AVANTEK AS8 Active Line Array PA System User Manual

©2023 Avante Audio all rights reserved. Cov ntaub ntawv, specifications, daim duab, duab, thiab cov lus qhia
ntawm no yuav raug hloov pauv yam tsis tau ceeb toom. Avante logo thiab txheeb xyuas cov npe khoom thiab tus lej
Ntawm no yog cov cim lag luam ntawm Avante Audio. Kev tiv thaiv kev cai lij choj suav nrog txhua daim ntawv thiab cov teeb meem ntawm
cov ntaub ntawv pov thawj thiab cov ntaub ntawv tam sim no tso cai los ntawm txoj cai lij choj lossis kev txiav txim plaub ntug lossis tom qab tso cai.

Cov npe khoom siv hauv cov ntaub ntawv no yuav yog cov cim lag luam lossis cov npe lag luam ntawm lawv tus kheej
tuam txhab uas muag thiab tau lees paub ntawm no. Tag nrho cov npe uas tsis yog Avante thiab cov khoom npe yog cov cim lag luam
los yog sau npe lag luam ntawm lawv cov tuam txhab.

Avante Audio thiab txhua lub tuam txhab koom nrog ntawm no tsis lees paub ib qho thiab tag nrho cov kev lav phib xaub rau cov cuab yeej, khoom siv,
lub tsev, thiab hluav taws xob puas tsuaj, raug mob rau ib tug neeg, thiab ncaj qha los yog tsis ncaj qha nyiaj txiag poob cuam tshuam
nrog rau kev siv lossis kev tso siab ntawm cov ntaub ntawv muaj nyob hauv daim ntawv no, thiab / lossis los ntawm qhov tshwm sim ntawm qhov
Kev sib dhos tsis raug, tsis zoo, tsis txaus thiab tsis saib xyuas, kev teeb tsa, kev sib tsoo, thiab kev ua haujlwm ntawm cov khoom no.

AVANTE World Headquarters USA
6122 S. Eastern Ave. | Los Angeles, CA 90040 USA
323-316-9722 Ib | Fax: 323-582-2941 Ib | www.avanteaudio.com | yog info@avanteaudio.com

AVANTE NETHERLANDS
Junostraat 2 | 6468 EW Kerkrade | Netherlands +31 45 546 85 00 | Fax: +31 45 546 85 99 | europe@avanteaudio.com

AVANTE MEXICO
Santa Ana 30 | Parque Industrial Lerma | Lerma Mexico 52000 +52 (728) 282.7070 | yog ventas@avanteaudio.com

Teb chaws Europe Daim Ntawv Ceeb Toom Txuag Zog
Energy Saving Matters (EuP 2009/125/EC) Kev txuag hluav taws xob yog ib qho tseem ceeb los pab tiv thaiv ib puag ncig. Thov tua txhua yam khoom siv hluav taws xob
thaum lawv tsis siv. Txhawm rau kom tsis txhob siv hluav taws xob hauv hom tsis ua haujlwm, tshem tawm tag nrho cov khoom siv hluav taws xob los ntawm lub zog thaum tsis siv. Ua tsaug!

Document Version: Ib qho hloov tshiab ntawm cov ntaub ntawv no tuaj yeem muaj nyob online. Thov tshawb xyuas online ntawm www.avante.com rau qhov kev kho tshiab tshiab / hloov tshiab ntawm cov ntaub ntawv no ua ntej pib kev teeb tsa
thiab siv.

Bluetooth® lo lus cim thiab lub logo yog cov cim lag luam uas muaj los ntawm Bluetooth SIG, Inc. thiab kev siv cov cim no los ntawm Avante Audio yog nyob rau hauv daim ntawv tso cai. Lwm cov cim lag luam thiab cov npe lag luam yog cov ntawm lawv cov tswv.

Hnub tim	Cov ntaub ntawv Version	Sau ntawv
02/28/201	1.0	Kev tso tawm thawj zaug
03/13/2019	2.1	Hloov kho phau ntawv hom
03/14/2019	2.2	Taag typos
03/22/2019	2.3	Hloov kho cov ntaub ntawv Hoobkas
09/19/2023	3	Hloov Kho Kev Sib Txuas & Contr

FCC TXUJ CI

Cov cuab yeej no ua raws li Tshooj 15 ntawm FCC Cov Cai. Kev khiav hauj lwm yog ua raws li ob qho xwm txheej hauv qab no: (1) cov cuab yeej no yuav tsis ua rau muaj kev cuam tshuam tsis zoo, thiab (2) cov cuab yeej no yuav tsum lees txais ib qho kev cuam tshuam uas tau txais, suav nrog kev cuam tshuam uas yuav ua rau kev ua haujlwm tsis zoo.

FCC RADIO FREQUENCY INTERFERENCE CEEB TOOM & Cov lus qhia

Cov khoom no tau raug sim thiab pom tias ua raws li cov kev txwv raws li Tshooj 15 ntawm FCC Cov Cai.

Cov kev txwv no yog tsim los muab kev tiv thaiv tsim nyog tiv thaiv kev cuam tshuam tsis zoo hauv kev teeb tsa hauv tsev. Cov cuab yeej no siv thiab tuaj yeem ua kom lub zog ntawm lub xov tooj cua zaus thiab, yog tias tsis tau nruab thiab siv raws li cov lus qhia, yuav ua rau muaj kev cuam tshuam rau kev sib txuas lus hauv xov tooj cua.

Txawm li cas los xij, tsis muaj kev lees paub tias kev cuam tshuam yuav tsis tshwm sim hauv ib qho kev teeb tsa tshwj xeeb. Yog tias cov cuab yeej no ua rau muaj teeb meem cuam tshuam rau lub xov tooj cua lossis TV txais tos, uas tuaj yeem txiav txim siab los ntawm kev tig lub cuab yeej tawm thiab qhib, tus neeg siv tau raug txhawb kom sim kho qhov cuam tshuam los ntawm ib lossis ntau txoj hauv qab no:

• Reorient los yog hloov lub cuab yeej.
• Ua kom muaj kev sib cais ntawm lub cuab yeej thiab lub receiver.
• Txuas lub cuab yeej thiab lub xov tooj cua receiver rau cov hluav taws xob hluav taws xob ntawm cov hluav taws xob sib cais.
• Nrog rau tus neeg muag khoom lossis tus kws tshaj lij xov tooj cua / TV rau kev pab.

Cov ntaub ntawv dav dav

Taw qhia

Tus neeg hais lus no yog tsim los siv rau kev tshaj lij xwb. Thov nyeem thiab nkag siab tag nrho cov lus qhia thiab
cov lus qhia hauv phau ntawv no ua tib zoo thiab ua tib zoo ua ntej sim ua haujlwm cov neeg hais lus. Cov lus qhia no muaj cov ntaub ntawv tseem ceeb hais txog kev nyab xeeb, kev teeb tsa, thiab kev siv.

