana)
fametrahana
Follow the diagram for installation and connection. The device can only connect to the aircraft’s E1/E2/E3 ports. It is recommended to connect to the E3 port.
Fampiasana
Firmware Update
- Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
- Make sure the computer is connected to the internet and the DJI device is powered on.
- Sokafy ny DJI Assistant 2 ary midira amin'ny kaonty DJI.
- Select the device and click Firmware Upgrade on the left side.
- Safidio ny kinova firmware ary tsindrio ny fanavaozana. Ny firmware dia alaina sy havaozina ho azy.
- A prompt appears when the update is successful.
- Users can also download the firmware package from the DJI official webtranokala ho an'ny fanavaozana an-tserasera. Sokafy ny DJI Assistant 2 ary tsindrio ny Update Offline. Safidio ny fitaovana sy ny fonosana firmware, ary tsindrio ny Start Update.
- The update will take a while. Wait patiently until it finishes.
Manifold Application
Developers can create Manifold 3 application based on DJI PSDK, and users can install and use the application via DJI Pilot 2. Visit https://developer.dji.com/payload-sdk for development information and guidelines.
FITSIDIHANA https://enterprise.dji.com/ecosystem to search for and obtain application software that meets your requirements.
Ampidiro ny Application
- Copy the installation package with the .dpk extension to the remote controller’s built-in storage or an external microSD card. Connect Manifold 3 to the aircraft, and power on the remote controller and aircraft. Ensure the remote controller is connected to the internet.
- Launch DJI Pilot 2, and tap Manifold 3 > Application Management.
- Tap the “+” in the upper right corner, and select the installation package file for installation. Successfully installed applications will be displayed on the Application Management page.
- To uninstall, enter Application Management page, then select the application and tap More > Application Uninstallation.
- To upgrade, follow the steps above to install the upgraded installation package.
Alefaso ny Application
Connect Manifold 3 to the aircraft. Launch DJI Pilot 2 and tap Enter Camera View eo amin'ny pejy fandraisana.
Ny interface dia mety miovaova arakaraka ny enta-mavesatra napetraka. Mba jereo ny tena interface tsara.
- After entering the camera view, tap … on the left side to view the installed applications.
- Tap the icon of the desired application to launch it. Users can view ny vokatry ny fandidiana ao amin'ny fakantsary view.
- Using multiple applications simultaneously is not supported. To switch to another application, tap the icon of the running application to close it first.
- Press and hold the application icon, then drag it to the function bar to pin it in the camera view mba hidirana mora.
Fampiharana fanondranana Files
Using DJI Pilot 2
- Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C port.
- Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap File Export. Ny data files will be saved to the USB drive or hard drive.
Mampiasa DJI Assistant 2
- Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
- Launch DJI Assistant 2, click Log Export > Manifold 3 > Open Directory, and select the data files manondrana.
Export Logs
Export Manifold 3 Logs
- Connect Manifold 3 to the aircraft, then connect the aircraft to a computer.
- Sokafy ny DJI Assistant 2 ary midira amin'ny kaonty DJI.
- Select the device and click Log Export on the left side.
- Click the checkbox to select designated device logs.
Export Application Logs
- Connect Manifold 3 to the aircraft, then connect the USB drive or hard drive to Manifold 3’s USB-C Port.
- Launch DJI Pilot 2 and enter the Application Management page, then select the desired application and tap More > Log Export. The logs will be saved to the USB drive or hard drive.
When using DJI Assistant 2 to export logs, follow the steps in the Export Application Files ary safidio ny log files manondrana.
ETO HO ANAO izahay
Contact
FANOHANANA DJI
Ny atiny dia mety hiova tsy misy fampandrenesana mialoha.
Misintona ny kinova farany avy amin'ny
https://enterprise.dji.com/manifold-3/downloads
Raha manana fanontaniana momba an'ity antontan-taratasy ity ianao dia mifandraisa amin'ny DJI amin'ny fandefasana hafatra any DocSupport@dji.com.
DJI sy MANIFOLD dia marika famantarana ny DJI. Copyright © 2025 DJI All Rights Reserved.
Documents / Loharano
 |
dji Manifold 3 High Performance Onboard Computing Power Box [pdf] Boky Torolàlana Manifold 3 High Performance Onboard Power Box, Performance Onboard Computing Power Box, Onboard Computing Power Box, Computing Power Box, Power Box |