AVANTEK AS8 Active Line Array PA System Mushandisi Manual

©2023 Avante Audio kodzero dzese dzakachengetwa. Ruzivo, zvakatemwa, dhayagiramu, mifananidzo, uye mirairo
apa zvinogona kuchinjwa pasina chiziviso. Avante logo uye inozivisa zvigadzirwa mazita uye nhamba
apa pane zviratidzo zveAvante Audio. Kudzivirirwa kweCopyright kunonzi kunosanganisira ese mafomu uye nyaya dze
zvinhu zvine kodzero yekodzero uye ruzivo rwave kutenderwa nemutemo kana mutemo wekutonga kana wapihwa.

Mazita echigadzirwa anoshandiswa mugwaro iri anogona kunge ari matrademarks kana marejisheni akanyoreswa eavo
makambani uye anobvumwa. Ese asiri eAvante mabhureki nemazita echigadzirwa zviratidzo
kana zviratidzo zvakanyoreswa zvemakambani avo.

Avante Audio uye makambani ese ane hukama pano anoramba chero zvikwereti zvese zvepfuma, zvishandiso,
chivakwa, uye kukuvadzwa kwemagetsi, kukuvadzwa kune chero vanhu, uye zvakananga kana zvisina kunanga kurasikirwa kwehupfumi kwakabatana
nekushandiswa kana kuvimba nechero ruzivo rwuri mukati megwaro iri, uye/kana semhedzisiro ye
zvisina kufanira, zvisina kuchengetedzeka, zvisina kukwana uye zvisina hanya kusangana, kuisirwa, rigging, uye kushanda kwechigadzirwa ichi.

AVANTE World Headquarters USA
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
323-316-9722 | Fax: 323-582-2941 | www.avanteaudio.com | info@avanteaudio.com

AVANTE NETERLANDS
Junostraat 2 | 6468 EW Kerkrade | Netherlands +31 45 546 85 00 | Fax: +31 45 546 85 99 | europe@avanteaudio.com

AVANTE MEXICO
Santa Ana 30 | Parque Industrial Lerma | Lerma Mexico 52000 +52 (728) 282.7070 | ventas@avanteaudio.com

Europe Energy Saving Notice
Energy Saving Matters (EuP 2009/125/EC) Kuchengetedza simba remagetsi chinhu chikuru chekubatsira kuchengetedza zvakatipoteredza. Ndapota dzima zvigadzirwa zvemagetsi
kana dzisiri kushandiswa. Kuti udzivise mashandisirwo emagetsi mukuita zvisina basa, bvisa zvese zvemagetsi kubva pamagetsi kana zvisiri kushandiswa. Ndatenda!

Document Version: Shanduro yakagadziridzwa yegwaro iri inogona kuwanikwa online. Ndokumbira utarise online pa www.avante.com kuitira kudzokororwa/kuvandudzwa kwegwaro iri risati ratanga kuiswa
uye kushandisa.

Izwi reBluetooth® chiratidzo nemalogo zviratidzo zvekutengesa zvakanyoreswa zveBluetooth SIG, Inc. uye chero kushandiswa kwemamaki akadaro neAvante Audio kuri pasi perezinesi. Zvimwe zviratidzo uye mazita ekutengeserana ndeaya evaridzi vawo.

Date	Document Version	Notes
02/28/201	1.0	Kusunungurwa kwekutanga
03/13/2019	2.1	Yakagadziridzwa yemanyorero fomati
03/14/2019	2.2	Yakagadziriswa typos
03/22/2019	2.3	Yakagadziridzwa ruzivo rwefekitari
09/19/2023	3 2	Updated Connections & Contr

FCC STATEMENT

Ichi chishandiso chinoenderana neChikamu 15 cheFCC Mitemo. Kushanda kunoenderana nemamiriro maviri anotevera: (1) mudziyo uyu haugone kukonzera kukanganisa kunokuvadza, uye (2) mudziyo uyu unofanirwa kugamuchira chero kukanganisa kunowanikwa, kusanganisira kukanganisa kunogona kukonzera kushanda kusingade.

FCC RADIO FREQUENCY INTERFERENCE WARNING & MIrairo

Ichi chigadzirwa chakaedzwa uye chakaonekwa kuti chinoenderana nemiganhu sechikamu 15 cheFCC Mitemo.

Iyi miganho yakagadzirirwa kupa dziviriro inonzwisisika kubva mukukanganisa kunokuvadza mukuisa kwekugara. Mudziyo uyu unoshandisa uye unogona kuvheneka simba reredhiyo uye, kana usina kuiswa uye kushandiswa zvinoenderana nemirairo inosanganisirwa, inogona kukonzera kukanganisa kufambiswa kweredhiyo.

Nekudaro, hapana vimbiso yekuti kukanganisa hakuzoitika mune imwe yekumisikidza. Kana mudziyo uyu ukakonzera kukanganisa kunokuvadza paredhiyo kana kutambira terevhizheni, izvo zvinogona kutariswa nekudzima nekubatidza mudziyo, mushandisi anokurudzirwa kuedza kugadzirisa kukanganiswa neimwe kana dzakawanda dzedzinotevera nzira:

• Rongedza zvakare kana kutamisa mudziyo.
• Wedzera kupatsanurwa pakati pemudziyo nemugamuchiri.
• Batanidza mudziyo neredhiyo inogashira pamagetsi pamaseketi emagetsi akasiyana.
• Bvunza mutengesi kana nyanzvi yeredhiyo/TV ine ruzivo kuti ubatsirwe.

GENERAL FORMATION

NHUNGAMIDZO

Mutauri uyu wakagadzirirwa kushandiswa nehunyanzvi chete. Ndokumbira uverenge uye unzwisise mirairo yese uye
nhungamiro mubhuku rino zvakanyatsonaka uye zvakakwana usati waedza kushandisa vatauri ava. Iyi mirairo ine ruzivo rwakakosha maererano nekuchengetedza, kuisa, uye kushandiswa.

