GARNET T-DP0301-A SEELEVEL UKUFIKELELA iNdawo yeDatha kunye neManyuwali yoMsebenzisi wokuBonisa ukude

ISAHLUKO SOKU-1 – INTSHAYELELO

Sivuyisana nawe ngokuthenga izixhobo zeGarnet SEELEVEL Access™ Data Portal. I-SEELEVEL Access™ incoma i-SEELEVEL Annihilator™ 806-B, 806-Bi, okanye i-SEELEVEL Special™ 808-P2 kunye ne-SeeLeveL ProSeries II 810-PS2 iigeyiji ngokubonelela ngevolumu eyongezelelweyo yokufunda kwikhebhu yelori yakho.

Ukongeza ekuboneleleni ngokufunda kwinqanaba letanki, i-SEELEVEL Access™ ibonelela nge-4-20 mA yemveliso ye-analog ngokomlinganiselo wevolumu yolwelo olubonisiweyo. Le mveliso ye-analog ingasetyenziselwa ukunxibelelana kwinqanaba letanki kwezinye iziqwenga zezixhobo ezifana neenkqubo zolawulo lweenqwelomoya okanye iZiXhobo zokuLonwa kwe-Electronic (ELD).

Ixabiso elipheleleyo lomlinganiselo wemveliso ye-analog inokumiselwa ngokusebenzisa amaqhosha angasemva kwesiboniso, akukho zixhobo ezongezelelweyo ezifunekayo ukulinganisa.

I-SEELEVEL Access™ iqulethe i-serial ye-RS-232 ujongano oluvumela ulawulo lwezithuthi okanye iinkqubo ze-ELD ukuqokelela idatha yevolumu yamanzi kwigeyiji. I-interface igcwele i-duplex kwaye iqulethe iimpawu zokhuseleko ukukhusela ukufikelela okungagunyaziswanga.

Umboniso we-SEELEVEL Access™ uyilelwe ukuba umelane nokungcangcazela kunye nokothuka okufunyenwe kwizicelo eziphathwayo. Ngelixa i-808-P2 kunye ne-810-PS2 isebenza kwiibhetri zangaphakathi, (i-12 volt amandla eloli isetyenziselwa ukusebenzisa ukukhanya kwangasemva kunye nama-alamu angaphandle), umboniso we-SEELEVEL Access usebenza kumandla weloli ye-12V.

ISAHLUKO SESI-2 – IMICIMBI

I-SEELEVEL Access™ yenzelwe ngokukodwa usetyenziso oluthile kunye neempawu ezithile:
Iimpawu zoFikelelo zeSEELEVEL eziqhelekileyo

1. Umqondiso phakathi kwe-806-B, 806-Bi, 808-P2 okanye i-810-PS2 kunye ne-SEELEVEL Access™ ifakwe kwikhowudi yedijithali ukuze umgca wesignali ube nokuqhagamshelwa kusetyenziswa iplagi yetreyila yephini eli-7.
2. Umboniso usebenza kumandla welori ye-volt ye-12, kwaye udonsa ngaphantsi kwe-150 mA.
3. Uyilo lwedijithali yonke (ngaphandle kwe-4-20 mA output) isusa ukufunda ukuqhutyelwa okanye ukuthotywa, ukuqinisekisa ukuchaneka kwexesha elide phantsi kwazo zonke iimeko zokusebenza.
4. Ukusebenza ukusuka -40 °C ukuya +60 °C (-40 °F ukuya +140 °F) ubushushu bendawo.
5. Ufakelo olulula kunye nenkonzo kunye newaranti elinganiselweyo yonyaka.
   UFikelelo olongezelelweyo lwe-SEELEVEL Iimpawu ze-T-DP0301-A
6. Ukukhutshwa kwe-analog 4-20 mA, kunye ne-4 mA ehambelana nomthamo obonisiweyo we-zero, kunye ne-20 mA ehambelana nomlinganiselo opheleleyo obonakalisiweyo wevolumu ehlelwe kwisiboniso esikude.
7. I-RS-232 i-serial interface ekhoyo ukuqhagamshela kwiindidi ezahlukeneyo ze-ELD okanye iinkqubo zolawulo lwezithuthi.
8. I-SEELEVEL Access™ ibonelela ngesiboniso se-LED ekulula ukufundeka ngaphakathi kwe-compact, edge-view Indawo ebiyelweyo, elungiselelwe ukunyuswa komphezulu we-dash okanye ngaphezulu kwekhonsoli. Umboniso ugcinwe kwindawo evaliweyo ye-aluminium 2.7" ububanzi x 1.1" phezulu x 3.4" ubunzulu (68 mm ububanzi x 29 mm ukuphakama x 87 mm ubunzulu).
9. Ukutshintsha iqhosha le-dimmer lenza ukuba umsebenzisi alawule ukuqaqamba.
10. Ufakelo lombane olulula lwe-6 - amandla e-12V (obomvu), umhlaba (omnyama), umqondiso we-gauge (ophuzi), i-analog output (emhlophe / eluhlaza okwesibhakabhaka), i-serial receive (purple) kunye ne-serial transmit (grey).

