I-AES GLOBAL 703 DECT iModyuli ye-Multi Button Wireless Audio Intercom System

Ukunyuswa kwe-Intercom

Nyusa i-intercom kumphakamo oyifunayo kubahambi ngeenyawo okanye abasebenzisi bemoto. I-angle yekhamera ibanzi kwii-degrees ezingama-90 ukugubungela uninzi lweemeko.
Ingcebiso: Musa ukugqobhoza imingxuma eludongeni nge-intercom ikwindawo yayo, kungenjalo uthuli lunokujikeleza ifestile yekhamera kwaye lonakalise ikhamera. view.

Ukubeka uMthumeli

Ingcebiso: Isidluliseli kufuneka sixhonywe phezulu kangangoko kunokwenzeka kwintsika yesango okanye eludongeni ukuze kwandiswe uluhlu. Ukunyuka kufutshane nomhlaba kuya kunciphisa uluhlu kwaye kunokwenzeka ukuba kuthintelwe ngakumbi yingca ende emanzi, amatyholo ajingayo kunye nezithuthi.
IINDAWO EZIPHATHELENE NOMbane MAZISEBENZISE UKHUSELEKO LWE-SURGE UKUBONELELA AMANDLA!

UPHANDO LWESIZA
IMALI YOKUBUYISWA EMVA KOFAKILE NGENXA YEMIBA YESIZA. NCEDA UBONELE I-T&C EGCWELE KWETHU WEBISAYITI.

• Nceda ufunde yonke le ncwadana phambi kokufaka le mveliso. Incwadana egcweleyo epheleleyo iyafumaneka yethu webindawo yolwazi olongezelelweyo
• Misela ibhentshi kwindawo yokusebenzela PHAMBI kokuya kwindawo. Cwangcisa iyunithi kwinduduzo yebhentshi yakho yokusebenza kwaye ufowunele inkxaso yobugcisa ukuba unayo nayiphi na imibuzo.

ICEBISO: Kufuneka uvavanye ukuqinisekisa ukuba isistim iyakwazi ukusebenza kulo lonke uluhlu olufunekayo. Ukunika amandla inkqubo kwaye ubeke ii-handsets kwiindawo ezilindelekileyo malunga nepropati ukuqinisekisa ukuba inkqubo isebenza ngokupheleleyo kwaye ifanelekile kwisiza.

AMANDLA Cable

GCINA UNIKEZELO WAMANDLA NJENGOKO ngokunokwenzeka.

ICEBISO: Uninzi lweefowuni zobugcisa ezifunyenweyo zibangelwa ngabafaki abasebenzisa i-CAT5 okanye intambo ye-alam ukunika amandla iyunithi. AKUKHO kulinganiswa ukuthwala amandla awoneleyo! ( 1.2amp incopho)

Nceda usebenzise intambo ilandelayo:

• Ukuya kuthi ga kwi-2 yeemitha ( 6 iinyawo) – Sebenzisa ubuncinci be-0.5mm2 (igeyiji eyi-18)
• Ukuya kuthi ga kwi-4 yeemitha ( 12 iinyawo) – Sebenzisa ubuncinci be-0.75mm2 (igeyiji eyi-16)
• Ukuya kuthi ga kwi-8 yeemitha (24 iinyawo) -Sebenzisa ubuncinci be-1.0mm2 (14 / 16 gauge)

UKHUSELEKO LWE-INGRESS

• Sincoma ukutywina yonke imingxuma yokungena ukukhusela izinambuzane ezinokubangela imiba enobungozi bokunciphisa amacandelo.
• Ukugcina ireyithingi ye-IP55 nceda ulandele imiyalelo yokutywina ebandakanyiweyo. (ikwafumaneka kwi-intanethi)

UFUNA UNCEDO OLUNYE?
+44 (0)288 639 0693
SKINA LE KHOWUDI YE-QR UKUBA UZISIWE KWIPHEPHA LEZIBONELELO ZETHU. IIVIDIYO | IZIKHOKELO NJANI | IINCWADI | IZIKHOKELO ZOKUQALA NGOKUKHAWULEZA

Iziphatho eziphathwayo

Ingcebiso:

• Kuluhlu olude lofakelo, khangela i-handset kufuphi nomphambili wepropati, kufuphi nefestile ukuba kunokwenzeka. Iindonga zekhonkrithi zinganciphisa uluhlu oluvulekileyo lwe-450 yeemitha nge-30-50% ngodonga ngalunye.
• Ukufezekisa uluhlu olungcono, fumana i-handset kude kweminye imithombo yosasazo lukanomathotholo, kubandakanya nezinye iifowuni ezingenazintambo, iirutha ze-wifi, ii-wifi eziphindayo, kunye neelaptops okanye iiPC.