KUBVANDUTSA

Mutauri wega wega akaedzwa zvakakwana uye akatumirwa mune yakakwana yekushandisa mamiriro.
Nyatsotarisa bhokisi rekutumira kune kukanganisa kungangodaro kwakaitika panguva yekutumira. Kana katoni ichiita seyakanganisika, nyatsoongorora sipika kana kukuvadzwa uye iva nechokwadi chokuti zvinhu zvose zvinodiwa kuti uise uye ushandise mukurukuri zvasvika zvakanaka. Kana kukuvara kwawanikwa kana kuti zvikamu zvisipo, ndapota taura neboka redu rekutsigira vatengi kuti uwane mamwe mirairo. Ndapota usadzorera mutauri uyu kumutengesi wako usina kutanga wabata rubatsiro rwevatengi panhamba yakanyorwa pazasi. Ndapota usarasa katoni yekutumira mumarara. Ndapota shandisazve pese pazvinogoneka.

RUTSIGIRO rwevatengi
AVANTE inopa mutsara wekutsigira mutengi kuti upe rubatsiro rwekuseta, kubatsira chero mibvunzo kana
matambudziko anogona kumuka panguva yekuseta kana yekutanga kuisirwa, uye kune chero masevhisi ane chekuita nenyaya. Iwe
anogonawo kutishanyira pa web pa www.avanteaudio.com kune chero mhinduro kana mazano.
AVANTE SERVICE USA - Muvhuro - Chishanu 8:00am kusvika 4:30pm PST
Izwi: 800-322-6337 Fax: 323-532-2941
support@avanteaudio.com
AVANTE SERVICE EUROPE - Muvhuro - Chishanu 08:30 kusvika 17:00 CET
Izwi: +31 45 546 85 30 Fax: +31 45 546 85 96
europe@avanteaudio.com

Kunyoresa garandi

Ndokumbira unyore chigadzirwa chako online: www.avanteaudio.com. Kunyoreswa kwechigadzirwa pamhepo kunodiwa kuitira kuti uite gore rechitatu rewaranti yemakore matatu. Zvese zvakadzoserwa sevhisi zvinhu, ingave zviri pasi pewaranti kana kwete, zvinofanirwa kunge zviri zvekutakura zvakabhadharwa uye zvichiperekedzwa nemvumo yekudzosa (RA) nhamba. Nhamba yeRA inofanira kunyorwa zvakajeka kunze kwepasuru yekudzorera. Tsanangudzo pfupi yedambudziko pamwe nenhamba yeRA inofanirawo kunyorwa pasi papepa uye kuiswa mumudziyo wekutumira. Kana iyo unit iri pasi pewaranti, unofanirwa kupa kopi yehumbowo hwekutenga invoice, uye unit inofanira kunyoreswa online pa www.avanteaudio.com kuti igamuchire gore rechitatu re3-year waranti. Zvinhu zvakadzoserwa zvisina nhamba yeRA yakanyorwa zvakajeka kunze kwepasuru zvicharambwa uye kudzoserwa nemari yemutengi. Unogona kuwana nhamba yeRA nekubata rutsigiro rwevatengi.

LIMITED WARRANTY (USA CHETE)