ISAHLUKO SESI-3 – IIDARAMA ZOKUNXA IINGXELO

I-SEELEVEL Access™ yenzelwe ukufakwa lula nge-806-B, 806-Bi, 808-P2 okanye 810-PS2 uthotho lwe-SEELEVEL™ geji. Imiyalelo yokufakela iyafumaneka kwi-intanethi www.garnetinstruments.com. I-SEELEVEL Access™ Isiboniso esikude kulula ukuyifaka:

Umzobo we-808-P2 Wiring

I-810-PS2 i-Wiring Diagram

I-806-B yoMzobo woNcingo

I-806-Bi Wiring Diagram

ISAHLUKO 4 – BONISA UCWANGCISO

Umboniso we-SEELEVEL Access™ ubonisa inqanaba letanki ngokuphinda ulwazi oluboniswe kwi-806-B, 806-Bi, 808-P2 okanye i-810-PS2 gauge. I-4-20 mA imveliso ye-analog ibalwa ukusuka kwinqanaba lokubonisa kunye ne-4 mA imveliso ehambelana nenqanaba lokubonisa i-zero, kunye ne-20 mA imveliso ehambelana nenqanaba elipheleleyo elicwangcisiweyo kwi-SEELEVEL Access™ display.

Umzekeloample, ukuba isikali esipheleleyo sicwangciswe ukuba sibe yi-500.0, ngoko ixabiso lokubonisa le-400.0 liya kubangela ukukhutshwa kwe-analog ye-16.80 mA. Umboniso uya kuqonda indawo yedesimali kwaye ulungelelanise imveliso ngokufanelekileyo, ngoko ke kule example ixabiso lokubonisa le-400 liya kubangela kwakhona imveliso ye-analog ye-16.80 mA.

Ukuseta umgangatho opheleleyo wesikali:

1. Qinisekisa ubuninzi bevolyum enokuboniswa kwaye ukhethe isixa esipheleleyo sesikali esilingana okanye esikhulu kunolo mthamo.
2. Cinezela omabini amaqhosha OKULANDELAYO kunye ne-UP/ENTER kwiphaneli yangasemva, umboniso uya kubonisa i-ACAL. Wakhulule omabini amaqhosha.
3. Umboniso uza kubonisa ulungelelwaniso olukhoyo kunye nedijithi yasekhohlo eqaqambileyo. Cofa iqhosha elithi UP/ENTER ukutshintsha idijithi eqaqambileyo. Cofa iqhosha leMENU OKULANDELAYO ukuya kwinani elilandelayo.
4. Cwangcisa onke amasuntswana ama-4, emva koko ucinezele OKULANDELAYO MENU kwakhona ukuseta indawo yokugqibela, iya kuqaqamba ukubonisa ukuba ikhethiwe. Cinezela iqhosha elithi UP/ENTER ukukhetha nokuba yi-x.xxx, xx.xx, xxx.x okanye akukho decimal. Ukufumana ukuchaneka okuphezulu kwemveliso ye-analog, zama ukusebenzisa onke amanani ama-4 afana nama-500.0 endaweni yama-500 kuphela.
5. Emva kokuba idesimali iseti, cinezela OKULANDELAYO MENU kwakhona, umboniso uya kubonisa uStor. Cofa UP/ENTER ukugcina ulungelelwaniso kwaye uphume kwimenyu yokuseta. Umboniso uya kuqhubeka nokubonisa iStor okomzuzwana emva koko uya kubonisa kwenziwe umzuzwana. Emva koko umsebenzi oqhelekileyo uqalisa kwakhona.
6. Ukuba awufuni ukugcina ulungelelwaniso, cinezela OKULANDELAYO IMENU kwakhona kwaye umboniso uzakubonisa Abrt. Cofa UP/ENTER ukulamba ephuma kwimenyu yokulinganisa ngaphandle kokugcina.
7. Ukuba ucinezela OKULANDELAYO I MENU kwakhona ukusuka kumboniso we Abrt, imenu izakubuyela ekuqaleni ngedijithi yasekhohlo ekhethiweyo ngokuqaqamba.
8. Ukuba ulungelelwaniso olupheleleyo lwesikali lungaphantsi kwe-103, isiboniso asiyi kukwazi ukubala ulungelelwaniso olusebenzayo, kwaye siya kubonisa cErr (impazamo yokulinganisa) emva kwemizuzwana embalwa. Ulungelelwaniso olukhoyo luya kugcinwa, kwaye umboniso uya kubuyela ekusebenzeni okuqhelekileyo.

Ukuya view ulungelelwaniso olukhoyo:

1. Cinezela nokuba iMENU ELANDELAYO okanye PHEZULU/ENTER iqhosha (kodwa hayi zombini) kwiqela lenjongo yangasemva, umboniso uzakubonisa umlinganiselo okhoyo wokulinganisa umlinganiselo we-analog ngelixa iqhosha libanjwe phantsi. Khupha iqhosha ukubuyela ekusebenzeni okuqhelekileyo.

Ukuvavanya imveliso ye-analog:

1. Ngelixa iqhosha le-MENU ELILANDELAYO okanye PHEZULU/ENTER kwindawo yolawulo yangasemva licinezelwe, umboniso uya kubonisa ulungelelwaniso olupheleleyo lwesikali kunye nemveliso ye-analog iya kwisikali esipheleleyo (20 mA). Oku kungasetyenziselwa ukuvavanya okanye ukulinganisa izixhobo eziqhagamshelwe kwimveliso ye-analog.
2. Ngelixa umboniso ukwimo yokulinganisa (engeniswa ngokucinezela zombini i-MENU ELANDELAYO kunye ne-UP/ENTER amaqhosha) imveliso ye-analog iya kuba kwi-4mA.