703 IHandsfree (eNtabeni yoDonga) Umamkeli

UHLELO OLUPHELELEYO

ICEBISO: Kuluhlu olude lofakelo, khangela i-handset ekufutshane ngaphambili kwipropati kunye kufuphi nefestile ukuba kunokwenzeka. Kwakhona qinisekisa ukuba i-eriyali ixhonyiwe ijongise kwi-handset. Iindonga zekhonkrithi zinganciphisa uluhlu oluqhelekileyo lomoya ovulekileyo ukuya kwi-450 yeemitha nge-30-50% ngodonga ngalunye.

IDAYAGRAM YOKUCINGA

Ubusazi?
Ngenkqubo yethu ye-audio ye-703 ye-DECT unokongeza ukuya kuthi ga kwi-4 ye-handsets ephathekayo okanye iinguqulelo ezixhonywe eludongeni. (ISIXHOBO ESI-1 IYA KUKHALA IQHUSHA NGALINYE)
USENENGXAKI?
Fumana zonke iinketho zethu inkxaso ezifana Web Ncokola, iiManuwali ezipheleleyo, umnxeba woNcedo lwabaThengi kunye nokunye kwethu webindawo: WWW.AESGLOBALONLINE.COM

AMANDLA Cable

ICEBISO: Uninzi lweefowuni zobugcisa ezifunyenweyo zibangelwa ngabafaki abasebenzisa i-CAT5 okanye intambo ye-alam ukunika amandla iyunithi. AKUKHO kulinganiswa ukuthwala amandla awoneleyo! ( 1.2amp incopho)

Nceda usebenzise intambo ilandelayo:

• Ukuya kuthi ga kwi-2 yeemitha ( 6 iinyawo) – Sebenzisa ubuncinci be-0.5mm2 (igeyiji eyi-18)
• Ukuya kuthi ga kwi-4 yeemitha ( 12 iinyawo) – Sebenzisa ubuncinci be-0.75mm2 (igeyiji eyi-16)
• Ukuya kuthi ga kwi-8 yeemitha (24 iinyawo) -Sebenzisa ubuncinci be-1.0mm2 (14 / 16 gauge)

UBUSAZI? 
Sikwanayo ne-GSM (inkqubo yehlabathi yeselula) i-intercom yeeflethi ezininzi ezikhoyo. 2-4 amaqhosha eephaneli ezikhoyo. Iqhosha ngalinye libiza iselula eyahlukileyo. Kulula ukuthetha neendwendwe kunye nokusebenza ngocango / amasango ngefowuni.UKUTSHXWA KWEMAZINTI EXAMPLE
Landela le ndlela xa usebenzisa isitshixo semagnethi. Ukuba i-relay kwi-Transmitter okanye i-AES Keypad ekhethiweyo iqhutywe iya kuphelelwa amandla okwethutyana kwaye ivumele umnyango / isango ukuba likhulule.
Ufakelo ngaphandle kwe-AES Keypad ekhethiweyo; qhagamshela i-POSITIVE ye-Magnetic Lock ye-PSU kwi-terminal ye-N/C kwi-Transmitter Relay.

ULWAZI NGE-DECT HANDSET YAKHO

I-handset kufuneka ihlawulwe ubuncinane iiyure ezisi-8 phambi kokusetyenziswa. Kuyacetyiswa ukuba uyinike ubuncinci imizuzu engama-60 yentlawulo phambi kokwenza uvavanyo loluhlu phakathi kwemodyuli yothumelo kunye ne-handset ngaphakathi.

Ukulungelelanisa ixesha le-Relay trigger

• Cofa kwaye ubambe iRELAY 2  iqhosha lemizuzwana emi-3, skrola kwimenyu ude ubone 'ti'.
• Cofa i iqhosha lokukhetha ixesha lokudlulisa. Cofa i isitshixo nangaliphi na ixesha ukuphelisa inkqubo.

Ukulungelelanisa ixesha kwi-handset yakho

• Cofa kwaye ubambe i  iqhosha lemizuzwana emi-3, emva koko sebenzisa phezulu kwaye amaqhosha ukukhetha iyure kwaye ucinezele iqhosha kwakhona ukujikeleza ukuya kwimizuzu. Nje ukuba ugqibile ukulungisa ixesha uze ucofe i iqhosha ukugcina. Cinezela isitshixo nangaliphi na ixesha ukuphelisa inkqubo.