1. ADJ Zvigadzirwa, LLC pano inopa mvumo, kumutengi wepakutanga, zvigadzirwa zveAVANTE kuti dzisave nekukanganisa kwekugadzira muzvinhu uye kugadzira kwenguva yakatarwa inosvika makore matatu (3 mazuva) kubva pazuva rekutanga rekutenga. Chigadzirwa chinofanira kunyoreswa pamhepo pa www.avanteaudio.com kuitira kuti ishandise gore rechitatu re1,095-gore waranti nguva. Waranti iyi ichashanda chete kana chigadzirwa chakatengwa mukati meUnited States of America, kusanganisira midziyo nenzvimbo. Ibasa remuridzi wekuona zuva nenzvimbo yekutenga neumboo hunogamuchirwa panguva iyo sevhisi inotsvakwa.
2. Pabasa rewaranti unofanirwa kuwana nhamba yeReturn Authorization (RA#) usati watumira chigadzirwa; ndapota taura neADJ Zvigadzirwa, LLC Sevhisi Dhipatimendi pa 800-322-6337. Tumira chigadzirwa chete kune ADJ Zvigadzirwa, LLC fekitori. Mari dzese dzekutumira dzinofanirwa kubhadharwa kare. Kana iyo yakakumbirwa kugadzirisa kana sevhisi (kusanganisira kutsiva zvikamu) zviri mukati mezvirevo zvewaranti iyi, ADJ Zvigadzirwa, LLC ichabhadhara kudzorera mari yekutumira chete kunzvimbo yakatarwa mukati meUnited States. Kana chiridzwa chose chikatumirwa, chinofanira kutumirwa mupasuru yayo yepakutanga. Hapana zvishandiso zvinofanirwa kutumirwa nechigadzirwa. Kana chero zvishongedzo zvakatumirwa nechigadzirwa, ADJ Zvigadzirwa, LLC haizovi nemhosva yekurasikirwa kana kukuvadzwa kune chero zvishongedzo zvakadaro, kana kuti kudzoka kwakachengeteka.
3. Waranti iyi haina kana serial nhamba yakashandurwa kana kubviswa; kana chigadzirwa chakagadziridzwa chero nzira iyo ADJ Zvigadzirwa, LLC inopedzisa, mushure mekuongorora, inokanganisa kuvimbika kwechigadzirwa; kana chigadzirwa chagadziriswa kana kushandiswa nemumwe munhu kunze kwefekitori yeADJ Products, LLC kunze kwekunge mvumo yakanyorwa yakapihwa mutengi neADJ Products, LLC; kana chigadzirwa chakanganiswa nekuti hachina kuchengetedzwa zvakanaka sezvakarongwa mubhuku remirayiridzo.
4. Ichi hachisi chibvumirano chebasa, uye waranti iyi haisanganisi kugadzirisa, kuchenesa kana kuongorora nguva nenguva. Munguva yataurwa pamusoro apa, ADJ Zvigadzirwa, LLC ichatsiva zvikamu zvakakanganisika nemubhadharo wayo nezvikamu zvitsva kana zvakagadziridzwa, uye inotora mari yese yewaranti sevhisi uye kugadzirisa basa nekuda kwekukanganisa kwezvinhu kana kugadzirwa. Basa rega reADJ Zvigadzirwa, LLC pasi pewarandi iyi richangogumira pakugadzirisa chigadzirwa, kana kuchitsiviwa, kusanganisira zvikamu, pakufunga kwega kweADJ Zvigadzirwa, LLC. Zvese zvigadzirwa zvakafukidzwa newaranti iyi zvakagadzirwa mushure meNyamavhuvhu 15, 2012, uye zvine mamaki anozivisa izvozvo.
5. ADJ Zvigadzirwa, LLC inochengetera kodzero yekuita shanduko mukugadzira uye/kana kuvandudza pane zvigadzirwa zvayo pasina chisungo chekusanganisa idzi shanduko mune chero zvigadzirwa zvinogadzirwa. Hapana waranti, ingave inoratidzwa kana kurehwa, inopihwa kana kugadzirwa maererano nechero chinhu chinopihwa nezvigadzirwa zvinotsanangurwa pamusoro. Kunze kwekusvika padanho rinorambidzwa nemutemo unoshanda, zvese zvinorehwa waranti dzakagadzirwa neADJ Zvigadzirwa, LLC zvine chekuita nechigadzirwa ichi, kusanganisira waranti yekutengesa kana kusimba, inoganhurirwa munguva yewaranti yatarwa pamusoro. Uye hapana waranti, ingave inoratidzwa kana kurehwa, kusanganisira waranti yekutengesa kana kusimba, ichashanda kuchigadzirwa ichi mushure mekunge nguva yataurwa yapera. Mutengi uye/kana Mutengesi chete mushonga uchave wakadaro kugadzirisa kana kutsiva sezvakatsanangurwa pamusoro apa; uye pasina mamiriro ezvinhu ADJ Zvigadzirwa, LLC ichave nemhosva yekurasikirwa kana kukuvadzwa, kunanga kana kukonzeresa, zvichibva mukushandiswa, kana kusakwanisa kushandisa, chigadzirwa ichi. Iyi waranti ndiyo yega waranti yakanyorwa inoshanda kune ADJ Zvigadzirwa, LLC Zvigadzirwa uye inotsiva ese ekutanga waranti uye tsananguro yakanyorwa yewaranti mazwi nemamiriro akaburitswa.
6. Warranty Kunyoresa: Ndokumbira unyore chigadzirwa chako online: wwww.avanteaudio.com. Kunyoreswa kwechigadzirwa pamhepo kunodiwa kuitira kuti uite gore rechitatu rewaranti yemakore matatu. Zvese zvakadzoserwa sevhisi zvinhu, ingave zviri pasi pewaranti kana kwete, zvinofanirwa kunge zviri zvekutakura zvakabhadharwa uye zvinoperekedza mvumo yekudzoka (RA) nhamba. Nhamba yeRA inofanira kunyorwa zvakajeka kunze kwepasuru yekudzorera. Tsanangudzo pfupi yedambudziko pamwe nenhamba yeRA inofanirawo kunyorwa pasi papepa uye kuiswa mumudziyo wekutumira. Kana iyo unit iri pasi pewaranti, unofanirwa kupa kopi yehumbowo hwekutenga invoice uye iyo unit inofanira kunyoreswa online pa. www.avanteaudio.com kugamuchira gore rechitatu re3-year warranty. Zvinhu zvakadzoserwa zvisina nhamba yeRA yakanyorwa zvakajeka kunze kwepasuru zvicharambwa uye kudzoserwa nemari yemutengi. Unogona kuwana nhamba yeRA nekubata rutsigiro rwevatengi.

ZVINOTAURWA NEKUCHENGETEKA

Mutauri uyu chimedu chemagetsi chemagetsi. Kuti uve nechokwadi chekushanda kwakatsetseka, zvakakosha kutevedzera mirairo yese uye nhungamiro mugwaro rino. AVANTE haina mhosva yekukuvara
uye/kana kukuvara kunobva mukushandiswa zvisizvo kwemukurukuri uyu nekuda kwekusakoshesa ruzivo rwakadhindwa mubhuku rino. Vanokwanisa chete uye/kana vashandi vane zvitupa ndivo vanofanira kuisa mutauri uyu uye zvese zvinosanganisirwa uye/kana zvokusarudza zvokubikisa zvinhu. Chekutanga chete chinosanganisirwa uye/kana chekusarudza rigging zvikamu uye zvishongedzo zvemukurukuri uyu ndizvo zvinofanirwa kushandiswa kumisikidzwa kwayo. Chero zvigadziriso kumukurukuri, zvinosanganisirwa uye/kana zvokusarudza zvokubatisa zvidimbu nemidziyo zvinobvisa waranti yemugadziri wepakutanga uye kuwedzera njodzi yekukuvara uye/kana kukuvara kwako.

CHIDZIDZO CHECHIKORO 1 – MUTAURIRI ANOFANIRA KUGADZIRWA ZVAKANAKA

KUTI UDERERE NJODZI YEKUDIKISA NEmagetsi, USABvisa KAVHA YEKUNZE.
HAPANA ZVINHU ZVINOSHANDISWA ZVINOSHANDISWA MUKATI MUTAURIRI IYI.
USAYEDZA KUGADZIRIRA PAMWE PAMWE, SEKUITA ZVOKUITA KUCHABVISA WARRANTI YEMUgadziri WAKO. KUKANGAZWA ZVINOBVA KUBVA KUCHINJWA KWEMUTAURIRI UYU UYE/KANA KUREHWA KWEMIrairo YEKUCHENGETEKA NEMIGARO MUBHUKU IYI ZVINOSHAYA WARANTI YEMUgadziri UYE HAZVI ZVIRI KUNYORE PAKUMIRO CHEWARANTI UYE/KANA KUGADZIRIRWA.
Usafe wakavhura INO MUTAURIRI UCHISHANDISWA!
UNPLUG SIMBA USATI WASHANDA MUTAURIRI!
CHENGA ZVINHU ZVINOTIRA KURE KURE PAMUTAURIRI!

