I-D L16 Okokufaka 8 Okukhiphayo Stage Box
Umhlahlandlela Womsebenzisi

DL16
16 Okokufaka, 8 Okuphumayo Stage Ibhokisi elinama-16 Midas
Imakrofoni Ngaphambiampama-lifiers, i-ULTRANET ne-ADAT Interfaces

Ukuphepha Okubalulekile

Iziyalezo

ISEXWAYISO
INGOZI YOKUSHAQEKA KAgesi!
UNGAVULI!
Amatheminali amakwe ngalolu phawu athwala ugesi wamandla anele ukwenza ingozi yokushaqeka kagesi.
Sebenzisa kuphela izintambo zesipikha esichwepheshile zekhwalithi ephezulu ezine-¼” TS noma amapulagi a-twist-locking afakwe ngaphambili. Konke okunye ukufakwa noma ukulungiswa kufanele kwenziwe kuphela izisebenzi eziqeqeshiwe.
Lolu phawu, nomaphi lapho luvela khona, lukwazisa ngokuba khona kwevolyumu eyingozi engafakwangatage ngaphakathi kwendawo ebiyelwe - voltage lokho kungase kube ngokwanele ukwenza i-arisk of shock.
Lolu phawu, nomaphi lapho luvela khona, lukwazisa ngemiyalo ebalulekile yokusebenza nokugcinwa ezincwadini ezihambisana nalesi sihloko. Sicela ufunde imanuwali.

Isexwayiso
Ukuze unciphise ingozi yokushaqeka kukagesi, ungasusi ikhava ephezulu (noma ingxenye engemuva).
Azikho izingxenye ezisebenziseka kalula ngaphakathi. Bheka ukuhanjiswa kwabasebenzi abaqeqeshiwe.
Isexwayiso
Ukunciphisa ingozi yomlilo noma ukushaqeka kukagesi, ungabeki lesi sisetshenziswa emvuleni nasemanzini. Izinto ezisetshenziswayo akufanele zivezwe oketshezini oluconsayo noma olufafazwayo futhi azikho izinto ezigcwele uketshezi, njengamavazi, azobekwa emshinini.
Isexwayiso
Le miyalo yesevisi isetshenziswa izisebenzi zesevisi eziqeqeshiwe kuphela.
Ukunciphisa ubungozi bokushaywa ugesi ungenzi noma iyiphi isevisi ngaphandle kwaleyo equkethwe emiyalweni yokusebenza. Ukulungisa kufanele kwenziwe ngabasebenzi abasebenza ngokufanele.