UNPACKING

Txhua tus neeg hais lus tau raug kuaj kom zoo thiab tau raug xa mus rau hauv kev ua haujlwm zoo.
Ua tib zoo xyuas lub thawv xa khoom rau kev puas tsuaj uas yuav tshwm sim thaum lub sijhawm xa khoom. Yog tias lub thawv pom tau raug puas lawm, ua tib zoo tshuaj xyuas tus neeg hais lus kom puas tsuaj thiab xyuas kom txhua yam khoom siv tsim nyog rau nruab thiab ua haujlwm tus hais lus tau tuaj txog lawm. Yog tias qhov kev puas tsuaj tau pom los yog cov khoom ploj lawm, thov hu rau peb pab neeg txhawb nqa rau cov lus qhia ntxiv. Thov tsis txhob xa rov qab tus neeg hais lus no rau koj tus neeg muag khoom yam tsis tau hu rau tus neeg siv khoom txhawb nqa ntawm tus lej hauv qab no. Thov tsis txhob muab lub thawv xa khoom pov tseg rau hauv lub thoob khib nyiab. Thov rov siv dua thaum twg los tau.

KEV PAB CUAM
AVANTE muab cov neeg siv khoom txhawb nqa kab los muab kev pab cuam, pab nrog cov lus nug lossis
teeb meem uas yuav tshwm sim thaum lub sij hawm teeb tsa los yog pib installation, thiab rau tej yam kev pab cuam cuam tshuam txog cov teeb meem. Koj
kuj tuaj yeem tuaj xyuas peb ntawm web ntawm www.avanteaudio.com rau cov lus pom lossis cov lus qhia.
AVANTE SERVICE USA - Monday - Friday 8:00 teev sawv ntxov txog 4:30 teev tsaus ntuj PST
Suab: 800-322-6337 Ib Fax: 323-532-2941 Ib
support@avanteaudio.com
AVANTE SERVICE EUROPE - Monday - Friday 08:30 txog 17:00 CET
Xov tooj: +31 45 546 85 30 Fax: +31 45 546 85 96
europe@avanteaudio.com

TXOJ CAI SAWV DAWS

Thov sau npe koj cov khoom hauv online: www.avanteaudio.com. Kev sau npe ntawm cov khoom lag luam hauv online yuav tsum tau txhawm rau txhawm rau qhib lub xyoo thib peb ntawm 3 xyoo lav. Tag nrho cov khoom xa rov qab, txawm tias nyob rau hauv warranty los yog tsis, yuav tsum yog cov khoom thauj ua ntej them thiab nrog rau tus lej tso cai rov qab (RA). Tus lej RA yuav tsum tau sau kom meej rau sab nraud ntawm pob khoom xa rov qab. Cov lus piav qhia luv luv ntawm qhov teeb meem nrog rau tus lej RA kuj yuav tsum tau sau rau ntawm ib daim ntawv thiab suav nrog hauv lub thawv xa khoom. Yog hais tias chav tsev nyob rau hauv warranty, koj yuav tsum muab ib daim qauv ntawm koj cov ntaub ntawv pov thawj ntawm daim ntawv yuav khoom, thiab chav tsev yuav tsum tau sau npe online ntawm www.avanteaudio.com kom tau txais xyoo 3 ntawm 3 xyoo warranty. Cov khoom xa rov qab yam tsis muaj tus lej RA qhia meej rau sab nraud ntawm pob yuav raug tsis lees paub thiab xa rov qab ntawm tus neeg siv khoom tus nqi. Koj tuaj yeem tau txais tus lej RA los ntawm kev tiv tauj cov neeg siv khoom txhawb nqa.

LIMITED Warranty (USA nkaus xwb)