ZVINHU ZVAKAoma SHANDISA CHETE!
USARAYERA MUTAURI KUNAYA KUNAYA UYE/KANA UFURO!
USADIRIRA MVURA UYE/KANA ZVINHU ZVINHU PAKATI KANA KUPINDA MUTH

ZVINOTAURWA NEKUCHENGETEKA

Mutauri uyu ndeweKUSHANDISWA NEZVINHU CHETE! Verenga ese MAZANO uye uteedzere YAMBIRO yese!

• USASHANDISE mutauri pedyo nekunyorova uye/kana damp nzvimbo. Mutauriri anofanira kuchengetedzwa kure nekunanga
  kusangana nezvinwiwa uye hazvifanirwe kuratidzwa kumvura/kudonha kwemvura kana kupfachuka.
  • USAYEDZA kuisa uye/kana kushanda pasina ruzivo kuti ungazviita sei. Bvunza nyanzvi yekuisa midziyo yegudzanzwi kuti uise mutauriri akakodzera uye akachengeteka. CHETE chepakutanga chinosanganisirwa uye/kana chekubirira zvidimbu uye zvishongedzo zvakanyorwa mubhuku rino ndizvo zvinofanirwa kushandiswa kuisa nekushanda.
• USAfumura chero chikamu chemukurukuri kuvhura moto kana chiutsi, kana chinzvimbo chemutauri pedyo
  chero zvinhu zvinopisa panguva yekushanda. Mukurukuri ane simba remukati ampbvisa izvozvo
  inoburitsa kupisa panguva yekushandisa.
• Chengetedza mutauri kure nenzvimbo dzekupisa dzakaita semaradiyeta, marejita ekupisa, zvitofu, kana zvimwe midziyo (kusanganisira amplifiers) zvinoburitsa kupisa.
• Iva nechokwadi chekuisa iyi sipika munzvimbo inobvumira mhepo yakanaka. Bvumira dzinenge 6
  inches (152mm) kuseri kwekabati yemukurukuri yekutonhodza zvakanaka.
• USASHANDISE sipika kana tambo yemagetsi yakapwanyika, yakaremerwa, yakuvadzwa, uye/kana kana imwe yemagetsi tambo yekubatanidza yakanganiswa uye usaise mutauriri zvakachengeteka zviri nyore. Usambomanikidzira tambo yemagetsi mutauriri. Kana tambo yemagetsi kana chero yezvibatanidza zvayo ikakuvadzwa, idzore ipapo nekukasira neitsva yesimba rakafanana.
• USAbvisa mutauri, sezvo pasina HAPANA mushandisi anoshanda zvikamu mukati. Tumira masevhisi ese kuvashandi vanokwanisa. Sevhisi inodiwa kana mutauri akuvadzwa neimwe nzira, sekukuvadzwa kwetambo yemagetsi-yekugovera kana plug, kusangana nemvura, mvura, kana hunyoro, zvinhu zvinowira pamutauriri kana kudonha kwemutauri pachayo, kana chero basa risingaite. .
• USAkunda chinangwa chekuchengetedza chepolarized kana yekudzika-mhando plug. Polarized plug ine mablades maviri ane yakakura kupfuura imwe. Ipuragi yemhando yepasi ine mablades maviri uye yechitatu yekugadzika prong. Iyo yakafara blade kana yechitatu prong inopihwa kuchengetedza kwako. Kana iyo plug yakapihwa isingakwane mudura rako, bvunza nyanzvi yemagetsi kuti inotsiva iyo yasakara kubuda.
• SIMBA SOURCES: Ichi chigadzirwa chinofanira kunge chakabatana chete kune magetsi emhando inotsanangurwa mune iyi mirairo yekushandisa, kana seyakaiswa pane iyo unit. Ichi chigadzirwa chakanangana neNyika.
• ROTECTIVE PARTTHING TERMINAL: Mukurukuri anofanira kunge akabatana nesoketi huru
  ine inodzivirira pasi-pasi/ivhu kubatana.
• CHETE bata tambo yemagetsi nepanoperera plug, uye usambodhonza plug nekudhonza chikamu chewaya chetambo.
• USASHANDISE zvinonyungudutsa kana girazi kuchenesa mutauri. Chenesa chete nemucheka wakaoma.
• GARA bvisa mutauri kubva kune huru sosi yemagetsi usati waita chero sevhisi kana kuchenesa
  nzira.
• CHENJERERO: Kuti udzivise kukuvara kwemuviri, verenga mirairo yekuisa nekungwarira usati waisa.
• CHENJERERO: Kuteerera vatauri nevhoriyamu yakakwirira kwenguva yakareba kana mukati mepedyo nekugona kukuvadza kunzwa.
• CHENJERERO: Vatauri vanofanirwa kuiswa / kushandiswa nevano kwanisa uye vakadzidziswa CHETE.
• CHENJERERO: Gara uchiisa vatauri nenzira yakachengetedzeka uye yakagadzikana.
• CHENJERERO: Pfeka midziyo yekuchengetedza yakakodzera panguva yekuisa sipika.
• CHENJERERO: Simba renzira uye tambo dzekuteerera kuitira kuti ZVISATI zvingangofambwa kana kutsinwa.
• CHENJERERO: Bvisa mutauri panguva yemadutu emheni uye/kana kana usina kushandiswa kwenguva refu.
• SHANDISA chete zvekutanga zvekurongedza zvinhu uye/kana kesi kutakura mutauri wesevhisi.
• PLEASE dzokorora mabhokisi ekutumira uye kurongedza pese pazvinogoneka.

