CORE Series Loop Chaw Nres Nkoj Loop Pedal
Cov neeg siv phau ntawv

LOOP CORE
Cov neeg siv phau ntawv
www.nuxefx.com

CORE Series Loop Chaw Nres Nkoj Loop Pedal

Ua tsaug rau koj xaiv tus niam Loop Core pedal!
Loop Core tso cai rau koj sau thiab tsim cov suab paj nruag theem thiab ua si rov qab ua voj! Txawm hais tias koj xyaum, sau, lossis ua si gigs nyob, koj yuav tau txais kev tshoov siab los ntawm kev ua haujlwm zoo ntawm Loop Core!
Thov siv sijhawm los nyeem phau ntawv no kom zoo kom tau txais txiaj ntsig zoo tshaj plaws ntawm chav tsev. Peb xav kom koj khaws phau ntawv ntawm tes rau yav tom ntej siv.

NTA

• Sau thiab overdub ntau txheej raws li koj xav tau.
• Mus txog 6 Teev cov sijhawm kaw.
• Mono lossis Stereo kaw * (lub tso suab tso suab nkaus xwb ntawm AUX IN jack).
• 99 cov neeg siv nco.
• Ua-nyob rau hauv lem lem nrog 40 qauv.
• Hloov cov playback tempo ntawm koj cov lus kaw tseg yam tsis hloov tus yuam sij.
• Hloov cov lus tsis muaj latency.
• Extensional pedal (yeem) rau kev tswj ntau dua.
• Ntshuam thiab thaub qab kab lus nrog PC.
• Khiav ntawm roj teeb thiab AC adaptor.

Copyright
Copyright 2013 Cherub Technology Co. All rights reserved. NUX thiab LOOP CORE yog cov cim lag luam ntawm Cherub Technology Co. Lwm cov khoom npe ua qauv hauv cov khoom no yog cov cim lag luam ntawm lawv cov tuam txhab uas tsis pom zoo thiab tsis cuam tshuam lossis koom nrog Cherub Technology Co.
Qhov tseeb
Thaum ua txhua qhov kev mob siab tau ua kom ntseeg tau qhov tseeb thiab cov ntsiab lus ntawm phau ntawv no, Cherub Technology Co. ua rau tsis muaj kev sawv cev lossis kev lees paub txog cov ntsiab lus.
CEEB TOOM!-Tseem ceeb cov lus qhia txog kev nyab xeeb ua ntej sib txuas, nyeem cov lus qhia
CEEB TOOM: Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws kub lossis hluav taws xob, tsis txhob tso cov khoom siv no los nag lossis dej noo.
CEEB TOOM: Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws lossis hluav taws xob, tsis txhob tshem cov ntsia hlau. Tsis muaj cov neeg siv khoom siv tau sab hauv. Xa mus rau kev pabcuam rau cov neeg ua haujlwm pabcuam uas tsim nyog.
CEEB TOOM: Cov cuab yeej no tau raug sim thiab pom tias ua tau raws li qhov txwv rau Class B cov cuab yeej siv raws li Tshooj 15 ntawm FCC Cov Cai. Kev ua haujlwm yuav raug raws ob qhov xwm txheej hauv qab no: (1) Cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) lub cuab yeej no yuav tsum lees txais txhua yam cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau tsis ua haujlwm.
Lub cim xob laim nyob rau hauv daim duab peb sab txhais tau tias "kev ceeb toom hluav taws xob!" Nws qhia txog lub xub ntiag ntawm cov ntaub ntawv hais txog kev khiav hauj lwm voltage thiab tej zaum yuav raug hluav taws xob poob siab.
Txoj kauv exclamation nyob hauv daim duab peb sab txhais tau tias "ceev faj!" Thov nyeem cov ntawv nyob ib sab ntawm tag nrho cov paib hais qhia.