1. Funda le miyalo.
2. Gcina le miyalo.
3. Lalela zonke izixwayiso.
4. Landela yonke imiyalelo.
5. Ungasebenzisi lesi sisetshenziswa eduze namanzi.
6. Hlanza kuphela ngendwangu eyomile.
7. Ungavimbi noma yiziphi izimbobo zokungenisa umoya. Faka ngokuhambisana nemiyalelo yomkhiqizi.
8. Ungafaki eduze kwanoma yimiphi imithombo yokushisa njengama-radiator, amarejista okushisa, izitofu, noma ezinye izinto ezisetshenziswayo (okuhlanganisa ampama-lifiers) akhiqiza ukushisa.
9. Ungayehluli injongo yokuphepha yepulaki eyenziwe nge-polarized noma ephansi. Ipulaki eyenziwe nge-polarized inama-blade amabili eyodwa ububanzi kunomunye. Ipulaki yohlobo oluphansi inama-blade amabili kanye ne-flong yesithathu yaphansi. I-blade ebanzi noma i-prong yesithathu inikezwe ukuphepha kwakho. Uma ipulaki enikeziwe ingangeni endaweni yakho yokukhipha, thintana nomuntu osebenza ngogesi ukuze athathelwe indawo leyo ephelelwe yisikhathi.
10. Vikela intambo yamandla ekuhanjweni ngayo noma ekuncinzweni ikakhulukazi kumapulaki, ezitsheni ezisetshenziswayo, kanye nalapho iphuma khona ku-apparatus.
11. Sebenzisa kuphela okunamathiselwe/izinsiza ezicaciswe umenzi.
12.  Sebenzisa kuphela inqola, isitendi, i-tripod, ubakaki, noma ithebula elicaciswe umkhiqizi, noma elithengiswa nge-apparatus. Uma kusetshenziswa inqola, qaphela uma uhambisa inhlanganisela yekalishi/impahla ukuze ugweme ukulimala okusuka ku-tip-over.
13. Khipha lesi sisetshenziswa phakathi neziphepho zombani noma lapho singasetshenziswa isikhathi eside.
14. Thumela zonke izinsiza kubasebenzi benkonzo abaqeqeshiwe. Ukusevisa kuyadingeka lapho umshini wokusebenza ulimele nganoma iyiphi indlela, njengentambo yokuphakelwa kukagesi noma ipulaki ilimele, uketshezi luchithekile noma izinto ziwele ku-apparatus, izinto ezisetshenziswayo zichayeke emvuleni noma kumswakama, zingasebenzi ngendlela evamile. , noma ulahliwe.
15. I-apparatus izoxhunywa ku-outlet yesokhethi ye-MAINS enoxhumo lomhlaba oluvikelayo.
16. Lapho ipulaki ye-MAINS noma i-coupler kagesi isetshenziswa njengedivaysi yokunqamula, idivayisi yokunqamula izohlala isebenza kalula.
17. Ukulahlwa okulungile kwalo mkhiqizo: Lolu phawu lubonisa ukuthi lo mkhiqizo akufanele ulahlwe nemfucuza yasendlini, ngokuvumelana ne-WEEE Directive (2012/19/EU) kanye nomthetho kazwelonke wakho. Lo mkhiqizo kufanele uyiswe esikhungweni sokuqoqa esinelayisensi yokugaywa kabusha kwezinto ezisetshenziswayo zikagesi neze-elekthronikhi (EEE). Ukungaphathwa kahle kwalolu hlobo lukadoti kungase kube nomthelela omubi emvelweni nempilo yabantu ngenxa yezinto ezingaba yingozi ezivame ukuhlotshaniswa ne-EEE. Ngesikhathi esifanayo, ukubambisana kwakho ekulahleni kahle lo mkhiqizo kuzoba nomthelela ekusetshenzisweni kahle kwemithombo yemvelo. Ukuze uthole ulwazi olwengeziwe mayelana nokuthi ungathatha kuphi okokusebenza kwakho ukuze kugaywe kabusha, sicela uthinte ihhovisi ledolobha langakini noma isevisi yokuqoqwa kukadoti ekhaya.
18. Ungafaki endaweni evalekile, njengebhokisi lezincwadi noma iyunithi efanayo.
19.  Ungabeki imithombo yamalangabi enqunu, njengamakhandlela akhanyisiwe, ku-apparatus.
20. Sicela ugcine izici zemvelo zokuchithwa kwebhethri engqondweni. Amabhethri kufanele alahlwe endaweni okuqoqwa kuyo amabhethri.
21. Lesi sisetshenziswa singasetshenziswa ezindaweni ezishisayo nezilingene ezifika ku-45°C.

ISIKHUMBUZO SOMTHETHO

Isizwe Somculo asamukeli sikweletu nganoma yikuphi ukulahlekelwa okungase kutholwe yinoma yimuphi umuntu othembele ngokuphelele noma ngokwengxenye kunoma iyiphi incazelo, isithombe, noma isitatimende esiqukethwe lapha. Ukucaciswa kobuchwepheshe, ukubonakala nolunye ulwazi kungashintsha ngaphandle kwesaziso. Zonke izimpawu zokuhweba ziyimpahla yabanikazi bazo. I-Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound, TC Electronic, TC Helicon, Behringer, Bugera, Aston Microphones kanye neCoolaudio izimpawu zokuthengisa noma izimpawu zokuthengisa ezibhalisiwe ze-Music Tribe Global Brands Ltd. © Music Tribe Global Brands Ltd. 2021 Wonke amalungelo agodliwe.

ISIQINISEKISO SOMKHAWULO

Ukuze uthole imigomo nemibandela yesiqiniseko esisebenzayo kanye nolwazi olwengeziwe mayelana neSiqiniseko Esinomkhawulo se-Music Tribe, sicela ubheke imininingwane ephelele ku-inthanethi ku- musictribe.com/warranty.