Ivoyisimeyili Vula/Valiwe

• Ungavula umsebenzi we-voicemail wenkqubo On/Cima nangaliphi na ixesha. Ukuqala cofa kwaye ubambe iqhosha le-RELAY 2 imizuzwana emi-3 emva koko uskrole kwimenyu de ubone 'Re' kwaye ulungelelanise oku ku-ON okanye VALIWE uze ucinezeleukukhetha.

Ukumamela imeyl yelizwi, cofa. Ukuba kukho ukusetyenziswa okungaphezulu kwe-1 kwaye ukukhetha umyalezo ofunekayo kwaye ucinezele ukudlala. Cofa i-RELAY 1 kube kanye ukucima umyalezo okanye ucinezele kwaye uwubambe ukucima wonke.

AC/DC STRIKE LOCK WRING EXAMPLE

Landela le ndlela xa usebenzisa i-Strike Lock kunye nenkqubo. Ukuba isetyenzisiwe kuya kuthetha ukuba ukuba i-relay kwi-Transmitter okanye i-AES Keypad ekhethiweyo iqhutywe iyakuvumela okwethutyana ukuba umnyango / isango likhulule.
Ngaba ufuna umzobo wocingo wesiko kwindawo yakho? Nceda uthumele zonke izicelo ku diagrams@aesglobalonline.com kwaye siya kwenza konke okusemandleni ethu ukukubonelela ngomzobo wokongeza olungele izixhobo ozikhethileyo.
Sihlala sisebenzisa ingxelo yakho yabathengi ukuphucula zonke izikhokelo / imathiriyeli yokufunda yabafaki.
Ukuba unazo naziphi na iingcebiso malunga noku nceda uthumele naziphi na iingcebiso ku feedback@aesglobalonline.com

UKUKHOWUDA KWAKHONA/KONGEZA IIMPAWU EZONGEZIWEYO

Ngamanye amaxesha isistim inokufuna ukuphinda ikhowudi yakube ifakiwe. Ukuba i-handset ayikhali xa iqhosha lokufowuna licofa, isistim inokufuna ukukhowudwa kwakhona.

• Inyathelo loku-1) Cinezela kwaye ubambe IQHUBA LEKHOWUDI ngaphakathi kweModyuli yoThutho kwimizuzwana emi-5 de ithowuni evakalayo iviwe kwisithethi se-Intercom.
  (Kwi-703 Transmitter i-LED eluhlaza ephawulwe ngu-D17 nayo kufuneka idaneke.)
• Inyathelo 2) Emva koko cinezela IKHOWUDI IQHUBA amaxesha ali-14 kwaye ulinde de kuvakala ingoma okanye i-LED icime. Ukwenza eli nyathelo kuyakususa ZONKE ii-handsets ezingqanyaniswayo ngoku (okanye zingqanyaniswe ngokuyinxenye) kwinkqubo.
  ( Qaphela: Ukwenza eli nyathelo kuya kucima ZONKE ii-voicemails emva kokusetha ngokutsha. )
• Inyathelo lesi-3) Cinezela kwaye ubambe IQHUBA LEKHOWUDI ngaphakathi kweModyuli yokuThutha imizuzwana emi-5 de i-LED yokubhangqa eluhlaza ephawulwe njenge-D17 iqala ukudanyaza.
  ( Ithowuni evakalayo iya kuviwa kwiSithethi se-Intercom. )
• Inyathelo 4) Emva koko cofa kwaye ubambe IQHUBA LEKHOWUDI kwi-handset de i-LED ebomvu phezulu iqalise ukudanyaza. Emva kwemizuzwana embalwa uya kuva umculo womculo ukukwazisa ukuba uqhagamshelwe ngempumelelo.
  (Phinda amaNyathelo 3 & 4 kwi-handset nganye entsha.)
• Inyathelo 5) Okokugqibela kufuneka uvavanye ikhithi ukuqinisekisa ukuba yonke into isebenza njengoko kulindelekile ngokucofa iQhosha lokuFowuna kwiCallPoint ukuqinisekisa ukuba i-handset kunye/okanye iyunithi exhonywe eludongeni ifumana umnxeba kwaye indlela ezimbini zokuthetha zisebenza ngokuchanekileyo.

