Buka ea Ts'ebetso
Khomphutha ea Drum
MFB-301 Pro
Kakaretso
MFB-301 Pro ke phetisetso e tsoetseng pele ea mofuta oa MFB-301, e atolositsoeng ke ho opa liatla ha MFB-401. Khomphutha ena ea moropa oa analog e khona ho hlophisoa ebile e ntle. Mefuta e ka hlophisoa mohato ka mohato le likarolo tsa eona tse tsamaellanang. Ntle le moo, yuniti e khona ho laoloa ka botlalo ke MIDI. Ho qoba ts'ebetso e fosahetseng, ka kopo latela mekhoa e hlalositsoeng ea bohlokoa ho etsa mesebetsi e itseng ka tatellano e nepahetseng.
Tlhophiso
Tšoaea sehokedi sa adaptara ea motlakase eo o e fuoang ka har'a socket e nyane ea USB ea yuniti. Ntle le moo, yuniti e ka fuoa matla ho tsoa komporong kapa bankeng ea motlakase e nang le bonyane 100 mA ea hajoale.
Kopanya MIDI ea ho kenya ka har'a keyboard kapa sequencer.
Yuniti e fana ka sephetho sa stereo hammoho le mohala oa hlooho.
Melumo
Ho na le lisebelisoa tse robeli tsa analog, tse ka fetoloang maemong a latelang
| BD | Bassdrum | Sebaka, ho bola, molumo, boemo |
| SD | Moropa oa leraba | Sebaka, ho senyeha, boemo ba lerata, boemo |
| CP | Opa liatla | Ho bola, Tlhaselo, Boemo |
| TT | Tom | Sebaka, ho bola, tlhaselo, boemo |
| BO | Bongo | Sebaka, ho bola, tlhaselo, boemo |
| CL | Li-claves | Sebaka, ho bola, tlhaselo, boemo |
| CY | Cymbal | Sebaka, Bola, Kopanya Lerata / Metal, Boemo |
| HH | Lumela | Sebaka, Bola, Kopanya Lerata / Metal, Boemo |
Sequencer
Sututsa Bapala ho qala le ho emisa sequencer. Sebelisa Boleng laola ho fetola sequencer tempo, hobane li-LED (Tune / Decay) tse kaholimo ha li hotetsoe. Ntle le moo, Boleng taolo e sebeletsa ho fetola boleng bakeng sa mekhahlelo ea molumo.
Ho kenya, ho boloka le ho hlakola mekhoa
MFB-301 Pro e fana ka libanka tse tharo tse nang le lipaterone tse 36 ka 'ngoe. Moetso o laeloa ka ho tobetsa Banka 1/2/3 (LED ka holimo hotetsa). Lokolla konopo ebe o tobetsa likonopo tse peli 1-6 ho khetha sebaka sa memori (11-66). Mekhoa ea ho boloka e latela leano le tšoanang: Mona, tobetsa ebe o ts'oara REC kamora ho tobetsa Bank pele.
Hona joale lokolla likonopo ka bobeli ebe u khetha sebaka sa memori ka ho kopanya 1- 6. Moetso o hlakoloa ka ho tobetsa ebe o ntša likonopo tsa REC le Play.
Tlhahiso: Ho khonahala feela ho kenya le ho boloka lipaterone ka li-LED ka bobeli kaholimo ho Boleng taolo e ile ea tima. Ntle le moo, lipaterone li ka bolokoa feela ha sequencer e emisoa.
Mekhoa ea Lenaneo Mohato oa Rekoto ea
Ka mokhoa ona, paterone e hlophisitsoe ka tatellano ho kena ho mehato e 16 ho sebelisa likonopo REC le Bapala.
- Tobetsa REC e lateloa ke konopo ea seletsa (mohlala BD).
- Hona joale lokolla likonopo ka bobeli (li-LED ka bobeli li hotetse)
- Sebelisa REC ho seta mehato (ho letsoa ka seletsa), ha Lisebelisoa tsa ho bapala phomolo
- Kamora ho beha mohato ho 16, phethela ts'ebetso ka ho tobetsa Bapala.