1. ADJ Cov Khoom, LLC tau lees paub, rau tus neeg yuav khoom thawj, AVANTE cov khoom lag luam kom tsis muaj kev tsim khoom tsis zoo hauv cov khoom siv thiab kev ua haujlwm rau lub sijhawm teem tseg txog li 3 xyoos (1,095 hnub) txij li thawj hnub yuav khoom. Cov khoom lag luam yuav tsum tau sau npe online ntawm www.avanteaudio.com txhawm rau qhib xyoo 3 ntawm lub sijhawm lav 3 xyoos. Qhov kev lees paub no tsuas yog siv tau yog tias cov khoom yuav khoom hauv Tebchaws Meskas, suav nrog cov khoom thiab thaj chaw. Nws yog tus tswv lub luag haujlwm los tsim lub hnub thiab qhov chaw ntawm kev yuav khoom los ntawm cov pov thawj pom zoo thaum lub sijhawm nrhiav kev pabcuam.
2. Rau kev pab cuam lav koj yuav tsum tau txais daim ntawv tso cai xa rov qab (RA#) ua ntej xa cov khoom rov qab; thov hu rau ADJ Products, LLC Service Department ntawm 800-322-6337 Ib. Xa cov khoom tsuas yog rau ADJ Cov Khoom, LLC Hoobkas. Tag nrho cov nqi shipping yuav tsum tau them ua ntej. Yog tias qhov kev thov kho lossis kev pabcuam (nrog rau cov khoom hloov pauv) yog nyob rau hauv cov nqe lus ntawm qhov kev lees paub no, ADJ Cov Khoom, LLC yuav them rov qab cov nqi thauj khoom tsuas yog mus rau qhov chaw nyob hauv Tebchaws Meskas. Yog tias tag nrho cov cuab yeej raug xa mus, nws yuav tsum raug xa mus rau hauv nws cov pob thawj. Tsis muaj accessories yuav tsum tau xa nrog cov khoom. Yog tias ib qho khoom siv raug xa nrog cov khoom, ADJ Cov Khoom, LLC yuav tsum tsis muaj kev lav phib xej rau kev poob lossis kev puas tsuaj rau ib qho khoom siv li no, lossis kom muaj kev nyab xeeb rov qab los ntawm nws.
3. Qhov kev lees paub no tsis muaj dab tsi yog tias tus lej xov tooj tau raug hloov lossis tshem tawm; yog tias cov khoom raug hloov kho nyob rau hauv txhua yam uas ADJ Cov Khoom, LLC xaus lus, tom qab kuaj xyuas, cuam tshuam rau kev ntseeg siab ntawm cov khoom; yog tias cov khoom tau raug kho lossis muab kev pabcuam los ntawm lwm tus uas tsis yog ADJ Cov Khoom, LLC Hoobkas tshwj tsis yog muaj ntawv tso cai ua ntej tau muab rau tus neeg yuav khoom los ntawm ADJ Cov Khoom, LLC; yog tias cov khoom puas vim nws tsis raug tswj kom zoo raws li tau teev tseg hauv phau ntawv qhia.
4. Qhov no tsis yog daim ntawv cog lus kev pabcuam, thiab qhov kev lees paub no tsis suav nrog kev saib xyuas, tu lossis kuaj xyuas lub sijhawm. Thaum lub sijhawm teev tseg saum toj no, ADJ Cov Khoom Muag, LLC yuav hloov cov khoom tsis raug ntawm nws cov nqi nrog cov khoom tshiab lossis kho dua tshiab, thiab yuav nqus tag nrho cov nuj nqis rau kev pab cuam thiab kho cov neeg ua haujlwm vim qhov tsis xws ntawm cov khoom siv lossis kev ua haujlwm. Lub luag haujlwm ib leeg ntawm ADJ Cov Khoom, LLC raws li qhov kev lees paub no yuav raug txwv rau kev kho cov khoom, lossis hloov cov khoom, suav nrog cov khoom, ntawm kev txiav txim siab ntawm ADJ Cov Khoom, LLC. Tag nrho cov khoom lag luam uas tau lees paub los ntawm qhov kev lees paub no tau tsim tom qab Lub Yim Hli 15, 2012, thiab dais cov cim qhia txog qhov tshwm sim.
5. ADJ Cov Khoom, LLC muaj txoj cai los hloov cov qauv tsim thiab / lossis kev txhim kho ntawm nws cov khoom yam tsis muaj lub luag haujlwm los suav nrog cov kev hloov pauv no hauv cov khoom ua ntej tsim. Tsis muaj warranty, txawm hais los yog implied, yog muab los yog ua raws li cov khoom siv nrog cov khoom tau piav qhia saum toj no. Tsuas yog rau qhov txwv tsis pub los ntawm txoj cai lij choj, tag nrho cov lus lees paub ua los ntawm ADJ Cov Khoom, LLC cuam tshuam nrog cov khoom no, suav nrog kev lees paub ntawm kev ua lag luam lossis kev nyab xeeb, raug txwv rau lub sijhawm rau lub sijhawm lav tau teev tseg saum toj no. Thiab tsis muaj kev lav phib xaub, txawm hais tias tau hais los yog txhais tau, suav nrog kev lees paub ntawm kev ua lag luam lossis kev nyab xeeb, yuav tsum siv rau cov khoom no tom qab lub sijhawm ntawd tas lawm. Cov neeg siv khoom thiab / lossis tus neeg muag khoom ib leeg yuav tsum kho lossis hloov kho raws li tau hais tseg saum toj no; thiab tsis muaj ib qho xwm txheej twg yuav tsum ADJ Cov Khoom, LLC yuav tsum lav rau ib qho kev poob lossis kev puas tsuaj, ncaj qha lossis qhov tshwm sim, tshwm sim ntawm kev siv, lossis siv tsis tau, cov khoom no. Qhov kev lees paub no tsuas yog daim ntawv pov thawj nkaus xwb uas siv tau rau ADJ Cov Khoom, LLC Cov Khoom thiab hloov pauv tag nrho cov kev lees paub ua ntej thiab sau cov lus piav qhia ntawm cov lus lees paub thiab cov xwm txheej ntawm no ua ntej tshaj tawm.
6. Warranty Registration: Thov sau npe koj cov khoom hauv online: www.avanteaudio.com. Kev sau npe ntawm cov khoom lag luam hauv online yuav tsum tau txhawm rau txhawm rau qhib lub xyoo thib peb ntawm 3 xyoo lav. Tag nrho cov khoom xa rov qab, txawm tias nyob rau hauv warranty los yog tsis, yuav tsum yog freight pre-pay thiab nrog rau daim ntawv tso cai rov qab (RA) tooj. Tus lej RA yuav tsum tau sau kom meej rau sab nraud ntawm pob khoom xa rov qab. Cov lus piav qhia luv luv ntawm qhov teeb meem nrog rau tus lej RA kuj yuav tsum tau sau rau ntawm ib daim ntawv thiab suav nrog hauv lub thawv xa khoom. Yog tias chav tsev nyob rau hauv warranty, koj yuav tsum muab ib daim qauv ntawm koj daim ntawv pov thawj ntawm kev yuav khoom thiab chav tsev yuav tsum tau sau npe online ntawm www.avanteaudio.com kom tau txais xyoo 3 ntawm 3 xyoo warranty. Cov khoom xa rov qab yam tsis muaj tus lej RA qhia meej rau sab nraud ntawm pob yuav raug tsis lees paub thiab xa rov qab ntawm tus neeg siv khoom tus nqi. Koj tuaj yeem tau txais tus lej RA los ntawm kev tiv tauj cov neeg siv khoom txhawb nqa.

SAFETY GUIDELINES

Tus neeg hais lus no yog ib yam khoom siv hluav taws xob zoo tshaj plaws. Txhawm rau lav kev ua haujlwm zoo, nws yog ib qho tseem ceeb uas yuav tsum ua raws li tag nrho cov lus qhia thiab cov lus qhia hauv phau ntawv no. AVANTE tsis yog lub luag haujlwm rau kev raug mob
thiab/lossis kev puas tsuaj uas tshwm sim los ntawm kev siv tus neeg hais lus tsis raug cai vim tsis saib xyuas cov ntaub ntawv luam tawm hauv phau ntawv no. Tsuas yog cov neeg ua haujlwm tsim nyog thiab / lossis cov neeg ua haujlwm tau lees paub yuav tsum ua qhov kev teeb tsa ntawm tus neeg hais lus no thiab tag nrho cov suav nrog thiab / lossis xaiv cov khoom siv rigging. Tsuas yog cov thawj suav nrog thiab/lossis xaiv qhov chaw rigging thiab accessories rau tus hais lus no yuav tsum tau siv rau kev teeb tsa kom raug. Ib qho kev hloov kho rau tus neeg hais lus, suav nrog thiab / lossis xaiv cov khoom siv rigging thiab cov khoom siv yuav ua rau lub chaw tsim khoom tsis raug lees paub thiab ua rau muaj kev pheej hmoo ntawm kev puas tsuaj thiab / lossis kev raug mob ntawm tus kheej.

TXOJ CAI 1 – Tus neeg hais lus yuav tsum tau ua kom zoo nyob hauv av

Txhawm rau txo qhov kev pheej hmoo ntawm hluav taws xob hluav taws xob, tsis txhob tshem tawm sab nraud.
Tsis muaj cov neeg siv khoom pabcuam hauv cov neeg hais lus no.
Tsis txhob sim kho koj tus kheej, ib yam li ua li ntawd yuav ua rau koj lub chaw tsim khoom tsis lees paub. Kev puas tsuaj uas tshwm sim los ntawm kev hloov kho rau tus neeg hais lus no thiab/lossis kev tsis saib xyuas ntawm cov lus qhia txog kev nyab xeeb thiab cov lus qhia hauv phau ntawv no tsis ua rau tus neeg tsim khoom muaj kev lav phib xaub thiab tsis raug rau ib qho kev lav phib xaub.
Tsis txhob qhib tus hais lus no thaum siv!
UNPLUG fais fab ua ntej muab kev pabcuam hais lus!
Khaws cov khoom siv hluav taws xob nyob deb ntawm tus neeg hais lus!