1. Tsuas yog siv cov khoom siv hluav taws xob lossis hluav taws xob txuas. Yog tias koj tsis paub meej txog hom hluav taws xob muaj, nrog koj tus neeg muag khoom lossis lub tuam txhab hluav taws xob hauv zos.
2. Tsis txhob tso ze rau qhov chaw cua sov, xws li lub tshuab hluav taws xob, cov ntawv sau hluav taws xob, lossis cov khoom siv hluav taws xob uas tsim hluav taws xob.
3. Tiv thaiv cov khoom los yog kua dej uas nkag los ntawm qhov chaw ntim.
4. Tsis txhob sim muab cov khoom no rau koj tus kheej, vim tias qhib lossis tshem cov npog yuav ua rau koj muaj kev phom sijtage cov ntsiab lus lossis lwm yam kev pheej hmoo. Xa tag nrho cov kev pabcuam rau cov neeg ua haujlwm tsim nyog.
5. Xa mus rau txhua qhov kev pabcuam rau cov neeg ua haujlwm pabcuam uas tsim nyog. Kev pabcuam yuav tsum tau ua thaum lub tshuab tau raug puas tsuaj nyob rau hauv txhua txoj kev, xws li thaum lub hwj huam qaum lossis lub ntsaws puas ntsoog, cov kua tau nchuav lossis cov khoom tau poob rau hauv lub tshuab, lub tshuab tau raug los nag lossis ya raws, tsis ua haujlwm ib txwm los yog tau poob.
6. Lub tshuab hluav taws xob txuas yuav tsum tsis muab tshem tawm thaum ntsuas cov khoom siv yuav tsum tsis siv mus ntev.
7. Tiv thaiv txoj hlua hluav taws xob los ntawm kev taug kev los yog pinched tshwj xeeb ntawm cov ntsaws ruaj ruaj, cov khoom siv yooj yim thiab ntawm qhov chaw uas lawv tawm ntawm lub cuab yeej.
8. Kev mloog ntev ntev ntawm qhov ntim siab tuaj yeem ua rau tsis hnov ​​​​lus tsis zoo thiab / lossis puas. Nco ntsoov xyaum "kev mloog zoo".

Ua raws li tag nrho cov lus qhia thiab ua raws li tag nrho cov lus ceeb toom UA HAUJ LWM NO!

PRODUCT INTERFACE

 

1. DISPLAY
   Nws qhia txog tus lej cim xeeb thiab lub suab sib dhos, thiab lwm yam ntaub ntawv teeb tsa.
2. LOOP pob qhov rooj
   Txhawm rau kho cov suab nrov playback ntawm cov suab kaw.
3. RHYTHM pob qhov rooj
   Txhawm rau kho qhov ntim theem ntawm lub suab lem sab hauv.
4. SAVE/DELETE khawm
   Txhawm rau txuag cov kab lus tam sim no lossis tshem tawm cov kab lus hauv kev nco tam sim no.
5. STOP MODES khawm
   Txhawm rau xaiv txoj hauv kev uas koj xav nres thaum ua si tom qab koj nias pedal kom nres.(saib. 1.4 kom paub meej.)
6. RHTHM khawm
   Qhov no yog rau qhib / tawm lub suab sib dhos lossis xaiv cov qauv sib dhos.
7. LED Teeb REC:
   Lub teeb liab qhia tias koj tab tom kaw. DUB: Lub teeb txiv kab ntxwv qhia tias koj ua dhau lawm. PLAY: Lub teeb ntsuab qhia tias nws yog thaum lub sijhawm ua si ntawm theem tam sim no.
   Thaum overdubbing, DUB thiab PLAY yuav teeb.
8. Khawm khawm
   Nias qhov no ob peb zaug nyob rau hauv lub sij hawm teem lub tempo ntawm atherosclerosis. Qhov no tuaj yeem hloov qhov kev ua si nrawm ntawm lub voj uas tau txais kev cawmdim.
9. Up thiab Down khawm
   Rau xaiv cov lej cim xeeb, cov qauv sib dhos, thiab lwm yam kev xaiv.
10. Ko Taw Hloov
    Txhawm rau kaw, overdub, playback, thiab koj kuj nias lub pedal no kom nres, undo / redo thiab meej kaw. (Thov saib cov lus qhia hauv qab no kom paub meej)
11. USB Nkaus
    Txuas lub Loop Core rau koj lub PC nrog lub mini USB cable los import lossis thaub qab cov ntaub ntawv suab. (Saib 4.7)
12. POWER hauv voj
    Core xav tau 9V DC / 300 mA nrog qhov nruab nrab tsis zoo. Siv cov khoom siv hluav taws xob nrog cov lus qhia zoo ib yam. (ie Optional NUX ACD-006A)
13. AUX IN (Stereo In)
    Koj tuaj yeem txuas lub suab paj nruag txuas ntxiv mus rau cov suab paj nruag tso suab tso suab rau Loop Core, thiab kaw cov suab paj nruag tawm suab ua lub suab tso suab. Lossis, koj tuaj yeem siv "Y" cable los nkag rau lub suab tso suab los ntawm koj cov teebmeem guitar lossis lwm yam twj paj nruag rau Loop Core.
14. hauv jack
    Qhov no yog mono input. Txuas koj lub guitar rau lub jack no.
15. CtrI Ib
    Qhov no yog rau kev txuas txuas ntxiv pedals kom tsis txhob ua si, tshem cov kab lus, hloov kev nco, lossis ua TAP tempo. (Saib 3.7)
16. 0ut L/Out R Stereo
    Cov no tso tawm cov teeb liab rau koj lub guitar amp los yog tov khoom. Tawm L yog lub ntsiab mono tso zis. Yog tias koj tsuas muab koj lub guitar ua mono teeb liab, thov siv Out L.