ExampLe:
Tobetsa REC hanngoe, ebe 7 x Bapala, ebe REC hang hape hape Bapala makhetlo a mang a 7.
Phello ke hore: o— —- o— —-
Tlhahiso: Ho khonahala feela ho kenya pina e felletseng. Ha u kenya lipehelo tse fosahetseng, u ka senya ts'ebetso ka ho tobetsa konopo ea seletsa. Qala bocha mananeo ho tloha qalong kamora moo. Ntle le moo, o kanna oa tobetsa REC bakeng sa nakoana ho
hlakola pina.
Ka ho sebelisa Boleng Ts'ebetso ea taolo, o ka potoloha ka mekhahlelo e latelang mme ka bomong o fetole litekanyetso tsa bona mohato ka mohato ka ho sebelisa taolo:
- Pitsi (Tune Leseli la lebone la LED)
- Bolelele (Ho bola Leseli la lebone la LED)
- Mosebetsi o eketsehileng (li-LED ka bobeli li hotetse)
Mesebetsi e meng ke:
- Tlhaselo ea BD, CP, TT, BO, le CL
- Lerata bakeng sa SD
- Lerata / Motsoako oa tšepe bakeng sa CY le HH.
Liphetoho tsa parameter li etsoa ka mokhoa oa Boleng taolo. Tsena li bonts'oa ke li-LED 1-6. Ka sena, o ka etsa li-toms tse phahameng le tse tlase kapa oa roala likatiba. Boleng bofe kapa bofe bo fetotsoeng bo sebetsa le mehatong e latellanang haeba ho se litekanyetso tse ncha tse kenang mona. Hopola sena ka likatiba tsa hi haholo-holo!
ExampLe:
- Tobetsa REC le HH, ebe u lokolla likonopo ka bobeli.
- Tlanya REC ho hlophisa hi-hat ea pele.
- Tobetsa konopo ea taolo ea boleng ho fihlela lebone le letona le bonesitsoe, ebe u phetla ho beha bolelele boo u bo batlang (mohlala, Open Hi-hat).
- Tsoela pele ka ho tobetsa ka ho tobetsa Bapala (Khefutsa) kapa REC ho eketsa katiba ea bobeli.
- Joale, bulela Boleng laola hape ho theha hi-hat e koetsoeng ka ho beha e khuts'oane boleng bakeng sa bolelele ba lintlha (mohlalaample).
- Kamora moo, hlophisa mokhoa o setseng.
- Qetella ts'ebetso ka ho tobetsa konopo ea seletsa.
Tlhahiso: O hloka feela ho fetola Boleng laola haeba o batla ho fetola boleng ba parameter mohato ona.
CL le BO li etselitsoe ka ho tobetsa pele REC e lateloa ke ho penya habeli
EA-XNUMX-CP / CL ka ho latellana TT / BO. E latelang, lokolla likonopo ka bobeli. Bakeng sa mohlalaample: (REC +
EA-XNUMX-CP / CL + EA-XNUMX-CP / CL).
Bolelele ba Mohlala
Haeba o batla paterone e nang le mehato e ka tlase ho 16, qetella mananeo ka nako efe kapa efe ka ho tobetsa konopo ea seletsa. Pina e hlophisitsoeng ea hoqetela e beha bolelele ba paterone.
ExampLe:
BD-track, tobetsa REC hang, 5 x Bapala, REC hang, 5 x Bapala, 'me qetellong BD ho phethela mananeo. Ka lebaka leo, u entse mananeo a 12, a lekana le bareng ea 3/4.
Mokhoa oa Nako ea 'Nete
Qala sequencer ebe o tobetsa REC (O tla utloa molumo oa sekhahla CL ka morethetho oa 4/4). Joale o ka seta mehato ka nako ea 'nete ka ho tobetsa likonopo tsa seletsa se tsamaellanang kapa ka ho sebelisa MIDI (bona lenane la ts'ebetsong la MIDI) Ka ho tobetsa le ho ts'oara konopo ea seletsa, pina e tla hlakoloa.
Sebelisa le Boleng laola ho fetola molumo, bolelele, kapa likeketso bakeng sa seletsa se neng se etselitsoe lenaneo la ho qetela.