DL16 Ukuhlanganisa

 Ukuhlangana

Ukuxhumeka kwephaneli yangemuva kwe-DL16

Ikhebula lakho konke ukuxhumana kwe-AES50 phakathi kwe-M32 ne-DL16 stagamabhokisi:
- I-CAT-5e evikelekile, i-Ethercon inqanyuliwe
- Ubude bekhebula eliphakeme kakhulu ngamamitha ayi-100 (amafidi angama-330)

DL16 ukuxhumana okuvamile

Connessioni comuni DL16

DL16 Ukuhlanganisa
Ukuhlangana
I-DL16 njengenyoka ezimele

Ukuxhumanisa amayunithi amabili e-DL16

Qaphela: Amasignali kuwo womabili amayunithi e-DL16 (Okuphuma ku-1-8 no-9-16) kanye nawo womabili amayunithi e-ADA8200 (Ukuphuma 17-24 kanye no-25-32) achazwe ngokugcwele ekhasini le-M32 elithi 'Umzila/AES50 Okukhiphayo'. Okuphumayo kwe-DL16 yesibili kufanele kusethelwe kokuthi Out +8 kuyunithi ngokwayo.
Izilawuli ze-DL16

Izilawuli

1. I-PHANTOM LEDs ikhanya uma inkinobho ye-48V isetshenziswa esiteshini esithile.
2. Okokufaka kwe-MIDAS PRO kwemakrofoni/umugqa kwamukela amapulagi wesilisa we-XLR alinganayo.
3. Inkinobho ethi GAIN, lapho icindezelwa futhi ibanjiwe, ibonisa ukulungiselelwa kwenzuzo yokokufaka kwemakrofoni ekhethiwe njengamanje, okungase kulungiswe kusetshenziswa inkinobho ethi KHETHA/ADJUST.
4. I-DISPLAY ibonisa inombolo yesiteshi ekhethiwe, ukulungiselelwa kwenzuzo yayo, noma inomboloample rate ekucushweni kwe-Snake Master.
5. I-NETWORK LINK LEDs ikhanya ngokubomvu ukukhombisa ukuthi izimbobo ze-AES50 zixhunyiwe kodwa azivumelanisiwe, nokuluhlaza okukhanyayo ukukhombisa ukuthi zixhunyiwe futhi zivumelanisiwe.
6. Inkinobho engu-48 V ithumela amandla e-phantom kokokufaka imakrofoni ekhethiwe njengamanje, eboniswa inkinobho ekhanyisiwe uma isebenza.
7. STATUS LEDs zibonisa imodi yokusebenza yezici ezihlukahlukene. Bona Ishadi Lemodi Yokusebenza ukuze uthole imininingwane. I-HA LOCKED LED ikhombisa ukuthi ngaphambiliamp ukulungiswa kwenzuzo kuvinjwe i-M32 elawulayo. Ukuvula, vula ikhasi le-M32 Setup/Global bese ungahloli okuthi Okuthandwayo Okujwayelekile 'Khiya S.tagebox'.
8. Inkinobho ethi COFIG, uma icindezelwe futhi ibanjiwe, ivumela imodi yokusebenza yedivayisi ukuthi ilungiswe KHETHA/ADJUST knob. Bheka Ishadi Lemodi Yokusebenza ukuze uthole imininingwane.
9. KHETHA/HLELA i-knob iphenya eziteshini eziyi-16, ilungise inzuzo yokokufaka okukhethiwe manje, futhi ishintshe imodi yokusebenza. Phusha ngokuphindaphindiwe ukuze uskrole Okokufaka, Okuphumayo, iziteshi ze-P16, ukuphuma kwe-ADAT, kanye ne-Stage (kumodi ye-Snake Master kuphela).
10. I-LED METER ibonisa izinga lesiginali lesiteshi esikhethiwe njengamanje.
11. I-MONITORING LEVEL knob ilungisa izinga lokuphumayo kwe-PHONE.
12. Imiphumela ye-XLR yamukela amapulaki wesifazane we-XLR alinganayo.
13. I-Power switch ivula futhi ivale iyunithi.
14. Okokufaka kwe-USB kwamukela ipulaki yohlobo B ye-USB yezibuyekezo ze-firmware nge-PC.
15. Amachweba we-AES50 A no-B avumela ukuxhuma kunethiwekhi yeziteshi eziningi zedijithali ye-SuperMAC ngekhebula elivikelwe le-Cat-5e Ethernet elineziphetho ezinqanyuliwe ezihambisana ne-Neutrik
    I-etherCON. QAPHELA: Inkosi yewashi, ngokuvamile i-mixer yedijithali, kufanele ixhunywe ku-AES50 port A, kuyilapho i-s eyengeziwetagamabhokisi e-e azoxhunywa ku-port B.
16.  Imbobo ye-ULTRANET ithumela iziteshi ezingu-16 ohlelweni lokuqapha lomuntu siqu lwe-Behringer P-16.
17. Amajekhi e-ADAT OUT athumela iziteshi ze-AES50 17-32 emishinini yangaphandle ngentambo yokubona, noma ahlukanise okokufaka okungu-16 kwasendaweni ukuze kuqoshwe i-ADAT eqondile.
18. Ojeke be-MIDI IN/OUT bamukela izintambo ezijwayelekile ezingu-5-pin MIDI zokuxhumana kwe-MIDI ukuya nokusuka kukhonsoli ye-M32.