TSEEM CEEB:
Tawm L ua haujlwm raws li lub zog ua kom zoo. Unplug lub cable los ntawm Out L yuav tua lub zog ntawm Loop Core.
Yog tias koj tso lub tso suab tso suab los ntawm AUX Hauv, thiab lub suab tsuas yog tawm ntawm Out L mus rau monaural system, lub suab yuav tso tawm raws li lub teeb liab mono.

INSTALLING cov roj teeb

Roj teeb yog muab nrog lub tsev. Lub neej ntawm roj teeb yuav raug txwv, txawm li cas los xij, txij li lawv lub hom phiaj tseem ceeb yog los ua kom muaj kev sim.
Ntxig cov roj teeb raws li qhia hauv daim duab, ua tib zoo saib xyuas cov roj teeb kom raug.

1. Tshem lub roj teeb qub ntawm lub tsev roj teeb, thiab tshem tawm cov hlua txuas nrog nws.
2. Txuas lub txuas qaum txuas rau lub roj teeb tshiab, thiab muab cov roj teeb rau sab hauv lub roj teeb.
3. Thaum lub roj teeb khiav qis, lub suab ntawm chav tsev tau distort. Yog tias qhov no tshwm sim, hloov nrog lub roj teeb tshiab.
4. Roj teeb lub neej yuav txawv nyob ntawm seb hom roj teeb.
5. Lub hwj chim tuaj thaum koj ntxig lub connector ntsaws rau hauv OUT L jack.
6. Kev siv ntawm AC adapter yog pom zoo raws li chav tsev siv hluav taws xob yog qhov siab.

Kev sib txuas

POWER ON/OFF

Thaum ua haujlwm ntawm lub roj teeb lub zog, ntxig lub ntsaws rau hauv OUT L jack yuav cia li hloov lub tsev.
Txhawm rau tiv thaiv kev ua haujlwm tsis zoo thiab / lossis kev puas tsuaj rau cov neeg hais lus lossis lwm yam khoom siv, nco ntsoov tig lub ntim, thiab tua lub zog ntawm txhua yam khoom siv ua ntej kev sib txuas.
Thaum cov kev sib txuas tau ua tiav, qhib lub hwj chim rau koj ntau yam khoom siv hauv qhov kev txiav txim tau teev tseg. Los ntawm kev qhib lub cuab yeej hauv qhov kev txiav txim tsis raug, koj yuav ua rau muaj kev ua haujlwm tsis zoo thiab / lossis kev puas tsuaj rau cov neeg hais lus thiab lwm yam khoom siv.
Thaum fais fab tuag: Qhib lub zog rau koj lub guitar amp kawg. Thaum fais fab tuag: tua lub hwj chim rau koj lub guitar amp ua ntej.
CEEB TOOM: Loop Core yuav siv sij hawm li ob peb vib nas this los kuaj tus kheej thiab cov zaub yuav qhia "SC" tom qab nws tau qhib. Nws yuav rov qab mus rau qhov qub qub tom qab kuaj tus kheej.