Lenaneo la CL le BO hoa khoneha ka ho tobetsa REC habedi. Tlhalosong: 1 x REC = CP le TT, hang hape REC = CL le BO. Ho tobetsa REC hape e tla emisa ho rekota.
Boemo ba lisebelisoa bo ka fetoloa ka paterone. Tobetsa Bapala e lateloa ke ts'ebetso ea taolo ea boleng ho fihlela ka ho le letšehali LED e hotetsoe. Tobetsa konopo ea sesebelisoa hamorao, mohlala BD. Sebelisa taolo ea boleng ho fetola boemo ba BD pina. CL le BO e ka fetoloa ka bofubelu LED li hotetsoe. (Tobetsa boleng habeli). Boemo ba li-headphone bo ka beoa ka bobeli Li-LED ho bonesoa. Etsa bonnete ba hore o boloka mohlala ka kotloloho. Ntle le moo, li-setting li tla lahleha ha u tima yuniti.
Lisebelisoa tsa molumo
Ho a khonahala ho fetola sekhahla, bolelele ba noutu, le likarolo tse ling kapele. Ka tsela ena, o ka theha setlhopha sa kamehla se sebetsang, mohlala, ha o hlakola paterone. Ho etsa joalo, tobetsa konopo ea Boleng laola hang (LED letšehali hotetsa). E latelang, tobetsa REC le mohlala BD, ebe u lokolla likonopo ka bobeli. Kamora moo, Boleng taolo e ka sebelisoa ho lokisa sekontiri se metsi (Tune LED hotela), bolelele (Bolaea ba LED bo hotetse), le ts'ebetso e eketsehileng (li-LED ka bobeli li bonesitsoe) BD. Ho tsoa mokhoeng ona, tobetsa BD. Tsamaiso e ts'oanang e ka sebelisoa bakeng sa lisebelisoa tse ling. BO le CL e ka fetoloa ka ho tobetsa likonopo habeli (REC + EA-XNUMX-CP / CL + EA-XNUMX-CP / CL, ebe u lokolla likonopo ka bobeli).
Ho phaella moo, hoa khoneha ho fetola boemo ba lisebelisoa bakeng sa mohlala. Ha o hlakola paterone, boemo bona bo tla sebelisoa e le boemo ba kamehla. Ho etsa joalo, tobetsa konopo ea Value control hang (ka ho le letšehali ho LED). Tobetsa ho mohlample BD kamora moo mme o fetole boemo ba BD ka ho sebelisa taolo ea Boleng. Mokhoa o joalo o ka sebelisoa bakeng sa lisebelisoa tse ling. Maemo a BO le CL a ka fetoloa ka LED e nepahetseng ea Taolo ea Boleng e khantšitsoe.
Ho bapala liletsa ka kotloloho
E le hore u qale lisebelisoa ka bomong ka kotloloho ho yuniti, tobetsa konopo ea Boleng taolo (ho bonesitsoe ka lebone la LED - tobetsa habeli ho khetha CL le BO, ho hotetse LED hantle). Lisebelisoa li se li ka qalisoa li sebelisa likonopo tse tsamaellanang.
Lipina tsa Lenaneo
Ts'ebetso ena e lumella ho chata mekhoa e mengata. Mefuta e tlamiloeng e bapaloa ka tatellano ka tatellano e etselitsoeng pele. Mananeo a etsoa ka tsela e latelang. Hlokomela hore sequencer e tlameha ho emisoa:
Tobetsa ebe o lokolla Sefela (LED e hotetse), ebe o tobetsa ebe o lokolla REC (Leseli la lebone).
Lenaneo le qala ka ho khetha paterone ea pele.
ExampLe:
Tobetsa ebe o lokolla Banka1, khetha paterone ka ho tobetsa likonopo tse peli 1-6 le ho netefatsa ka ho tobetsa Bapala/Mohato. Hona joale u bolokile mokhoa oa pele. Moetso oa bobeli o entsoe ka tsela e latelang: Tobetsa Banka1, tobetsa likonopo tse peli 1-6, le ho netefatsa ka ho tobetsa Bapala/Mohato. Tsoela pele ho etsa mananeo ka tatellano ho fihlela mefuta eohle e bolokiloe. Ebe u netefatsa ts'ebetso eohle ka ho tobetsa REC.