ISAHLUKO SESI-5 – ISITHUBA-MNTU ESINGQONGILEYO

Bona iNqanaba le-ELD yeFomathi yePortal kunye neFomathi yoMqondiso

• Ifomati yesignali exhaswayo yi-bidirectional serial (i-TX eyahlukileyo kunye nemigca ye-RX), i-RS232 voltagamanqanaba e, 9600 baud, 8 bit, akukho parity, 1 stop bit.
• Yonke imiyalezo ithobela le fomati ilandelayo: [qalisa ulandelelwano] [itotali yenani leebhayithi ezisemyalezo] [i-ID yomyalezo] [umthwalo wokuhlawula – ngokuzikhethela] [CRC] [ukumisa ulandelelwano]
• Zonke iiparamitha ezininzi zebhayithi zigqithiselwa kwi-big-endian (MSB kuqala)
• Qala ulandelelwano: [0xFE][0xFE][0x24]
• Lilonke inani leebytes kumyalezo (1 byte)
• Isazisi somyalezo (byte enye)
• Ukuhlawula (ukhetho ngokuxhomekeke kumyalezo)
• I-CRC (i-byte eyi-1) = isixa esithe ngqo sazo zonke ii-byte ezanduleleyo, zicuthiwe zibe yi-1 byte
• Misa ulandelelwano: [0xFF][0xFF][0x2A]

SeeLeveL Query Message (ELD -> SeeLeveL)

• Ixabiso: 0x00
• Ivumela i-ELD ukuba ibuze isixhobo seSeeLeveL
• [0xFE][0xFE][0x24][0x09][0x00][0x29][0xFF][0xFF][0x2A]

Jonga iNqanaba leMbuzo (Jonga iNqanaba-> I-ELD)

• Ixabiso: 0x01
• I-SeeLeveL iphendula nge-ID yemodeli (1 byte), i-H / W Rev (1 byte), i-S / W Rev (i-2 bytes), amandla e-alarm (1 byte), kunye nenkxaso ye-SN (1 byte). Ukuba ifowuni ye-SeeLeveL ixhasa inombolo ye-serial ekhethekileyo, iya kulandela (i-8 bytes ubude).
• Example: i-ID yemodeli ye-SeeLeveL = 0x01, i-hardware rev = `E' (0x45), i-software enkulu rev ​​= 0x05, i-rev encinci = 0x09, akukho mandla e-alarm = 0x00 (0x01 = i-alam ekwaziyo), inombolo ye-serial exhaswayo = 0x01 (inombolo ye-serial ayikho ixhaswa = 0x00), kunye nenombolo yothotho = 0x0102030405060708:
• [0xFE][0xFE][0x24][0x17][0x01][0x01][0x45][0x05][0x09][0x00][0x01] [0x01][0x02][0x03][0x04][0x05][0x06][0x07][0x08][0xB1][0xFF][0xFF] [0x2A]

SeeLeveL Handshake Demand Message (SeeLeveL -> ELD)

• Ixabiso: 0x02, 1 byte payload
• I-ELD kufuneka iphendule ngempendulo enekhowudi efanelekileyo ukuze iqalise okanye iqhubeke nokuhanjiswa okanye ukusasazwa kwamanqanaba olwelo ukusuka kwisixhobo seSeeLeveL. Iimfuno zokuxhawula izandla ziya kusasazwa ngamaxesha athile.
• Example:
• [0xFE][0xFE][0x24][0x0A][0x02][0x3E][0x6A][0xFF][0xFF][0x2A]

ELD Handshake Response (ELD -> SeeLeveL)

• Ixabiso: 0x03, 1 byte payload
• Ukubala impendulo, umthwalo ohlawulwayo ovela kwi-SeeLeveL Handshake Demand Message isetyenziswa njengedilesi/i-offset ukulanda imixholo yetafile yokujonga:
• Impendulo kwi-exampngasentla: ·
• [0xFE][0xFE][0x24][0x0A][0x03][0x85][0xB2][0xFF][0xFF][0x2A]
• Qhagamshelana nezixhobo zeGarnet kwi-1-800-617-7384 okanye kwi info@garnetinstruments.com ukuseka ubudlelwane obufanelekileyo bokusebenza. Nje ukuba oku kumiselwe, itafile yokuphendula ngokuxhawula izandla iya kubonelelwa.