KEV PAB CUAM

1.Tau sau thiab tsim ib lub vojvoog lus
1.1 TSEEM CEEB MODE (Default)
1.1.1 Xaiv qhov chaw nco khoob los ntawm nias lub Up thiab Down xub. Cov zaub qhia txog tus lej nco tam sim no. Ib lub cim ntawm lub kaum sab xis ntawm cov zaub txhais tau hais tias tus lej cim xeeb tam sim no twb muaj cov ntaub ntawv khaws tseg. Yog tias tsis muaj dot, nws txhais tau hais tias tus lej cim xeeb tam sim no tsis muaj cov ntaub ntawv, thiab koj tuaj yeem pib tsim lub voj tshiab thiab txuag nws hauv qhov chaw nco.
1.1.2 RECORD: Nias lub pedal kom pib sau lub voj.
1.1.3 OVERDUB: Tom qab lub voj kaw lawm, koj tuaj yeem sau cov overdub ntawm nws. Txhua zaus koj nias lub pedal, cov kab ke yog: Rec – Play – Overdub.
CEEB TOOM: Koj tuaj yeem hloov qhov ntu no mus rau: Sau -Overdub - Ua si los ntawm kev ua raws li qhov no:
Thaum tuav lub pedal, tig lub zog los ntawm kev ntxig DC jack thiab ntsaws ib lub cable hauv OUT L jack. Cov zaub yuav qhia ""los yog" ", koj tuaj yeem xaiv ib qho los ntawm nias lub xub khawm, thiab nias lub pedal ib zaug ntxiv kom paub meej.
“” rau Cov Ntaub Ntawv - Overdub - Ua Si.
“” rau Cov Ntaub Ntawv - Ua Si - Overdub.
CEEB TOOM: Txhawm rau overdub ntawm kab lus tam sim no. Loop Core xav kom tag nrho cov sijhawm sau cia yuav tsum ntev dua lub sijhawm ntawm kab lus tam sim no. Yog tias lub teeb DUB LED tseem ntsais tom qab koj overdub, nws txhais tau tias koj tsis tuaj yeem overdub raws li txoj cai.
Yog tias qhov screen qhia "”, nws txhais tau hais tias lub cim xeeb puv thiab koj tsis muaj peev xwm sau tau.
1.1.4 STOP: Thaum playback lossis overdubbing, ob-nias lub pedal (nias lub pedal ob zaug hauv 1 sec) kom nres.
1.2 AUTO CODING MODE
Koj tuaj yeem teeb lub Loop Core mus rau Auto Recording hom los ntawm cov kauj ruam hauv qab no:
1.2.1 Nyob rau hauv ib qho kev nco qhov khoob, nias thiab tuav STOP MODE khawm rau 2 sec, "” yuav blinking ntawm cov zaub, nias STOP MODE khawm dua nyob rau hauv 2 sec hloov nws mus rau "” txhawm rau pab kom Auto Recording hom.
1.2.2 Nyob rau hauv hom no, thawj zaug koj nias lub pedal yuav nkag mus rau cov ntaubntawv povthawj siv standby xwm txheej, thiab REC LED yuav blinking. Nws cia li pib sau ntawv sai li sai tau thaum nws pom lub suab tawm tswv yim los ntawm AUX In lossis Input jack.
1.2.3 Overdubbing thiab playback yog tib yam li ib txwm kaw hom.
CEEB TOOM: Hloov mus rau Auto Recording hom tsuas yog ua haujlwm ib ntus rau qhov chaw nco tam sim no. Hloov mus rau tus lej cim xeeb tom ntej yuav rov qab mus rau Hom Kev Teev Tseg, uas yog lub neej ntawd hom rau Loop Core.
1.3 UNDO/REDO/CLEAR UNDO
Thaum overdubbing lossis playback, koj tuaj yeem tuav lub pedal rau 2 sec kom undo (tso tseg) qhov overdubbing tsis ntev los no.
REDO Thaum lub sijhawm ua si, nias thiab tuav lub pedal rau 2 vib nas this tuaj yeem rov qab tau qhov overdubbing uas koj nyuam qhuav tso tseg.