Ishadi Lemodi Yokusebenza ye-Midas DL16

Seq.	I-LED SN MASTER	iwashi lokuvumelanisa	I-LED SPLITTER	I-LED KUPHUMA +16	I-LED KUPHUMA +8	I-analog ye-XLR ngaphandle 1-8 ngaphandle	ISIKO ngo 1-8	ISIKO ngo 9-16	I-P-16 I-Ultranet ngo 1-16
1 (okuzenzakalelayo)		AES50 (console)				= AES50-A, ch01-ch08	= AES50-A ch17-ch24	= AES50-A ch25-ch32	= AES50-A ch33-ch48
2		AES50 (console)			on	= AES50-A ch09-ch16	= AES50-A ch17-ch24	= AES50-A ch25-ch32	= AES50-A ch33-ch48
3		AES50 (console)		on		= AES50-A ch17-ch24	= AES50-A ch17-ch24	= AES50-A ch25-ch32	= AES50-A ch33-ch48
4		AES50 (console)	on			= AES50-A, ch01-ch08	= Local In 01 – 08	= Local In 09 -16	= Local In 01 – 16
5		AES50 (console)	on		on	= AES50-A ch09-ch16	= Local In 01 – 08	= Local In 09 -16	= Local In 01 – 16
6		AES50 (console)	on	on		= AES50-A ch17-ch24	= Local In 01 – 08	= Local In 09 -16	= Local In 01 – 16
7	on	48 kHz (int)				= AES50-A, ch01-ch08	= AES50-A, ch01-ch08	= AES50-A ch09-ch16	= AES50-A ch01-ch16
8	on	44.1 kHz (int)				= AES50-A, ch01-ch08	= AES50-A, ch01-ch08	= AES50-A ch09-ch16	= AES50-A ch01-ch16
9	on	48 kHz (int)	on			= AES50-A, ch01-ch08	= Local In 01 – 08	= Local In 09 -16	= Local In 01 – 16
10	on	44.1 kHz (int)	on			= AES50-A, ch01-ch08	= Local In 01 – 08	= Local In 09 -16	= Local In 01 – 16