QHOV CHAW UA HAUJ LWM SIV nkaus xwb!
TSIS TXHOB nthuav tawm cov neeg hais lus los nag thiab/lossis ntub dej!
Tsis txhob nchuav dej thiab/los sis kua dej rau hauv los yog mus rau hauv

SAFETY GUIDELINES

Tus neeg hais lus no yog rau PROFESSIONAL SIV nkaus xwb! Nyeem tag nrho cov lus qhia thiab ua raws tag nrho cov lus ceeb toom!

• TSIS TXHOB siv tus neeg hais lus nyob ze ntub dej thiab/los yog damp qhov chaw. Tus neeg hais lus yuav tsum nyob deb ntawm qhov ncaj
  tiv nrog cov kua thiab yuav tsum tsis txhob raug dej/kua dripping los yog txaws.
  • Tsis txhob sim teeb tsa thiab / lossis ua haujlwm yam tsis paub yuav ua li cas. Tham nrog tus kws tshaj lij cov khoom siv suab nrov rau kev teeb tsa tus hais lus kom raug thiab nyab xeeb. Tsuas yog cov thawj suav nrog thiab/lossis xaiv rigging qhov chaw thiab cov khoom siv hauv phau ntawv no yuav tsum tau siv rau kev teeb tsa thiab kev ua haujlwm.
• TSIS TXHOB nthuav tawm ib feem ntawm tus neeg hais lus kom qhib nplaim taws lossis haus luam yeeb, lossis tus neeg hais lus nyob ze
  txhua yam khoom siv hluav taws xob thaum ua haujlwm. Tus neeg hais lus muaj lub zog sab hauv amplifier tias
  ua kom sov thaum siv.
• Khaws cov neeg hais lus kom deb ntawm qhov chaw kub xws li cov hluav taws xob, cov ntawv sau cua sov, qhov cub, lossis lwm yam khoom siv (nrog rau amplifiers) uas ua kom sov.
• Nco ntsoov nruab tus neeg hais lus no hauv thaj chaw uas yuav tso cai rau qhov cua kom zoo. Cia kwv yees li 6
  ntiv tes (152mm) tom qab lub thawv hais lus kom txias kom zoo.
• TSIS TXHOB ua haujlwm tus neeg hais lus yog tias lub hwj chim qaum yog frayed, crimped, puas, thiab / lossis yog tias ib qho ntawm cov hlua txuas hluav taws xob puas lawm thiab tsis txhob ntxig rau hauv tus hais lus kom ruaj ntseg nrog yooj yim. TSIS TXHOB yuam ib lub hwj chim txuas rau hauv tus neeg hais lus. Yog hais tias lub hwj chim qaum los yog ib qho ntawm nws cov connectors puas lawm, hloov tam sim ntawd nrog ib tug tshiab ntawm tib lub hwj chim ntsuam xyuas.
• TSIS TXHOB disassemble tus neeg hais lus, vim tsis muaj cov neeg siv khoom siv khoom siv hauv. Xa tag nrho cov kev pabcuam rau cov neeg ua haujlwm tsim nyog. Kev pabcuam yuav tsum tau ua thaum tus hais lus tau raug puas ntsoog, xws li kev puas tsuaj rau lub hwj huam qaum lossis ntsaws, raug cov kua dej, los nag, lossis dej noo, cov khoom poob rau ntawm tus neeg hais lus lossis poob ntawm tus neeg hais lus nws tus kheej, lossis kev ua haujlwm txawv txav. .
• Tsis txhob kov yeej lub hom phiaj kev nyab xeeb ntawm lub polarized lossis grounding-type plug. Ib lub taub hau polarized muaj ob lub hau nrog ib qho dav dua li lwm qhov. Lub hom phiaj hauv av muaj ob lub hau thiab ib qho thib peb grounding prong. Cov hniav dav lossis lub qhov thib peb yog muab rau koj kev nyab xeeb. Yog tias lub ntsaws ntsaws tsis haum rau hauv koj lub qhov hluav taws xob, sab laj nrog tus kws tshaj lij hluav taws xob hloov lub qhov hluav taws xob uas siv tsis tau.
• POWER SOURCES: Cov khoom no yuav tsum tau txuas nrog lub hwj chim ntawm hom uas tau piav qhia hauv cov lus qhia kev khiav hauj lwm no, lossis raws li cim rau ntawm chav tsev. Cov khoom no yog Lub Tebchaws Tshwj Xeeb.
• ROTECTIVE EARTHING TERMINAL: Tus hais lus yuav tsum txuas nrog lub qhov hluav taws xob loj
  nrog kev tiv thaiv lub ntiaj teb-hauv av / av sib txuas.
• Tsuas yog tuav cov hlua hluav taws xob los ntawm qhov kawg ntsaws, thiab tsis txhob rub lub ntsaws tawm los ntawm rub lub xaim ntawm txoj hlua.
• Tsis txhob siv cov kuab tshuaj los yog cov tshuaj ntxuav iav los ntxuav tus neeg hais lus. Ntxuav tsuas yog nrog daim ntaub qhuav.
• NTAUB NTAWV THOV NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ NYIAJ MUS NRHIAV LUB CHAW UA HAUJ LWM los ntawm lub hauv paus fais fab ua ntej ua kev pabcuam lossis tu
  txheej txheem.
• CEEB TOOM: Kom tsis txhob muaj kev puas tsuaj rau lub cev, nyeem cov lus qhia kev teeb tsa kom zoo ua ntej kev teeb tsa.
• CEEB TOOM: Kev mloog cov neeg hais lus ntawm qhov ntim siab rau lub sijhawm txuas ntxiv lossis nyob ze ze yuav ua rau lub rooj sib hais tsis zoo.
• CEEB TOOM: Cov neeg hais lus yuav tsum tau teeb tsa / ua haujlwm los ntawm cov kws tshaj lij thiab tau txais kev cob qhia nkaus xwb.
• CEEB TOOM: Yuav tsum nqa cov neeg hais lus kom zoo thiab ruaj khov.
• CEEB TOOM: Hnav cov cuab yeej kev nyab xeeb tsim nyog thaum lub sij hawm hais lus.
• CEEB TOOM: Txoj kab hluav taws xob thiab lub suab kaw kom tsis txhob raug taug kev los yog pinched.
• CEEB TOOM: Unplug tus hais lus thaum muaj cua daj cua dub thiab/los yog thaum tsis siv rau lub sij hawm ntev.
• Tsuas yog siv cov khoom ntim khoom qub thiab/lossis rooj plaub los thauj tus neeg hais lus rau kev pabcuam.
• THOV rov siv dua lub thawv xa khoom thiab ntim khoom thaum twg los tau.