* Redo tsuas yog rau kev rov ua kom rov ua dua. Yuav muaj ib qho me ntsis tso tawm nyob rau hauv nruab nrab ntawm ob tus lej los qhia tias koj muaj cov ntaub ntawv tuaj yeem rov qab los.
TSHIAB Koj tuaj yeem tshem tag nrho cov ntaub ntawv kaw tseg hauv lub cim xeeb no los ntawm kev tuav lub pedal rau 2 sec thaum nres. (Twb tau khaws tseg cov ntaub ntawv yuav tsis raug tshem tawm txoj kev no, uas txawv ntawm DELETE (saib 1.8)
1.4 STOP MODES
LOOP CORE muaj peb hom nres uas koj tuaj yeem xaiv ua kom tiav qhov kev ua si.
1.4.1 Ua ntej pib ua si lub voj lossis thaum lub sijhawm ua si, koj tuaj yeem nias STOP MODES cov nyees khawm xaiv txoj kev koj xav kom lub voj xaus tom qab koj ob-nias lub pedal.
” ”: tam sim ntawd nres.
” ": nres ntawm qhov kawg ntawm lub voj voog no.
“": ploj mus thiab nres hauv 10sec.
1.4.2 Yog tias koj xaiv " “Lossis“", tom qab koj ob-nias lub pedal thaum lub sijhawm ua si, PLAY LED yuav pib ntsais mus txog thaum nws nres. Yog hais tias koj tseem xav kom lub voj xaus tam sim ntawd thaum lub sij hawm thaum lub sij hawm PLAY LED yog blinking, cia li ceev ceev nias lub pedal ib zaug dua.
1.5 SWITCHING nco tus lej/LOOPS
Koj tuaj yeem nias nce thiab nqis khawm kom hloov cov lej cim xeeb / voj voog, lossis siv cov pedal txuas ntxiv (saib 3 ).
Thaum lub sij hawm playback, yog tias koj hloov mus rau lwm lub voj, tus naj npawb ntawm cov kab lus xaiv yuav pib ntsais, thiab thaum lub voj tam sim no mus txog qhov kawg, lub voj uas xaiv yuav pib ua si. Kev hloov pauv tsis muaj GAP, yog li nws yog qhov zoo tshaj plaws rau kev tsim kom muaj kev txhawb nqa tag nrho uas muaj nqe thiab hu nkauj !!
1.6 Txuag ib lub voj rau nco
Thaum koj tau tsim lub voj suab paj nruag, koj tuaj yeem khaws cia rau hauv nco. Koj tuaj yeem txuag tau txog 99 nco. Txhua lub cim xeeb tuaj yeem ntev li ntev tau raws li koj xav tau kom txog thaum nws ncav cuag lub cim xeeb txwv. Lub cim xeeb txwv ntawm Loop Core yog 4GB. Lub sijhawm sau ntawv siab tshaj plaws yog li 6 teev.
1.6.1 Xovxwm luv Txuag khawm thiab koj yuav pom tus lej nco thiab ” ” yuav blinking ntawm cov zaub nyob rau hauv lem.
1.6.2 Nias Up los yog nqes xaiv qhov chaw nco khoob (lub kaum sab xis ntawm cov zaub tsis muaj qhov taw qhia), thiab nias SAVE dua kom paub meej tias qhov chaw cia. Lossis, koj tuaj yeem nias lub pob uas tsis yog Txuag thiab UP/KEV tso tseg tseg.
1.6.3 Tag nrho cov ntaub ntawv nrog rau cov ntaub ntawv kaw tseg, nres hom, tempo thiab cov qauv sib dhos xaiv yuav raug cawm. Tab sis hom kaw yuav tsis raug cawm. Auto Recording hom tsuas tuaj yeem teeb tsa ib ntus (saib 1.2).
CEEB TOOM: Koj tsis tuaj yeem khaws cia rau qhov chaw nco uas twb muaj cov ntaub ntawv. Thaum lub sij hawm kauj ruam 1.6.2, yog tias koj nias UP lossis DOWN khawm thiab tus lej cim xeeb tom ntej twb muaj cov ntaub ntawv, nws yuav coj koj mus rau qhov chaw nco qhov khoob.