Thumela iNqanaba loMyalezo (i-ELD -> SeeLeveL)

• Ixabiso: 0x04, akukho mthwalo
• I-SeeLeveL iphendula ngenqanaba lolwelo olunye okanye umyalezo wokubamba ngesandla.
• [0xFE][0xFE][0x24][0x09][0x04][0x2D][0xFF][0xFF][0x2A]

Qalisa iNqanaba loSasazo loMyalezo (ELD -> SeeLeveL)

• Ixabiso: 0x05, akukho mthwalo
• I-SeeLeveL iphendula ngenqanaba lolwelo okanye ngomyalezo wokubamba ngesandla.
• [0xFE][0xFE][0x24][0x09][0x05][0x2E][0xFF][0xFF][0x2A]

Misa iNqanaba loSasazo loMyalezo (ELD -> SeeLeveL)

• Ixabiso: 0x06, akukho mthwalo
• I-SeeLeveL iya kurhoxisa naluphi na olunye usasazo lwenqanaba lolwelo.
• [0xFE][0xFE][0x24][0x09][0x06][0x2F][0xFF][0xFF][0x2A]

Jonga iNqanaba loMbuzo weAlarm yoMyalezo weNqanaba loLiquid (ELD -> Jonga iNqanaba)

• Ixabiso: 0x07, akukho mthwalo
• I-SeeLeveL iya kuphendula ngempendulo yenqanaba le-alamu yolwelo okanye impendulo yempazamo ukuba umsebenzi we-alamu awuxhaswanga.
• [0xFE][0xFE][0x24][0x09][0x07][0x30][0xFF][0xFF][0x2A] Bona iNqanabaL iNqanaba lokuPhendula kwe-Alam yoLiquid (SeeLeveL -> ELD)
• Ixabiso: 0x08, 7 byte payload
• I-SeeLeveL iphendula ngenqanaba le-alam yolwelo (i-4 bytes = int32 engabhalwanga), inani lamanani ekunene kwedesimali (1 byte), uhlobo lwe-alam (1 byte; ephezulu = 0x01, ephantsi = 0x00), nokuba inqanaba lolwelo likhona ngoku. i-alarm (1 byte; i-alarm esebenzayo = 0x01, akukho alarm = 0x00).
• Example: inqanaba le-alamu yolwelo = 347.56, uhlobo lwe-alamu = inqanaba eliphantsi, i-alamu iyasebenza:
• [0xFE][0xFE][0x24][0x10][0x08][0x00][0x00][0x87][0xC4][0x02][0x00] [0x01][0x86][0xFF][0xFF][0x2A]

Bona iNqanaba loMbuzo woMyalezo weAlarm (ELD -> SeeLeveL)

• Ixabiso: 0x09, akukho mthwalo
• I-SeeLeveL iya kuphendula ngesimo se-alam yangoku okanye impendulo yempazamo ukuba umsebenzi we-alamu awuxhaswanga.
• [0xFE][0xFE][0x24][0x09][0x09][0x32][0xFF][0xFF][0x2A]

Jonga iNqanaba loMbuzo weMbuzo yeAlarm yeMpendulo (Jonga iLeveL -> ELD)

• Ixabiso: 0x0A, 1 byte payload
• I-SeeLeveL iphendula ngesimo se-alarm yangoku (i-1 byte; i-alamu esebenzayo = 0x01, akukho alarm = 0x00).
• Example: ialam iyasebenza:
• [0xFE][0xFE][0x24][0x0A][0x0A][0x35][0xFF][0xFF][0x2A]

SeeLeveL imposiso impendulo (BonaLeveL -> ELD)

• Ixabiso: 0x0F , 1 byte payload
• SeeLeveL ikhupha le mpendulo ukuba umyalelo/umyalezo awuxhaswanga. Umvuzo = ikhowudi yomyalezo engaxhaswayo.
• Example: I-ELD ngaphambili ikhuphe i-SeeLeveL Query Alarm Liquid Level Message (0x07) kwisixhobo se-SeeLevel esingaxhasi ii-alam:
• [0xFE][0xFE][0x24][0x0A][0x0F ][0x07][0x40][0xFF][0xFF][0x2A]