I-AES KPX1200 IMISEBENZI EYINGQIQO

• I-LED 1 = RED / LUHLAZA. Ikhanyisa ngeRED ngelixa enye yeziphumo ivaliwe. Iyadanya ngexesha lokunqanda kunqunyanyiswe. Ikwayi-Wiegand ye-LED yesalathiso sempendulo kwaye iya kukhanya ngoLULUHLAZA.
• I-LED 2 = I-AMBER. Iyadanyaza kwi-Standby. Ibonisa ubume benkqubo kungqamaniso neebeps.
• I-LED 3 = RED / LUHLAZA. Ikhanyisa KULUHLAZA ukwenzela UKUPHUMA 1 kusebenze; kunye neRED ye-OUTPUT 2 isebenze.

{A} IJUMPER EBACK-LIT = EPHELELE/EZENZAKALELAYO.

• IGCWELE – Iphedi yamaqhosha inika ukhanyiso olumfiliba kwindawo yokulinda. Ijikela kwisikhanyiso esipheleleyo xa iqhosha licinezelwe, emva koko ukubuyisela ukukhanya kwakhona kwimizuzwana eyi-10 emva kokuba iqhosha lokugqibela licinezelwe.
• I-AUTO-I-backlit OFF kwi-standby. Ijikela kwi-FULL backlit xa iqhosha licinezelwe, emva koko ubuyele kwi-OFF 10 imizuzwana emva kokuba iqhosha lokugqibela licinezelwe.

{B} UKUSETYENZISWA KWE-ALARM OUTPUT = ( IZIXHOBO IPHEPHA – IINKETHO ZOKWENZA AMACINGA ABANGAPHAMBILI)
{9,15} I-Egress ye-PTE (Tyhila ukuPhuma)
Ukuba unqwenela ukusebenzisa oluphawu kufuneka ufake ucingo kwi PTE yakho usebenzisa iitheminali 9 & 15 eziphawulwe njenge ' EG IN ' kunye ' (-) GND.
Phawula: Uphawu lwe-egress kwiphedi yesitshixo yenzelwe ukuvula iSiphumo soku-1 kuphela. Qinisekisa ukuba ungeno onqwenela ukufumana ufikelelo kulo ngokutshintsha i-PTE luqhagamshelwe kwesi siphumo. Iyalungiselelwa ngoko nangoko, ukuLibazisa ngeSilumkiso kunye/okanye iAlarm yomzuzwana okanye ukubamba uQhagamshelwano lokuPhuma kwaLibaziseko.

I-AES KPX1200 ULWAZI NGEZIPHUMO ZOKUNIKEZELWA

• {3,4,5} RELAY 1 = 5A/24VDC Max. NC & NO abafowunelwa owomileyo.
  1,000 (iiKhowudi) + 50 Iikhowudi zeDuress
• {6,7,C} UDLALO 2 = 1A/24VDC Ubukhulu. NC & NO abafowunelwa owomileyo.
  100 (IiKhowudi) + 10 IiKhowudi zeDuress (Izibuko EZIQHELEKILEYO zimiselwa yiShunt Jumper ephawulwe njengo-C kumzobo. Qhagamshela isixhobo sakho kwi-NC kunye no-HAYI uze uhambise umtsi kwindawo efunekayo kunye novavanyo.)
• {10,11,12} RELAY 3 = 1A/24VDC Max. NC & NO abafowunelwa owomileyo.
  100 (iiKhowudi) + 10 Iikhowudi zeDuress
• {19,20} Tamper Tshintsha = 50mA/24VDC Max. NC umfowunelwa owomileyo.
• {1,2} 24v 2Amp = I-PSU elawulwayo
  (Ifakwe iintambo zangaphambili ngaphakathi kweNkqubo ye-Intercom ye-AES)

IDIYAGRAM ZOKUNXA NGENXA YOKUXEZA ZIFUMANEKA KWIPHEPHA LETHU LESIVIMBA.

UPHANDO LWESIZA

ICEBISO: Ukuba ufaka eli qhosha leqhosha njengenkqubo ezimeleyo akukho saveyi yesiza efunekayo. Ukuba iphedi yamaqhosha ibandakanyiwe ngaphakathi kwendawo yokufowunela ngoko nceda ulandele iinkcukacha zesaveyi yesayithi ebandakanyiweyo kwisikhokelo semveliso esingundoqo.