1.7 COPY A LOOP lus
Tej zaum koj yuav xav luam ib lub voj uas khaws cia rau lwm qhov chaw nco los ntawm cov kauj ruam hauv qab no:
1.7.1 Xaiv lub cim xeeb voj uas koj xav luam.
1.7.2 Xovxwm luv SAVE/DELETE khawm thiab koj yuav pom tus lej cim xeeb ntawm cov zaub pib blinking.
1.7.3 Nias Up lossis Down xaiv qhov chaw nco qhov chaw khoob (lub kaum sab xis ntawm cov zaub tsis muaj qhov taw qhia), thiab nias SAVE/DELETE dua kom paub meej qhov chaw cia.
CEEB TOOM: Yog hais tias qhov seem ntawm lub cim xeeb tsis txaus rau kev luam cov voj uas xaiv, cov zaub yuav qhia "”.
1.8 DELETE A MEMORY
1.8.1 Nias thiab tuav lub SAVE/DELETE khawm ob thib ob, koj yuav pom "” blinking ntawm cov zaub.
1.8.2 Nias SAVE/DELETE ib zaug ntxiv kom paub meej tias tshem tawm. Lossis, koj tuaj yeem nias lub pob uas tsis yog SAVE/DELETE kom tso tseg.
1.8.3 Tag nrho cov ntaub ntawv nrog rau cov ntaub ntawv kaw tseg, nres hom, tempo thiab cov qauv sib dhos xaiv yuav raug muab tshem tawm.
2.RHYTHM TRACKS
LOOP CORE muaj cov kab sib dhos ua ke uas muaj 40 tus qauv, xws li metronome nyem rau nruas lem uas npog ntau hom suab paj nruag. Koj tuaj yeem siv lub suab sib dhos los coj koj cov ntaubntawv povthawj siv, lossis txawm tias tom qab koj ua tiav cov ntaubntawv povthawj siv, koj tuaj yeem qhib lub suab lem, thiab nws yuav ntse tam sim ntawd pom koj ntaus thiab ua raws! Coj mus rhaub tempo khawm blinks los qhia qhov ntaus.
2.1 Xovxwm RHYTHM or KOV TEMPO khawm tig rau lub suab nrov. Lub suab nrov yog metronome nyem. Cov RHYTHM khawm blinks los qhia lub tempo. Yog tias koj pib lub suab nrov tom qab lub voj tau kaw lawm, Loop Core yuav cia li ntes lub tempo ntawm lub voj.
2.2 KOV TEMPO khawm teeb kom qhia tias koj tuaj yeem siv qhov no los teeb tsa tempo. Yog tias lub pob no tsis teeb, nws txhais tau hais tias kais tempo tsis tuaj yeem ua tau hauv cov xwm txheej zoo li no, piv txwv li thaum kaw lossis overdubbing.
2.3 Nias thiab tuav RHYTHM khawm rau 2 sec, thiab koj yuav pom tus qauv naj npawb blinking ntawm cov zaub.
2.4 Siv UP thiab Down khawm los xaiv koj tus qauv nyiam.
2.5 Siv KOV TEMPO khawm kom teem caij koj xav tau.
2.6 Lub sijhawm lub sijhawm kos npe ntawm Loop Core yog 4/4 tuav. Koj tuaj yeem hloov nws mus rau 3/4 ntaus los ntawm:
2.6.1 Tsuas yog nyob rau hauv qhov chaw nco khoob, qhib lub suab nrov, nias thiab tuav lub khawm TAP TEMPO kom txog thaum koj pom ""los yog""blinking ntawm cov zaub.
2.6.2 Nias Up lossis Down khawm hloov ntawm " "los yog"”
2.6.3 Nyem kais TEMPO dua kom paub meej tias qhov chaw.
CEEB TOOM: Hloov lub sijhawm kos npe rau 3/4 tsuas yog siv tau rau lub cim xeeb tam sim no.
Koj tsuas tuaj yeem hloov lub sijhawm kos npe ua ntej koj pib sau dab tsi. Nws tsis tuaj yeem hloov lub sijhawm kos npe yog tias twb tau kaw lawm.