Bona iNqanaba loMlayezo weNqanaba loLiquid (Bona iLeveLeveL -> ELD)

• Ixabiso: 0x10, 6 okanye 7 byte payload, kuxhomekeke ekubeni ii-alam ziyaxhaswa
• I-SeeLeveL ihambisa umgangatho wolwelo (i-4 bytes = int32 engasayinwanga), inani lamanani ekunene kwedesimali (1 byte), imeko yempazamo yamehlo (1 byte), kunye nemo ye-alam (okwangoku esebenzayo = 0x01, hayi kwimo ye-alam = 0x00) . Indawo ye-alam yesimo sokuzikhethela kwaye ayihanjiswa sisixhobo se-SeeLevel esingaxhasi ii-alam. Isimo sempazamo ye-Optical: akukho kukhanya = 0x00, izinga lokukhanya eliphantsi = 0x01, ukukhanya kwelanga = 0x02, akukho mpazamo = 0x10. Kwimeko apho imeko yempazamo yokubona AYIKHO kwimpazamo, umgangatho wolwelo/ inani lamasuntswana ekunene kwedesimali alihoywa.
• Example: inqanaba lolwelo = 1,083.1, akukho mpazamo yamehlo, ii-alamu azixhaswanga.
• Kwinqanaba le-liquid, i-4 bytes yokuqala ye-payload imele ixabiso le-hex kwinqanaba, kungekhona ixabiso le-BCD.
• [0xFE][0xFE][0x24][0x0F][0x10][0x00][0x00][0x2A][0x4F][0x01][0x10] [0xC9][0xFF][0xFF][0x2A]

Usasazo:

• Yenziwe emva kolwamkelo lwedatha nganye (elungileyo okanye embi) okanye akukho signali yokuphuma kwexesha kwi-808P2 kunye ne-810PS2 iigeji. Yenziwe emva kwe-8 yokuhanjiswa kwedatha okuyimpumelelo kwi-806B/806Bi gauges.
• Rhoqo ngosasazo oluyi-25 (malunga nemizuzwana engama-20) isicelo sokuxhawulana sithunyelwa ukuvumela usasazo oluqhubekayo.
• Ekunyusweni kombane, ukuba usasazo luvuliwe, isicelo sokuxhawulana sithunyelwa ukuvumela usasazo.
• AKUFUNI ukuxhawula isandla ukumisa usasazo.
• Ukuba isicelo sokuxhawulana ngesandla asiphendulwanga ngokuchanekileyo, usasazo luyamiswa.
• Izicelo zokuQalisa kunye nokumisa uSasazo aziphendulwanga ngokuthe ngqo, ukuqala okanye ukumisa usasazo kukuqinisekisa.

I-ELD icela isiqinisekiso sokuxhawula isandla:

• Qala usasazo kwaye Thumela umgangatho wolwelo
• Isicelo sokuxhawula isandla senziwa ngalo lonke ixesha esinye sezi zicelo sifunyanwa. Ukuxhawula izandla kufuneka kuphendulwe ngaphakathi kwe-500ms, okanye impendulo ithathwa njengengekho mthethweni kwaye umyalezo wemposiso uya kuthunyelwa ukusuka kwi-SeeLeveL ukuya kwi-ELD kwiimpendulo zamva nje.

Ukuxhawula isandla:

• Isicelo esivela kwi-ELD samkelwa yi-SeeLeveL
• SeeLeveL iphendula ngesicelo sokuxhawula isandla
• I-ELD ithumela impendulo yokubamba isandla
• SeeLeveL ithumela impendulo kwisicelo sokuqala se-ELD ukuba impendulo yokuxhawulana ichanekile.

Iialamu azixhaswa okwangoku. Kwixesha elizayo, ukuba ngaba:

• Umxholo woMyalezo 0x08 yindawo yokuseta i-alamu, inqanaba eliphezulu okanye eliphantsi le-alamu, kunye nemeko ye-alamu yangoku.