Ho kenya le ho boloka lipina
Lipina li laoloa joalo ka lipaterone. Tobetsa Sefela le likonopo tse peli 1-6. Ho boloka a pina, tobetsa Pina, ebe REC. Lokolla likonopo ka bobeli ebe o tobetsa likonopo tse peli 1-6. Bakeng sa ho bapala pina, tobetsa Pina pele, e lateloe ke Bapala. Ka lehlakoreng le leng, ho tla bapaloa paterone ea ho qetela.
Hlakola
MFB-301 Pro e fana ka tse hlano shuffle/ matla. Ha sequencer e emisoa, tobetsa Hlakola e lateloang ke konopo 1-6. 1 ema ho se shuffling. Li-LED 1-6 bona ka mahlo mokhoa o khethiloeng. Peakanyo ena e sebetsa lefatšeng ka bophara.
Tlhahiso: Mesebetsi ea MIDI e ka fetoloa feela ha sequencer e emisoa.
Setsi sa MIDI
Sebelisa mosebetsi oa ho ithuta ho seta mocha oa MIDI. Ha sequencer e ntse e emisoa, tobetsa MIDI, e lateloe ke lengolo ho MIDI line. Hang ha LED e kaholimo ho MIDI konopo ea tima, ts'ebetso e phethetsoe.
Lebelo la MIDI
Ho nolofalletsa ho amoheloa ha data ea lebelo, tobetsa MIDI e lateloa ke konopo 1.
Velocity e nolofalitsoe ka LED 1 e bonesitsoe. Ha e sebetse ha LED 1 e tima.
MIDI CC
Yuniti e ka fumana litaelo tse fetang 20 tsa taolo ea MIDI (bona lenane la ho kenya tšebetsong MIDI). Tobetsa MIDI le konopo 2 ho nolofalletsa ho amohela
balaoli (LED 2 e bonesitsoe) kapa che (LED 2 ha e eo).
MIDI Clock / Khokahano ea kantle
Ka sequencer ea MFB-301 Pro e hlophiselitsoeng kahare (li-LED tse kaholimo ho likonopo 3 le 4 e tima), MIDI-clock e kenang kapa letšoao la sync la analoge le tla hlokomolohuoa. Ho kenya tshebetsong kamahanyo ya kantle, tobetsa MIDI le konopo 3 bakeng sa MIDI-clock kapa konopo 4 bakeng sa oache ea ka ntle ea analog (LED 3 ka tatellano 4 lit).
Jack ea kantle ea sync ke TRS-jack moo ntlha e amohelang letšoao la oache mme lesale le amohela litaelo tsa ho qala le ho emisa.
Liphetoho tsa molumo ka MIDI
Lintlha tse amohetsoeng tsa molaoli oa MIDI li tla fetola litlhophiso tsa molumo ka ho sa feleng.
Haeba u lakatsa ho khutlela boemong ba ho qetela bo bolokiloeng, tobetsa MIDI e lateloa ke 5.
Tlhahiso: Ha u sebelisa li-MIDI CC ho fetola maemo a molumo ka matla, ho kgothaletswa ho sebelisa lisebelisoa tsa meropa ho MIDI-notes 36 ho isa ho 47. Lintlha tse phahameng li se li ntse li sebelisa li-MIDI CC kahare. Bona tafole ea MIDI ts'ebetsong.
Boloka Litlhophiso tsa Motheo
Litlhophiso tsa Sound-, MIDI- le shuffle li ka bolokoa, tsa li etsa hore li fumanehe ha ho buloa yuniti hape. Ho etsa joalo, tobetsa MIDI, lokolla konopo ebe o tobetsa REC.