Lub suab
1	Metronome	11	Hip-Hop 2
2	Nyob zoo-mom	12	Pop
3	Pob zeb	13	Pop 2
4	Rock 2	14	Fast Rock
5	Shuffle	15	Hlau
6	Blues Rock	16	Latin
7	Swing	17	Latin 2
8	Lub teb chaws	18	Old TimesRock
9	Lub teb chaws 2	19	Reggae
10	Hip-Hop	20	Ua las voos

3.SIV EXTENSIONAL CONTROL PEDALS
Koj tuaj yeem ntsaws rau hauv qhov txuas ntxiv tswj pedal rau Ctrl Hauv jack, piv txwv li Cherub WTB-004 Pedal (yeem) kom muaj kev tswj tsis pub siv tes ntau dua thaum ua haujlwm nyob:
3.1 Plug rau hauv WTB-004 rau Ctrl Hauv jack ntawm Loop Core nrog WTB-004 TSIS nias rau tsawg kawg 1 thib ob, kom Loop Core tuaj yeem paub txog lub pedal.
3.2 Nres: luv nias lub WTB-004 ib zaug kom nres thaum kaw, overdubbing thiab playback. Ib yam li ob-nias lub pedal ntawm Loop Core.
3.3 TAP TEMPO: nias WTB-004 ob peb zaug hauv lub sijhawm los teeb tsa lub sijhawm thaum nres.
3.4 Clear Loop: nias thiab tuav WTB-004 yuav tshem tag nrho cov ntaub ntawv kaw tseg uas tsis tau khaws cia.
3.5 Koj tuaj yeem txuas ob lub WTB-004 pedals rau Loop Core yog tias koj siv "Y" zoo li no:
Tom qab ntawd ib qho WTB-004 yuav ua haujlwm zoo li saum toj no, lwm WTB-004 tuaj yeem siv los hloov cov lej cim xeeb:
3.5.1 Luv nias qhov thib ob WTB-004, nws hloov mus rau tus lej nco tom ntej, tib yam li nias lub pob Up.
3.5.2 Nias qhov thib ob WTB-004 ob zaug hauv ib feeb yuav hloov mus rau tus lej cim xeeb yav dhau los, tib yam li koj nias DOWN khawm.
CEEB TOOM: Tsis txhob hloov lub swb-hloov ntawm WTB-004 tom qab koj txuas rau lub voj Core.
4.USB txuas
Txuas lub USB cable (xws li USB cable rau cov koob yees duab digital) ntawm Loop Core thiab koj lub PC, thiab tig lub zog ntawm Loop Core los ntawm kev txuas lub hwj chim adapter thiab ntsaws ib lub cable rau hauv Out L. Cov zaub ntawm Loop Core yuav qhia ” ” thaum nws txuas tau tiav. Tam sim no koj tuaj yeem import WAV files rau Loop Core, lossis thaub qab cov kab lus kaw los ntawm Loop Core rau koj lub PC:
4.1 Mus import WAV file rau Loop Core
4.1.1 Nyem thiab qhib qhov Tshem Tawm Disk ntawm Loop Core, thiab qhib qhov “Cherub” nplaub tshev.
4.1.2 Qhib WAV nplaub tshev, thiab yuav muaj 99 folders rau 99 nco tus lej: "W001", "W002" ..."W099". Xaiv ib daim nplaub tshev uas koj xav import WAV file rau. Rau example: folder “W031”.
4.1.3 Copy the WAV file los ntawm koj lub computer mus rau lub nplaub tshev "W031", thiab rename no WAV file rau "w031.wav".
4.1.4 This WAV file yog imported ntse thiab tuaj yeem ua si raws li lub voj hauv lub cim xeeb 31 hauv Loop Core.
CEEB TOOM: Loop Core txais WAV file uas yog 16-ntsis, tso suab 44.1kHz.
4.2 Txhawm rau thaub qab thiab rov qab cov lus los ntawm Loop Core rau koj lub PC
4.2.1 Luam theej duab "Cherub" rau koj lub PC kom thaub qab.
4.2.2 Luam theej "Cherub" nplaub tshev los ntawm koj lub PC los hloov Cherub nplaub tshev hauv Loop Core tsav kom rov zoo.
TSEEM CEEB: Cov SAVE/DELETE khawm blinks thaum cov ntaub ntawv tab tom hloov. Tsis txhob txiav lub hwj chim los ntawm kev txiav lub hwj chim cable los yog tshem tawm lub cable los ntawm Out 1 jack thaum twg lub Loop Core ua cov ntaub ntawv.
5.FORMATTING LOOP CORE
Nyob rau hauv rooj plaub koj xav rov pib dua Loop Core rov qab mus rau lub Hoobkas, koj tuaj yeem tsim lub Loop Core los ntawm kev ua raws li cov kauj ruam hauv qab no:
5.1 Hwj chim ntawm Loop Core thaum nias lub pedal kom txog thaum cov zaub qhia ""los yog"".
5.2 Nias thiab tuav Up lossis Down khawm rau 2 sec kom txog thaum cov zaub qhia "".
5.3 Nias lub pedal ib zaug ntxiv kom paub meej tias formatting. Los yog, nias lwm cov nyees khawm uas tsis yog lub pedal kom tso tseg formatting.
CEEB TOOM: Formatting Loop Core yuav so tag nrho cov ntaub ntawv kaw tseg los ntawm Loop Core thiab teeb txhua yam rau lub Hoobkas. Nco ntsoov thaub qab tag nrho koj cov ntaub ntawv ua ntej koj format Loop Core! Thaum lub sij hawm formatting, lub voj core yuav khiav tus kheej-test thiab cov zaub yuav qhia ""kom txog thaum formatting tiav.