MAINTENANCE GUIDELINES

• Kev saib xyuas tsis tu ncua yog tsim nyog los txhim kho lub peev xwm ua haujlwm ntawm cov neeg hais lus.
• Nyeem cov lus qhia kev teeb tsa thiab kev ua haujlwm kom paub koj tus kheej nrog qhov raug
  kev ua haujlwm ntawm cov neeg hais lus.
• Txawm hais tias cov neeg hais lus yog rugged thiab tsim los tiv thaiv kev cuam tshuam tsis muaj zog thaum nruab
  kom raug, tseem yuav tsum tau saib xyuas kom tsis txhob muaj kev puas tsuaj thaum tuav lossis thauj cov neeg hais lus, tshwj xeeb tshaj yog cov lus mesh screen.
• Tus neeg hais lus yuav tsum tau txais kev pabcuam los ntawm tus kws tshaj lij pabcuam kev pabcuam thaum:
  • A. Cov khoom tau poob rau, lossis cov kua tau nchuav rau hauv, tus neeg hais lus.
  • B. Tus hais lus tau raug los nag lossis dej.
  • C. Tus neeg hais lus tsis tshwm sim ua haujlwm ib txwm, lossis nthuav tawm qhov kev hloov pauv hauv kev ua haujlwm.
  • D. Tus neeg hais lus tau poob thiab/los yog raug kev tuav nruj heev.
• Tshawb xyuas txhua tus hais lus rau cov ntsia hlau xoob thiab/lossis lwm cov fasteners.
• Yog hais tias tus hais lus raug ntsia los yog mounted rau lub sij hawm ntev, tag nrho cov rigging thiab installation
  cov cuab yeej yuav tsum tau kuaj xyuas tsis tu ncua, thiab yuav tsum tau hloov lossis kho raws li qhov tsim nyog. Lub zog tseem ceeb rau lub tsev yuav tsum raug txiav tawm thaum lub sijhawm tsis siv.
• Yog hais tias ib tug breaker-hloov mus ncig ua si, ib qho luv luv Circuit Court, cov xov hlau kub hnyiab, thiab los yog lwm yam txawv txav tshwm sim thaum
  ua qhov ntsuas hluav taws xob, txiav kev sim tam sim ntawd. Teeb meem hauv chav tsev teeb meem kom pom qhov teeb meem ua ntej txuas ntxiv nrog kev sim lossis kev ua haujlwm.
• Tus hais lus yog tsim los siv rau hauv qhov chaw qhuav xwb.
• Thaum tsis siv, khaws cia rau hauv qhov chaw qhuav, zoo ventilated cia.

TshajVIEW

suav nrog cov khoom

• Active subwoofer nrog built-in tov khoom, 8" tsav tsheb (x1)
• Hais lus Kem - hais lus array nrog rau (6) 2.75" tsav tsheb (x1)
• Riser/Support Kem (x1)
• IEC Fais Fab Cable (x1)
• Travel Bag (x1)

TXOJ CAI & CONTROLS

Ua kev sib txuas

• Plug kev twb kev txuas rau INPUT 1 (CH1) - xyuas tias MIC / LINE hloov pauv qhov sib tw (Mic rau microphones thiab cov twj paj nruag, Kab rau cov khoom sib tov, cov keyboards, lossis cov twj paj nruag nrog cov khoom siv nquag).
• Plug kev twb kev txuas rau INPUT 2 (CH2) - txuas mus rau tib yam li nrog INPUT 1.
• Plug kev twb kev txuas rau INPUT 3 (CH3) - STEREO jack yog qhov zoo rau siv nrog lub xov tooj ntawm tes, lub xov tooj ntawm tes, lossis lub computer.
• 10dB LINE jacks yog qhov zoo rau siv nrog cov keyboard, nruas tshuab, lossis lwm yam khoom siv. Saib Bluetooth® Controls seem siv lub wireless ntaus ntawv ua qhov chaw rau INPUT 3.

HWJ HUAM UP

• Tig lub hwj chim rau txhua yam khoom siv ntsaws rau hauv Input 1 (CH1), Input 2 (CH2), lossis Aux Input (CH3) thiab xyuas kom lawv cov khoom tso tawm tau tig. (Feem ntau, lub suab zoo tshaj tuaj yeem ua tiav los ntawm kev xa cov khoom ntim tawm mus rau qhov siab tshaj plaws, tom qab ntawd ua qhov kev hloov pauv ntawm cov khoom siv nkag ntawm AS8).
• Fais fab rau AS8.
• Maj mam tig INPUT 1 (CH1) GAIN, INPUT 2 (CH2) GAIN, thiab INPUT 3 (CH3) nce mus rau qib uas xav tau.

POWER/CLIP LED THIAB TSEEM CEEB

• Qhov LED no ntawm AS8 feem ntau yuav tsum yog ntsuab thaum nws AC fais fab qaum txuas nrog lub qhov hluav taws xob, thiab lub hwj chim Hloov tau qhib.
• Yog hais tias lub LED no tas li tig liab, nws txhais tau hais tias ib qho ntawm cov input signals siab dhau lawm.
• Tig txhua lub tswv yim nce ntim pob qhov rooj nyob rau hauv lem kom pom qhov twg yog distorting, thiab teem lub pob qhov rooj rau clipping.

PHEM MONITOR APPLICATIONS

• Tig lub pob qhov sib npaug qis qis me ntsis kom txo qis qhov tsis xav tau rumble thiab qis-zaus buildup. Qhov no yuav txo cov lus tawm tswv yim thiab ua kom lub suab meej dua.
• Fais fab rau AS8. Maj mam tig INPUT 1 GAIN, INPUT 2 GAIN, thiab INPUT 3 GAIN mus rau qib uas xav tau.

LINKING NTAU TSHAJ PLAWS

• Yog txuas ntau tus neeg hais lus, txuas tag nrho cov tswv yim
  qhov chaw rau thawj AS8 mus rau LINE IN kev twb kev txuas ntawm AS8 tom ntej, thiab txuas ntxiv cov saw daisy
  mus AS8. (Qhov no yog qhov uas muaj ntau yam
  saib xyuas cov khoom sib xyaw sib koom ua ke ntawm cov khoom sib xyaw ua ke.)
• Txhawm rau kom tsis txhob "pops" thaum tig lub hwj chim rau / tawm, lub xeem AS8 yuav tsum tau siv lub zog kawg, thiab muab tso tawm ua ntej.