Ho kenya le ho boloka mekhoa u sebelisa USB, USB-Firmware-Update
Ka ha mokhanni o loketseng o kentsoe mme MFB-301 Pro e hokahantsoe le komporo ea Windows e sebelisa khokahano ea USB, software ea terminal e ka sebelisoa ho boloka le ho jarisa lipaterone ho tloha le ho yuniti. Ho etsa joalo, tobetsa Banka 1, lokolla konopo, ebe o tobetsa Bapala ho qala phetisetso ea komporo. Kapa, tobetsa Banka 1, lokolla konopo, tobetsa REC, lokolla konopo ebe o tobetsa Bapala ho qala phetisetso ho MFB-301 Pro. Litlhaloso tse qaqileng haholoanyane, hammoho le tlhaiso-leseling ea ho etsa liapdeite tsa firmware li tla fumaneha haufinyane ho rona websebaka.
Lintlha tsa Taolo
Phethahatso ea MIDI
| MIDI-Hlokomela | Sesebelisoa / Mosebetsi | CC-Nomoro | Mosebetsi |
| Tlhokomeliso # 36 (C) | BD | CC # 03 | Lipina tsa BD |
| Tlhokomeliso # 37 (C #) | HH | CC # 11 | SD Tune |
| Tlhokomeliso # 38 (D) | SD | CC # 19 | TT Tune |
| Tlhokomeliso # 39 (D #) | CY | CC # 21 | BO Tune |
| Tlhokomeliso # 40 (E) | CP | CC # 86 | CL Tune |
| CC # 84 | CY Tune | ||
| Tlhokomeliso # 41 (F) | konopo ea REC | CC # 89 | Pina ea HH |
| Tlhokomeliso # 42 (F #) | TT | ||
| Tlhokomeliso # 43 (G) | LED Tune ka / Off | CC # 64 | BD Ho bola |
| Tlhokomeliso # 44 (G #) | BO | CC # 67 | Ho senyeha ha SD |
| Tlhokomeliso # 45 (A) | LED ho bola On / Off | CC # 75 | Ho senyeha ha CP |
| Tlhokomeliso # 46 (A #) | CL | CC # 20 | Ho bola ha TT |
| Tlhokomeliso # 47 (B) | Konopo ea ho bapala | CC # 78 | BO Bola |
| CC # 87 | CL Ho senyeha | ||
| Tlhokomeliso # 48 (C) | BD + CC Tlhaselo e telele | CC # 85 | CY Ho bola |
| Tlhokomeliso # 49 (C #) | SD + CC e tlase | CC # 90 | HH Ho bola |
| Tlhokomeliso # 50 (D | BD + CC seaplane | ||
| Tlhokomeliso # 51 (D #) | SD + CC e phahameng | CC # 13 | SD Snappy |
| Tlhokomeliso # 52 (E) | CP + CC e telele | ||
| Tlhokomeliso # 53 (F) | CP + CC e khuts'oane | CC # 02 | Tlhaselo ea BD |
| Tlhokomeliso # 54 (F # | TT + CC e tlase | CC # 76 | Tlhaselo ea CP |
| Tlhokomeliso # 55 (G) | TT + CC Tlhaselo e tlase | CC # 79 | Tlhaselo ea TT |
| Tlhokomeliso # 56 (G #) | TT + CC seaplane | CC # 82 | BO Tlhaselo |
| Tlhokomeliso # 57 (A) | TT + CC Tlhaselo e mahareng | CC # 53 | CL Tlhaselo |
| Tlhokomeliso # 58 (A #) | TT + CC e phahameng | ||
| Tlhokomeliso # 59 (B) | Tlhaselo e phahameng ea TT + CC | CC # 88 | Motsoako oa CY |
| Tlhokomeliso # 60 (C) | BO + CC tlhaselo e tlase | CC # 93 | Motsoako oa HH |
| Tlhokomeliso # 61 (C #) | BO + CC seaplane | ||
| Tlhokomeliso # 62 (D) | BO + CC tlhaselo e mahareng | ||
| Tlhokomeliso # 63 (D #) | BO + CC e phahameng | ||
| Tlhokomeliso # 64 (E) | CL + CC e tlase | ||
| Tlhokomeliso # 65 (F) | CL + CC e phahameng | ||
| Tlhokomeliso # 66 (F #) | CY + CC Metal | ||
| Tlhokomeliso # 67 (G) | Motsoako o mokhutšoanyane oa HH + CC | ||
| Tlhokomeliso # 68 (G #) | CY + CC Motsoako | ||
| Tlhokomeliso # 69 (A) | HH + CC nako e telele Remix | ||
| Tlhokomeliso # 70 (A #) | CY + CC Lerata | ||
| Tlhokomeliso # 71 (B) | HH + CC Lerata le lekhuts'oane | ||
| Tlhokomeliso # 72 (C) | Lerata le lelelele la HH + CC |
Tlhahiso: Ts'ebetso ea MFB-301 Pro ea MIDI e tsamaellana le mefuta ea MFB Tanzmaus le MFB Tanzbär Lite. U ka sebelisa lisebelisoa tsa taolo ea likarolo ka bobeli ho laola MFB-301 Pro hole.