SPECIFICATIONS

• SampLing zaus: 44.1kHz
• A/D converter: 16 ntsis
• Teeb liab ua: 16 ntsis
• Zaus teb: 0Hz-20kHz
  INPUT impedance: 1 Mohm
  AUX hauv impedance: 33 kohm
  Tawm impedance: 10 kohm
• Zaub: LED
• Lub hwj chim: 9V DC Cov Lus Qhia Tsis Zoo (9V Roj Teeb, ACD-006A Adapter)
• Tam sim no qhov hluav taws xob: 78mA
• Medidas: 122 (L) x 64 (W) x 48 (H) mm
• Luj: 265g

COV KEV CEEV FAJ

• Ib puag ncig:
  1.Tsis txhob siv lub pedal nyob rau hauv kub, high humidity, los yog subzero ib puag ncig.
  2.Tsis txhob siv lub pedal nyob rau hauv lub tshav ntuj ncaj qha.
• Thov tsis txhob disassemble lub pedal ntawm koj tus kheej.
• Thov khaws phau ntawv no rau yav tom ntej siv.

Cov khoom siv

• Tus tswv phau ntawv
• 9V roj teeb
• Warranty card

FCC REGULATION WARNING (rau Asmeskas)
Cov cuab yeej no tau raug sim thiab pom tias ua raws li cov kev txwv rau Chav Kawm 8 cov cuab yeej digital, ua raws li Tshooj 15 ntawm FCC Cov Cai. Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no tsim, siv, thiab tuaj yeem tawg lub zog ntawm xov tooj cua thiab, yog tias tsis tau teeb tsa thiab siv raws li cov lus qhia. tej zaum yuav ua rau muaj teeb meem cuam tshuam rau kev sib txuas lus hauv xov tooj cua. Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj kev cuam tshuam tsis zoo rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig cov cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau qhov kev ntsuas hauv qab no:

• Reorient los yog tshem tawm cov kav hlau txais xov.
• Ua kom muaj kev sib cais ntawm cov khoom siv thiab lub receiver.
• Txuas cov cuab yeej siv rau hauv qhov hluav taws xob ntawm lub voj voog sib txawv ntawm qhov uas lub receiver txuas nrog.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

CE cim rau European Harmonized Cov Qauv
CE Mark uas txuas nrog rau peb lub tuam txhab cov khoom ntawm Roj teeb tseem ceeb cov khoom lag luam yog ua raws li cov qauv kev sib haum xeeb EN 61000-6- 3: 20071-A1: 2011 & EN 61000-6-1: 2007 Raws li Pawg Thawj Coj Cov Lus Qhia 2004/108/ EC ntawm Electromagnetic Compatibility.

©2013 Cherub Technology-Txhua txoj cai.
Tsis muaj ib feem ntawm qhov kev tshaj tawm no yuav raug muab luam tawm hauv ib qho twg
yam tsis muaj ntawv tso cai ua ntej ntawm Cherub Technology.
www.nuxefx.com
Ua nyob rau hauv Suav teb

Cov ntaub ntawv / Cov ntaub ntawv

NUX CORE Series Loop Chaw Nres Nkoj Loop Pedal [ua pdf] Tus neeg siv phau ntawv CORE Series, CORE Series Loop Station Loop Pedal, Loop Station Loop Pedal, Loop Pedal

Cov ntaub ntawv

• Cov neeg siv phau ntawv