AMANDLA Cable

ICEBISO: Uninzi lweefowuni zobugcisa ezifunyenweyo zibangelwa ngabafaki abasebenzisa i-CAT5 okanye intambo ye-alam ukunika amandla iyunithi. AKUKHO kulinganiswa ukuthwala amandla awoneleyo! ( 1.2amp incopho)

Nceda usebenzise intambo ilandelayo:

• Ukuya kuthi ga kwi-2 yeemitha ( 6 iinyawo) – Sebenzisa ubuncinci be-0.5mm2 (igeyiji eyi-18)
• Ukuya kuthi ga kwi-4 yeemitha ( 12 iinyawo) – Sebenzisa ubuncinci be-0.75mm2 (igeyiji eyi-16)
• Ukuya kuthi ga kwi-8 yeemitha (24 iinyawo) -Sebenzisa ubuncinci be-1.0mm2 (14 / 16 gauge)

INDLELA YOKUFAKA ISHIXEKO

INDLELA YOKUFAKA IZIXHOKO ZEMAZINTSHI

INKQUBO YENKQUBO

Phawula: Inkqubo inokuqalisa kuphela imizuzwana engama-60 emva kokunika amandla isixhobo. *Ngaphandle kokuba ikhutshiwe *

1. Ngenisa imo yenkqubo:
2. Ukongeza kunye nokucima ikhowudi yokungena yephedi yamaqhosha entsha:
3. Cima ZONKE iikhowudi kunye namakhadi agcinwe kwiqela le-relay:
4. Guqula amaxesha emveliso yokuhanjiswa kunye neendlela:
5. Ukongeza ikhowudi yomsebenzisi SUPER: (1 MAX)
6. Guqula ikhowudi yenkqubo:(UKUZIKHETHELA INKQUBO YEPROX IMIZEKELO KUPHELA)
7. Ukongeza ikhadi elitsha lePROX okanye tag:
8. Ukucima ikhadi elitsha lePROX okanye tag:

IKHOWUDI YENKQUBO AYISEBENZI?

Phawula: Kwimeko apho ikhowudi yeprogram ilityalwe okanye yatshintshwa ngengozi, i-DAP Ukuseta kwakhona i-keypad inokwenziwa ngexesha le-60 yesibini isigaba sokuqala. Ukucofa i-PTE ngeli xesha okanye ukuphindaphinda oku ngokunciphisa iitheminali 9 & 15 kunye nekhonkco lokuxhuma iqhosha leqhosha liya kukhupha ii-beep ezi-2 ezimfutshane ukuba eli nyathelo lenziwe ngempumelelo. Emva koko faka iKhowudi yeDAP (iKhowudi yeNkqubo yokuFikelela ngokuthe ngqo) (8080**) kumphambili wephedi njengomva kwimowudi yenkqubo eya kukuvumela ukuba usete ngoku ikhowudi yokucwangcisa entsha, ngokweNyathelo lesi-6 ngasentla.

Uqwalaselo lokuLatshwa ngeseti yesandla (imifuziselo yephedi yezitshixo kuphela)

I-Relay 1 kwi-Keypad kuya kufuneka itshintshelwe kwi-Latching Relay jonga iSikhokelo sokuLungiselela i-Keypad ngeminye imiyalelo:
Ukuba usajonge iphedi yezitshixo ukuqalisa amasango kuya kufuneka usebenzise i-relay 2 okanye 3 kunye neprogram ngokufanelekileyo.
I-1 kwi-transmitter isaza kubangela ukuba amasango kodwa i-2 idlulisele iya kubamba amasango ukusuka kumthumeli.

Iseti yesandla yomsindo ephathwayo

Fowunela Enye Iseti yesandla
Cinezela kwaye iyunithi iya kubonisa 'HS1', 'HS2', 'HS3', 'HS4' kuxhomekeke ekubeni zingaphi ii-handsets ezikhowudiweyo kwisistim.
Emva koko sebenzisa i  kwaye ungakhetha i-handset onqwenela ukuyifowunela uze ucofe ukuqala umnxeba.

Guqula iVolume yeRingi
Cinezela kwaye ukwandisa okanye ukunciphisa ivolyum yeringi uze ucinezele ukugcuna.

Ivoyisimeyili
Xa umnxeba ungaphendulwa kwimizuzwana engama-40, undwendwe lunokushiya umyalezo. Nje ukuba igqityiwe, ifowuni iya kubonisa ifayile uphawu. Iyunithi inokugcina ukuya kwimiyalezo yelizwi eli-16.