DL16 Ukuqalisa

Ukuqalisa

1. Ngaphambi kokuvula iyunithi, yenza konke ukuxhumana okulalelwayo nokwedijithali.
2. Vula amandla.
   
3. Ukucushwa okuzenzakalelayo kuyasebenza uma zonke izimo ze-LED ezingenhla kwenkinobho ye-CONFIG evaliwe (bona i-Seq. 1 kokuthi Ukusebenza
   Ishadi Lemodi). Uma uhlelo lwakho lokusebenza ludinga ukusethwa okuhlukile kokukhiphayo, cindezela bese ubamba inkinobho ethi CONFIG ukuze ufake imodi yokumisa. Ngenkathi ucindezela i
   Inkinobho ethi COFIG, vula inkinobho ethi KHETHA/HLANGANISA ukuze uskrole ezintweni. Ungakhetha kulokhu okulandelayo:
   • Bandakanya umsebenzi we-SN MASTER ukuze uqoke iyunithi eyinhloko lapho usebenzisa amayunithi amabili e-DL16 kuhlelo lokusebenza lwenyoka ezimele. Lokhu kutholakala ngamamodi angu-4, 44.1 kHz kanye no-48 kHz, ngayinye enemodi ye-Splitter ehlanganisiwe noma ekhishiwe.
   • Bandakanya umsebenzi we-SPLITTER ukuze uthumele amasiginali wokufaka wasendaweni ayi-16 ngokuqondile kumajack e-ADAT OUT kanye ne-P16. Lapho umsebenzi we-SPLITTER ukhishwa, ama-jacks e-ADAT OUT aphatha iziteshi ze-AES50 17-32 kanye ne-P16 ithwala iziteshi 33-48.
   • Khetha ukuthi ingabe ojeke be-OUTPUT 1-8 baphatha iziteshi ze-AES50 1-8 (ama-LED avaliwe), 9-16, noma 17-24 ngokubandakanya umsebenzi we-OUT +8 noma OUT +16.
4. Dedela inkinobho ye-CONFIG ukuze uphume kumodi yokumisa. Bona Ishadi Lemodi Yokusebenza ukuze uthole imininingwane eyengeziwe.
5. Cindezela ngokuphindaphindiwe inkinobho ethi KHETHA/ADJUST kuze kube uhlangothi lwesokunxele lwesibonisi lubonisa ukuthi "Ngena". Vula inkinobho ethi KHETHA/HLANGANISA ukuze ukhethe okokufaka 1-16.
6. Cindezela inkinobho engu-48 V ukuze uvule/uvale amandla ephantom yesiteshi esikhethiwe, uma kunesidingo.
7. Cindezela inkinobho ethi GAIN. Inkinobho izokhanya, futhi inzuzo manje ingalungiswa ngenkinobho ethi KHETHA/ADJUST. Jikela ifindo kwesokudla kuze kube yilapho unomsindo omkhulu ekukhulumeni noma ekudlaleni kwakho ubangele i -9 dB LED ukuthi ikhanye kancane kumitha.
   
8. Ngama-headphone axhunywe kujekhi yama-PHONES, vula iknobhu eseduze ye-MONITORING LEVEL ibe sezingeni lokulalela elinethezekile.

QAPHELA: Sicela uqinisekise ukuthi uxhumano lwakho oluthile lwe-AES50 luhlinzeka ngokusebenza okuzinzile ngaphambi kokusebenzisa imikhiqizo ekusebenzeni okubukhoma noma esimweni sokurekhoda. Ibanga eliphezulu lokuxhumana kwe-AES50 CAT5 lingamamitha ayi-100 (330 amafidi). Sicela ucabange ukusebenzisa ukuxhumana okufushane lapho kungenzeka khona ukuze uthole imajini yokuphepha. Ukuhlanganisa izintambo ezi-2 noma ngaphezulu nezixhumi ezinwetshiwe kunganciphisa ukwethembeka nebanga eliphakeme phakathi kwemikhiqizo ye-AES50. Ikhebula elingavikelekile (i-UTP) lingasebenza kahle ezinhlelweni eziningi, kodwa lihlanganisa ingozi eyengeziwe yezinkinga ze-ESD. Siyaqinisekisa, ukuthi yonke imikhiqizo yethu izosebenza njengoba kucacisiwe nge-50 m ye-Klark Teknik NCAT5E-50M, futhi sincoma ukusebenzisa ikhebula lekhwalithi efanayo, kuphela. I-Klark Teknik futhi inikeza i-DN9610 AES50 Repeater ebiza kakhulu noma i-DN9620 AES50 Extender ezimeni lapho kudingeka khona ukugijima kwamakhebula amade kakhulu.

Imininingwane

Iyacubungula
Iziguquli ze-A/D (8-channel, 24-bit @ 44.1 / 48 kHz)	114 dB ububanzi obuguquguqukayo (A-weighted)
Iziguquli ze-D/A (i-stereo, i-24-bit @ 44.1 / 48 kHz)	120 dB ububanzi obuguquguqukayo (A-weighted)
Ukubambezeleka kwe-I/O kwenethiwekhi (stagebox in> console processing *> stagukuphuma kwe-ebox)	1.1 ms

Izixhumi
Okokufaka kwe-XLR, i-mic preamps	16
Imiphumela ye-XLR	8
Imiphumela yefoni, i-1/4 ″ TRS	1 (inkawu)
AES50 amachweba, SuperMAC, NEUTRIK etherCON	2
Isixhumi se-P-16, i-Ultranet (awekho amandla ahlinzekiwe)	1
Okokufaka / ukuphuma kwe-MIDI	1-Jan
Imiphumela ye-ADAT Toslink (2 x 8 Ch)	2
Uhlobo lwe-USB B, iphaneli engemuva, yezibuyekezo zesistimu	1