MATINANCE ZVINOTAURIRA

• Kugaro gadzirisa kunodiwa kuti ugone kukwidziridza hunogona kushanda hupenyu hwevatauri.
• Verenga iyo yekumisikidza uye mirairo yekushanda kuitira kuti uzvizive iwe pachako
  kushanda kwevatauri.
• Kunyangwe vatauri vakaomarara uye vakagadzirirwa kumirisana nemasimba mashoma ekuita kana akaiswa
  nemazvo, kungwarira kunofanira kuramba kutorwa kudzivirira kukanganisa kukanganisa kana uchibata kana kutakura vatauri, kunyanya sikirini mesh sikirini.
• Mukurukuri anofanira kushandirwa nenyanzvi yebasa inokwanisa kana:
  • A. Zvinhu zvawira pa, kana kuti mvura yadeukira mukati, mutauri.
  • B. Mukurukuri asangana nemvura kana mvura.
  • C. Mukurukuri haaratidzike seanoshanda senguva dzose, kana kuti anoratidza kuchinja kukuru mukuita kwake.
  • D. Mutauri adonha uye/kana kuti abatwa zvakanyanya.
• Tarisa mutauri wega wega kuti ane screws dzakasununguka uye/kana zvimwe zvinosungirira.
• Kana mukurukuri akaiswa kana kukwidziridzwa kwenguva yakareba, zvese kubira nekuiswa
  midziyo inofanira kugara ichiongororwa, uye inofanira kutsiviwa kana kugadziriswa sezvinodiwa. Simba guru kune chikwata rinofanira kubviswa panguva yakareba yekusashandisa.
• Kana munhu anotyora-chinja akafamba, chikabudura chedunhu, waya dzinopisa, uye kana chero humwe huipi hunoitika panguva.
  kuitisa bvunzo yemagetsi, rega kuyedza nekukurumidza. Rongedza dambudziko rechikamu (s) kuti uwane dambudziko usati waenderera mberi nechero kuyedzwa kana kushanda.
• Mukurukuri akagadzirirwa kushandiswa munzvimbo dzakaoma chete.
• Kana isiri kushandiswa, chengeta munzvimbo yakaoma, ine mhepo yakanaka yekuchengetera.

PAKUPEDZAVIEW

ZVINOsanganisirwa ZVINHU

• Inoshanda subwoofer ine yakavakirwa musanganiswa, 8 ”mutyairi (x1)
• Mutauri Column - mutauri anoronga nevatyairi vatanhatu (6) 2.75” (x1)
• Riser/Support Column (x1)
• IEC Power Cable (x1)
• Bhegi rekufambisa (x1)

CONNECTIONS & CONTROLS

KUITA ZVINHU

• Plug yekubatanidza kuINPUT 1 (CH1) - tarisa kuti iyo MIC/LINE switch inofanana nekwabva (Mic yemakrofoni nezviridzwa, Mutsetse wemusanganiswa, kiyibhodhi, kana zviridzwa zvine mapikicha anoshanda).
• Plug yekubatanidza kuINPUT 2 (CH2) - enda nenzira imwe chete neINPUT 1.
• Plug yekubatanidza kuINPUT 3 (CH3) - STEREO jack yakanyatsokodzera kushandiswa nenharembozha, nharembozha yekuteerera, kana komputa.
• 10dB LINE jacks yakanyatso kufanira kushandiswa nekhibhodi, dhiramu muchina, kana zvimwe mitsara nhanho michina. Ona chikamu cheBluetooth® Controls kuti ushandise mudziyo usina waya senzvimbo yeINPUT 3.

KUSIMBISA

• Batidza magetsi kune chero midziyo yakabairwa muInput 1 (CH1) , Input 2 (CH2), kana Aux Input (CH3) uye ona kuti mavhoriyamu azvinobuda akwidzwa. (Kazhinji, ruzha rwakanyanya runogona kuwanikwa nekushandura vhoriyamu yekubuda kusvika pakakwirira, wobva wagadzira chero vhoriyamu gadziriso kuburikidza neyekupinza kuwana zvidzoreso zveAS8).
• Simba PAAS8.
• Zvishoma nezvishoma shandura INPUT 1 (CH1) GAIN, INPUT 2 (CH2) GAIN, uye INPUT 3 (CH3) GAIN kusvika panhanho dzinodiwa.

SIMBA/CLIP LED UYE ZVINHU ZVINOKOSHA

• Iyi LED paAS8 inofanirwa kunge yakasvibira kana tambo yemagetsi yeAC yakabatana nemagetsi, uye Simba Switch yakabatidzwa.
• Kana iyi LED ichigara yakatsvuka, zvinoreva kuti imwe yemasaini ekuisa yakakwira zvakanyanya.
• Dzikisa imwe neimwe yekuisa vhoriyamu knob kuti uwane iri kukanganisa, uye isa iyo knob kuti icheke.

FLOOR MONITOR APPLICATIONS

• Dzvanya iyo LOW Equalizer knob pasi zvishoma kuti uderedze isingadiwe rumble uye yakaderera-frequency kuvaka. Izvi zvinoderedza mhinduro uye kuita kuti mazwi ajeke.
• Simba PAAS8. Zvishoma nezvishoma shandura INPUT 1 GAIN, INPUT 2 GAIN, uye INPUT 3 GAIN kusvika pamazinga anodiwa.

KUBADZA VATAURI VAKAWANDA

• Kana uchibatanidza vatauri vakawanda, batanidza zvese zvinopinda
  masosi kune yekutanga AS8 kune iyo LINE IN kubatana kweinotevera AS8, uye enderera neiyo daisy cheni
  kusvika kune yekupedzisira AS8. (Izvi zvinowanzoitika kana akawanda
  monitor vasanganisi vanogovera chikafu chimwechete kubva mumisanganiswa board.)
• Kuti udzivise "mapopu" paunenge uchibatidza / kudzima simba, yekupedzisira AS8 inofanirwa kuve nemagetsi pane yekupedzisira, uye kudzima kutanga.