Guqula iTowuni yeRingi 
Cinezela kwaye ifowuni iyakukhala ngethoni yayo ekhethiweyo ngoku. Emva koko unokucofa i kwaye izitshixo zokujikeleza kwiithowuni zeringi ezikhoyo. Emva koko cinezela ukukhetha nokugcina ithowuni
Ukumamela imeyl yelizwi, cofa Ukuba kukho ukusetyenziswa okungaphezulu kwe-1 kwaye ukukhetha umyalezo ofunekayo kwaye ucinezele ukudlala. Cinezela kube kanye Cima umyalezo okanye ucinezele kwaye ubambe ukucima konke.

UKUKHOWUDA KWAKHONA/KONGEZA IIMPAWU EZONGEZIWEYO

Ngamanye amaxesha isistim inokufuna ukuphinda ikhowudi yakube ifakiwe. Ukuba i-handset ayikhali xa iqhosha lokufowuna licofa, isistim inokufuna ukukhowudwa kwakhona.

• Inyathelo loku-1) Cinezela kwaye ubambe IQHUBA LEKHOWUDI ngaphakathi kweModyuli yoThutho kwimizuzwana emi-5 de ithowuni evakalayo iviwe kwisithethi se-Intercom.
  (Kwi-603 Transmitter i-LED eluhlaza ephawulwe ngu-D17 nayo kufuneka idaneke.)
• Inyathelo 2) Emva koko cinezela IKHOWUDI IQHUBA amaxesha ali-14 kwaye ulinde de kuvakala ingoma okanye i-LED icime. Ukwenza eli nyathelo kuyakususa ZONKE ii-handsets ezingqanyaniswayo ngoku (okanye zingqanyaniswe ngokuyinxenye) kwinkqubo.
  ( Qaphela: Ukwenza eli nyathelo kuya kucima ZONKE ii-voicemails emva kokusetha ngokutsha. )
• Inyathelo loku-3) Cinezela kwaye ubambe IQHUBA LEKHOWUDI ngaphakathi kweModyuli yoThutho kwimizuzwana emi-5 de ithowuni evakalayo iviwe kwisithethi se-Intercom.
  (Kwi-603 Transmitter i-LED eluhlaza ephawulwe ngu-D17 nayo kufuneka idaneke.)
• Inyathelo 4) Emva koko cofa kwaye ubambe IQHUBA LEKHOWUDI kwi-handset de i-LED ebomvu phezulu iqalise ukudanyaza, emva kwemizuzwana embalwa uya kuva umculo womculo ukukwazisa ukuba uqhagamshelwe ngempumelelo.
  (Phinda amaNyathelo 3 & 4 kwi-handset nganye entsha.)
• Inyathelo 5) Okokugqibela kufuneka uvavanye ikhithi ukuqinisekisa ukuba yonke into isebenza njengoko kulindelekile ngokucofa iQhosha lokuFowuna kwiCallPoint ukuqinisekisa ukuba i-handset kunye/okanye iyunithi exhonywe eludongeni ifumana umnxeba kwaye indlela ezimbini zokuthetha zisebenza ngokuchanekileyo.

IIKHODI ZE-KEYPAD

KEYPAD CODE ULUHLU TEMPLETE

ULUHLU lwe-ID ye-PROX TEMPLETE

SEBENZISA LE TEMPLATE YOKUGCINA INDLELA YOKUGCINA ZONKE IIKHOWUDI ZESIQINISEKISO EZIGCINWEYO NGAPHAKATHI KWE-keyPAD. LANDELA IFOMETHI KWI-EXAMPI-LES SET KWAYE UKUBA IITEmpleyithi EZINGAKUMBI ZIYAFUNEKA ZINOKUFUMANEKA KWETHU. WEBISIZA OKANYE ULANDE IKHOWUDI YEQR ENINIKIWEYO.

UKULUNGISA INGXAKI

Q. Iyunithi ayizukukhala i-handset.
A. Zama ukuphinda ukhowude i-handset kunye ne-transmitter ngokwemiyalelo.

• Jonga iqhosha lokutyhala intambo kwi-transmitter enemitha emininzi.
• Jonga umgama wentambo yamandla ukusuka kwiadaptha yamandla ukuya kwi-transmitter ingaphantsi kweemitha ezi-4.

Q. Umntu okwi-handset unokuva uphazamiseko kwifowuni.
A. Jonga umgama wentambo phakathi kweyunithi yentetho kunye nesidluliseli. Yenza mfutshane oku ukuba kunokwenzeka.