I-Mic Input Characteristics (MIDAS PRO)
I-THD + umsindo, @ ubunye inzuzo, 0 dBu ngaphandle	<0.01% akusindiswanga
I-THD + umsindo, @ +40 dB inzuzo, 0 dBu ngaphandle	<0.03% akusindiswanga
I-impedance yokufaka i-XLR, i-unbal. / bal.	10 kΩ / 10 kΩ
Izinga lokufaka elingafakwanga isiqeshana, i-XLR	+23 dBu
Amandla e-Phantom, ashintshekayo kokufaka ngakunye	48 V
Umsindo wokufaka olinganayo @ +40 dB inzuzo, (umthombo we-150R)	-125 dBu, 22 Hz – 22 kHz engenasisindo
I-CMRR, XLR, @ inzuzo yobunye (okujwayelekile)	> 70dB
CMRR, XLR, @ 40 dB inzuzo (ejwayelekile)	> 90dB

Izici Zokufaka / Zokukhipha
Ukusabela kwemvamisa @ 48 kHz sampisilinganiso	0 kuya ku-1 dB 20 Hz kuya ku-20 kHz
I-Dynamic range, i-analogue phakathi ukuya ku-analogue out	107 dB (22 Hz – 22 kHz ngaphandle kwesisindo)
Ibanga eliguqukayo le-A/D, preamp nesiguquli (esijwayelekile)	109 dB (22 Hz ukuya ku-22 kHz ngaphandle kwesisindo)
Ibanga eliguqukayo le-D/A, isiguquli kanye nokuphumayo (okujwayelekile)	110 dB (22 Hz – 22 kHz ngaphandle kwesisindo)
Ukwenqatshwa kwenkulumo ephambene @ 1 kHz, iziteshi eziseduze	100db
Izinga lokukhipha, XLR, nom./max.	+4 dBu / +21 dBu
Umphumela wokukhipha, i-XLR, i-unbal. / bal.	50 Ω / 50 Ω
Amafoni' okukhipha impedance/leveli	40 Ω / +21 dBu (mono)
Izinga lomsindo elisele, ngaphandle kwe-1-8 XLR, inzuzo yobunye	-86 dBu, 22 Hz – 22 kHz engenasisindo

Izinkomba
Bonisa	Amadijithi angu-4, izingxenye ezingu-7, i-LED
Ama-LED wesimo sangaphambili	I-AES50-A, ebomvu/eluhlaza I-AES50-B, ebomvu/eluhlaza HA Ikhiyiwe, ibomvu I-SN Master, eluhlaza I-Splitter, i-orange Phuma +16, osawolintshi Phuma +8, osawolintshi
Imitha	Sig, -30 dB, -18 dB, -12 dB, -9 dB, -6 dB, -3 dB, Isiqeshana
Iphaneli yangemuva	Imodi yokuhlukanisa, i-orange

Amandla
Ukunikezwa kwamandla we-switch-mode autorange	I-100-240 V (50/60 Hz)
Ukusetshenziswa kwamandla	45 W

Okomzimba
Ubukhulu	482 x 225 x 89 mm (19 x 8.9 x 3.5″)
Isisindo	4.7 kg (10.4 lbs)

*kuhlanganise. konke ukucutshungulwa kwesiteshi namabhasi, okungabala. faka imiphumela kanye nokulibaziseka komugqa

Olunye ulwazi olubalulekile

Ulwazi olubalulekile

1. Bhalisa ku-inthanethi. Sicela ubhalise isisetshenziswa sakho esisha se-Music Tribe ngemva nje kokusithenga ngokuvakashela ku-musictribe.com. Ukubhalisa ukuthenga kwakho usebenzisa ifomu lethu elilula le-inthanethi lisisiza ukuthi sicubungule izimangalo zakho zokulungisa ngokushesha nangempumelelo. Futhi, funda imigomo nemibandela yewaranti yethu, uma ikhona.
2. Ukungasebenzi kahle. Uma kwenzeka Umdayisi Ogunyaziwe Wesizwe Sakho Somculo engekho endaweni yakini, ungathinta Umgcwalisi Ogunyaziwe Wesizwe Sakho sezwe lakini esohlwini ngaphansi kokuthi “Usekelo” ku-musictribe.com. Uma kwenzeka izwe lakini lingafakwa ohlwini, sicela uhlole ukuthi inkinga yakho ingaxazululwa yini “Ngokwesekwa Kwe-inthanethi” kwethu okungase kutholakale ngaphansi kokuthi “Usekelo” ku-musictribe.com. Noma, sicela uthumele isimangalo sewaranti eku-inthanethi ku-musictribe.com NGAPHAMBI kokubuyisela umkhiqizo.
3. Izixhumanisi zamandla. Ngaphambi kokuxhuma iyunithi kusokhethi kagesi, sicela uqinisekise ukuthi usebenzisa ivolumu yamapayipi alungiletage yemodeli yakho ethile. Ama-fuse anephutha kufanele ashintshwe kufakwe ama-fuse ohlobo olufanayo nokulinganisa ngaphandle kokukhetha.