CONNECTIONS & CONTROLS

1. CHITEKO 1: Kupinza uku kunogashira mapulagi eXLR akaenzana, uye akaenzana/asina kuenzana TRS (tip/ring/sleeve) 1/4” plugs. Seta iyo LINE/MIC switch kuti ienderane nerudzi rwechishandiso chichabatanidzwa kuitira kudzivirira kukanganisa. Paunenge uchishandisa isina kuenzana 1/4 ”chiridzwa jack, tanga nebhatani riri muLINE marongero. Zvino, kana budiriro yakadzikira, dzikisa vhoriyamu, sarudza MIC, uye zvishoma nezvishoma simudza vhoriyamu.
2. CHITEKO 2: Iyi yekupinza inogamuchira yakaenzana XLR plugs, uye yakaenzana/isina kuenzana TRS (tip/ring/sleeve) 1/4” plugs. Seta iyo GTR/MIC switch kuti ienderane nerudzi rwechishandiso chinozobatanidzwa kudzivirira kukanganisa.
   Paunenge uchishandisa isina kuenzanisa 1/4 ”chiridzwa jack, tanga nebhatani riri muGTR marongero. Zvino, kana budiriro yakadzikira, dzikisa vhoriyamu, sarudza MIC, uye zvishoma nezvishoma simudza vhoriyamu.
3. CHANNEL 3 LEVEL KNOB: Iyi knob inoseta vhoriyamu yeChannel 3.
4. CHANNEL 3 AUX JACKS: Iyo diki 1/8 ”jeki ndeyekubatanidza inotakurika audio mudziyo sefoni, komputa, MP3, kana CD inoridza. Iyo L (kuruboshwe) uye R (kurudyi) majaki anogona kushandiswa kune -10dB mutsara nhanho zvishandiso sekiyibhodhi kana madhiramu muchina. Kuti uwane mibairo yakanaka, usashandise iyo 1/8” uye L/R jacks panguva imwe chete.
5. CHINHU 3 BT: Bluetooth® (BT).
6. CHANNEL 3 BLUETOOTH® CONTROLS: Kuti ushandise mudziyo unogonesa Bluetooth sefoni yako kana komputa sosi yeInput 3, unofanira kutanga waibatanidza neAS8 yako. Tarisa kuSetup chikamu chebhuku rino kuti uwane mirairo yakazara.
7. YAkaderera uye YAkakwira EQ KNOBS: Iyo LOW knob ichapa +/- 12dB yekusimudzira kana kucheka pazasi 100Hz. Dzvanya PASI kumusoro kuti uwedzere mabhesi kana kudziya kumutauri. Dzvanya PASI pasi kuti ubvise rumble uye ruzha kana zvinyorwa zvechirongwa zvisina ma frequency akaderera, kana kushandisa mutauri seyekutarisisa pasi. Iyo HIGH knob ichapa +/- 12dB yekusimudzira, kana kucheka pamusoro pe10kHz. Shandura HIGH kumusoro kuti uwedzere kujeka uye tsananguro kumanzwi, acoustic zviridzwa, kana kutsigira tracks. Dzvanya HIGH kuti uderedze kuridza muridzo kana mhinduro.
8. SIMBA/CLIP LED: Iyo yakasvibirira LED paAS8 inoratidza kuti AC tambo yemagetsi yakabatana nemagetsi, uye iyo Power Switch yakabatidzwa. Kana iwe ukaona iyo dzvuku LED apo odhiyo iri kutamba mumukurukuri, izvi zvinoratidza kuti mutauri ari kufambiswa zvakanyanya, uye chinomisikidza chiri kubatanidzwa. Kana iyo CLIP LED ichigara yakavhenekerwa, tanga wadzikisa iyo Gain pane Input chiteshi.
9. LINE OUT 0.0dB: Iyo LINE OUT inopa 0.0dB chiyero chechiratidzo uye inoshandiswa kubatanidza akawanda AS8 mayunitsi pamwe chete uchishandisa imwechete yekuteerera chiratidzo. Batanidza LINE OUT yekutanga AS8 kune Mutsetse Input yeinotevera AS8 munzira yechiratidzo.
10. TWS BUTTON: Tarisa kuSetup chikamu chebhuku rino kuti uwane mirairo yakazara.
11. TWS LED
12. IEC SIMBA INPUT: Iyo IEC yemagetsi tambo plug inoisa mune iyi jack.
13. FUSE: Simba rinofanirwa kudzimwa uye mudziyo unobviswa kubva pachitubu chemagetsi usati watsiva fuse. Ingoshandisa fuse ine simba rimwechete rechiyero, iro rinotsanangurwa pane rekumashure.
14. SIMBA: Inobatidza simba reAS8 KUBATIDZA kana KUTIMIRA.
    

INSTALLATION

USAISA ZVITAURIRI KANA USINA KUKONZERA KUITA SO!
KUGADZIRWA NEZVINHU ZVINOKUDZIDZWA CHETE

ZVINHU ZVINOFANIRA KUONGORORWA NEMUNHU ANE ZVINOGONA KAMWE PAGORE!

YAMBIRO YEZVINHU ZVINOVHARA Chengeta mutauri ari kure nemamita 5.0 (1.5m) kure nezvinhu zvinobvira moto uye/kana pyrotechnics.

KUKUNGAMIRIRA KWEMAGETSI Mugadziri wemagetsi ane hunyanzvi anofanirwa kupedzisa kubatanidza kwemagetsi uye/kana kuisa.

SHANDISA CHENJERERO KANA SIMBA RINOKUBATANISA VATAURI VAKAWANDA SEKUSHAYA SIMBA REMIMWE MAZHINJI MAZHINJI ZVINOGONA KUPFUURA SIMBA RAKAWANDA PAMUTAURIRI UYU. TARIRA SILK SCREEN PASPEAKER FOR MAX AMPS.

YAMBIRO! Kuchengetedzeka uye kukodzera kwechero mudziyo wekusimudza, nzvimbo yekuisa / chikuva, anchoring / rigging / kukwira nzira, Hardware, uye kuisirwa magetsi ndiro basa remugadziri.

Isai mutauri (s), ese maspeaker accessories, uye ese anchoring/rigging/mounting hardware achitevera ese emuno, emunyika, uye emunyika kutengeserana, magetsi, uye kuvaka macode nemirau.

Isa zvitauri (s) munzvimbo dziri kunze kwenzira dzekufamba, nzvimbo dzekugara, uye kana chero nzvimbo yavangave vari pedyo neveruzhinji.