Jonga iNqanaba loMbuzo wokuQhutywa kwesandla ngexesha loMyalezo woSasazo (ELD -> SeeLeveL)

• Ixabiso: 0x2D
• Oku kucela ukuxhawulana rhoqo, impendulo iboniswe ngezantsi.
• [0xFE][0xFE][0x24][0x09][0x2D][0x56][0xFF][0xFF][0x2A]

Ukuxhatshwa kwesandla rhoqo ngexesha leMpendulo yoSasazo (SeeLeveL -> ELD)

• Ixabiso: 0x2E, 1 byte payload
• I-frequency inokuqala ukusuka kwi-1 ukuya kwi-126 kusasazo ngesicelo sokuxhawula isandla. Inani liboniswa kwi-hex ukusuka ku-0x02 ukuya ku-0x7F (inani lilonke losulelo ngokuxhawula ngesandla, kubandakanywa nokuxhawula).
• Ifomathi yomyalezo, rhoqo ngama-20 (0x14):
• [0xFE][0xFE][0x24][0x0A][0x2E][0x14][0x6C][0xFF][0xFF][0x2A]

ISAHLUKO SESI-6 – ISIKHOKELO SOKUXHUMANISA INKINGA

Ukuchaneka:
Isiphumo se-analog sinokuchaneka kwe-± 0.25% yexabiso elipheleleyo, ngoko ke nayiphi na ixabiso lemveliso kufuneka libe ngaphakathi kwe-0.05 mA yexabiso "elilungileyo". Akukho luhlenga-hlengiso lomsebenzisi olunokwenziwa ukuguqula ukuchaneka.

Njengayo nayiphi na inkqubo yedijithali, kukho iimpazamo ezijikelezileyo kunye nokunqunyulwa kwenkqubo yezibalo. Nangona kunjalo, kuba i-SEELEVEL Access™ isebenzisa i-10 bit digital convertor ye-analog, inokuchaneka okwaneleyo ukuvumela ukuba isisombululo esipheleleyo selori yegeyiji sifezekiswe. Qaphela ukuba igewuji yelori ethumela idatha inesisombululo seebhithi ezisi-8 kuphela (1/3″ iinkqubo).

ISAHLUKO SESI-7 – INGCACISO

ISAHLUKO SE-8 – INGCACISO YENKONZO NEWARANTI

Iwaranti iya kusebenza kuphela ukuba iwaranti ibhalisiwe kwi-intanethi kubhaliso lweGarnet Instruments web iphepha.
Yiya kwi-intanethi ku garnetinstruments.com/support/ kwaye ukhethe "Register Warranty".

INKCAZELO YEWARANTY KWI-HARDWARE
Izixhobo zeGarnet ziqinisekisa ukuba izixhobo ezenziwe yiGarnet zingabinaziphene kwizinto eziphathekayo kunye nokusebenza phantsi kokusetyenziswa okuqhelekileyo kunye nenkonzo ixesha leminyaka emithathu ukususela kumhla wokuthengiswa kweGarnet okanye uMthengisi oGunyaziweyo. Ixesha lewaranti liya kuqala ukusuka kumhla wokuthenga okanye wofakelo njengoko kubonisiwe kwikhadi lewaranti. Phantsi kwezi ziqinisekiso, i-Garnet iya kuba noxanduva kuphela ngelahleko yokwenene okanye umonakalo owenziweyo kwaye ke ngokomlinganiselo wexabiso le-invoyisi ye-Garnet yemveliso. I-Garnet ayisayi kuba noxanduva kuyo nayiphi na imeko kwiintlawulo zabasebenzi ngomonakalo ongathanga ngqo, okhethekileyo, okanye ohambelana nomonakalo. IGarnet ayisayi kuba noxanduva kuyo nayiphi na imeko yokususwa kunye/okanye ukufakwa kwakhona kwesixhobo seGarnet esineziphene. Ezi ziqinisekiso aziyi kusebenza kuzo naziphi na iziphene okanye omnye umonakalo kuso nasiphi na isixhobo seGarnet esitshintshiweyo okanyeampyenziwe nguye nabani na ngaphandle kwabameli befektri yeGarnet. Kuzo zonke iimeko, iGarnet iya kugunyazisa kuphela iimveliso zeGarnet ezisetyenziselwa usetyenziso olwamkelweyo kwiGarnet nangokweenkcukacha zobugcisa zemveliso ethile. Ukongeza, iGarnet iya kuqinisekisa kuphela ezo mveliso zifakelweyo zaze zagcinwa ngokwemigaqo yemveliso yeGarnet.