TXOJ CAI & CONTROLS

1. CHANNEL 1: Cov tswv yim no lees txais qhov sib npaug XLR plugs, thiab sib npaug / tsis sib npaug TRS (tip / nplhaib / tes tsho) 1/4 "plugs. Teem lub LINE/MIC hloov kom haum rau hom khoom siv uas yuav txuas nrog txhawm rau tiv thaiv kev cuam tshuam. Thaum siv qhov tsis sib npaug 1/4 "ntsuas ntsuas, pib nrog lub pob hauv LINE teeb tsa. Tom qab ntawd, yog tias qhov nce qis dhau, tig lub ntim qis, xaiv MIC, thiab maj mam tsa lub ntim.
2. CHANNEL 2: Cov tswv yim no lees txais qhov sib npaug XLR plugs, thiab sib npaug / tsis sib npaug TRS (tip / nplhaib / tes tsho) 1/4 "plugs. Teem lub GTR / MIC hloov kom haum rau hom ntaus ntawv uas yuav txuas nrog kom tsis txhob cuam tshuam.
   Thaum siv qhov tsis sib npaug 1/4 "ntsuas ntsuas, pib nrog lub pob hauv GTR teeb tsa. Tom qab ntawd, yog tias qhov nce qis dhau, tig lub ntim qis, xaiv MIC, thiab maj mam tsa lub ntim.
3. CHANNEL 3 QUB KNOB: Lub pob qhov rooj no teem lub ntim rau Channel 3.
4. CHANNEL 3 AUX JACKS: Lub me me 1/8 "jack yog rau kev sib txuas lub suab nrov zoo li lub xov tooj, lub computer, MP3, lossis CD player. Lub L (sab laug) thiab R (txoj cai) jacks tuaj yeem siv rau -10dB kab theem li cov keyboards lossis nruas tshuab. Rau qhov zoo tshaj plaws, tsis txhob siv 1/8 "thiab L / R jacks ib txhij.
5. CHANNEL 3 BT: Bluetooth® (BT).
6. CHANNEL 3 BLUETOOTH® tswj: Txhawm rau siv lub cuab yeej siv Bluetooth zoo li koj lub xov tooj lossis lub khoos phis tawj ua qhov chaw rau Input 3, koj yuav tsum xub "paj" nws nrog koj AS8. Saib rau ntu Kev teeb tsa ntawm phau ntawv no rau cov lus qhia ntxaws.
7. LOW THIAB HIGH EQ KNOBS: Lub pob qhov rooj LOW yuav muab +/- 12dB ntawm boost lossis txiav qis dua 100Hz. Tig qis qis kom ntxiv ntses bass thaj tsam lossis sov so rau tus neeg hais lus. Tig qis qis kom tshem tawm rumble thiab suab nrov thaum cov khoom siv tsis muaj qhov tsawg zaus, lossis thaum siv tus hais lus ua tus saib hauv pem teb. HIGH pob qhov rooj yuav muab +/-12dB ntawm boost, los yog txiav saum 10kHz. Tig HIGH mus ntxiv kom pom tseeb thiab txhais rau cov suab, suab paj nruag, lossis cov lem rov qab. Tig HIGH kom txo nws txoj kev xav lossis tawm tswv yim.
8. Hwj chim / Clip LED: Lub teeb ntsuab LED ntawm AS8 qhia tias AC fais fab qaum txuas nrog lub qhov hluav taws xob, thiab lub Hwj chim Hloov tau qhib. Yog tias koj pom cov LED liab thaum lub suab ua si rau hauv tus hais lus, qhov no qhia tau hais tias tus neeg hais lus tau dhau los, thiab tus limiter tau koom nrog. Yog hais tias CLIP LED yog tas li teeb, ua ntej txo qhov nce ntawm cov tswv yim raws.
9. LINE tawm 0.0dB: LINE OUT muab 0.0dB theem teeb liab thiab siv los txuas ntau yam AS8 ua ke siv tib lub suab teeb liab. Txuas tus LINE OUT ntawm thawj AS8 mus rau Kab Tawm ntawm AS8 tom ntej hauv txoj kev teeb liab.
10. TWS BUTTON: Saib rau ntu Kev teeb tsa ntawm phau ntawv no rau cov lus qhia ntxaws.
11. TWS LED
12. IEC POWER NPAJ: Lub IEC fais fab cable ntsaws ntsaws rau hauv lub jack no.
13. FUSE: Lub hwj chim yuav tsum raug muab tua thiab cov cuab yeej txiav tawm ntawm lub hwj chim ua ntej hloov lub fuse. Tsuas yog siv lub fuse nrog tib lub zog ntsuas, uas tau teev tseg rau hauv qab vaj huam sib luag.
14. Hwj chim: Tig lub AS8 fais fab ON lossis OFF.
    

INSTALLATION

TSIS TXAUS SIAB RAU KOJ yog tias koj tsis tsim nyog ua li ntawd!
INSTALLATION NTAWM QUALIFIED TECHNICIANS nkaus xwb

INSTALLATIONS yuav tsum tau kuaj xyuas los ntawm tus neeg tsim nyog ib xyoos ib zaug!

FLAMMABLE MATERIAL WARNING Khaws tus neeg hais lus kom deb li deb ntawm 5.0 feet (1.5m) deb ntawm cov khoom siv hluav taws xob thiab/lossis pyrotechnics.

ELECTRICAL CONNECTIONS Tus kws tshaj lij hluav taws xob tsim nyog yuav tsum ua kom tiav tag nrho cov kev sib txuas hluav taws xob thiab / lossis kev teeb tsa.

CEEB TOOM thaum lub hwj chim txuas nrog ntau tus neeg hais lus raws li lub hwj chim siv ntawm lwm tus neeg hais lus qauv tuaj yeem tshaj lub hwj chim tshaj tawm ntawm tus neeg hais lus no. KOM SILK SCREEN ntawm tus hais lus rau MAX AMPS.

CEEB TOOM! Kev nyab xeeb thiab tsim nyog ntawm txhua yam khoom nqa nqa, qhov chaw teeb tsa / lub platform, anchoring / rigging / mounting method, hardware, thiab hluav taws xob installation yog lub luag haujlwm ntawm tus installer.

Nruab tus neeg hais lus, tag nrho cov khoom siv hais lus, thiab tag nrho cov khoom siv thauj tog rau nkoj / rigging / mounting hardware raws li txhua lub zos, lub teb chaws, thiab lub teb chaws kev lag luam, hluav taws xob, thiab cov cai thiab kev tsim kho.