MFB-301-Pro USB-ya data-Ho fetiswa
MFB-301 Pro e ka hokahanngoa le komporo e sebelisang sistimi ea Windows ea haufinyane. Ka ha mokhanni o tsamaellanang o kentsoe, software ea sesebelisoa e ka sebelisoa ho jarisa le ho boloka lipaterone le ho kopa le ho nchafatsa firmware ea yuniti.
Ho kenya Mokhanni
MFB-301 Pro e sebelisa chip ea CY7C65213 ka Cypress ho fetolela USB ho data ea serial le ka tsela e fapaneng. Ho seta khokahanyo komporong ea hau, ho hloka hore ho kenngoe mokhanni. Mokhanni enoa a ka fumanoa ho Cypress websebaka: https://www.cypress.com/sdc
E-ea karolong ea USB 'me u batle ho kena
Khoasolla USB-Serial Driver - Windows
Tlhahiso: Pele o khona ho jarolla mokhanni, o tla hloka ho ingolisa le moetsi le ho netefatsa ts'ebetso ena ka lengolo-tsoibila.
- Kenya mokhanni ka ho tobetsa habeli .exe file.
- Ka mor'a moo, hokela komporo ea hau ho MFB-301 Pro ka ho sebelisa thapo e loketseng ea USB ebe u bulela likarolo tseo ka bobeli.
- U ka sebelisa thapo ea USB e tlang le phepelo ea motlakase ea MFB-310 Pro.
MFB-301 Pro ha e hloke phepelo ea motlakase e arohileng. - Ema ho fihlela Windows e amohela sesebelisoa mme e se bonts'a e ka sebelisoa.
Terminal Software
Ka nepo, software ea terminal e sebelisoa ho buisana lipakeng tsa komporo le MFB-301 Pro. Re khothaletsa software ea mahala ea HTerm.exe. HTML e ka fumanoa mona bakeng sa exampLe:
https://www.heise.de/download/product/hterm-53283
Ho hokela ho HTerm
- Qala HTerm.exe ka ho penya habeli.
- Kaholimo ho le lets'ehali la GUI ho tla bonts'a likoung tsa COM.
- Kopanya MFB-301 Pro khomphuteng ea hau ka USB. Nomoro ea COM e lokela ho hlaha kamora nakoana. Haeba ho se joalo, ho ka 'na ha hlokahala hore u tobetse konopo ea R hang ho GUI.
- Haufi le pontšo ea COM, ho bonts'oa linomoro tse 'maloa. Ha ho na tlhoko ea ho hlophisa efe kapa efe ea tsena. Litekanyetso ke BAUD 115200, DATA 8, STOP1, Parity None.
- Ka lehlakoreng le letšehali la GUI, tobetsa Hokela ho fihlela kenyelletso e bonahalla hakolla. Loketse!
Tlhahiso: Haeba ho se letho le etsahalang, mokhanni ha a kenngwa ka katleho.
Ho bontša Firmware-Version
Ho kopa mofuta oa firmware oa MFB-301 Pro ea hau, etsa bonnete ba hore HTerm e amohetse yuniti.
Ho MFB-301 Pro, tobetsa ebe o lokolla Hlakola, ebe o tobetsa Bapala.