• Intambo yokutshekisha esetyenziswe phakathi kweyunithi yentetho kunye ne-transmitter ihlolwe i-CAT5.
• Khangela ukuba isikrini se-CAT5 siqhagamshelwe emhlabeni kwi-transmitter ngokwemiyalelo yocingo.

Q. Ikhowudi yekhiphedi ayisebenzisi isango okanye ucango
A. Khangela ukuba ukukhanya kwesalathisi esihambelanayo kuyakhanya. Ukuba iyenzeka, ke impazamo inokuba yingxaki yamandla ngokubaleka okugqithisileyo kwentambo, okanye iingcingo. Ukuba i-relay inokuvakala ngokucofa, ngoko ke yingxaki yocingo. Ukuba unqakrazo alunakuviwa, ngoko kusenokwenzeka ukuba yingxaki yamandla. Ukuba isibane asivuli kwaye iphedi yamaqhosha ikhupha ithowuni yempazamo, ngoko ke umba unokuba yimpazamo yokucwangcisa.

Q. Ifowuni yam ayizukuphinda ikhowudi
Zama inkqubo kwakhona. Ukuba ayikasebenzi, cima ikhowudi kwi-transmitter. Ukucima ikhowudi, cofa iqhosha lekhowudi imizuzwana emi-3 kwaye ukhulule. Yicinezele amaxesha angama-7 emva koko ithoni kufuneka iviwe. Emva koko cinezela amanye amaxesha angama-7. Ngoku zama ukuphinda ukhowude i-handset kwakhona ngokwenkqubo.

Q. Uluhlu lwengxaki - I-handset isebenza ecaleni kwe-intercom, kodwa hayi ngaphakathi kwesakhiwo
A. Khangela ukuba intambo yamandla kwi-transmitter ingaphakathi kwezikhokelo kwaye inzima ngokwaneleyo igeyiji. Ukungonelanga kweentambo zombane kuya kunciphisa amandla othumelo! Khangela ukuba akukho zinto zigqithileyo zithintele umqondiso, njengamatyholo amakhulu ashinyeneyo, izithuthi, ifoil enelinen ukugquma eludongeni njl.njl. Zama ukufumana umgca wokubona phakathi kwezixhobo zombini.

Q. Akukho ntetho nakweliphi na icala
A. Jonga i-CAT5 iingcingo phakathi kwephaneli yentetho kunye nesidluliseli. Nqamula, qhawula kwakhona iintambo kwaye uqhagamshele kwakhona.

Q. Isixhobo esiphathwayo asiyi kuhlawuliswa
A. Zama ukutshintsha zombini iibhetri ngeNi-Mh elinganayo kuqala. Kuyenzeka ukuba ube neseli efileyo ebhetrini enokuthintela zombini iibhetri ukuba zingatshaji. Khangela ungcoliseko okanye igrisi kwizikhonkwane zokutshaja kwisiseko sesandla (krwempa ngobunono nge screwdriver okanye iwulu yocingo).
Le mveliso ayiyomveliso epheleleyo de ifakwe ngokupheleleyo. Ngoko ke ithathwa njengenxalenye yenkqubo iyonke. Umfaki unoxanduva lokujonga ukuba ukufakela kokuphela kuhambelana neemfuno zolawulo lwasekhaya. Esi sixhobo senza inxalenye "yofakelo olusisigxina".
Phawula: Umenzi akanako ukunika ngokusemthethweni inkxaso yobugcisa kwisango elingenaziqinisekiso okanye abafakeli beminyango. Abasebenzisi bokugqibela kufuneka baqeshe iinkonzo zenkampani yokufakela yobuchwephesha ukuba ikhomishini okanye ukuxhasa le mveliso!

UKULONDOLOZWA KWE-INTERCOM

Ukungena kwebug ngumba oxhaphakileyo kukusilela kweyunithi. Qinisekisa ukuba onke amacandelo atywinwe ngokufanelekileyo kwaye ujonge ngamanye amaxesha. (Musa ukuvula indawo yolawulo emvuleni / ekhephuni ngaphandle kokuba uxhotyiswe ngokuchanekileyo ukugcina angaphakathi omile. Qinisekisa ukuba iyunithi ivaliwe ngokukhuselekileyo emva kokulungiswa)
Qinisekisa ukuba ibhokisi yothumelo (603/703) okanye i-eriyali (705) ayivalelwa yimithi, amatyholo okanye eminye imiqobo ngexesha elongezelelekileyo njengoko oku kunokuphazamisa umqondiso kwiiseti zezandla.
Ukuba une-AB, AS, ABK, ASK callpoint iya kuba nemiphetho yesilivere eyi-marine grade stainless steel ngoko ke kwiimeko zemozulu yesiqhelo akufuneki iruse nangona kunjalo inokuba buthuntu okanye ingabi mbala ekuhambeni kwexesha. Oku kunokugudiswa ngesicoci sentsimbi esingenasici esifanelekileyo kunye nelaphu.