Nruab cov neeg hais lus hauv thaj chaw sab nraum txoj kev taug kev, chaw zaum, thiab lossis ib qho chaw uas lawv tuaj yeem ncav cuag cov pej xeem.

Ua txhua yam kev ceev faj tsim nyog thiab kev ntsuas kev nyab xeeb thaum muab cov cuab yeej siv rau hauv qhov chaw muaj kev phom sij, tshwj xeeb tshaj yog qhov kev nyab xeeb rau pej xeem muaj kev txhawj xeeb.

SETUP

ASSEMBLY

1. Muab lub cuab yeej tso rau hauv qhov chaw xav tau, thiab xyuas kom meej tias tus neeg hais lus tau teeb tsa hauv qhov chaw ruaj ntseg, ruaj khov.
2. Xyuas kom tseeb tias lub hwj chim hloov yog OFF.
3. Ua kom paub tseeb tias INPU GAIN 1, INPUT GAIN 2, thiab MASTER VOLUME poob qis.
4. Teem EQUILIZER pob qhov rooj rau nruab nrab (12 teev).
5. Ntxig tus Riser/Support Kem rau hauv sub.
6. Ntxig Cov Lus Qhia rau hauv Riser/Support Kum.

SETUP

BLUETOOTH kev sib txuas: Txhawm rau siv Bluetooth-enabled ntaus ntawv zoo li koj lub xov tooj lossis lub khoos phis tawj ua qhov chaw rau Input 3, koj yuav tsum xub "paj" nws nrog koj AS8.

1. Fais fab rau koj AS8 thiab pab Bluetooth ntawm koj lub hauv paus khoom siv (xov tooj, khoos phis tawj, lossis lwm yam khoom siv txawb).
2. Los ntawm koj lub hauv paus ntaus ntawv, tso saib nws cov npe ntawm cov khoom siv Bluetooth pom thiab nrhiav "AVANTE AS8" nyob ntawd. Yog tias koj lub cuab yeej nrhiav tsis tau tus hais lus, sim scrolling rau hauv daim ntawv kom paub tseeb tias nws tsis tau muab zais tawm ntawm qhov screen. Yog tias nws tsis tau teev tseg, thawb thiab tso khawm PAIR / ua si / ncua ntawm koj AS8.
3. Thaum "AVANTE AS8" tshwm rau ntawm daim ntawv, xaiv nws. Koj lub hauv paus khoom siv thiab koj AS8 yuav ua khub, thiab AS8 yuav chim thiab teeb lub Bluetooth LED los qhia tias kev sib txuas ua tiav.
4. Ua si suab los ntawm koj lub cuab yeej Bluetooth, thiab tam sim no nws yuav ua si ntawm INPUT 3 ntawm koj AS8 raws li Bluetooth LED maj mam flashes.
5. Nias lub PAIR/play/pause khawm tam sim no remotely tswj qhov kev ua si / ncua kev ua ntawm koj lub cuab yeej, nrog Bluetooth LED flashing thaum ua si, thiab khoom thaum nres.
6. Txhawm rau "tshem tawm" koj lub cuab yeej Bluetooth los ntawm Input 3, nias thiab tuav lub khawm PAIR/play/pause. LED yuav tua thiab koj yuav hnov ​​​​lub suab nrov.
7. Thaum koj lub hwj chim ntawm koj AS8, nws yuav nrhiav ib qho khoom ua ke yav dhau los, thiab ua ke nrog nws tau yog tias muaj.

TWS INSTRUCTIONS:

1. Fais fab rau cov neeg hais lus, thiab nias lub pob PAIR txhawm rau ua khub txhua tus hais lus. Cov neeg hais lus tsis muaj
   yuav tsum tau ua khub hauv ib qho kev txiav txim tshwj xeeb, thiab ob qho tib si yuav tsum muaj rau kev ua khub.
2. Siv lub pob TWS ntawm txhua tus hais lus los txiav txim seb tus neeg hais lus twg yog tus thawj (sab laug channel) thiab
   uas yog tus hais lus thib ob (txoj cai channel). Tus neeg hais lus uas TWS khawm tau nias ua ntej
   yuav raug teem ua thawj tus hais lus. Thaum TWS teeb ntawm ob tus neeg hais lus flash, TWS nta
   ob tus neeg hais lus no yuav txuas nrog, thiab PAIR lub teeb ntawm tus hais lus thib ob yuav raug kaw. Tus hais lus thib ob yuav tsis muaj rau kev ua khub.
3. Qhib Bluetooth ntawm koj lub xov tooj ntawm tes, tshawb nrhiav thawj tus hais lus thiab txuas nrog nws.

Nco tseg:

• Nias lub PAIR khawm kom qhib Bluetooth. Yog tias PAIR qhov taw qhia blinks, tus neeg hais lus tam sim no nyob rau hauv kev ua khub. Yog hais tias tus neeg hais lus tsis txuas nrog ib qho khoom siv (xws li TWS txuas) hauv 5
  feeb, PAIR qhov taw qhia hloov tawm thiab tus neeg hais lus yuav cia li tawm ntawm kev sib koom ua ke. Thaum koj siv tus neeg hais lus hauv ib hom, yog tias nws lub pob TWS raug nias, TWS lub teeb yuav ntsais rau 2 feeb ces nws yuav txiav tawm, uas yuav tsis cuam tshuam rau tus neeg hais lus lub peev xwm ua haujlwm hauv ib hom.
• Nyob rau hauv ib hom lus hais, cov zis ntawm L + R raws yuav sib xyaw. Thaum koj txuas ob
  hais lus nrog TWS, thawj tus hais lus yog sab laug thiab tus hais lus thib ob yog txoj cai.
• Txhawm rau tawm TWS hom, nias lub pob TWS ntawm ob tus neeg hais lus. Tus neeg hais lus thib ob yuav raug tso tawm thiab nkag mus rau kev sib koom ua ke.
• Yog tias TWS kev twb kev txuas tsis raug txiav los ntawm nias lub pob TWS, ob tus neeg hais lus 'TWS yuav raug txuas ncaj qha tom qab nias lub khawm PAIR thaum tus hais lus qhib.
• Yog tias ob tus neeg hais lus txuas nrog TWS, koj tuaj yeem nias lub khawm PAIR ntawm ob tus neeg hais lus kom kaw lawv lub Bluetooth tib lub sijhawm.

FREQUENCY chart

TXOJ KEV HLUB

Mixer thiab amplifier yuav tsis qhib.

Xyuas seb cov hlua hluav taws xob uas suav nrog puas txuas rau hauv lub qhov hluav taws xob ua haujlwm.

Amplifier tua tam sim ntawd.

Xyuas seb puas muaj ib qho ntawm cov cuab yeej vents raug thaiv. Vim tias qhov cua tsis txaus yuav ua rau lub cuab yeej ua kom sov, tua lub tov khoom thiab nthuav tawm cov vents kom tso cai rau cov khoom thiab nws sab hauv. amplifier kom txias.