Tora matanho akakodzera ekuchengetedza uye matanho ekuchengetedza paunenge uchiisa midziyo munzvimbo dzingangove nengozi, kunyanya pane kuchengetedzwa kweveruzhinji.

GADZIRIRA

ASSEMBLY

1. Isa mudziyo panzvimbo yaunoda, uye iva nechokwadi chokuti mukurukuri akaiswa nenzira yakachengeteka, yakagadzikana.
2. Ita shuwa kuti SIMBA switch yakadzima.
3. Ita kuti INPUT GAIN 1, INPUT GAIN 2, uye MASTER VOLUME zviri pasi.
4. Isa EQUILIZER maknobs pakati (12 o'clock).
5. Isa Riser/Support Column mune sub.
6. Isa Koramu yeMutauriri muRiser/Support Column.

GADZIRIRA

BLUETOOTH CONNECTION: Kuti ushandise mudziyo unogonesa Bluetooth senharembozha yako kana komputa sosi yeInput 3, unofanira kutanga waibatanidza neAS8 yako.

1. Simba paAS8 yako uye gonesa Bluetooth pane yako sosi mudziyo (foni, komputa, kana imwe nharembozha).
2. Kubva pane yako sosi mudziyo, ratidza runyorwa rwezvakawanikwa zveBluetooth zvishandiso uye tsvaga "AVANTE AS8" ipapo. Kana mudziyo wako usingakwanise kuwana mutauri, edza kutsveta pasi rondedzero kuti uone kuti haina kuvanzika kunze kwe-screen. Kana isina kunyorwa, sunda uye sunungura iyo PAIR/play/pause bhatani paAS8 yako.
3. Kana "AVANTE AS8" yaonekwa pane rondedzero, sarudza. Yako sosi mudziyo uye yako AS8 ichabatana, uye iyo AS8 icharidza chime nekuvhenekera iyo Bluetooth LED kuratidza kuti kubatana kwakabudirira.
4. Tamba odhiyo kubva kune yako Bluetooth sosi mudziyo, uye ikozvino icharidza kuburikidza neINPUT 3 yeAS8 yako sezvo Bluetooth LED inopenya zvishoma nezvishoma.
5. Kudzvanya bhatani PAIR/play/ kumbomira iko zvino kuchadzora kure kutamba/kumbomira kuita kwechishandiso chako, neBluetooth LED inopenya panguva yekutamba, uye yakasimba ichimbomira.
6. Ku "kubvisa" mudziyo wako weBluetooth kubva paInput 3, dzvanya uye ubate bhatani PAIR/play/kumbomira. Iyo LED ichadzima uye iwe uchanzwa kurira.
7. Paunenge uchibatidza paAS8 yako, ichatsvaga chero mudziyo wakambopetwa, uye wobatana nayo otomatiki kana iripo.

TWS MIrairo:

1. Simba pavatauri, wodzvanya bhatani rePAIR kuti ubatanidze mutauri wega wega. Vatauri HAWANA
   kuti zvibatanidzwe mune chero hurongwa, uye ese ari maviri anofanirwa kunge aripo pakupeta.
2. Shandisa bhatani reTWS pamutauri wega wega kuona kuti ndeupi mutauri ari wekutanga (kuruboshwe chiteshi) uye
   inova mutauri wechipiri (chako chekurudyi). Mutauri ane bhatani reTWS rinotanga kudzvanywa
   ichagadzwa semukurukuri wekutanga. Kana TWS mwenje yevatauri vaviri ichipenya, iyo TWS maficha e
   vatauri vaviri ava vachabatanidzwa, uye chiedza chePAIR chemutauri wechipiri chichadzima. Mutauri wechipiri haazowanikwi kuti atarise.
3. Vhura Bluetooth pafoni yako, tsvaga mutauri wekutanga uye ubatane nayo.

Notes:

• Dzvanya bhatani rePAIR kuti ubatidze Bluetooth. Kana iyo PAIR chiratidzo ichibwaira, mutauri ave kuita pairing mode. Kana mutauri asina kubatana kune chero madivayiri (kusanganisira iyo TWS yekubatanidza) mukati me5
  maminetsi, iyo PAIR chiratidzo chinodzima uye mutauri anozobuda otomatiki maitiro. Paunoshandisa mutauri mune imwe modhi, kana bhatani rayo reTWS rikadzvanywa, mwenje weTWS unopenya kwemaminetsi maviri wobva wadzima, izvo zvisingazokanganisa kugona kwemutauri kushanda mune imwechete modhi.
• Mune imwechete mutauri modhi, zvinobuda zveL+R chiteshi zvichasanganiswa. Paunobatanidza maviri
  vatauri vane TWS, mukurukuri mukuru ichiteshi chekuruboshwe uye wechipiri mutauri ndiyo chiteshi chekurudyi.
• Kubuda muTWS modhi, tinya bhatani reTWS pane chero mutauri. Mutauri wechipiri achaburitswa opinda papairing mode.
• Kana iyo TWS yekubatanidza isina kudimburwa nekudzvanya bhatani reTWS, maspeaker maviri 'TWS anozobatana otomatiki mushure mekudzvanya bhatani rePAIR kana simba remutauri rakabatidzwa.
• Kana vatauri vaviri vakabatana neTWS, unogona kudzvanya bhatani rePAIR pane chero mutauri kuti udzime Bluetooth yavo panguva imwe chete.

FREQUENCY CHART

DAMBUDZIKO KUpfurwa

Mixer uye ampLifier haibatike.

Tarisa uone kana tambo yemagetsi inosanganisirwa yakanamirwa mukati memagetsi anoshanda.

Amplifier inodzima kamwe kamwe.

Tarisa uone kana mavhavha emudziyo akavharika. Sezvo mhepo isina kukwana ichizokonzera kuti mudziyo uwedzere kupisa, dzima musanganisi uye uvhure mavhavha kuitira kuti chigadzirwa uye mukati maro. amplifier kutonhora.