IINKCUKACHA ZOKUSINGQONGILEYO

Isixhobo osithengileyo sifune ukutsalwa kunye nokusetyenziswa kobutyebi bendalo kwimveliso yaso. Isenokuba nezinto eziyingozi kwimpilo kunye nokusingqongileyo. Ukuze uthintele ukusasazwa kwezo zinto kwindawo yethu kunye nokunciphisa uxinzelelo kwimithombo yendalo, sikukhuthaza ukuba usebenzise iinkqubo ezifanelekileyo zokuthatha umva. Ezo sistim ziya kuphinda zisebenzise okanye zisebenzise kwakhona uninzi lwemathiriyeli yezixhobo zakho zobomi bokuphela. Isimboli enqamlezileyo ephawulwe kwisixhobo sakho iyakumema ukuba usebenzise ezo nkqubo. Ukuba ufuna ulwazi oluthe kratya ngoqokelelo, ukusetyenziswa kwakhona kunye neenkqubo zokurisayikilisha, nceda uqhagamshelane nolawulo lwenkunkuma lwengingqi okanye lwengingqi. Ungaqhagamshelana ne-AES Global Ltd ngolwazi oluthe kratya malunga nokusebenza kokusingqongileyo kweemveliso zethu.

Isibhengezo se-EU-RED sokuThobela
Umenzi: Advanced Electronic Solutions Global Ltd
Idilesi: Unit 4C, Kilcronagh Business Park, Cookstown, Co Tyrone, BT809HJ, United Kingdom
Thina / ndiyabhengeza, ukuba ezi zixhobo zilandelayo (DECT intercom), inxalenye amanani: 603-EH, 603-TX
Iimodeli ezininzi: 603-AB, 603-ABK, 603-AB-AU, 603-ABK-AU, 603-ABP, 603-AS,
603-AS-AU, 603-ASK, 603-ASK-AU, 603-BE, 603-BE-AU, 603-BEK, 603-BEK-AU,
603-EDF, 603-EDG, 603-HB, 603-NB-AU, 603-HBK, 603-HBK-AU, 603-HS, 603-HSAU,
603-HSK, 603-HSK-AU, 603-IB, 603-IBK, 603-iBK-AU, 603-IBK-BFT-US, 603-
IB-BFT-US, 703-HS2, 703-HS2-AU, 703-HS3, 703-HS3-AU, 703-HS4, 703-HS4-AU,
703-HSK2, 703-HSK2-AU, 703-HSK3, 703-HSK3-AU, 703-HSK4, 703-HSK4-AU

Ithobelana nezi mfuno zibalulekileyo zilandelayo:
I-ETSI EN 301 489-1 V2.2.0 (2017-03)
I-ETSI EN 301 489-6 V2.2.0 (2017-03)
I-ETSI EN 301 406 V2.2.2 (2016-09)
EN 62311:2008
EN 62479:2010
EN 60065
Izamkelo zaseOstreliya / eNew Zealand:
AZ/NZS CISPR 32 :2015
Esi sibhengezo sikhutshwe phantsi koxanduva lomenzi kuphela.
Isayinwe ngu: Paul Creighton, uMlawuli oLawulayo.Umhla: 4th Dec 2018

USENENGXAKI?
Fumana zonke iinketho zethu inkxaso ezifana Web Ncokola, iiManuwali ezipheleleyo, umnxeba woNcedo lwabaThengi kunye nokunye kwethu webindawo: WWW.AESGLOBALONLINE.COM

Amaxwebhu / Izibonelelo

I-AES GLOBAL 703 DECT iModyuli ye-Multi Button Wireless Audio Intercom System [pdf] Isikhokelo somsebenzisi I-703 DECT, i-Modular Multi Button Wireless Audio Intercom System, i-Wireless Audio Intercom System, i-Audio Intercom System, i-703 DECT, i-Intercom System

Iimbekiselo

• Incwadi yokusebenzisa