UMDA KWIWARANTI
Ezi ziqinisekiso kuphela kweziqinisekiso, ezichaziweyo okanye ezichaziweyo, apho iimveliso zithengiswa khona yiGarnet kunye neGarnet ayenzi siqinisekiso sokurhweba okanye ukufaneleka kwayo nayiphi na injongo malunga neemveliso ezithengisiweyo. Iimveliso zegarnet okanye iinxalenye zayo ekucingelwa ukuba zineziphene ngumthengi ngexesha elibekiweyo lewaranti kufuneka ibuyiselwe kumthengisi, umsasazi wengingqi, okanye ngqo kwiGarnet ukuze ivavanywe kunye nenkonzo. Nanini na xa uvavanyo oluthe ngqo lwefektri, inkonzo okanye ukutshintshwa kuyimfuneko, umthengi kufuneka kuqala, ngeleta okanye ngefowuni, afumane iReturned Material Authorization (RMA) ngqo kwiGarnet Instruments. Akukho nto inokubuyiswa kwi-Garnet ngaphandle kwenombolo ye-RMA eyabelwe yona okanye ngaphandle kogunyaziso olufanelekileyo lwasefektri. Naziphi na iimbuyekezo kufuneka zibuyiswe iimpahla ezithunyelwa ngaphambili: Garnet Instruments, 286 Kaska Road, Sherwood Park, Alberta, T8A 4G7. Izinto ezibuyiswayo eziqinisekisiweyo ziya kulungiswa okanye zitshintshwe ngokwengqiqo yeGarnet Instruments. Naziphi na izinto zeGarnet eziphantsi koMgaqo-nkqubo weSiqinisekiso seGarnet ezithathwa njengezingenakulungiseka yiGarnet Instruments ziya kutshintshwa ngaphandle kwentlawulo okanye ikhredithi iya kukhutshwa ngokuxhomekeke kwisicelo somthengi.

Ukuba unalo ibango lewaranti okanye ukuba isixhobo sifuna ukunikezelwa, qhagamshelana nomthengisi wofakelo. Ukuba ufuna ukuqhagamshelana neGarnet, sinokufikelelwa ngolu hlobo lulandelayo:

CANADA Garnet Instruments 286 Kaska Road Sherwood Park, AB T8A 4G7 CANADA email: info@garnetinstruments.com

EUNITED STATES Garnet US Inc. 5360 Granbury Road Granbury, TX 76049 USA imeyile: infous@garnetinstruments.com

Amaxwebhu / Izibonelelo

I-GARNET T-DP0301-A UKUFIKELELA KWE-SEELEVEL I-Portal yedatha kunye nomboniso okude [pdf] Incwadi yokusebenzisa I-T-DP0301-A SEELEVEL iPortal yeDatha yokuFikelela kunye neSiboniso esikude, T-DP0301-A, SEELEVEL UKUFIKELELA kwiDatha yeDatha kunye nokuBonisa okuRemote, UKUFIKELELA KWE-SEELEVEL, iPortal yeDatha kunye neSiboniso esiRemote, iPortal yeDatha, isiboniso esikude

Iimbekiselo

• Incwadi yokusebenzisa