UKUXHUMANA KWEZIMALI
UKUTHOBELA IKHOMISHANE
ULWAZI
Midas
DL16

Igama Leqembu Elizibophezele:	I-Music Tribe Commercial NV Inc.
Ikheli:	5270 Street Street, I-Las Vegas NV 89118, I-united states
Inombolo yocingo:	+1 702 800 8290

DL16
Lesi sisetshenziswa sihloliwe futhi satholwa ukuthi sithobela imikhawulo yedivayisi yedijithali Yekilasi B, ngokuvumelana nengxenye 15 Yemithetho ye-FCC. Le mikhawulo iklanyelwe ukuhlinzeka ngokuvikeleka okufanele ekuphazanyisweni okuyingozi ekufakweni kwendawo yokuhlala. Lesi sixhobo sikhiqiza, sisebenzise futhi singakhipha amandla efrikhwensi yomsakazo futhi, uma singafakiwe futhi sisetshenziswa ngokuhambisana nemiyalelo, singadala ukuphazamiseka okuyingozi ezokuxhumana ngomsakazo. Nokho, asikho isiqinisekiso sokuthi ukuphazamiseka ngeke kwenzeke ekufakweni okuthile. Uma lesi sisetshenziswa sidala ukuphazamiseka okuyingozi emsakazweni noma kumabonakude, okunganqunywa ngokucisha nokuvula okokusebenza, umsebenzisi uyakhuthazwa ukuthi azame ukulungisa ukuphazamiseka ngesinyathelo esisodwa noma ngaphezulu kwezilandelayo:
• • Hlela kabusha noma hambisa uthi olwamukelayo.
• • Khulisa ukuhlukana phakathi kwemishini nomamukeli.
• Xhuma okokusebenza endaweni esekhejini ehlukile kuleyo lapho umamukeli axhumeke khona.
• Xhumana nomthengisi noma uchwepheshe werediyo/TV onolwazi ukuze uthole usizo.
Le divayisi ithobela Ingxenye 15 yemithetho ye-FCC. Ukusebenza kungaphansi kwemibandela emibili elandelayo:
(1) lolu cingo lungase lungabangeli ukuphazamiseka okuyingozi, futhi
(2) lolu cingo kufanele lwamukele noma yikuphi ukuphazamiseka okutholiwe, okuhlanganisa ukuphazamiseka okungase kubangele ukusebenza okungafuneki.
Ulwazi olubalulekile:
Izinguquko noma ukuguqulwa kwezinto zokusebenza ezingagunyazwanga ngokucacile i-Music Tribe zingasusa igunya lomsebenzisi lokusebenzisa okokusebenza.
Ngalokhu, i-Music Tribe imemezela ukuthi lo mkhiqizo uhambisana ne-Directive 2014/35 / EU, Directive 2014/30 / EU, Directive 2011/65 / EU and Amendment 2015/863 / EU, Directive 2012/19 / EU, Regulation 519 / 2012 REACH SVHC kanye ne-Directive 1907/2006 / EC.
Umbhalo ogcwele we-EU DoC uyatholakala ku- https://community.musictribe.com/ Omele i-EU: I-Music Tribe Brands DK A/S Ikheli: Ib Spang Olsens Gade 17, DK – 8200 Aarhus N, Denmark

Amadokhumenti / Izinsiza

Okokufaka kwe-MIDAS D L16 8 Okukhiphayo Stage Box [pdf] Umhlahlandlela Womsebenzisi I-D L16 Okokufaka 8 Okukhiphayo Stage Ibhokisi, D L16, Okokufaka 8 Okukhiphayo Stage Box

Izithenjwa

• Imaniwali yosebenzisayo