Tom qab ob peb feeb, cov khoom yuav tsum rov pib dua nws tus kheej thiab tuaj yeem rov qab mus rau qhov qub playback.

Lub POWER/CLIP LED yog flashing tsis tu ncua.

Yog hais tias lub hwj chim / clip LED flashing, lub amplifier yog siv dhau ntawm nws cov peev txheej tsim. Tua thiab qhib thiab rov pib playback.

Tsis muaj suab los ntawm tus neeg hais lus.

Txheeb xyuas tias cov cuab yeej sab nraud thiab / lossis lub microphones txuas nrog raug rau cov khoom siv, cov ntawd
cov chaw yog powered on, thiab hais tias tag nrho cov cabling yog haumxeeb. Txheeb xyuas tias qhov kev nkag tau txais kev tswj hwm ntawm tag nrho cov khoom siv nkag tau raug teeb tsa kom tsim nyog. Yog tias siv Bluetooth®, xyuas kom meej tias AUX / BLUETOOTH hloov teeb yog rau Bluetooth, tias koj lub hauv paus khoom siv thiab AS8 tau ua tiav ua ke, thiab tias koj lub cuab yeej siv tseem ua haujlwm (tsis tsaug zog lossis tawm ntawm lub roj teeb lub zog) thiab suab nrog nws cov zis theem. tswj tau teeb tsa rau qib suab.

Distortion / suab nrov nyob rau hauv lub suab teeb liab, los yog qis tso zis theem.

Koj feem ntau yuav tau txais lub suab qis tshaj plaws (hiss) los ntawm kev teeb tsa cov khoom tso tawm rau max, thiab tom qab ntawd ua
ib qho kev txo qis ntawm qhov ntim ntawm AS8 cov tswv yim nce pob qhov rooj. Txheeb xyuas tias cov qib tso zis ntawm ib qho khoom siv tau teeb tsa kom tsim nyog, thiab cov kev tswj hwm ntawm INPUT GAIN rau txhua qhov kev nkag tau raug teeb tsa rau qib tsim nyog. Txheeb xyuas tias MIC / LINE keyboards ntawm txhua qhov kev tawm tswv yim tau teeb tsa kom tsim nyog, thiab. Xyuas seb ob lub STEREO jack thiab -10dB LINE IN jacks ntawm INPUT 3 puas tau siv (txuas) tib lub sijhawm. Yog hais tias lub hwj chim / CLIP LED yog teeb pom kev zoo, sim kho txhua qhov kev sib tw GAIN nyob rau hauv lem kom pom qhov twg yog lub hauv paus ntawm clipping.

Lub suab nrov dhau thaum lub suab tshaj tawm.

Xyuas seb qhov INPUT GAIN theem rau lub mic input yog teem siab dhau lawm, los yog seb cov qib rau koj lwm yam inputs yog teem tsawg heev, xws li nyob rau hauv lub qhov chaw ntaus ntawv, los yog nyob rau hauv lawv cov INPUT GAIN tswj.

Tawm ntawm qhov ua tau zoo Bluetooth® suab ntau ntawm lub cuab yeej.

Cov kab-ntawm-pob pom muaj txiaj ntsig zoo txog li 50 feet. Lub wireless kev ua tau zoo ntawm lub cuab yeej yog cuam tshuam los ntawm phab ntsa lossis hlau, cuam tshuam los ntawm WiFi, lossis lwm yam khoom siv wireless.

DIMENSIONAL DRAWINGS

TECHNICAL SPECIFICATIONS

AMPTeeb Meem:

• Cov tswv yim: Ob lub XLR / TRS combo jacks, Stereo 1/4 "inputs, Stereo 1/8" input, Bluetooth®
• Cov zis: XLR balanced kab tso zis
• Lub zog tso zis: RMS 250W (SUB) RMS, 1000W ncov
• Ntim: Input Gain tswj ib channel
• EQ: Qhov tseem ceeb tawm 2 band EQ
• LEDs: Fais fab/Clip qhia
• Lub zog nkag: 100-240V~50/60Hz 250W
• Ampua neej nyob: Chav Kawm D ampua neej nyob

ACTIVE VENTED SUBWOOFER:

• Zaus teb: 55-200Hz
• Max Cov zis SPL: 116 dB (ntawm max. amp tso zis)
• Impedance: 4 awm
• Tus tsav tsheb: 8-nti neodymium subwoofer, 1.5" suab coil, 28 oz. hlau nplaum
• Txee: PP yas
• Grill: 1.0mm hlau
• Qhov Loj: 13.8 "x 16.9" x 16.3 " / 350mm x 430mm x 413mm
• Qhov hnyav: 24lb ua. / 10.8kg.

PASSIVE FULL-RANGE hais lus COLUMN:

• Zaus teb: 180-20 kHz
• Max. tso zis SPL: 110dB ib
• Impedance: 4 awm
• Tus tsav tsheb: 6 x 2.75-nti neodymium tsav tsheb
• Txee: PP yas
• Grill: 1.0mm hlau
• Qhov Loj: 3.8 "x 3.8" x 34.3" / 96x96x870mm (txhua kab)
• Qhov hnyav: 11 lbs. / 5 kg. (txhua kab)

TSHEB VAJ HUAM SIB LUAG:

• 4 input tov khoom nrog kab tawm
• Ob (2) Mic/Line Input (XLR/TRS Combo)
• Ob (2) Guitar / Kab Input (1/4 "Stereo)
• 1/8" Stereo Aux Input
• Kab tso zis (XLR)
• Dual Band EQ
• BLUETOOTH® Kev sib txuas

EXTENDED POSITION:

• Qhov Loj: 13.8”x16.9”x79.1” / 350x430x2010mm
• Qhov hnyav: 35lb ua. / 15.8kg.

COMPACT POSITION:

• Qhov Loj: 13.8”x16.9”x47.6” / 350x430x1210mm
• Qhov hnyav: 30lb ua. / 13.6kg.

COMPONENTS & ACCESSORIES

SKU: DESCRIPTION
WM 219: WM-219 Wireless Microphone System
WM 419: WM-419 Wireless Microphone System
TSI 564: VPS-80 Microphone
TSI 916: VPS-60 Microphone
TSI 205: VPS-20 Microphone
PWR 571: Pow-R Bar65

Cov ntaub ntawv / Cov ntaub ntawv

AVANTEK AS8 Active Kab Array PA System [ua pdf] Tus neeg siv phau ntawv AS8 Active Line Array PA System, AS8, Active Line Array PA System, Kab Array PA System, Array PA System, PA System

Cov ntaub ntawv

• Cov neeg siv phau ntawv