Mushure memaminitsi mashoma, chigadzirwa chinofanira kuzvigadzirisa pachacho uye chinogona kudzokera kukutamba kwakajairika.

Iyo SIMBA/CLIP LED iri kuramba ichipenya.

Kana iyo SIMBA/CLIP LED ichipenya, iyo amplifier iri kushandiswa kupfuura kugona kwayo kugadzira. Dzima wobatidza wotangazve kutamba.

Hapana ruzha kubva kumutauri.

Tarisa kuti zviridzwa zvekunze uye/kana maikorofoni zvakabatana nemazvo kune zvinopinda, izvo
masosi akabatidzwa, uye kuti ese cabling inoshanda. Tarisa kuti zvidzoreso zvekupinza zvezvese zvinoshanda zvakaiswa zvakafanira. Kana uchishandisa Bluetooth®, ita shuwa kuti iyo AUX/BLUETOOTH switch set iri kuBluetooth, kuti yako sosi mudziyo uye AS8 zvakabudirira kupetwa, uye kuti yako sosi mudziyo uchiri kushanda (usina kurara kana kunze kwesimba rebhatiri) uye odhiyo ine chikamu chayo chekubuda. control inoiswa kune inonzwika level.

Kukanganisa / ruzha muodhiyo chiratidzo, kana yakaderera yekubuda nhanho.

Iwe unozowanzo tora yakaderera ruzha (hiss) nekuisa sosi mudziyo kubuda kune max, wozogadzira
chero kudzikiswa kwevhoriyamu kuburikidza neiyo AS8 yekupinza tora mapfundo. Tarisa kuti mazinga ekubuda kwechero zvitubu zvemidziyo akaiswa nenzira kwayo, uye kuti zvidzoreso zveINPUT GAIN zvezvese zvinoiswa zvakaiswa pamazinga akakodzera. Tarisa kuti MIC/LINE switch dzega dzega dzakaiswa nenzira kwayo, zvakare. Tarisa uone kana ese ari maviri STEREO jack uye -10dB LINE IN jacks paINPUT 3 ari kushandiswa (akabatana) panguva imwe chete. Kana iyo SIMBA/CLIP LED iri kuvheneka, edza kugadzirisa yega yega INPUT GAIN knob kuti uwane kunobva kuchekerera.

Inzwi rakanyanya kukwidza panguva yezviziviso zvezwi.

Tarisa uone kuti INPUT GAIN level yemaikorofoni yakanyanyokwirisa here, kana kuti nhanho dzezvimwe zvaunopinza dzakanyanya kuderera, pangava pamudziyo (s), kana pazvidzori zvavo zveINPUT GAIN.

Kunze kweiyo inoshanda yeBluetooth® audio renji yemudziyo.

Inoshanda mutsara-wekuona-renji inosvika 50 tsoka. Kuitwa kusina waya kwechishandiso kunokanganiswa zvakanyanya nemadziro kana simbi, kukanganiswa neWiFi, kana zvimwe zvisina waya.

DIMENSIONAL ZVINHU

ZVAKAITIKA ZVINHU

AMPHUPENYU:

• Zvinopinza Maviri eXLR/TRS combo jacks, Stereo 1/4” mapindiro, Stereo 1/8” yekupinda, Bluetooth®
• Zvinobuda: XLR yakaenzana mutsara kubuda
• Simba rinobuda: RMS 250W (SUB) RMS, 1000W peak
• Vhoriyamu: Input Gain control per channel
• EQ: Main kunze 2 bhendi EQ
• MaODs: Simba / Clip chiratidzo
• Power Input: 100-240V~50/60Hz 250W
• Amplifier: Kirasi D amplifier

ACTIVE VENTED SUBWOOFER:

• Frequency Mhinduro: 55-200Hz
• Max Zvakabuda SPL: 116dB (pamax. amp kubuda)
• Impedance: 4 Ohm
• Mutyairi: 8-inch neodymium subwoofer, 1.5” inzwi coil, 28 oz. magineti
• Cabinet: PP plastiki
• Grill: 1.0mm simbi
• Dimensions: 13.8 "x 16.9" x 16.3 "/ 350mm x 430mm x 413mm
• Kurema 24 makirogiramu. / 10.8 makirogiramu.

PASSIVE FULL-RANGE SPEAKER COLUMN:

• Frequency Mhinduro: 180-20kHz
• Max. kubuda SPL: 110dB
• Impedance: 4 Ohm
• Mutyairi: 6x 2.75-inch neodymium madhiraivha
• Cabinet: PP plastiki
• Grill: 1.0mm simbi
• Dimensions: 3.8"x3.8"x34.3" / 96x96x870mm (koramu yega yega)
• Kurema 11 lbs. / 5 kg. (chikamu chimwe nechimwe)

PANE PANE:

• 4 yekupinza musanganisi ine mutsara kunze
• Maviri (2) Mic/Line Input (XLR/TRS Combo)
• Maviri (2) Gitare/Mutsetse Input (1/4” Stereo)
• 1/8” stereo Aux Input
• Kubuda mutsetse (XLR)
• Dual Band EQ
• BLUETOOTH® Connection

YAKWEDZWA CHINZVIMBO:

• Dimensions: 13.8”x16.9”x79.1” / 350x430x2010mm
• Kurema 35 makirogiramu. / 15.8 makirogiramu.

COMPACT POSITION:

• Dimensions: 13.8”x16.9”x47.6” / 350x430x1210mm
• Kurema 30 makirogiramu. / 13.6 makirogiramu.

Zvinoumba & zvishongedzo

SKU: DESCRIPTION
WM219: WM-219 Wireless Maikorofoni System
WM419: WM-419 Wireless Maikorofoni System
VPS564: VPS-80 Maikorofoni
VPS916: VPS-60 Maikorofoni
VPS205: VPS-20 Maikorofoni
PWR571: Pow-R Bar65

Zvinyorwa / Zvishandiso

AVANTEK AS8 Active Line Array PA System [pdf] User Manual AS8 Active Line Array PA System, AS8, Active Line Array PA System, Line Array PA System, Array PA System, PA System

References

• User Manual