Software joale e tla bonts'a mofuta oa firmware tlasa Re amohetse Datha, mohlala
Mofuta oa MFB-301 Pro Version 1.0
Tlhahiso: Haeba ho se joalo, ka kopo lekola habeli hore na khetho ea ASCI ho software e holofalitsoe (E hloka ho fuoa matla).
Ho fetisa lipaterone ho komporo
Ho fetisetsa paterone e le 'ngoe ho tloha MFB-301 Pro's RAM ea hau ho ea khomphuteng, etsa mehato e latelang:
- Etsa bonnete ba hore MFB-301 Pro e atlehile ho hokahanngoa le komporo ka USB 'me e ba fumane.
- Ntlha ea pele, hlakola Data e Amohetseng view ho HTerm ka ho tobetsa Ho hlakile ho amohetse.
- Joale kenya mochini ka har'a MFB-301 Pro's RAM, mohlala BANK 2, Pattern 11.
- Tobetsa Banka 1 ho Pro ea hau ea MFB-301.
- Lokolla konopo.
- Tobetsa Bapala.
- Lintlha tsa paterone lia fetisoa. The file boholo ke 256 Bytes.
- Ka ho tobetsa Boloka Phatlalatso ho HTerm, lintlha tsena li ka bolokoa kae kapa kae ka har'a komporo tlasa lebitso lefe kapa lefe, joalo ka PATT2_11.MFB.
Ho fetisetsa lipaterone ho MFB-301 Pro
Ho fetisetsa paterone e le 'ngoe ho RAM ea MFB-301 Pro, etsa mehato e latelang:
- Etsa bonnete ba hore MFB-301 Pro e atlehile ho hokahanngoa le komporo ka USB 'me e ba fumane.
- Ka nepo, hlakola paterone ea hajoale ka ho tobetsa Rec le Play ho MFB-301 Pro. Ka tsela ena, o tla tseba ho utloa phapang kamora phetiso.
- Tobetsa Send File ho HTerm.
- Fumana mohlala oo u o batlang file khomphuteng ya hao, mohlala, PATT2_11.MFB.
- Tlanya Open in HTerm.
- Press Bank 1 ho MFB-301 Pro.
- Lokolla konopo.
- Tlanya Rec.
- Lokolla konopo.
- Tlanya Papali.
- Hona joale u na le approx. Metsotsoana e 30 ho qala phetisetso ho HTerm ka ho tobetsa Start.
- Joale, boloka paterone ho MFB-301 Pro ea hau.
Tlhahiso: Ke data ea mofuta o le mong feela e fetisoang.
Ho etsa tlhahiso ea Firmware
MFB-301 Pro e fana ka ts'ebetso ea ntlafatso e hahelletsoeng kahare. Ho phethahatsa ntlafatso ea firmware, o tla hloka .bin e tsamaisanang le eona file, eo u tla e fuoa khafetsa ho tsoa ho MFB's websebaka kapa (ha ho hlokahala) ka tšehetso ea MFB.
- Etsa bonnete ba hore MFB-301 Pro e atlehile ho hokahanngoa le komporo ka USB 'me e ba fumane.
- Tobetsa ho Romela File ho HTerm.
- Fumana apdeite file khomphuteng ya hao, mohlala: MFB-301P_VerX_X.bin, ebe o tobetsa ho Bula.
- Tima Pro ea hau ea MFB-301.
- Tobetsa Rec le Bapala ho MFB-301 Pro ea hau ebe u bulela sesebelisoa hape.
- Lokolla likonopo ka bobeli.
- Lekola habeli hore na khokelo ea USB ho MFB-301 Pro ea hau e ntse e le teng ho tsona.
- Tobetsa Qala ho HTerm ho qala phetiso ea data.
- Tima MFB-301 Pro 'me u e khutlele kamora moo.
- U ka sheba habeli mofuta oa hajoale oa firmware nako efe kapa efe.
Bona Ho bontša Firmware-Version
Litokomane / Lisebelisoa
 |
MFB Drum Computer [pdf] Buka ea Taelo Khomphutha ea Drum, MFB-301 Pro |
